Beruflich Dokumente
Kultur Dokumente
PURPOSE OF AUTOCLAVE
Liquids such as nutrient media and buffer solutions Solid items such as pipette tips, tubes and filters Glassware and plastic articles Biohazard sterilization
CONTROL AND DOCUMENTATION FEATURES In addition to a comprehensive LCD display: Password protection for operating machine. Independent temperature and pressure monitoring Cycle information recovery in the case of power failure or cycle interruption Fail Alert Indicating cycle failure or interruption Door Alert Indicating the door is unlocked RS 232 PC Connection Port for direct software updates and remote maintenance SAFETY FEATURES Door Safety Safety Valves Built-in Steam Generator Safety Safety alarms Drain Protection:
Specifications Temperature Range, Maximum w/Lid Temperature Accuracy at 37C Temperature Uniformity at 37C Temperature Stability at 37C Temperature Control/Display Electrical Requirements Resolution ft.Microprocessor PID Control
Ambient to 100C (212F) 0.5C 0.24C 0.5C PID/Digital ft. 120V 50/60Hz 0.1C
Lab Refrigerator
Dimensions: Interior: 52D x 27W x 18H Exterior: 65L x 32W x 29H Thermostat control of temperatures ranging from 1 to 8C with 3C stability Capacity, 17 cu. ft. (481L) Automatic defrost CFC-free (R404A) refrigerant, polyurethane insulation White enamel-coated steel cabinet, white epoxy powder-coated steel interior Solid door that has hinge mechanism that holds door open at 95 angle, closes with a gentle push Four adjustable legs that ensure cabinet is level on irregular floors fixed white epoxy-coated steel-wire shelves which can resist most acids, solvents, and chemicals; provide 13.5 sq. ft. of shelving
BIOSAFETY UNIT
Description: Designed for biological agents at Biosafety Levels 13 Class II, Type A2 Biological Safety Cabinet Packages 4 package, 120V 50/60Hz AC motored cabinet sloped front, bright workspace, and low noise level with Digital Airflow Verification features like UV light, electrical points, gas points Real-time airflow adjustments ensure inflow and downflow velocities remain steady Meet NSF/ANSI Standard 49 Pressure sensor filter monitoring that measures total airflow across the working area Proprietary front window design which simplifies cleaning for a safer working environment Indicator to adjust airflows as filter resistance changes SmartFlow visually demonstrates cabinet's ability to compensate to maintain personal protection
Analytical balance
Weighing Range: 120g Readability: 0.1mg Repeatability: 0.1mg Linearity: 0.2mg Including: Universal power adapter, USB data cable, in-use cover, application guide, dust cover Simple menu navigation and integrated applications at the touch of a key Clearly visible icons fully automatic internal calibration and balance adjustment connectivity to a printer or computer Level control: Glass level indicator with air bubble for centering Calibration: Internal, fully automatic calibration with configurable action level Weighing units: g, ct, mom, kg, lb, oz, ozt, tls, tlt, GN, dwt, mg, parts/lb, tlc, Kt, tol, bat, MS, N Stability indicator Tamper protection lock Housing protection: Acetone cleanable housing Language selection: English, French, Theft lock Output: Mini-USB Power: 120V 60 Hz Weight: 12 lbs Dimensions: 5 x 7 x 18
Large; Chamber capacity: 5.0 cu. ft. Power: 120V 30 to 75C (86 to 167F) range Incubators with gravity flow circulation Efficient heating for routine laboratory procedures: drying and staining of slides, microbiological determinations, and more. Electrical receptacle inside (5A at 120V) to plug in a stirrer, shaker or other apparatus. with two shelves Microprocessor control located at the top of the incubator chamber decrease set point temperature adjustments in 0.1C increments Over temperature value is automatically set at 3C above setpoint Circuit breaker protection; battery backup Heat and Alarm indicators Cabinet with durable, enamel-coated steel exterior Extruded aluminum trim has acrylic powder coating Large LED display Silicone gasket on outer door to prevent heat loss Outer door opens to 180 for unhindered access and features two grabber-type latches Inner door is tempered glass rubber feet to keep incubator from slipping and maintain a space between incubator and benchtop for ventilation Accessories: 25mL (60 each), 125 mL (9 each), 500 mL (8 each), 1L (4 each ) and 2 L ( 4 each) flask clamps. Microwell plate clamp
g force (rcf): 1003,000 x g (100 x g increments) Speed: 1004,400 rpm (in 100 rpm increments) Maximum capacity: 4 x 85 mL or 30 x 15 mL Number of rotors: 6 Acceleration time: <25 s Braking time: <25 s soft brake function Timer: 099 min, with continuous mode Power supply: 120 V/5060 Hz Dimensions: (W x D x H) 12.5 x 15.6 x 9.5 in/32 x 40 x 24 cm Height: with lid open 20.7 in/52.5 cm Weight: 44 lb/20 kg 4 x 85 mL swing-bucket rotor with round buckets 4 adapters for 15 mL conical tubes and 4 adapters for 50 mL conical tubes
TOC 5 ppb (g/L) Pyrogens (endotoxins) < 0.001 Eu/mL (pyrogen-free) after BioPak RNases < 0.01 ng/mL (RNase-free) after BioPak DNases < 4 pg/mL (DNase-free) after BioPak Microorganisms < 0.1 cfu/ml after Millipak or BioPak Particulates > 0.22 m < 1 particulate / mL after Millipak Express 40 Flow rate Adjustable from trigger: from 50 mL /min up to 2 L/min * Resistivity can be displayed temperature-compensated at 25 C or non-temperature-compensated as required by USP Ultrapure Water delivery Parameter Manual dispense flow rate Automatic dispense volume Volumetric dispense accuracy Volumetric dispense dispersion
Value Adjustable between 50 and 2000 mL/min 100 mL, then 250 mL to 5 L by 250 mL increments, then 5 L to 60 L by 1 L increments 3 % for volumes between 250 mL and 60 L CV < 3% for volumes between 250 mL and 60 L
Pure Water Quality Parameter Value Ions rejection 97 to 98% with new RO cartridge Organics Rejection > 99 % for MW > 200 Dalton Particulates & Bacteria > 99% Rejection Pure Water production and delivery Parameter Value Production Flow Rate 8 L/hour or 16 L/hour Delivery Flow rate From tap: up to 2.5 L/min From optional pump: up to 15 L/min at 1 bar Feed Water Specifications (*) Parameter Value Feed Water Quality Potable Tap Water Feed Feed Water Conductivity < 2000 S/cm @ 25C Feed Water TOC < 2000 ppb Feed Water Pressure 1 - 6 bar Feed Water Temperature 5 - 35C Feed Water Chlorine < 3 ppm Feed Water Fouling Index < 12 Feed water pH 4 to 10 pH units Feed Water Connection 1/2 in Gaz M (*) If some feed water are out of specifications, solutions exist to make it acceptable for Milli-Q Direct operation contact Millipore Tech Service for more information Product Dimensions
Q-POD Accessory Dimensions Parameter Q-POD height Q-POD diameter Dispenser delivery loop length Q-POD weight (packaged) Q-POD weight (empty) Q-POD weight (with water) Loop & cable to system length Data connection Parallel Port
Value 579 mm (23.50 in) 230 mm (9.05 in) 800 mm (31.49 in) 7.2 kg (15.87 lb) 5 kg (11.02 lb) 5.5 kg (12.12 lb) 290 cm (114.1 in) (25-pinD-Sub) for print-out
Accessories: Vent Filters for Pure Water Storage Reservoirs (TANKMPK01) Progard T3 Pack for RO cartridge Wall mounting bracket Wall mounting bracket Tank Water sensor for integral Sanitary tablets Millipore Q-pak TEX
Incubator shaker
Combined incubated/refrigerated temperatures with orbital shaking in a compact footprint. Designed to minimize bench space and are affordably priced. Ideal for cell culture, solubility studies, extraction procedures, protein expression and many other applications. Transparent lid Chamber holding atleast four 1L flasks Choose from two temperature ranges: incubated (5C above ambient to 80C) Monitor and control chamber temperature range with 0.1C accuracy at 37C Triple eccentric drive handles heavy loads, uniform agitation and continuous 24-hour operation, even at high speeds Over temperature safety feature with independent thermostat provides additional backup by controlling heat if main temperature controller fails Interlock stops platform when lid is opened LED displays for speed, time and temperature Variable speed control from 15 to 500rpm Continuous and timed operation from 0.1 hour up to 999 hours or 0.1 to 999 min. Shaker shutdown and audible/visual alarms signal temperature deviations or if unit operates 10% of set speed, preventing shaker from walking Soft-start feature for sudden starts and stops, splashing of vessel contents or wetting of flask closure Set point retention retains parameters during power failure and restarts unit automatically after power is restored Solid-state DC brushless motor is maintenance-free Operating Chiller Provides a refrigerated atmosphere For plasmid purification and protein expression in bacteria for use with MaxQ 4450 with cooling coil option Achieve temperature ranges from 20 to 30C
Specifications Temperature Accuracy Motor Chamber Capacity Orbit Platform L x W Platform Load Capacity Overall L x W x H Shipping Weight
0.1C at 37C Triple eccentric drive 4 x 1L flasks 0.75 in. (1.9cm) 11 x 13 in. (28 x 33cm) 35 lb. (15.9kg) 27.2 x 14.1 x 15.8 in. (69.1 x 35.8 x 40.1cm) 77 lb. (35kg)
2.5, 10, 20, 100, 200, 1000 microlitre pipettes Pipette stand One full rack of Pipette tips for each volume of pipettes
pH meter
pH/mV/C/F modes Includes meter pH/ATC plastic body refillable electrode liquid-filled, glass body combination pH Ag/AgCl Electrode ATC probe (13-620-19). Operational manual Power supply pH standards LCD display
HPLC
Item Flow rate setting range Flow rate accuracy LC-2010CHT LC-2010AHT 0.001 ~ 5 mL/min (1.0-35.0 MPa/145-5076psi) 1% (1mL/min, 3.0-10.0 MPa/435-1450psi, using water, and fixed ambient temperature of 20C , except during gradient solvent delivery), 2% (except for above conditions) or 2L/min, whichever is greater Up to 4 solvents 0 to 100%, 0.1% steps
Quaternary pump
LPGE
Sampler
Oven
Number of solvents and setting range Concentration accuracy Concentration precision Injection method Injection volume setting range Sample 1 ml vials capacity 1.5 ml vials 4 ml vials MTP DWP Injection repeatability Carry over Injection volume accuracy Injection volume correction Sample cooler (LC2010CHT) Type Temperature control precision Temperature control range Light source Wavelength range Bandwidth Wavelength accuracy Wavelength precision Drift Noise level Cell path length, cell volume
0.5% (aqueous acetone/water, binary gradient, flow rate 0.1-2.0mL/min, pressure 1.0-20.0MPa/145-2900psi) 0.1% (aqueous acetone/water, binary gradient, flow rate 0.1-2.0mL/min, pressure 1.0-20.0MPa/145-2900psi) Variable volume (without sample loss) 0.1-100L (standard), 1- 2000L in 1L steps) 350 140 100 4 96- or 384-well micro titer plates 4 96-well deep-well plates RSD<0.3% (with 10L injection) 0.01% (under naphthalene analysis conditions) 1 % (50L, n=6) Possible 4 to 40C using Peltier element Block heating/cooling with preheating of the mobile phase 0.1C (Ambient temperature -15C) to 60C Deuterium lamp 190 to 600nm 8nm 1nm 0.1nm 1 x 10-4 AU/h (250nm air cell) 0.25 x 10-5 AU (for response of 1s, 250nm, air cell) 10mm, 8L (STD flow cell), 5mm, 2.4L (semimicro flow cell)
Controller
Operating temperature range Power requirements Dimensions,Weight Computer Column Installing and training
Any two wavelengths from 190 to 370nm or 371 to 600nm Backlit liquid crystal display (320 x 240 dots), black and white 2 x external inputs, 2 x external outputs, 1 x optical link (for chromatopac), 1 x 4 to 35C AC 100V - 240V Compact and light weight enough to handle by two persons One dedicated PC to operate (25 inches monitor) C18 reverse phase and aminex carbohydrate column needed
Gas chromatography
Gas chromatography start up package, 230 V 60 Hz Detectors: FID and TCD Columns: columns for alcohol, organic acid, phenolic analysis etc Injection unit : Split/Splitless Injector module Flame Ionization Detector module Thermal Conductivity Detector module Approximate Instrument Dimensions and Weight Height: 18-3/8 in. (465 mm) Width: 25-7/8 in. (655 mm) Depth: 20-1/8 in. (511 mm) Weight: 90 pounds (41 kg) Operating range: 055 C ambient (2027 C optimum) 595% humidity (5060% optimum) Detector Signal For external processing - recorder, integrator, or computer Power Requirements Voltages: 120/200/220/240 Range: +10%, 10% each Frequency: 47.566 Hz Output: 7,500 Btu/hr max Installing and training : Needed
UV visible spectrophotometer
UV visible spectrophotometer with and without nano cell external dimensions: 24L x 19 W x 11 H weight: 32 lbs Electrical requirements: 10 240 V, 50 60 Hz, selected automatically 150 W maximum
Specifications Bandwidth Variable: 1nm; 2nm; AFBG Microcell optimized; AFBG Fiber optic optimized; AFBG Materials optimized Double Beam with sample and reference cuvet positions; Application Focused Beam Geometry; Czerny-Turner Monochromator Xenon flash lamp, 3-year warranty (Typical lifetime: 5 years)
Optical Design Light Source Detector Wavelength Range Accuracy Scanning Speed Photometric Range Accuracy
190 to 1100nm 0.8nm (full range 190 to 1100nm) <1 to 6000nm/min; variable
>3.5A 0.5A: 0.004A 1A: 0.006A 2A: 0.010A Measured at 440nm using neutral density filters traceable to NIST/NPL 0.5A: 0.004A; 1A: 0.006A; 2A: 0.010A (Measured at 440nm using neutral density filters traceabel to NIST/NPL 0A: 0.00015 A 1A: 0.00050 A 2A: 0.00080 A RMS 260nm, 1nm SBW, RMS
UV Accuracy Noise
Bioreactor system
Suitable for microbial Culture Working Volumes from 0.4 to 1L Integrated 4-gas mixing system (Air, O2, N2, CO2) Freely selectable gas composition to sparger or overlay (headspace) 4 Flow Meters for individual flow rate setting DO control via automatic valves for Air and O2 pH control via CO2 / Acid and Base Special Impeller Design for low shear stress Suitable for Bacteria, Yeast and Fungi cultivation Working Volumes from 0.4 to 5L Airflow gassing system with oxygen enrichment capability Efficient agitation system for high cell density cultures Automatic DO control for agitation, air and O2 flow or substrate addition Anaerobic culture PC to control and process/ data acquisition Installing and training onsite needed.
Applications: Biological cell disruption/homogenization, emulsification, reaction acceleration, dispersion, fine mixing, degassing Processing of 700mL and less Soft-touch keypad Autotune plus Memory (AT/M) provides fully-automatic tuning and stores frequency at the end of each cycle Multiple modes of operation continuous, pulsed, timed, and temperature end-point Setup menu in five languages: English, Spanish, Italian, German or French Digital parameter setting with valid paramter range checking Digital timer (9 hours, 59 minutes, 59 seconds) Amplitude is adjustable from 10 to 100% User I/O offers remote start/stop control and teh ability to view temperature, amplitude, and power values during experiments Automatic end-of-cycle shutoff using limit paramters Self diagnostics on start-up RS-232 port for remote computer access Sound proog enclosure
PCR
Mastercycler nexus Aluminum 96x 0.2 mL PCR tubes or 77x 0.5 mL PCR tubes or 1x 96 well PCR plate 4-99C Fast, Standard, Safe Temperature control mode Heating technology of the block Gradient Lid temperature range Lid Type Block homogeneity Block temperature accuracy Heating rate Cooling rate Interfaces Power consumption Dimensions (W x D x H) Weight Accessories: Submarine electrophoresis unit
Gel Dimensions (w x l) . . . . . . . . . . . . . . . 15 x 20 cm, 15 x 15 cm, or 15 x 10 cm Maximum Buffer Volume . . . . . . . . . . . . . . 1.2 L Maximum Power Settings . . . . . . . . . . . . . . 200 V, 100 mA, 20 W Maximum Sample Capacity . . . . . . . . . . . . 60 Maximum Temperature . . . . . . . . . . . . . . . 45C Indoor Use . . . . . . . . . . . . . . . . . . . . . . . . . 4-40C Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . Up to 80% Unit Dimensions (l x h x w) . . . . . . . . . . . . 36 x 14 x 18.2 cm Safety Certifications . . . . . . . . . . . . . . . . . . EN61010-1, UL61010A-1, CSA C22.2 1010.1, CE
Peltier Elements, Triple Circuit Technology No 37-110C Flex lid for ergonomic lid opening 20-72C < 0.3C, 95C < 0.4C 0.2C approx. 3C/s approx. 2C/s USB, Ethernet, CAN in/out 700 W 25 x 41.2 x 32.1 cm 24 lb / 10.9 kg
o o o
o
o o o o o
Stackable, solid, compact power source Integral timer and auto shutoff prevents fear of losing valuable information No-slip feet anchor provides safe operation Ideal for mini SDS-PAGE, DGGE/CDGE and DNA/RNA submarine electrophoresis Maximum voltage: 300V Maximum current: 400mA Maximum power: 75w Three jacks Internal timer: 0 to 999 minutes
CCD Camera and Capture Software o o o o o o o o o Software enables acquisition, camera control, enhancement, annotation and archiving of digital image; compatible with Windows 98SE, ME, XP, 2000 DigiCam 110 digital color camera, 5.1 megapixel resolution, 4:1 zoom lens; max. Field of View, 29.5 x 22.2cm Apertures from f/2.8 to f/8.0; automatic or manual focus and exposure; 1/4000 to 16 seconds exposure times Focusing ranges: normal, 8 to 31 in. (0.2m to 0.8m); close-up, 1 to 8 in. (0.03m to 0.2m) UVP filter and diopter included Resolution settings from 640 x 480 to 2592 x 1944; interpolated print resolution to 3264 x 2448 High or low image compression with multiple file formats: jpeg, bmp, tif, gif, tga, png USB interface; operates on Li-Ion battery; with charger and AC power supply Additional functions available when software is not in use: multi-mode exposure controls, color LCD monitor, variable shutter speeds, flash controls, Smart Memory Card, utility and photo software and more Camera measures 43/8 x 3 x 23/4 in. (109.2 x 76.2 x 68.6mm); weight, 11 oz. (307g) Darkroom o o o o Sturdy enclosure provides a darkroom environment and protects the camera Full-access door; built-in overhead white light Safety interlock turns UV off when door is open Viewer window for inspecting gels without opening the door
Analysis software
Quickly and automatically detect lanes and bands Designed for use with UVP's basic imaging systems: DigiDoc-It, MultiDoc-It and ChromaDoc-It; can also be loaded on a separate computer to analyze gels from BioDoc-It systems Image analysis detects straight, curved or slanted lanes and bands automatically or manually and creates histograms for detailed visual analysis Generates easy-to-interpret quantitative data of lanes and bands Colony Counting function uses wizard commands to set the automatic colony counting of user-defined areas Enhance images with brightness, contract, gamma, emboss, invert and pseudo color Annotate with text, lines, arrows, ellipse, and highlighter toolsshow, hide or burn into image Save images as various file formats including TIFF, JPEG, BMP and GIF for use in presentations or documentation Create detailed and user-configured reports Compatible with Windows XP (SP2) and newer
Plate is specially designed to easily fit on the transilluminator filter surface UV to white light plates convert to white light for viewing protein gels, coomassie blue stained or silver Uniquely phosphored glass assembly (patent pending) converts the UV radiation via a white diffuser
stained media
Converts UV to 460-470nm with the Visi-BlueT plate for viewing GFP stains, or to 365nm UV with the
UV/UV plate for preparation and gel excision Scratch-resistant glass is mounted in a metal housing for durability Rubber seal stops the plate from sliding Handles are situated on two sides of the plate for easy handling Several standard plate sizes are available, custom sizes are also available