Beruflich Dokumente
Kultur Dokumente
Specifications
Capacities
Bucket Payload RAS Forks, Maximum Payload RAS Slewing Jib, Maximum Payload RAS Belt/Cable Reeler, Maximum Payload Maximum Un-braked Trailer Mass Maximum Braked Trailer Mass
kg lb 12 000 26,455
Max Cyl Lift Load
CL210B
LHD VEHICLE
Engine Speeds
8000 kg 17,636 lb 10 000 kg 22,046 lb 7000 kg 15,432 lb 7000 kg 15,432 lb 10 000 kg 22,046 lb Consult Caterpillar Low Idle High Idle 800 rpm 2,300 rpm
Fuel Consumption
At Full Power Average Mine Duty 39.4 L/hr 20-40 L/hr 10.4 gal/hr 5.3-10.6 gal/hr
Start System
Starter Motor Type Air Turbine Type
6000 13,228 4000 8,818 2000 4,409 0 0 0 0 7.8 200 15.7 400 23.6 600 31.5 800 39.4 1000 47.2 1200 55.1 1400 63.0 in 1600 mm
Load
Exhaust Conditioner
Type Make Exhaust Filter Exhaust Flame Trap Aftertreatment 3.5 m3 2.7 m3 4.6 yd3 3.5 yd3 Flameproof Wet Caterpillar Replaceable Element Except China Replaceable China and RSA Catalytic Exhaust Purifier
Transmission
Type Speeds, Forward and Reverse Power Shift with Forward/Reverse 4
Weight
Unladen with Full Tanks and Bucket Laden with Forks and 10T Load 19 000 kg 29 000 kg 41,887 lb 63,934 lb
Wheels
Make/Model 5 Pieces (Heavy Duty)
Pneumatic System
Compressor Type Air Flow Governed Pressure Relief Pressure Air Receiver Volume Piston Engine Gear Driven 0.340 m3/min (1.2 ft3/min) @ 1,500 rpm 800 kPa 116 psi 830 kPa 120 psi 150 L 40 gal
116 psi
Hydraulic Filtration
Bucket System Steer/Brake System Return 10 Micron Replaceable with Bypass Pressure 10 Micron Replaceable with Bypass
Vehicle Speeds
1st Gear 2nd Gear 3rd Gear 4th Gear
kN lbf
Articulation
Degrees of Turn Either Side 43 Degree
300 67,450
Oscillation
Tractive Effort
250 56,200
1st
7.5 Degree
2nd
Seating (Driver)
Type Cross-seated
3rd
4th
Canopy
Type Protective Device ROPS/FOPS
0 0
3.10 5
6.21 10
9.32 15
12.43 20
15.53 25
18.64 30
mph km/h
Speed
Electrical System
Type Voltage Polarity Approved Flameproof 12V Floating Chassis
Grade Ability
Front to Rear Side to Side (Empty) Side to Side (Loaded)
60 50 40
1st
Shutdown System
System Type Standard Shutdowns DCS Electronic Intrinsically Safe Approved Low Engine Oil Pressure Exhaust Temperature Engine Coolant Level Engine Coolant Temperature Turbo Temperature Scrubber Level 1 Scrubber Level 2 High Methane Low Hydraulic Oil Exhaust Scrubber Temperature
% Grade
2nd
30
3rd
20
4th
10 0
Optional Shutdowns
0 0
3.10 5
6.21 10
9.32 15
12.43 20
15.53 25
Speed
Service Capacities
Hydraulic Tank Fuel Tank Main Air Receiver Transmission/Converter Oil Engine Crankcase Oil (with Filter) Engine Cooling System Water Axle Oil (Each) Water Make Up Tank 250 L 200 L 150 L 40 L 25 L 72 L 60 L 450 L 66 gal 53 gal 40 gal 10.6 gal 6.6 gal 19 gal 15.9 gal 118.9 gal
Lights
Number/Location 2 Front, 2 Rear Approved Flameproof
Alternator
Drive Type Hydraulic Approved Flameproof
15 3 31 10 4 6
11 12
15 43
7 8 9
The Cat CL210 comes standard with the Rapid Attachment System (RAS) for rapid pick up and release of attachments.
OPTIONAL EQUIPMENT
10 000 kg (22,046 lb) Forks with Side Shift 7000 kg (15,432 lb) Slewing Jib Crane 3.5 m3 (4.6 yd3) Bucket Spade or Straight Lip 5 m (6.5 yd3) Bucket (Direct Mount) General Purpose Trailer
Pipe Trailer Power Assist Ready 7000 kg (15,432 lb) Belt/Cable Reeler 10 000 kg (22,046 lb) Manual Side Shift Forks Work Platform
Fuel Pod Concrete Kibble Trailer Towing Adapter (SH150) Trailer Power Assist (SH150)
For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at www.cat.com 2012 Caterpillar All Rights Reserved Printed in U.S.A. Materials and specifications are subject to change without notice. Featured machines in photos may include additional equipment. See your Cat dealer for available options. CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, Caterpillar Yellow and the Power Edge trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
AEHQ6805 (11-12)