Beruflich Dokumente
Kultur Dokumente
Dear Custumer Thank you for your confidence in buying this Polti product for perfect ironing in less time. Your Vaporella has been designed to ensure maximum ironing comfort; its quality materials make it a reliable work-mate. The powerful jet of Vaporella steam acts on the fabrics eliminating every crease. Therefore it is not necessary to press on or iron repeatedly. Just let the iron slide over the garment to obtain perfect ironing, saving time and effort. With Vaporella it is possible to iron vertically to revive fabrics and take out bad smells from jackets, clothes and overcoats. Before using Vaporella, we recommend reading these instructions carefully.
KEY A) Patented safety cap B) Generator on/off switch C) Iron on/off switch D) Power supply cable E) Monoflex (power and steam) F) ON indicator light ( constant) Lack of water (- - - when flashing) G) Iron temperature control H) Steam on/off button J) Continuous steam jet button K) Pressure indicator light I) Funnel L) Steam flow regulator M) Iron heating indicator light
ENGLISH
This unit conforms with EC-directives 89/336 as amended by 93/68 (EMC) and 73/23 as amended by 93/68 (low voltage).
Polti S.p.A. reserves the right to change equipment or accessory specification without prior notice. 26
ENGLISH
ENGLISH
28
For STEAM ironing, set the iron temperature to its maximum travel on the COTTON - LINEN steam position (fig.3), by turning the dial (G). NB Set at its maximum, do NOT set against the picture of iron on the dial (G). Most fabric types, other than delicates can be STEAM-ironed at this temperature, please consult the garment label. If you want to DRY iron, set the dial (G) to the required temperature for the fabric, as shown on the dial. NB fabric indications on the dial are for DRY ironing, for STEAM ironing set at maximum travel as explained above. Wait for both the pressure indicator light (K) and the iron heating indicator light (M) to go out (about 15 minutes). Push the button (H) on the iron to release bursts of steam from the holes on the soleplate. Release the button and the steam flow stops (fig.4). NOTE: during initial operation of the iron, a few drops of water mixed with steam may come out of the soleplate until the temperature stabilises. It is advisable to direct the first jets of steam onto an old cloth until a uniform jet of steam is obtained. By turning the steam flow control knob (L) you can vary the quantity of steam according to the kind of textiles to be ironed (more or less delicate). You can increase the steam flow by turning the knob in clockwise direction. Turning it in an anticlockwise direction reduces the steam flow (fig.5). We suggest the maximum emission for heavy textiles like jeans and linen, medium for cotton, minimum for light delicate textiles. In order to have a continuous steam jet, move the button (J) forwards. Steam will keep on coming out, even releasing the steam request button. To interrupt the outlet, move the button (J) backwards (fig.6). NOTE: Both (K) and (M) lights go on and off during operation; this is quite normal and means that the electric resistance is operating to maintain constant the pressure in the boiler. 29
ENGLISH
ENGLISH
30