Beruflich Dokumente
Kultur Dokumente
7.1 Nomenclature Organic acid containing one or more carboxyl (COOH) groups as functioning group Carboxylic acid has the general formula of CnH2n+1COOH or sometimes CnH2nO2. The naming of carboxylic acid end with oic acid.
Name
Structure
7.1.1 Naming carboxylic acid 1. Find the longest chain that attached to COOH and name them accordingly. The C in COOH is C1. 2. Identify the group that attached to the parent chain and name them accordingly 3. Give the numbering of the group that attached accordingly
2-methylbutanoic acid
6-chloro4,4-dimethylhexanoic acid
2-ethyl-3methylpentanoic acid
3-hydroxy-3methylpentanoic acid
3,5-dibromobenzoic acid
2-phenylbutanoic acid
But-2-enedioic acid
3-methylbutanoic acid
Practice : Draw all isomers for carboxylic acid with formula C3H7COOH
O CH3CH2CH2C OH
6.2
Physical properties
(A) Boiling point The trend of the boiling points of may be caused by many factors
a)
Boiling point increase Explanation : When going down to homologous series, the boiling point increase. This is due to the increase in relative molecular mass, which increase the weak Van Der Waals forces causing boiling point increase.
Boiling 78 117 4.4 21 point (oC) Explanation : Ethanoic acid has the highest boiling point among these organic
compound as it form dimer among itself using 2 hydrogen bonds. Propanol which has same molecular mass, contain only 1 hydrogen bond, has a lower boiling point. Chloroethane has higher boiling point compare to butane as it is a polar molecules which form permanent dipole while butane is a non-polar molecules which form induced dipole.
water as they can form hydrogen bond with water. However, the LONGER the ALKYL GROUPS ATTACHED, molecule become MORE HYDROPHOBIC. As a result, HYDROGEN BOND BECOME LESS SIGNIFICANT and cause the solubility decrease.
(C) Acidity of carboxylic acid Carboxylic acid is considerably weak acid since it has a small pKa value. It undergoes partial dissociation
[ RCOO ][ H 3O + ] Ka = [ RCOOH ]
Name Structure pKa Name Structure pKa Methanoic acid HCOOH 3.75 Benzoic acid C6H5COOH 4.19
pK a = lg K a
Ethanoic acid CH3COOH 4.76 Propanoic acid C2H5COOH 4.90 2-methyl ethanoic acid CH2(CH3) COOH 4.86
Carboxylic acid is generally a stronger weak acid than alcohol, since the charge delocatisation at carboxylate ion makes the ion formed become more stable as it formed resonance structure due to mesomeric effect, hence increase the stability of carboxylate ion which result the equilibrium favour to right position (favour to position of donate proton)
Similar to alcohol, carboxylic attached to an alkyl has lower acidity compare to carboxylic acid attached to a phenyl. This is due to alkyl is an electron donating group, while a phenyl is an electron withdrawing group
Carboxylic acid
Explanation Carboxylic acid dissociate in water according to the equation R-COOH + H2O R-COO- + H3O+ Alkyl group, which is an electron donating group, donate electron to O and caused the electron density of O in ROH increase. As a result, O is more readily to accept proton. Acidity decrease in the order, where Methanoic acid > Ethanoic acid > Propanoic acid This is due to, longer the alkyl chain, stronger the electron donating effect, equilibrium favours more to left. Benzoic acid dissociate in water according to the equation C6H5COOH + H2O C6H5COO- + H3O+ The phenyl group is an electron-withdrawing group, which withdrawn the electron density from partially negative charge, , from O making O less readily to accept proton. As a result, O is more readily to donate proton which makes equilibrium favour more to right. Since CH3 is an electron donating group to benzene ring, it will increase the electron density in benzene ring, hence increase the polarity of -O-H bond in the benzene ring. As a result, H is harder to dissociate, hence caused the equilibrium to shift slightly to the left, decreasing the acidity of benzoic acid
Benzoic acid
p-methylbenzoic acid
Effect of the distance of electron withdrawing group toward acidity of butanoic acid Due to inductive effects operate through bonds and are dependent on distance, the effect of halogen substitution decreases as the substituent moves farther from the carboxyl. Thus, 2-chlorobutanoic acid has pKa = 2.86, 3-chlorobutanoic acid has pKa = 4.05, and 4-chlorobutanoic acid has pKa = 4.52. Effect of the number of substituent toward acidity of ethanoic acid -Cl act as electron withdrawing group in carboxylic acid. Note that as the number of -Cl increased, the acidity increased. This can be explained in term of the increment of negative inductive effect caused by -Cl, which further stabilise the conjugate base formed. As a result, equilibrium shift to right, increased the acidity.
7.3 7.3.1
Propan-1-ol
propanoic acid
Oxidation of aldehyde
Propanal
propanoic acid
Hydrolysis of nitrile
Hydrolysis of ester
7.3.2
Name of reaction
Equation
Properties of an acid ----------Reaction Sodium, Na with alkali, metal and metal carbonate Sodium carbonate, Na2CO3
Name of reaction
Equation
Esterification
Phosphorous pentachloride(P Cl5) Formation of acyl chloride @ Thionyl chloride (SOCl2) Lithium Reduction aluminium Formation of hydride ; alcohol LiAlH4 with dry ether
(1) Reaction of acid-base : Formation of salts A. Reaction with base (metal hydroxide and metal oxide) Like all acid, when carboxylic acid reacts with base, it will form salt and water
Carboxylic Acid CH3COOH CH3CH2COOH CH3CH2CH2COOH Base NaOH K2O Mg(OH)2 Salt Water
B. Reaction with metal When acid react with metal, a colourless gas liberated. This gas will give pop sound when burning splinter is put close to the gas hydrogen gas is released. liberated, indicating
Carboxylic Acid CH3COOH Metal Zn Salt Hydroge n
Zn(CH3COO)2 Mg(CH3CH2COO)2
H2 H2
CH3CH2COOH
Mg
C. Reaction with metal carbonate When acid react with metal carbonate solution, an effervescence is observed and a colourless released and gas turned lime water carbon dioxide gas is released. chalky, indicating ..
Carboxylic Acid CH3CH(CH3)COOH Metal carbonate K2CO3 Salt Carbon Water dioxide
CH(CH3)2COOK+ Zn(CH3CH2COO)2
CO2 CO2
H2O H2O
CH3CH2COOH
ZnCO3
(2) Esterification Formation of ester When alcohol reacts with carboxylic acid catalysed by concentrated sulphuric acid, ester and water is formed. The H is donated by alcohol while OH is given off by carboxylic acid
carboxylic acid
Carboxylic Acid
alcohol Alcohol
ester
Name of ester : Alkyl carboxylate
Carboxylate ion
Alkyl
Carboxylic Acid
Alcohol
Ester
Water
CH3COOH
CH3CH2OH
H2O
CH3CH(CH3)COOH
CH3CH2CH2OH
H2O
CH3C(CH3)2COOH
CH3CH(CH3)OH
H2O
H2O
(3)Formation of acyl chloride When carboxylic acid is reacted with a chlorine-rich compound such as phosphorous pentachloride (PCl5) or thionyl chloride (SOCl2), an acyl chloride is formed. A white fume of hydrogen chloride is given off as side product. The reaction take place is a nucleophilic substitution reaction.
Carboxylic acid CH3CH2COOH Chlorine Compound PCl5 Acyl chloride Side product Hydrogen chloride
+ POCl3 + SO2 + H 2O
+ HCl + HCl
CH3CH(CH3)COOH
SOCl2
CH3CH(CH3)CH2COOH
HCl
PCl5
+ POCl3
+ HCl
(4) Reduction of carboxylic acid : Formation of alcohol Using strong reducing agent such as lithium tetrahydridoluminate (LiAlH4), carboxylic acid is readily to reduce to become alcohol. Reagent : Lithium tetrahydridoaluminate (LiAlH4) under dry ether dry ether CH3CH2CH2OH + H2O CH3CH2COOH + LiAlH4
dry ether CH3CH(CH3)CH2OH + H2O CH3CH(CH3)COOH + LiAlH4
Observation & Equation Positive test : Carboxylic acid Effervescence occurs. Gas released turn lime water chalky indicating carbon dioxide is released. Eq. : RCOOH + Na2CO3 RCOO-Na+ + CO2 + H2O
Positive test : Carboxylic acid Dark red solution is obtained when FeCl3 is added to carboxylic acid. Equation : CH3COO- + FeCl3 Fe(CH3COO)3 + 3 ClIron (III) red solution chloride, FeCl3 When boiled, the red solution turns to brown precipitate. Fe(CH3COO)3 + 2 H2O Fe(CH3COO)(OH)2 + 2 CH3COOH brown precipitate
7.4
Methanoic acid is the first member of carboxylic acid homologous series. Not only it shows the similar properties of carboxylic acid as proposed earlier, it also possessed other special properties. This special properties is due to the of having 2 functioning group at the same molecule where Functioning as aldehyde Functioning as carboxylic acid
Methanoic acid is a strong reducing agent, unlike other carboxylic acid. It is easily oxidised to form carbon dioxide as shown in the following reaction (can also be its salt like HCOONa)
Reaction with
Observation : White precipitate is 1st formed and eventually turn to silver Silver nitrate, Equation : HCOONa + AgNO3 AgNO3 HCOOAg (white ppt) + NaNO3 2 HCOOAg 2 Ag (silver) + CO2 Due to the presence of aldehyde as functioning group, it give positive test to Tollen reagent (silver complex) Tollens Test Observation : a silver mirror is observed Equation : HCOOH + Ag2O 2 Ag (silver mirror) + CO2 + H2O Methanoic acid reduce mercury (II) chloride to mercury (I) chloride (white ppt) Equation : HCOOH + 2 HgCl2 Hg2Cl2 + CO2 + 2 HCl Under excess methanoic acid, a black precipitate of mercury is observed CO2 + 2 HCl + 2 Hg Equation : HCOOH + Hg2Cl2
Reaction with
Dehydration : When heated with conc. H2SO4, methanoic acid dehydrated reaction with and produce carbon monoxide and water conc. conc . H2SO4 sulphuric Equation : HCOOH CO + H2O acid, H2SO4 Acidified potassium manganate (VII). KMnO4 / H+ As discussed earlier, when methanoic acid dissolved in KMnO4 / H+, the purple colour of potassium manganate (VII) is decolourised while carbon dioxide and water is formed Equation : HCOOH + KMnO4 / H+ CO2 + H2O
Unlike other carboxylic acid, when react with phosphorous Phosphorous pentachloride, it will not form acyl chloride pentachloride , PCl5 Equation : HCOOH + PCl5 CO + 2 HCl + POCl3
7.5
The structure of ethanedioic acid can be described as It dissolve in alcohol and water but not in organic solvent such as propanone or ether. It can be prepare by the following method :
Step 1 : heating sodium methanoate Step 2 : add with sulphuric acid Na2C2O4 + H2SO4 H2C2O4 + Na2SO4
2 HCOONa
Na2C2O4 + H2
Acidified potassium manganate (VII), Equation : 5 C2O42- + 2 MnO4- + 16 H+ + KMnO4 / H 10 CO2 Concentrated sulphuric acid, H2SO4
Similar to methanoic acid, dehydration occur when added to conc. H2SO4 Equation : H2C2O4 + conc. H2SO4 CO2 + CO + H2O
White precipitate is observed when reacted Equation : Ca2+ + C2O42CaC2O4 (white precipitate)
7.6
Methanoic acid and ethanoic acid is used in rubber industries to coagulate latex Ethanoic acid is used as preservative and additive in food industries Ethanoic acid is used to manufacture ethanoic anhydride
Benzoic acid is used as preservative. It is also used as an antibacterial and antifungal agent Calcium propanoate (react propanoic with calcium hydroxide) is used as preservative in bread to prevent the growth of mold Dicarboxylic acid is used mainly in manufacturing synthetic polymer such as nylon
7.7
In this Chapter, were looking into organic compounds derived from carboxylic acid. Examples of these compounds are acyl chlorides 7.7.1 esters amides Physical properties of carboxylic acid derivatives
Molecular structure CH-3COCl CH3COOCH3 CH3CH2CH2COH CH3COCH2CH3 CH3CH2CONH2 Molecular mass 78 74 72 72 73 Boil point (0C) 51 57 76 80 213
Propanamide has the highest boiling point among these organic compound as it contain 2 hydrogen bonds. Butanal and butanone are polar molecule which are held by permanent dipole permanent dipole, while ethanoyl chloride and ethyl methanoate is non-polar which are held by temporary dipole induced dipole.
7.8
Acyl chloride
Acyl chloride has the general formula of CnH2n+1COCl. The ending of alkyl group attached to COCl = ~noyl chloride Acyl chlorides are colourless liquids with pungent smell. They are very reactive compound Ethanoyl chloride CH3COCl CH3CH2COCl Propanoyl chloride 2-methylpropanoyl chloride CH3CH(CH3)COCl Benzoyl chloride C6H5COCl 7.8.1 Chemical properties of acyl chlorides Most of the reaction of acyl chlorides are acylation reaction, where the Cl is substitute out easily. This is due to the negative inductive effect (I) of the oxygen atom, which cause the carbon atom become more positively partial charged. As a result, CCl carries a much higher partially positive charge and become more reactive for nucleophilic attack
Name of reaction
Equation
Hydrolysis
Water
propanoyl chloride water propanoic acid
Esterification
Alcohol
propanoyl chloride
(A)
Acyl chloride undergoes hydrolysis when react with water to form carboxylic acid. A white fume of hydrogen chloride is released as side product of the reaction. Hydrolysis occur vigorously as the Cl is readily to leave the group. Examples of reaction
Acyl chloride CH3COCl CH3CH(CH3)COCl Water + H2O + H2O Carboxylic acid HCl HCl HCl
CH3COOH CH3CH(CH3)COOH
+ H2O
HCl
(B) Formation of ester Acyl choride react with alcohol / phenol at room temperature to form ester. Unlike carboxylic acid, which required an acidic medium, acyl chloride does not require an acidic medium. Similar to the hydrolysis of acyl chloride, a white fume of hydrogen chloride is released.
Acyl chloride CH3COCl CH3CH2CH2COCl CH3C(CH3)2COCl Alcohol CH3CH2OH CH3CH2CH2OH CH3OH Ester HCl HCl HCl HCl
(C)
Formation of amide
Acyl chloride form amides when reacted with ammonia, primary and secondary amine
Acyl chloride Ammonia / amine NH3 Amide HCl
CH3CH2COCl
CH3CH2CONH2
HCl
CH3COCl
CH3CH2NH2
CH3CONHCH2CH3
HCl
CH3CH2CH2COCl
CH3NH(CH3)
CH3CH2CH2CON(CH3)2
HCl
7.9
Ester
Esters are the functional isomerism of carboxylic acid. Similar to carboxylic acid, it has the general formula of CnH2nO2. In naming ester, the alkyl attached to alcohol is named where the carboxylic acid is named as its anion. Examples
Methyl propanoate Ethyl butanoate Propyl benzoate Phenyl benzoate
Lower esters are colourless liquid with pleasant fruity odour. Larger esters are colourless solid. Small ester such as methyl methanoate or ethyl methanoate is soluble in water. Most of the esters are insoluble in water but soluble in organic solvent.
ethanol
ethyl propanoate
Name of reaction
Equation
ammonia
propylamide
ethanol
propan-1-ol
ethanol
(A) Hydrolysis of ester Hydrolysis of ester is a reverse reaction of esterification. When ester is dissolved in diluted acidic solution, it will form back carboxylic acid and ester.
Ester Water Carboxylic acid Alcohol
+ H2O/ CH3CH2CH2COOH H+
CH3CH2CH2OH
+ H2O/ H+
+ H2O/ H+
When ester is hydrolysed under alkaline condition, metal salt is formed together with alcohol Example ; when ethyl propanoate is hydrolysed under alkaline condition.
When sodium propanoate is react using acid such as sulphuric acid, the carboxylic acid formed back.
(B)Formation of amide : reaction with ammonia Ammonia is a weaker nucleophile compare to hydroxide ion. So, to effectively react with ester, concentrated ammonia is mixed with ester and heated. The products are an amide and alcohol
Ester Ammonia Amide Alcohol
+ NH3
CH3CH2CONH2
CH3CH2OH
+ NH3
CH3OH
+ NH3
CH3CH2CONH2
(C) Reduction of ester When reduced using strong reducing agent such as LiAlH4, ester will formed alcohol as products
Ester LiAlH4 LiAlH4 / H+ Alcohol Alcohol
CH3CH2CH2OH
CH3CH2OH
LiAlH4 / H+
CH2OH
CH3OH
LiAlH4 / H+
CH3CH2CH2OH
7.9.3
Lipids are organic substance found in living organisms, which is insoluble in water. Members of lipid include fats and oils, steroids, waxes and some vitamins. Fatty acids are common name for long-chain carboxylic acid obtained from fats and oils They are natural esters formed from propan-1,2,3-triol (known as glycerol) and long chain fatty acid.
+ 3 CH3(CH2)14COOH
There are 2 types of fatty acid which are known as saturated fatty acid and unsaturated fatty acid. Saturated fatty acid all CC are singly bonded to each other in the long carbon chain Unsaturated fatty acid contain at least 1 C=C within the long carbon chain. If theres only one C=C in the long carbon chain, it is known as monounsaturated fat. If theres more than one C=C, they are known as polyunsaturated fat. In natural product of fats and oils contain mixture of saturated fatty acid and unsaturated fatty acid Fats / oil Palm oil Sunflower oil Olive oil Butter fat Lard Saturated fat 51% 11% 14% 66% 41% Polyunsaturated fat 10% 69% 9% 4% 12% Monounsaturated fat 39% 20% 77% 30% 47%
Manufacture of soap An important use of soap is in soap making. Soaps are sodium (Na) or potassium (K) salts of long chain of fatty acids. Hydrolysis of fats / oils in aqueous NaOH ( known as saponification) form glycerol& sodium carboxylate salt (soap). The cleansing action of soap is due to the hydrophobic part of soap which dissolves in grease easily and dirt are removed easily using the attraction forces between cation and the negative head of soap. Application of ester in industries Used as food additive in food processing industries (taste enhancer, flavouring and preservatives) Solvent for drugs, antibiotics and cosmetic. Use to produce cosmetic, perfume / cologne and air-freshener. Polystyrene cement use to bind to another type of surface in the cement Polyester (terylene) synthetic fibres in textiles industries. Polystyrene (alkyd resin) used in pain and surface coating Unsaturated polyester are readily copolymerised to give thermosetting products. They are used in the manufacture of glass fiber products for reinforcement in boat and cars.
7.10 Amides Amides are organic compound with the general formula of CnH2n+1CONH2. Amides are formed by replacing hydroxyl (OH) with amine (NH2) group. Naming of amide end with suffix amide. Examples of amides are
ethanamide
propanamide
butanamide benzamide
20 amide
N-propylethanamide
N-phenylpropanamide
30 amide
N-ethyl-N-methylbutanamide
N,N-dimethylbenzamide
7.11
Preparation of amide
Reagent used and condition Acyl chloride with ammonia Equation
Name of reaction
propanoyl chloride
ammonia
propylamide
Name of reaction
Equation
Hydrolysis of amide
ethanamide
ethanoic acid
Propanamide
propanitrile
Propanamide
nitrous acid
propanoic acid
Name of reaction
Equation
Hoffmann degradation
propanamide
ethylamine
Reduction of amide
propanamide
propylamine
(A)
Hydrolysis of amide
Amide slowly hydrolysed by refluxing with dilute acid / alkali solution. In both cases, the intermediate product is ammonium salt of carboxylic acid
Step 1 : Formation of ammonium salt
Overall :
Step 2 : Formation of carboxylate salt Under alkaline medium (way of distinguish between amine and amide)
Overall :
(B) Dehydration of amide When amides are distilled over P2O5, phosphorous pentoxide, nitriles are formed. So P2O5 act as dehydrating agent. The H2 from NH2 and O from C=O are withdrawn out and formed water. The nitrile formed can be later used to synthesis amine and carboxylic acid using suitable reagent
Amide Reagent
2O5 P
Nitrile
Reagent
4 LiAlH
Compound
P2 O 5
H 2O , H +
2O5 P
4 LiAlH
(C)
Nitrous acid, HNO2, can be prepared by treating sodium nitrite, NaNO2, with dilute HCl in cold NaNO2 (aq) + HCl (aq)
cold
HNO2 + NaCl
When nitrous acid, HNO2, react with amide, carboxylic acid, nitrogen and water is produced
Amide Nitrous acid Carboxylic acid Side product
HNO2
HNO2
HNO2
(D)
The terms degradation mean reduce the number of carbon, an opposite of forming nitrile to increase no of carbon in an organic compound. The reagents used for Hoffmann degradation are bromine solution in sodium hydroxide (Br2 in NaOH)
Amide
Amine
Side products
CH3CH2NH2 CH3CH2CH2NH2
Br2 + 4 NaOH
Br2 + 4 NaOH
(E)Reduction of amide Amide can be reduced to become an amine using strong reducing agent such as LiAlH4 (lithium tetrahydridoaluminate) under dry ether. The number of carbon after reduction remains the same
Amide Strong reducing agent Amine Side products
LiAlH4
CH3CH2CH2NH2
+ H2O
LiAlH4
CH3CH2CH2CH2NH2
+ H2O
LiAlH4
+ H2O
RCOOH + H2O
RCOO- + H3O+
Acidity increase from CH3COOH < CH2ClCOOH < CHCl2COOH Cl is electorn withdrawing group / caused negative inductive effect / Greater number of Cl will increase the inductive effect, causing more acidic [1] [H3O+] =
K a c or [ H 3O + ] = 0.0014 0.100
pH = 1.9
alkene / C=C
Aldehyde / -CHO
O CH2 OC C CH2 OH
KMnO4 / H+ oxidation
cold , dilute
under UV reflux
H C HO C
OH
X Effervescences occur, which turn lime water chalky CH3COOH + NaHCO3 CH3COO-Na+ + H2O + CO3 Y Silver mirror is observed CH2(OH)CHO + 2Ag+ + 3OH- CH2(OH)COO- + 2H2O + 2 Ag
Acidic trend increase from 1 < 2 < 3 [1] This is due to, when number of Cl increase, the negative inductive effect increase gradually[1], which increase the acidity Acid 2 is stronger than Acid 4 [1] This is due to, inductive effect is stronger if Cl is closer to the -bond of COOH group [1] [H3O+] =K a c or [ H 3 O + ] = pH = 3.5
1 . 26 10 5 0 . 010
ester Dilute HCl under reflux CH3OH catalysed by H2SO4 under reflux CH2(Br)CH(Br)CH2(Br) COOHCOCOOH
890g of triglyceride produces 3 298 = 894 g of biodiesel [1] 500kg produces 500 894/890 = 502 kg biodiesel [1] C17H35CO2CH3 + 27 O2 19 CO2 + 19 H2O Mass of CO2 produced = 10 44 19/298 = 28 kg.
economic argument (NOT just cheaper) e.g. oil will become increasingly more expensive as it runs out ref to CO2 cycle (e.g. no net increase in CO2, i.e. carbon neutral) or less global warming (due to a smaller carbon footprint) renewable/sustainable the effect of biofuel cultivation on world food prices