Beruflich Dokumente
Kultur Dokumente
Expertise
Performance
SERIE 2000
APORIS DEB02R
Applications
n
Valve systems Pump protection Pipeline protection Water supply Anti-surge solutions Backflow control
Water treatment Water extraction Seawater desalination Water transport Pressure management Pressure boosting Ventilation
MAMMOUTH
COBRA ELA
BOAVENT SVF/SVA
COBRA SMP
Valves
Butterfly valves
BOAX-B
Description
Centered disc butterfly valve with elastomer liner (EPDM XC or Nitrile K). With lever, manual gearbox, electric or pneumatic actuator. Wafer type body (T1), semi-lug type body (T2), full-lug type body (T4), or U-section body with flat faces (T5). Body types T2, T4 and T5 are suitable for downstream dismantling and dead-end service.
ISORIA
Centered disc butterfly valve with elastomer liner. With lever, manual gearbox, pneumatic, electric or hydraulic actuator. Wafer type body (T1), semi-lug type body (T2), full-lug type body (T4), or U-section body with flat faces (T5). Body types T2 and T4 are suitable for downstream dismantling and dead-end service with counterflange.
MAMMOUTH
Centered disc butterfly valve with elastomer liner. With manual gearbox electric, hydraulic actuator or counter weight. U-section / double flanged body with flat faces (T5).
BOAX-CBV13
Centered disc butterfly valve, epoxy-coated. Perfect shut-off in either flow direction. Flanged connections to EN standards. Vulcanized rubber lined. Face-to-face length to EN 558/13.
APORIS DEB02-DEB02R
Double-offset butterfly valve, epoxy-coated or completely rubber-coated. Perfect shut-off in either flow direction. Flanged connections to EN standards. Face-to-face length to EN 558/14.
ISO, ASME, JIS connections possible PN 10/16 DN 40- 1000 Body: Ductile iron. Valve disc: Nodular cast iron or stainless steel. Engineering contractors, for water, crude oil and oils. Shut-off and control duties in water management, water supply, water treatment, drainage and irrigation.
ISO, ASME, JIS connections possible PN 10/16/20/25 DN 40- 1000 Cast iron, ductile iron. Water supply, water treatment, irrigation, disposal, desalination (reverse osmosis, MSF), industry. Cooling circuits, fire fighting systems, shipbuilding, steel industry, power stations (water, thermal, nuclear). Shut-off and control duties in all industrial applications.
ISO, ASME, JIS connections possible PN 6/10/16/20/25 DN 1050-4000 Ductile iron. Water supply, water treatment, irrigation, disposal, desalination (reverse osmosis, MSF), industry. Cooling circuits, fire fighting systems, shipbuilding, steel industry, power stations (water, thermal, nuclear). Shut-off and control duties in all industrial applications.
ISO PN 10/16 DN 50- 1200 Body and disc made of ductile iron. Shut-off or control duties, drinking water, sea water, water supply, treatment, distribution, sewage, irrigation, high-purity water, air, oil.
ISO PN 10/16/25/40 DN 150-2200 Body and disc made of ductile iron. Shut-off or control duties, drinking water, sea water, air, water installations.
Gate valves
Diaphragm valves
Ball valves
DANAS 150
Double-offset butterfly valve with plastomer seat ring (also in fire-safe design) or metal seat ring. With lever or gearbox, pneumatic, electric or hydraulic actuator. Wafer type body (T1) or full-lug type body (T4). Body type T4 is suitable for dead-end service and downstream dismantling.
AQUARIS
Double offset disc butterfly valve, body and disc hard rubber coated, soft seal, dry shaft concept. Flanged connections to EN, AWWA or other standards. Face-to-face in accordance with EN 558/14.
COBRA-SMP
Metal-seated gate valve with bolted bonnet, inside screw, rotating stem. Flanged connections to EN standards. Face-toface length to EN 558/14.
COBRA-SGP / SGO
Rubber wedge gate valve with bolted bonnet, inside screw, rotating stem. Flanged connections to EN standards. Face-toface length to EN 558/14 and EN 558/15.
SISTO
Flanged end diaphragm valve. Shut-off and sealing to atmosphere by spiralsupported diaphragm. Body with or without lining. Position indicator with intgegrated stem protection. All moving parts are separated from the fluid by diaphragm. Maintenance-free. ISO PN 10/16 DN 15-300 Cast iron, stainless steel, nodular cast iron. In industrial and chemical plants, in process engineering. Suitable for drinking water, service water, air, oil as well as abrasive and aggressive fluids.
PSA KHG
Flanges (DIN/ASME), butt weld ends, socket weld or threaded ends, sealing: metal to metal or soft possible, soft secondary seal, double block and bleed, fully welded design, with lever or gearbox. Optional: Polyurethane coating, emergency seal, pneumatic or electric actuators, split body (bolted).
ISO, ASME, JIS connections PN max. 25 DN 50- 1200 Body made of cast stainless steel. Petroleum, gas, chemical and petrochemical industry, nuclear power stations, sugar industry, paper industry, geothermal energy, shipbuilding, low-pressure steam, vacuum service. All applications requiring offset disc butterfly valves.
ISO PN max. 40 DN 600-2500 Ductile iron, carbon steel. Other materials on request. Water transport.
ISO PN 16 DN 40-600 Body and wedge in ductile iron, stainless steel stem and seats. Water supply systems, heating systems, air-conditioning systems, general industry, clean water and building services.
ISO PN 16/25 DN 25 -600 Body made of ductile iron, rubber-coated wedge. Water supply systems, purification systems, air-conditioning systems.
ISO, ANSI connections possible PN 16/25/40/63/100/160/250 DN 15-1200 Carbon steel, stainless steel. Water treatment, water transport, general industry, petrochemical industry and all related industries, power stations, gas lines and gas plants, refineries, pipelines, gas storage facilities, tank farms.
Valves
SERIE 2000
Description
Twin plate check valve, one-piece body made of grey cast iron. Metal/elastomer or metal/metal seated. Maintenance-free.
COBRA-TDC
Tilting-disc check valve with lever and counterweight/hydraulic damper. Flanged connections to EN standards. Face-to-face length to EN 558/14.
COBRA-ELA / ELA-K
Swing check valve with rubber disc. Flanged connections to EN standards. Face-to-face length to EN 558/48 (COBRA-ELA) or EN 558/20 (COBRA-ELA-K). Bolted cover, drain plug; easy replacement of check disc.
BOA-RPL
Cast or ductile iron ball check valve, flanged or threaded F/F. Flanged connections to EN standards, threaded connections to ISO 7/1. Face-to-face length to EN 558/48. NBR coated ball. Bolted bonnet. Suitable for horizontal and vertical installation.
COBRA-SCBS
British Standard swing check valve, metal-seated. Flanged connections to EN standards. Face-to-face length to BS 5153.
ISO, ANSI, JIS connections PN 16/20/25/50 DN 50-600 One-piece body made of grey cast iron, ductile iron, carbon steel, stainless steel. Heating, air-conditioning, water supply, irrigation, water treatment, etc. Industry: water, air, gas, etc.
ISO PN 10/16/25/40 DN 100-2200 Body and disc made of ductile iron, body seats made of stainless steel. Water supply systems.
ISO PN 10/16 DN 40-300 Body made of cast iron, rubber-coated check disc. Water supply systems and waste water applications.
ISO PN 10/16 DN 25-300 Cast iron. Water supply systems, purification systems, waste water.
ISO PN 16 DN 50-300 Body and check disc made of ductile iron. Bolted cover, stainless steel/graphite. Water supply systems, treatment, distribution, sewage, irrigation, drinking water, sea water, air, gas, oil.
BOA-RFV
Non-slam, Venturi-type check valve. Flanged connections to EN standards. Max. flow velocity 2.5 m/s. Suitable for horizontal and vertical installation. Closure speed prevents water hammer.
HERA
Wafer-type knife gate valve made of grey cast iron, single or two-piece body, bi-directional, with gland packing, non-rising stem, corrosion protected by epoxy coating.
ISO PN 10/16/25/40/64 DN 40-600 Body made of cast iron, valve disc made of brass and cast iron. Stainless steel seat. Water supply systems, heating and conditioning plants.
ISO PN 16/40 DN 25-300 Body made of ductile iron single chamber with polypropylene float, double chamber with stainless steel float. Water distribution systems, clean or waste water, irrigation, raw sewage.
ISO PN 16/40/64 DN 25- 150 Body made of ductile iron, piston, stem and seat made of stainless steel. In aqueducts as a pressure relief/sustaining valve, in fire-fighting systems for relieving excess pressure caused by pumps, in irrigation systems as an effective protection against water hammer, in industrial plants, buildings.
ISO PN max.10 DN 50- 1200 Cast iron. In industrial plants, waste water and process engineering, food industry. For water, waste water and solids-laded fluids. Other fluids on request.
10
ACTAIR
All 90 valves with pneumatic actuators (single / double-acting) can be equipped with ACTAIR.
ACTELEC
All 90 valves with pneumatic actuators (single / double-acting) can be equipped with ACTELEC.
AMTRONIC + SMARTRONIC
All pneumatic actuators can be equipped to control the valve with the AMTRONIC control and feedback unit.
11
MAMMOUTH
Dry shaft concept
n
APORIS
Fusion-bonded epoxy coating
n
BOAVENT
Full bore
n
COBRA
Protected bolts
n
Only disc and rubber liner in contact KSB AMRI rubber liner
with fluid
n
Position indicator
Rubber-coated
n
Anti-shock device
n
Anti-hammer device
Epoxy coating
n
Epoxy coating
n
Safety
Actuator range
n
12
Success
2 1 3
n n n
COBRA-SGO rubber wedge gate valve SERIE 2000 double-check valves disc Piston check valves with cast iron casing and bronze internal parts
13
The Compagnie dAmnagement des Coteaux de Gascogne (CACG) designs, builds and operates dams, canals and highpressure water transfer systems, as well as conducting flood risk studies and proposing amelioration and remediation projects. With a capacity of 20 million cubic meters of water, the du Gabas reservoir maintains low volumes of rivers flowing from the Pyrenees and provides for irrigation needs of farmers in the surrounding region. Here, KSB installed the MAMMOUTH DN 1400 as the station supply valve and the DN 1200 as the output valve, while ISORIA valves DN 500 and 600 insulate the six station pumps. Most of the valves installed in the stations operated by the CACG are provided by KSB and have been for nearly 25 years. Customer: Compagnie dAmnagement des Coteaux de Gascogne (CACG) Scope of supply 1 x ISORIA DN 300 n 6 x ISORIA DN 500 n 7 x ISORIA DN 600
n
Commissioned: 2006
SAFCO (Saudi Arabian Fertilizer Company), the first petrochemical company in Saudi Arabia, operates 7 factories for the production of chemical fertilizers in the Al-Jubail industrial area. KSB cools SAFCOs ammonia production plant with reliable, robust pumps running in continuous operation. The super duplex steel SEZ tubular casing pumps, with vertical turbines and a power output of 3,500 kW, extract water from the cooling tower for circulation in the plants cooling process. A well-designed inlet chamber is essential for an even and vortex-free flow of water to the impellers. KSBs many years of experience with physical model analyses and computer-assisted model testing enabled the configuration of inlet structures to optimize both life cycle costs and pump availability. Customer: Saudi Arabian Fertilizer Company (SAFCO) Scope of supply Pumps n 3 x SEZ N 18-115 seawater intake pump n 3 x RDL 900-1050 water transfer pump n 3 x RDLO 400-525A water transfer pump n 2 x RDLO 600-600A water transfer pump Commissioned: 2005
14
Technology
Simulation of valve performance Cavitation analysis and prediction Stress analysis Fatigue analysis Hydraulic modeling
15
0570.026-EN / 08.11 / DAMM&BIERBAUM / KSB Aktiengesellschaft 2011 / Subject to technical modification without prior notice