Sie sind auf Seite 1von 8

MSI Bluetooth Dongle Installation Guide

Driver version: 1.4.2.10 Date: 2004/07/12

Step 1
1. Download the 1.4.2.10 package from MSI website http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_ten.php?UID =305 and then unzip (click the MSI_Bluetooth_Software.exe) it.

2. You will see a folder as MSI_Bluetooth_Software open the folder and double-click setup.exe, please following the installshield wizard to install step by step.

Copyright 2004 by Micro-Star International Co. LTD.

1/8

3. During installation

4. Then a license key (Security code) request dialog will show as below. Please fill with the Security Code dialog and click ok. And finish the installation then reboot system.

Please remember your BD address.

Copyright 2004 by Micro-Star International Co. LTD.

2/8

(If you dont know what is the security code or BD Address for your dongle, Click Cancel to go through the installing process.)

5. Go through the installing process

Copyright 2004 by Micro-Star International Co. LTD.

3/8

6. Then the dialog will appear and inserted the USB dongle and then click OK. Continue the installing process.

7. Finished.

Copyright 2004 by Micro-Star International Co. LTD.

4/8

Step 2: Enter License Key (security code)


1. Make sure that the USB dongle is inserted and driver loaded. 2. Because the Bluetooth Software version 1.4.2 build 10 will check the hardware license, so you must request a license key(security code) from WIDCOMMs website (http://66.45.42.85/msi).( see below) And please fill with these fields (Name, e-mail, *BD_ADDR.) which are on the website and submit. And then you will receive a mail which include the license key (Security code). *how to find BD_ADDR? (page.7)

The Security Code will be sent to your email address. (Please remember your email address)

Copyright 2004 by Micro-Star International Co. LTD.

5/8

3. After you got the License key (Security code), open the folder of MSI Bluetooth Software, you will see another folder named svcpack and open it.

4. Then you will see an application name BTFaeSec.exe Double-click it.

Copyright 2004 by Micro-Star International Co. LTD.

6/8

a. If you have installed driver 1.3.1, the BD address will show on dialog. It is your dongles BD address (device address). And then go to WIDCOMM website to get the corresponding security code.

b. If you can not see BD address showed on dialog, please execute AddressReader.exe to find the BD address.

Execute AddressReader.exe

It is your dongles BD address (device address). And then go to WIDCOMM website to get the corresponding security code.

Copyright 2004 by Micro-Star International Co. LTD.

7/8

5. Enter the security code in the field on the dialog and then click OK. 6. Restart your computer. 7. Right-click the Bluetooth icon on the system bars and clicks Start Using Bluetooth. Then the Bluetooth Software can be used if matched.

Note: If you want to use another MSI Bluetooth dongle, just enter a folder named svcpack, and double-click BTFaeSec.exe, the Security Code dialog will show, input the dongle corresponding security code. Every dongle have a unique BDADDR. (BD_ADDR= Bluetooth Device Address)

Copyright 2004 by Micro-Star International Co. LTD.

8/8

Das könnte Ihnen auch gefallen