Beruflich Dokumente
Kultur Dokumente
ceramics
These materials have a large number of non-localized electrons, as an effect are very good conductors of electricity and heat. They are strong yet deformable, and extensively used in structural applications
metals
line defects
Among the elements in the periodic table, Which group of elements are the most electronegative
halogens
In the periodic table, the elements are arranged in vertical columns called groups and numbered in roman numerals. These elements are called
congeners
Topaz. Quartz. Talc. Corondum. In the Moh's scale, which of the following is the hardest mineral
corondum
copper
Materials composed of more than one material type and are designed to display a combination of the best characteristics of each component material
composites
allotrope
What do you call those forces which hold molecules together in crystals
This metal is alloyed with steel to give it corrosion resistance properties, resulting in stainless steel
chromium
In order to prevent corrosion of metals in galvanized iron, what element is added to steel
zinc
This element is used in modern, super strong permanent magnets because of their high coercivities
neodymium
A kind of solid which is characterized as consisting of ordered three-dimensional arrays of structure motif is classified as __ solids
crystalline
The heat treatment done in materials that improve its strength and machinability hardens the material resulting in loss of ductility is known as
normalizing
It is a form of alpha-beta brass with about 60% copper, 40% zinc and a trace of iron that is altered as an alloy
muntz
A notation system in crystallography for planes and directions in crystal (Bravais) lattices
miller index
schottky imperfections
The deterioration of an engineered material due to interaction with diverse environments which lead to the degradation of its material properties
corrosion
It is the point at which there is an appreciable elongation of the material without any corresponding increases of load
yield point
This component measures the pulling or pushing action perpendicular to the section
axial forces
manganese
The ratio of the elastic modulus of the material to the density of the material is the __ modulus
specific
The type of bond that occurs as a result of the formation of an electric dipole within certain atoms or molecules is called
secondary bond
face-centered cubic
simple cubic
What is the atomic packing factor for FCC closed packed crystal structure
0.74
It is the interchange of an atom from a normal lattice position to an adjacent vacant lattice
vacant diffusion
What gives the average ratio of stress to strain of the material operating in the non-linear region of the stress-strain diagram
secant modulus
What is the theoretical maximum value of the Poission's ratio of any given material subjected to a uniform triaxial stress
1/2
Ordinary steel heated at high temperature of 1130 C that has 1.7 carbon as one of its constituent
austenite
Group of dielectric materials that exhibits spontaneous polarization in the absence of an electric field
ferroelectric
120 Celsius
hypereutectoid steel
chromium
covalent
A method in determining the hardness of a material that uses very small diamond indented into surface features using microscope on metallographic specimen
Materials that are utilized in transducer devices that convert electrical energy into mechanical strains or vice versa
piezoelectric
What do you call a form of stress assisted corrosion, wherein vapor bubbles form nd then burst on a surface causing damage to the underlying materla
Cavitation
class II
A type of matrix composite where the fiber may be continuous throughout the length of the component, or less than a micrometer in length, and present at almost any volume fraction, from 5 to 75%
metal matrix
fatigue strength
A mistake in engineering materials that involves atom, ion lattice site or interstitial position is reffered to as __ defect
point defect
The size of an electron is very small, the diameter is however believed to be about __ anstrom
0.0001
A property of matter that is often used by chemist as an identification tag for a substance
density
cemented carbide
polymer
What are the substances having the same chemical formula but different structure
isomers
These are large molecule substances bonded to each other with weak bonding forces and softens when heated
thermoplastics
fermi energy
It occurs when a member carries a load perpendicular to its long axis while being supported in a stable manner
bending stress
A type of corrosion that occurs when dissimilar metals exist at different electrical potentials in the presence of an electrolyte
galvanic corrosion
Corrosion that occurs in austinic stainless steels under tensile stress in the presence of oxygen, chloride ions, and high temperature
This bond is similar to the molecular bond and occurs due to the ease with which hydrogen atoms are willing to give up an electron to atoms of oxygen, fluorine, or nitrogen
hydrogen bond
Ferrite. Chromium. Nickel. Molybdenum. All of the following materials possess high strength and low ductility and are BCC structure except
nickel
pressure stresses
toughness
A type of line defect consists of an extra row or plane of atomes in the crystal structure
edge dislocations
isotropic
unit cell
The amount of force required to cause a unit deformation (displacement) often called the spring constant is the
stiffness
The thermal stress in a bar that is allowed to expand freely when heated to higher temperature is
zero
When applied normal and shear stresses are resolved in such a manner that the shear stresses vanish (go to zero), the resulting normal stresses are called the
principal stresses
What is the material stress for brittle materials, in the calculation of allowable stress from the formula
ultimate strength
Full Annealing. Normalizing. Tempering. Quenching. In the manufacture of steel, all of the following are processes to relieve internal stresses, refine grain size, and soften material (i.e., improve machinability) except
quenching
screw dislocations
The quantity needed to close the circuit around a crystalline dislocation is called
Burger's vector
mass defects
A ductile material is one that can be stretched, formed, or drawn to a significant degree before fracture. A metal that exhibits a percent elongation greater than __% is considered to be ductile
It refers to the arrangement of the grains in metal, with a grain having a particular structure
grain structure
Is the property or ability of a metal to exist in two or more crystalline forms depending upon temperature composition
polymorphism
A solid solution where the atoms of the solute element are small enough to fit into the spaces between the parent material atoms
A phase of uranium material where it posseses a lattice structure of BCC and expands equally in all directions
gamma phase
The description or type of lattice structure formed in metals such as Beryllium is the __ structure
The weakly repulsive force experienced in most non-metals and organic compounds (e.g. bismuth, paraffin, and silver) when exposed to a magnetic field is
diamagnetism
Joules/m3
A linear polymer that has all of the side group on the same side of the chain
isotactic
The property of fluids by virtue of which they offer resistance to flow is known as
viscocity
cassiterite
sphalerite
What is the mixture of two or more materials, at least one is a metal with microstructure where secondary atoms are introduced as substitutional or interstitial in a crystal lattice
alloy
What materials have permeability slightly greater than that of free space
paramagnetic
What is the process of forming continuous shapes by forcing a molten polymer through a metal die
extrusion
bulk defects
If the distorion disappears and the material remains distorted then this material undergoes what
plastic strain
The property of a substance which remains constant if no heat enters or leaves the system, while it does work or
entropy
alters its volume, but which increases or diminishes should a small amount of heat enter or leave
filtration
The amount of energy needed to change a given mass of ice to water at constant temperature is called the heat of
fusion
Chemical action may involve all of the separation of the molecules in a mixture following except
exothermic
colorless
water
Fluorine
When chlorine water and carbon tetrachloride are mixed with an unknown, a violet layer is produced. The unknown is
Iodide
The sublevel that has only one orbital is identified by the letter
3 electrons
The number of orbitals in the second principal energy level, n=2, of an atom is
Oxygen. Citric Acid. Sodium Chlorate. Hydrochloric Acid. Which of the following is a binary compound
Hydrochloric Acid
Potassium Chlorate
Name the element whose atom shows the greatest affinity for an additional electron
Cl
oxygen
+4
Left
oxygen
F, Cl, Br, I
AgBr
a dehydrating agent
In a graphic representation of energy contents of reactants and resulting products, which would have a higher energy content in an exothermic reaction
the reactants
The process of separating components of a mixture by making use of the difference in their boiling points is called
fractional distillation
According to the activity chart of metals, which metal would react most vigorously in a dilute acid solution
Magnesium
Gaseous Diffusion
When a gas is collected over water, the Subtracting the vapour pressure of water pressure is corrected by at that temperature
1:8
Decomposing water by an electric current will give it a ratio of hydrogen to oxygen by volume equal to
2:1
800 cal
The abnormally high boiling point of water in comparison to similar compounds is due primarly to
hydrogen bonding
base
A foam is an example of
When another crystal was added to a water solution of the same substance, the crystal seemed to remain unchanged. Its particles where
10 g NaCl
A synthesis reaction will occur spontaneously if the heat formation of the product is
Whenever you have equal volumes of gases at the same temperature and pressure, the volume must
It is the transfer of energy from the more energetic particles of substance to the adjacent less energetic ones as a result of interactions between the particles
conduction
It indicates that the rate of heat conduction in a direction is proportional to the temperature gradient in that direction
diamond
It is the mode of energy transfer between a solid surface and the adjacent liquid or gas that is in motion, and it involves the combined effect conduction and fluid motion
convection
In second law of thermodynamics, which of the following states that no heat engine can have a thermal efficiency of 100% on as far as power plant operates, the working fluid must exchange heat with the environment as well as the furnace
Kelvin-Plank
In second law of thermodynamics, which of the following states that no device can transfer heat from cooler body to a warmer one without leaving an effect on the surroundings
Clausius Statement
light efficacy
States that the thermal efficiencies of all reversible heat engines operating between the same two reservoirs are the same, and that no heat engine is more efficient than a reversible one operating between the same two reservoirs
Carnot principle
For a metal atom to replace another kind higher on the electromotive chart than of metallic ion in a solution, the metal the metal in solution atom must be
a product is soluble
A salt derived from a strong base and a weak acid will undergo hydrolysis and give a solution that will be
basic
An increase in concentration
mol/L
The pH concentration of a solution that has a hydrogen ion concentration of 1 x 10^-4 mol/L is
L is
The concentration of the un-ionized molecules must be relatively large compared to the ion concentrations
temperature
an organic acid
a proton donor
A buffer solution __
resists changes in pH
endpoint
Methane
Radium
Which of the following when dissolved in water and placed in the conductivity apparatus will cause the light to glow
table salt
bone black
Hematite
The emission of beta particle results in a new element with the atomic number
increased by 1
exothermic process
The total energy of the system. It contains the translational, rotational, vibrational, electronic, and nuclear energies and the energies due to intermolecular interactions. Its absolute value is unknown; its change is defined by the first law of thermodynamics. It is a state function and an extensive quantity
Internal Energy
A property that is determined by the state of the system. The change in the state function is path independent and defined by the properties in the initial and final state only
state function
The law states that the quantity of the substance entering and leaving the system is equal to the substance leaving the system
States that if system A is in thermal equilibrium with system B, and system B is in thermal equilibrium with system C, then system C is also in thermal equilibrium with system A
Energy is neither created nor destroyed, but is converted from one form to another
A process in which the system is always infinitesimally close to equilibrium. Such a process can never be observed, it is only of theoretical interest
Reversible process
States that the change in entalphy of a reaction is the sum of the enthalpies of reactions from which the reaction can be built
Hess' Law
States that every substance has finit positive entropy except the entropy of pure, perfect crystalline structure which is 0 at 0 K
Helmholtz Energy
In a closed system at constant volume and temperature its energy decreases during a spontaneous process
Helmholtz Energy
In a closed system at constant pressure and temperature its energy decreases during a spontaneous process
Gibbs Energy
The number of intensive variables that can be changed independently in the system without disturbing the number of phases in equilibrium
degrees of freedom
A solution in which both the solvent and the solute obey Raoult's Law for any composition
Ideal solution
It states that the vapour pressure in a solution is the sum of the vapour pressure of the pure component multiplied by the mole fraction of that component
Raoult's law
The principle that the amount of gas dissolved under equilibrium in a volume of liquid is in direct proportion to the pressure of the gas that contact the liquid surface
Henry's Law
Electrolyte
Colligative properties
Movement of the solvent through a semipermeable membrane from a dilute solution to a more concentrated one
Osmosis
Partition
States that if an external stress is applied to a system at equilibrium, the system adjusts in such a way to decrease the effect of the stress
Le Chatalier's principle
It is a constant of proportionality between the reaction rate and the concentration of reactants
rate constant
Reaction order
The sequence of elementary steps describing the time evolution of the system
reaction mechanism
parallel reaction
16
initiation step
Branching step
A reaction in which the number of chain carriers is constant but the product is consumed
Retardation Step
termination step
8, 43
Any person who shall violate any provision of RA 9292 or any rules, regulations, the Code of Ethics, and the Code of Technical Standards of Practice is stated in section
35
The chairperson of the PRC shall include in the Commission's program the implementation of RA 9292, the funding of which shall be included in the Annual General Appropriations Act
Sec 40
Rule 1
RA 8792
It is a method of managing all the activities that affect the quality of goods or services in order to prevent faults
Quality Assurance
This process can be used to measure achievement in Total Quality Management system. Also it provides the essential control and measure feedback loop necessary for quality improvement
Benchmarking
To aid the engineer manager about the needs of his peers, __ states that employees have five basic needs which are as follows: physiological, security, social, esteem and self-actualization
What style of leadership should the engineer manager use when his unit is manned by professionals
When is the effectivity date of the implementing rules and regulations of RA 9292
October 2, 2007
When there is an unexplained decline in revenues and profits in the company, it is a sign that the engineer manager has __
inadequate control
integrity
collateral bond
acid-test ratio
The ratio of net income before taxes to the net sales is the
profit margin
What do you call the value of the stock as stated on the stock certificate
par value
The interest rate being referred to in economics is __ if the compounding of the interest is annual
effective rate
The rate of an investment ratio as defined in economics is the ratio of the net income to __
owner's equity
The present worth of all depreciations over the economic life of the item is __
capital recovery
What do you call a market situation where there are many sellers and few buyers
oligopsony
A market situation where a unique product or service is available from a single vendor and that vendor can prevent the entry of all others into the market
monopoly
In handling unsolcited or unwanted commercial and promotional advertisements and surveys, complainants who are not satisfied with
3 months
the action of the Public Telecom Entities or Content Providers may bring the matter to the NTC in writing within __ from receipt of the alleged text spam
This type of business organization can be set up without any formality. It exists when there are a number of people involved who are part owners of the business
Partnership
What is the mimimum fine for persons who violate a provision of RA 9292
Php 100,000
If an EE is to appear as an expert witness in court arbitration hearings, the minimum fee chargeable to the client will not be less than __ attendance or appearance
Php 1,000
The basic law providing for the regulations of radio station communications in the Philippines and other purposes
RA 3846
Which of the following is not true for Be a citizen and a resident of the the qualifications of Board Members of Philippines for 5 consecutive years prior Electronics Engineering to his appointment
As provided in ACT 3846, the construction of a radio station shall begin only when
In accordance with Radio Laws and Regulations, a base station in the Land
2 years
Mobile Service must maintain entry in its logbook, for a period of __ if emergency signal is received
It is the process of attracting potential employees to the company so that the selection process can be carried out
Recruitment
It is the name given to any activity undertaken by the organization with the express purpose of gaining information about potential customer
Market Research
In accordance with the Philippine Electronic Code the maximum accumulated permissible dose (MPD) of radiation associated with a radio transmitter for a human being who is 54 years old is __ rems
180
Department Order No. 88 at the DPWTC also require the supervision of an ECE in the operation and maintenance of any radio communications system composed of __ more of any type of land radio stations
The maximum fine for any violation of RA 3846, an act of providing for the regulation of radio and communications
2 years
The minimum carrier output power of transmitters that require supervision of an Electronics Engineer is
1 kW
In class B FM transmitter, the antenna height must be at least __ above the average terrain
500 ft
In NTC 03-11-02005, it states that any person or entity intending to register as VoIP service provider has to post a performance bond of how much
5 Million
contract
What refers to a fundamental obligation under the contract which goes to the root of the contract
condition
What refers to a statement or oath, often religious in nature, agreed by an individual in ceremonies
creed
What is defined as a non-performance that results in the injured party receiving something substantially less than or different from what the contract is intended
Material Breach
What unit is used to measure the accumulative effects of radiation that can cause generic and somatic effects
Roentgens
What refers to the process of producing, forming or fabricating electronic equipment and/or related components, parts, devices and accessories
manufacturing
February 9, 2011
board licensure examination for electronics technician (ECT) was done in the city of Manila on __
The promulgation of the syllabi/table of specification for the subject in the board licensure examination for electronics Board Resolution No. 1 Series of 2011 technician (ECT) is also known as the Board of Electronics Engineering __
To qualify for the Electronics Technician examination, he/she must be a graduate of an Associate, Technician, Trade or Vocational course in electronics or, subject to the evaluation of the Board, such equivalent and/or related formal or non-formal course or program from any school, college, university, or training insitution recognized by the government or the State where it is established after completing a resident course or program of not less than __
2 years
What costs represents money which has been spent or capital which has been invested and which cannot be recovered due to certain reasons
sunk costs
NTC memorandum Circular requires Class B-1 to have a transmitter power of 500W and an effective radiated power not lower than __ watts
1000
In Metro Manila, commercial load shall not exceed __ minutes for one hour program
15
fair value
The __ of a property is what the property is worth to the owner as an operating unit
It is used when products are made singly or in small batches. It happens when a small number of products are processed at each storage before going on to the next stage
job production
It involves a voluntary association of people, called members, who operate an enterprise collectively. The aim of this organization is not to make profit but to give support to their members
Cooperative
__ depreciation is due to the lessening in the demand for the function which the property was designed to render
functional
A provision placed in a contract which indicates the possible adjustment of material and labor costs is called
escalatory clause
forfeiture
The sum of direct labor cost incurred in the factory and the direct cost of material are known as __ costs
prime
What refers to a principal function of lower management which is to instill in the workforce a comitment and
motivating
What government agency was designated as the chairman of the Electronic Commerce Promotion Council
DTI
RA 9292, Section 17 states that the result of the board examination shall be released within __ days after the examination
15
It is the rational way to ensure that our limited time is always used effectively
time management
According to the code of professional ethics and conduct, each and every engineer shall recognize and respect the supreme authority of the __ as expressed in its laws and implemented by its agencies
state
In continuing Profession Education, how many points will be given to the resource speaker of a recognized seminar/convention
5 CU per hour
In continuing Profession Education, how many additional points will be given upon completing a Master's degree
30 CU
In Continuing Profession Education, how many points will be given to a panelist/reactor/ of a recognized
3 CU per hour
program
dietary calories
radius
density
temperature
The specific volume of a substance is the volume per gram of substance. Specific volume is an example of?
How many million tons of hydrogen are converted into helium every second at the sun?
700 million
What is the expression of the magnitude and direction of the lattice distortion associated with dislocation?
Burgers Vector
What theorem relates the line integral of a vector field around a simple closed curve C is in IR3 to an integral over surface S for w/c C is the boundary?
Stokes Theorem
A tornado warning siren on top of a tall pole radiates sound waves uniformly in all directions. At a distance of 15.0 m the intensity of the sound is 0.250 W/m2. At what distance from the siren is the
75
Consider an idealized model with a bird (treated as a point source) emitting constant sound power, with intensity inversely proportional to the square of the distance from the bird. By how many
-6.0 dB
A stopped organ pipe is sounded near a guitar, causing one of the strings to vibrate with large amplitude. We vary the tension of the string until we find the maximum amplitude. The string is 80% as long as the stopped pipe. If both the pipe and the string vibrate at their fundamental frequency, calculate the ratio of the wave speed on the string to the speed of sound in air.
0.40
The Concorde is flying at March 1.75 at an altitude of 8000m, where the speed of sound is 320 m/s. How long after the plane passes directly overhead will you hear the sonic boom?
20.5 sec
A glass flask with volume 200 cm3 is filled to the brim with mercury at 20C. How much mercury overflows when the temperature of the system is raised to 100C? The coefficient of linear expansion of the glass is 0.40 x 10-5 K-1
2.7 cm3
An aluminium cylinder 10 cm long, with a cross-sectional area of 20 cm2, is to be used as a spacer between two steel walls. At 17.2C it just slips in between the
walls. When it warms to 22.3C, calculate the stress in the cylinder and the total force it exerts on each wall, assuming that the walls are perfectly rigid and a constant distance apart.
You are designing an electronic circuit element made of 23 mg of silicon. The electric current through it adds energy at the rate of 7.4 mW = 7.4 x 10-3 J/s. If your design doesnt allow any heat transfer out of the element, at what rate does its temperature increase? The specific heat of silicon is 705 J/kg-K.
0.46 K/s
A geologist working in the field drinks her morning coffee out of an aluminium cup. The cup has a mass of 0.120 kg and is initially at 20.0 C when she pours in 3.00 kg of coffee initially at 70.0 C. What is the final temperature after the coffee and the cup attain thermal equilibrium? (Assume that coffee has the same specific heat as water and that there is no heat exchange with the surroundings.)
66.0 C
In the Iron-Iron carbide diagram, the alloys containing solid phase with more that 2% carbon are known as?
cast iron
__ is use to nullify the effect harmful effect of sulphur in steel and is added during deoxidation?
Manganese
cementite
__ raises the elastic limit and ultimate strength of the steel without reducing the
silicon
ductility?
__ the combination of operation involving the heating of metal/alloy in solid state and cooling it to obtain the desired properties?
heat treatment
martensite
Any steel heated to a particular temperature above the critical temperature results in the formation of?
martensite
The principal source of information in the actual process of autenite under nonequilibrium condition as a?
TTT Diagram
__ involves heating to a predetermined temperature, holding at that temperature and then cooling at a very slow rate?
Annealing
The total electrical resistivity of a metal is equal to the sum of temperature-, impurity-, and cold work-dependent contributions?
Matthiessens rule
phonon
The time-dependent permanent deformation that occurs under stress; for most materials it is important only at elevated temperatures?
creep
depreciation
call the method of repaying a debt, the principal and interest included, usually by a series of equal payments at periodic intervals of time?
A type of bond where in the security is in sums form of recognized commercial papers of a well established subsidiary?
collateral bond
In handling unsolicited or unwanted commercial and promotional advertisement and surveys, complainants who are not satisfied with the action of the Public Telecom Entities or Content Providers may bring the matter to the NTC in writing within _____ from receipt of the alleged text spam?
3 months
In accordance with the International Telecommunications Union, the Philippines as well as Japan, belong to what region as far as frequency allocation and wage is concerned?
region 3
What is the minimum fine for persons who violate a provision of R.A. 9292?
P 100,000
The electronic designer will furnish how many sets of drawings, classifications and other contract documents?
In accordance with the Philippine Electronic Code the maximum accumulated permissible dose (MPD) of radiation associated with a radio transmitter for human being who is 54
180
It refers to the process of producing, forming or fabricating electronic equipment and/or related components, parts, devices and accessories?
manufacturing
E.O. 205
Find the amount at the end of two years and seven months if P1000 is invested at 8% compounded quarterly using simple interest for anytime less than a year interest period?
P 1226.34
A steel tape 100m long is 2mm too short. The effective dimension of the steel tape is 40mm, 20mm thickness, and 20mm width. How much tensile pull should be applied at the edge of the steel tape to have 100m distance? The modulus of elasticity for steel is 200000MPa?
3200 N
Line defects
Copper
A kind of solid which is characterized as consisting of ordered three dimensional arrays of structure motif, is classified as __ solids.
crystalline
factor of 0.52?
What gives the average ratio of stress to strain of the material operating in the non-linear region of the stress-strain diagram?
secant modulus
A tank 8 m in diameter, 12 m high is completely filled with water. Determine the minimum thickness of the tank plating if the stress is limited to 40 MPa?
11.72mm
8%
What do you call a form of stress assisted corrosion, wherein vapor bubbles form and then burst on a surface causing damage to the underlying material?
cavitation
pressure stresses
fluorine
When chlorine water and carbon tetrachloride are mixed with an unknown, a violet layer is produced. The unknown is a(n)?
iodide
Name the element of the first 20 whose atom gives up an electron the most readily?
When a gas is collected over water, the Subtracting the vapour pressure of water
at that temperature*
At 5 atm pressure and 70 degs C, how many moles are present in 1.5L of O2 gas? Grahams Law refers to?
0.267
Gaseous diffusion
Heat content
Exothermic process
In a closed system at constant volume and temperature its energy decreases during a spontaneous process?
Helmholtz Energy
In a closed system at constant pressure and temperature its energy decreases during a spontaneous process
Gibbs Energy
It states that the vapour pressure in a solution is the sum of the vapour pressure of the pure component multiplied by the mole fraction of that component.
Raoults Law
The principle that the amount of gas dissolved under equilibrium in a volume of liquid is in direct proportion to the pressure of the gas that contact the liquid surface
Henrys Law
Reaction order
Elementary step
Assumes that the concentration of a reaction intermediates is constant during the main part of the reaction.
Steady-state approximation
Termination step
Mr. Mangalindan would like to earn 7% of his income after payment of his taxes due. If the income of his investment will be taxed 42%, what is the minimum rate of return, before payment, must his investment has to attain his goal?
12%
How much heat must be supplied to a pan of 500 g to increase the temperature from 20C to 100C if the pan is made up of aluminum? Specific heat capacity of aluminum is 0.22 cal/g-C.
8800 cal
A heat engine operates with a supplied heat of 65 kcal and exhausts 40 kcal. How much work is done by the engine?
104600 J
A charge A of +250 statcoulomb is placed in between 2 charges B of +50 statcoulomb and C of -300 statcoulomb. A is 5 cm from B and 10 cm from C. What is the force on A?
1250 N
The amount of force required to cause a unit deformation (displacement) often called the spring constant is the?
stiffness
What is the material stress for brittle materials, in thecalculation of allowable stress from the formula?
ultimate strength
Determine the maximum torque that can be applied to a hollow circular steel shaft of 100-mm outside diameter and 70-mm inside diameter without exceeding a shearing stress of 60 MPa or a twist of 0.5 deg/m. Use G=83 GPa.
5,403 N-m
A simple beam having a span of 6 m has a weight of 20kN/m. It carries a concentrated load of 20kN at the left end and 40 kN at 2m from the right end of the beam. If it is supported at 2m from the left end and at the right end, compute the reaction at the right end of the beam.
40 kN
A type of line defect consist of an extra row or plane of atoms in the crystal structure?
edge dislocations
High levels of UV radiation, either short term or long term, are known or believed to cause all the following except?
ozone depletion
A diverging lens?
If a spaceship is slowing down, that is, losing speed in the forward direction, the perceived force inside the ship is directed Defined as 1/ candle per square
centimetre?
Lambert
Who developed a wave equation, the solution of which described the wave amplitude of the matter waves as well as the allowed energy values the particle can have?
Erwin Schrodinger
These are highly penetrating electromagnetic radiation, not deflected by magnetic or electric fields, and produce little ionization?
gamma particles
Under which of the following conditions only at low densities when the molecules does the behavior of a real gas resemble are relatively far apart that of an ideal gas?
Consider two water drops at a temperature T. These drops are not allowed to exchange energy with their environment. These two drops collide and combine. How does the temperature of these drops change when they combine?
increase
Which of the following quantities has the greatest Influence on the overall steam temperature at the steam turbine efficiency of a conventional (Rankine inlet cycle) electric generating station burning fossil fuels?
yield strength
Kuntosis
Sulfuric Acid
Scandium
Mo
500 years ago, Rajah Salayog deposited P0.01 with an interest rate of 5% per annum. Now the bank discovered that you are the only left in the clan and entitled to receive the money. How much is it?
Php 393,618,232.3
It is a financial summary showing the relationship among assets, liabilities, and ownership in the corporation on a specific date?
balance sheet
The promulgation of the syllabi/table of specification for the subjects in the board licensure examination for electronics technician (ECT) was done in the city of Manila on?
February 9, 2011
The promulgation of the syllabi/table of specification for the subjects in the Board Resolution No. 1 Series of 2011 board licensure examination for electronics technician (ECT) is also known as the Board of Electronics
Engineering __ ?
To qualify for the Electronics Technician examination, he/she must be a graduate of an Associate, Technician, Trade or Vocational course in electronics or, subject to the evaluation of the Board, such equivalent and/or related formal or non-formal course or program from any school, college. university or training institution recognized by the government or the State where it is established after completing a resident course or program of not less than?
2 years
According to the syllabi for the Electronics Technician licensure examination, which of the following is not classified under technical subjects?
In Continuing Profession Education, how many additional points will be given upon completing a Masters degree?
30 CU
In Continuing Profession Education, how many points will be given to the resource speaker of a recognized seminar/convention?
5 CU per hour
In Continuing Profession Education, sole authorship of book monograph with more than 100 page will merit the author
40 CU