Beruflich Dokumente
Kultur Dokumente
5/5-10
Movitec A
High-pressure in-line pumps with and without speed control 50 Hz
Movitec V(S)
Movitec LHS
Movitec V PD
Applications
Movitec V(S) /-PD and LHS /-PD are used for general water supply, spray irrigation, irrigation and pressure boosting duties, for warm water, hot water and cooling water recirculation, condensate transport. They are installed in boiler feed circuits, domestic water supply systems, washing plants, water treatment and filter systems, degreasing baths/alkaline cleaning agents, alkaline solutions and oils/emulsions, fire-fighting systems, as well as reverse osmosis and surface treatment applications.
Designation
Type series Movitec V Material variant Flange design Size Number of stages PumpDrive
Movitec V
S F 10 -- 3 PD
Design
Movitec LHS 6 -- 10
Type series Size Number of stages PumpDrive Material variant: Flange design/connection: blank or S, see page 3 F = Round flange V = Victaulic coupling
PD
Pump Multistage, vertical (horizontal installation see page 5) high-pressure centrifugal pump, with suction and discharge nozzles of identical nominal diameters arranged opposite to each other (in-line design).
Drive
Without speed control Electric motor, 50 Hz, air-cooled, 2-pole and 4-pole, KSB standard motor with main dimensions to IEC. Other motor makes subject to prior consultation with KSB. Movitec V, VS, LHS with PTC thermistors for motors > 3 kW. Variants: single-phase AC motor, 60 Hz (see type series booklet 1798.56-10). With PumpDrive speed control system Enhanced with PumpDrive, a Movitec pump together with the appropriate sensors is turned into an intelligent, variable speed pumping system, ideal for both single-pump operation and multiple pump configurations with up to six pumps (see type series booklet PumpDrive 4070.5-10).
Operating data
Movitec V(S) /-PD Flow rate Head Operating pressure Operating temperature Movitec LHS /-PD Flow rate Head Operating pressure Operating temperature
1) 2)
Q H pd t Q H pd t
up to 75 m3/h (21 l/s) up to 249 m up to 25 bar 1) --15 _C to +120 _C up to 8.6 m3/h (2.4 l/s) up to 401 m up to 40 bar 1) --15 _C to +120 _C 2)
The sum of inlet pressure and shut-off head must not exceed the value indicated. Discharge pressure < PN 25: up to 120 _C
Conformity mark
CE (all pumps), ACS (Movitec VE / V) ATEX Group II, Cat. 2 and 3 on request (not for Movitec PD)
LHS 6
For Movitec 2, 4, 6, 10 15 and 90 please refer to type series booklet Movitec B, reference No. 1798.52-10 n 1450 1/min
VC 90 V(S) 90
V(S ) 10
V(S ) 15
V(S) 24
Movitec A Materials
Part No. 101 108 160 171 10-6 210 230 341 412 525 529
1)
Description Movitec V Pump casing Stage casing Cover Diffuser Pump shroud Shaft Impeller Motor stool O-ring Spacer sleeve Bearing sleeve Bearing Baseplate Tie bolt Nut Circlip 1.4301 JL 1040 EPDM 1.4301 1.4301 1.4301 1.4301 1.4301 1.4301 1.4305 1.4301 JL 1040
Material Movitec VS 1.4401 1.4404 1.4404 1.4404 1.4404 1.4401 1.4404 1.4408 VITON 1.4404 Tungsten carbide Ceramics -1.4057 1.4404 1.4571 -Movitec LHS 1.4408
Key to materials
Description Grey cast iron Chrome nickel steel Chrome nickel molybdenum steel Carbon chrome nickel molybdenum steel Chrome nickel molybdenum steel Chrome nickel steel Code and material No. JL1040 / GJL-250 1.4301 / X5CrNi18-10 1.4404 / X2CrNiMo 17-12-2 1.4408 / GX5CrNiMo19-11-2 1.4571 / X6CrNiMoTi17-12-2 1.4057+QT800 / X17CrNi16-2-QT800 1.4305 / X8CrNiS 18-9 1.4401 / X5CrNiMo 17-12-2 1.4308 / GX5CrNi 19-10 Please note: Material designations to ASTM/AISI are not binding. Standard EN 1561 EN 10088 EN 10088 EN 10213 EN 10088 EN 10088-3 EN 10088 EN 10088 EN 10283 to ASTM A48:40B A276:304 A276:316L A743CF8M A276:316 A276:431 A276:303 A276:316 A743:CF8
Bearings
All V , VS and LHS pumps are equipped with tungsten carbide plain bearings at the hydraulic rotor.
Material codes
Mechanical seal Description Primary ring Mating ring Elastomer Code letter to EN 12756 Q1 U3 B U3 E V X4 G G 13 14 15 16 17 19 Q1BEGG Q1BVGG U3U3X4GG U3U3VGG U3BVGG U3BEGG Material Silicon carbide (sintered without pressure) Tungsten carbide (CrNiMo binder) Hard carbon, resin-impregnated Tungsten carbide (CrNiMo binder) EPDM (ethylene propylene rubber) Fluoroelastomer (Viton) HNBR CrNiMo steel CrNiMo steel Silicon carbide / Hard carbon / EPDM Silicon carbide / Hard carbon / Viton Tungsten carbide/Tungsten carbide/HNBR Tungsten carbide/Tungsten carbide/Viton Tungsten carbide/Hard carbon/Viton (40-bar seal; for Movitec LHS only) Tungsten carbide / Hard carbon / EPDM
VF
= Round flange 2)
The sum of inlet pressure and shut-off head must not exceed the value indicated. Drilled to EN 1092-2 PN 25 (optional: ASME B 16.1 Class 250 or JIS B2238 16K) Subject to special application limits (see List of Fluids Handled) Drilled to EN 1092-2 PN 40 Movitec 24, 32 and 45 with motor ratings of 11 kW or higher: cartridge seals; Movitec 65 always with cartridge seal If fluid temperature > 80_C: PN 25, recommended elastomer -- EPDM
[mm] [mm] [mm] -- 4-pole 170 170 170 170 170 170 180 180 180 -- 2-pole 180 180 180 180 180 180 180 180 180
Movitec VF, VSF 24 1.1 -- 1.5 2.2 -- 4.0 5.5 -- 7.5 1.5 -- 2.2 3.0 -- 4.0 Motor flange B5 (5.5 and 7.5 kW) 5.5 -- 7.5
1)
47 116 969 47 116 970 47 116 971 47 116 972 47 116 973 47 116 974
For stage-dependent height dimension F2 refer to Movitec type series booklet, page 27ff 2) Not possible for Movitec LHS and PD
The set for horizontal installation includes 2 stainless steel holding brackets and the required fasteners. Foundation bolts must be supplied by the operator.
max. 13 mm for M12 Holding bracket (pump) 89-11.01 Holding bracket (motor) 89-11.02
Leak-free and resistant to thermal shocks Floating pump shroud Confined O-rings
Easy-to-fit shaft made of high-alloy steel, firm connection between shaft and impeller
Corrosion-resistant: Hydraulic components and pump shroud made of high-alloy stainless steel Movitec V with pump shroud made of CrNi sheet steel
High operating reliability ensured by torsion-proof pump shroud No external joints Only 2 sealing elements
Highly wear-resistant and maintenance-free plain bearing made of tungsten carbide/ceramics, lubricated by the fluid handled Self-cleaning by forced flushing
Simple installation and piping layout thanks to in-line design Insensitive to external nozzle forces and moments
Universal high-pressure pump up to 40 bar --15 _C to 120 _C Also suitable for chemically aggressive fluids Space saving vertical design Service-friendly, robust three-phase motor Multi-range voltage/frequency Enclosure IP 55 Thermal class F With PTC thermistor > 3 kW
Leak-free and resistant to thermal shocks Floating pump shroud Confined O-rings
Reliable and service-friendly shaft seal Standardised mechanical seal to EN 12756 Corrosion-resistant Hydraulic components and pump shroud made of high-alloy stainless CrNiMo sheet steel High operating reliability ensured by torsion-proof pump shroud No external joints Only 2 sealing elements
Easy-to-fit shaft made of high-alloy steel, flat shaft end ensures firm connection between shaft and impeller
Highly wear-resistant and maintenance-free plain bearing made of tungsten carbide/ceramics, lubricated by the fluid handled Self-cleaning by forced flushing
Simple installation and piping layout thanks to in-line design Insensitive to external nozzle forces and moments
Movitec A Casing
Pump casing with suction and discharge nozzles of identical nominal diameters arranged opposite to each other (in-line design). Movitec V(S): Pump casing made of stainless steel, baseplate made of powder-coated grey cast iron. Movitec LHS: stainless steel pump casing.
Installation
Vertical installation (horizontal installation see page 5)
Coating
Shaft seal
Uncooled, maintenance-free mechanical seal to EN 12756
Movitec V(S): Powder-coated grey cast iron motor stool and baseplate. Movitec V(S): Grey cast iron sliding flanges protected by sherardising. All pumps: Stainless steel parts without additional protective coating.
Drive
Tests/Inspections
Standard: Pressure test to EN 809 Leak test with water
Motor without speed control Standard for V(S) and LHS: -- Electric motor, 50 Hz, air-cooled, 2-pole and 4-pole, standard KSB motor with main dimensions to IEC. Other motor makes after prior consultation with KSB, up to 2.2 kW 220--240 V/380--420 V, from 3 kW 380--420 V/660--725 V, enclosure IP 55, thermal class F, up to 4 kW in V18 type of construction; from 5.5 kW in V1 type of construction, all motors >3 kW with PTC thermistors. Approved variants: -- Explosion-proof motor II 2 G Eexd/Eexe T3/T4, type of construction V1/V18, make to KSBs choice. -- Motor for mains voltage 500 V, type of construction V1/V18, make to KSBs choice. -- Motor make to customers choice (upon request). -- PTC thermistors for motors < 3 kW Direction of rotation: Clockwise, viewed from the drive end (see rotation arrow on motor stool). Coupling: -- All sizes: rigid coupling -- The couplings comply with the EC Machinery Directive. Motor with speed control system Standard for V(S) and LHS: -- Electric motor, 50 Hz, air-cooled, 2-pole and 4-pole, KSB standard motor with main dimensions to IEC. Other motor makes after prior consultation with KSB, 3~380 V AC --15 % to 480 V AC +10 % Enclosure IP 55, thermal class F, up to 4 kW in V18 type of construction; from 5.5 kW in V1 type of construction, all motors >3 kW with PTC thermistors. Approved variants: -- Motor make to customers choice (upon request). -- PTC thermistors for motors < 3 kW Direction of rotation: Clockwise, viewed from the drive end (see rotation arrow on motor stool). Coupling -- All sizes: rigid coupling -- The couplings comply with the EC Machinery Directive.
Possible variant (on request): Hydraulic test evidenced by test report. This test is always carried out using the original motor. The NPSH and the suction head are not measured. Materials testing Certificate of compliance with the order (corresponds to EN 10 204) In the certificate of compliance with the order the manufacturing or processing works confirms by way of an informal report without specifying test results that the delivery complies with the stipulations of the purchase order (certificate to 2.2 and 3.1 available upon request).
Characteristic curves 2)
The characteristic curves are based on the following principles: F Tolerances to ISO 9906 Class 2/Annex A F Measurements are made with standardised KSB motors with integrated frequency inverters 1) F The characteristic curves were obtained with deaerated water at a temperature of 20 C and a density of 1.0 kg/dm3 1) F The characteristic curves are valid for a kinematic viscosity of 1 mm2/s (1 cst) 1) F The pump is designed to give optimum performance at the point of best efficiency (Qopt). This means: F Recommended operating range: 0.50 to 1.30 of Qopt 2) F The characteristic curve outside this range is given for information purposes only 2). F A minimum flow must be maintained to prevent the pump from overheating. Movitec V 24 32 45 65 LHS 6
1) 2)
In case of different parameters, the performance data must be corrected accordingly. See example on the following page
Movitec A
The following curve shows the minimum flow, corresponding to a percentage of the optimum flow Qopt (flow rate at best efficiency point), as a function of the temperature of the fluid handled. Minimum flow
30 25 20 15 10 5 0 40 50 60 70 80 90 100 110 120
Q min [%]
F NPSH The NPSH values given in the individual characteristic curves are minimum values which correspond to the cavitation limit. They refer to deaerated water. A safety allowance of at least 0.5 m must be added when selecting the pump to compensate for measuring inaccuracies and minor manufacturing deviations. The NPSH curve reflects mean values.
Temperature [C] F Maximum pressure at the discharge nozzle: 25 bar -- shut-off head with round flange (VF) and Victaulic coupling (VSV). 40 bar -- shut-off head with round flange (LHS).
18 7,5 kW
Qmin
NPSH required. A safety allowance of 0.5 m must be added to the NPSH value of the characteristic curve when selecting the system.
10
Control task: Maintaining the differential supply pressure even with changing operating conditions and interferences.
Power saving
1217:31
Full load
1217:32
Full load
11
Performance chart
A pumps NPSH changes depending on the respective H/Q curve. However, the NPSH of the pump at maximum speed (or maximum frequency) must always be taken into account and used as calculation basis.
PumpDrive
Standard functions: -- Diagnostic LEDs signal operation, overload or fault -- Increased starting torque -- Pump-specific 1) minimum and maximum speeds -- Two isolated analog inputs for standard signals / live-zero yes/no 1) -- Automatic restart after automatic safety tripping yes / no1) -- Three restarting attempts within 3 seconds each 1) -- Modes of operation: open-loop control/differential pressure control by integrated PI controller with automatic detection -- Direction of rotation: anti-clockwise/clockwise 1) -- External standard signal 0/2 -- 10 V / 0/4 -- 20 mA -- General fault message contact (240 V AC, max. 1 A) -- Pump is stopped when flow rate falls below a minimum value -- Setpoint specified via motor potentiometer function
1)
Protective functions: -- Electronic overcurrent trip -- Integrated EMC (electromagnetic compatibility) filter, class B <7.5 kW, class A >11 kW -- Automatic overload control -- Thermal overload control -- Full motor protection by PTC thermistors -- Undervoltage/overvoltage protection -- Phase short-circuit protection -- Earth fault current protection -- Dry running protection -- Start/Stop via digital input -- No motor protection or mains switch required For details please refer to type series booklet PumpDrive 4070.5-10
12
Movitec A Recommended spare parts stock for two years continuous operation
Number of pumps of identical size (including stand-by pumps) Part No. Description 10-5 Stage casing, cpl. with bearing kit Stage casing with bearing (108.02) + bearing sleeve (529) + impeller (230) + spacer sleeve, short (525.01) 1 Mechanical seal 433 2 O-rings 412.01 2 Gaskets (oval) 400 (for pumps with V flange variant only) 1 O-ring 412.05 (for cartridge seal only) 1 O-ring 412.06 (for cartridge seal only) 1 set --> 2 3 4 5 6 and 7 8 and 9 10 and more % 3 sets 30
433
1 set
2 sets
3 sets
30
13
17 ---LHS ----LHS -LHS ---LHS --LHS LHS -LHS -LHS -LHS LHS LHS LHS LHS -LHS
19 LHS ----LHS LHS LHS LHS LHS LHS LHS LHS -LHS ----LHS -LHS LHS ---LHS LHS -LHS --
10 10 3 5 10 25 20 min. 20
60 80 80 80 60 40 30 60
-V 1) V 1) -------------V 1) ---------------
80 60 60 60 40 30 80 80
1)
Only valid if all standard (brass) screw plugs of Movitec V are replaced by stainless steel screw plugs. Otherwise, a Movitec VS with the right seal must be used. 4) Fluid details required.
14
Movitec A
Fluid handled (see special conditions given at the end of the table) Lactic acid Liqueur Magnesium sulphate Maleic acid Miscella 4) Oil-water mixtures (without solids) Oils (without abrasive solids): Corn oil Cutting oil 4) Hydraulic oil 4) Linseed oil Linseed oil + 3 % H2SO4 Lubricating oil 4) Mineral oil 4) Peanut oil Rapeseed oil Salad oil 4) Silicone oil 4) Soybean oil Turpentine oil 4) Turbine oil (no SDF oils)4) Vegetable oils (H2SO4-free) 4) Paraffin(s) 4) Petroleum (without solids) Phosphoric acid Polyethylene glycol 4) Polyglycols 4) Potassium bicarbonate Potassium carbonate Potassium hydroxide Potassium nitrate Potassium sulphate Propyl alcohol (see isopropyl alcohol) Soda lye (see sodium hydroxide) Sodium carbonate Sodium hydroxide (soda lye) Sodium nitrate (non acidic) Sodium sulphate (non acidic) Spirits Sulphuric acid Tannic acid Tartaric acid Trisodium phosphate Turpentine (oil) (see oil, turpentine) 4) Vinegar (wine vinegar) 100 100 80 60 60 100 80 100 100 60 100 60 100 Max. content in % 40 10 10
Max. tempera- Mechanical seal variant ture in C 13 14 15
16 -------V 3) -------------------------------------
17 LHS LHS LHS -LHS LHS LHS -LHS LHS -LHS LHS LHS LHS LHS LHS LHS LHS LHS LHS LHS LHS -LHS LHS ----LHS --------LHS LHS -LHS --
60 60 80 60 60
10 25 5 10 3
80 20 80 80 60 60 60 30 20 80 60 60 60 60 60 30 80 60 80 60 60
6 10 10 5 5 20 8 4 10
1)
Only valid if all standard (brass) screw plugs of Movitec V are replaced by stainless steel screw plugs. Otherwise, a Movitec VS with the right seal must be used. 3) Pure fluid without abrasive solids. 4) Fluid details required.
15
Movitec A
Fluid handled (see special conditions given at the end of the table) Water-glycol mixture (salt-free, with inhibitors) Water: Condensate Cooling water Decarbonised water Deionised water Distilled water Drinking water Fire-fighting water Fully desalinated water (see deionised water) Heating water Partly desalinated water (see decarbonised Pure water (chemically neutral, no ultrapure water) Rinsing water Seawater (continuous operation) Softened water (see decarbonised water) Swimming pool water (no brine) Untreated water (suspended solids content < 20 ppm) Tap water Wine (white, red)
1)
17 ---------------LHS --LHS
---------------VS ----
water)
40
Only valid if all standard (brass) screw plugs of Movitec V are replaced by stainless steel screw plugs. Otherwise, a Movitec VS with the right seal must be used. 2) Water treatment shall be in accordance with VdTV guidelines for feed and boiler water in steam systems of up to 64 bar. The penetration of air into the system must be avoided by all means.
16
Movitec A Movitec V with KSB standard motor, fixed/variable-speed 1) 3~230/400 V up to 2.2 kW, 3 kW and above: 3~400/692 V
Size
Number of stages
Motor rating kW
Pump Drive 1) Type ..001K10.. ..001K10.. ..001K50.. ..002K20.. ..002K20.. ..004K00.. ..004K00.. ..004K00.. ..004K00.. ..005K50.. ..005K50.. ..005K50.. ..007K50.. ..002K20.. ..004K00.. ..005K50.. ..007K50.. ..011K00.. ..011K00.. ..015K00.. ..015K00.. ..018K50.. ..018K50.. ..018K50.. ..022K00.. ..002K20.. ..004K00.. ..005K50.. ..007K50.. ..011K00.. ..011K00.. ..011K00.. ..015K00.. ..015K00.. ..018K50.. ..018K50.. ..022K00.. ..022K00.. ..030K00.. ..030K00.. ..030K00.. ..030K00.. ..037K00.. ..037K00.. ..037K00.. ..004K00.. ..005K50.. ..011K00.. ..011K00.. ..015K00.. ..015K00.. ..018K50.. ..022K00..
Max. current Oval flange Movitec V Fixed-speed Fixed-speed pump pump Imax in A Ident. No. kg 5.2 5.2 7.1 9.0 9.0 8.1 8.1 9.9 9.9 12.0 12.0 12.0 16.0 10.4 9.0 12.0 15.5 30.5 30.5 31.7 31.7 40.5 40.5 40.5 44.5 10.4 9.0 12.0 15.5 30.5 30.5 30.5 31.7 31.7 40.5 40.5 44.5 44.5 56.1 56.1 56.1 56.1 65.5 65.5 65.5 7.0 12.0 30.5 30.5 31.7 31.7 40.5 44.5 / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / 3.0 3.0 4.1 5.2 5.2 4.7 4.7 5.7 5.7 6.9 6.9 6.9 9.2 6.0 5.2 6.9 8.9 17.6 17.6 18.3 18.3 23.4 23.4 23.4 25.7 6.0 5.2 6.9 8.9 17.6 17.6 17.6 18.3 18.3 23.4 23.4 25.7 25.7 32.4 32.4 32.4 32.4 37.8 37.8 37.8 4.1 6.9 17.6 17.6 18.3 18.3 23.4 25.7 -----------------------------------------------------------------------------------------------------------
Round flange Movitec VF Fixed-speed pump Ident. No. 47 110 071 47 110 072 47 110 073 47 110 074 47 110 075 47 110 076 47 110 077 47 110 078 47 110 079 47 110 080 47 110 081 47 110 082 47 110 083 47 110 108 47 110 109 47 110 110 47 110 111 47 110 112 47 110 113 47 110 114 47 110 115 48 894 051 47 110 117 47 110 118 47 110 119 47 110 140 47 110 141 47 110 142 47 110 143 47 110 144 47 110 145 47 110 146 47 110 147 47 110 148 47 110 149 47 110 150 47 110 151 47 110 152 47 110 153 47 110 154 47 110 155 47 110 156 47 110 157 47 110 158 47 110 159 47 110 176 47 110 177 48 894 061 47 110 179 47 110 180 47 110 181 47 110 182 47 110 183 kg 57.8 60.1 64.5 73.8 76.2 82.5 84.9 94.2 96.6 115.5 117.8 120.2 138.1 60.9 81.1 89.5 95.8 167.1 169.4 185.7 188.0 205.0 207.5 209.8 247.9 61.9 80.0 88.3 92.4 163.7 163.8 166.1 180.1 182.5 197.5 199.9 235.8 238.1 362.2 364.5 364.6 366.9 367.0 369.3 369.4 78.1 96.5 170.0 173.5 190.9 194.3 212.7 252.1
4-pole
Movitec V 24 Movitec V 24 Movitec V 24 Movitec V 24 Movitec V 24 Movitec V 24 Movitec V 24 Movitec V 24 Movitec V 24 Movitec V 24 Movitec V 24 Movitec V 24 Movitec V 24 1 2 3 4 5 6 7 8 9 10 11 12 16 1 2 3 4 5 6 7 8 9 10 11 12 1--1 1 2--1 2 3--1 3 4--1 4 5--1 5 6--1 6 7--1 7 8--1 8 9--1 9 10--1 10 1 2 3 4 5 6 7 8 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 1.1 1.1 1.5 2.2 2.2 3 3 4 4 5.5 5.5 5.5 7.5 2.2 4 5.5 7.5 11 11 15 15 18.5 18.5 18.5 22 2.2 4 5.5 7.5 11 11 11 15 15 18.5 18.5 22 22 30 30 30 30 37 37 37 3 5.5 11 11 15 15 18.5 22
2-pole
Movitec V 32 Movitec V 32 Movitec V 32 Movitec V 32 Movitec V 32 Movitec V 32 Movitec V 32 Movitec V 32 Movitec V 32 Movitec V 32 Movitec V 32 Movitec V 32 Movitec V 45 Movitec V 45 Movitec V 45 Movitec V 45 Movitec V 45 Movitec V 45 Movitec V 45 Movitec V 45 Movitec V 45 Movitec V 45 Movitec V 45 Movitec V 45 Movitec V 45 Movitec V 45 Movitec V 45 Movitec V 45 Movitec V 45 Movitec V 45 Movitec V 45 Movitec V 45 Movitec V 65 Movitec V 65 Movitec V 65 Movitec V 65 Movitec V 65 Movitec V 65 Movitec V 65 Movitec V 65
1)
Voltage for variable-speed motors generally 3~400 V, currents see type series booklet 4070.5-10
17
Movitec A Movitec V with KSB standard motor, fixed/variable-speed 1) 3 kW and above: 3~230/400 V
Size
Number of stages
Motor rating kW
Pump Drive 1) Type ..004K00.. ..004K00.. ..004K00.. ..004K00.. ..005K50.. ..005K50.. ..005K50.. ..007K50.. ..004K00.. ..005K50.. ..007K50.. ..011K00.. ..011K00.. ..015K00.. ..015K00.. ..018K50.. ..018K50.. ..018K50.. ..022K00.. ..004K00.. ..005K50.. ..007K50.. ..011K00.. ..011K00.. ..011K00.. ..015K00.. ..015K00.. ..018K50.. ..018K50.. ..022K00.. ..022K00.. ..003K00.. ..005K50.. ..011K00.. ..011K00.. ..015K00.. ..015K00.. ..018K50.. ..022K00.. ..030K00..
Max. current Oval flange Movitec V Fixed-speed Fixed-speed pump pump Imax in A Ident. No. kg 14.0 14.0 17.2 17.2 20.8 20.8 20.8 27.7 15.6 20.8 26.8 52.8 52.8 54.9 54.9 54.9 70.1 70.1 77.1 15.6 20.8 26.8 52.8 52.8 52.8 54.9 54.9 70.1 70.1 77.1 77.1 12.1 20.8 52.8 52.8 54.9 54.9 70.1 77.1 77.1 / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / 8.1 8.1 9.9 9.9 12.0 12.0 12.0 16.0 9.0 12.0 15.5 30.5 30.5 31.7 31.7 31.7 40.5 40.5 44.5 9.0 12.0 15.5 30.5 30.5 30.5 31.7 31.7 40.5 40.5 44.5 44.5 7.0 12.0 30.5 30.5 31.7 31.7 40.5 44.5 44.5 ---------------------------------------------------------------------------------
Round flange Movitec VF Fixed-speed pump Ident. No. 47 110 063 47 110 064 47 110 065 47 110 066 47 110 067 47 110 068 47 110 069 47 110 070 47 110 097 47 110 098 47 110 099 47 110 100 47 110 101 47 110 102 47 110 103 48 894 050 47 110 105 47 110 106 47 110 107 47 110 128 47 110 129 47 110 130 47 110 131 47 110 132 47 110 133 47 110 134 47 110 135 47 110 136 47 110 137 47 110 138 47 110 139 47 110 167 47 110 168 48 894 060 47 110 170 47 110 171 47 110 172 47 110 173 47 110 174 48 894 072 kg 82.5 84.9 94.2 96.6 115.5 117.8 120.2 138.1 81.1 89.5 95.8 167.1 169.4 185.7 188.0 205.0 207.5 209.8 247.9 80.0 88.3 92.4 163.7 163.8 166.1 180.1 182.5 197.5 199.9 235.8 238.1 78.1 96.5 170.0 173.5 190.9 194.3 212.7 252.1 329.0
4-pole
Movitec V 24 Movitec V 24 Movitec V 24 Movitec V 24 Movitec V 24 Movitec V 24 Movitec V 24 Movitec V 24 6 7 8 9 10 11 12 16 2 3 4 5 6 7 8 9 10 11 12 1 2--1 2 3--1 3 4--1 4 5--1 5 6--1 6 7--1 1 2 3 4 5 6 7 8 9 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 3 3 4 4 5.5 5.5 5.5 7.5 4 5.5 7.5 11 11 15 15 18.5 18.5 18.5 22 4 5.5 7.5 11 11 11 15 15 18.5 18.5 22 22 3 5.5 11 11 15 15 18.5 22 30
2-pole
Movitec V 32 Movitec V 32 Movitec V 32 Movitec V 32 Movitec V 32 Movitec V 32 Movitec V 32 Movitec V 32 Movitec V 32 Movitec V 32 Movitec V 32 Movitec V 45 Movitec V 45 Movitec V 45 Movitec V 45 Movitec V 45 Movitec V 45 Movitec V 45 Movitec V 45 Movitec V 45 Movitec V 45 Movitec V 45 Movitec V 45 Movitec V 65 Movitec V 65 Movitec V 65 Movitec V 65 Movitec V 65 Movitec V 65 Movitec V 65 Movitec V 65 Movitec V 65
*) Available as variant (Factory Option) 1) Voltage for variable--speed motors generally 3~400 V, currents see type series booklet 4070.5-10
18
Movitec A Movitec VS with KSB standard motor, fixed/variable-speed 1) 3~230/400 V up to 2.2 kW, 3 kW and above: 3~400/692 V
Size
Number of stages
Motor rating kW
Pump Drive 1) Type ..001K10.. ..001K10.. ..001K50.. ..002K20.. ..002K20.. ..004K00.. ..004K00.. ..004K00.. ..004K00.. ..005K50.. ..005K50.. ..005K50.. ..007K50.. ..002K20.. ..004K00.. ..005K50.. ..007K50.. ..011K00.. ..011K00.. ..015K00.. ..015K00.. ..018K50.. ..018K50.. ..018K50.. ..022K00.. ..002K20.. ..004K00.. ..005K50.. ..007K50.. ..011K00.. ..011K00.. ..011K00.. ..015K00.. ..015K00.. ..018K50.. ..018K50.. ..022K00.. ..022K00.. ..030K00.. ..030K00.. ..030K00.. ..030K00.. ..037K00.. ..037K00.. ..037K00.. ..004K00.. ..005K50.. ..011K00.. ..011K00.. ..015K00.. ..015K00.. ..018K50.. ..022K00.. ..030K00..
Max. current Oval flange Movitec VS Fixed-speed Fixed-speed pump pump Imax in A Ident. No. kg 5.2 5.2 7.1 9.0 9.0 8.1 8.1 9.9 9.9 12.0 12.0 12.0 16.0 10.4 9.0 12.0 15.5 30.5 30.5 31.7 31.7 40.5 40.5 40.5 44.5 10.4 9.0 12.0 15.5 30.5 30.5 30.5 31.7 31.7 40.5 40.5 44.5 44.5 56.1 56.1 56.1 56.1 65.5 65.5 65.5 7.0 12.0 30.5 30.5 31.7 31.7 40.5 44.5 56.1 / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / 3.0 3.0 4.1 5.2 5.2 4.7 4.7 5.7 5.7 6.9 6.9 6.9 9.2 6.0 5.2 6.9 8.9 17.6 17.6 18.3 18.3 23.4 23.4 23.4 25.7 6.0 5.2 6.9 8.9 17.6 17.6 17.6 18.3 18.3 23.4 23.4 25.7 25.7 32.4 32.4 32.4 32.4 37.8 37.8 37.8 4.1 6.9 17.6 17.6 18.3 18.3 23.4 25.7 32.4 -------------------------------------------------------------------------------------------------------------
Round flange Movitec VSF Fixed-speed pump Ident. No. 47 110 637 47 110 638 47 110 639 47 110 640 47 110 641 47 110 642 47 110 643 47 110 644 47 110 645 47 110 646 47 110 647 47 110 648 47 110 649 47 110 674 47 110 675 47 110 676 47 110 677 47 110 678 47 110 679 47 110 680 47 110 681 48 894 053 47 110 683 47 110 684 47 110 685 47 110 705 47 110 706 47 110 707 47 110 708 47 110 709 47 110 710 47 110 711 47 110 712 47 110 713 47 110 714 47 110 715 47 110 716 47 110 717 47 110 718 47 110 719 47 110 720 47 110 721 47 110 722 47 110 723 47 110 724 47 110 741 47 110 742 48 894 063 47 110 744 47 110 745 47 110 746 47 110 747 47 110 748 47 110 749 kg 57.8 60.1 64.5 73.8 76.2 82.5 84.9 94.2 96.6 115.5 117.8 120.2 138.1 60.9 81.1 89.5 95.8 167.1 169.4 185.7 188.0 205.0 207.5 209.8 247.9 61.9 80.0 88.3 92.4 163.7 163.8 166.1 180.1 182.5 197.5 199.9 235.8 238.1 362.2 364.5 364.6 366.9 367.0 369.3 369.4 78.1 96.5 170.0 173.5 190.9 194.3 212.7 252.1 255.5
Victaulic coupling Movitec VSV Fixed-speed pump Ident. No. ------------------------------------------------------kg -------------------------------------------------------
4-pole
Movitec VS 24 Movitec VS 24 Movitec VS 24 Movitec VS 24 Movitec VS 24 Movitec VS 24 Movitec VS 24 Movitec VS 24 Movitec VS 24 Movitec VS 24 Movitec VS 24 Movitec VS 24 Movitec VS 24 1 2 3 4 5 6 7 8 9 10 11 12 16 1 2 3 4 5 6 7 8 9 10 11 12 1--1 1 2--1 2 3--1 3 4--1 4 5--1 5 6--1 6 7--1 7 8--1 8 9--1 9 10--1 10 1 2 3 4 5 6 7 8 9 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 1.1 1.1 1.5 2.2 2.2 3 3 4 4 5.5 5.5 5.5 7.5 2.2 4 5.5 7.5 11 11 15 15 18.5 18.5 18.5 22 2.2 4 5.5 7.5 11 11 11 15 15 18.5 18.5 22 22 30 30 30 30 37 37 37 3 5.5 11 11 15 15 18.5 22 30
2-pole
Movitec VS 32 Movitec VS 32 Movitec VS 32 Movitec VS 32 Movitec VS 32 Movitec VS 32 Movitec VS 32 Movitec VS 32 Movitec VS 32 Movitec VS 32 Movitec VS 32 Movitec VS 32 Movitec VS 45 Movitec VS 45 Movitec VS 45 Movitec VS 45 Movitec VS 45 Movitec VS 45 Movitec VS 45 Movitec VS 45 Movitec VS 45 Movitec VS 45 Movitec VS 45 Movitec VS 45 Movitec VS 45 Movitec VS 45 Movitec VS 45 Movitec VS 45 Movitec VS 45 Movitec VS 45 Movitec VS 45 Movitec VS 45 Movitec VS 65 Movitec VS 65 Movitec VS 65 Movitec VS 65 Movitec VS 65 Movitec VS 65 Movitec VS 65 Movitec VS 65 Movitec VS 65
1)
Voltage for variable-speed motors generally 3~400 V, currents see type series booklet 4070.5-10
19
Movitec A Movitec VS with KSB standard motor, fixed/variable-speed 1) 3 kW and above: 3~230/400 V
Size
Number of stages
Motor rating kW
Pump Drive 1) Type ..004K00.. ..004K00.. ..004K00.. ..004K00.. ..005K50.. ..005K50.. ..005K50.. ..007K50.. ..004K00.. ..005K50.. ..007K50.. ..011K00.. ..011K00.. ..015K00.. ..015K00.. ..018K50.. ..018K50.. ..018K50.. ..022K00.. ..004K00.. ..005K50.. ..007K50.. ..011K00.. ..011K00.. ..011K00.. ..015K00.. ..015K00.. ..018K50.. ..018K50.. ..022K00.. ..022K00.. ..003K00.. ..005K50.. ..011K00.. ..011K00.. ..015K00.. ..015K00.. ..018K50.. ..022K00..
4-pole
Movitec VS 24 Movitec VS 24 Movitec VS 24 Movitec VS 24 Movitec VS 24 Movitec VS 24 Movitec VS 24 Movitec VS 24 6 7 8 9 10 11 12 16 2 3 4 5 6 7 8 9 10 11 12 1 2--1 2 3--1 3 4--1 4 5--1 5 6--1 6 7--1 1 2 3 4 5 6 7 8 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 3 3 4 4 5.5 5.5 5.5 7.5 4 5.5 7.5 11 11 15 15 18.5 18.5 18.5 22 4 5.5 7.5 11 11 11 15 15 18.5 18.5 22 22 3 5.5 11 11 15 15 18.5 22
Max. current Oval flange Movitec VS Fixed-speed Fixed-speed pump pump Imax in A Ident. No. kg 14.0 14.0 17.2 17.2 20.8 20.8 20.8 27.7 15.6 20.8 26.8 52.8 52.8 54.9 54.9 70.1 70.1 70.1 77.1 15.6 20.8 26.8 52.8 52.8 52.8 54.9 54.9 70.1 70.1 77.1 77.1 12.1 20.8 52.8 52.8 54.9 54.9 70.1 77.1 / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / 8.1 8.1 9.9 9.9 12.0 12.0 12.0 16.0 9.0 12.0 15.5 30.5 30.5 31.7 31.7 40.5 40.5 40.5 44.5 9.0 12.0 15.5 30.5 30.5 30.5 31.7 31.7 40.5 40.5 44.5 44.5 7.0 12.0 30.5 30.5 31.7 31.7 40.5 44.5 -------------------------------------------------------------------------------
Round flange Movitec VSF Fixed-speed pump Ident. No. 47 110 629 47 110 630 47 110 631 47 110 632 47 110 633 47 110 634 47 110 635 47 110 636 47 110 663 47 110 664 47 110 665 47 110 666 47 110 667 47 110 668 47 110 669 48 894 052 47 110 671 47 110 672 47 110 673 47 110 693 47 110 694 47 110 695 47 110 696 47 110 697 47 110 698 47 110 699 47 110 700 47 110 701 47 110 702 47 110 703 47 110 704 47 110 732 47 110 733 48 894 062 47 110 735 47 110 736 47 110 737 47 110 738 47 110 739 kg 82.5 84.9 94.2 96.6 115.5 117.8 120.2 138.1 81.1 89.5 95.8 167.1 169.4 185.7 188.0 205.0 207.5 209.8 247.9 80.0 88.3 92.4 163.7 163.8 166.1 180.1 182.5 197.5 199.9 235.8 238.1 78.1 96.5 170.0 173.5 190.9 194.3 212.7 252.1
Victaulic coupling Movitec VSV Fixed-speed pump Ident. No. ---------------------------------------kg ----------------------------------------
2-pole
Movitec VS 32 Movitec VS 32 Movitec VS 32 Movitec VS 32 Movitec VS 32 Movitec VS 32 Movitec VS 32 Movitec VS 32 Movitec VS 32 Movitec VS 32 Movitec VS 32 Movitec VS 45 Movitec VS 45 Movitec VS 45 Movitec VS 45 Movitec VS 45 Movitec VS 45 Movitec VS 45 Movitec VS 45 Movitec VS 45 Movitec VS 45 Movitec VS 45 Movitec VS 45 Movitec VS 65 Movitec VS 65 Movitec VS 65 Movitec VS 65 Movitec VS 65 Movitec VS 65 Movitec VS 65 Movitec VS 65
*) Available as variant (Factory Option) 1) Voltage for variable-speed motors generally 3~400 V, currents see type series booklet 4070.5-10
20
2-pole
Movitec LHS 6 Movitec LHS 6 Movitec LHS 6 Movitec LHS 6 Movitec LHS 6 Movitec LHS 6 10 12 14 16 18 20 17 17 17 17 17 17 5.5 7.5 11 11 11 15
2-pole
Movitec LHS 6
1)
20
17
15
Voltage for variable-speed motors generally 3~400 V, currents see type series booklet 4070.5-10
21
9 18,5 kW
9 30 kW
3 11 kW
20 15 kW
14 11 kW
E1 A A A A A B B B B B B B B 176 176 176 194 194 194 194 233 233 266 266 266 266
E2 136 136 136 147 147 147 147 162 162 179 179 179 179
E3 286 286 286 286 286 286 286 305 305 328 328 328 328
F1 738 786 835 919 968 1016 1065 1121 1170 1297 1346 1394 1626
F2 458 506 555 603 652 700 749 797 846 914 963 1011 1205
1 2 3 4 5 6 7 8 9 10 11 12 16
PumpDrive
Model
C 158 170
A B
E1 A B B B C C C C C C C C 176 233 233 233 315 315 315 315 315 315 315 350
E2 136 162 162 162 206 206 206 206 206 206 206 225
E3 286 305 328 328 431 431 431 431 431 431 431 431
F1 733 830 904 980 1279 1327 1376 1424 1517 1565 1614 1711
F2 458 506 575 623 777 825 874 922 971 1019 1068 1116
1
PumpDrive
2 3 4 5 6 7 8 9 10 11 12
PumpDrive
Model
A B C
E1 A B B B C C C C C C C C C D D D D D D D 176 233 233 233 315 315 315 315 315 315 315 350 350 398 398 398 398 398 398 398
E2 136 162 162 162 206 206 206 206 206 206 206 225 225 323 323 323 323 323 323 323
E3 286 305 328 328 431 431 431 431 431 431 431 431 431 518 518 518 518 518 518 518
F1 733 782 855 883 1182 1182 1230 1230 1279 1323 1371 1420 1469 1524 1572 1572 1621 1621 1669 1669
F2 458 458 526 526 680 680 728 728 777 777 825 825 874 874 922 922 971 971 1019 1019
1-1 1-1
PumpDrive
2-1 2-1 3-1 3-1 4-1 4-1 5-1 5-1 6-1 6-1 7-1 7-1 8-1 8-1 9-1 9-1 10-1 10-1
PumpDrive
Model
Round flange PN 16 E1 B B B C C C C C C 194 233 233 315 315 315 315 350 350 E2 147 162 162 206 206 206 206 225 225 E3 286 328 328 431 431 431 431 431 431 F1 886 1008 1270 1389 1478 1567 1700 1838 1976 F2 570 679 768 887 976 1065 1154 1243 1332
1 2
PumpDrive
3 4 5 6 7 8 9
PumpDrive
Model
C 170 235
B C
E1 233 233 233 315 315 315 Dimensions A B 325 420 250 320
10 12
PumpDrive
B B B C C C
14 16 18 20
PumpDrive
Model
C 170 235
B C
Position 9
Position 6
Position 12
31
20010712--E
32
Movitec A
Part No. Description 10-6 101 108.04 160 171.01 171.02 171.03 210 230 230.01 230.02 341 411.01 412.01 412.02 412.03 412.04 412.05 412.06 433 471 500 509.01 509.02 525.01 525.03 525.04 525.05 525.06 525.07 529 554.01 560 681 800 862 890 901.01 903.01 903.02 904 905 914.01 914.02 914.03 920.01 920.02 920.03 930 932 Pump shroud Pump casing Stage casing, bottom Cover Diffuser Diffuser with ceramic bearing Diffuser, upper Shaft Impeller (for Movitec VF 24 and 32) Impeller (for Movitec VF 45) Impeller, half-head (for Movitec VF 45) Motor stool Joint ring O-ring O-ring O-ring O-ring O-ring O-ring Mechanical seal Seal cover Ring, cartridge Intermediate ring Intermediate ring, upper Spacer sleeve, short Spacer sleeve, long Spacer sleeve, end Spacer sleeve, seal Spacer sleeve, seal extension Spacer sleeve, cartridge Bearing sleeve Washer Pin Coupling guard Motor (> 5.5 kW 801 flanged motor) Coupling shell Baseplate, cast Hexagon head bolt Screw plug Screw plug Grub screw Tie bolt Hexagon socket head cap screw Hexagon socket head cap screw Hexagon socket head cap screw Nut Impeller nut with non-metal insert Nut Safety device Circlip, (1/2)
33
20000752--F
34
Movitec A
Part No. Description 10-6 101 160 171.01 171.02 210 230 341 411.01 412.01 412.02 412.04 412.05 412.06 433 471 500 509.01 509.02 509.03 525.01 525.02 525.03 525.04 525.05 525.07 529 550 554.01 554.04 560 681 722 801 862 890 901.01 901.04 903.01 903.02 904 905 914.01 914.02 914.03 920.01 920.02 920.03 920.05 930 932 Pump shroud Pump casing Cover Diffuser Diffuser with ceramic bearing Shaft Impeller Motor stool Joint ring O-ring O-ring O-ring O-ring O-ring Mechanical seal Seal cover Ring, cartridge Intermediate ring Intermediate ring, upper Intermediate ring, lower Spacer sleeve, short Spacer sleeve, middle Spacer sleeve, long Spacer sleeve, end Spacer sleeve, seal Spacer sleeve, cartridge Bearing sleeve Disc, lower Washer Washer Pin Coupling guard Taper piece, flanged Flanged motor Coupling shell Baseplate, cast Hexagon head bolt Hexagon head bolt Screw plug Screw plug Grub screw Tie bolt Hexagon socket head cap screw Hexagon socket head cap screw Hexagon socket head cap screw Nut Impeller nut with non-metal insert Nut Nut Safety device Circlip, (1/2)
35
20030238--B
36
Movitec A
Part No. Description 10-6 101 108.01 108.02 108.04 108.05 210 230 341 411.01 411.04 412.01 412.03 433 525.01 525.02 525.03 525.04 525.05 529 554.01 554.02 554.04 560 681 722 801 862 901.01 901.02 901.04 903.01 903.02 905 914.01 920.01 920.02 920.03 920.05 930 932 Pump shroud Pump casing Stage casing Stage casing with ceramic bearing Stage casing, lower Stage casing, upper Shaft Impeller Motor stool Joint ring Joint ring O-ring O-ring Mechanical seal Spacer sleeve, short Spacer sleeve, middle Spacer sleeve, long Spacer sleeve, end Spacer sleeve, seal Bearing sleeve Washer Washer Washer Pin Coupling guard Taper piece, flanged Motor Coupling shell Hexagon head bolt Hexagon head bolt Hexagon head bolt Screw plug Screw plug Tie bolt Hexagon socket head cap screw Nut Impeller nut with non-metal insert Nut Nut Safety device Circlip 37
Movitec A
38
Movitec A
39
Movitec A
KSB Aktiengesellschaft 67225 Frankenthal Johann-Klein-Str. 9 67227 Frankenthal (Germany) Tel. +49 6233 86-0 Fax +49 6233 86-3401 www.ksb.com
1798.5/5-10
1.2.2011