0 Bewertungen0% fanden dieses Dokument nützlich (0 Abstimmungen)
61 Ansichten0 Seiten
This document provides instructions for installing and accessing an IP camera. It outlines the following steps:
1. Connect the IP camera to a router via Ethernet and power it on. Also connect a computer to the same router.
2. Use a web browser to search for the IP camera and configure settings like the IP address to match the computer.
3. Access the camera internally or externally using the LAN or WAN address shown. Log in using the default username and password.
This document provides instructions for installing and accessing an IP camera. It outlines the following steps:
1. Connect the IP camera to a router via Ethernet and power it on. Also connect a computer to the same router.
2. Use a web browser to search for the IP camera and configure settings like the IP address to match the computer.
3. Access the camera internally or externally using the LAN or WAN address shown. Log in using the default username and password.
Copyright:
Attribution Non-Commercial (BY-NC)
Verfügbare Formate
Als PDF, TXT herunterladen oder online auf Scribd lesen
This document provides instructions for installing and accessing an IP camera. It outlines the following steps:
1. Connect the IP camera to a router via Ethernet and power it on. Also connect a computer to the same router.
2. Use a web browser to search for the IP camera and configure settings like the IP address to match the computer.
3. Access the camera internally or externally using the LAN or WAN address shown. Log in using the default username and password.
Copyright:
Attribution Non-Commercial (BY-NC)
Verfügbare Formate
Als PDF, TXT herunterladen oder online auf Scribd lesen
1.Hardware Connection This IP Camera and its software are designed for WindowsXP / Vista / Windows7. Please follow these instructions to install and use your new device.
a) Connect the IP Camera to your router via standard RJ 45 network cable, and plug it into the mains supply. Your computer should be connected to the router.
b) Position the IP Camera in a suitable location.
2. Access IP Camera Via Web browser
a) Insert the software disc into your computer, it will run automatically and the interface will pop up as picture 1,double click Search IP Camera , select Advance Mode to set the IP Camera.
(Picture 1) (Picture 2)
b) Keep the gateway, DNS server, IP address of the IP camera synchronous with the current computer, if not, click update to finish the setting, then click open via inner access.
Inner Access refers to the LAN access address; Outer Access refers the WAN access address. (refer to picture 3)
QFSE-E-A1 2
(Picture 3) (Picture 4) c) There are four login modes:Active Mode for IE browser, Server Push Mode for firefox,Google Brower, Mobile Phone mode for mobile browser that support J avascript, Ipod touch/iphone 2G,3G,3GS,4 and Ipad dedicated mode for apple series products. d) Select one mode as your requiments to sign in. Then the login interface will appear as picture 5. Enter the user name and password ,then click ok to sign in . If you select ActiveX mode, you have to install the activex before you access the IP camera for the first time.(You can find the activeX in the CD or just install it when installation pop-up appear when signing in) After that ,you can view the IP camera as Picture 6. Note: Default user name :admin, Default password:(blank)
(Picture 5)
Record Snapshot Listen Talk e) Before outer access, please refer to your routers user manual for how to open ports to allow internet access to the camera. f) After finishing installing, you can control the IP camera via pan/tilt, take a snapshot, record, listen and talk on the web UI, also can adjust resolution,mode,brightness,contrast as you like.
Raspberry Pi For Beginners: How to get the most out of your raspberry pi, including raspberry pi basics, tips and tricks, raspberry pi projects, and more!