Beruflich Dokumente
Kultur Dokumente
Shanghai)
In this page, you will find common paddle flow switch, differential pressure flow switch, thermal flow switch, Flow Sensor
( Taiwan
Shanghai)
( Taiwan
Shanghai)
l l l l l
A 30 35 45
l Character
l l l l l l l l l l Max Voltage 250VAC Max Current 1A (50VA) Output SPDT Micro SwitchNormal Open is standard, N.C is optional Max Pressure 10 bar Work Medium Water, Seawater, Oil, Air (Other Medium is acceptable) Work Temperature 10100 Pressure Loss No Loss Protection Grade IP65 Cable 0.3mm22 , L1000mm Shell Material PPO
( Taiwan
Shanghai)
Specification: * Protection Grade IP65 * Media Temperature -20~93 * Max Static Pressure 10 Bar *Metering Substances Gas, Water, Oil * Install Position Horizontal or Vertica * Pipe Size DN15, DN20, DN25 *Output: 1A(Max) 250VAC/DC 50W(Max)
This products is produced by plastic material, used in Sea Water Heating Systerm, Water Purification Equipment, Welding Equipment, Laser Systerm, to measure or control the flow rate. The Magnet don't stay in the flow, so the magnet will not contact with the rust of the water flow, so could make sure the flow switch will be stability.
( Taiwan
Shanghai)
GE-312
GE312 Used in the Water Heating Systerm, Welding Equipment, Laser Systerm, instruments and meters, to measure or
control the flow rate. The Magnet don't stay in the flow, so the magnet will not contact with the rust of the water flow, so could make sure the flow switch will be stability. GE-312A only have a plastic magnet inside the body, it have less component, so it will be very stability. GE-312B and GE-312C is piston flow switch, it could installed by any postion
* Pipe Size GE-312A DN8 ~ DN32 GE-312B DN15 DN20 DN25 GE-312C DN20 * Install Position: GE-312A vertical GE-312B any position GE-312C any position * Outpout: GE-312A 70W max contact rating GE-312B 10W or 50W max contact rating GE-312C 70W max contact rating
* Protection Grade IP65 * Media Temperature -20~93 C * Max Static Pressure 10 Bar * Metering Substances Gas, Water, Oi, Sea Water (If special substances, please declare, OEM Custom-made is available)
When the flow is 1.8L/min ~~ 2.1L/min, the flow switch is Close When the flow is lower than 1.6L/min, the flow switch is Open.
( Taiwan
Shanghai)
Teflon PTFE Plastic Material High Performance in Chemical and Corrosion Environment Special Useful in SPA and Sea Water Appliance
Technology Data: * Protection Grade: IP65 (IP68 optional) * Media Temperature: -30~110 C * Output: SPST BMF Magnetic Switch (NO is standard, N.C is optional) * Max Volage: 350V DC; 300V AC * Max Switch Current: 1.0A * Max Carry Current: 2.5A * Contact Rating: 70VA *Metering Substances Gas, Water, Oil Character * No Pressure Loss * Proven paddle type in compact design, especially for serial applications. * Glass-fibre reinforced plastic ensures high stability * With pipe section or for push-in installation into manifolds of customer fittings * Long-term stable switching point, retreatment of paddle by magnetic force, no spring fatigue * Low Pressure Drop & Anti Corrosion environment to control flow, e.g. Swimmin Poll Heating Pump, Sea Water Pump, Central Heating Water Systerm
( Taiwan
Shanghai)
Teflon PTFE Plastic Material High Performance in Chemical and Corrosion Environment Special Useful in SPA and Sea Water Appliance
This PTFE Teflon Paddle flow switch could used in all kinds of corrosion condition, e.g. Paper mills, chemical plants, sewage treatment plant, washing plant, printing, printing and dyeing, electroplating plants, pharmaceutical plants * Protection Grade: IP65 (IP68 optional) * Media Temperature: -30~110 C * Output: SPST BMF Magnetic Switch (Normal Open is standard, N.C is optional) * Max Volage: 350V DC; 300V AC * Max Switch Current: 1.0A * Max Carry Current: 2.5A * Contact Rating: 70VA * Max Static Pressure: 10 Bar Low Pressure Drop & Anti Corrosion environment to control flow, e.g. Swimmin Poll Heating Pump, Sea Water Pump, Central Heating Water Systerm
( Taiwan
Shanghai)
GE-314
Specification 1. Medium Temperature : -30~125 C 2. Pressure Loss: 0.01bar at Qmax. 3.Hysteresis depending on switch value, 4.Metering Substances Oil, Water, Gas, Air 5.Max Pressure: 30bar (100bar available) 6.Protection Class: IP65 7.Install Position: Horizontal or Vertical 8. Pipe Size: BSP1/4~BSP1 Male & Female 9. Materials: Stainless Steel 10. Wire: PTFE Teflon AWG22
( Taiwan
Shanghai)
Adjustable Range for Flow Setpoint (L/min) 1st Range 1.4~2.0 3.3~4.4 5.8~7.8 9.1~12.3 14.8~20.1 23.2~31.4 36.2~49.0 2nd Range 2.0~2.6 4.4~5.9 7.8~10.6 12.2~16.5 20.0~27.1 31.3~42.3 48.8~66.1 3rd Range 2.4~3.2 5.3~7.2 9.4~12.8 14.7~19.9 24.1~32.7 37.7~51.0 59.0~79.8 4th Range 2.7~3.6 6.0~8.1 10.6~14.4 16.6~22.5 27.3~36.9 42.6~57.6 66.8~90.7 5th Range 3.7~5.0 8.4~11.3 14.9~20.1 23.2~31.4 38.1~51.5 59.5~80.5 93.0~125.8
* The adjustable range is for flow setpoint, not for max flow rate.
Email sales@ayite.net hongkong@ayite.net Website http://www.ayite1973.com http://www.ayite.net
( Taiwan
Shanghai)
Dimension Drawing:
Pipe Connection:
Installation:
Measuring Substance:
Option DN10 (3/8) ~ DN50 (2) Femal Thread; Male Thread, and others 1st range ~ 5th Range Hirschman DIN; Calble with sealing (1m 2x0.75m2) Custom-made OEM ODM is acceptable
( Taiwan
Shanghai) Explosion-proof
GE-316
GE-316 Paddle Flow Switch is specially designed for the Flow Monitoring of Water Source, Water-Loop Heat Pump Air Conditioning Systems and Heat Pump Water Heater. Instruments operate by a spring-supported paddel with magnetic triggering of a reed switch. Specification * Substance Temperature -45C ~ 125 C * Max Volage: 350V DC; 300V AC * Max Switch Current: 1.0A * Max Carry Current: 2.5A * Contact Rating: 70VA * Average Pressure Loss 0.01bar at Qmax. * Hysteresis depending on switch value * Metering Substances Oil, Water, Gas, Air * Max Pressure 25bar (40bar available) * Pipe Size DN10~DN80 * Materials Brass or Stainless Steel Character * Anti Explosion * Good repeatability * Low pressure loss * Dirt resistant * Hermetic separation of electrical and hydraulic components * Stress free fixation of switch unit by plastic cap
( Taiwan
Shanghai)
1. 2. 3. 4. 5. 6. 7. 8.
Media Temperature -20~85 C Average Pressure Loss 0.01bar at Qmax. Max Pressure 1.6M Pa Flow Rate1.5~30 L/Min Output: 1A(Max) 250VAC/DC 100W(Max) Protection Class IP65 Install Position Horizontal or Vertical(The Wire must be top) Materials Brass
1. 2. 3. 4. 5.
Max Pressure: 100Bar Work Temperature: -20~120 C Pipe Size: DN8~DN25 Voltage: 5-24V/200mA(AC/DC); 250V/120mA(AC/DC) Material: Stainless Steel
Email sales@ayite.net hongkong@ayite.net Website http://www.ayite1973.com http://www.ayite.net
( Taiwan
Shanghai)
GE-319
GE-319 Insert Paddle Flow Switch is specially designed for the Flow Monitoring of Water Source, Water-Loop Heat Pump Air Conditioning Systems and Heat Pump Water Heater. Instruments operate by a spring-supported paddel with magnetic triggering of a reed switch. Specification * Substance Temperature -45C ~ 125 C * Max Volage: 350V DC; 300V AC * Max Switch Current: 1.0A * Max Carry Current: 2.5A * Contact Rating: 70VA * Average Pressure Loss 0.01bar at Qmax. * Hysteresis depending on switch value * Metering Substances Oil, Water, Gas, Air * Max Pressure 25bar (40bar available) * Pipe Size DN15~DN400 * Materials Brass or Stainless Steel Character * Anti Explosion * Good repeatability * Low pressure loss * Dirt resistant * Hermetic separation of electrical and hydraulic components * Stress free fixation of switch unit by plastic cap
( Taiwan
Shanghai)
GE-340A
GE-340B
GE-340C
Specification
* Low Pressure Drop & Anti Corrosion environment to control flow, e.g. Swimmin Poll Heating Pump, Sea Water Pump, Central Heating Water Systerm * Less Pressure Loss * Proven paddle type in compact design, especially for serial applications. * Glass-fibre reinforced plastic ensures high stability * With pipe section or for push-in installation into manifolds of customer fittings * Long-term stable switchingpoint, retreatment of paddle by magnetic force, no spring fatigue Character * Connect Size: 1/2 * Voltage: 10VA 80V * Min Flow: 1L/min * Pipe Size: DN15~DN100 (GE-340A&B) 25mm 32mm 40mm 50mm (GE-340AD)
( Taiwan
Shanghai)
( Taiwan
Shanghai)
Character: Mechanical flow switch for liquid or gaseous media, with spring-supported piston and magnetic triggering of a reed switch. Rugged design in brass, but it is Nickel-plated, very beautiful outlook. Same as HONSBERG FW1-008GM006, FW1-010GM006, FW1-015GM006, but much lower price. * Minimal pressure loss * Good repeatability * High switch capability * Dirt-resistant * Hermetic separation of mechanical and electrical component Specification: * Flow Range: 0.6L/min ~ 8.0L/min; 1.0L/min ~ 15L/min * Pipe Size: 1/4 DN8; 3/8 DN10; 1/2 DN15 * Tolerance: 5% of full scale * Hysteresis: depend on switch position, Min.0.5L/Min * LED Indicater: DC indicate switch status; AC no LED * Mode of connection: Contact for locking plug M12 * Output: reed switch 24VDC/250VAC 100mA * Max Pressure: 100bar * Average pressure loss: 0.3bar at 25L/min * Substances temperature: -30C ~ +90C * Protection class: IP65 (IP67 available) Technology Data: Type GE-342G008 GE-342G010 GE-342G015 Max Pressure 100bar 100bar 100bar Max Flow 40L/min 40L/min 40L/min Adjustable Range 0.6~8L 0.6~8L 1~15L Thread G1/4 G3/8 G1/2