Beruflich Dokumente
Kultur Dokumente
1/0
1/1
Selection guide
Applications
Pilot lights
b b b b b
Pushbuttons Mushroom head Emergency Stop buttons Selector switches and key switches Illuminated pushbuttons Pilot lights
Features
Products
Complete units or sub- Complete units or subassemblies assemblies (body + head) (body + head)
Monolithic
Bezel
Double insulated
Double insulated
Double insulated
Shape of head
Circular
Circular
8 and 12
22
22
22 and 25
Degree of protection
IP 40 IP 65 with seal
IP 65
IP 66
IP 66
IP 54
Cabling
Tags for 2.8 x 0.5 mm Faston connectors Screw clamp terminal connectors, Solder pins for connections or threaded connector printed circuit boards Connector With adaptor for printed circuit board
Screw clamp terminal Screw clamp connections terminal connections Connector With adaptor for printed circuit board
Mounting
18 mm
16 mm
16 mm Yes
16 mm Yes
Type references
XVL A
XB6
XB4
XB5
XB7 E
Pages
1/5
1/14 to 1/25
1/54 to 1/79
1/118 to 1/147
1/175
1/2
Joystick controllers
Cam switches
b Pushbuttons b 2 or 4 direction b Mushroom head Emergency b Stay put or spring return Stop buttons b Selector switches and key switches b Illuminated pushbuttons b Pilot lights
b Switches b Stepping switches b Reversing and changeover switches b Ammeter switches b Voltmeter switches b Reversing switches b Star-delta and reversing stardelta switches b Pole change switches
b 3 sizes of front panel for mounting 4, 8 or 12 22 mm control and signalling units b With/without location for Emergency Stop pushbutton b With/without printed circuit
Complete units or sub-assemblies Aluminium front panels for (body + front panel + head) mounting 22 mm control and signalling units, double insulated and metal
Double insulated
Circular
Double Metal, chromium plated or black insulated, Double insulated black Square
22
30
22
16 or 22: series K10 22 and multifixing: series K1/K2 4 holes, 48 or 68 centres: series K30K150
IP 65
IP 65
IP 66
IP 65
IP 65: series K10 IP 65 IP 40, IP 65 with seal: series K1/K2 IP 40: series K30K150 Screw and captive cable clamp connections
Connector
Screw and captive cable clamp Screw and captive cable clamp connections connections
15 mm Yes
16 mm Yes
ZA2 VA
9001 K, 9001 SK
XD4 PA
1/97
XD2 GA
1/183
XD5 PA
1/165
KTp
1/181
1/192 to 1/205
2/47
1/3
Presentation
1
1.1
This range of LED pilot lights meets the latest requirements in signalling techniques. Due to their small size, 8 and 12 fixing pilot lights are particularly suitable for the following applications: b Mounting on small control panels. b Shallow depth mounting. b Where a large number of signalling units are required on a control panel (low power dissipation). Small diameter LED pilot lights also have sealed front faces (IP 65 option available). An unsealed 8 mm fixing model with protruding LED and black bezel is however also available. Advantages: LED pilot lights have many advantages: b Very long life and low maintenance costs (bulb test procedure no longer required), b Highly resistant to shocks, vibrations, and overvoltage. b Low power consumption which, for example, allows direct compatibility with programmable controller outputs. b No sudden failures. Quick installation assisted by tag connectors suitable for soldered connections on 8 mm pilot lights, or by threaded connectors on 12 mm pilot lights. Safe connection due to integral ballast resistor and reverse polarity protection device.
Characteristics
Product certifications Protective treatment Ambient air temperature Standard version Operation Storage Conforming to IEC 536 and NF C 20-030 Conforming to IEC 529 and NF C 20-010 mA C C UL (Recognized), CSA TC - 25+ 70 - 40+ 70 Class III IP 40 (IP 65 with seal) 5 V: 25 12 V: 18 24 V: 18 48 V: 10 Ui: 50 V u 100 000 hours 0.8 Un y U y 1.1 Un Polarity marked +/, for 8 pilot lights, the "+ "corresponds to the longer tag Tags for 2.8 x 0.5 Faston connectors, or for soldered connections (dual purpose) Threaded connectors, capacity: min. 1 x 0.2 mm2, max. 1 x 1.5 mm2
Rated insulation voltage Service life Voltage limits including ripple (on c) Terminal referencing Cabling
Dimensions
Panel drilling LED pilot lights
XVL A1pp, A2pp fixing XVL A3pp
e M8x0,5
e M12x1
(1)
G 1,5
(mm) XVL A1pp XVL A2pp XVL A3pp min 8.2 8.2 12.2 G min 12.5 10.5 16.5 H min 12.5 10.5 16.5
(1)
10
12 c 6
45
(mm) c XVL A1pp 32 12 XVL A2pp 34 10 e = panel thickness: 1 to 8 mm (1) Tags for Faston connectors or soldered connections
1/4
References
References
Pilot lights with black bezel, protruding LED
Description 8 mm Degree of protection: v IP 40 (with integral ballast resistor and reverse polarity protection diode) Supply voltage c 5V Colour Green Red Yellow Green Red Yellow Green Red Yellow Green Red Yellow Reference XVL A113 XVL A114 XVL A115 XVL A123 XVL A124 XVL A125 XVL A133 XVL A134 XVL A135 XVL A143 XVL A144 XVL A145 Weight kg 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003
1
1.1
XVL A1pp
12 V
24 V
48 V
8 mm Degree of protection: v IP 40 v IP 65 with seal XVL Z911 (1) (with integral ballast resistor 12 V and reverse polarity protection diode)
IP 65 version 24 V
48 V
IP 40 version
XVL A3pp
12 mm 5V Degree of protection: v IP 40 v IP 65 with seal XVL Z912 (1) (with integral ballast resistor 12 V and reverse polarity protection diode)
Separate components
Description Tightening tools (sold singly) XVL Xpp Seals (IP 65) For use with 8 mm pilot lights 12 mm pilot lights 8 mm pilot lights 12 mm pilot lights XVL Z91p Other versions Sold in lots of 1 1 10 10 Unit reference XVL X08 XVL X12 XVL Z911 XVL Z912 Weight kg 0.015 0.030 0.001 0.001
8 and 12 mm LED pilot lights, without resistor, without reverse polarity protection diode (max. direct current: 30 mA c). Please consult your Regional Sales Office.
1/5