Beruflich Dokumente
Kultur Dokumente
for publication - prEN ISO 1288 1-5 (documents on mechanical strength measurement methods): revision - FprEN 15998 (Safety in case of fire Fire resistance Glass testing methodology for the purpose of classification) At UAP (unique acceptance procedure) - Revision of EN 410:1998 (Determination of luminous and solar characteristics of glazing) - Revision of EN 673:1997 (Determination of thermal transmittance (U value) - Calculation method) - Revision of EN 674:1997 (Determination of thermal transmittance (U value) - Guarded hot plate method) - Revision of EN 12758 (Glazing and airborne sound insulation - Product descriptions and determination of properties: revision)
At CMC to launch UAP - Revision of EN 675:1997 (Determination of thermal transmittance (U value) Heat flow method
(Glass
block
walls,
design,
dimensioning
and
- prEN 12488 (Glazing requirements Assembly rules): being discussed in CEN TC 129 WG12 Parallel ISO/CEN enquiry for revision comments available - prEN ISO 14439 (Glazing requirements Use of glazing blocks) Amendment of English version after CEN enquiry - prEN 15681-1 (Basic alumino silicate glass products Part 1: Definitions and general physical and mechanical properties) - prEN 15681-2 (Basic alumino silicate glass products Part 2: Evaluation of conformity/Product Standard) - prEN 15682-1 (Heat soaked thermally toughened alkaline earth silicate safety glass - Part 1: Definition and description) - prEN 15682-2 (Glass in building - Heat soaked thermally toughened alkaline earth silicate safety glass - Part 2: Evaluation of conformity/Product standard) - prEN 15683-1 (Thermally toughened soda lime silicate channel shaped safety glass - Part 1: Definition and description) - prEN 15683-2 (Glass in building - Thermally toughened soda lime silicate channel shaped safety glass - Part 2: Evaluation of conformity/Product standard) - prEN 15755-1 (Adhesively backed polymeric filmed glass - Part 1: definitions and descriptions) - prEN 15752-1 (Adhesive backed polymeric film - Part 1: Definitions and descriptions)
Failed enquiry (new versions under preparation by CEN TC 129 WG8) - prEN 13474-1 (Design of glass panes Part 1: General basis for design) - prEN 13474-3 (Design of glass panes Part 3: Design for line and concentrated loads) Approval by TC 129 to launch enquiry - Coated glass - Part 5: Test method and classification for the selfcleaning performances of coated glass surfaces Seeking approval of TC 129 to launch UAP -Revision of EN 1863-1:2000 (Heat strengthened soda lime silicate glass Part 1: Definition and description) - Revision of EN 13024-1:2002 (Thermally toughened borosilicate safety glass Part 1: Definition and description)
Existing draft or discussed in working groups Revision of: - EN 572-1: 2004 (Basic soda lime silicate glass products - Part 1: Definitions and general physical and mechanical properties) EN 572-2:2004 (Basic soda lime silicate glass products - Part 2: Float glass) EN 572-3:2004 (Basic soda lime silicate glass products - Part 3: Polished wired glass) EN 572-4:2004 (Basic soda lime silicate glass products - Part 4: Drawn sheet glass) EN 572-5:2004 (Basic soda lime silicate glass products - Part 5: Patterned glass) EN 572-6:2004 (Basic soda lime silicate glass products - Part 6: Wired patterned glass)
EN 572-7:2004 (Basic soda lime silicate glass products - Part 7: Wired or unwired channel shaped glass) EN 572-8:2004 (Basic soda lime silicate glass products Part 8: Supplied and final cut sizes) EN 1748-1-1:2004 (Special basic products Borosilicate glasses Part 11: Definition and general physical and mechanical properties) EN 1748-1-2:2004 (Special basic products Borosilicate glasses - Part 12: Evaluation of conformity/Product standard) EN 1748-2-1:2004 (Special basic products Glass ceramics Part 2-1: Definition and general physical and mechanical properties) EN 1748-1-2:2004 (Special basic products Borosilicate glasses - Part 12: Evaluation of conformity/Product standard) EN 12150-1:2000 (Thermally toughened soda lime silicate safety glass Part 1: Definition and description EN 12337-1:2000 (Chemically-strengthened soda lime silicate glass - Part 1: Definition and description) EN 14449:2005 (Laminated glass and laminated safety glass Evaluation of conformity/Product standard) EN EN for EN for 1096-1:1998 (Coated glass - Part 1: Definitions and classification) 1096-2:2001 (Coated glass - Part 2: Requirements and tests method class A, B and S coatings) 1096-3:2001 (Coated glass - Part 3: Requirements and test methods class C and D coatings)
EN 356:1999 (Security glazing - Testing and classification of resistance against manual attack) EN 13541:2000 (Security glazing Testing and classification of resistance against explosion pressure)
Others:
WI 00129058 (Terminology) WI?? (Unframed glass doors - Product standard) WI?? (Painted glass) WI00129092 (Prefabricated glazing/partitions made of glass blocks and reinforced concrete) WI00129093 (Floors made of reinforced concrete and glass pavers) prEN 13474-2 (Design of glass panes - Part 2: Design for uniformly distributed loads) WI?? (Thermal stress design) WI ?? (Assembly rules for sloping glazing) WI?? (Adhesively backed polymeric filmed glass - Part 2: Evaluation of conformity/Product standard) WI?? (Adhesive backed polymeric film - Part 2: Evaluation of conformity/Product standard) WI ?? (Acid etched glass and sand blasted glass - Part 1: Definitions and descriptions) WI ?? (Acid etched glass and sand blasted glass - Part 2: Evaluation of Conformity/Product Standard) Work items withdrawn by TC 129 WI 00129041 (General survey of the glass product standards and of the glass product test method standards) prEN 13424 Parts 1 and 2 (Heat strengthened borosilicate glass) prEN 12725-2 (Glass block walls Part 2: Evaluation of conformity/Product standard) prEN 1098 (Determination of the thermal transmittance (U value) Calibrated and guarded hot box method) WI 00129046 (Determination of transmittance of glazing to long wave radiation) prEN 357-2 (Part 2 of fire standard) WI 00129022 (Test for overhead glazing)