Beruflich Dokumente
Kultur Dokumente
DIVERTER
30. DIVERTER 30.1 FUNCTION - Description The Diverter is installed on the conductor pipe before drilling of first phase of the well and isdesigned to keep personnel and Rig safe.It consist of an annular type blow out preventer and is designed to divert shallow gas away fromthe well area while drilling surface hole.In doing so, the well remains open but diverting the pressure avoids fracturing a formation. - Manufacture specifications Diverter system are manufactured according to API 16A and RP 64.The relevant ISO standard is the 13533 Spec.ENI requirements are defined by "Well control policy" and an internal specification. 30.2 TYPICAL CONFIGURATION - Off-shore application (APIRP 64) Schematic arrangement foran off-shore application, asper API RP 64 recommendations.
apirigroup.com/diverter.html
1/9
11/25/13
DIVERTER
- Hydril example with SXVspool arrangement This integral type spoolwith diverter has theadvantage of remotecontrols, eliminating theuse of lateral valves.
apirigroup.com/diverter.html
2/9
11/25/13
DIVERTER
apirigroup.com/diverter.html
3/9
11/25/13
DIVERTER
-Typical configurationon Saipem's Rigs Typical configurationon Saipem's mediumand high power Rigs
apirigroup.com/diverter.html
4/9
11/25/13
DIVERTER
- Diverter Installations
- Diverter valve
apirigroup.com/diverter.html
5/9
11/25/13
DIVERTER
30.3 TYPES AND CHARACTERISTICS - Hydril MSP The 29 " Diverter is the most commonlyused.It allows the running of 27" bit.For fast moving type Rigs, uses the 20"annular BOPThe MSP 29-1/2"-500 requires onlyclosing pressure. Seal off is effected by hydraulic pressureapplied to the closing chamber whichraises the piston, moving the packing unit radially inward into a sealing engagement. Any normal closing unit having aseparate regulator valve for the annular BOP and sufficient accumulator volumecan be used to operate the MSP.
apirigroup.com/diverter.html
6/9
11/25/13
DIVERTER
- Table Data
apirigroup.com/diverter.html
7/9
11/25/13
DIVERTER
- Table Initial Closing Pressure (psi) Required for MSP 29-1/2-500 BOP / DIVERTER Closing Pressure 500 PSI Wellbore 12" ipe 959 psi 5" Pipe 1350 psi CSO 1500 psi
30.4 INSPECTIONS The Diverter System shall be inspected (modally and frequency) according to the manufacturer'srecommendations and as per API RP 53.ENI requirements are defined by an internal specification.
apirigroup.com/diverter.html
8/9
11/25/13
DIVERTER
apirigroup.com/diverter.html
9/9