Beruflich Dokumente
Kultur Dokumente
Page 1
www.thailandhotelier.com
Healthy Employees + Healthy Organizations = Healthy Workplaces
There is a strong connection between the health and well being of people and
their work environments. When people feel valued, respected and satisfied in
their jobs and work in safe, healthy environments, they are more likely to be
more productive and committed to their work. When the workplace is unsafe,
stressful or unhealthy, ultimately both the organization and the employees are
hurt. Everyone can benefit from a healthy workplace.
The goal of this workshop is to make information, tools and resources easily
available that will help employees, employers and practitioners participate in
making their workplaces healthy and safe.
Page 2
www.thailandhotelier.com
Cook
The main duties of cooks in restaurants, hotels, healthcare facilities and schools include the
following:
• Plan and prepare menus, and determine food portions and quantities needed.
• Pay attention to special dietary needs, if applicable.
• Monitor and order supplies.
• Clean up kitchen or work area.
• Supervise kitchen staff.
Working with food presents its own unique set of potential hazards. Some of the main ones are:
Page 3
www.thailandhotelier.com
Food and Beverage servers
The duties of servers, table wait staff, hostesses, "bus-boys," and other food and hospitality
personnel vary according to the workplace. The following is a general summary of duties
these people have in common:
• Greet customers.
• Take orders and relay them to kitchen and bar staff.
• Pay attention to customers' special menu and dietary needs or restrictions, when
applicable.
• Serve food or drinks to customers.
• Clean up tables or kitchen.
•
What are some health and safety issues of servers?
Work environments such as restaurants, hotels and bars, where food and beverages are
served, present a unique set of hazards.
Page 4
www.thailandhotelier.com
Housekeeping
Housekeeping in a hotel is a very physically demanding job that includes many, varied tasks.
Typically, in this case study, housekeepers were responsible for cleaning 16 rooms per shift. The
actual amount of work depends on the size of the room and the number of beds. A
housekeeper needs between fifteen and thirty minutes to do one room. A housekeeper carries
out the following tasks:
Figure 1a Figure 1c
Figure 1b
Making Beds
Figure 2 Figure 3a
The main risk factors for repetitive motion injuries (RMIs) in housekeeping are:
• heavy physical workload and excessive bodily motions which are a high risk for back
injuries and
• forceful upper limb motions in awkward positions which are a high risk for neck or
shoulder and arm injuries.
Page 5
www.thailandhotelier.com
Space limitations require workers to use many uncomfortable postures. These are:
• standing or walking,
• stooping,
• squatting,
• kneeling,
• stretching,
• reaching,
• bending,
• twisting, and
• crouching.
A housekeeper changes body position every three seconds while cleaning a room. If we assume
that the average cleaning time for each room is twenty-five minutes, we can estimate that a
housekeeper assumes 8,000 different body postures every shift.
In addition, forceful movements while using awkward body positions include lifting mattresses,
cleaning tiles, and vacuuming every shift. Housekeeping is a physically demanding and very
tiring job. It can be classified as "moderately heavy" to "heavy" work because the energy
required is approximately 4 kilocalories per minute (4 kcal/min.)
Hotel housekeepers work in a unique place. Hotels are usually designed for the comfort of their
guests rather than their housekeeping staff. This fact makes it very difficult to improve working
conditions for housekeepers by means of better engineering. However, some improvements can
be made by selecting more appropriate equipment.
Lighter vacuum cleaners (preferably the self-propelling type), and lighter service carts with
wheels designed for carpeted floors would ease the workload for their operators providing this
equipment is always kept in good repair. When new vacuum cleaners are purchased, low noise
emissions should be one of the criteria.
Improving the body postures that pose a major risk for musculoskeletal disorders seems an
unachievable task. Again, this fact results from the peculiarity of hotels as a workplace. To
attract guests and remain competitive, hotel management pursues a policy that everything
should be "so clean it sparkles". Floors, walls, windows, mirrors, and bathroom fixtures might be
adequately cleaned with some form of an extension tool to reduce bending and over-
stretching. However, the demand for spotless cleanliness and hygiene, management often
requires their cleaning staff to spend extra time and effort cleaning by kneeling, leaning,
squatting, crouching, slouching and stretching. These postures will in time contribute to new
musculoskeletal injuries and aggravate old ones.
New approaches, other than strictly ergonomic ones, need to be investigated. For example,
action can be taken from the administrative level. Options for improvement include:
• job rotation,
• job enrichment and job enlargement,
• team work, and
• education and training on work practices.
Page 6
www.thailandhotelier.com
How can job rotation reduce the risk for RMI?
Job rotation is one possible approach. It requires workers to move between different tasks, at
fixed or irregular periods. However, it must be a rotation where workers do something completely
different. Different tasks must use different muscle groups to allow muscles already stressed to
recover.
How can job enlargement and enrichment reduce the risk for RMI?
Another approach is job enlargement. This increases the variety of tasks built into the job. It
breaks the monotony of the job and avoids overloading one part of the body. Job enrichment
involves more autonomy and control for the worker.
Team work can provide greater variety and more evenly distributed muscular work. The whole
team is involved in the planning of the work. Each team member carries out a set of operations
to complete the whole product, allowing the worker to alternate between tasks. This reduces the
risk of RMI.
How can improved work practices reduce the risk for RMI?
A well-designed job, supported by a well-designed workplace and proper tools, allows the
worker to avoid unnecessary motion of the neck, shoulders and upper limbs. However, the
actual performance of the tasks depends on individuals.
Training should be provided for workers who are involved with housekeeping activities. It is
important that housekeeping staff be informed about hazards in the workplace, including the risk
of injuries to the musculoskeletal system. Therefore, identification of the hazards for such injury at
any given hotel is fundamental.
Individual work practices, including lifting habits, are shaped by proper training. Training should
encourage employers and workers to adopt methods that reduce fatigue. For example, it is
advisable to plan one's workload and do the heavier tasks at the beginning of the workshift,
rather than at the end, when fatigue is at its maximum. When a person is tired, the risk of injuring
a muscle is higher.
Training should also explain the health hazards of improper lifting and give recommendations on
what a worker can do to improve lifting positions. Training should also emphasize the importance
of rest periods for the workers' health and explain how active rest can do more for keeping
workers healthy than passive rest. The effect of such training can reach far beyond occupational
situations because the workers can apply this knowledge also in their off-job lives.
Page 7
www.thailandhotelier.com
Hotel laundry
Work in this case study of a hotel laundry is divided into two operations done by two separate
groups of workers. Sorting, washing and drying towels is completed by one group of two workers.
Drying (except for towels) and folding is completed by another group of six workers.
In this hotel, housekeepers use a laundry chute to get the dirty linen from the upstairs down to
the laundry area. The sorting and washing operation involves the following:
• sorting laundry
• loading bins which weigh 60 pounds of dry laundry, and 120 pounds when wet
• transporting (pushing/pulling) bins to washer
• loading washer
• unloading washer
• transporting (pushing/pulling) bins to dryer (towels only)
• loading dryer with towels
• unloading towels from the dryer
Page 8
www.thailandhotelier.com
The handling of the laundry requires the use of considerable force:
These movements are particularly stressful on the hands, wrists and shoulders.
The RMI section of OSH Answers has more information on general ergonomic RMI risk
factors. Carrying out the sorting and washing tasks can be hazardous to the workers. There are
three major risk factors:
• The heavy work load (handling over 2 tonnes of laundry per shift) combined with bodily
motions beyond safe ranges create risk for back injuries.
• Frequent and forceful movements (while pulling/pushing the laundry) and forceful grips
create a high risk for wrist and other upper limb injuries.
• Working while standing/walking on a hard floor creates the risk for lower leg discomfort,
and accelerates the development of fatigue.
These factors have a compounding effect. In other words, each of them increases the effect of
the others
Page 9
www.thailandhotelier.com
What are the tasks involved in "Drying and Folding"?
In this operation there are three workstations at which five different tasks are performed:
As an example, to feed the roller dryer with small laundry such as pillow cases (Figure 6), a worker
performs the following tasks:
Page 10
www.thailandhotelier.com
To feed the dryer with laundry such as bed sheets, two workers form a
team (Figure 7). This task involves the following:
Several aspects of feeding the dryer with both small and large pieces of laundry pose the risks for
repetitive motion injuries. Workers are at a high risk for upper arm, neck and shoulder injuries
because of limited control over the pace of work, highly repetitious movements (one task lasts
approximately 3 to 8 seconds), working with arms at or above shoulder level, and hand
manipulation while handling the laundry. Bending and twisting, reaching forward and upward,
and standing in a leaning-forward position contribute to low back pain. Prolonged standing on a
hard floor contributes to lower leg discomfort and speeds up the development of muscular
fatigue. All of these factors have a compounding effect. In other words, each of them increases
the effect of the others.
To retrieve small laundry such as pillow cases from the regular dryer (Figure
8) a worker performs the following tasks:
To retrieve big pieces of laundry such as bedsheets, which come out of the
dryer partially folded (Figure 13), a worker performs the following
movements:
Workers involved in retrieving small pieces of laundry are at risk for repetitive motion injuries. The
hazardous conditions are:
Page 11
www.thailandhotelier.com
The lack of control over the pace of work, highly repetitious movements, constrained work
posture, and extended arms while working create a high risk for RMIs. Neck, shoulders and upper
arms are at the highest risk for injuries. Leaning forward, over-reaching and prolonged standing in
a restricted position put workers at high risk for low back injury. Prolonged standing on a hard
floor contributes to lower leg discomfort and speeds up the development of muscular fatigue. All
of these factors have a compounding effect. In other words, each of them increases the effect
of the others.
Workers involved in retrieving big pieces of laundry are at risk for repetitive motion injuries,
including low back pain. The hazardous conditions are:
Contributing factors are prolonged, restricted, and stooped working positions and bending.
There is also a risk for injuries of the neck and shoulders. Prolonged standing on a hard floor
contributes to lower leg discomfort and speeds up the development of muscular fatigue. All of
these factors have a compounding effect. In other words, each of them increases the effect of
the others.
General
Continual twisting and reaching while working with extended arms can contribute to the
development of repetitive motion injuries. However, the risk for such injuries while folding towels is
somewhat lower when drying and folding of bedsheets and pillow cases. Some control over the
pace of work and some flexibility in the working postures are responsible for the reduced risk.
Let's see how we can improve the operations in this hotel laundry facility:
In the laundry processing plant, the sorting and washing operations are typically manual material
handling tasks. These tasks pose the risk for low back pain.
Manual material handling cannot be fully eliminated but it is possible to reduce it by reorganizing
the flow of work. For example, instead of sorting towels and linen before loading them into the
bins, it would be preferable to load the laundry in the bins directly from the pile under the chute.
This would eliminate handling the same laundry twice.
Page 12
www.thailandhotelier.com
To reduce bending while reaching for the laundry at the bottom of the bins, it would be
advisable to use different types of bins. For example, a bin with one side that opens
mounted on a moveable tilt/lift table (Figure 14).
To reduce pulling and pushing while manoeuvering the bins full of laundry, it would be
advisable to use lighter bins with wheels designed for hard floors. In addition, the bins
should be maintained regularly with particular attention to the wheels.
Working in the sorting and washing areas requires standing on a concrete floor. Since the
application of anti-fatigue matting is not practical, workers should wear shoes that provide good
cushioning or they should use proper inserts to lessen the stress on the feet and on the lower
back.
The overall workload, poor layout of the work station, improper design of the laundry bins and
the repetitiveness of the work are the major risk factors for repetitive motion injuries in the drying
and folding job.
Providing bins with one side that opens on elevating devices would reduce bending and other
awkward body positions while reaching for towels at the bottom of the bins.
To reduce awkward body positions such as reaching above shoulder level while feeding the
dryer, it would be advisable to use a platform. Narrowing the counter that separates the worker
from the dryer would reduce reaching forward.
Page 13
www.thailandhotelier.com
Partially folded bedsheets coming out of the dryer should be collected in a
basket (Figure 16) so that when completing the folding operation, a
worker can use a counter of appropriate height and reduce excessive
bending.
General Recommendations
One of the main risk factors for repetitive motion injuries in the laundry is the repetitiveness of the
work. To change the repetitive patterns of work, we need to do different tasks. Job rotation and
team work are two options that allow workers to vary tasks.
Job rotation requires workers to move between different tasks at fixed or irregular periods of time.
Workers in the laundry cannot fully benefit from job rotation because all the tasks are similar in
nature. Still, the feeling of change reduces monotony and slows down the development of
fatigue.
In team work, workers form a team and each member of the team shares several different tasks.
The whole team is involved in the planning of the work. The team controls all aspects of work. This
improves attitude and job satisfaction, which are important factors in the prevention of
occupational diseases.
Page 14
www.thailandhotelier.com
Office general
Office staff may type or file documents, correspondence, reports, statements and other
material. Their workstation usually has a computer/VDT and telephone, among other equipment.
What are some health and safety issues for office workers?
Although office environments don't usually present the same physical hazards as some of the
more safety-critical industries, there are other hazards to be aware of:
• Learn about how to avoid musculoskeletal pain or injury from repetitive or physically
awkward tasks. Take breaks as needed. (Appendix 1)
• Learn safe lifting techniques. (Appendix 2)
• Keep all work areas clear of clutter.
Page 15
www.thailandhotelier.com
Landscaper
Under the label "landscaper" we are referring to gardeners, greenkeepers, lawn care specialists
and horticultural workers. These people work in businesses or homes, indoors or outdoors.
• Plan, create and maintain landscaped environments, which may include flowers, plants,
trees, lawns, fences, decks, patios or water features.
• Prepare and spray chemical mixtures using various types of equipment.
• Operate powered equipment and hand tools.
Depending on exact occupation or geographic location, the following are possible risks:
Page 16
www.thailandhotelier.com
Electrician
Electricians work in commercial, industrial or residential settings. Some of their main duties are to:
Electricians work in a variety of settings and may be exposed to several hazards, including:
Page 17
www.thailandhotelier.com
Carpenter
A carpenter builds or repairs various structures, working primarily with wood. Some of a
carpenter's main duties are to:
Carpenters face their own unique set of occupational hazards. These include the following:
Page 18
www.thailandhotelier.com
Appendix 1
WMSDs are recognized as leading causes of significant human suffering, loss of productivity, and
economic burdens on society. However, we do not have reliable estimates of the number of
WMSDs in Canada. The data available are limited and does not represent the magnitude of the
problem because there is a great deal of under-reporting of these types of injuries. For example,
over 20,000 Ontario workers received compensation in 1987 for new cases of WMSDs,
accounting for about 600,000 days of lost work. In British Columbia, over half the industrial
disease claims are due to WMSDs. A survey of cashiers throughout B.C., performed by Simon
Fraser University and the United Food and Commercial Workers in 1982, indicated that over 30%
of the work force surveyed suffered a form of WMSD.
WMSDs arise from ordinary arm and hand movements such as bending, straightening, gripping,
holding, twisting, clenching and reaching. These common movements are not particularly
harmful in the ordinary activities of daily life. What makes them hazardous in work situations is the
continual repetition, often in a forceful manner, and most of all, the speed of the movements
and the lack of time for recovery between them. WMSDs are associated with work patterns that
include:
Generally, none of these factors acts separately to cause WMSD. WMSDs commonly occur as a
result of a combination and interaction among them.
Body Position
There are two aspects of body position (posture) that contribute to injuries in jobs involving
repetitive tasks.
The first relates to the position of the part of the body that performs the actual task, usually the
upper limb. For example, tasks that require repetitive movements to the extreme ranges of the
joint in the wrist, elbow or shoulder contribute to the occurrence of a painful condition in those
areas. Table 1 gives examples of such movements. Poor layout of the workstation and improper
selection of equipment and tools can lead to these hazardous body movements.
Page 19
www.thailandhotelier.com
Table 1
repetitive, horizontal or vertical movements of the wrist to the extreme ranges (Fig. 1A)
wrist and palm
moving fingers while the wrist is in an extreme position (Fig. 1B,1C)
repetitive bending or straightening of the elbow from its neutral position (at a right angle)
elbow
twisting the wrist and forearm (Fig. 2)
The other postural aspect that contributes to WMSD is a fixed position of the neck and the
shoulders. To perform any controlled movement of an upper limb, the worker must stabilize the
shoulder-neck region. Muscles in the shoulder and the neck contract and stay contracted to
hold the position stable for as long as the task requires. The contracted muscles squeeze the
blood vessels. This restricts the flow of blood all the way down to the working muscles of the hand
where the blood, because of the intense muscular effort, is needed the most. The result is
twofold. The neck-shoulder muscles become fatigued, even though there is no movement. This
contributes to pain in the neck area. At the same time, the reduced blood supply to the
remaining parts of the upper limb accelerates fatigue in the moving muscles, making them more
susceptible to injury.
Page 20
www.thailandhotelier.com
Repetition
Workers performing highly repetitive tasks are at the highest risk for WMSD. This shows that
repetition of movements, although it never acts separately, is most likely the strongest risk factor.
Tasks requiring repetitive movements always involve other risk factors for WMSD such as fixed
body position and force: the worker, in order to perform the task, has to maintain the shoulder
and neck in a fixed position and to exert some force.
Work involving movement repeated over and over again is very tiring. This is because the worker
cannot fully recover in the short periods of time that are given between tasks. With time, the
effort to maintain the repetitive movements, even if they involve minimal forces, steadily
increases. When the work activity is continued in spite of the developing fatigue, injuries occur.
Force
The force required to do the task also plays an important role in the onset of WMSD. More force
equals more muscular effort, and consequently, a longer time is needed to recover between
tasks. Since in repetitive work, as a rule, there is not sufficient time for recovery, the more forceful
movements develop fatigue much faster. Exerting force in certain hand positions is particularly
Page 21
www.thailandhotelier.com
hazardous (Fig. 1A-4F). The amount of force needed depends on the weight of the tools and
objects that the worker is required to operate or move, and their placement in relation to the
worker's body. More strength has to be used, the farther away from the body the force has to be
applied. The shape of the tool plays an important role, also. Tools that do not allow the best
position of the wrist, elbow and shoulder substantially increase the force required. Worn and
poorly maintained tools are very important as well, yet often overlooked. For example, a worn
screwdriver, pliers with worn jaws, or dull scissors can increase the operating force as much as
tenfold.
Press
Pinch
Figures 4C and 4D - Exerting force in various hand positions
grasp
Figures 4E and 4F - Exerting force in various hand positions
Page 22
www.thailandhotelier.com
Pace of Work
Pace of work determines the amount of time available for rest and recovery of the body
between cycles of a particular task. The faster the pace, the less time is available and the higher
the risk for WMSD.
When the worker has no control over timing and speed of work because of external factors like
assembly line speed or quota systems then stress level increases. With higher stress level comes
muscle tension causing fatigue and again increased risk for WMSD. Controlling the pace of work
externally denies the worker the flexibility to determine their own work speed. It is a human
characteristic to work at varying rates at different times of the day.
Temperature and humidity affect the worker performing repetitive work. When it is too hot and
too humid, the workers tire more quickly and thereby become more susceptible to injury. On the
other hand, cold temperatures decrease the flexibility of muscles and joints, increasing the
likelihood of injury of any kind.
Vibration affects tendons, muscles, joints, and nerves. Workers using vibrating tools may
experience numbness of the fingers, loss of touch and grip, and pain. For more information on
this subject, refer to OSH Answers document Raynaud's Phenomenon.
WMSDs do not happen as a result of a single accident or injury. Rather, they develop gradually
as a result of repeated trauma. Excessive stretching of muscles and tendons can cause injuries
that only last a short time. But repeated episodes of stretching causing tissue inflammation can
lead to long-lasting injury or WMSDs.
• muscle injury
• tendon injury
• nerve injury
Muscle Injury
When muscles contract, they use chemical energy from sugars and produce by-products such
as lactic acid which are removed by the blood. A muscle contraction that lasts a long time
reduces the blood flow. Consequently, the substances produced by the muscles are not
removed fast enough, and they accumulate. The accumulation of these substances irritates
muscles and causes pain. The severity of the pain depends on the duration of the muscle
contractions and the amount of time between activities for the muscles to get rid of those
irritating substances.
Page 23
www.thailandhotelier.com
Tendon Injury
The inner walls of the sheaths contain cells that produce a slippery fluid to lubricate
the tendon. With repetitive or excessive movement of the hand, the lubrication
system may malfunction. It may not produce enough fluid, or it may produce a
fluid with poor lubricating qualities. Failure of the lubricating system creates friction
between the tendon and its sheath, causing inflammation and swelling of the
tendon area. Repeated episodes of inflammation cause fibrous tissue to form. The
fibrous tissue thickens the tendon sheath, and hinders tendon movement.
Inflammation of the tendon sheath is known as tenosynovitis.
When inflamed, a tendon sheath may swell up with lubricating fluid and cause a bump under
the skin. This is referred to as a ganglion cyst.
Tendons without sheaths are vulnerable to repetitive motions and awkward postures. In fact,
when a tendon is repeatedly tensed, some of its fibres can tear apart. The tendon becomes
thickened and bumpy, causing inflammation. Tendonitis is the general term indicating
inflammation of the tendon. In some cases, such as in the shoulder, tendons pass through a
narrow space between bones. A sac called the bursa filled with lubricating fluid is inserted
between the tendons and the bones as an anti-friction device. As the tendons become
increasingly thickened and bumpy, the bursa is subject to a lot of friction and becomes
inflamed. Inflammation of the bursa is known as bursitis.
Nerve Injury
Nerves carry signals from the brain to control activities of muscles. They also carry information
about temperature, pain and touch from the body to the brain, and control bodily functions
such as sweating and salivation. Nerves are surrounded by muscles, tendons, and ligaments.
With repetitive motions and awkward postures, the tissues surrounding nerves become swollen,
and squeeze or compress nerves (Fig. 7A,7B).
Page 24
www.thailandhotelier.com
Figure 7A - Wrist in natural condition
Figure 7B - Wrist showing symptoms of Carpal
Tunnel Syndrome
Compression of a nerve causes muscle weakness, sensations of "pins and needles" and
numbness. Dryness of skin, and poor circulation to the extremities, may also occur.
Pain is the most common symptom associated with WMSDs. In some cases there may be joint
stiffness, muscle tightness, redness and swelling of the affected area. Some workers may also
experience sensations of "pins and needles," numbness, skin colour changes, and decreased
sweating of the hands.
Early stage: Aching and tiredness of the affected limb occur during the work shift but disappear
at night and during days off work. No reduction of work performance.
Intermediate stage: Aching and tiredness occur early in the work shift and persist at night.
Reduced capacity for repetitive work.
Late stage: Aching, fatigue, and weakness persist at rest. Inability to sleep and to perform light
duties.
Not everyone goes through these stages in the same way. In fact, it may be difficult to say
exactly when one stage ends and the next begins. The first pain is a signal that the muscles and
tendons should rest and recover. Otherwise, an injury can become longstanding, and
sometimes, irreversible. The earlier people recognize symptoms, the quicker they should respond
to them.
Table 2 outlines occupational risk factors and symptoms of the most common disorders of the
upper body associated with WMSDs.
Page 25
www.thailandhotelier.com
Table 2
Identified disorders, occupational risk factors and symptoms
Epicondylitis (elbow tendonitis) Repeated or forceful rotation of the Same symptoms as tendonitis
forearm and bending of the wrist at the
same time
Carpal tunnel syndrome Repetitive wrist motions Pain, numbness, tingling, burning
sensations, wasting of muscles at base of
thumb, dry palm
DeQuervain's disease Repetitive hand twisting and forceful Pain at the base of thumb
gripping
Thoracic outlet syndrome Prolonged shoulder flexion Pain, numbness, swelling of the hands
Extending arms above shoulder height
Carrying loads on the shoulder
The evaluation of WMSDs includes identifying workplace risks. Evaluation begins with a discussion
of the person's employment and requires a detailed description of all the processes involved in a
typical workday. Consideration is given to the frequency, intensity, duration, and regularity of
each task performed at work.
Diagnosis of WMSDs is confirmed by performing laboratory and electronic tests that determine
nerve or muscle damage. One such test, electroneuromyography (ENMG), encompasses two
areas: electromyography (EMG) and nerve conduction velocity (NCV). Magnetic resonance
imaging (MRI), an alternative to x-rays, provides images of tendons, ligaments, and muscles and
improves the quality of the diagnostic information.
• Restriction of movement
• Application of heat or cold
• Exercise
• Medication and surgery
Restriction of Movement
The first approach to treatment of WMSDs is to avoid the activities causing the injury. This often
requires work restrictions. In some cases, transfer to a different job should be considered. A splint
can also be used to restrict movements or to immobilize the injured joint. However, the use of
splints in occupational situations requires extreme caution. If used inappropriately, splints can
cause more damage than good. Splints are usually used for two reasons: to mechanically
support a joint where an excessive load on the joint is anticipated, or to restrict the movement of
the injured joint.
Page 26
www.thailandhotelier.com
In the occupational context, splints should not be used as a mechanical support for the joint.
Instead, the job should be redesigned to avoid the extreme load on the worker's joint in the first
place. To be effective, the use of splints to immobilize an affected joint also requires that the
work activity that caused the injury be stopped or changed. If injurious work continues, then the
worker is exposed to risk of injury to other joints that have to compensate for the one that is
splinted.
Applying heat or cold seems to relieve pain and may accelerate the repair process. Heat is
recommended for pain relief of minor injuries. It is not recommended for injuries with significant
inflammation and swelling.
Heat increases the flow of blood and increases swelling. Ice reduces pain and swelling.
Exercise
Stretching is beneficial because it promotes circulation and reduces muscle tension. However,
people suffering from WMSDs should consult a physical therapist before exercising. Stretching or
exercise programs can aggravate the existing condition if not properly designed.
Anti-inflammatory drugs can reduce pain and inflammation. The doctor may try more elaborate
treatments or even surgery if all other approaches fail.
Hazards are best eliminated at the source; this is a fundamental principle of occupational health
and safety. In the case of WMSDs, the prime source of hazard is the repetitiveness of work. Other
components of work such as the applied force, fixed body positions, and the pace of work
requiring repetition of the same movements over and over again, are also contributing factors to
WMSDs. Therefore the main effort to protect workers from WMSDs should focus on avoiding
repetitive patterns of work through job design which may include mechanization, job rotation,
job enlargement and enrichment or teamwork. Where elimination of the repetitive patterns of
work is not practical, prevention strategies involving workplace layout, tool and equipment
design, and work practices should be considered.
Job Design
Mechanization
One way to eliminate repetitive tasks is to mechanize the job. Where mechanization is not
feasible or appropriate, other alternatives are available.
Job Rotation
Job rotation is one possible approach. It requires workers to move between different tasks, at
fixed or irregular periods of time. But it must be a rotation where workers do something
completely different. Different tasks must engage different muscle groups in order to allow
recovery for those already strained.
Page 27
www.thailandhotelier.com
However, job rotation alone will not be effective in reducing WNSDs if not combined with the
proper design of workstations. And it will not be effective while the high pace of work persists.
Another approach is job enlargement. This increases the variety of tasks built into the job. It
breaks the monotony of the job and avoids overloading one part of the body. Job enrichment
involves more autonomy and control for the worker.
Team Work
Team work can provide greater variety and more evenly distributed muscular work. The whole
team is involved in the planning and allocation of the work. Each team member carries out a set
of operations to complete the whole product, allowing the worker to alternate between tasks,
hence, reducing the risk of WMSDs.
Workplace Design
The guiding principle in workplace design is to fit the workplace to the worker. Evaluation of the
workplace can identify the source or sources of WMSD. Proper design of the workstation
decreases the effort required of the worker to maintain a working position. Ideally, the
workstation should be fully adjustable, providing a worker with the options to work in standing,
sitting or sitting-standing positions, as well as fitting the worker's body size and shape. Detailed
information about proper workplace design can be found in the OSH Answers documents
"Working in a Standing Position" and "Working in a Sitting Position".
Proper design of tools and equipment significantly decreases the force needed to complete the
task.
Providing the worker with the proper jigs or fixtures for tasks that require holding elements saves a
lot of muscular effort in awkward positions.
Good tools, maintained carefully and where necessary frequently changed, can also save a lot
of muscle strain. More information about hand tools and preventing WMSD resulting from their
use can be found in the OSH Answers document "Hand Tool Ergonomics".
Work Practices
A well-designed job, supported by a well-designed workplace and proper tools, allows the
worker to avoid unnecessary motion of the neck, shoulders and upper limbs. However, the
actual performance of the tasks depends on individuals.
Training should be provided for workers who are involved in jobs that include repetitive tasks.
Workers need to know how to adjust workstations to fit the tasks and their individual needs.
Training should also emphasize the importance of rest periods and teach how to take
advantage of short periods of time between tasks to relax the muscles, and how to consciously
control muscle tension throughout the whole work shift.
Page 28
www.thailandhotelier.com
Conclusion
WMSDs of muscles, tendons and nerves are a major cause of lost work in many labour-intensive
industries. Occupational risk factors include continual repetition of movements, fixed body
positions, forces concentrated on small parts of the body, and lack of sufficient rest between
tasks.
Prevention must aim at eliminating the repetitiveness of the work by proper job design. Where
this is not possible, preventive strategies such as good workplace layout, tool and equipment
design, and proper work practices should be considered. Early recognition of these disorders is
very important because medical treatments are unlikely to be effective once these injuries
become longstanding.
Preventive and control measures, in order to be truly effective, require significant involvement on
the part of the workers, their representatives, and management to improve occupational health
and safety.
Repetitive movements are especially hazardous when they involve the same joints and muscle
groups over and over and when we do the same motion too often, too quickly and for too long.
To analyze how repetitive a task is, we need to describe it in terms of steps or cycles. For
example, the bottle packing operation (Figure 6) requires workers to pack boxes with twenty-four
bottles.
Page 29
www.thailandhotelier.com
If a worker grasps four bottles each time, the same cycle would have to be repeated six times to
fill a box. Assuming that one cycle lasts two seconds, it would take twelve seconds to pack a box
with twenty-four bottles.
There are no rules to judge movements as either high or low in repetition. Some researchers
classify a job as "high repetitive" if the time to complete such a job was less than 30 seconds or
"low repetitive" if the time to complete the job was more than 30 seconds. Although no one
really knows at what point WMSDs may develop, workers performing repetitive tasks are at risk for
WMSDs Work involving movement repeated over and over is very tiring because the worker can
not fully recover in the short periods of time between movements. Eventually, it takes more effort
to perform the same repetitive movements. When the work activity continues in spite of the
fatigue, injuries can occur.
Force is the amount of effort our bodies must do to lift objects, to use tools, or to move.
The amount of force we use to do a job depends on many factors such as the weight of the
objects and their placement in relation to the body. It requires more force to lift and carry a box
with arms outstretched and held away from the body (Figure 7) or to lift the same objects in a
"pinch" position (Figure 7a) than in a "hook" position (Figure 8, 8a).
A force of more than four kilograms, or nine pounds, is considered significant. This is the force
used to hammer a nail, for example. Although no one really knows when WMSDs will develop,
workers performing forceful movements are at risk. Work involving forceful movements is very
tiring again because there is not time for a full recovery between movements. Eventually it takes
effort to perform the same task. When the work activity continues in spite of the developing
fatigue, injuries occur.
Page 30
www.thailandhotelier.com
Appendix 2
DO WEAR
DO NOT WEAR
• aprons, coats,
• clothing with exposed buttons, zippers or loose flaps, or
• heavy duty mitts.
• Always check before lifting to see if mechanical aids such as hoists, lift trucks dollies or
wheelbarrows are available.
• Get help with heavy or awkward loads.
• Assess the weight of the load.
• Identify the weight of the load.
• Be sure that you can lift the load without over-exertion.
• Be sure that the load is "free" to move.
• Check that the planned location of the load is free of obstacles and debris.
• Be sure that the path to the planned location of the load is clear. Grease, oil, water, litter
and debris can cause slips and falls.
• Particular handling and lifting techniques are needed for different kinds of loads or
materials being handled (for example, compact loads, small bags, large sacks, drums,
barrels, cylinders, sheet materials like metal or glass).
• Do not lift if you are not sure that you can handle the load safely.
Page 31
www.thailandhotelier.com
Appendix 3
Microwave ovens are used daily in restaurants, cafeterias, lounges, kitchens, snack bars, and
homes. Microwave oven users are often concerned about potential health hazards from the
exposure to microwave radiation leakage. With the latest technological advances in door seal
design and with proper maintenance, microwave oven leakage has been greatly minimized or
eliminated.
The microwave energy from the magnetron is transferred to the oven cavity through a
waveguide section. A mode stirrer spreads the microwave energy more or less evenly
throughout the oven.
The microwave radiation produces heat inside the food in the oven. Heat is produced when the
water molecules in the food vibrate (at a rate of 2,450,000,000 times per second) when the food
absorbs the microwave radiation. The movement of the molecules produce friction which
causes heat. This heat cooks or warms up the food.
Old or faulty door seals are the most common causes of microwave radiation leakage.
Mechanical abuse, a build-up of dirt, or simple wear and tear of continued use can cause door
seals to be less effective. Theoretically, there will be small amounts of leakage through the
viewing glass but measurements have shown this to be insignificant.
Page 32
www.thailandhotelier.com
What are the health effects of microwave radiation?
A large amount of literature has been published on the biological effects of microwave
radiation. Generally speaking, exposure to very high levels of microwave radiation can result in
significant amounts of energy being absorbed by the body. Just as with food, this energy is
transformed into heat in the body. Sensitive body parts, such as the eyes, testes and brain, are
not able to get rid of the extra heat that may build up. However, the situations where effects of
thermal (heat) damage has actually occurred to the eye or brain required long term exposure
to very high power densities well in excess of those measured around microwave ovens.
Some biological effects cannot be explained by a temperature rise in the body or in any one
part. Persons working in microwave fields have reported headaches, eyestrain, over-all fatigue
and disturbance of sleep. These effects have been associated with the interaction of the
microwave fields with the central nervous system of the body. Such effects have been labeled
as "non-thermal" interactions. These may be responsible for some of the long-term effects from
prolonged exposure to low levels of electromagnetic fields. There is no confirmed scientific
evidence to prove a link between such effects and microwave radiatus exposure. However, it
must be emphasized that these effects usually occur with pulsed or pulse-modulated fields and
not with the continuous wave fields associated with microwave ovens.
• Take special care to ensure that no damage occurs to the part of the oven making
contact with the door or door seals.
• Ensure that the microwave is unplugged or disconnected from electrical power before
reaching into any accessible openings or attempting any repairs.
• Ensure that the adjustment of applied voltages, replacement of the microwave power
generating component, dismantling of the oven components, and refitting of
waveguides are undertaken only by persons who have been specially trained for such
tasks. The services of a qualified repairman should be sought when any malfunction is
suspected.
• Do not by pass the door interlocks.
• Do not test a microwave power generating component without an appropriate load
connected to its output. The power generated must never be allowed to radiate freely
into occupied areas.
Page 33
www.thailandhotelier.com
Appendix 4
The short answer is yes. Both very cold and very hot temperatures could be dangerous to your
health.
Excessive exposure to heat is referred to as heat stress and excessive exposure to cold is referred
to as cold stress.
In a very hot environment, the most serious concern is heat stroke. In absence of immediate
medical attention, heat stroke could be fatal. Heat stroke fatalities do occur every summer. Heat
exhaustion, and fainting (syncope) are less serious types illnesses which are not fatal but interfere
with a person's ability to work.
At very cold temperatures, the most serious concern is the risk of hypothermia or dangerous
overcooling of the body. Another serious effect of cold exposure is frostbite or freezing of the
exposed extremities such as fingers, toes, nose and ear lobes. Hypothermia could be fatal in
absence of immediate medical attention.
The victims of heat stroke and hypothermia are unable to notice the symptoms, and therefore,
their survival depends on co-workers' ability to identify symptoms and to seek medical help.
While symptoms can vary from person to person, the warning signs of heat stroke can include
complaints of sudden and severe fatigue, nausea, dizziness, lightheadedness, and profuse and
prolonged sweating. If a co-worker appears to be disorientated or confused (including
euphoria), or has unaccountable irritability, malaise or flu-like symptoms, the worker should be
moved to a cool location and seek medical advice.
Warning signs of hypothermia can include complaints of nausea, fatigue, dizziness, irritability or
euphoria. Workers can also experience pain in their extremities (hands, feet, ears, etc), and
severe shivering. Workers should be moved to a heated shelter and seek medical advice when
appropriate.
is the removal of water from an object. Medically, dehydration is a serious and potentially life-
threatening condition in which the body contains an insufficient volume of water for normal
functioning.
In humans, dehydration can be caused by a wide range of diseases and states that impair
water homeostasis in the body. These include:
Page 34
www.thailandhotelier.com
o Diarrhea
o Shock
o Vomiting
• Infectious diseases
o Cholera
o Gastroenteritis
o Shigellosis
o Yellow fever
• Malnutrition
o Excessive consumption of alcohol
o Fasting
o Recent rapid weight loss may reflect progressive depletion of fluid volume.
o Patient refusal of nutrition and hydration
Symptoms may include headaches similar to what is experienced during a hangover, a sudden
episode of visual snow, decreased blood pressure (hypotension), and dizziness or fainting when
standing up due to orthostatic hypotension. Untreated dehydration generally results in delirium,
unconsciousness, and in extreme cases death.
Dehydration symptoms generally become noticeable after 2% of one's normal water volume has
been lost. Initially, one experiences thirst and discomfort, possibly along with loss of appetite and
dry skin. Athletes may suffer a loss of performance of up to 50%, and experience flushing, low
endurance, rapid heart rates, elevated body temperatures, and rapid onset of fatigue.
Symptoms of mild dehydration include thirst, decreased urine volume, urine that is darker than
usual, unexplained tiredness, lack of tears when crying, headache, dry mouth, and dizziness
when standing due to orthostatic hypotension.
In moderate to severe dehydration, there may be no urine output at all. Other symptoms in
these states include lethargy or extreme sleepiness, seizures, sunken fontanel (soft spot) in infants,
fainting, and sunken eyes.
The symptoms become increasingly severe with greater water loss. One's heart and respiration
rates begin to increase to compensate for decreased plasma volume and blood pressure, while
body temperature may rise because of decreased sweating. Around 5% to 6% water loss, one
may become groggy or sleepy, experience headaches or nausea, and may feel tingling in one's
limbs (paresthesia). With 10% to 15% fluid loss, muscles may become spastic, skin may shrivel and
wrinkle, vision may dim, urination will be greatly reduced and may become painful, and delirium
may begin. Losses greater than 15% are usually fatal.
The best treatment for minor dehydration is drinking water and stopping fluid loss. Water is
preferable to sport drinks and other commercially-sold rehydration fluids, as the balance of
electrolytes they provide may not match the replacement requirements of the individual. To stop
fluid loss from vomiting and diarrhea, avoid solid foods and drink only clear liquids.
Dehydration is best avoided by drinking plenty of water. The greater the amount of water lost
through perspiration, the more water must be consumed to replace it and avoid dehydration.
Since the body cannot tolerate large deficits or excesses in total body water, consumption of
water must be roughly concurrent with the loss (in other words, if one is perspiring, one should
also be drinking water frequently). Drinking water slightly beyond the needs of the body entails
no risk, since the kidneys will efficiently remove any excess water through the urine with a large
Page 35
www.thailandhotelier.com
margin of safety. A person's body, during an average day in a temperate climate such as the
United Kingdom, loses approximately 2.5 liters of water. This can be through the lungs as water
vapor, through the skin as sweat, or through the kidneys as urine. Some water (a less significant
amount, in the absence of diarrhea) is also lost through the bowels. In warm or humid weather or
during heavy exertion, however, the water loss can increase by an order of magnitude or more
through perspiration—all of which must be promptly replaced. In extreme cases, the losses may
be great enough to exceed the body's ability to absorb water from the gastrointestinal tract; in
these cases, it is not possible to drink enough water to stay hydrated, and the only way to avoid
dehydration is to reduce perspiration (through rest, a move to a cooler environment, etc.). A
useful rule of thumb for avoiding dehydration in hot or humid environments or during strenuous
activity involves monitoring the frequency and character of urination. If one develops a full
bladder at least every 3-5 hours and the urine is only lightly colored or colorless, chances are that
dehydration is not occurring; if urine is deeply colored, or urination occurs only after many hours
or not at all, water intake may not be adequate to maintain proper hydration.
When large amounts of water are being lost through perspiration and concurrently replaced by
drinking, maintaining proper electrolyte balance becomes an issue. Drinking fluids that are
hypertonic or hypotonic with respect to perspiration may have grave consequences
(hyponatremia or hypernatremia, principally) as the total volume of water turnover increases.
If water is being lost through an abnormal mechanisms such as vomiting or diarrhea, that carry
away electrolytes in large quantities, an imbalance can develop very quickly into a medical
emergency. In fact, the main mechanisms through which diseases such as infantile diarrhea and
cholera kill their victims are dehydration and loss of electrolytes.
Page 36
www.thailandhotelier.com
Appendix 5
In Canada some sixty thousand workers get injured annually due to fall accidents. This number
represents about fifteen percent of the "time-loss injuries" that were accepted by workers'
compensation boards or commissions across Canada. Not mentioning a great economical loss,
it amounts for a lot of pain and suffering and sometimes (much too often) even death. All these,
in most of cases, do not have to happen. What is needed is:
Statistics show that the majority (60 percent) of falls happen on the same level resulting from slips
and trips. The remaining 40 percent are falls from a height. This document will summarize
information on "falls on the same level" (slips and trips). Falls from an elevation, such as falls from
ladders, roofs, down stairs or from jumping to a lower level, etc., will discussed in another
document since each type of fall requires different features in a fall prevention program.
Slips
Slips happen where there is too little friction or traction between the footwear and the walking
surface. Common causes of slips are:
Trips
Trips happen when your foot collides (strikes, hits) an object causing you to lose the balance
and, eventually fall. Common causes of tripping are:
• obstructed view,
• poor lighting,
• clutter in your way,
• wrinkled carpeting,
• uncovered cables,
• bottom drawers not being closed, and
• uneven (steps, thresholds) walking surfaces.
Page 37
www.thailandhotelier.com
How to prevent falls due to slips and trips?
Both slips and trips result from some a kind of unintended or unexpected change in the contact
between the feet and the ground or walking surface. This shows that good housekeeping,
quality of walking surfaces (flooring), selection of proper footwear, and appropriate pace of
walking are critical for preventing fall accidents.
Housekeeping
Good housekeeping is the first and the most important (fundamental) level of preventing falls
due to slips and trips. It includes:
Without good housekeeping practices, any other preventive measures such as installation of
sophisticated flooring, specialty footwear or training on techniques of walking and safe falling will
never be fully effective.
Flooring
Changing or modifying walking surfaces is the next level of preventing slip and trips. Recoating or
replacing floors, installing mats, pressure-sensitive abrasive strips or abrasive-filled paint-on
coating and metal or synthetic decking can further improve safety and reduce risk of falling.
However, it is critical to remember that high-tech flooring requires good housekeeping as much
as any other flooring. In addition, resilient, non-slippery flooring prevents or reduces foot fatigue
and contributes to slip prevention measures.
Footwear
In workplaces where floors may be oily or wet or where workers spend considerable time
outdoors, prevention of fall accidents should focus on selecting proper footwear. Since there is
no footwear with anti-slip properties for every condition, consultation with manufacturers' is highly
recommended.
Properly fitting footwear increases comfort and prevents fatigue which, in turn, improves safety
for the employee. For more information on footwear visit our web-page Foot safety.
Page 38
www.thailandhotelier.com
You can reduce the risk of slipping on wet flooring by:
• taking your time and paying attention to where you are going,
• adjusting your stride to a pace that is suitable for the walking surface and the tasks you
are doing,
• walking with the feet pointed slightly outward, and
• making wide turns at corners.
• always using installed light sources that provide sufficient light for your tasks or,
• using a flashlight if you enter a dark room where there is no light, and
• ensuring that things you are carrying or pushing do not prevent you from seeing any
obstructions, spills, etc.
Page 39
www.thailandhotelier.com
Appendix 6
Stress
We hear a lot about stress, but what is it? Taber's Cyclopedic Medical Dictionary defines stress as
"the result produced when a structure, system or organism is acted upon by forces that disrupt
equilibrium or produce strain". In simpler terms, stress is the result of any emotional, physical,
social, economic, or other factors that require a response or change. It is generally believed that
some stress is okay (sometimes referred to as "challenge"or "positive stress") but when stress
occurs in amounts that you cannot handle, both mental and physical changes may occur.
"Workplace stress" then is the harmful physical and emotional responses that can happen when
there is a conflict between job demands on the employee and the amount of control an
employee has over meeting these demands. In general, the combination of high demands in a
job and a low amount of control over the situation can lead to stress.
Stress in the workplace can have many origins or come from one single event. It can impact on
both employees and employers alike. As stated by the Canadian Mental Health Association:
Fear of job redundancy, layoffs due to an uncertain economy, increased demands for overtime
due to staff cutbacks act as negative stressors. Employees who start to feel the "pressure to
perform" can get caught in a downward spiral of increasing effort to meet rising expectations
with no increase in job satisfaction. The relentless requirement to work at optimum performance
takes its toll in job dissatisfaction, employee turnover, reduced efficiency, illness and even death.
Absenteeism, illness, alcoholism, "petty internal politics", bad or snap decisions, indifference and
apathy, lack of motivation or creativity are all by-products of an over stressed workplace.
I have heard stress can be both good and bad. Is this true?
Some stress is normal. In fact, it is often what provides us with the energy and motivation to meet
our daily challenges both at home and at the workplace. Stress in these situations is the kind that
helps you "rise" to a challenge and meet your goals such as deadlines, sales or production
targets, or finding new clients. Some people would not consider this challenge a type of stress
because, having met the challenge, we are satisfied and happy. However, as with most things,
too much stress can have negative impacts. When the feeling of satisfaction turns into
exhaustion, frustration or dissatisfaction, or when the challenges at work become too
demanding, we begin to see negative signs of stress.
Page 40
www.thailandhotelier.com
In the workplace, stress can be the result of any number of situations. Some examples include:
(Adapted from: Murphy, L. R., Occupational Stress Management: Current Status and Future
Direction. in Trends in Organizational Behavior, 1995, Vol. 2., p. 1-14)
Yes, stress can have an impact on your overall health. Our bodies are designed, pre-
programmed if you wish, with a set of automatic responses to deal with stress. This system is very
effective for the short term "fight or flight" responses we need when faced with an immediate
danger. The problem is that our bodies deal with all types of stress in the same way. Experiencing
stress for long periods of time (such as lower level but constant stressors at work) will activate this
system, but it doesn't get the chance to "turn off". The body's "pre-programmed" response to
stress has been called the "Generalized Stress Response" and includes:
Page 41
www.thailandhotelier.com
• increased production of blood sugar for energy
• increased stomach acids
(From the Basic Certification Training Program: Participant's Manual, Copyright© 1999 by the
Workplace Safety and Insurance Board of Ontario).
Luckily, there are usually a number of warning signs that help indicate when you are having
trouble coping with stress before any severe signs become apparent. These signs are listed
below.
How do I know if someone is (or if I am) having trouble coping with stress?
There are many different signs and symptoms that can indicate when someone is having
difficulty coping with the amount of stress they are experiencing:
Physical: headaches, grinding teeth, clenched jaws, chest pain, shortness of breath, pounding
heart, high blood pressure, muscle aches, indigestion, constipation or diarrhea, increased
perspiration, fatigue, insomnia, frequent illness
Do all of these signs or symptoms happen all at once and what level of help should be sought?
No, not normally. The signs and symptoms from stress tend to progress through several phases or
stages. The phases can be described as below:
Phase 3 - Entrenched Cumulative • increased use of alcohol, smoking, The help of medical and
Stress psychological professionals is
Page 42
www.thailandhotelier.com
non-prescription drugs highly recommended.
This phase occurs when the above • depression
phases continue to be ignored. • physical and emotional fatigue
Stress starts to create a deeper • loss of sex drive
impact on career, family life and
personal well-being.
• ulcers
• marital discord
• crying spells
• intense anxiety
• rigid thinking
• withdrawal
• restlessness
• sleeplessness
(From: Anschuetz, B.L. "The High Cost of Caring: Coping with Workplace Stress" in Sharing:
Epilepsy Ontario. Posted 29 November 1999)
What are some general tips for dealing with stress at the workplace?
Since the causes of workplace stress vary greatly, so do the strategies to reduce or prevent it.
Where stress in the workplace is caused, for example, by a physical agent, it is best to control it
at its source. If the workplace is too loud, control measures to deal with the noise should be
implemented where ever possible. If you are experiencing pain from repetitive strain,
workstations can be re-designed to reduce repetitive and strenuous movements. More detailed
information and suggestions are located in the many other documents in OSH Answers (such as
noise, ergonomics, or violence in the workplace, etc.) or by asking the Inquiries Service.
Job design is also an important factor. Good job design accommodates an employee's mental
and physical abilities. In general, the following job design guidelines will help minimize or control
workplace stress:
• the job should be reasonably demanding (but not based on "sheer endurance") and
provide the employee with at least a minimum of variety in job tasks
Page 43
www.thailandhotelier.com
• the employee should be able to learn on the job and be allowed to continue to learn as
their career progresses
• the job should comprise some area of decision-making that the individual can call his or
her own.
• there should be some degree of social support and recognition in the workplace
• the employee should feel that the job leads to some sort of desirable future
Is there anything I can do to help myself deal with the stress I am experiencing?
In many cases, the origin of the stress is something that cannot be changed immediately.
Therefore, finding ways to help maintain good mental health is essential. There are many ways to
be proactive in dealing with stress. In the workplace, you might try some of the following as
suggested by the Canadian Mental Health Association:
Laughing is one of the easiest and best ways to reduce stress. Share a joke with a co-worker,
watch a funny movie at home with some friends, read the comics, and try to see the humour in
the situation.
Learn to relax, take several deep breaths throughout the day, or have regular stretch breaks.
Stretching is simple enough to do anywhere and only takes a few seconds.
Take charge of your situation by taking 10 minutes at the beginning of each day to priorize and
organize your day. Be honest with your colleagues, but be constructive and make practical
suggestions. Be realistic about what you can change. (From: Canadian Mental Health
Association, "Sources of Workplace Stress" Richmond, British Columbia)
1. build confidence identify your abilities and weaknesses together, accept them build on them and do the
best with what you have
2. eat right, keep fit a balanced diet, exercise and rest can help you to reduce stress and enjoy life.
3. make time for family and these relationships need to be nurtured; if taken for granted they will not be there to
friends share life's joys and sorrows.
4. give and accept support friends and family relationships thrive when they are "put to the test"
5. create a meaningful financial problems cause stress. Over-spending on our "wants" instead of our "needs"
budget is often the culprit.
6. volunteer being involved in community gives a sense of purpose and satisfaction that paid work
cannot.
7. manage stress we all have stressors in our lives but learning how to deal with them when they
threaten to overwhelm us will maintain our mental health.
8. find strength in numbers sharing a problem with others have had similar experiences may help you find a
solution and will make you feel less isolated.
9. identify and deal with we all need to find safe and constructive ways to express our feelings of anger,
moods sadness, joy and fear.
10. learn to be at peace with get to know who you are, what makes you really happy, and learn to balance what you
yourself can and cannot change about yourself.
(From: Canadian Mental Health Association - National Office. Home Page located at:
http://www.cmha.ca/ )
Page 44
www.thailandhotelier.com
Appendix 7
Working Alone
A person is alone at work when they are on their own; when they cannot be seen or heard by
another person; and when they cannot expect a visit from another worker.
It is important to consider all situations carefully. Working alone includes all employees who may
go for a period of time where they do not have direct contact with a co-worker. For example,
the receptionist in a large office building may be considered a "lone" worker. Alternatively, a
construction worker who is doing work in a bathroom or other location that cannot be seen by
co-workers may also be considered a lone worker. Other examples are gas station attendants,
convenience store clerks, food outlet employees, taxi drivers, home care employees, social
service workers, security guards or custodians.
While it is not always hazardous to work alone, it can be when other circumstances are present.
Whether a situation is a high or low risk will depend on the location, type of work, interaction with
the public, or the consequences of an emergency, accident, injury, etc. This wide variety of
circumstances makes it important to assess each situation individually.
High risk activities can involve risks from a variety of sources such as those below:
• at heights,
• in confined spaces (such as tanks, grain bins or elevators, culverts, etc.),
• with electricity,
• with hazardous substances or materials,
• with hazardous equipment such as chainsaws or firearms,
• with materials at great pressure, or,
• with the public, where there is a potential for violence.
Check the regulations in your area. Some jurisdictions have specific laws concerning working
alone.
There are many steps that can be taken to help ensure the safety of the lone worker:
Page 45
www.thailandhotelier.com
• Report all situations, incidents or 'near misses' where being alone increased the severity of
the situation. Analyze this information and make changes to company policy where
necessary.
• Establish a check-in procedure. Make sure that regular contact is kept with all
employees. Establish ways to account for people (visually or verbally) while they are
working.
• Schedule higher risk tasks to be done during normal business hours, or when another
worker capable of helping in an emergency is present.
For most lone workers, the telephone will be the main source of contact. If you work at a desk or
station, have a telephone close by. If you are away from a main office or work station, the use of
a cell phone is very helpful. If a cell phone is unreliable in your area, be sure to have alternative
methods of communication available (such as use of public telephones, site visits or satellite
technology).
When travelling out of the office, the main contact person should know the following details:
• destination,
• estimated time of arrival,
• return time or date,
• contact information,
• mode of travel (public transit, car, plane, etc.) and,
• alternate plans in the event of bad weather, traffic problems, etc.
• Prepare a daily work plan so it is known where the lone employee will be and when.
• Identify one main person to be the contact at the office, plus a back up.
• Define under what circumstances the lone employee will check in and how often.
• Stick to the visual check or call-in schedule. You may wish to have a written log of
contact.
• Have the contact person call or visit the lone employee periodically to make sure he or
she is okay.
• Pick out a code word to be used to identify or confirm that help is needed.
• Develop an emergency action plan to be followed if the lone employee does not
check-in when he or she is supposed to.
What are some factors to consider when assessing the workplace or situations?
The following are some points to consider. Each circumstance will be different, so be sure to
adapt the questions to suit your situation.
Page 46
www.thailandhotelier.com
• Is it legal for the person to be alone while doing certain activities? (For example: some
jurisdictions may restrict working alone in a confined space, or during lock-out / tag-out
operations).
• What time of the day will the person be alone?
Communication:
• Is the work in a remote or isolated location? (Remember that a remote location does not
have to be far away. Storage rooms that are rarely used can be considered remote or
isolated.)
• Is transportation necessary to get there? What kind of transportation is needed?
• Is the vehicle equipped with emergency supplies such as food and drinking water, as well
as a first aid kit?
• Will the person need to carry some or all of the emergency supplies with them when they
leave the vehicle?
• Does the person need training to be able to use the first aid equipment?
• What are the consequences if the vehicle breaks down?
• Will the person have to leave the vehicle for long periods of time?
• Is there adequate training and education provided for the person to be able to work
alone safely?
• Is there adequate personal protective equipment available? Is it in good working order?
• What machinery, tools or equipment will be used?
• Is there a high risk activity involved?
• Is fatigue likely to be a factor?
• Are there extremes of temperature?
• Is there risk of an animal attack, insect bite (poisonous, or allergic reaction), etc.?
• If the person is working inside a locked building, how will emergency services be able to
get in? (For example: a night cleaner in a secure office building)
• Does the work involve working with money or other valuables?
• Does the work involve seizing property or goods (such as repossession, recovering stolen
property, etc)?
• Are there any pre-existing medical conditions that may increase the risk?
• Does the person have adequate levels of experience and training? (For example: first
aid, communication systems repair, vehicle breakdowns, relevant administrative
procedures, and/or outdoor survival?)
(questions adapted from: WorkSafe Western Australia Commission, 1999. "Working Alone:
Guidance Note")
Page 47
www.thailandhotelier.com
Appendix 8
Washing hands
Simply put, yes. Hand washing is the single most effective way to prevent the spread of
infections. You can spread certain "germs" (a general term for microbes like viruses and
bacteria) casually by touching another person. You can also catch germs when you touch
contaminated objects or surfaces and then you touch your face (mouth, eyes, and nose).
"Good" hand washing techniques include using an adequate amount of soap, rubbing the
hands together to create friction, and rinsing under running water. The use of gloves is not a
substitute for hand washing.
Please note: In some workplaces, universal precautions should be followed when workers
are exposed to blood and certain other body fluids. Please see the OSH Answers document
Universal Precautions for more complete information.
Ensuring that employees wash their hands properly after using the washroom is very important in
reducing disease transmission of stomach "flus" (which really is not a "flu" or influenza) and other
gastrointestinal infections. Using soap and lathering up is very important (rinsing hands in water
only is not as effective). Use comfortably warm, running water. Hands should be washed for a
minimum of 10 seconds - longer if the hands are visibly soiled. To help people (especially
children) wash long enough, one option may be to sing a short song such as "Happy Birthday".
The idea of surgeons scrubbing for an operation (as on TV) is very similar.
Page 48
www.thailandhotelier.com
• dry your hands with a single use towel or air dryer,
• protect your hands from touching dirty surfaces as you leave the bathroom.
• Cover cuts with bandages and wear gloves for added protection (cuts are very
vulnerable to infections).
• Artificial nails and chipped nail polish have been associated with an increase in the
number of bacteria on the fingernails. Be sure to clean the nails properly.
• Keep your hands away from your eyes, nose or mouth.
• Assume that contact with any human body fluids is infectious.
• Liquid soap in disposable containers is best. If using reusable containers, they should be
washed and dried before refilling. If using a bar of soap, be sure to set it on a rack that
allows water to drain or use small bars that can be changed frequently.
When there is no soap or water available, one alternative is to use waterless hand scrubs. Some
of these products are made of ethyl alcohol mixed with emollients (skin softeners) and other
agents. They are often available as a rinse, or on wipes or towelettes. They can be used by
paramedics, home care attendants, or other mobile workers where hand washing facilities are
not available. However, these agents are not effective when the hands are heavily
contaminated with dirt, blood, or other organic materials. In addition, waterless hand scrubs may
have a drying effect on the skin and may have odours which may be irritating to some users.
Page 49
www.thailandhotelier.com
Appendix 9
Reporting hazards
You should report it immediately to your supervisor. You do not need to wait for an inspection
team to come by. In fact, health and safety legislation requires employees to report hazards to
their supervisor.
The immediate hazard reporting process allows employees to report hazardous conditions or
practices as they notice them. This procedure allows for prompt reporting and subsequent
corrective action without waiting for the next round of regular inspections.
Hazards can be reported verbally or by filling a simple form available at bulletin boards or other
conspicuous places. The following is an example of such a form.
Name: Date:
Location:
Equipment:
Signature:
Supervisor's remarks:
Page 50
www.thailandhotelier.com
Appendix 10
Workplace housekeeping
Effective housekeeping can eliminate some workplace hazards and help get a job done safely
and properly. Poor housekeeping can frequently contribute to accidents by hiding hazards that
cause injuries. If the sight of paper, debris, clutter and spills is accepted as normal, then other
more serious health and safety hazards may be taken for granted.
Housekeeping is not just cleanliness. It includes keeping work areas neat and orderly; maintaining
halls and floors free of slip and trip hazards; and removing of waste materials (e.g., paper,
cardboard) and other fire hazards from work areas. It also requires paying attention to important
details such as the layout of the whole workplace, aisle marking, the adequacy of storage
facilities, and maintenance. Good housekeeping is also a basic part of accident and fire
prevention.
To avoid these hazards, a workplace must "maintain" order throughout a workday. Although this
effort requires a great deal of management and planning, the benefits are many.
Page 51
www.thailandhotelier.com
How do I plan a good housekeeping program?
A good housekeeping program plans and manages the orderly storage and movement of
materials from point of entry to exit. It includes a material flow plan to ensure minimal handling.
The plan also ensures that work areas are not used as storage areas by having workers move
materials to and from work areas as needed. Part of the plan could include investing in extra
bins and more frequent disposal.
Worker training is an essential part of any good housekeeping program. Workers need to know
how to work safely with the products they use. They also need to know how to protect other
workers such as by posting signs (e.g., "Wet - Slippery Floor") and reporting any unusual
conditions.
Housekeeping order is "maintained" not "achieved." This means removing the inevitable messes
that occur from time to time and not waiting until the end of the shift to reorganize and clean
up. Integrating housekeeping into jobs can help ensure this is done. A good housekeeping
program identifies and assigns responsibilities for the following:
Do not forget out-of-the-way places such as shelves, basements, sheds, and boiler rooms that
would otherwise be overlooked. The orderly arrangement of operations, tools, equipment and
supplies is an important part of a good housekeeping program.
The final addition to any housekeeping program is inspection. It is the only way to check for
deficiencies in the program so that changes can be made. The documents on workplace
inspection checklists provide a general guide and examples of checklists for inspecting offices
and manufacturing facilities.
In some jobs, enclosures and exhaust ventilation systems may fail to collect dust, dirt and chips
adequately. Vacuum cleaners are suitable for removing light dust and dirt. Industrial models
have special fittings for cleaning walls, ceilings, ledges, machinery, and other hard-to-reach
places where dust and dirt may accumulate.
Dampening floors or using sweeping compounds before sweeping reduces the amount of
airborne dust. The dust and grime that collect in places like shelves, piping, conduits, light fixtures,
reflectors, windows, cupboards and lockers may require manual cleaning. Special-purpose
vacuums are useful for removing hazardous substances. For example, vacuum cleaners fitted
with HEPA (high efficiency particulate air) filters may be used to capture fine particles of asbestos
or fibreglass.
Compressed air should not be used for removing dust, dirt or chips from equipment or work
surfaces.
Page 52
www.thailandhotelier.com
Employee Facilities
Employee facilities need to be adequate, clean and well maintained. Lockers are necessary for
storing employees' personal belongings. Washroom facilities require cleaning once or more each
shift. They also need to have a good supply of soap, towels plus disinfectants, if needed.
If workers are using hazardous materials, employee facilities should provide special precautions
such as showers, washing facilities and change rooms. Some facilities may require two locker
rooms with showers between. Using such double locker rooms allows workers to shower off
workplace contaminants and prevents them from contaminating their "street clothes" by
keeping their work clothes separated from the clothing that they wear home.
Smoking, eating or drinking in the work area should be prohibited where toxic materials are
handled. The eating area should be separate from the work area and should be cleaned
properly each shift.
Surfaces
Floors: Poor floor conditions are a leading cause of accidents so cleaning up spilled oil and other
liquids at once is important. Allowing chips, shavings and dust to accumulate can also cause
accidents. Trapping chips, shavings and dust before they reach the floor or cleaning them up
regularly can prevent their accumulation. Areas that cannot be cleaned continuously, such as
entrance ways, should have anti-slip flooring. Keeping floors in good order also means replacing
any worn, ripped, or damaged flooring that poses a tripping hazard.
Walls: Light-coloured walls reflect light while dirty or dark-coloured walls absorb light. Contrasting
colours warn of physical hazards and mark obstructions such as pillars. Paint can highlight railings,
guards and other safety equipment, but should never be used as a substitute for guarding. The
program should outline the regulations and standards for colours.
Dirty light fixtures reduce essential light levels. Clean light fixtures can improve lighting efficiency
significantly.
Aisles should be wide enough to accommodate people and vehicles comfortably and safely.
Aisle space allows for the movement of people, products and materials. Warning signs and
mirrors can improve sight-lines in blind corners. Arranging aisles properly encourages people to
use them so that they do not take shortcuts through hazardous areas.
Keeping aisles and stairways clear is important. They should not be used for temporary "overflow"
or "bottleneck" storage. Stairways and aisles also require adequate lighting.
Spill Control
The best way to control spills is to stop them before they happen. Regularly cleaning and
maintaining machines and equipment is one way. Another is to use drip pans and guards where
possible spills might occur. When spills do occur, it is important to clean them up immediately.
Absorbent materials are useful for wiping up greasy, oily or other liquid spills. Used absorbents
must be disposed of properly and safely.
Page 53
www.thailandhotelier.com
Tools and Equipment
Tool housekeeping is very important, whether in the tool room, on the rack, in the yard, or on the
bench. Tools require suitable fixtures with marked locations to provide orderly arrangement, both
in the tool room and near the work bench. Returning them promptly after use reduces the
chance of being misplaced or lost. Workers should regularly inspect, clean and repair all tools
and take any damaged or worn tools out of service.
Maintenance
The maintenance of buildings and equipment may be the most important element of good
housekeeping. Maintenance involves keeping buildings, equipment and machinery in safe,
efficient working order and in good repair. This includes maintaining sanitary facilities and
regularly painting and cleaning walls. Broken windows, damaged doors, defective plumbing
and broken floor surfaces can make a workplace look neglected; these conditions can cause
accidents and affect work practices. So it is important to replace or fix broken or damaged
items as quickly as possible. A good maintenance program provides for the inspection,
maintenance, upkeep and repair of tools, equipment, machines and processes.
Waste Disposal
The regular collection, grading and sorting of scrap contribute to good housekeeping practices.
It also makes it possible to separate materials that can be recycled from those going to waste
disposal facilities.
Allowing material to build up on the floor wastes time and energy since additional time is
required for cleaning it up. Placing scrap containers near where the waste is produced
encourages orderly waste disposal and makes collection easier. All waste receptacles should be
clearly labelled (e.g., recyclable glass, plastic, scrap metal, etc.).
Storage
Good organization of stored materials is essential for overcoming material storage problems
whether on a temporary or permanent basis. There will also be fewer strain injuries if the amount
of handling is reduced, especially if less manual materials handling is required. The location of
the stockpiles should not interfere with work but they should still be readily available when
required. Stored materials should allow at least one metre (or about three feet) of clear space
under sprinkler heads.
Stacking cartons and drums on a firm foundation and cross tying them, where necessary,
reduces the chance of their movement. Stored materials should not obstruct aisles, stairs, exits,
fire equipment, emergency eyewash fountains, emergency showers, or first aid stations. All
storage areas should be clearly marked.
Flammable, combustible, toxic and other hazardous materials should be stored in approved
containers in designated areas that are appropriate for the different hazards that they pose.
Storage of materials should meet all requirements specified in the fire codes and the regulations
of environmental and occupational health and safety agencies in your jurisdiction.
Page 54
www.thailandhotelier.com
Appendix 11
Noise hazards
Sound is what we hear. Noise is unwanted sound. The difference between sound and noise
depends upon the listener and the circumstances. Rock music can be pleasurable sound to one
person and an annoying noise to another. In either case, it can be hazardous to a person's
hearing if the sound is loud and if he or she is exposed long and often enough.
Sound is produced by vibrating objects and reaches the listener's ears as waves in the air or
other media. When an object vibrates, it causes slight changes in air pressure. These air pressure
changes travel as waves through the air and produce sound. To illustrate, imagine striking a
drum surface with a stick. The drum surface vibrates back and forth. As it moves forward, it
pushes the air in contact with the surface. This creates a positive (higher) pressure by
compressing the air. When the surface moves in the opposite direction, it creates a negative
(lower) pressure by decompressing the air. Thus, as the drum surface vibrates, it creates
alternating regions of higher and lower air pressure. These pressure variations travel through the
air as sound waves (Figure 1).
Figure 1
The hearing mechanism of the ear senses the sound waves and converts them into information
which it relays to the brain. The brain interprets the information as sound. Even very loud sounds
produce pressure fluctuations which are extremely small (1 in 10,000) compared to ambient air
pressure (i.e., atmospheric pressure). The hearing mechanism in the ear is sensitive enough to
detect even small pressure waves. It is also very delicate: this is why loud sound may damage
hearing.
Page 55
www.thailandhotelier.com
Why is noise an important workplace hazard?
Noise is one of the most common occupational health hazards. In heavy industrial and
manufacturing environments, as well as in farms, cafeterias, permanent hearing loss is the main
health concern. Annoyance, stress and interference with speech communication is the main
concern in noisy offices, schools and computer rooms.
To prevent adverse outcomes of noise exposure, noise levels should be reduced to acceptable
levels. The best method of noise reduction is to use engineering modifications to the noise source
itself, or to the workplace environment. Where technology cannot adequately control the
problem, personal hearing protection (such as ear muffs or plugs) can be used. Personal
protection, however, should be considered as an interim measure while other means of reducing
workplace noise are being explored and implemented.
As a first step in dealing with noise, workplaces need to identify areas or operations where
excessive exposure to noise occurs.
If you answer yes to any of the following questions, the workplace may have a noise problem.
Sound pressure converted to the decibel scale is called sound pressure level gives a detailed
explanation of decibels and sound pressure levels. Figure 2 compares sound pressures in pascals
and sound pressure levels in decibels (dB). The zero of the decibel scale (0 dB) is the sound
pressure of 0.00002 Pa. This means that 0.00002 Pa is the reference sound pressure to which all
other sound pressures are compared on the dB scale. This is the reason the decibels of sound are
often indicated as dB re 0.00002 Pa.
Page 56
www.thailandhotelier.com
What kinds of noise are there?
Noise can be continuous, variable, intermittent or impulsive depending on how it changes over
time. Continuous noise is noise which remains constant and stable over a given time period. The
noise of boilers in a power house is relatively constant and can therefore be classified as
continuous.
Page 57
www.thailandhotelier.com
Appendix 12
Electrical Safety
The electrical current in regular businesses and homes has enough power to cause death by
electrocution. Even changing a light bulb without unplugging the lamp can be hazardous
because coming in contact with the "hot" or live part of the socket could kill a person.
There are four main types of injuries: electrocution (fatal), electric shock, burns, and falls. These
injuries can happen in various ways:
What are some general safety tips for working with or near electricity?
• Inspect tools, power cords, and electrical fittings for damage or wear prior to each use.
Repair or replace damaged equipment immediately.
• Always tape cords to walls or floors when necessary. Nails and staples can damage cords
causing fire and shock hazards.
• Use cords or equipment that is rated for the level of amperage or wattage that you are
using.
• Always use the correct size fuse. Replacing a fuse with one of a larger size can cause
excessive currents in the wiring and possibly start a fire.
• Be aware that unusually warm or hot outlets may be a sign that unsafe wiring conditions
exists. Unplug any cords to these outlets and do not use until a qualified electrician has
checked the wiring.
• Always use ladders made of wood or other non-conductive materials when working with
or near electricity or power lines.
• Place halogen lights away from combustible materials such as cloths or curtains. Halogen
lamps can become very hot and may be a fire hazard.
• Risk of electric shock is greater in areas that are wet or damp. Install Ground Fault Circuit
Interrupters (GFCIs) as they will interrupt the electrical circuit before a current sufficient to
cause death or serious injury occurs.
• Make sure that exposed receptacle boxes are made of non-conductive materials.
• Know where the breakers and boxes are located in case of an emergency.
• Label all circuit breakers and fuse boxes clearly. Each switch should be positively
identified as to which outlet or appliance it is for.
• Do not use outlets or cords that have exposed wiring.
• Do not use power tools with the guards removed.
• Do not block access to circuit breakers or fuse boxes.
Page 58
www.thailandhotelier.com
• Do not touch a person or electrical apparatus in the event of an electrical accident.
Always disconnect the current first.
A Ground Fault Circuit Interrupter (GFCI) works by detecting any loss of electrical current in a
circuit. When a loss is detected, the GFCI turns the electricity off before severe injuries or
electrocution can occur. A painful shock may occur during the time that it takes for the GFCI to
cut off the electricity so it is important to use the GFCI as an extra protective measure rather than
a replacement for safe work practices.
GFCI wall outlets can be installed in place of standard outlets to protect against electrocution
for just that outlet, or a series of outlets in the same branch. A GFCI Circuit Breaker can be
installed on some circuit breaker electrical panels to protect an entire branch circuit. Plug-in
GFCIs can be plugged into wall outlets where appliances will be used.
Page 59
www.thailandhotelier.com
What is a sample checklist for basic electrical safety?
• Check power cords and plugs daily. Discard if worn or damaged. Have any cord that
feels more than comfortably warm checked by an electrician.
• Replace broken 3-prong plugs and make sure the third prong is properly grounded.
• Use extension cords only to temporarily supply power to an area that does not have a
power outlet.
• Keep power cords away from heat, water and oil. They can damage the insulation and
cause a shock.
• Do not allow vehicles to pass over unprotected power cords. Cords should be put in
conduit or protected by placing planks alongside them.
Page 60
www.thailandhotelier.com
Appendix 13
Confined Spaces
Many workers are injured and killed each year while working in confined spaces. An estimated
60% of the fatalities have been among the would-be rescuers. A confined space can be more
hazardous than regular workspaces for many reasons. To effectively control the risks associated
with working in a confined space, a Confined Space Hazard Assessment and Control Program
should be implemented for your workplace. Before putting together this program, make sure to
review the specific regulations that apply to your workplace.
If the confined space cannot be made safe for the worker by taking precautions then workers
should NOT enter the confined space until it is made safe to enter by additional means.
Confined spaces can be below or above ground. Confined spaces can be found in almost any
workplace. A confined space, despite its name, is not necessarily small. Examples of confined
spaces include silos, vats, hoppers, utility vaults, tanks, sewers, pipes, access shafts, truck or rail
tank cars, aircraft wings. Ditches and trenches may also be a confined space when access or
egress is limited.
Page 61
www.thailandhotelier.com
What are the hazards in a confined space?
All hazards found in a regular workspace can also be found in a confined space. However, they
can be even more hazardous in a confined space than in a regular worksite.
• Poor air quality: There may be an insufficient amount of oxygen for the worker to breathe.
The atmosphere might contain a poisonous substance that could make the worker ill or
even cause the worker to lose consciousness. Natural ventilation alone will often not be
sufficient to maintain breathable quality air.
• Chemical exposures due to skin contact or ingestion as well as inhalation of 'bad' air.
• Fire Hazard: There may be an explosive/flammable atmosphere due to flammable liquids
and gases and combustible dusts which if ignited would lead to fire or explosion.
• Process-related hazards such as residual chemicals, release of contents of a supply line.
• Noise.
• Safety hazards such as moving parts of equipment, structural hazards, entanglement,
slips, falls.
• Radiation.
• Temperature extremes including atmospheric and surface.
• Shifting or collapse of bulk material.
• Barrier failure resulting in a flood or release of free-flowing solid.
• Uncontrolled energy including electrical shock.
• Visibility.
• Biological hazards.
Page 62
www.thailandhotelier.com
Why is working in a confined space more hazardous than working in other workspaces?
Many factors need to be evaluated when looking for hazards in a confined space. There is
smaller margin for error. An error in identifying or evaluating potential hazards can have more
serious consequences. In some cases, the conditions in a confined space are always extremely
hazardous. In other cases, conditions are life threatening under an unusual combination of
circumstances. This variability and unpredictability is why the hazard assessment is extremely
important and must be taken very seriously each and every time one is done.
• The entrance/exit of the confined space might not allow the worker to get out in time
should there be a flood or collapse of free-flowing solid.
• Self-rescue by the worker is more difficult.
• Rescue of the victim is more difficult. The interior configuration of the confined space
often does not allow easy movement of people or equipment within it.
• Natural ventilation alone will often not be sufficient to maintain breathable quality air. The
interior configuration of the confined space does not allow easy movement of air within
it.
• Conditions can change very quickly.
• The space outside the confined space can impact on the conditions inside the confined
space and vice versa.
• Work activities may introduce hazards not present initially.
The important thing to remember is that each time a worker plans to enter any work space, the
worker should determine if that work space is considered a confined space. Be sure the
confined space hazard assessment and control program has been followed. The next question
to ask is - Is it absolutely necessary that the work be carried out inside the confined space? In
many cases where there have been deaths in confined spaces, the work could have been
done outside the confined space!
Page 63
www.thailandhotelier.com
Before to entering any confined space, a trained and experienced person should identify and
evaluate all the potential hazards within the confined space. An important step in determining
the hazards in a confined space is air testing.
Air quality testing: The air within the confined space should be tested from outside of the confined
space before entry into the confined space. Care should be taken to ensure that air is tested
throughout the confined space - side-to-side and top to bottom. A trained worker using
detection equipment which has remote probes and sampling lines should do the air quality
testing. The sampling should show that:
• The oxygen content is within safe limits - not too little and not too much.
• A hazardous atmosphere (toxic gases, flammable atmosphere) is not present.
• Ventilation equipment is operating properly.
The results of the tests for these hazards are to be recorded on the Entry Permit along with
the equipment or method(s) that were used in performing the tests. Air testing may need to
be ongoing depending on the nature of the potential hazards and the nature of the work.
Conditions can change while workers are inside the confined space and sometimes a
hazardous atmosphere is created by the work activities in the confined space
Many other situations or hazards may be present in a confined space. Be sure that all hazards
are controlled including:
• Any liquids or free-flowing solids are removed from the confined space to eliminate the
risk of drowning or suffocation.
• All pipes should be physically disconnected or isolation blanks bolted in place. Closing
valves is not sufficient.
• A barrier is present to prevent and liquids or free-flowing solids from entering the confined
space.
• The opening for entry into and exit from the confined space must be large enough to
allow the passage of a person using protective equipment.
Page 64
www.thailandhotelier.com