Beruflich Dokumente
Kultur Dokumente
SECTION 1 : Building Description SECTION 2 : Scope of Work SECTION 3 : Design Loads SECTION 4 : Design Codes SECTION 5 : Material Specification SECTION 6 : Surface Treatment SECTION 7 : Standard Supply Items SECTION 8 : Supply Prices 01 02 03 03 04 05 05 06 07 08
ENCLOSURES:
Proposal Drawing
Wall Conditions 1 2 3 4 Near Side Wall Far Side Wall Left End Wall Right End Wall Fully Open for Brickwall by others Fully Open for Brickwall by others Fully Open for Brickwall by others Fully Open for Brickwall by others
Description of Area 02 General Features 1 2 3 4 5 6 7 8 9 10 Span (m) Length (m) Eave Height (m) No. of Interior Columns Width Module Roof Slope Bay Spacing (m) Type of End Frames Wind Bracing Type of Eave 9.284 Out to Inside of R.C.C Column 24.384 Out to Out of R.C.C Column 5.1676 Clear 1 @ 9.284 1:10 1 @ 6.840 + 1 @ 10.450 + 1 @ 7.094 R.C.C Gable Post In Roof Eave Gutter & Downspouts
Wall Conditions 1 2 3 4 Near Side Wall Far Side Wall Left End Wall Right End Wall Fully Open Fully Open for access to existing Building Fully Open Fully Open
HI-TEN Roofing Sheet & Wall Cladding 1 Roof Panel & Wall Cladding Pre-painted Hot Dip, 55% Aluminium & 45% Zinc, Aluzinc Alloy Coated Steel Sheet 0.47 mm thk. including 25 microne polyester protective colour paint to roof (Color to be as per Builtrade Standard Panel Chart).
Insulation No. 1
Location at Roof
Loads on all buildings are applied in accordance with: Bangladesh National Building Code, 1993
Built up sections and hot rolled sections are designed in accordance with: 1989 Manual of Steel Construction Allowable Stress Design American Institute of Steel Construction, Inc. (AISC) 1 East Wacker Drive, Suite 3100, Chicago, Illinois 60601-2001, USA
Cold formed members are designed in accordance with: 1986 Edition of Cold Formed Steel design Manual American Iron and Steel Institute (AISI) 1000 16th Street, NW, Washington, DC 20036, USA
Welding is applied in accordance with: 1996 American Welding Society (AWS D.1.1.96) Structural Welding Code - Steel Manual 550 NW LeJeune Road, Miami, FL 33126, USA
Tk. 51,05,000.00
9.1
PAYMENT TERMS: Client to establish confirmed irrevocable letter of credit negotiable at sight.
9.2
ADDITIONAL WORKS: Additional works will be carried out only on clearly defined written instructions by the client and will be changed at the prevailing rates at time required to carry out such construction works will not be a part of the main contract period.
9.3
VALIDITY OF THE OFFER: This offer is valid up to 14 calendar days from the above noted date. Any extension of validity by Build Trade must be in writing.
9.4
CHANGES/REVISIONS: Any change and /or revision to the above stated scope of work may lead to a variation in the price and delivery period. A change must not hold payment for work in the original contract.
9.5
9.6
ASSUMPTIONS, DEVIATIONS AND EXCLUSIONS: This offer excludes Windows, Foundations and other civil and electrical works.
9.7
ERECTION: Necessary electricity for erection of the building should be provided by the client. Erection schedule stated in section 9 (nine) is based on the uninterrupted power supply at site.
BETWEEN
Nobarun Jute Mills Ltd ON THE ONE HAND, located at Narayanganj and represented by Mr.
______________________ duly authorized to enter into this contract. AND Buildtrade Engineering Ltd. ON THE OTHER HAND, located in Dhaka Trade Centre (6th Floor), 99 Kazi Nazrul Islam Avenue, Karwan Bazar, Dhaka-1215, and represented by Mr.Enayetur Rahman duly authorized to enter into this contract. NOW THEREFORE the parties agree as follows: CONTRACT SCOPE: The supply of (a) Build Trade building (s) as described in the contract documents. CONTRACT DOCUMENTS: The following documents constitute the contract documents: 1. Build Trades Proposal No. BE13-112 Rev.No.00 Dated 19 August 2013 2. Build Trades Standard Terms & Conditions of Sale. 3. Build Trades Standard Product Specifications. CONTRACT PRICE: Tk. IN WITNESS HEREOF, the authorized parties hereto have executed this Contract. FOR : BUILDTRADE ENGINEERING LTD. Name : Enayetur Rahman Title Signature Date : Chairman & Managing Director : : FOR : NOBARUN JUTE MILLS LTD Name : Title :
Signature: Date :
Company Stamp:
Company Stamp: