Beruflich Dokumente
Kultur Dokumente
Contents
Click on a product catergory to navigate directly to that section:
1. API Connections 2. Hammer Lug Union 3. Manifold Fittings 4. High Pressure Couplings & Hoses 5. API 6A Valves 6. High Pressure Seamless Pipe 7. Turnkey Manifold
1. API Connections
1. API Connections
API Flanges
Oilquip offer a large range of API 6A and ANSI forged swivel flanges, Blind flanges, slip-on flanges and weld-neck flanges in 4130 carbon steel, to suit 2 to 6 nominal bore XXS pipe with pressure rating below. The API 6A specification requires a rigorous and unique quality system including stringent dimensional and NDT control. The application of an API monogram is that you, the client will be guaranteed of total compliance with the API specifications.
Max. Working Pressure Test Pressure Product Specification Levels API Temperature Rating
K (-60 Deg C) K (-60 Deg C) K (-60 Deg C) K (-60 Deg C) K (-60 Deg C) To To To To To
Y (+345 Deg C) Y (+345 Deg C) Y (+345 Deg C) Y (+345 Deg C) Y (+345 Deg C) Y (+345 Deg C)
1.1
1. API Connections
Studed Blocks
Flanged studded crosses and tees are available from 2 through to 6 with pressure ratings of 5,000 psi and 10,000 psi in AISI 4130 material.
Max Working Pressure Test Pressure Production Spec Levels API Temperature Rating Min. Yield Min. Tensile Material
K (-60 Deg C) K (-60 Deg C) K (-60 Deg C) K (-60 Deg C) K (-60 Deg C) K (-60 Deg C) To To To To To To
Y (+345 Deg C) Y (+345 Deg C) Y (+345 Deg C) Y (+345 Deg C) Y (+345 Deg C) Y (+345 Deg C) 60,000 PSI 85,000 PSI API 60K 60,000 PSI 85,000 PSI API 60K 60,000 PSI 85,000 PSI API 60K 60,000 PSI 85,000 PSI API 60K 75,000 PSI 95,000 PSI API 75K 75,000 PSI 95,000 PSI API 75K
1.2
Threaded Unions
We offer various sizes of API Line Pipe Threaded Unions. The Threads are gauged with calibrated working API gauges, which are inspected regularly with API master gauges.
Figure 1002
Recommended Service for the 1002 are Cementing, testing, and choke-and-kill lines with 10,000 psi (690bar) cold working pressure on 4 sizes and 7,500 psi (517 bar) cold working pressures on 5 and 6 sizes. The main features of these unions are that they have a replaceable lip type primary seal, which protects the secondary metal to metal seal, and minimises the flow turbulence. Both Butt-weld and Threaded connections are available. The Unions are also available for sour gas service: 7,500 psi (517 bar) cold working pressure.
Figure 1502
Recommended Service for the 1502 are Cementing, testing, and choke-and-kill lines with 15,000 psi (1034bar) cold working pressure. The main features of these unions are that they have a replaceable lip type primary seal, that protects the secondary metal to metal seal, and minimises the flow turbulence. Both Butt-weld and Threaded connections are available. The Unions are also available for sour gas service: 10,000 psi (690 bar) cold working pressure, butt-weld configurations only.
2.1
Standard Service
Max Working Pressure 1,000 PSI 2,000 PSI 2,000 PSI 4,000 PSI 6,000 PSI 10,000 PSI 10,000 PSI 15,000 PSI Max Test Pressure Colour Code 1,500 PSI 3,000 PSI 3,000 PSI 6,000 PSI 9,000 PSI 15,000 PSI 15,000 PSI 22,500 PSI Sub - Yellow Nut - Black Sub - Grey Nut - Blue Sub - Grey Nut - Blue Sub - Red Nut - Black Sub - Orange Nut - Black Sub - Blue Nut - Red Sub - Green Nut - Black Sub - Red Nut - Blue N/A N/A N/A
N/A
Sour Service
Max Working Pressure Max Test Pressure N/A N/A N/A N/A N/A N/A 4,000 PSI 6,000 PSI 7,500 PSI 7,500 PSI 10,000 PSI 15,000 PSI
6,000 PSI 9,000 PSI 11,250 PSI 11,250 PSI 15,000 PSI 22,500 PSI Sub - Green Nut - Green Sub - Green Nut - Green Sub - Green Nut - Green Sub - Green Nut - Green Sub - Green Nut - Green Sub Green Nut Green
2.2
3. Manifold Fittings
3. Manifold Fittings
Full Flow High Pressure Manifold Fittings are manufactured from wrought iron steel. Crosses and Tees are closed die forges to ensure they have a correct grain flow, high integrity and uniform shape. Both 45 and 90 elbows are produced from hollow or tubular bars, hot formed on purpose made bending machines or forged in closed dies. Full ranges of fittings from 2 to 6 are available with standard pressure ratings of 5,000 psi and 10,000 psi.
3.1
3. Manifold Fittings
SIZE D FULL FLOW CROSS A B R APPROX WEIGHT (Kg) SIZE D FULL FLOW TEE A B R APPROX WEIGHT (Kg)
2 3 4 5 6
54 48 94 138 208
2 3 4 5 6
39 33 63 90 143
SIZE D
SIZE
2 3 4 5 6
33 28 51 76 132
2 3 4 5 6
44 37 71 100 154
SIZE D
SIZE D
2 3 4 5 6
53 53 70 65 76
20 14 39 57 105
2 3 4 5 6
56 56 75 72 76
14 9 26 37 57
SIZE D
SIZE D
2 3 4 5 6
26 76 51 51 76
8 29 52 87 177
2 3 4 5 6
58 76 51 51 76
7 19 31 50 89
SIZE
SIZE
2 3 4 5 6
47 48 91 133 238
2 3 4 5 6
48 51 97 142 255
3.2
3. Manifold Fittings
High Pressure Manifold Fittings
Manifold Fittings are available either Full Flow or with reducing configurations in all pipe wall schedules, for the following pressure ratings:
Max Working Pressure Test Pressure (PSI) Operating Temperature Range Min. Yield Min. Tensile Material 5,000 PSI 7,500 -60 to +345 Deg C 52,000 PSI 66,000 PSI MSS-SP-75 Gr WPHY 52 7,500 PSI 11,250 -60 to +345 Deg C >80,000 PSI 105,000 PSI ASTM A234 Gr 4130 10,000 PSI 15,000 -60 to +345 Deg C >80,000 PSI 105,000 PSI ASTM A234 Gr 4130 15,000 PSI 22,500 -60 to +345 Deg C >80,000 PSI 105,000 PSI ASTM A234 Gr 4130
N/A Hardness (Max) Elongation In 2 or 50mm 197 HB Long: 30% Trans: 20%
32%
25%
18%
3.3
3. Manifold Fittings
API 6A Crosses and Tees
Flanged Studded Crosses & Tees and Flanged Crosses & Tees are available either equal or with reducing configuration for use with the following pressure ratings:
Max. Working Pressure Test Pressure Product Specification Levels API Temperature Rating Min. Yield Min. Tensile Material 2,000 PSI 3,000 PSI 1, 2, 3 & 4 3,000 PSI 4,500 PSI 1, 2, 3 & 4 5,000 PSI 7,500 PSI 1, 2, 3 & 4 10,000 PSI 15,000 PSI 1, 2, 3 & 4 15,000 PSI 22,500 PSI 1, 2, 3 & 4 20,000 PSI 30,000 PSI 1, 2, 3 & 4
K (-60 Deg C) K (-60 Deg C) K (-60 Deg C) K (-60 Deg C) K (-60 Deg C) K (-60 Deg C) To To To To To To
Y (+345 Deg C) Y (+345 Deg C) Y (+345 Deg C) Y (+345 Deg C) Y (+345 Deg C) Y (+345 Deg C) 60,000 PSI 85,000 PSI API 60K 60,000 PSI 85,000 PSI API 60K 60,000 PSI 85,000 PSI API 60K 60,000 PSI 85,000 PSI API 60K 75,000 PSI 95,000 PSI API 75K 75,000 PSI 95,000 PSI API 75K
3.4
4.1
4.2
5. API 6A Valves
5. API 6A Valves
Gate Valves
The through conduit gate valve has been developed to satisfy the need for a high quality, high specification valve which is reliable and reasonably priced. Oilquip gate valves make full use of modern materials and manufacturing techniques. The valve is robust, easy to maintain, conforms to international Design requirements and Quality Assurance programmes. The gate valve conforms to all aspects stated in the API.6A Standard. Manufacture of the valve takes place in a Plant that is regularly audited by Third Party Auditing Bureaux to ensure the API.Q1 and ISO9001 are fully maintained. The initial cost of this valve is very competitive, but the longer term saving resulting from robustness and low cost of spares makes it the most affective valve on the market today. Gate Valves are available in manual or remote operation for use in the following pressure ratings and services:
Pressure & Temperature Ratings
Max Working Pressure Test Pressure Production Spec Levels Product Rating API Temperature Rating 2,000 PSI 3,000 PSI 1, 2, 3 & 4 1&2 3,000 PSI 4,500 PSI 1, 2, 3 & 4 1&2 5,000 PSI 7,500 PSI 1, 2, 3 & 4 1&2 10,000 PSI 15,000 PSI 1, 2, 3 & 4 1&2 15,000 PSI 22,500 PSI 1, 2, 3 & 4 1&2 20,000 PSI 30,000 PSI 1, 2, 3 & 4 1&2
K (-60 Deg C) K (-60 Deg C) K (-60 Deg C) K (-60 Deg C) K (-60 Deg C) K (-60 Deg C) To To To To To To
Y (+345 Deg C) Y (+345 Deg C) Y (+345 Deg C) Y (+345 Deg C) Y (+345 Deg C) Y (+345 Deg C)
5.1
5. API 6A Valves
Material Requirements
Material Class AA - General Service BB - General Service CC - General Service DD - Sour Service** EE - Sour Service** FF - Sour Service** HH - Sour Service** Body, Bonnet, End and outlet Connections Carbon or Low Alloy Steel Carbon or Low Alloy Steel Stainless Steel Carbon or Low Alloy Steel* Carbon or Low Alloy Steel* Stainless Steel* Corrosion Resistant Alloys* Pressure Controlling Parts Carbon or Low Alloy Steel Stainless Steel Stainless Steel Carbon or Low Alloy Steel* Stainless Steel* Stainless Steel* Corrosion Resistant Alloy*
Mud Valves
Oilquip have a solution for the increasing high-pressure demands placed upon modern drilling mud systems. By introducing a gate valve capable of working at pressures as high as 5,000psi & 7,500 psi. They are purpose made for mud, cement, fracturing and water service. The body and bonnet of the valves are manufactured from forged steel to increase structural strength. The Oilquip valves are manufactured to conform to API 6A quality levels PSL 1, 2 or 3 and pressure tested to either API 6A or API 6D requirements. Full material tractability is guaranteed. Valves are available in a variety of sizes from 2-6 and can also be supplied with flange, hub, hammer unions, threaded or butt-weld ends. Sour service valves conform to the requirements of NACE MR-01-75.
5.2
5. API 6A Valves
Material Requirements
Material Class AA - General Service BB - General Service DD - Sour Service** EE - Sour Service** Body, Bonnet, End and outlet Connections Carbon or Low Alloy Steel Carbon or Low Alloy Steel Carbon or Low Alloy Steel* Carbon or Low Alloy Steel* Pressure Controlling Parts Carbon or Low Alloy Steel Stainless Steel Carbon or Low Alloy Steel* Stainless Steel*
Material Requirements
Material Class AA - General Service BB - General Service DD - Sour Service** EE - Sour Service** Body, Bonnet, End and outlet Connections Carbon or Low Alloy Steel Carbon or Low Alloy Steel Carbon or Low Alloy Steel* Carbon or Low Alloy Steel* Pressure Controlling Parts Carbon or Low Alloy Steel Stainless Steel Carbon or Low Alloy Steel* Stainless Steel*
5.3
5. API 6A Valves
API 6A Choke Valves
Choke Valves are available in manual or remote operation for use in the following pressure ratings and services:
Pressure & Temperature Ratings
Max Working Pressure Test Pressure Production Spec Levels Product Rating API Temperature Rating 2,000 PSI 3,000 PSI 1, 2, 3 & 4 1&2 3,000 PSI 4,500 PSI 1, 2, 3 & 4 1&2 5,000 PSI 7,500 PSI 1, 2, 3 & 4 1&2 10,000 PSI 15,000 PSI 1, 2, 3 & 4 1&2 15,000 PSI 22,500 PSI 1, 2, 3 & 4 1&2 20,000 PSI 30,000 PSI 1, 2, 3 & 4 1&2
K (-60 Deg C) K (-60 Deg C) K (-60 Deg C) K (-60 Deg C) K (-60 Deg C) K (-60 Deg C) To To To To To To
Y (+345 Deg C) Y (+345 Deg C) Y (+345 Deg C) Y (+345 Deg C) Y (+345 Deg C) Y (+345 Deg C)
Material Requirements
Material Class AA - General Service BB - General Service CC - General Service DD - Sour Service** EE - Sour Service** FF - Sour Service** HH - Sour Service** Body, Bonnet, End and outlet Connections Carbon or Low Alloy Steel Carbon or Low Alloy Steel Stainless Steel Carbon or Low Alloy Steel* Carbon or Low Alloy Steel* Stainless Steel* Corrosion Resistant Alloys* Pressure Controlling Parts Carbon or Low Alloy Steel Stainless Steel Stainless Steel Carbon or Low Alloy Steel* Stainless Steel* Stainless Steel* Corrosion Resistant Alloy*
5.4
5. API 6A Valves
Material Requirements
Material Class AA - General Service BB - General Service CC - General Service DD - Sour Service** EE - Sour Service** FF - Sour Service** Body, Bonnet, End and outlet Connections Carbon or Low Alloy Steel Carbon or Low Alloy Steel Stainless Steel Carbon or Low Alloy Steel* Carbon or Low Alloy Steel* Stainless Steel* Pressure Controlling Parts Carbon or Low Alloy Steel Stainless Steel Stainless Steel Carbon or Low Alloy Steel* Stainless Steel* Stainless Steel*
5.5
6.1
2.2 .088 2.3 .090 2.8 .109 2.9 .113 3.4 .133 3.6 .140 3.7 .145 3.9 .154 5.2 .203 5.5 .216 5.7 .226 6.0 .237 6.6 .258 7.1 .280 8.2 .322 9.3 .365 10.3 .406 11.1 .438 12.7 .500 14.3 .562 15.1 .594 17.5 .688
6.2
7. Turnkey Manifold
7. Turnkey Manifold
Oilquip design, manufacture, inspect and test 5000 PSI, 10000 PSI & 15000 PSI Choke & Kill Manifolds, Christmas Tree Manifolds, High Pressure Cement Manifolds and High Pressure Standpipe Manifolds.
Oilquip can provide systems designed to customer specifications to ensure reliable delivery of materials as required. By incorporating components such as Adjustable and Positive Chokes, Hydraulic Drilling Chokes, API Flanges, Hammer Lug Unions, API Studded Crossses and Tees, Adaptors, Spools, Blinds, Crossovers and Fittings, Choke Control Console, High Pressure Manifold Fittings, High Pressure Gate Valves (Manual and Hydraulic Gate Valves), High Pressure Plug Valves, Forged Crosses, Forged Tees, Forged Long Radius Elbows, Pressure Tested Assembly, Individually Pressure Tested Fittings and Gate Valves, Mud Vales, Drop Forged Manifold Fittings, Chokes, High Pressure Choke Valves, High Pressure Check Valves, Hammer Union Forged Tees and Elbows a depending on the application from our own stock availability, Oilquip can control the quality and programming of even very complex systems. Oilquip is keen to work with clients to provide the right solution for individual projects. Where applicable or to meet client requirements and are supplied fully certified by independent third party authorities. API 16C Specification for Choke & Kill Systems API RP53 Recommended Practice for Blow Out Prevention Systems for Drilling Wells NPD/NMD Norwegian Petroleum Directorate / Norwegian Maritime Directorate API 6A Specification for Wellhead and Christmas Tree Equipment NACE MR-01-75 Sulphide Stress Cracking Resistant Metallic Materials for Oilfield Equipment - NORSOK Norwegian Offshore Sector
7.1
7. Turnkey Manifold
Pressure & Temperature Ratings
Max Working Pressure Test Pressure Production Spec Levels Product Rating API Temperature Rating 5,000 PSI 7,500 PSI 1, 2, 3 & 4 1&2 K (-60 Deg C) To Y (+345 Deg C) 7,500 PSi 11,250 PSI 1, 2, 3 & 5 2&2 K (-60 Deg C) To Y (+345 Deg C) 10,000 PSI 15,000 PSI 1, 2, 3 & 4 1&2 K (-60 Deg C) To Y (+345 Deg C) 15,000 PSI 22,500 PSI 1, 2, 3 & 4 1&2 K (-60 Deg C) To Y (+345 Deg C) 20,000 PSI 30,000 PSI 1, 2, 3 & 4 1&2 K (-60 Deg C) To Y (+345 Deg C)
Material Requirements
Material Class AA - General Service BB - General Service DD - Sour Service** EE - Sour Service** Body, Bonnet, End and outlet Connections Carbon or Low Alloy Steel Carbon or Low Alloy Steel Carbon or Low Alloy Steel* Carbon or Low Alloy Steel* Pressure Controlling Parts Carbon or Low Alloy Steel Stainless Steel Carbon or Low Alloy Steel* Stainless Steel*
7.2
7.3
Oilquip Limited
Unit 6A/B, Throckley Way, Middlefield Industrial Estate, South Shields, Tyne & Wear NE34 0NU United Kingdom Tel: +44 (0) 191 456 0466 Fax : +44 (0) 191 454 1066 Email: sales@oilquip.co.uk