Beruflich Dokumente
Kultur Dokumente
BGSN Single board introduction list Slot Panel board RNC Function single board Name DTB Remarks
Front Panel
Front Panel
APBE
9, 10 11
GUIM GIPI3
15
Front Panel
RUB
17
Front Panel
APBI
32 * E1 physical interface Support inning with channel associated signaling by CAS and Common Channel Signaling CCS channel pass-through Support extract 8K synchronous clock from the line, and sent through a cable to a clock generator board CLKG as a clock reference 4 * STM-1 ATM interface, four STM-1 ATM networking needs behalf On behalf of the original ASC; Support 622M exchange capacity, is responsible for the completion of the RNC system STM-1 physical interface AAL2 The end and AAL5, AAL2 and AAL5 SAR (2K VC, 8K CID); ATM OAM functions; the completion of SSCOP and SSCF processing,; M755 CPU daughter card. responsible for resource box of the control plane and the user plane data exchange Gigabit IP interface board provides IP transport mode optical interface and OMCB of function. provide maximum the 8x100M Ethernet interface, 2x Gigabit Ethernet interfaces: a Gigabit (External) optical port, a Gigabit electrical interface (supporting master and slave trade), 4 100M Ethernet Network port (internal user plane to support the active and standby), four 100M Ethernet port (external) Complete user plane protocol processing: CS business FP / MAC / RLC / luUP protocol stack processing PS business FP / MAC / RLC / PDCP / an IuUP / GTP-U processing Uu port to the signaling data processing 17 of front panel IMA / ATM protocol processing board APBI applied to the RNC IUB, IUR, IUCS, IUPS Interface with digital trunk board DTB support
Remarks
Front Panel
9,10
Front Panel
UIMC ROMB
CLKG
IU / IUR / IUB / Uu interface corresponding to the RNC side RANAP / RNSAP / NBAP / RRC protocol; NO.7 signaling processing Responsible for the control box control surface data exchange Responsible for the RNC system of global process treatment Responsible for the operation and maintenance of the entire RNC processing the single board state management and information collection, maintenance of the global nature of the entire RNC Static data ROMB may also run RPU is responsible for the routing protocol processing module CLKG board RNC system clock boards. CLKG card provides 1 +1 active and standby Design. through 485 console communication; background or manually select the reference source, including BITS, line (8K) GPS, local (two or three), and manual switchover can be shielded by the software; manually Select the reference order: 2Mbits1 - 2Mbits2 - 2MHz1 - 2MHz2 - 8K1 - 8K2 8K3 - NULL using loosely coupled phase-locked system fast catch (CATCH) tracking (TRACE) Hold (HOLD) and free-running (FREE) four operating modes; The output clock for the two bell;
RMNIC
THUB