Sie sind auf Seite 1von 48

Catalog AY-110-H

Pressure
Reducing
Valves
Direct acting, internally
and externally piloted
pressure reducing valves
and temperature regulators
for steam, air, water,
non-viscous liquids and
non-corrosive gases.

Bringing Energy Down to Earth


Say energy. Think environment.
And vice versa.
Any company that is energy conscious is also environmentally conscious. Less energy means less waste,
fewer emissions and a healthier environment.
In short, bringing energy and environment together
lowers the cost industry must pay for both. By helping
companies manage energy, Armstrong products and
services are also helping to protect the environment.
Armstrong has been sharing know-how since we
invented the energy-efficient inverted bucket steam
trap in 1911. In the years since, customers savings
have proven again and again that knowledge not
shared is energy wasted.

1998 Armstrong-Yoshitake, Inc.


Designs and materials are subject to change without notice.

Table of Contents
Introduction

Pressure Reducing Valve Selection Chart

Direct Acting PRVs

GD-30

GD-50

GD-6N, GD-6

GD-10, GD-10F, AF-10

10

GD-24

11

GD-20

12

GD-2000K (Pneumatic Loaded)

21-22

Internally Piloted PRVs


GP-31/32, GP-18/28, GP-1

13
14-16

Externally Piloted PRVs

17

GP-2000 (Pressure Pilot)

18

GP-11S

19

GP-2000K-1, GP-2000K-2 (Pneumatic Loaded Pilot)

20

Control Panels & Air Loaders

23

OBK-2000 (Pneumatic Temperature Pilot)

24

GP-2000R (Back Pressure Pilot)

25

Capacity Chart
(GP-2000, 2000K-1, 2000K-2, GD-2000K,
GP-2000R, GP-11S)

26

GP-2000 (On/Off)

27

Temperature Regulators

28

OB-30/31 (Self-Contained)

29-30

OB-2000 (Pilot Operated)

31-32

OB-2000PT (Pressure/Temperature Combination) 33-34


Typical Installation
Installation Drawings
Sizing Data
Metric Tables

35
36-38
39
40-47

Helping You Make the Most of Your Resources


Armstrong pressure reducing valves
(PRVs) and temperature regulators
help you manage steam, air and
liquid systems safely and efficiently.
And assure uninterrupted productivityby maintaining constant pressure or temperature for process
control. In short, Armstrong products
make using resources safe and
productiveas well as environmentally sound.

Direct Acting. The simplest of


PRVs, the direct acting type operates with either a flat diaphragm or
convoluted bellows. Since it is selfcontained, it does not need an external
sensing line downstream to operate.
It is the smallest and most economical of the three types and designed
for low to moderate flows. Accuracy
of direct acting PRVs is typically +10%
of the downstream set point.

For decades, Armstrong has


devoted itself to learningand
sharingall it can about energy
conservation as it relates to steam
equipment. As part of our product/
service network, PRVs and temperature regulators represent expanded
options for a reliable Armstrong
solution.

Internally Piloted PistonOperated. This type of PRV incorporates two valvesa pilot and
main valvein one unit. The pilot
valve has a design similar to the
direct acting valve. The discharge
from the pilot valve acts on top of a
piston which opens the main valve.
This design makes use of inlet
pressure in opening a larger main
valve than could otherwise be
opened. As a result, there is a
greater capacity per line size and
greater accuracy (+5%) than with
the direct acting valve. As with
direct acting valves the pressure
is sensed internally eliminating the
need for an external sensing line.

PRV Types
Steam, liquids and gases usually
flow at high pressures to the points
of final use. At these points, a
pressure reducing valve lowers the
pressure for safety and efficiency
and to match the requirements of the
application. There are three types
of pressure reducing valves.

Externally Piloted. In this type,


double diaphragms replace the
piston of the internally piloted
design. This increased diaphragm
area can open a larger main valve,
allowing a greater capacity per line
size than the internally piloted valve.
In addition, the diaphragms are more
sensitive to pressure changes, and
that means accuracy of +1%.
This greater accuracy is due to the
location, external of the valve, of
the sensing line where there is less
turbulence. This valve also offers
the flexibility to use different types
of pilot valves (i.e., pressure,
temperature, air loaded, solenoid
or combination).

Pressure Reducing Valve Selection


If the Fluid is

If Inlet
Pressure is

15 to 150
15 to 285
30 to 250

Steam

30 to 300
15 to 425
Water and
Non-Corrosive
Liquids

20 to 230
15 to 150

If Outlet
Pressure is

If Maximum Capacity
is Less Than

3 to 60
3 to 115
5 to 120
1.5 to 200
3 to 140
5 to 175
5 to 175
1.5 to 248

425 lbs/hr
740 lbs/hr
72,099 lbs/hr
58,032 lbs/hr
1,132 lbs/hr
186,496 lbs/hr
221,710 lbs/hr
25,706 lbs/hr

GD-6N
GD-30
GP-100, GP-32
GP-2000 Series
GD-30 & GD-50
GP-18/28
GP-1
GP-11S

9
7
14
18
7,8
14
14
19

7 to 80
3 to 60
7 to 100

155 GPM
18 GPM
1,292 GPM

GD-24
GD-6
GD-20

11
9
12

Look for Model

0 to 250
0 to 300

Air and
Non-Corrosive
Gases

GD-10F
5 to 125
931 SCFM
GD-10
5 to 125
1107 SCFM
GD-6
3 to 60
153 SCFM
GP-31A, 32A
5 to 120
25,955 SCFM
15 to 150
GD-20
7 to 100
11,000 SCFM
GD-30 & GD-50
15 to 250
3 to 150
408 SCFM
GP-18A, GP-28A
5
to
175
67,135
SCFM
30 to 250
30 to 300
GP-1A
5 to 175
79,815 SCFM
GD Models are Direct Acting
GP Models are Pilot Controlled

Find on
Page

10
10
9
14
12
7,8
14
14

Temperature Regulator Valve Selection


If the Service is

If Inlet
Pressure is

Type of Control

Temperature
Ranges

Accuracy

If Maximum
Capacity is
Less Than

Look for Model

Find on
Page

15 to 150

Self-Contained
Direct Acting

From 32F
to 302F
5 Ranges

+7F

1,745 lbs/hr

OB-30

29

OB-2000

31

OB-2000PT

33

OB-31

29

Heating
10 to 285

Self-Contained
Pilot Operated

Cooling

5 to 250

Self-Contained
Reverse Acting

From 18F
to 361F
6 Ranges

+2F

From 32F
to 302F
5 Ranges

+7F

58,032 lbs/hr

70 GPM

Direct Acting
For Steam, Air, and Non-Corrosive Gas Service
The simplest of pressure reducing
valves, the direct acting type
operates with either a flat diaphragm
or convoluted bellows. Since it is

Bronze body for


corrosion resistance.

Convoluted phosphor
bronze bellows allows
smaller body size than
conventional direct=acting
diaphragm PRVs.

Stainless steel stem and


bronze body minimize the
sticking common with
conventional values.

Hardened stainless steel


valve and seat with
spring return to assure
tight shutoff.

Integral mesh strainer


eliminates fouling due to dirt.

self-contained, it does not need an


external sensing line downstream to
operate. It is the smallest and most
economical of the three types and is

designed for low to moderate flows.


Accuracy of direct acting PRVs is
typically +10%.

Plastic cap doesn't


absorb heat so it won't
burn an operator's
hands. Permits changing
of set pressure without
tools. Simply lift cap and
turn to desired setting.

Interchangeable range
spring is easily changed
to different pressure
by removing four (4)
cap screws.

Downstream pressure
sensed outside the
bellows vs. inside, which
assures bellows integrity
and longer bellows life.

Integral sensing port to


elimiante piping of
external sensing line.

Direct Acting

GD-30
For Steam, Air, and Non-Corrosive Gases
food processing. It provides tight
shutoff for dead-end service on
steam and can be mounted in
any position.

+10% is acceptable. The GD-30


is well suited for laundry and dry
cleaning equipment, hospital
equipment, tire molds, humidifiers,
small heaters and applications in

The GD-30 is a compact, high


performance direct acting valve.
Economical to buy and use, its
ideal for those low to moderate flow
applications where accuracy of
Table 7-1. GD-30 Specifications
Service

Steam
Air
Non-Corrosive
Gases

Inlet
Pressure
(psig)

Reduced
Pressure
(psig)

15-250

3-15
7-60
50-140

Minimum
Differential
(psig)

MATERIALS

Maximum
Temperature
(F)

450

Body

Valve/Seat

Bellows

Cast
Bronze
ASTM
B584

Hardened
Stainless
Steel AISI
420

Phosphor
Bronze
ASTM
B103

Table 7-2. GD-30 CapacitiesSteam (lbs/hr)


Connection Size

Inlet
(psig)

Outlet
(psig)

1/2"

3/4"

1"

11/2"

2"

15

49

56

92

198

297

20

13
7

53
42

61
55

105
63

216
180

331
264

30

23
15
3

62
53
33

71
60
40

112
101
60

242
209
139

408
309
216

40

32
20
4

99
79
40

121
97
55

187
159
77

407
330
159

617
517
264

50

40
20
5

130
99
48

143
115
62

242
187
88

539
407
193

837
628
297

60

48
40
18
6

137
150
90
55

154
165
104
73

265
289
170
99

584
617
374
220

899
969
584
331

64
54
23
8
80
66
40
10

176
187
121
60
203
225
198
68

205
225
137
77
242
262
231
79

342
353
220
108
397
437
375
132

738
782
489
231
863
958
837
297

1,168
1,201
749
363
1,355
1,465
1,278
473

80

100

Inlet
(psig)

Outlet
(psig)

Connection Size
1/2"

3/4"

1"

120

96
70
45
12

231
276
240
110

276
311
267
121

452
518
450
198

11/2"

991 1,520
1,168 1,818
980 1,509
705
462

150

120
85
55
15

287
364
298
132

333
421
353
165

551
705
595
254

1,212 1,862
1,531 2,369
1,278 2,005
848
562

180

140
115
70
18

408
430
386
165

485
507
430
187

794
860
739
309

1,719
1,829
1,619
683

200

140
115
80
20

461
474
430
209

518
540
496
242

871
904
827
386

1,983 3,063
2,005 3,085
1,818 2,810
848 1,300

225

140
115
85
23

485
496
463
254

573
584
540
298

948
961
904
496

2,060
2,071
1,983
1,079

250

140
120
70
25

525
551
463
276

606 1,014 2,226 3,438


584 1,038 2,248 3,471
529 893 1,939 2,997
320 529 1,146 1,796

2"

2,677
2,832
2,501
1,035

3,195
3,207
3,063
1,675

NOTE: For air capacities (SCFM), multiply steam capacities by 0.36.


Maximum pressure reduction ratio 10:1

Table 7-3. GD-30 Dimensions and Weights


Connection Size
Symbol
1/2"
1/2"
11/2"
1
L (in)

3 1/8

3 3/8

2"

3 3/4

51/2

5 7/8

H1 (in)

H (in)

7 1/2

71/2

71/2

3
121/8

3
121/8

Wt (lbs)
Cv

4 1/4
1.3

41/4
1.5

41/4
2.5

18
5.6

18 3/4
8.5

H1

Also available with BSPT threads. Consult factory.


L

GD-30

All dimensions and weights are approximate. Use certified print for exact dimensions.

GD-50 Pressure Reducing Valve


For Steam, Air and Non-Corrosive Gas Service
The GD-50 is a compact, highperformance direct-acting valve.
Inexpensive to buy and use, it is
ideal for those moderate flow

hospital equipment, tire molds,


humidifiers, small heaters and
applications in food processing.
It provides tight shutoff for deadend service on steam.

applications which do not justify the


higher cost of pilot-controlled valves.
The GD-50 is well suited for laundry and dry cleaning equipment,

Table 8-1. GD-50 Specifications


Service

Steam
Air
Non-Corrosive
Gases

Inlet
Pressure
(psig)

Reduced
Pressure
(psig)

15-250

3-15
7-25
7-60
20-80
50-140

Minimum
Differential
(psig)

MATERIALS

Maximum
Temperature
(F)

410

Body

Valve/Seat

Bellows

Cast
Iron
ASTM
A278

Hardened
Stainless
Steel
AISI 420

Phosphor
Bronze
ASTM
B103

Table 8-2. GD-50 CapacitiesSteam (lbs/hr)


Inlet
(psig)

Outlet
(psig)

Connection Size
1/2"

3/4"

1"

15

49

56

92

20

13
7

53
42

61
55

105
63

30

23
15
3

62
53
33

71
60
40

112
101
60

40

32
20
4

99
79
40

121
97
55

187
159
77

50

40
20
5

130
99
48

143
115
62

242
187
88

60

48
40
18
6

137
150
90
55

154
165
104
73

265
289
170
99

64
54
23
8
80
66
40
10

176
187
121
60
203
225
198
68

205
225
137
77
242
262
231
79

342
353
220
108
397
437
375
132

80

100

Connection Size
3/4"
1"

Inlet
(psig)

Outlet
(psig)

1/2"

120

96
70
45
12

231
276
240
110

276
311
267
121

452
518
450
198

150

120
85
55
15

287
364
298
132

333
421
353
165

551
705
595
254

180

140
115
70
18

408
430
386
165

485
507
430
187

794
860
739
309

200

140
115
80
20

461
474
430
209

518
540
496
242

871
904
827
386

225

140
115
85
23

485
496
463
254

573
584
540
298

948
961
904
496

250

140
120
70
25

525
551
463
276

606
584
529
320

1,014
1,038
893
529

NOTE: For air capacities (SCFM), multiply steam capacities by 0.36.


Maximum pressure reduction ratio 10:1

Table 8-3. GD-50 Dimensions and Weights


Connection Size
Symbol
1/2"
3/4"

H
1"

L (in)
H1 (in)

4/

4/

4 3/8

155/64

155/64

155/64

H (in)

8 /

8 /

815/64

Wt (lbs)
Cv

3 8

15 64

61/2
1.3

3 8

15 64

61/2
1.5

7
2.5

H1

Also available with BSPT threads. Consult factory.

L
GD-50

All dimensions and weights are approximate. Use certified print for exact dimensions.

For Steam, Air and Water


The GD-6N and GD-6 are compact,
direct acting diaphragm valves
ideal for low-flow applications,
including laundry/dry cleaning
equipment, hospital equipment, tire/
plastic molds and food processing.
Lightweight and compact, the

valves mount in any position and


require no external sensing lines or
additional parts. External adjusting
screw with locking nut and cover
make for quick, easy setting and
adjustment. Tight shutoff for deadend service. Removable stainless

steel diaphragm, hardened


stainless steel working parts (6N),
integral removable strainer (6N)
and in-line renewable valve and
seat. Available in 3/8", 1/2", 3/4" and 1"
sizes with a choice of two set
pressure spring ranges.

Direct Acting

GD-6N (Steam), GD-6 (Liquid, Gas)

Table 9-1. GD-6N/GD-6 Specifications


Model

Inlet
Pressure
(psig)

Application

GD-6N

Reduced
Pressure
(psig)

Steam
15-150

Liquid
Gas

GD-6

Minimum
Differential
(psig)

Maximum
Temperature
(F)
450

3-15
and
15-60

175

MATERIALS
Body

Main Valve

Valve Seat

Diaphragm

Cast
Iron
ASTM
A278

Stainless Steel
AISI 304
Brass (w/Disc)
ASTM B16

Stainless Steel
AISI 420
Bronze
ASTM B584

Stainless Steel
AISI 304

Table 9-2. GD-6N CapacitiesSteam (lbs/hr)


Connection Size

Inlet
(psig)

Outlet
(psig)

3/8"

1/2"

3/4"

15

3-8

18

25

51

20

25

30

40

1"
76

Inlet
(psig)

50

13

12

17

34

51

3-10

21

30

59

89

18

14

20

41

61

15

19

28

55

83

3-12

24

34

68

102

23

16

23

47

71

20

21

30

59

89

3-15

27

38

76

115

32

21

30

60

90

100
125
150

25

28

40

79

119

4-20

33

47

94

140

60

75

Table 9-3.
GD-6N/GD-6 Dimensions and Weights

Connection Size

Outlet
(psig)

3/8"

1/2"

3/4"

40
32
5-25
48
40
6-30
60
48
7-37
65
10-50
13-60
15-60

25
33
39
30
37
45
37
47
54
61
69
84
99

36
47
55
43
53
64
52
67
77
87
98
119
142

73
94
111
55
107
128
104
135
153
173
196
239
283

Connection Size

1"
109
141
166
128
160
192
156
202
230
260
294
358
425

Symbol

3/8"

1/2"

3/4"

L (in)
H (in)
H1 (in)

61/2
91/2
21/4
61/8
12
.35

61/2
91/2
21/4
61/8
12
.5

71/4
101/4
3
7
18
1.0

E (in)
Wt (lbs)
Cv

1"
71/4
101/4
3
7
18
1.5

NOTE: For air capacities (SCFM), multiply steam capacities by .36.


Maximum pressure reduction ratio 10:1

Table 9-4. GD-6 CapacitiesWater (GPM)


P
5
10
15
25
50
75
100
125
147

Connection Size
3/8"

1/2"

3/4"

.8
1.1
1.4
1.8
2.5
3.0
3.5
3.9
4.2

1.1
1.6
1.9
2.5
3.5
4.3
5.0
5.6
6.1

2.2
3.2
3.9
5.0
7.1
8.7
10.0
11.2
12.1

1"
3.4
4.7
5.8
7.5
10.6
13.0
15.0
16.8
18.2

H1

GD-6N

All dimensions and weights are approximate. Use certified print for exact dimensions.

GD-10, GD-10F, AF-10


For Air and Non-Corrosive Gases
The GD-10/10F is a lightweight
direct acting diaphragm valve used
primarily for pneumatic tool air supply
and non-hazardous gas regulation.
Screwed connections make it easy
to support in any position without
external sensing lines or other parts.

dead-end service. GD-10 available


in sizes 1/4" - 2". Highly efficient
Model AF-10 air filters with zinc or
aluminum bodies are used to
remove liquids and solid particles
from compressed air. The AF-10
is available in sizes 1/4" - 1".

Zinc or aluminum bodies eliminate rust


and scale. Plug, seat and diaphragm
are renewable in-line, and you can
make quick adjustments externally with
locking handle. Quarter-inch pressure
gauge connection is standard, and all
units are capable of tight shutoff for

Table 10-1. GD-10/GD-10F/AF-10 Specifications


Inlet
Pressure
(psig)

Reduced
Pressure
(psig)

Minimum
Differential
(psig)

Maximum
Temperature
(F)

Model

Application

GD-10

Air and Other


Non-Corrosive
Gases

0-300

Air and Other


GD-10F Non-Corrosive
Gases

0-250

5-125

175

Air and Other


Non-Corrosive
Gases

0-250

175

AF-10

MATERIALS
Bowl

Body
Zinc

5-125

/ ", / ", / ", / "

14 3 8 1 2 34

175

Main Valve

Valve Plug

Zinc

Brass

/ ", / ", / ", / "

14 3 8 1 2 3 4

Zinc

Zinc

Zinc

Zinc

/ ", / ", / ", / " 1/4", 3/8", 1/2", 3/4"

14 3 8 1 2 34

Aluminum 1"

/ ", / ", / ", / "

14 3 8 1 2 3 4

Aluminum 1"-2" Nylon 1"-2"

Aluminum 1"-2"

Diaphragm
Nitrile

Zinc

Brass

Nitrile

Aluminum 1"

NOTE: For 1/2" 316 stainless steel air valve, consult factory.

Table 10-2. GD-10 Dimensions and Weights

Table 10-4. AF-10 Dimensions and Weights

Table 10-3. GD-10F Dimensions and Weights

Connection Size

Connection Size

CV

1.4

/ " 1/2"
25/8 25/8
53/8 53/8
11/2 11/2
11/2 11/2
38

1.4

1.4

41/4
71/8
23 8

3 9 16

H (in)
H1 (in)

3
5.8

10
43

Wt (lbs)
CV

1" 11/4" 11/2"

2
2.6

L (in)

/"
23/4
93/8
53/4
21/2

/"
23/4
9 3/8
53/4
21/2

/"
23/4
9 3/8
53/4
41/2

/"
7
3 /8
107/8
63/8
41/2

1.4

1.4

1.4

2.6

14

GD-10 2"

38

12

Symbol

34

GD-10F

H (in)
H1 (in)

/"
2 3/4
63/8
53/4

Wt (lbs)

L (in)

AF-10

38

12

34

/"

1"

23/4

23/4

37/8

43/4

63/8
53/4

63/8
5 3/4

7
63/8

113/8
10

/"

14

/"

GD-10

Symbol

2"
6
93/4

/"
31/2
57/8
11/2
34

/"
25/8
53/8
11/2
Wt (lbs) 11/2
14

Symbol
L (in)
H (in)
H1 (in)

Connection Size
3/4" 1", *11/4", 11/2"
46
104
43
98
51
115
74
166
52
116
68
153
86
192
63
141
81
182
102
227
202
90
261
117
314
140
118
264
150
336
180
403

1/4", 3/8", 1/2"

2"**
579
720
852
1127
806
1139
1426
1045
1355
1687
1503
1941
2339
1958
2496
2991

Connection Size
Inlet Outlet
(psig) (psig) 1/4", 3/8", 1/2" 3/4" 1", *11/4", 11/2"
117
45
85
190
80
101
187
419
125
13-62
118
220
491
125
85
159
356
85
129
239
535
150
15-75
139
259
579
125
126
234
523
175
100
148
276
616
18-87
161
299
667
665
298
125
160
200 20-100
755
338
182
250 25-125
931
417
224
300 30-150
267
496
1107
350** 40-175
425** 75-200

2"**
1410
3108
3643
2640
3968
4295
3884
4573
5020
4934
5599
7005
8329
9652
11467

*GD-10F not available above 3/4". **2" GD-10 valve maximum inlet pressure is 425 PSI.

10

25
25
27
40
28
37
46
34
44
54
48
63
76
63
81
97

H1

Table 10-5. GD-10/GD-10F CapacitiesAir (SCFM)


Inlet Outlet
(psig) (psig)
8
15
23
20
30
5-15
32
25
40
5-20
40
32
50
5-25
60
48
75
7-37
80
100
65
10-50

H1
H1

H1

All dimensions and weights are approximate. Use certified print for exact dimensions.

For Water
An industrial-grade valve for water
systems, the GD-24 is lightweight,
compact and economical. Comes
with screwed connections and will

mount in any position. Requires no


external sensing lines. Bronze body
and high-temperature diaphragm
suitable for hot or cold water

service. Valve, seat and diaphragm


are renewable in-line. External
adjusting screw with lock.
Six sizes, 1/2" through 2".

Table 11-1. GD-24 Specifications


Application

Maximum Inlet
Pressure
(psig)

Hot or
Cold
Water

20-230

Reduced
Pressure
Range (psig)

Minimum
Differential
(psig)

7-80

MATERIALS

Maximum
Temperature
(F)

175F*

Direct Acting

GD-24

Body
Cast Bronze
ASTM 584

Main Valve

Valve Seat

Diaphragm

Cast Bronze
ASTM 584

Stainless
Steel
AISI 304

NBR**

*With Viton diaphragm, maximum temperature is 250F. **Viton optional.

Table 11-2. GD-24 CapacitiesWater (GPM)


P
(psig)

1/2"

3/4"

7
10
15
25
50
75
100
125
150
175
200

3
5
6
8
11
13
15
17
18
20
21

4
6
7
10
14
17
19
21
23
25
27

Connection Size
1"
11/4"
7
9
10
13
12
16
15
20
21
28
26
35
30
40
34
45
37
49
40
53
42
57

Table 11-3. GD-24 Dimensions and Weights


11/2"
16
22
27
35
50
61
70
78
86
93
99

2"
22
32
39
50
71
87
100
112
123
132
141

Symbol
L (in)
H1 (in)
H (in)
Wt (lbs)
Cv

/"
31/4
13/4
73/4
12

4
1.5

/"
31/2
34

2
81/2
51/4
2

Connection Size
1"
11/4"
4
43/4
1
2 /2
31/4
5
9 /8
111/4
1
7 /4
10 3/8
3
4

11/2"
6
31/2
131/2
18
7

2"
71/4
41/2
16
311/2
10

NOTE: Maximum pressure reduction ratio 10:1

H1

L
GD-24

All dimensions and weights are approximate. Use certified print for exact dimensions.

11

GD-20
For Air, Water, Non-Corrosive and Non-Viscous Liquids
The GD-20 offers high capacity and
highly accurate control with a large,
cupped diaphragm for a long stroke.
Compact and rugged, the GD-20s
composition valve and bronze seat
mean high performance over a long

service life. Well suited to nonviscous liquid pressure reduction,


the valve is widely applied in
domestic water applications,
construction equipment, irrigation,
tank car loading and industrial or

commercial air conditioning.


Upstream variations do not affect
balanced pressure valve, and
composition disc assures tight
shutoff. Turndown ratio is 10:1,
and sizes range from 2" through 6".

Table 12-1. GD-20 Specifications


Application

Inlet
Pressure
(psig)

Liquid
Gas

150

Reduced
Pressure
(psig)
2"-3"

4"-6"

7-36
37-100

7-36
37-72

Maximum
Temperature
(F)

Minimum
Differential
(psig)

175

Table 12-2. GD-20 CapacitiesAir (SCFM)


Inlet
(psig)

Outlet
(psig)

15

8
13
2-10
18
15
2-12
23
20
3-15
32
25
4-20
40
32
5-25
48
40
6-30
60
48
7-37
90
70
10-50
100
80
13-60
100
90
15-80

20

25

30

40

50

60

75

100

125

150

2"
283
196
340
233
320
396
270
340
441
344
460
537
418
544
640
491
620
736
600
780
884
567
936
1,130
965
1,242
1,376
1,430
1,509
1,630

21/2"
512
342
598
408
558
684
474
596
1,024
603
797
943
728
948
1,115
859
1,076
1,288
1,051
1,358
1,546
992
1,637
1,977
1,688
2,174
2,408
2,502
2,640
2,852

Connection Size
3"
4"
658
1,243
440
831
769
1,452
525
991
717
1,354
880
1,662
609
1,150
767
1,448
1,316
2,486
775
1,464
1,024
1,934
1,213
2,291
936
1,769
1,218
2,302
1,433
2,707
1,105
2,087
1,384
2,614
1,655
3,126
1,351
2,553
1,745
3,297
1,988
3,755
1,275
2,408
2,105
3,976
2,542
4,801
2,170
4,050
2,795
5,280
3,096
5,848
3,217
6,076
3,395
6,413
3,667
6,927

MATERIALS
Body

Main
Valve

Valve Seat

Diaphragm

Connection

Cast
Iron
ASTM
A48

NBR

Bronze
B-16
Alloy 377

NBR

ANSI
125 lb
Flg

Table 12-3. GD-20 CapacitiesWater (GPM)


5"
1,371
917
1,602
1,094
1,494
1,833
1,268
1,598
2,742
1,615
2,134
2,526
1,951
2,539
2,986
2,302
2,883
3,448
2,816
3,637
4,141
2,656
4,385
5,295
4,521
5,823
6,450
6,701
7,073
7,640

6"
1,975
1,320
2,307
1,575
2,151
2,639
1,826
2,300
3,949
2,325
3,072
3,638
2,809
3,656
4,300
3,315
4,152
4,966
4,054
5,237
6,158
3,824
6,315
7,625
6,511
8,385
9,288
9,650
10,185
11,000

P
(psig)
7
10
15
20
25
35
50
75
85
100
125
143

Connection Size
2"
36
51
62
72
80
95
113
139
148
160
179
191

2 1/2"

3"

4"

5"

6"

63
89
109
125
140
166
198
242
258
280
313
335

81
114
140
161
180
213
255
312
332
360
402
430

152
215
263
304
340
402
481
589
627
680
760
813

168
237
291
336
375
444
530
650
691
750
838
897

242
342
418
483
540
639
764
935
996
1,080
1,207
1,292

NOTE: Minimum flow is 1.3 GPM.

Table 12-4. GD-20 Dimensions and Weights


Size

Face-toFace (in)

A (in)

H (in)

H1(in)

Cv

2"
21/2"
3"
4"
5"
6"

7 5/8
10 5/8
105/8
121/8
15
153/4

6
7
71/2
9
10
11

161/4
211/2
22 9/16
251/16
33
359/16

31/8
41/16
4 9/16
51/4
61/2
71/2

16
28
36
68
75
108

NOTE: Maximum pressure reduction ratio 10:1

NOTES: Available in sizes below 2" upon request.


Differential valve (GD-21) available upon request.
Back pressure valve (GD-20R) available upon request.
H1

12

All dimensions and weights are approximate. Use certified print for exact dimensions.

Weight
(lbs)
43
88
97
154
317
381

For Steam, Air, and Non-Corrosive Gas Service


This type of PRV incorporates two
valvesa pilot and main valve
in one unit. The pilot valve has a
design similar to the direct acting
valve. The discharge from the pilot

Removable cap to allow


easy adjustment.

Enclosed spring chamber


eliminates diaphragm or
spring fouling due to
atmospheric conditions.

valve acts on top of a piston which


opens the main valve. This design
makes use of inlet pressure in
opening a larger main valve than
could otherwise be opened directly.

As a result, there is a greater


capacity per line size and greater
accuracy (+5%) than with the
direct acting valve.

Internally Piloted

Internally Piloted

Pilot valve and seat


removable with PRV in line.

Carbon rings to minimize


piston seizing.

Internal sensing port


eliminates downstream
piping, allowing easy
installation in tight spots.
Inlet screen minimizes fouling
of pilot value due to dirt.

Main valve and seat


removable with PRV in line.
Dual seating surfaces
constructed from hardened
stainless steel reduce wire
drawing on low load
applications adding to a
long service life.

Characterized ports
stabilize control over
entire stroke of the valve.

13

GP-100, GP-32, GP-18/28, GP-1


For Steam, Air, and Non-Corrosive Gas
ratings to assure the most economical match to your application.
Internally piloted GP-Series valves
are best suited for use in continuous distribution applications.

The GP-100, GP-32, GP-18/28,


GP-1 Series valves are pilotcontrolled for accurate regulation
of pressure under wide-ranging
flow. Internal pilot design eliminates external components
and piping.

Completely supported by piping,


lightweight GP-Series valves install
easily with NPT or flanged connections. A stainless steel diaphragm,
hardened stainless steel working
parts and integral removable

Internally piloted GP-Series valves


are capable of larger capacity and
greater accuracy than direct acting
valves. Bodies have three pressure

strainer team up to provide high


performance over a long, troublefree service life. Valves are
equipped with a caged main
valve assembly (separate
shutoff surfaces and flow control
ports), piston valve rings for
longer life and an external
adjusting screw with locking
nut and cover. All working parts
are renewable in-line. For air
service, a Teflon seat assures
tight shutoff.

Table 14-1. GP-100, GP-32, 31A/32A, 18/28, 18A/28A, GP-1/1A Specifications


Model
Number

Pressure
Inlet Reduced Application
(psig)
(psig)

GP-100
GP-32
15-150

GP-18
GP-28
5-115
30-250 **
115-175

GP-1

450

Air & Gas

250

5-60
60-175

Minimum
Diff.(psig)

Body

Main Valve/
Valve Seat

Steam

450

Air & Gas

250

Cast Iron
ASTM A48
CL30
10

535
250

Stainless
Steel
AISI 403
(Valve)
Stainless
Steel
AISI 420
(Seat)

15
Air & Gas

Pilot Valve/
Seat

*Piston/
Cylinder

Carbon
Steel
ASTM
GR. WCB

Piston
Bronze
ASTM C83600
Stainless Steel
Cylinder
AISI 403/420
Bronze
w/Teflon Disc ASTM C36000

Stainless Steel
AISI 403/420
Stainless Steel
AISI 403/420
w/Teflon Disc
Stainless Steel
AISI 403/420

Stainless Steel
AISI 304
Stainless Steel
AISI 420

Stainless Steel
AISI 403/420
w/Teflon Disc

NOTE: Sizes 2" and below are NPT connections. Sizes 2" and larger are standard with flanged connections.
Models GP-100, GP-32 are available with air-loaded pilots - consult factory.
GP-18/28 & GP-1 maximum reduction ratio 10:1
GP-100, GP-32 maximum reduction ratio 20:1
*AISI 420 stainless steel piston & cylinder available - consult factory.
**6" & 8" GP-28 available only in 5-57 & 57-115 spring. 10" GP-28 available only in 5-57.

GP-100

14

Diaphragm

Stainless Steel
Stainless
Steel AISI 420 AISI 403/420
10

Steam
30-300

GP-1A

Steam
5-125

GP-31A
GP-32A

GP-18A
GP-28A

Maximum
Temp.(F)

GP-32

GP-28

Internally Piloted

GP-100, GP-32, GP-18/28, GP-1


For Steam, Air, and Non-Corrosive Gases
Table 15-1. GP-100, GP-32, GP-31A/32A Dimensions and Weights
Symbol

1/2

3/4

L (in)
H (in)
H1 (in)

57/8
81/4
21/2
131/2

1.5

61/8
81/4
21/2
131/2

2.3

"

GP-100, GP-31A wt (lbs)


GP-32/32A wt (lbs)
Cv

"

1"
6 5/16
8 7/8
2 5/8
17

Connection Size
11/2"
71/2
913/16
31/4
25 3/4

11/4"
71/2
913/16
31/4
25 3/4

6.5

2"
811/16
1011/16
311/16
38
43
16

21/2"
95/8
111/2
4

53
25

3"
113/8
131/2
413/16

75
36

4"
13
153/8
5 9/16

116
64

NOTE: GP-100 is 1/2"-2" NPT, GP-32 is 2"-4" ANSI 125 lb flanged. For sizes 5" to 8" consult factory.

Table 15-2. GP-18/28, 18A/28A Dimensions and Weights


Symbol
L (in)
H (in)
H1 (in)
GP-18/18A wt (lbs)
GP-28/28A wt (lbs)
Cv

12

/"
85/8

/"
83/4

12
3
22

2.1

12
3
22

3.5

1"
101/8
15
4
35

6.25

34

11/4"
105/8
15
4
38

9.7

11/2"
111/8
15
4
42

14

Connection Size
21/2"
2"*
3"
12
12
10 3/8
16
19
20
4
5
6
58

55
77
97
20.8
36
46

4"
143/4
23
6

192
79.5

5"
187/8
27
9

310
114

6"
197/8
30
9

438
152

8"
231/2
32
11

710
265

10"
281/8
34
13

900
412

NOTE: GP-18, 1/2"-2" are flanged and supplied with NPT companion flanges, gasket and boltsnot shown. L dimensions include the companion flanges.
GP-28 is ANSI 250 lb flanged.
* GP-28 2" flanged face to face 9 1/2"

Table 15-3. GP-1/1A Dimensions and Weights


Connection Size
Symbol

34

L (in)
H1 (in)

9
31/8
14
31
3.5

/"

H (in)
GP-1/1A wt (lbs)
Cv
NOTE:

11/4"
11
33/4
17
59
9.7

1"
101/4
31/2
161/2
50
6.25

11/2"
111/8
33/4
17
59
14

2"*
117/8
41/4
181/2
74
20.8

21/2"
113/8
5
20 3/4
113
36

3"
133/8
51/2
22
150
46

4"
153/8
6 3/4
25
226
79.5

5"
191/4
83/4
295/8
353
114

6"
201/2
83/4
31
513
152

/4"-2" are flanged and supplied with NPT companion flanges, gasket and boltsnot shown. L dimensions include the companion flanges.
GP-1 2" and larger are ANSI 300 lb flanged.
* GP-1 2" flanged face to face 10 1/4"

H1

H1

H1

GP-100, GP-31A

GP-32

All dimensions and weights are approximate. Use certified print for exact dimensions.

GP-28, GP-1

15

GP-100, GP-32, GP-18/28, GP-1


Capacities for Steam, Air, and Non-Corrosive Gas
NOTES: For GP-100, GP-32 capacities, multiply Table 16-1 values by factor listed in Table 16-2.
For GP-31A/32A air capacities (SCFM), multiply steam capacities for GP-31/32 by 0.36.
For GP-18A/28A/1A air capacities (SCFM), multiply steam capacities by 0.36.

Table 16-1. GP-18/28/1 CapacitiesSteam (lbs/hr)


Connection Size

Inlet Outlet
(psig) (psig)
20
30

11/4"

11/2"

2"

21/2"

3"

4"

5"

6"

8"

10"

371

576

370

574

831

1,234

2,136

2,730

4,717

6,764

9,019

15,724

24,447

828

1,231

2,130

2,721

4,704

6,745

8,994

15,680

268

478

24,378

741

1,070

1,590

2,752

3,516

6,077

8,714

11,618

20,256

126

209

31,492

374

580

837

1,244

2,153

2,751

4,755

6,818

9,091

15,850

25

166

24,642

276

494

766

1,106

1,644

2,845

3,635

6,282

9,008

12,011

20,940

5-20

32,556

196

327

585

907

1,310

1,946

3,367

4,303

7,436

10,663

14,218

24,787

38,537

40

152

254

454

704

1,016

1,509

2,612

3,338

5,769

8,272

11,030

19,229

29,896

32

197

329

588

912

1,316

1,956

3,383

4,325

7,475

10,719

14,293

24,918

38,740

5-25

232

387

691

1,073

1,549

2,301

3,983

5,089

8,796

12,613

16,817

29,319

45,582

60

219

365

652

1,012

1,460

2,169

3,754

4,797

8,290

11,888

15,851

27,634

42,963

48

283

472

842

1,307

1,886

2,802

4,849

6,196

10,709

15,356

20,474

35,696

55,496

8-37

322

537

959

1,488

2,148

3,191

5,522

7,056

12,195

17,487

23,315

40,648

80

285

476

849

1,318

1,903

2,827

4,892

6,251

10,804

15,493

20,657

36,014

63,197

/"

34

/"

1"

5-10

125

208

20

124

207

5-15

161

30
40

50

75

65

364

606

1,083

1,680

2,425

3,603

6,236

7,968

13,771

19,747

26,329

45,903

10-50

412

687

1,226

1,903

2,746

4,080

7,061

9,022

15,593

22,360

29,813

51,976

100

352

586

1,047

1,624

2,345

3,483

6,029

7,704

13,314

19,092

25,456

44,381

100

80

453

755

1,349

2,092

3,019

4,486

7,764

9,921

17,146

24,587

32,783

57,154

13-62

502

836

1,493

2,317

3,344

4,969

8,600

10,989

18,992

27,233

36,311

63,305

120

418

697

1,244

1,931

2,786

4,140

7,165

9,155

15,822

22,689

30,252

52,741

125

150*

175

200

225

250**

300

12

80,808

98,421

100

521

869

1,551

2,408

3,475

5,163

8,936

11,418

19,733

28,296

37,728

65,775

15-75

591

986

1,769

2,732

3,943

5,858

10,139

12,955

22,390

32,107

140

484

807

1,441

2,236

3,228

4,796

8,300

10,606

18,330

26,284

42,809

74,634

120

589

982

1,753

2,721

3,927

5,835

10,098

12,903

22,300

31,978

42,637

74,334

116,034

18-87

681

1,135

2,027

3,147

4,541

6,747

11,678

14,922

25,789

36,980

85,963

160

550

917

1,638

2,542

3,669

5,451

9,435

12,056

20,836

29,878

49,307

55,805

97,291

140

657

1,094

1,954

3,033

4,377

6,503

11,255

14,381

24,855

35,641

20-100

771

1,285

2,295

3,561

5,140

7,636

13,217

16,888

29,187

41,854

180

617

1,028

1,835

2,848

4,111

6,107

10,570

13,506

23,342

33,472

133,647

151,260

140

807

1,346

2,403

3,730

5,383

7,998

13,842

17,687

30,568

43,833

23-112

861

1,435

2,562

3,976

5,738

8,526

14,756

18,855

32,586

46,727

62,303

108,620

180

791

1,318

2,354

3,653

5,272

7,833

13,557

17,323

29,939

42,931

160

877

1,462

2,610

4,051

5,847

8,686

15,034

19,210

33,200

47,608

140

947

1,579

2,819

4,375

6,315

9,382

16,238

20,749

35,859

51,420

25-125

951

1,584

2,829

4,391

6,337

9,415

16,295

20,821

35,985

51,601

68,801

119,945

186,496

180

1,090

1,817

3,245

5,036

7,269

10,799

18,691

23,883

41,277

59,189

78,919

160

1,154

1,924

3,436

5,332

7,696

11,433

19,789

25,286

43,700

62,664

83,552

30-150 1,130

1,883

3,360

5,220

7,535

11,193

19,373

24,754

42,782

61,348

81,797

168,873

*GP-100, GP-32 to be used up to 150 psig inlet maximum.


**GP-18/28 to be used up to 250 psig inlet maximum.
GP-1 only to be used up to 300 psig inlet maximum.
GP-1 not available in these sizes.

Table 16-2. GP-100, GP-32 Capacity Factors


1/2"
3/4"
Connection
Factor

16

.714

.657

1"

11/4"

11/2"

2"

21/2"

3"

4"

.640

.670

.643

.769

.694

.783

.805

Externally Piloted
For Steam Service
This type is similar to the internally
piloted piston-operated valve in that
a pilot and main valve are utilized.
However, double diaphragms
replace the piston. This increased
diaphragm area can open a larger
main valve, allowing a greater

Interchangeable
springsregardless of
valve sizemeans more
flexibility in applications.

Enclosed spring chamber


eliminates dirt fouling.

Dual stainless steel


diaphragms provide
corrosion resistance.

All cast mating parts are


male and female to reduce
the chance of leaks at
gasket surfaces and assure
proper alignment.

Ductile iron body


provides a wider range
of applications than cast
iron and offers a less costly
option to cast steel.

capacity per line size than the


internally piloted piston-operated
valve. In addition, the diaphragms
are more sensitive to pressure
changes which results in accuracy
of +1%. This greater accuracy is due
to the positioning of the sensing line

downstream where there is less


turbulence. This valve also offers
the flexibility to use different types
of pilot valves (i.e., pressure, temperature, air loaded, solenoid
or combination).

Available in both
integral and remote
mounted pilot.

Integral strainer
protects the pilot valve
from failure due to dirt.
Easily removable
copper tubing permits
troubleshooting while
valve is in line.
Easy access to main
valve for quick inspection
or maintenance by
removing main valve
spring and screen and
lifting valve from stem. No
special tools needed.

Design eliminates copper


tubing from passing around
the bottom diaphragm
housing, minimizing
chance of damage during
shipping or installation.

17

GP-2000
For Steam Service
The GP-2000 is a high performance,
externally piloted reducing valve
for large capacity requirements.
Typical use is on intermittent service,
including applications such as heat
exchangers, steam coils, rotating
dryers, process equipment and
heating systems.

With a 20:1 rangeability and high Cv,


the GP-2000 is reliable and accurate
(+ 1% of pressure set point from 5%
to 100% of flow) over a long, troublefree service life. Hardened stainless

steel working parts are renewable


in-line. Single seated for dead-end
service. Available with both NPT and
flanged connections in 1/2" through
6" sizes.

Table 18-1. GP-2000 Specifications


Application

Inlet
Pressure
(psig)
NPT
15-300
**15-185
150 lb. Flg.

Steam

**15-300
300 lb. Flg.

Reduced
Pressure
(psig)

Spring
Color

* 1.5-3

Yellow

3-21

Yellow

15-200

Green

Maximum
Temperature
(F)

Minimum
Differential
(psig)

450

MATERIALS
Pilot
Valve/Seat

Main
Valve/Seat

Body
Ductile
Iron
ASTM
A536

Stainless Steel
AISI 420

Diaphragm

Color

Stainless Steel
AISI 301

Dark
Gray

* NOTE: When using this spring range, remove one (1) pilot diaphragm. Capacities are reduced by 1/2 of capacity chart when this spring is being used.
**6" valve standard in remote mount with 125 or 250 lb. ANSI flanges and cast iron body.

Table 18-2. GP-2000 Dimensions and Weights


Size
(in)
1/2"
3/4"
1"
11/4"
11/2"
2"
21/2"
3"
4"
*6"

L (in)
NPT
515/16
515/16
6 5/16
71/8
71/8
91/8

150#

8 5/8
1015/16
113/4
131/2
181/2

300#

91/8
111/2
127/16
141/8
19

A
(in)

F
(in)

715/16
715/16
815/16
815/16
815/16
1015/16
1313/16
1313/16
1513/16
19 3/4

615/16
615/16
71/8
71/8
71/8
7 3/4
8 5/16
8 3/4
97/16
111/8

H
Integral
(in)
15 3/4
15 3/4
1515/16
171/8
171/8
19 5/8
213/4
22 5/8
2515/16

H
Remote
(in)
141/4
141/4
147/16
151/8
151/8
16
175/16
175/16
201/8
28

H1
(in)

H2
(in)

63/4
63/4
615/16
75/8
75/8
81/2
913/16
107/16
125/8
16

95/8
95/8
10
111/8
111/8
125/8
143/4
153/4
191/4

Weight (lbs)
NPT
34
34
44
51
51
75

311/2

*6" valve standard in remote mount with 125 or 250 lb. ANSI flanges.

150#

81
142
155
247
510

3.2
(82)

3.2
(82)

2.52
(64)

H2
L
H1

H2
H1

H1

H1

1/4 NPT

A
1/4 NPT

GP-2000

18

Cv
5.0
7.2
10.9
14.3
18.8
32
60
78
120
223

For Capacities, see page 26

300#

84
150
166
264
550

All dimensions and weights are approximate. Use certified print for exact dimensions.

Externally Piloted

GP-11S Carbon Steel Body


For Steam Service
The GP-11S is a high-performance,
externally piloted reducing valve for
larger capacity requirements. Applications include heat exchangers,
steam coils, rotating dryers, process
equipment and heating systems.

All working parts of the GP-11S


are renewable in-line. It also has
hardened stainless steel working
parts, double stainless steel
diaphragms and a single-seated
main valve for dead-end service.

Table 19-1. GP-11S Specifications


Application

Inlet
Pressure
(psig)

Reduced
Pressure
(psig)

Minimum
Differential
(psig)

Maximum
Temperature
(F)

15-425

1.5-3
3-30
20-100
80-248

500

Steam

MATERIALS
Body
Carbon
Steel
Grade
WCB

Pilot
Valve/Seat Valve/Seat Diaphragm

Color

Stainless Stainless
Steel
Steel
AISI
AISI
420
420

Black

Stainless
Steel
AISI
301

NOTE: Remote mount pilot available upon request. Air-loaded pilots also available.

Table 19-2. GP-11S Dimensions and Weights


Connection Size
Symbol
1/2"
3/4"
11/4"
1"
1
6 /4
6
6
7
Face-to-Face

11/2"

2"

87/8

57/8

87/8
61/2

61/2

107/8
71/2

165/8

173/4

173/4

201/4

51

56

56

85

10.9

14.3

18.8

32.0

A (in)
H1 (in)

77/8

77/8

87/8

55/8

55/8

H (in)

161/4

161/4

Wt (lbs)
Cv

39

39
7.2

5.0

For Capacities, see page 26

NOTE: 1/2" Thru 2" standard is integral mount.

GP-11S

H1

All dimensions and weights are approximate. Use certified print for exact dimensions.

19

GP-2000K-1/GP-2000K-2
Air Loaded Valves for Steam
A high performance externally air
piloted pressure reducing valve,
the GP-2000K-1/GP-2000K-2 is
an ideal choice when set point
changes are frequent and access
to the PRV is difficult. The valve

comes totally assembled and


requires no field installation except
downstream sensing line and air
line connection. High Cv, 20:1
turndown ratio and accurate
control + 1% of pressure set point

from 5% to 100% of flow. A rugged


ductile iron body, hardened stainless
steel working parts, double
stainless steel diaphragms and inline repairability add up to reliability
on the job. Single seated for
dead-end service.

Table 20-1. GP-2000K-1/GP-2000K-2 Specifications


Application

Inlet
Pressure
(psig)

Steam

NPT
15-300
*150 lb Flg
15-185
*300 lb Flg
15-300

Reduced
Pressure
(psig)

Minimum
Maximum
Temperature Differential
(psig)
(F)

K-1
7-125
450

Main
Valve/Seat

Body
Ductile
Iron
ASTM
A536

K-2
15-200

MATERIALS
Pilot
Valve/Seat

Stainless Steel
AISI 420

*NOTE: 6" valve standard in remote mount with 125 or 250 lb. ANSI flanges and cast iron body. Consult factory.

Diaphragm

Color

Stainless
Steel
AISI
301

Dark
Gray

For Capacities, see page 26

Table 20-2. GP-2000K-1/GP-2000K-2 Dimensions and Weights


300#

A1
(in)

F
(in)

715/16

67/8

*H
H
H1
Integral Remote
(in)
(in)
(in)
125/8 111/4 63/4

67/8

125/8

Face-to-Face (in) L

Size

150#

**A2
(in)

Weight (lbs)
Cv

1/2"

NPT
515/16

3/4"

515/16

715/16

1"

65/16

815/16

77/8

13

11/4"

71/8

815/16

77/8

131/8

51

71/8

815/16

77/8

131/8

117/8
117/8

11/2"

75/8

51

2"

91/8

8 5/8

91/8

1015/16

77/8

165/8

123/4 81/2

75

81

84

32

21/2"

1015/16

111/2 1313/16

87/8

191/4

141/16 913/16

142

150

60

3"

113/4

127/16 1313/16

87/8

201/8 1411/16 107/16

155

166

78

4"

131/2

141/8 1513/16

97/8

235/8

247

264

120

111/4

NPT
34

150#

300#

34

7.2

44

10.9

75/8

14.3
18.8

63/4

113/16 615/16

167/8 125/8

5.0

*For GP-2000K-2, add 11/4" to H dimension.


**For GP-2000K-2, A2 dimension = 63/4."
For GP-2000K-2 weight, add 6 lbs.

A2

A2

H
L
H1

H1

A1

A1

20

H1

A1

A1

GP-2000K-1

GP-2000K-2

1:1 Air to Steam Ratio

1:2 Air to Steam Ratio

All dimensions and weights are approximate. Use certified print for exact dimensions.

GD-2000K
Air Loaded Valves for Steam
The GD-2000K is an ideal choice
when set point changes are frequent, access to the valve is difficult
and steam quality is poor. The GD2000K comes with either NPT or

flanged connections for quick, easy


installation. It also comes with a
durable ductile iron body and
features double stainless steel
diaphragms and hardened stain-

less working parts, renewable


in-line. High Cv and 10:1 turndown ratio. Single seated for
dead-end service.

Table 21-1. GD-2000K Specifications


Application

Steam

Inlet
Pressure
(psig)

Reduced
Pressure
(psig)

Maximum
Temperature
(F)

Minimum
Differential
(psig)

NPT
15-300
150 lb. Flg.
15-185

7-200

450

MATERIALS
Main
Diaphragm
Valve/Seat

Body
Ductile
Iron
ASTM
A536

300 lb. Flg.


15-300

Stainless Steel
AISI 420

Table 21-2. GD-2000K Dimensions and Weights


Size

Dark
Gray

For Capacities, see page 26

NPT

150#

300#

H1
(in)

27/8

9 5/8

77/8

27

95/8

77/8

Face-to-Face (in)

Stainless
Steel
AISI
301

Color

Weight (lbs)

H
(in)

A
(in)

NPT

150#

300#

Cv
5.0

1/2"

57/8

3/4"

57/8

27/8

27

7.2

1"

61/4

31/16

10

87/8

35

10.9

11/4"

71/8

31/2

111/8

87/8

43

14.3

11/2"

71/8

31/2

111/8

87/8

43

18.8

2"

81/2

91/8

41/4

125/8

107/8

66

72

73

32.0

21/2"

107/8

111/2

43/4

143/4

137/8

135

136

60.0

3"

113/4

121/2

51/2

153/4

137/8

146

152

78.0

4"

131/2

141/8

61/2

191/

157/8

230

240

120.0

H1

GD-2000K

All dimensions and weights are approximate. Use certified print for exact dimensions.

21

Air Loading Charts


Chart 22-1. GP-2000K 1 & 2
200

How to Use Chart 22-1


Enter the graph at the outlet pressure from the
value on the vertical axis.
Move horizontally to the right until the air loading
lines are intersected.
Then read vertically below the point of intersection
for the air loading pressure required.

180

160

140

0K

Using 1^" GD-2000K


Steam Inlet Pressure P1
Steam Outlet Pressure P2
Differential Pressure P

200

120

GP

100

Read horizontally across the bottom of the chart


to the 125 psig P line.

20
00
K

80

200 psig
75 psig
125 psig

GP

STEAM OUTLET PSIG

Selection Example (Chart 22-2)

Read vertically up to the diagonal line that


corresponds to a 1^" GD-2000K.

60

Read horizontally to the left for additional air


signal required.

40

75 psig
12 psig
87 psig

Outlet Pressure P2
Additional Air P Air
Total Air Pressure Required

20

20

40

60

80

100

120

140

AIR LOADING PSIG

Chart 22-2. GD-2000K


35

4"
30
2"
3"

ADDITIONAL AIR REQUIRED

25

11/2"

20
11/4"
21/2"
15

1"

10

/4"

/"

1 2

0
20

40

60

80

100

120

140

160

DIFFERENTIAL STEAM PRESSURE

22

180

200

220

240

260

Air Accessories

Control Panels & Air Loaders


Armstrong Control Panels and Air
Loaders are designed to provide
the necessary air loading signal to
control any air-operated pressure
reducing valve. While designed
specifically to control Armstrong
pressure reducing valves such as
the GP-2000K1 & 2, GD-2000K,
GP-100, GP-33 and GP-34, these
panels can remotely control other
air-loaded valves.

Panel is of rigid lightweight


anodized aluminum for easy
handling and installation.
Control panel comes fully
assembled with gauges suited
to applications. Panel mate
and panel mate filter are
standard on panels and are
also available separately.

Table 23-1. SpecificationsControl Panel


STANDARD PRESSURE GAUGE RANGES
Gauge

Panel A

Panel Y

A psig (bar)

0-100 (0-7)

B psig (bar)

0-100 (0-7)

0-100 (0-7)

C psig (bar)

0-200 (0-14)
0-30, 0-100, 0-300
(0-2, 0-7, 0-20.5)

0-200 (0-14)

Optional: Gauge A Ranges - psig (bar)

0-30, 0-60, 0-100, 0-150, 0-200, 0-300


(0-2, 0-4, 0-7, 0-10.5, 0-14, 0-20.5)
200 (14)

Optional: Gauge B and C Ranges - psig (bar)


Maximum Inlet Air Pressure - psig (bar)

150 (10.5)

Maximum Outlet Air Pressure - psig (bar)

Table 23-2. Materials of ConstructionPanel MateFilter


Name of Part
Panel Mate
Filter
Zinc
Body

Bottom plug
Brass
Nitrile

Pilot valve

Nitrile
Stainless steel

Main valve

Polycarbonate

Teflon

Zinc

Porous polypropylene

Nitrile, neoprene and


polyurethane

Nitrile and
neoprene

Pilot diaphragm
Main diaphragm

Main valve seat


Bowl
Element
Elastomers

71/4" (184)
CONTROL
PANEL

1/4 NPT
A
PANEL

Panel
Mounting Hole
0.47 (12)
Diameter
Maximum
Panel
Thickness:
0.094 (2.4)

111/2"
(292)

41/2"
(116)
21/2"
(64)

AIR LOADING PRESSURE

AIR SUPPLY PRESSURE

R
ARMSTRONG

1/2"
(13)

STEAM / AIR / LIQUID PRODUCTS


Three Rivers , Michigan 49093

61/2" (165)

21/8" (54)

13/4" (44)
1/4" NPT

NOTE: Panel material is anodized aluminum.

CONTROL

Table 23-3. SpecificationsPanel MateFilter


*Panel Mate
Inlet pressure maximum
200 (14)
psig (bar)

(6)

71/4" (184)
PANEL

AIR LOADING PRESSURE

Filter

AIR SUPPLY PRESSURE

61/2"
(165)

4"
(102)

R
ARMSTRONG
STEAM / AIR / LIQUID PRODUCTS

250 (17)

Three Rivers , Michigan 49093

61/2" (165)

Outlet pressure maximum


psig (bar)

150 (10)

Temperature maximum
F (C)

160 (71)

175 (79)

*NOTE: Use an Armstrong AF-10, 5 micron air filter upstream of panel mate to prevent fouling.

23

OBK-2000
Pneumatic Temperature Pilot
A compact pneumatic temperature
pilot with broad temperature ranges,
the OBK-2000 can be remotely
located away from the regulator
valve, an advantage not available
with a conventional capillary system.

changes. Brass, stainless steel


bulbs and separate wells are
available.
Reverse-Acting Operation
For Heating
During operation, a temperature
change in the medium being
controlled creates a change
in the length of the sensitivity
tube. An increase in temperature lengthens the sensitivity
tube (1) and moves the invar
rod (2) from the lever (3).
The lever pivots at point B
and is moved so the exhaust
valve (4) is opened by the
spring at (D). This lever action
decreases the supply air at
point (S) in the control line
at point (R) and closes the
regulator valve. A decrease

Typical applications include instantaneous or storage tank water


heaters, air make-up units and
manufacturing process operations
such as parts washing, die casting
and plastic molding.
Capable of reverse or direct-acting
operation, the OBK-2000 features
a simple design with fewer moving
parts for trouble-free operation.
Other features include supply and
control pressure gauges, a rugged
cast brass housing, and precise and
rapid response to temperature

Operation Reverse Acting For Heating


GP-2000-K
Regulator Valve
(Normally Closed)
A
2

0.5 (0.3)

Mounting - in (mm)

1/2

(15)

Air connections - in (mm)

1/8

(3)

Shipping weight - lb (kg)

4 (1.8)

Sensitivity (adjustable) - psi (bar)

1/4

Maximum pressure on wells


Stainless steel - psi (bar)
Copper - psi (bar)

1125 (79)
525 (36)

Positions A and C show pivot point A and


spring C when controller is direct acting.

The sensitivity adjustment screw


at point (6) regulates the rate
of flow of the supply air to the
controller to a change in temperature. Turning the screw
clockwise increases the sensitivity by reducing the flow and
increasing the response time.
Turning the screw counterclockwise decreases the sensitivity
by increasing flow and reducing
the response time. Valve
closes on air failure, making
it fail-safe.

to 21/4 (0.02 to 0.16)

Table 24-2. OBK-2000 Materials


Name of Part
Material
O-rings

D
6

400 (204)

Temperature response -F (C)

Body

Brass
Silicone Rubber/Buna N

Valve

Phos. Bronze

Valve Seat

Phos. Bronze

2-7/8"
73 mm

NOTE: Thermal wells available. 304 stainless steel


or brass are standard materials. Other materials
available upon request.

2-1/4" 1-5/8"
57 mm 41 mm

3-5/8"
92 mm

7"
178 mm

12"
304 mm

12-5/8"
320 mm

2-3/8"
61 mm

OBK-2000

24

Table 24-1. OBK-2000 Specifications


Dial adjustment range -F (C)
Standard - 50 to 350 (10 to 177)
Maximum supply pressure (air)
25 (2)
@ room temperature - psi (bar)
Air consumption (maximum) - SCIM (cm/s) 800 (218-3)
250 (17)
Maximum operating pressure - psi (bar)
Maximum operating temperature -F (C)

in temperature shortens the


sensitivity tube at point (1) and
moves the invar rod against the
lever point (3). The lever at this
point moves against the spring
at point (D) to close the exhaust
valve at point (4). This lever
action increases the pressure
in the control line at point (R)
and opens the valve.

All dimensions and weights are approximate. Use certified print for exact dimensions.

1/2"
15 mm

GP-2000R
For Steam Back Pressure Regulation
The GP-2000R is a high performance
externally piloted throttling back
pressure valve for large capacity
applications. Typical applications

would include those systems utilizing flash steam for low pressure
heating or processes. The GP-2000R
valves will function to maintain a

constant upstream pressure.


This valve is not a safety valve
and should not be used for
that purpose.

Table 25-1. GP-2000R Specifications


Application

Inlet
Pressure
(psig)

Relieving
Pressure
(psig)

Steam

NPT
3-200
*150 lb Flg
3-185
*300 lb Flg
3-200

3-30 (Yellow)
20-100 (Red)
80-200 (Black)

Maximum
Temperature
(F)

Minimum
Differential
(psig)

450

Body
Ductile
Iron
ASTM
A536

MATERIALS
Pilot
Valve/Seat Diaphragm

Main
Valve/Seat

Stainless
Steel
AISI 301

Stainless Steel
AISI 420

Color

Dark
Gray

*6" valve standard in remote mount with 125 or 250 lb. ANSI flanges.

Table 25-2. GP-2000R Dimensions and Weights

For Capacities, see page 26

/"

NPT
5 15/16

150#

300#

7 15 16

6 15 16

H
Integral
(in)
17 3/8

NPT
34

34

/"

5 15/16

7 15/16

6 15/16

17 3/8

15 3/4

6 3/4

34

7.2

1"

615/16

8 15/16

7 1/8

17 3/4

15 15/16

6 15/16

44

10.9

11/4"

7 1/8

8 15/16

7 1/8

18 7/8

16 5/8

7 5/8

51

14.3

11 2

/"

71 8

8 15 16

71 8

18 7 8

16 5 8

75 8

51

18.8

2"

9 1/8

8 5/8

9 1/8

10 15/16

7 3/4

213/8

17 1/2

8 1/2

75

81

84

32

21 2

10 15 16

111 2

13 13 16

8 5 16

23 7 8

18 13 16

9 13 16

142

150

60

3"

113/4

12 7/16

13 13/16

8 3/4

23 7/8

19 7/16

10 7/16

155

166

78

4"
*6"

13 1/2
18 1/2

141/8

15 13/16

9 7/16

28 3/8

247

19 3/4

111/8

12 5/8
16

19

21 5/8
25

510

264
550

120
223

Size
12

/"

Face-to-Face (in)

F
(in)

A
(in)

H
Remote
(in)
15 3/4

634

150#

300#

H1
(in)

Weight (lbs)
Cv
5

*6" valve standard in remote mount with 125 or 250 lb. ANSI flanges.

1/4 NPT

9"

9"

H
H

L
H1

H1

H1

H1

A
1/4 NPT

1/4 NPT

GP-2000R

All dimensions and weights are approximate. Use certified print for exact dimensions.

25

GP-2000, 2000K-1, 2000K-2, GD-2000K, GP-2000R, GP-11S


Capacities for Steam
Table 26-1. GP-2000, 2000K-1, 2000K-2, GD-2000K, GP-2000R, GP-11S CapacitiesSteam (lbs/hr)
12

/"

34

1"

11/4"

Connection Size
11/2"
2"

21/2"

3"

4"

8
3
13
10
3
18
3-5

201
250
219
255
313
236
362

298
360
316
368
451
340
522

438
545
478
557
683
515
790

575
716
627
731
896
676
1,037

756
941
825
962
1,178
888
1,363

1,287
1,602
1,404
1,637
2,005
1,512
2,320

2,413
3,005
2,633
3,070
3,760
2,836
4,351

3,137
3,906
3,423
3,992
4,888
3,687
5,657

4,826
6,010
5,266
6,141
7,521
5,673
8,703

23
3-7
33
25
3-12

252
408
281
395
499

363
587
404
568
719

549
898
612
861
1,089

721
1,167
803
1,130
1,429

948
1,535
1,056
1,485
1,878

1,613
2,613
1,799
2,528
3,197

3,026
4,899
3,373
4,741
5,996

3,933
6,369
4,335
6,163
7,795

6,052
9,799
6,746
9,482
11,992

42
30
3-17
51
45
35
3-22

327
491
591

471
707
851

713
1,070
1,288

935
1,404
1,699

1,230
1,846
2,222

2,084
3,143
3,782

3,926
5,893
7,092

5,164
7,661
9,220

7,853
11,787
14,184

373
471
585
682

537
678
843
982

813
1,027
1,276
1,487

1,067
1,348
1,674
1,951

1,403
1,772
2,201
2,565

2,388
3,017
3,747
4,367

4,478
5,657
7,026
8,188

5,822
7,354
9,134
10,645

8,957
11,314
14,053
16,377

75

63
55
45
4-30

470
592
702
819

677
853
1,012
1,179

1,025
1,292
1,532
1,785

1,345
1,695
2,010
2,343

1,769
2,229
2,643
3,030

3,011
3,794
4,498
5,244

5,647
7,114
8,435
9,832

7,341
9,248
10,966
12,782

11,294
14,228
16,870
19,565

100

85
75
60
5-42

595
750
913
1,047

857
1,080
1,316
1,508

1,298
1,636
1,992
2,284

1,702
2,146
2,613
2,996

2,238
2,822
3,436
3,939

3,810
4,803
5,849
6,705

7,145
9,007
10,967
12,573

9,289
11,709
14,257
16,345

14,290
18,014
21,934
25,146

125

106
100
75
7-55

738
837
1,124
1,276

1,063
1,205
1,619
1,837

1,610
1,825
2,451
2,782

2,112
2,394
3,216
3,649

2,776
3,148
4,228
4,798

4,726
5,359
7,196
8,167

8,862
10,048
13,494
15,313

11,521
13,062
17,542
19,908

17,725
20,096
26,988
30,627

150

127
100
8-67

881
1,241
1,504

1,269
1,787
2,166

1,921
2,705
3,279

2,520
3,549
4,302

3,314
4,666
5,657

5,641
7,942
9,628

10,577
14,892
18,054

13,750
19,360
23,470

21,154
29,785
36,108

175

148
125
100
9-80

1,024
1,347
1,586
1,732

1,474
1,940
2,284
2,495

2,232
2,937
3,458
3,777

2,929
3,853
4,537
4,956

3,851
5,066
5,965
6,515

6,554
8,624
10,153
11,090

12,290
16,170
19,038
20,794

15,977
21,021
24,749
27,033

24,581
32,340
38,076
41,589

200

170
150
125
10-92

1,149
1,446
1,711
1,961

1,655
2,082
2,465
2,824

2,505
3,152
3,731
4,275

3,287
4,136
4,895
5,609

4,321
5,437
6,436
7,374

7,355
9,255
10,955
12,552

13,792
17,354
20,542
23,535

17,929
22,560
26,704
30,595

27,584
34,708
41,084
47,070

225

191
175
150
12-105

1,292
1,538
1,828
2,189

1,860
2,215
2,633
3,153

2,816
3,353
3,986
4,773

3,695
4,400
5,229
6,262

4,858
5,784
6,875
8,233

8,269
9,846
11,703
14,013

15,050
18,462
21,943
26,275

20,157
24,001
28,526
34,158

31,010
36,924
43,887
52,551

250

200
175
150
13-117

1,625
1,938
2,175
2,418

2,340
2,791
3,133
3,481

3,543
4,225
4,743
5,271

4,649
5,543
6,222
6,915

6,112
7,288
8,181
9,091

10,404
12,405
13,925
15,475

19,507
23,260
26,109
29,016

25,359
30,238
33,942
37,721

39,015
46,521
52,219
58,032

300

200
175
150
15-142

2,416
2,570
2,816
2,863

3,479
3,797
4,055
4,123

15,462
16,874
18,020
18,328

350

3,824
4,154
4,455
4,797

9,984
10,848
11,634
12,526

16,998
18,464
19,804
21,321

28,991
31,638
33,788
34,365

37,688
41,130
43,925
44,674

57,982
63,276
67,576
68,730

2,655
2,885
3,094
3,331

6,910
7,540
8,052
8,190
7,437
8,251
8,849
9,528

9,084
9,913
10,587
10,767

248
225
200
18-160

5,267
5,748
6,138
6,243
5,788
6,289
6,745
7,262

425

248
225
22-195

3,701
3,869
4,016

5,329
5,572
5,783

8,068
8,435
8,756

11,487
10,585
11,066

13,916
14,548
15,102

23,687
24,763
25,706

Outlet
(psig)

15
20
25
30
40

50

GP-11S ONLY

60

/"

NOTE: Maximum pressure reduction ratio 20:1, except for GD-2000K (10:1).

26

Minimum pressure reduction is 85% of inlet pressure.

6"

Upon application only consult factory

Inlet
(psig)

External Pilot Solenoid Operated Valves


The GP-2000 On/Off option allows for
remote shutoff of pressure reducing
valves. Automatic shutoff during
power failures and shutoff based on
set points of pressure, temperature
or liquid levels of process fluids.

This option is available as an


accessory item or may be factory
installed on any of the GP-2000
series valves. The GP-2000 On/Off
is designed for a maximum pressure of 150 psig and a maximum

temperature of 366F NEMA


IV standard, coil: class H 110v
standard. Available in normally
open or normally closed
configurations.

GP-2000, GP-11S, GP-2000R

Externally Piloted

GP-2000 ON/OFF - For Steam Service

GP-2000K 1&2

GP-2000 Remote Mount

27

Temperature Regulators
For Steam, Water, and Non-Corrosive Liquid Service
Armstrong self-actuated externally
piloted temperature regulators are
compact, high performance units
that are simple in design and

Color coded handles


(red for heating and
blue for cooling) make
for easy identification in
the field.

Easy no-tools
temperature adjustment
with a simple turn of
the handle.

Cast bronze body


permits liquid service
to 250 psi and steam
service to 150 psi.

Main valve seat materials


are stainless steel and
Teflon for high durability
and positive sealing.

Quick installation and


removal of sensor from
main body means easy
temperature range
changes.

28

operationand suitable for a wide


variety of applications. Features
including flexible mounting positions
of the sensor, interchangeable

capillaries and varied temperature


ranges make installation, adjustment and maintenance quick and
easy.

Sensor temperature
endurance+72F of the
maximum value of the
temperature regulation
range. Gas-charged
capillary eliminates chance
of cappilary charge mixing
with process in case of
breakage. Sensor can be
mounted in any position.

Sensors are standard for


both heating and cooling
for all sizes (1/2"-1").
Standard capillary units
for heating or cooling are
accurate to within7F.

A single valve with


bellows and balancing
mechanism ensures
stable regulation. Not
affected by pressure
fluctuation.
Braided stainless steel
capillary protects
against crimping.

For Steam, Air, and Non-Corrosive Liquids


Armstrongs OB-30/31 is a direct
acting temperature regulator which
requires no external source for
operation. Simple and compact, the
unit is suitable for a wide variety of
heating/cooling applications.

Installing, adjusting or maintaining


the OB-30/31 is quick and easy
because interchangeable capillaries
mount in any position and disconnect by simply loosening the
union nut. No stem packing so

theres no leakage. Single


composition seat for tight shutoff.
The OB-30/31 comes in 1/2", 3/4"
or 1" sizes and is available with a
choice of five temperature ranges
and three capillary lengths.

Table 29-1. OB-30/31 Specifications


Model

Application

Service

Max. Inlet
Pressure (psig)

OB-30

Heating

Steam

Steam
150

OB-31

Cooling

Water,
Non-Corrosive
Liquids

Liquid
250

Maximum
Diff. (psig)

140

Temperature
Ranges (F)

Maximum
Temp. (F)

Temperature
Accuracy

Capillary
Lengths (ft)

365

+7 F
From
Set Point

*61/2
9 3/4
161/2

32 - 95
77 - 158
104 - 212
140 - 266
158 - 302

* Standard length.
NOTES: Capillary can withstand a maximum of 72F above rated range. If desired set temperature is in temperature range overlap, select lower range.

Temperature Regulators

OB-30/31

Table 29-2. OB 30/31 Materials


Body
Material

Seat Type
& Material

Valve
Material

Capillary
Material

Bulb
Material

Thermal Well
Material

Bronze
ASTM B584

Single Seat
304 Stainless Steel

Teflon

304 Stainless Steel


Armor Shielded Capillary

Copper-Nickel
Plated

*304 Stainless
Steel or Brass

* Other materials available upon request.

Table 29-3. OB-30/31 Dimensions and Weights


Size

/"
/"

12
34

1"

L
(in)

H1
(in)

H
(in)

T
(in)

3
31/8
31/2

51 8

121 2

51/8
51/8

121/2
121/2

/
/
3/8

K
(in)

R
(in)

38

38

8
8

/
/
1/2

12

12

Weight
(lbs)
6
6
61/2

Cv
3.7
4.6
5.8

0
1
2
3
4

L
H

H
R

H1

All dimensions and weights are approximate. Use certified print for exact dimensions.

29

OB-30/31
For Steam, Air, and Non-Corrosive Liquids
Table 30-1. OB-30 CapacitiesSteam (lbs/hr)
Inlet Outlet
(psig) (psig)

15

20

25

30

40

50

/"

/"

34

3.7
67
81
101
75

4.6
83
100
126
94

1"
5.8
105
127
159
118

104

130

164

125

155

196

154

191

241

12

101

125

158

139

172

218

165

205

259

0-5

200

249

314

15

139

173

218

10

181

235

296

221

275

347

0-2

234

290

367

20

149

186

234

15

204

254

320

10

241

300

378

0-5

268

333

420

25

159

198

250

CV Factors
3
2
5
0
8
10

Connection Sizes
12

15

258

322

406

0-7

302

375

473

30

244

304

384

20

328

408

515

0-12

369

459

579

40

268

333

420

30

383

451

569

0-17

437

543

685

Inlet Outlet
(psig) (psig)

Connection Sizes

Temperature Regulator Selection Example

/"

Parameters:

12

3.7
CV Factors
290
50
60
395
40
0-22 504
310
60
328
50
70
502
40
0-27 572
329
70
452
60
80
537
50
0-32 640
346
80
478
70
90
570
60
639
50
0-37 707
363
90
502
80
600
70
100
676
60
0-42 776
489
110
619
100
798
80
125
863
70
0-55 944
611
130
736
120
150
918
100
0-63 1,113

/"

34

4.6
360
491
627
385
424
624
711
409
562
668
795
431
694
708
795
879
452
625
747
840
963
608
770
992
1,073
1,174
759
915
1,141
1,384

1"
5.8
454
619
791
486
665
787
897
616
708
842
1,003
543
749
893
1,002
1,109
570
788
942
1,060
1,215
767
971
1,250
1,353
1,480
958
1,154
1,439
1,745

NOTE: Where it is not possible to calculate pressure drop, 35%-40% of gauge


supply pressure can be used as a reasonable approximation.

Fluid
Maximum inlet pressure
Outlet pressure
Maximum flow rate
Temperature required
Distance from regulator to sensing point

Steam
100 psi
90 psi
500 lbs/hr
150F
5 feet

To Locate Proper Model:


Enter inlet column (Table 30-1) at
100 psi
Move to outlet pressure of
90 psi
Locate capacity of 570 lbs/hr under 1" connection size
Find capillary temp. range (Table 30-3)
77-158F
Select capillary length (Table 29-1)
6 1/2 feet

Application Will Require:


OB-30, 1" with 77-158F Temp. Range,
Capillary Length 6 1/2 Feet

Table 30-2.
OB-30/31 Capacities-Water (GPM)
P
(psig)

1 2"

3 4"

1"

5
10
15
20
25
30
50
75
100
125
150

8.1
11.9
14.3
16.7
18.5
20.3
26.4
32.6
37.9
42.2
46.3

10.1
14.3
17.6
20.7
22.0
25.6
33.5
39.6
46.2
52.0
57.25

12.3
18.5
22.0
26.4
28.2
31.7
41.4
49.3
57.2
65.6
70.5

Table 30-3.
Capillary Temp. Ranges
Temperature Ranges F
32 - 95
77 - 158
104 - 212
140 - 266
158 - 302
NOTE: If desired set temperature is
in temperature range overlap, select
lower range.

OB-30/31, OBK-2000 and OB-2000/2000PT Thermal Well


Table 30-4. Thermal Well Dimensions
A

C
D

Model

A
(in)

B
(in)

C
(in)

D
(in)

E
(in)

F
(in)

G
(in)

H
(in)

OB-30/31

34

71/2

14

.765

34

12

.380

OB-2000/
2000PT

34

73/4

14

.89

34

.630

OBK-2000

34

121/2

14

.765

34

12

.515

Standard Material: 304 Stainless Steel or Brass. Other materials available upon request.
NOTE: When inserting sensor into thermal well, for best results, it is recommended
that heat transfer medium be applied to sensor before installation.

30

All dimensions and weights are approximate. Use certified print for exact dimensions.

For Steam
Armstrongs OB-2000 is a high
performance externally piloted
temperature regulator for large
capacity applications such as heat
exchangers, steam coils, steam
dryers, plating tanks and parts

washers. Self-actuated and requiring no external energy source, the


OB-2000 comes with pilot valve
and tubing pre-assembled. Capillary units mount in any position and
can be easily disconnected and

interchanged, offering easy


installation and maximum application flexibility. Available in
sizes 1/2" through 4" with six
temperature ranges and three
capillary lengths.

Table 31-1. OB-2000 Specifications


Inlet
Pressure
(psig)

Application

Minimum
Differential
Pressure (psig)

NPT
10-300
150 lb Flg
10 - 185
300 lb Flg
10 - 300

Steam

Temperature
Ranges (F)

Temperature
Accuracy

18 - 59
50 - 97
86 - 144
131 - 201
176 - 260
239 - 361

+2F From
Set Point

Capillary
Lengths (ft)

* 6 1/2
9 1/2
16 1/2

Temperature Regulators

OB-2000

*Standard length.

NOTE: If desired set temperature is in temperature range overlap, select lower range.

Table 31-2. OB-2000 Dimensions and Weights


Size

/
3/4"

1 2"

1"
11/4"
11/2"

2"

21 2"

3"
4"

NPT
57/8
5 7/8
61/4
71/8
71/8
9

Face-to-Face (in)
150#
300#

81/2
91/8
7
111/2
10 /8
3
121/2
11 /4
1
13 /2
141/8

H1
(in)
63/4
63/4
7
75/8
75/8
85/8

/
/
13 5/8
101 2

111 8

H2
(in)
215/16
215/16
31/16
3 9/16
3 9/16
41/16
47/8
53/8
6 9/16

A
(in)

F
(in)

G
(in)

77/8
77/8
87/8
87/8
87/8
107/8
107/8
137/8
157/8

65/8
65/8
67/8
71/8
71/8
71/16
81/8
89/16
91/4

83/4
8 3/4
87/8
91/4
91/4
91/2

101/8
105/8
111/4

NPT
31
31
39
47
47
71

Weight (lbs)
150#

77
138
149
234

300#

78
140
155
243

Cv
5.0
7.2
10.9
14.3
18.8
32
60
78
120

NOTE: For 6" consult factory.

G
F

41 2"
H2

41 2"
H1
21 2"

A
5 8"

3/4 NPT
10 1 2"

OB-2000

All dimensions and weights are approximate. Use certified print for exact dimensions.

31

OB-2000
For Steam
Table 32-1. OB-2000 Sensor and Accessories Specifications
Capillary
Material
Copper Capillary
Tube With
304 Stainless Steel
Armor Shield

Capillary
Temperature
Ranges (F)

Bulb
Material

18 - 59
50 - 97
86 - 144
131 - 201
176 - 260
239 - 361

Nickel Plated
Copper Bulb

Bulb
Connection

Thermal Well
Material

Thermal Well
Connection

/ " NPT

* Brass
* 304 Stainless Steel

1" NPT

34

* Standard. Other material available upon request. See page 30 (Table 30-4) for dimensional information.
NOTE: Capillary can withstand a maximum of 36F above rated range.
NOTE: If desired set temperature is in temperature range overlap, select lower range.

Table 32-2. OB-2000 Materials


OB-2000
Main
Valve
Temperature
Pilot Valve

Body
Material
Ductile Iron
ASTM A536
Bronze
ASTM
B584

Seat Type
& Material

Single Seat
Stainless Steel
AISI 420

Table 32-3. Valve Sizing


Proper valve selection requires the following information
Steam capacity required for application
Supply pressure of steam
Allowable pressure drop across valve*
* Where it is not possible to calculate pressure drop, 35% - 40% of gauge
supply pressure can be used as a reasonable approximation.

Valve
Material
Stainless
Steel
AISI 420

Connection
NPT
150 lb Flg
300 lb Flg

Maximum
Temperature (F)

450

/ NPT

1 4"

Temperature Regulator Selection Example


Parameters:
Fluid
Maximum inlet pressure
Outlet pressure
Maximum flow rate
Temperature required
Distance from regulator to sensing point

Steam
100 psi
75 psi
1500 lbs/hr
180F
5 feet

To Locate Proper Model:


Enter inlet column (Table 34-1) at
100 psi
Move to outlet pressure of
75 psi
Locate capacity of 1500 lbs/hr under 1" connection size
Find capillary temp. range (Table 32-1)
131-201F
Select capillary length (Table 31-1)
6 1/2 feet

Application Will Require:


OB-2000, 1" with 131-201F Temp. Range,
Capillary Length 6 1/2 Feet

32

For Steam Service


The OB-2000PT is a diaphragmoperated externally piloted pressure/
temperature combination regulator.
It is used in applications where
maximum pressure should be limited

and the temperature of the heated


medium is controlled using a single
seated main valve. Temperature
pilot and capillary unit disconnect,
making repairs or temperature

range changes quick and easy.


Available in sizes 1/2" through 4"
and with a choice of four spring
ranges, six temperature ranges
and three capillary lengths.

Table 33-1. OB-2000PT Specifications


Minimum
Differential
Pressure (psig)

Inlet
Pressure
(psig)

Application

NPT
15-300

Temperature
Ranges (F)

1.5 - 3 Silver

18 - 59
50 - 97
86 - 144
131 - 201
176 - 260
239 - 361

3 - 30 Yellow

150 lb Flg
15 - 185

Steam

Reduced
Pressure (psig)
& Spring Color

20 -100 Red

300 lb Flg
15 - 300

80 - 200 Black

Temperature Capillary
Accuracy
Lengths (ft)

2F
From
Set Point

*61/2

91/4
161/2

Temperature Regulators

OB-2000PT

* Standard length.

Table 33-2. OB-2000PT Sensor and Accessories Specifications


Capillary
Material
Copper Capillary
Tube With
304 Stainless
Steel
Armor Shield

Capillary
Temp. (F)
Ranges

Bulb
Material

18 - 59
50 - 97
86 - 144
131 - 201
176 - 260
239 - 361

Nickel Plated
Copper Bulb

Bulb
Connection

Thermal
Well
Connection

Thermal Well
Material

* Brass
* 304 Stainless Steel

/ " NPT

34

1" NPT

* Standard. Other material available upon request. See page 30 (Table 30-4) for additional
dimensional information.
NOTES: Capillary can withstand a maximum of 36F above rated range.
If desired set temperature is in temperature range overlap, select lower range.

OB-2000PT

Table 33-3. OB-2000PT Materials


OB-2000

Body
Material

Main Valve

Ductile Iron
ASTM A536

Temperature
Pilot Valve

Bronze
ASTM B584

Pressure Pilot

Ductile Iron
ASTM A536

Stainless
Steel
AISI 420

/"

78

5/

1"
11/4"
11/2"

61/4

71/8
71/8

187/8

75/8

87/8

91/8

187/8

75/8

111/2
121/2
141/8

3"
4"

113/4

131/2

7.2

615/16

38

34

78

H1

Cv
5.0

47

81/2
107/8

61/2

Weight (lbs)
NPT 150# 300#
47

61/2
7

6/

G
(in)

7/
87/8

17 /
173/4

2"
21/2"

450
H

Table 33-4. OB-2000PT Dimensions and Weights


Face-to-Face (in)
H1
H
A
Size NPT 150# 300#
(in)
(in)
(in)
1/2"
173/8
77/8
57/8
63/4

34

Maximum
Temperature (F)

Valve & Seat Material

57

10.9

71/4

67

14.3

87/8

71/4

67

18.8

10 /

61/2

100

32

137/8

6/

89

94

237/8

81/2
913/16

158

167

60

237/8
28 3/8

107/16
125/8

137/8
157/8

61/2
61/2

171
263

183
281

78
120

21 /

38

78

12

A
3/4 NPT
101 2 "

NOTE: For 6" consult factory.

All dimensions and weights are approximate. Use certified print for exact dimensions.

33

OB-2000, OB-2000PT
Capacities for Steam Service
Table 34-1. OB-2000, OB-2000PT CapacitiesSteam (lbs/hr)
Connection Size
Inlet
(psig)

Outlet
(psig)

12

34

/"

1"

11/4"

11/2"

2"

21/2"

3"

4"

10*

0-3

211

304

460

604

794

1,351

2,534

3,294

5,068

13
10
0

219
255
313

316
368
451

478
557
683

627
731
896

825
962
1,178

1,404
1,637
2,005

2,633
3,070
3,760

3,423
3,992
4,888

5,266
6,141
7,521

18
0-5

236
362

340
522

515
790

676
1,037

888
1,363

1,512
2,320

2,836
4,351

3,687
5,657

5,673
8,703

30

23
0-7

252
408

363
587

549
898

721
1,167

948
1,535

1,613
2,613

3,026
4,899

3,933
6,369

6,052
9,799

40

33
25
0-12

281
395
499

404
568
719

612
861
1,089

803
1,130
1,429

1,056
1,485
1,878

1,799
2,528
3,197

3,373
4,741
5,996

4,335
6,163
7,795

6,746
9,482
11,992

50

42
30
0-17

327
491
591

471
707
851

713
1,070
1,288

935
1,404
1,699

1,230
1,846
2,222

2,084
3,143
3,782

3,926
5,893
7,092

5,164
7,661
9,220

7,853
11,787
14,184

60

51
45
35
0-22

373
471
585
682

537
678
843
982

813
1,027
1,276
1,487

1,067
1,348
1,674
1,951

1,403
1,772
2,201
2,565

2,388
3,017
3,747
4,367

4,478
5,657
7,026
8,188

5,822
7,354
9,134
10,645

8,957
11,314
14,053
16,377

75

63
55
45
0-30

470
592
702
819

677
853
1,012
1,179

1,025
1,292
1,532
1,785

1,345
1,695
2,010
2,343

1,769
2,229
2,643
3,030

3,011
3,794
4,498
5,244

5,647
7,114
8,435
9,832

7,341
9,248
10,966
12,782

11,294
14,228
16,870
19,565

100

85
75
60
0-42

595
750
913
1,047

857
1,080
1,316
1,508

1,298
1,636
1,992
2,284

1,702
2,146
2,613
2,996

2,238
2,822
3,436
3,939

3,810
4,803
5,849
6,705

7,145
9,007
10,967
12,573

9,289
11,709
14,257
16,345

14,290
18,014
21,934
25,146

125

106
100
75
0-55

738
837
1,124
1,276

1,063
1,205
1,619
1,837

1,610
1,825
2,451
2,782

2,112
2,394
3,216
3,649

2,776
3,148
4,228
4,798

4,726
5,359
7,196
8,167

8,862
10,048
13,494
15,313

11,521
13,062
17,542
19,908

17,725
20,096
26,988
30,627

150

127
100
0-67

881
1,241
1,504

1,269
1,787
2,166

1,921
2,705
3,279

2,520
3,549
4,302

3,314
4,666
5,657

5,641
7,942
9,628

10,577
14,892
18,054

13,750
19,360
23,470

21,154
29,785
36,108

175

148
125
100
0-80

1,024
1,347
1,586
1,732

1,474
1,940
2,284
2,495

2,232
2,937
3,458
3,777

2,929
3,853
4,537
4,956

3,851
5,066
5,965
6,515

6,554
8,624
10,153
11,090

12,290
16,170
19,038
20,794

15,977
21,021
24,749
27,033

24,581
32,340
38,076
41,589

200

170
150
125
0-92

1,149
1,446
1,711
1,961

1,655
2,082
2,465
2,824

2,505
3,152
3,731
4,275

3,287
4,136
4,895
5,609

4,321
5,437
6,436
7,374

7,355
9,255
10,955
12,552

13,792
17,354
20,542
23,535

17,929
22,560
26,704
30,595

27,584
34,708
41,084
47,070

225

191
175
150
0-105

1,292
1,538
1,828
2,189

1,860
2,215
2,633
3,153

2,816
3,353
3,986
4,773

3,695
4,400
5,229
6,262

4,858
5,784
6,875
8,233

8,269
9,846
11,703
14,013

15,505
18,462
21,943
26,275

20,157
24,001
28,526
34,158

31,010
36,924
43,887
52,551

250

200
175
150
0-117

1,625
1,938
2,175
2,418

2,340
2,791
3,133
3,481

3,543
4,225
4,743
5,271

4,649
5,543
6,222
6,915

6,112
7,288
8,181
9,091

10,404
12,405
13,925
15,475

19,507
23,260
26,109
29,016

25,359
30,238
33,942
37,721

39,015
46,521
52,219
58,032

300

200
175
150
15-142

2,416
2,570
2,816
2,863

3,479
3,797
4,055
4,123

5,267
5,748
6,138
6,243

6,910
7,540
8,052
8,190

9,084
9,913
10,587
10,767

15,462
16,874
18,020
18,328

28,991
31,638
33,788
34,365

37,688
41,130
43,925
44,674

57,982
63,276
67,576
68,730

20

25

/"

* Minimum inlet pressure for OB-2000PT is 15 psi because of the pressure pilot. NOTE: For 6" consult factory.

34

For Steam Service

Points to Remember When Installing


Drain condensate at inlet of pressure/temperature
regulator with inverted bucket steam trap.

Install sensor so it is fully immersed in the fluid


being heated.

Protect temperature regulating valve from dirt and


scale by installing strainer with 100 mesh screen at
inlet of valve.

If temperature well is used, apply heat transfer


medium to sensor before insertion into well.
Place thermometer into system in close proximity
to temperature sensor for accurate valve
adjustment.

Install shutoff valves on either side of the regulating


valve along with a by-pass line for maintenance
purposes.

If possible, do not elevate condensate after steam


trap.

Install vacuum breaker after the outlet of equipment


and before the steam trap.

Determine pressure setting before temperature


setting (OB-2000PT only).

Temperature Regulators

OB-30, OB-2000, OB-2000PT

Figure 35-1. Typical InstallationOB-30, OB-2000


Hot Water
Outlet

Minimum of 10 Inlet
Pipe Diameters

T
OB-2000

Optional
Vacuum
Breaker

Armstrong
Strainer

Globe
Valve

Hot Water Tank

Cold Water
Inlet

By-Pass

Armstrong
Trap

Load Calculations

Where:

Heating oil with steam

GPM = Gallons per minute

GPM x T x 1.1
4
Heating water with steam

lb/hr steam =

lb/hr steam =

GPM x T x 1.1
2

Heating air with steam


CFM x T x 1.1
900
Jacketed kettles or tanks
lb/hr steam =

lb/hr steam =

= Temperature rise F

CFM = Cubic feet per minute


Cp

= Specific heat of liquids (Btu/lb -F)

= Time in hours

Lat

= Latent heat of steam (Btu/lb)

Gal

= Gallons of liquid to be heated

SG

= Specific gravity

1.1

= Safety factor

Gal x SG x Cp x T x 8.3
Lat x T

35

Application DataPressure Reducing Valves


Figure 36-1. Direct Acting Single Stage Reduction

Safety
Valve

Armstrong
Strainer

GD-30

By-Pass

Globe
Valve

Armstrong
Trap

Typical Direct Acting PRV Installation


Figure 36-2. External Pressure Pilot Single Stage Reduction
Minimum of 20
Outlet Pipe Diameters
to First Turn

Minimum 10 Inlet
Pipe Diameters

Control Pipe
(Pitch Down)

Safety
Valve

Gate
Valve

Armstrong
Strainer
GP-2000

By-Pass
Globe
Valve

Armstrong
Trap

Typical External Pressure Pilot PRV Installation.

36

Minimum of 10
Pipe Diameters
from Last Valve or Fitting

Application DataPressure Reducing Valves


Figure 37-1. External Pressure Pilot Two Stage Reduction

Minimum of 10 Outlet
Pipe Diameters from PRV #1

Minimum of 10
Pipe Diameters

Minimum of 20 Outlet
Pipe Diameters from PRV #2
Control Pipe
(Pitch Down)

Control Pipe
(Pitch Down)

Gate
Valve

Gate
Valve

Armstrong
Strainer
#1

#2

GP-2000
GP-2000
Globe
Valve
Minimum of 10 Outlet
Pipe Diameters
from Last Valve or Fitting

Armstrong
Trap

Typical External Pressure Pilot Two Stage Reduction. This system is recommended when pressure reduction
ratio exceeds capabilities of a single valve.
Figure 37-2. External Pressure Pilot One-Third to Two-Third Reduction Station
Control Pipe
(Pitch Down)
Gate
Valve

Armstrong
Strainer

By-Pass

GP-2000

Control Pipe
(Pitch Down)
Gate
Valve

Globe
Valve

Armstrong
Strainer
GP-2000

Armstrong
Trap

Armstrong
Trap

Typical External Pressure Pilot Parallel Reduction Station. When seasonal load swings vary widely, two valves
are commonly installed in parallel with the large valve being sized for two-thirds of the total load and the small
valve handling one-third of the total load. The small valves set point is set at a slightly higher pressure than the
large valve.

37

Application DataPressure Reducing Valves


Figure 38-1. Air Loaded External Pilot Single Stage Reduction
Minimum of 10 Inlet
Pipe Diameters

Minimum of 20 Outlet
Pipe Diameters to First Turn

Air Signal

Control Pipe
(Pitch Down)

Air In
Gate
Valve

Armstrong
Control Panel

Safety
Valve

Armstrong
Strainer
GP-2000K-1
By-Pass

Globe
Valve

Minimum of 10
Pipe Diameters
From Last Valve or Fitting

Armstrong
Trap

Typical Air Loaded External Pilot Reduction Station. Complete with remote located air loading control panel.
Figure 38-2. External Back Pressure Pilot Installation
Minimum of 10
Pipe Diameters
Control Pipe
(Pitch Down)
Gate
Valve
Armstrong
Strainer

To Vent

GP-2000R

From Low Pressure


Flash System

Typical External Pilot Back Pressure Installation. Used to maintain a constant upstream pressure
in the piping system.

38

Sizing Data
Selection Formulas

Formula Key

CV Value and Calculations

= Maximum flow capacity of steam, lbs/hr

P1

= Inlet pressure, psia (psig +14.7)

P2

= Outlet pressure, psia (psig + 14.7)

= Pressure drop (P1P2) psi

= Maximum flow capacity of gas SCFH

= Specific gravity

= Fluid temperature F

1. For Steam:
P
W
When P2 > 1 CV=
2
2.1 P (P1 +P2)
P
W
*When P2 1 CV=
2
1.71 (P )
1

GPM = Maximum flow capacity of liquid GPM

2. For Gas:
When P2 >

CV

P1
Q G (T+460)
CV=
2
963 P (P1 +P2 )

P
When P2 1 CV=
2

= Valve flow coefficient

* Formula applies only to piloted valves. With direct


acting valves at critical flow or sonic flow, capacities
diminish with greater differential pressure.

Q
36.39 (P1 )

3. For Liquid:
(GPM) G
P

CV=

Ordering Information
Table 39-1. Cv Values for Each Product
Model

mm
in

10

/"

38

12

/"

34

2.6

14

/"

15

20

25

32

/"

1"
5.8

11/4"
5.8

Connection Size
40
50
65
11/2"
5.8

2"
43

21/2"

80

100

125

150

200

250

3"

4"

5"

6"

8"

10"

GD-10

1.4

1.4

1.4

GD-10F

1.4

1.4

1.4

2.6

GD-6/6N

.35

.5

1.0

1.5

GD-20

36

68

75

108

1.5

1.9

16
10

28

GD-24

GD-30 & GD-50

1.3

1.5

2.5

7.2

10.9

14.3

8.5**
32

GP-2000 Series

5.6**
18.8

60

78

120

GP-100, GP-32
GP-18, GP-28, GP-1*

1.5
2.1

2.3
3.5

4
6.25

6.5
9.7

9
14

16
20.8

25
36

36
46

64
79.5

100
114

144
152

256
265

412

OB-30/OB-31

3.7

4.6

5.8

OB-2000/OB-2000PT

7.2

10.9

14.3

18.8

32

60

78

120

NOTE: *GP-1 only available to 6"


NOTE: **GD-30 only

Upon application only consult factory

When ordering please specify:


1. Model number
2. Connection size and type
3. Quantity
4. Service fluid
5. Specific gravity (if other than steam, air, water)
6. Fluid temperature
7. Maximum inlet pressure
8. Desired delivered pressure(reduced pressure)
9. Flow rate
10. Special conditions (if any)

39

076 METRIC TABLES 4.0

12/3/98

3:02 PM

Page 36

Metric Tables
Table M7-2. GD-30 and GD-50 CapacitiesSteam (kg/hr)
Inlet Outlet
(bar) (bar)
1.0

.5
.9
.5
1.6
1.0
.2
2.2
1.4
.3
2.8
1.4
.3
3.3
2.8
1.2
.4
4.4
3.7
1.6
.5
5.5
4.5
2.8
.7

1.4

2.0

2.8

3.4

4.0

5.5

6.9

15
22
24
19
28
24
15
45
36
18
59
45
22
62
68
41
25
80
85
55
27
92
102
90
31

Connection Size (mm)


20
25
40*
25
42
90
28
48
98
25
35
82
32
51
110
27
46
95
18
27
63
55
85
185
44
72
150
25
35
72
65
110
245
52
85
185
28
40
88
70
120
265
75
131
280
47
77
170
33
45
100
93
155
335
102
160
355
62
100
222
35
49
105
110
180
392
119
198
435
105
170
380
36
60
135

50*
135
150
120
185
140
98
280
235
120
380
285
135
408
440
265
150
530
545
340
165
615
665
580
215

Table M7-3. GD-30 Dimensions and Weights

Inlet Outlet
(bar) (bar)
6.6
4.8
3.1
.8
8.3
5.9
3.8
1.0
9.7
8.0
4.8
1.2
9.7
8.0
5.5
1.4
9.7
8.0
5.9
1.6
9.7
8.3
4.8
1.7

8.3

10.3

12.4

13.8

15.5

17.2

15
105
125
109
50
130
165
135
60
185
195
175
75
209
215
195
95
220
225
210
115
238
250
210
125

Connection Size (mm)


20
25
40*
125
205
450
141
235
530
121
204
445
55
90
210
151
250
550
191
320
695
160
270
580
75
115
255
220
360
780
230
390
830
195
335
735
85
140
310
235
395
900
245
410
910
225
375
825
110
175
385
260
430
935
265
436
940
245
410
900
135
225
490
275
460 1,010
265
471 1,020
240
405
880
145
240
520

50*
690
825
685
320
845
1,075
910
385
1,215
1,285
1,135
470
1,390
1,400
1,275
590
1,450
1,455
1,390
760
1,560
1,575
1,360
815

*Available GD-30 Only NOTE: For air capacities (m3/hr) multiply steam capacities by 1.34. Maximum pressure reduction ratio 10:1.

Symbol
L (mm)
H (mm)
H1 (mm)
Wt (kg)
Cv

15
80
191
47
1.9
1.3

Connection Size (mm)


20
25
40
85
95
140
191
191
307
47
47
77
1.9
2.0
10.1
1.5
2.5
5.6

50
150
307
77
10.4
8.5

Also available BSPT threads. Consult factory.

Table M8-3. GD-50 Dimensions and Weights


Symbol
L (mm)
H (mm)
H1 (mm)
Wt (kg)
Cv

Connection Size (mm)


15
20
109
109
206
206
46
46
3.0
3.0
1.3
1.5

25
109
206
46
3.2
2.5

Also available BSPT threads. Consult factory.

Table M9-3. GD-6N/GD-6 Dimensions and Weights


Symbol
L (mm)
H (mm)
H1 (mm)
E (mm)
Wt (kg)
Cv

10
165
237
57
155
5.5
.35

Connection Size (mm)


15
20
25
165
185
185
237
261
261
57
76
76
155
175
175
5.5
8.2
8.2
.5
1.0
1.5

Table M9-2. GD-6N CapacitiesSteam (kg/hr)


Inlet Outlet
(bar) (bar)
1.0
1.4

1.7

2.1

2.8

.2-.6
.9
.2-.7
1.2
1.0
.2-.8
1.6
1.4
.2-1
2.2
1.7
.3-1.4

10
8.2
5.4
9.5
6.4
8.6
10.9
7.3
9.5
12.2
9.5
12.7
15.0

Connection Size (mm)


15
20
11.3
23.1
7.7
15.4
13.6
26.8
9.1
18.6
12.7
24.9
15.4
30.8
10.4
21.3
13.6
26.8
17.2
34.5
13.6
27.2
18.1
35.8
21.3
42.6

25
34.5
23.1
40.4
27.7
37.6
46.3
32.2
40.4
52.2
40.8
54.0
63.5

Inlet Outlet
(bar) (bar)
3.4

4.1

5.2

6.9
8.6
10.3

2.8
2.2
.3-1.7
3.3
2.8
.4-2.1
4.1
3.3
.5-2.6
4.5
.7-3.4
.9-4.1
1-4.1

10
11.3
15.0
17.7
13.6
16.8
20.4
16.8
21.3
24.5
27.7
31.3
38.1
44.9

Connection Size (mm)


15
20
16.3
33.1
21.3
42.6
24.9
50.3
19.5
24.9
24.0
48.5
29.0
58.1
23.6
47.2
30.4
61.2
34.9
69.4
39.5
78.5
44.5
88.9
54.0
108.4
64.4
128.4

25
49.4
64.0
75.3
58.1
72.6
87.1
70.8
91.6
104.3
117.9
133.4
162.4
192.8

NOTE: For air capacities (m3/hr) multiply steam capacities by 1.34. Maximum pressure reduction ratio 10:1.

Table M9-4. GD-6 CapacitiesWater (l/min)


P
(bar)
.35
.7
1.0
1.7
3.5
5.2
6.9
8.6
10.0

Symbol
L (mm)
H (mm)
H1 (mm)
Wt (kg)
Cv

8
67
136
38
.7
1.4

Connection Size (mm)


10
15
20
67
67
98
136
136
149
38
38
38
.7
.7
.9
1.4
1.4
2.6

25
121
181
60
1.4
5.8

Table M10-3. GD-10F Dimensions and Weights


Symbol
L (mm)
H (mm)
H1 (mm)
Wt (kg)
Cv

8
70
238
146
1.2
1.4

Connection Size (mm)


10
15
20
70
70
98
238
238
276
146
146
162
1.2
2.0
2.0
1.4
1.4
2.6

Connection Size (mm)


15
20
4.2
8.3
6.0
12.1
7.2
14.8
9.5
18.9
13.2
26.9
16.3
32.9
18.9
37.9
21.2
42.4
23.1
45.8

25
12.9
17.8
22.0
28.4
40.1
49.2
56.8
63.6
68.9

Table M10-4. AF-10 Dimensions and Weights


Symbol

Table M10-2. GD-10 Dimensions and Weights

10
3.0
4.2
5.3
6.8
9.5
11.4
13.2
14.8
15.9

L (mm)
H (mm)
H1 (mm)
Wt (kg)

8
70
162
146
.9

Connection Size (mm)


10
15
20
70
70
98
162
162
178
146
146
162
.9
.9
.9

25
121
289
254
1.4

076 METRIC TABLES 4.0

12/3/98

3:02 PM

Page 37

Table M10-5. GD-10/GD-10F CapacitiesAir (m3/h)


Inlet
(bar)

Outlet
(bar)

1.0

.6
1.6
1.4
.3-1
2.2
1.7
.3-1.4
2.8
2.2
.3-1.7
4.1
3.3
.5-2.6
5.5
4.5
.7-3.4

2.0

2.8

3.4

5.2

6.9

Connection Size (mm)


8,10,15
20
25*,32,40
42.5
78.2
176.7
42.5
73.1
166.5
45.9
86.7
195.4
68.0
125.7
282.1
47.6
88.4
197.1
62.9
115.5
260.0
78.2
146.1
326.2
57.8
107.0
239.6
74.8
137.6
309.3
91.8
173.3
385.7
81.6
152.9
343.2
107.0
198.8
443.5
129.1
237.9
533.5
107.0
200.5
448.6
137.6
255.0
570.9
164.8
306.0
684.8

50
984.3
1224.0
1448.4
1915.9
1370.2
1936.3
2424.2
1776.5
2303.5
2867.9
2555.1
3299.7
3976.3
3328.6
4343.2
5084.7

Table M11-3. GD-24 Dimensions and Weights


Inlet
(bar)

Outlet
(bar)

8.0
8.6
5.5
.9-4.3
8.6
10.3
5.9
1-5.2
8.6
12.0
6.9
1.2-6
8.6
13.8
1.4-6.9
17.2
1.7-8.6
20.7
2-10.3
24.1** 2.7-12
29.3** 5.2-13.8

Connection Size (mm)


8,10,15
20
25*,32,40
76.5
144.4
322.8
171.6
317.8
712.0
200.5
373.8
834.3
144.4
270.2
604.9
219.2
406.1
909.1
236.2
440.0
983.8
214.1
397.6
888.7
251.5
469.0 1,046.7
273.6
508.1 1,133.4
271.9
506.4 1,130.0
309.3
574.3 1,282.9
380.6
708.6 1,582.0
453.7
842.8 1,881.0

50
2397.0
5283.6
6193.1
4488.0
6745.6
7301.5
6602.8
7774.1
8534.0
8387.8
9518.3
11908.5
14159.0
16408.0
19494.0

*GD-10F not available above 25 mm.


** 50mm GD-10 valve maximum inlet pressure is 20.7 bar.

Table M11-2. GD-24 CapacitiesWater (l/min)


P
(bar)

Connection Size (mm)


15
20
25
32
.5
11.4
15.1
26.5
34.1
.7
18.9
22.7
37.9
49.2
1.0
22.7
26.5
45.4
60.6
1.7
30.3
37.9
56.8
75.7
3.4
41.6
53.0
79.5
106.0
5.2
49.2
64.3
98.4
132.5
6.9
56.8
71.9
113.6
151.4
8.6
64.3
79.5
128.7
170.3
10.3
68.1
87.1
140.0
185.5
12.0
75.7
94.6
151.4
200.6
13.8
79.5
102.2
159.0
215.7
NOTE: Maximum pressure reduction ratio 10:1.

.5
.7
1.0
1.4
1.7
2.4
3.4
5.2
5.7
6.9
8.6
9.9

50
136.3
193.0
234.7
272.5
302.8
359.6
427.7
526.1
560.2
605.6
677.5
722.9

65
238.5
336.9
412.6
473.1
529.9
628.3
749.4
916.0
976.5
1,059.8
1,184.7
1,268.0

NOTE: Minimum flow is 4.9 l/min.

Connection Size (mm)


80
100
306.6
575.3
431.5
813.8
529.9
995.5
609.4
1,150.6
681.3
1,286.9
806.2
1,521.6
965.2
1,820.6
1,180.9
2,229.4
1,256.6
2,373.2
1,362.6
2,573.8
1,521.6
2,876.6
1,627.6
3,077.2

Connection Size (mm)


20
25
32
40
89
102
121 152
216
245
286 343
51
64
83
89
2.4
3.3
4.7
8.2
2.0
3.0
4.0
7.0

15
83
197
45
1.8
1.5

L (mm)
H (mm)
H1 (mm)
Wt (kg)
Cv

50
184
407
115
14.3
10.0

Table M12-4. GD-20 Dimensions and Weights


Size

Face-toA
H
H1
Face (mm) (mm) (mm) (mm)

50
65
80
100
125
150

195
270
270
308
380
400

152
178
191
229
254
280

415
550
577
637
839
908

81
105
120
135
169
194

Cv

Weight
(kg)

16
28
36
68
75
108

19.2
40.0
43.7
70.0
144.0
173.0

Table M12-2. GD-20 CapacitiesAir (m3/h)


40
60.6
83.3
102.2
132.5
189.3
230.9
265.0
295.2
325.5
352.0
375.0

50
83.3
121.1
147.6
189.3
268.7
329.3
378.5
423.9
465.6
500.0
533.7

Table M12-3. GD-20 CapacitiesWater (l/min)


P
(bar)

Symbol

Inlet
(bar)

Outlet
(bar)

1.0

.6
.9
.1-.7
1.2
1.0
.1-.8
1.6
1.4
.2-1.0
2.2
1.7
.3-1.4
2.7
2.2
.3-1.7
3.3
2.7
.4-2.0
4.1
3.3
.5-2.5
6.2
4.8
.7-3.4
6.9
5.5
.9-4.1
6.9
6.2
1.0-5.5

1.4

1.7

2.0

2.7

3.4
125
635.9
897.0
1,101.4
1,271.8
1,419.4
1,680.5
2,006.1
2,460.3
2,615.4
2,838.8
3,171.8
3,395.1

150
916.0
1,294.5
1,582.1
1,828.2
2,043.9
2,418.6
2,891.7
3,539.0
3,769.9
4,087.8
4,568.5
4,890.2

4.1

5.2

6.9

8.6

10.3

50
481
333
578
396
544
673
459
578
749
585
782
913
710
924
1,088
834
1,054
1,251
1,020
1,325
1,502
963
1,591
1,920
1,640
2,110
2,338
2,430
2,564
2,770

65
870
581
1,016
693
948
1,162
805
1,013
1,740
1,025
1,354
1,602
1,237
1,611
1,895
1,460
1,828
2,189
1,786
2,308
2,627
1,686
2,782
3,359
2,868
3,694
4,092
4,251
4,486
4,846

Connection Size (mm)


80
100
125
1,118
2,112
2,330
748
1,412
1,558
1,307
2,467
2,722
892
1,684
1,859
1,218
2,301
2,539
1,495
2,824
3,115
1,035
1,954
2,155
1,303
2,460
2,715
2,236
4,224
4,659
1,317
2,488
2,744
1,740
3,286
3,626
2,061
3,893
4,292
1,591
3,006
3,315
2,070
3,912
4,314
2,435
4,600
5,074
1,878
3,546
3,912
2,352
4,442
4,899
2,812
5,312
5,859
2,296
4,338
4,785
2,965
5,602
6,180
3,378
6,381
7,036
2,166
4,092
4,513
3,577
6,756
7,451
4,319
8,158
8,997
3,687
6,882
7,682
4,749
8,972
9,894
5,261
9,937
10,960
5,466
10,324
11,386
5,769
10,897
12,018
6,231
11,770
12,982

NOTE: Maximum pressure reduction ratio 10:1.


NOTES: Available in sizes below 2" upon request.
Differential valve (GD-21) available upon request.
Back pressure valve (GD-20R) available upon request

150
3,356
2,243
3,920
2,676
3,655
4,484
3,103
3,908
6,710
3,951
5,220
6,182
4,773
6,212
7,307
5,633
7,055
8,438
6,889
8,899
10,464
6,498
10,730
12,956
11,064
14,248
15,782
16,397
17,306
18,691

076 METRIC TABLES 4.0

12/3/98

3:02 PM

Page 38

Metric Tables
Table M15-1. GP-100, GP-32 Dimensions and Weights
Connection Size (mm)
Symbol

15
20
25
32
40
50
65
L (mm)
150
155
160
190
190
220
245
H (mm)
210
210
226
24
24
27
293
H1 (mm)
64
64
67
82
82
93
100
GP-100, GP-31A Wt. (kg)
6.0
6.0
8.0
12.0
12.0
17.0

GP-32/32A Wt. (kg)

20.0
24.0
Cv
1.5
2.3
4.0
6.5
9.0
16.0
25.0
NOTE: GP-100 is 15 mm-50 mm NPT, GP-32 is 50 mm-100 mm ANSI 125 lb flanged. For sizes 125 mm-200 mm consult factory.

80
290
343
122

34.0
36.0

100
330
391
144

53.0
64.0

Table M15-2. GP-18/28, 18A/28A Dimensions and Weights


Connection Size (mm)
Symbol

15
20
25
32
40
50*
65
80
100
125
150
200
250
L (mm)
219
222
257
270
283
305
264
305
375
480
505
597
715
H (mm)
311
311
369
369
383
415
483
512
592
697
741
822
864
H1 (mm)
77
77
87
87
94
103
125
139
170
225
225
271
330
GP-18/18A Wt. (kg)
10.0
10.0
16.0
17.0
19.0
25.0

GP-28/28A Wt. (kg)

25.0
35.0
44.0
87.0
141.0
197.0
323.0
409.0
Cv
2.1
3.5
6.25
9.7
14.0
20.8
36.0
46.0
79.5
114.0
152.0
265.0
412.0
NOTE: GP-18, 15 mm-50 mm are flanged and supplied with NPT companion flanges, gasket and bolts not shown. L dimensions include the companion flanges. GP-28 is ANSI 250 lb flanged.
* GP-28 50 mm flanged face-to-face 238 mm.

Table M15-3. GP-1/1A Dimensions and Weights


Connection Size (mm)
Symbol
20
25
32
40
50*
65
80
100
125
L (mm)
229
260
280
283
302
289
340
391
489
H (mm)
352
418
433
433
468
529
557
637
751
H1 (mm)
78
90
96
96
109
128
146
172
221
GP-1/1A Wt. (kg) 14.0
23.0
27.0
27.0
34.0
52.0
68.0
103.0
160.0
Cv
3.5
6.25
9.7
14.0
20.8
36.0
46.0
79.5
114.0
Note: 20 mm-50 mm are flanged and supplied with NPT companion flanges, gaskets and bolts not shown. L dimensions
include the companion flanges.
GP-1 50 mm and larger are ANSI 300 lb flanged.
*GP-1 50 mm flanged face-to-face 256 mm.

150
521
785
224
233.0
152.0

076 METRIC TABLES 4.0

12/3/98

3:02 PM

Page 39

NOTES: For GP-100, GP-32 capacities, multiply Table M16-1 values by factor listed in Table M16-2.
For GP-31A/32A air capacities (m3/hr), multiply steam capacities for GP-31/32 by 1.34.
For GP-18A/28A/1A air capacities (m3/hr), multiply steam capacities by 1.34.

Table M16-1. GP-18/28, GP-1 CapacitiesSteam (kg/hr)


Inlet
(bar)
1.4
2.0

2.8

3.4

5.2

6.9

8.6

10.3*

12.1

13.8

15.5

17.2**

20.7+

Outlet
(bar)
.35-.7
1.4
.35-1
2
1.7
.35-1.4
2.8
2.2
.35-1.7
4.1
3.3
.55-2.6
5.5
4.5
.7-3.4
6.9
5.5
.9-4.3
8.3
6.9
1-5.2
9.6
8.3
1.2-6
11.0
9.6
1.4-6.9
12.4
9.6
1.6-7.7
12.4
11.0
9.6
1.7-8.6
12.4
11.0
2-10.3

15
57
57
73
57
76
89
69
90
105
100
129
146
130
165
187
160
206
228
190
237
269
220
268
310
250
299
350
280
367
391
360
399
431
432
495
525
514

20
95
94
122
95
126
149
116
150
176
166
215
244
216
275
312
266
343
380
317
395
448
367
446
516
417
497
584
467
612
652
599
665
718
720
826
875
856

25
169
168
217
170
224
266
206
267
314
296
383
436
386
492
557
476
613
679
565
705
804
665
797
921
755
888
1,043
834
1,092
1,165
1,070
1,186
1,281
1,286
1,475
1,562
1,527

32
262
261
337
264
348
412
320
415
488
460
594
676
599
764
865
738
951
1,053
878
1,095
1,242
1,016
1,237
1,430
1,155
1,379
1,619
1,295
1,695
1,807
1,660
1,841
1,989
1,996
2,289
2,424
2,373

Connection Size (mm)


50
65
80
561
971
1,241
560
968
1,237
723
1,251
1,598
565
979
1,250
747
1,293
1,652
885
1,530
1,956
686
1,187
1,517
889
1,538
1,966
1,046
1,810
2,313
986
1,706
2,180
1,274
2,204
2,816
1,450
2,510
3,207
1,285
2,224
2,841
1,638
2,835
3,622
1,855
3,210
4,101
1,583
2,740
3,502
2,039
3,529
4,510
2,259
3,909
4,995
1,882
3,257
4,161
2,347
4,061
5,190
2,663
4,608
5,889
2,180
3,773
4,821
2,652
4,590
5,865
3,069
5,308
6,783
2,471
4,289
5,480
2,956
5,116
6,537
3,471
6,008
7,676
2,776
4,804
6,139
3,635
6,292
8,040
3,875
6,707
8,570
3,560
6,162
7,894
3,948
6,834
8,732
4,265
7,381
9,491
4,280
7,407
9,464
4,909
8,496
10,856
5,197
8,995
11,494
5,088
8,806
11,252

40
378
376
486
380
503
595
462
598
704
664
857
976
865
1,102
1,248
1,066
1,372
1,520
1,266
1,580
1,792
1,467
1,785
2,064
1,668
1,990
2,336
1,869
2,447
2,608
2,396
2,658
2,870
2,880
3,304
3,498
3,425

* GP -100, GP-32 to be used up to 10.3 bar inlet maximum.


** GP-18/28 to be used up to 17.2 bar inlet maximum.
+ GP-1 only to be used up to 20.7 bar inlet maximum.
++ GP-1 not available in these sizes.

Table M16-2. GP-100, GP-32 Capacity Factors


Connection Size (mm)
Factor

15
.714

20
.657

25
.640

32
.670

40
.643

50
.769

65
.694

80
.783

100
.805

100
2,143
2,138
2,762
2,161
2,855
3,380
2,622
3,398
3,998
3,768
4,868
5,543
4,911
6,260
7,088
6,052
7,794
8,633
7,192
8,970
10,177
8,332
10,136
11,722
9,471
11,298
13,267
10,610
13,894
14,812
13,609
15,091
16,300
16,357
18,762
19,864
19,446

125
3,075
3,066
3,961
3,099
4,095
4,847
3,760
4,872
5,733
5,403
6,980
7,949
7,042
8,976
10,164
8,678
11,176
12,379
10,313
12,862
14,594
11,947
14,535
16,809
13,581
16,200
19,024
15,214
19,924
21,240
19,514
21,640
23,373
23,455
26,904
28,484
27,885

150
4,100
4,088
5,281
4,132
5,459
6,463
5,014
6,497
7,644
7,205
9,306
10,598
9,389
11,968
13,551
11,571
14,901
16,505
13,751
17,149
19,459
15,929
19,380
22,412
18,108
21,600
25,366
20,286
26,565
28,320
26,146
28,853
31,164
31,273
35,872
37,978
37,180

200++
7,147
7,127
9,207
7,204
9,518
11,267
8,740
11,326
13,327
12,561
16,225
18,476
16,370
20,865
23,625
20,378
25,979
28,775
23,973
29,898
33,925
27,772
33,788
39,074
31,570
37,659
44,223
35,367
46,315
49,373
45,361
50,303
54,332
54,520

250++
11,112
11,081
14,314
11,201
14,798
17,517
13,589
17,609
20,719
19,529
25,225
28,726
25,450
32,425
36,731
31,363
40,390
44,737
37,272
46,483
52,743
43,178
52,531
60,749
49,082
58,549
68,755
54,985
72,006
76,760
70,524
78,207
84,470
84,771

076 METRIC TABLES 4.0

12/3/98

3:02 PM

Page 40

Metric Tables
Tables M18-2 and M25-2. GP-2000 and GP-2000R Dimensions and Weights
Size
(mm)

Face-to-Face (mm)
A
F
(mm)
(mm)
NPT
150#
300#
15
150

200
176
20
150

200
176
25
160

226
180
32
180

226
180
40
180

226
180
50
230
218
222
276
197
65

278
282
352
211
80

294
302
352
222
100

330
342
401
240
150

461
483
502
282
NOTE: 150 size valve standard in remote mount with 125 or 250 lb ANSI flanges.

Table M19-2. GP-11S Dimensions and Weights


Symbol
A (mm)
H (mm)
H1 (mm)
Wt (kg)
Cv

15
200
412
143
20
5.0

20
200
412
143
20
7.2

Connection Size
25
32
40
225
225 225
422
451 451
149
165 165
26
28
28
10.9 14.3 18.8

50
276
514
191
43
32.0

NOTE: 15mm through 50mm standard is integral mount.

Weights (kg)

H Integral
(mm)

H Remote
(mm)

H1
(mm)

H2
(mm)

398
398
404
434
434
498
552
575
658
712

362
362
367
384
384
406
440
456
511
711

170
170
175
192
192
216
251
264
321
406

244
244
254
283
283
321
375
400
489
800

NPT
14
14
19
22
22
33

H
(mm)

H1
(mm)

A
(mm)

244
244
251
282
282
319
373
399
488

74
74
76
90
90
103
122
135
167

200
200
226
226
226
276
352
352
401

150#

36
65
69
107
232

Cv

300#

36
65
72
111
250

5.0
7.2
10.9
14.3
18.8
32.0
60.0
78.0
120.0
223.0

Table M21-2. GD-2000K Dimensions and Weights


Face-to-Face (mm)
NPT
150#
300#
150

150

160

180

180

230
218
222

278
282

294
302

330
342

Size
(mm)
15
20
25
32
40
50
65
80
100

NPT
13
13
17
20
20
31

Weights (kg)
150#
300#

34
34
62
62
67
69
105
109

Cv
5.0
7.2
10.9
14.3
18.8
32.0
60.0
78.0
120.0

Table M20-2. GP-2000K1/GP-2000K2 Dimensions and Weights


Size
(mm)

Face-to-Face (mm)
NPT
150#
300#

15
150

20
150

25
160

32
180

40
180

50
230
218
65

278
80

294
100

330
* For GP-2000K2 add 31 mm to H dimension.
** For GP-2000K2 A 2 dimension is 172 mm.
+ For GP-2000K-2 weight, add 3 kg.

222
282
302
342

*H Integral
(mm)

H1
(mm)

A1
(mm)

F
(mm)

H Remote
(mm)

**A2
(mm)

NPT

319
319
329
359
359
419
472
495
578

170
170
175
192
192
216
251
264
321

200
200
226
226
226
276
352
352
401

175
175
200
200
200
200
225
225
251

244
244
250
282
282
321
375
400
489

125
125
125
125
125
125
125
125
125

16
16
20
23
23
34

Weights (kg)+
150#
300#

37
65
71
109

38
66
73
113

Cv
5.0
7.2
10.9
14.3
18.8
32.0
60.0
78.0
120.0

076 METRIC TABLES 4.0

12/3/98

3:02 PM

Page 41

Tables M26-1 and M34-1. GP-2000, GP-2000K-1, K-2, GD-2000K, GP-2000R, GP-11S, OB-2000, OB-2000PT CapacitiesSteam (kg/hr)

1.03
1.38
1.72
2.07
2.75

3.44

4.13

5.17

6.89

8.61

10.33

12.05

13.78

15.50

17.22

18.94

GP-11S ONLY

20.67

24.12

29.28

Outlet
(bar)
0-.21
.55
.21
.89
.68
.21
1.24
.21-.34
1.58
.21-.48
2.27
1.7
.21-.83
2.89
2.06
.21-1.17
3.5
3.1
2.4
.21-1.5
4.3
3.7
3.1
.27-2.1
5.8
5.1
4.1
.34-2.9
7.3
6.8
5.1
.48-3.7
8.7
6.8
.55-4.6
10.1
8.6
6.8
.55-5.5
11.7
10.3
8.6
.68-6.3
13.1
12.0
10.3
.82-7.21
13.78
12.05
10.33
.89-8.06
13.78
12.05
10.33
.89-8.06
13.78
12.05
10.33
.89-8.06
17.08
15.50
13.78
1.24-11.02
17.08
15.50
1.52-13.4

15
96
91
114
99
115
142
107
153
114
173
127
179
212
148
222
251
169
213
265
290
213
268
318
348
269
340
414
445
335
379
509
541
399
563
638
464
611
719
735
521
656
776
833
586
697
829
929
737
879
986
1,026
926
1,043
1,135
1,181
1,096
1,166
1,277
1,221
1,205
1,309
1,404
1,511
1,679
1,755
1,822

20
138
135
163
143
167
205
154
222
164
249
183
258
305
213
320
362
243
307
382
417
307
387
459
501
388
490
597
640
482
546
734
780
571
810
920
668
880
1,036
1,059
750
944
1,118
1,199
843
1,005
1,194
1,339
1,061
1,266
1,421
1,478
1,334
1,502
1,635
1,700
1,578
1,722
1,840
1,758
1,735
1,884
2,021
2,176
2,418
2,528
2,624

25
209
217
247
217
253
310
233
335
248
378
277
391
462
323
485
547
369
465
579
631
465
586
695
758
588
742
903
970
730
828
1,112
1,181
871
1,223
1,392
1,012
1,332
1,568
1,605
1,136
1,430
1,692
1,815
1,277
1,521
1,808
2,027
1,607
1,917
2,151
2,238
2,019
2,274
2,475
2,574
2,389
2,607
2,785
2,661
2,626
2,853
3,060
3,295
3,661
3,827
3,972

*150 mm valve standard with 125 lb or 250 lb ANSI flange connections and cast iron bodies.
** .69 bar inlet only applies to OB-2000 valve.
Maximum pressure reduction is 20:1 except for GD-2000K (10:1).
Minimum pressure reduction is 85% of inlet pressure.

32
274
261
325
284
332
406
307
440
327
496
364
512
607
424
637
717
484
611
759
829
610
769
912
995
772
973
1,185
1,272
958
1,086
1,459
1,549
1,143
1,610
1,827
1,328
1,748
2,056
2,104
1,490
1,876
2,220
2,382
1,676
1,996
2,372
2,659
2,109
2,514
2,823
2,936
2,650
2,983
3,247
3,377
3,135
3,421
3,653
3,491
3,374
3,743
4,014
4,323
4,803
5,021
5,211

Connection Size (mm)


40
50
360
613
343
584
427
727
374
637
437
743
535
910
403
686
579
986
430
731
652
1,109
479
816
673
1,147
798
1,811
558
945
837
1,426
944
1,606
636
1,083
803
1,368
998
1,700
1,089
1,854
798
1,366
1,011
1,721
1,199
2,041
1,308
2,226
1,015
1,015
1,280
2,179
1,558
2,653
1,672
2,847
1,259
2,144
1,428
2,431
1,918
3,265
2,037
3,468
1,503
2,559
2,117
3,603
2,402
4,089
1,747
2,973
2,298
3,912
2,706
4,606
2,766
4,709
1,960
3,337
2,466
4,199
2,920
4,970
3,131
5,330
2,204
3,751
2,624
4,466
3,119
5,309
3,405
5,950
2,773
4,719
3,304
5,628
3,711
6,318
3,861
6,571
3,484
5,930
3,921
6,676
4,269
7,266
4,440
7,557
4,121
7,015
4,497
7,656
4,803
8,176
4,617
7,813
4,529
7,712
4,922
8,377
5,278
8,985
5,683
9,673
6,314
10,747
6,600
11,235
6,852
11,663

65
1,150
1,095
1,364
1,195
1,393
1,707
1,286
2,080
1,372
2,080
1,530
2,151
2,546
1,781
2,673
3,011
2,031
2,566
3,188
3,468
2,562
3,227
3,827
4,175
1,728
4,086
4,975
5,704
4,020
4,558
6,122
6,947
4,799
6,756
8,191
5,576
7,336
8,637
9,434
6,257
7,873
9,320
10,678
6,828
8,376
9,955
11,921
8,850
10,553
11,846
13,165
11,119
12,517
13,624
14,170
13,153
14,354
15,330
14,649

80
1,495
1,424
1,773
1,554
1,812
2,219
1,672
2,889
1,784
2,889
1,966
2,796
3,536
2,343
3,475
4,183
2,641
3,336
4,144
4,830
3,330
4,196
4,975
5,799
4,214
5,312
6,468
7,416
5,227
5,926
7,959
9,032
6,238
8,784
10,648
7,249
9,537
11,229
12,265
8,134
10,235
12,116
13,881
9,145
10,889
12,942
15,498
11,505
13,719
15,400
17,114
14,455
16,272
17,712
18,421
17,099
18,661
19,929
19,044

100
2,300
2,191
2,728
2,390
2,788
3,414
2,573
4,446
2,746
4,446
3,060
4,302
5,441
3,563
5,348
6,435
4,064
5,133
6,376
7,430
5,124
6,455
7,654
8,877
6,487
8,172
9,952
11,409
8,042
9,105
12,242
13,896
9,598
13,513
16,382
11,152
14,677
17,275
18,869
12,515
15,747
18,640
21,356
14,069
16,753
19,912
23,843
17,701
21,107
23,692
26,330
22,238
25,034
27,250
28,340
26,307
28,709
30,660
29,753

150*

Upon application only consult factory.

Inlet
(bar)
**0.69

076 METRIC TABLES 4.0

12/3/98

3:02 PM

Page 42

Metric Tables
Table M29-3. OB-30/31 Dimensions and Weights
Size
(mm)

L
(mm)

H
(mm)

H1
(mm)

T
(mm)

K
(mm)

R
(mm)

Weights (kg)

Cv

15
20
25

80
85
95

315
315
315

130
130
130

10
10
10

200
200
200

15
15
15

2.8
2.8
3.0

3.7
4.6
5.8

Inlet
(bar)

Outlet
(bar)

Table M30-2. OB-30/31 CapacitiesWater (l/min)

Table M30-1. OB-30 CapacitiesSteam (kg/hr)


Inlet
(bar)

Outlet
(bar)

Cv Factors
.20
.35
.14
0
.55
.41
.7
.28
0
.83
.62
1.0
.41
0-.35
1.0
.7
1.38
.35
0-.14
1.38
1.0
1.72
.7
0-.35
1.72
2.0
1.0
0-.48
2.0
2.76
1.38
0-.83
2.76
3.45
2.0
0-1.2

Connection Size (mm)


15
20
25
3.7
4.6
5.8
30
38
48
37
45
58
46
57
72
34
43
54
47
59
75
57
70
89
70
87
110
46
57
72
63
78
99
75
93
118
91
113
143
63
79
99
82
107
135
100
125
158
106
132
167
68
85
106
93
115
145
110
136
172
122
151
191
72
90
114
117
146
185
137
170
215
111
138
175
149
185
234
168
209
263
122
151
191
174
205
259
199
247
311

NOTE: Where it is not possible to calculate pressure drop,


35%-40% of gauge supply pressure can be used as
a reasonable approximation.

Cv Factors
3.45
4.0
2.76
0-1.5
4.0
3.45
4.83
2.76
0-1.9
4.83
4.0
5.52
3.45
0-2.2
5.52
4.83
6.0
4.0
3.45
0-2.6
6.0
5.52
6.9
4.83
4.0
0-2.9
7.59
6.9
8.62
5.52
4.83
0-3.8
8.97
8.28
10.0
6.9
0-4.3

Connection Size (mm)


15
20
25
3.7
4.6
5.8
132
164
206
180
223
281
229
285
360
141
175
221
149
193
302
228
284
358
260
323
408
150
186
280
205
255
322
244
304
383
291
361
456
157
196
247
217
315
340
259
322
406
290
361
455
321
400
504
165
205
259
228
284
358
273
340
428
307
382
482
353
438
552
222
276
349
281
350
441
363
451
568
392
488
615
429
534
673
278
345
435
335
416
525
417
519
654
506
629
793

P
(bar)
.35
.70
1.00
1.40
1.80
2.00
3.50
5.20
7.00
8.70
10.40

15
30
45
55
63
70
77
100
123
143
160
175

Connection Size (mm)


20
25
38
47
55
70
67
83
78
100
83
107
97
120
127
157
150
187
175
217
197
248
217
267

076 METRIC TABLES 4.0

12/3/98

3:02 PM

Page 43

Table M30-4. Thermal Well Dimensions


Model
OB-30/31
OB-2000/2000PT
OBK-2000

A
(mm)

B
(mm)

C
(mm)

D
(mm)

E
(mm)

F
(mm)

G
(mm)

H
(mm)

20
25
25

25
20
20

204
197
318

7
7
7

20
23
20

20
25
20

15
20
15

10
16
13

H1
(mm)

H2
(mm)

A
(mm)

F
(mm)

G
(mm)

170
170
175
192
192
216
251
264
321

74
74
76
90
90
103
122
135
167

200
200
226
226
226
276
352
352
401

169
169
174
182
182
189
206
217
234

222
222
227
235
235
242
259
270
287

H
(mm)

H1
(mm)

A
(mm)

G
(mm)

398
398
404
434
434
498
552
575
658

170
170
175
192
192
216
251
264
321

200
200
226
226
226
276
352
352
401

166
166
178
185
185
166
166
166
166

Table M31-2. OB-2000 Dimensions and Weights


Size
(mm)

NPT
150
150
160
180
180
230

15
20
25
32
40
50
65
80
100

Face-to-Face (mm)
150#
300#

218
222
278
282
294
302
330
342

NPT
15
15
19
22
22
33

Weights (kg)
150#

36
63
69
107

300#

36
64
71
110

NPT
22
22
26
31
31
41

Weights (kg)
150#

43
72
78
120

300#

46
76
83
128

Cv
5.0
7.2
10.9
14.3
18.8
32.0
60.0
78.0
120.0

NOTE: For 150 mm consult factory.

Table M33-4. OB-2000PT Dimensions and Weights


Size
(mm)
15
20
25
32
40
50
65
80
100
NOTE: For 150 mm consult factory.

NPT
150
150
160
180
180
230

Face-to-Face (mm)
150#
300#

218
222
278
282
294
302
330
342

Cv
5.0
7.2
10.9
14.3
18.8
32.0
60.0
78.0
120.0

Limited Warranty and Remedy


Armstrong-Yoshitake, Inc. warrants to the original user
that those products supplied by it and used in the service
and in the manner for which they are intended shall be
free from defects in materials and workmanship for a
period of one (1) year after installation, but not longer
than fifteen (15) months from date of shipment. Except
as may be expressly provided for in a written agreement
between Armstrong-Yoshitake, Inc. and the user, which
is signed by both parties, Armstrong-Yoshitake, Inc.
DOES NOT MAKE ANY OTHER REPRESENTATIONS
OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR ANY IMPLIED WARRANTY
OF FITNESS FOR A PARTICULAR PURPOSE.

The sole and exclusive remedy with respect to the


above limited warranty or with respect to any other claim
relating to the products or to defects or any condition or
use of the products supplied by Armstrong-Yoshitake,
Inc. however caused, and whether such claim is based
upon warranty, contract, negligence, strict liability or any
other theory, is limited to Armstrong-Yoshitake, Inc.s
repair or replacement of the part or product, excluding
any labor or any other cost to remove or install said part
or product or, at Armstrong-Yoshitake, Inc.s option, to
repayment of the purchase price. Notice of any such
claim must be given in writing to Armstrong-Yoshitake,
Inc. within fifteen months after the first installation or use
of the products. In no event shall Armstrong-Yoshitake,
Inc. be liable for special, direct, indirect, incidental or
consequential damages, including, but not limited to,
loss of use or profits or to interruption of business activity.

Other Products
Flo-Rite-Temp

Radiator Products

Armstrongs tankless instantaneous steam water heater


provides up to 8,700 gallons
per hour instantly. It eliminates troublesome storage
tanks and allows you to heat
water as you need itwith
lower installed costs, less
maintenance and saved
space.

Thermostatic radiator valves,


traps, replacement capsules
and air vents for industrial,
commercial and residential
applications. Ask for catalog
AY-201.

Steam Traps

Control Valves

The Armstrong control valve


provides the flexibility to apply
the right valve to an application. Designed for steam
and hot water service, the
Armstrong control valve is
ideally suited to non-freezing
applications in the 1/2" to11/2"
range. Also available with an
integral steam separator.

Steam specialists for more


than 95 years, Armstrong
makes a full line of inverted
bucket, float and thermostatic, thermostatic and
controlled disc steam traps
in cast iron, steel and
stainless steel. We can also
meet unique application
needs with special trap
variations.

Armstrong-Yoshitake, Inc.

221 Armstrong Blvd., P.O. Box 408, Three Rivers, Michigan 49093 - USA Ph: (616) 278-6610, Fax: (616) 273-8656
Steam Traps \ Humidifiers \ Steam Coils \ Valves\ Water Heaters \ Air Vents \ Pumping Traps

Catalog AY-110-H 10M 8/98

www.armstrong-intl.com

Printed in U.S.A.

Das könnte Ihnen auch gefallen