Beruflich Dokumente
Kultur Dokumente
DN D1 D
H3
Z-
M
L
4-d
H1
D0 D0
K
LI
L2
H2
H1
D0 D0
D0 D0
0-M H G N11
ISO
CE R
T
9001
9001 :2008
D363H LTD373H
Lug Type High Performance Butterfly Valves
D373H
Water Type High Performance Butterfly Valves
D663H
Metal Sealing Pneumatic Butterfly Valves
Performance Parameters
Design Standards: GB, API, ANSI, DIN, ISO and jis Nominal Diameter: DN50-3600mm ( 2 - 144 ) Nominal Pressure: PN6-PN100 ( 150LB-600LB ) Materials Scope: Carbon Steel, Stainless Steel and Alloy Steel Sealing Materials: Stainless Steel, Hard Alloy Operated by: Bevel, Worm Wheel, Electric, Pneumatic, Hydraulic, Electric & Hydraulic Temperature Scope: - 29 to 730 deg C Applicable Mediums: Water, Oil, Gas and Weak Corrosive Mediums like Acid, Alkali and Salt
ISO
CE R
T
9001
9001 :2008
Performance Parameters
Design Standards : GB, API, ANSI, DIN, ISO, JIS and AWWA Nominal Diameter : DN50-3600mm (2-144) Nominal Pressure : PN2.5-PN50 (86LB-300LB) Materials Scope ; Cast Iron, Ductile Iron, Nickel-Chromium Alloy Cast Iron, Carbon Steel, Stainless Steel, Alloy Steel Sealing Materials: NBR, EPDM, VITON, PTFE Operation Methods: Handle, Worm Wheel, Electric, Pneumatic, Hydraulic, Electric & Hydraulic Temperature Scope : - 29 to 150 deg C Applicable Mediums : Weak corrosive Mediums like Water, Sea Water, Oil and Gas
ISO
CE R
T
9001
9001 :2008
Introduction to Products
Design Standards : GB, ANSI, ISO, DIN Nominal Diameter : DN150-1800mm (6-72) Nominal Pressure : PN10-PN100(150LB-600LB) Materials Scope: Ductile Iron, Carbon steel, Stainless Steel, Alloy Steel, Bronze Operated by : Automatic shut-off and cylinder to buffer Temperature Scope : - 29 to 730 deg C Applicable Mediums : Water, steam, oil, etc
ISO
CE R
T
9001
9001 :2008
Tilting Disk Check Valves with the functions of Triple Eccentric Metal Hard Sealing Butterfly Valves and Swing Check Valvesare the new check valvesdeveloped on the base of our may years production technology in valves.With triple eccentric structure, the new utility-type energy-saving tilting disk check valves consist of two sections, the included angle of valve set and the center line of valve body flow channel is 55 degrees with the merits of short travel and no friction when open-close operation the more pressure, the better sealing function, during the operation of closing valve plate, the seal operation can be fulfilled without no punch and collisiondue to the action of damping mechanism, top it off, it has the merits of long service life, wide applicable scope, short travel, energy saving, large flow, small resistance and small pressure loss.Therefore, the valves are the new high performance energysaving check valves with all storng points of Triple Eccentric Hard Sealing Butterfly Valves and Normal Slow Closure tType Check Valves.Tilting Disk Check Valves are applicable to mounting in the pipelines both horizontl and vertical. .
HBH747H
Hydraulic Slow Closure Butterfly Check Valves
Introduction to Products
Design Standards : GB, ANSI, AWWA, DIN Nominal Diameter : DN300 -3600mm (12 - 144) Nominal Pressure : PN6 - PN25 (86LB - 300LB) Materials Scope: Cast Iron,Ductile Iron, Carbon Steel, Stainless Steel, Sealing Materials: Rubber, Stainless Steel Operated by : Full Hydraulic Control, counter - weight pressure - holding, counter - weight locking Temperature Scope : - 29 to 425 deg C Applicable Mediums : Water, etc.
ISO
CE R
T
9001
9001 :2008
HD7BT43 X
ISO
CE R
T
9001
9001 :2008