Beruflich Dokumente
Kultur Dokumente
Applications
Continuous level measurement with visual display of the Volume- or depth-proportional display of the filling level
Individual design and corrosion resistant materials enable Chemical industry, petrochemical industry, natural gas,
offshore, shipbuilding, machine building, power generating equipment, power stations Process water and drinking water treatment, food and beverage industry, pharmaceutical industry
Special features
Process- and system-specific solutions possible Operating limits:
- Operating temperature: T = -160 ... +450 C - Working pressure: P = Vacuum to 420 bar - Limit S. G.: 400 kg/m3 Wide variety of different process connections and materials Level sensor or magnetic switch mounted externally (option) Explosion-protected version (optional)
Description
The WIKA model BNA bypass level indicator consists of a bypass chamber, which, as a communicating interface, is connected laterally to a vessel via 2 process connections (flanged, threaded or welded). Through this type of arrangement, the level in the bypass chamber corresponds to the level in the vessel. The cylindrical float (with a permanent magnet system, mounted within the bypass chamber) transmits the liquid level, contact free, to the outside via the magnetic roller display mounted on the bypass chamber. In this are fitted, at 10 mm intervals, red/white plastic or ceramic rollers with bar magnets.
WIKA data sheet LM 10.01 09/2010
Bypass level indicator, model BNA with option level sensor and magnetic switch
Through the directional magnetic field of the permanent magnet system in the cylindrical float, the magnetic rollers, through the wall of the bypass chamber, are turned through 180. For an increasing level from white to red; for a falling level from red to white. Thus the bypass level indicator displays the level of a vessel without a power supply - visible as a red column.
Page 1 of 24
combustible, toxic, hot, agitated and contaminated media Without power supply the functioning of the magnetic roller display is guaranteed even in the case of power failures Available for applications in all areas of industry through use of highly corrosion-resistant materials Continuous measurement of the liquid levels irrespective of physical or chemical changes of state of the measured media, such as: foaming, conductivity, dielectric constant, pressure, vacuum, temperature, vapour, condensation, blistering, effects of boiling Volume-proportional or depth-proportional display of the filling level Interface layer measurement and overall level from -density of more than 50 kg/m3
Terminal box
Options
Explosion-protected versions Customer-specific solutions Bypass chamber and float made of different materials Magnetic switch or level sensor mounted externally Bypass chamber end
side of a vessel a float moves with the liquid level of the medium to be measured. oned to immersion height inside the float, simultaneously activates the magnetic roller display, which is fixed to the outside of the bypass chamber, and the switching and measuring elements through its magnetic field.
Example
Mounted bypass level indicator, model BNA
Magnetic switch
Level sensors
Page 2 of 24
Specifications
Bypass chamber Chamber end top
42 x 2 mm Flat top Options: (see page 24) Vent plug G 1/2" Vent valve Vent flange Flange connection with drain plug G 1/2" Options: (see page 24) - Drain valve - Drain flange
90
Process connections
Centre-to-centre distance
Side-side (options see page 23) Flanges DN 10 - DN 25, PN 6, DIN 2631 DN 10 - DN 25, PN 16, DIN 2633 DN 10 - DN 25, PN 40, DIN 2635 DN 32 - DN 100, DIN 2527 1/2" - 4", ANSI B 16.5 class 150 or class 300 Thread or weld stubs GM /... = female thread / size GN /... = male thread / size S /... = weld stubs / Min. 150 mm to max. 2000 mm Max. 16 bar (according to float design)
M...
U...
M = centre-to-centre distance of the process connections U = dependent on float X = according to process connection
Model ZTS - Material titanium 3.7035 - S.G. min. 800 kg/m3 - Pressure max. 16 bar - Temperature max. 150 C Model ZBS - Material Buna - S.G. min. 800 kg/m3 - Pressure max. 6 bar - Temperature max. 80 C
~25
Model MRA For specifications and further designs and options see page 16 See page 17 ... 20 See page 21 and 22
Float
50
50
Magnetic system
Page 3 of 24
Version PN 6 - PN 40
Specifications
Bypass chamber Chamber end top
60.3 x 2 mm or 64 x 2 mm Flat top, welding cap or flange connection Options: (see page 24) Vent plug G 1/2" Vent valve Vent flange Flange connection with drain plug G 1/2" Options: (see page 24) - Drain valve - Drain flange
90
M...
Process connections
Side-side (options see page 23) Flanges DN 10 - DN 25, PN 6, DIN 2631 DN 10 - DN 25, PN 16, DIN 2633 DN 10 - DN 25, PN 40, DIN 2635 DN 32 - DN 100, DIN 2527 1/2" - 4", ANSI B 16.5 class 150 or class 300 Thread or weld stubs GM /... = female thread / size GN /... = male thread / size S /... = weld stubs / Min. 150 mm to max. 6000 mm (larger distances on request) Max. 40 bar (according to flange design) -196 C ... +450 C
Temperature range
Float
M = centre-to-centre distance of the process connections U = dependent on float X = according to process connection
Model ZTSS / ZVSS - P 25 bar (titanium 3.7035, stainless steel 1.4571) - Float length depending on S.G. - Specifications (see page 14) Model ZTS / ZVS - Float design according to process parameters S.G., pressure and temperature (see page 15) Model MRA: < 200 C Model MRK: > 200 C For specifications and further designs and options see page 16 See page 17 ... 20 See page 21 and 22 On request On request
~ 35
Further options: Magnetic switch Level sensor Electrical trace heating Bypass chamber insulation
Page 4 of 24
Version PN 64 - PN 100
Specifications
Bypass chamber Chamber end top PN 64: 60.3 x 2 mm or 60.3 x 2.6 mm PN 100: 65 x 3.5 mm Flat top, welding cap or flange connection DN 50, PN 64 or ANSI 2", class 600 DN 50, PN 100 or ANSI 2", class 600 Options: (see page 24) Vent plug G 1/2" Vent valve Vent flange Flange connection DN 50, PN 64 or ANSI 2", class 600 DN 50, PN 100 or ANSI 2", class 600 with drain plug G 1/2 Options: (see page 24) - Drain valve - Drain flange Side-side (options see page 23) Flanges DN 10 - DN 25, PN 64, DIN 2637 DN 10 - DN 25, PN 100, DIN 2637 1/2" - 3", ANSI B 16.5, class 600 Thread or weld stubs GM /... = female thread / size GN /... = male thread / size S /... = weld stubs / Min. 150 mm to max. 6000 mm (larger distances on request) PN 64: max. 64 bar PN 100: max. 100 bar
100
M...
Process connections
~ 51
~ 63
Float
Magnetic roller display M = centre-to-centre distance of the process connections U = dependent on float
Model ZTS - Float design according to process parameters S.G., pressure and temperature (see page 15) Model MRA: < 200 C Model MRK: > 200 C For specifications and further designs and options see page 16 See page 17 ... 20 See page 21 and 22 On request On request
Further options: Magnetic switch Level sensor Electrical trace heating Bypass chamber insulation
Page 5 of 24
Process connections
Side-side (options see page 23) Flanges DN 10 - DN 25, PN 160, DIN 2638 DN 10 - DN 25, PN 250, DIN 2628 DN 10 - DN 50, DIN 2527 1/2" - 2 1/2", ANSI B 16.5, class 1500 Thread or weld stubs GM /... = female thread / size GN /... = male thread / size S /... = weld stubs / Min. 150 mm to max. 6000 mm (larger distances on request) PN 160: max. 160 bar PN 250: max. 250 bar
PN 160: -30 C ... +285 C PN 250: -30 C ... +200 C (according to design)
Further options: Magnetic switch Level sensor Electrical trace heating Bypass chamber insulation
Model MRA: < 200 C Model MRK: > 200 C For specifications and further designs and options see page 16 See page 17 ... 20 See page 21 and 22 On request On request
Model ZTKS Model ZCFS (solid body material, leak-proof) - Float design according to process parameters S.G., pressure and temperature (see page 15)
Page 6 of 24
76 x 10 mm Welding cap or flange connection ANSI 2 1/2", class 2500 Options: (see page 24) Vent plug G 1/2" Vent valve Vent flange Flange connection ANSI 2 1/2, class 2500 with drain plug G 1/2" Options: (see page 24) - Drain valve - Drain flange
Process connections
Side-side (options see page 23) Flanges DN 10 - DN 25, PN 400, DIN 2627 DN 10 - DN 50, DIN 2527 1/2" - 2 1/2", ANSI B 16.5, class 2500 Thread or weld stubs GM /... = female thread / size GN /... = male thread / size S /... = weld stubs / Min. 150 mm to max. 6000 mm (larger distances on request) max. 400 bar -30 C ... +70 C (according to design)
Magnetic roller display Further options: Magnetic switch Level sensor Electrical trace heating Bypass chamber insulation
Model ZTKS Model ZCFS (solid body material, leak-proof) - Float design according to process parameters S.G., pressure and temperature (see page 15) Model MRA For specifications and further designs and options see page 16 See page 17 ... 20 See page 21 and 22 On request On request
Page 7 of 24
Bypass chamber and heating jacket pipe made of stainless steel 1.4571 Option: Explosion-protected version
150
Specifications
Bypass chamber Chamber end top Heating jacket pipe
60.3 x 2 mm 70 x 2 mm Welding cap Options: (see page 24) Vent plug G 1/2" Vent valve Vent flange Flange connection with drain plug G 1/2" Options: (see page 24) - Drain valve - Drain flange
80
M ...
Process connections
80
Side-side (options see page 23) Flanges DN 10 - DN 25, PN 6, DIN 2631 DN 10 - DN 25, PN 16, DIN 2633 DN 32 - DN 100, DIN 2527 1/2" - 4", ANSI B 16.5, class 150 DN 10 - DN 25, PN 40, DIN 2635 1/2" - 4", ANSI B 16.5, class 300 Thread or weld stubs GM /... = female thread / size GN /... = male thread / size S /... = weld stubs / Min. 150 mm to max. 6000 mm (larger distances on request) Process: max. 6 bar or max. 40 bar (according to flange design) Heating jacket: max. 16 bar
~42
Process connection
Float
Model ZTS and ZVS - Float design according to process parameters S.G., pressure and temperature (see page 15) Model MRA: < 200 C Model MRK: > 200 C For specifications and further designs and options see page 16 See page 17 ... 20 See page 21 and 22
Page 8 of 24
Specifications
Bypass chamber Chamber end top
88.9 x 2 mm Flange connection DN 80 Options: (see page 24) Vent plug G 1/2" Vent valve Vent flange Flange connection DN 80 with drain plug G 1/2" Options: (see page 24) - Drain valve - Drain flange
80
M ...
Process connections
Side-side (options see page 23) Flanges DN 10 - DN 25, PN 16, DIN 2633 DN 10 - DN 25, PN 40, DIN 2635 DN 10 - DN 100, DIN 2527 1/2" - 4", ANSI B 16.5 Thread or weld stubs GM /... = female thread / size GN /... = male thread / size S /... = weld stubs / Min. 150 mm to max. 6000 mm max. 25 bar (according to flange design)
Model ZTS and ZVS - Float design according to process parameters S.G., pressure and temperature (see page 15) Model MRA: < 200 C Model MRK: > 200 C For specifications and further designs and options see page 16 See page 17 ... 20 See page 21 and 22 On request On request
A-A
Further options: Magnetic switch Level sensor Electrical trace heating Bypass chamber insulation
Page 9 of 24
150
~ 35
130/ 150 150
Centre-to-centre distance
Side-side Flanges DN 25, PN 16, DIN 2633 DN 32 - DN 100, DIN 2527 1/2" - 4", ANSI B 16.5, class 150 Thread or weld stubs GM /... = female thread / size GN /... = male thread / size S /... = weld stubs /
M = ...
Min. 150 mm to max. 1900 mm (overall pipe length max. 2900 mm) With overall pipe length > 2900 mm: Bypass chamber separated with flange connection max. 16 bar depending on the medium
Magnetic roller display Further options: Magnetic switch Level sensor Electrical trace heating Bypass chamber insulation
Model ZTECS (material stainless steel 1.4571, E-CTFE coated) Model ZVECS (material titanium 3.7035, E-CTFE coated) - Float design according to process parameters S.G., pressure and temperature (see page 15) Model MRA-M For specifications and further designs and options see page 16 See page 17 ... 20 See page 21 and 22 On request On request
~ 50
M = centre-to-centre distance of the process connections U = dependent on float
Page 10 of 24
U = ...
Bypass chamber made of stainless steel 1.4571 PTFE lining: thick-walled 3 mm, vacuum-tight, option: anti-static
155
Specifications
Bypass chamber Chamber end top Chamber end bottom Process connections
70 x 2 mm Flange connection Options: (see page 24) Vent flange Flange connection Options: (see page 24) - Drain flange
150
Centre-to-centre distance
M ...
Side-side Flanges DN 25, PN 16, DIN 2633 with reducing flange DN 32 - DN 100, PN 10, DIN 2848 / 2874
Min. 150 mm to max. 1500 mm (overall pipe length max. 2000 mm) With overall pipe length > 2000 mm: Bypass chamber separated with flange connection max. 10 bar depending on the medium
Model ZTECS (material stainless steel 1.4571, E-CTFE coated) Model ZVECS (material titanium 3.7035, E-CTFE coated) - Float design according to process parameters S.G., pressure and temperature (see page 15) Model MRA-M For specifications and further designs and options see page 16 See page 17 ... 20 See page 21 and 22 On request On request
Further options: Magnetic switch Level sensor Electrical trace heating Bypass chamber insulation
~45
Page 11 of 24
Plastic version
Bypass chamber and float made of polypropylene or PVDF Specifications
Bypass chamber Chamber end top 63 x 3 mm Flat top Options: (see page 24) Vent plug G 1/2" Vent valve Vent flange Fitting Options: (see page 24) - Drain valve - Drain flange
Process connections
Side-side flanges DN 15 - DN 50, PN 16 Connection dimensions: ISO/DIN 1/2 - 2, ANSI B 16.5, class 150 Connection dimensions: ANSI B 16.5 Material: UP - GF Min. 200 mm to max. 4000 mm max. 4 bar Polypropylene PVDF max. 60 C max. 80 C
Model ZPPS (material Polypropylene) Model ZPFS (material PVDF) - Float length depending on S.G. For specifications see page 14
Model MRA-M For specifications and further designs and options see page 16 See page 17 ... 20 See page 21 and 22
Page 12 of 24
Material
Operating temperature Working pressure Test pressure Diameter Float model Float L (mm) Weight (g)
PVDF
+ 80 C
PP
Max. 6 bar Max. 9 bar 50 mm ZPFS ... 150 295 290 200 393 335 250 491 385 300 589 435 350 687 480
+ 60 C
Max. 6 bar Max. 9 bar 50 mm ZPPS ... 150 295 260 200 393 285 250 491 310 300 589 335 350 687 360
Volume (cm3)
Emersion height in mm 0 10 20 Nominal height 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350
Immersion depth table in relation to the specific gravity of the medium (kg/m3)
1230 1340 1480 1640 1850 2110 2460 2950 1000 1070 1140 1220 1310 1420 1550 1710 1900 2130 2440 2840 890 930 980 1030 1090 1150 1230 1310 1400 1510 1630 1780 1960 2180 2450 2800 820 850 890 920 960 1010 1050 1110 1170 1230 1300 1380 1480 1580 1700 1850 2010 2220 2460 2770 760 790 810 840 870 910 940 980 1020 1060 1110 1160 1220 1290 1360 1440 1530 1630 1750 1880 2040 2220 2440 2720 1100 1200 1320 1470 1660 1890 2210 2650 850 910 970 1040 1120 1210 1320 1450 1610 1810 2070 2420 2900 720 750 790 830 880 930 990 1050 1130 1210 1320 1440 1580 1750 1970 2260 2630 630 660 680 710 740 780 810 850 900 950 1000 1070 1140 1220 1310 1420 1550 1710 1900 2130 2440 2840 570 590 610 630 650 680 710 730 760 800 830 870 920 960 1020 1080 1150 1220 1310 1410 1530 1670 1830 2040 2290 2620 -
Note: The optimum float will be selected after a feasibility test carried out by WIKA.
Page 13 of 24
Operating temperature Working pressure Test pressure Diameter Float model Float L (mm) Weight (g)
Titanium 3.7035
- 40 C to + 250 C Max. 30 bar Max. 45 bar 50 mm ZTSS ... 150 262 169 200 360 240 250 458 265 300 556 287 350 654 312 400 753 342
3
Volume (cm3)
Emersion height in mm 0 10 20 30 40 Nominal height 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 360 370 380 390 400 410 420 430 440 450
Immersion depth table in relation to the specific gravity of the medium (kg/m )
1170 1280 1420 1600 1820 2110 2520 950 1010 1080 1160 1260 1370 1500 1670 1870 2130 2480 2960 800 840 880 930 980 1050 1110 1190 1280 1390 1510 1660 1840 2070 2360 2740 720 740 780 810 850 890 930 980 1030 1090 1160 1240 1320 1420 1540 1680 1840 2040 2290 2620 680 700 720 750 780 810 840 870 910 950 1000 1050 1100 1160 1230 1310 1390 1490 1610 1740 1890 2080 2310 2590 2950 640 660 680 700 720 740 770 790 820 850 890 920 960 1000 1050 1090 1150 1210 1280 1350 1430 1530 1640 1760 1900 2080 2280 2530 2840 600 610 630 650 660 680 700 720 740 770 790 820 850 880 910 940 980 1020 1070 1110 1170 1220 1290 1360 1440 1530 1630 1740 1880 2030 2210 2430 2690 770 850 940 1050 1200 1400 6070 2070 2720 760 810 860 930 1000 1090 1200 1330 1500 1710 1980 2370 2930 640 670 700 740 790 830 890 950 1030 1110 1210 1330 1470 1650 1880 2190 2610 560 580 600 630 660 690 720 760 800 850 900 960 1030 1110 1200 1310 1440 1590 1790 2040 2370 2830 510 530 540 560 580 610 630 660 690 720 750 790 830 870 930 980 1050 1120 1210 1310 1420 1560 1730 1950 2220 2580 480 500 510 530 540 560 580 600 620 640 670 690 720 750 790 820 860 910 960 1010 1080 1150 1230 1320 1430 1560 1710 1900 2130 2430 2820 460 470 480 490 500 520 530 550 570 580 600 620 640 670 690 720 740 780 810 850 890 930 980 1030 1090 1160 1240 1320 1420 1540 1680 1840 2040 2290 2620 -
Note: The optimum float will be selected after a feasibility test carried out by WIKA.
Page 14 of 24
Magnetic system
Magnetic system
Option: E-CTFE-, E-TFE- or PFA coated Max. working pressure: Stainless steel > 20 bar to 40 bar Titanium > 16 bar to 130 bar Temperature-dependent (high temperature version up to 400 C)
absolutely leak-proof Max. working pressure 420 bar Max. operating temperature 100 C
Straight cylinder
Design depending on the 3 physical parameters Pressure, temperature and S.G. Pressure strength Through reinforcement segments Sealed design Magnetic system (radial-symmetric) According to pressure and temperature Float length According to S.G. of medium and weight of float
Ordering information Max. working pressure (PN) .... bar Test pressure PN x 1.3 / PN x 1.5 Max. operating temperature .... C Min. S.G. of the medium .... kg/m3
Note: The optimum float will be selected after a feasibility test carried out by WIKA.
Page 15 of 24
M = measuring range L = M + 83
M = measuring range L = M + 83
max. ambient temperature for the adhesive foil: 100 C Aluminium or stainless steel engraved, graduation selectable
L ...
M ...
40
49
M = measuring range L = M + 83
Page 16 of 24
23
Connection diagrams
Magnetic switch
22 Ohm
1K
10K 10K
Standard version
with connection cable
30 5.5 25
Specifications
Contact Contact type Switch behaviour Contact rating
50
Reed contact 1 change-over contact Bistable AC 230 V, 60 VA, 1 A DC 230 V, 30 W, 0.5 A For connection to control circuit per EN60947-5-6 Only for connection to a certified intrinsically safe circuit with max. 100 mA and max. 30 V Ignition protection type: II 1 G EEx ia IIC T6 - T3 LCIE 01 ATEX 6047 X Standard: with silicone cable: with coupler plug: Ex version: Connection cable (3 x 0.75 mm2) max. 90 C max. 150 C max. 85 C T6 to 85 C 1 m PVC blue 1 m PUR 1 m PVC grey
Sliding block for mounting on the left or right of the magnetic roller display
42
NAMUR circuit
100 16
Option Ex version
Ambient temperature
Pg 9 Pg 9
Electrical connection
30
25
Sliding block for mounting on the left or right of the magnetic roller display
188
100
16
42
Page 17 of 24
Sliding block
~80 30
25
Terminal box
50 100
100
Sliding block
16
Specifications
Contact Contact type Switch behaviour Contact rating NAMUR circuit Option Ex version Reed contact 1 change-over contact Bistable AC 230 V, 60 VA, 1 A DC 230 V, 30 W, 0.5 A For connection to control circuit per EN60947-5-6 Only for connection to a certified intrinsically safe circuit with max. 100 mA and max. 30 V Ignition protection type: II 1 G EEx ia IIC T6 - T3 LCIE 01 ATEX 6047 X Standard: Ex version: Terminal box Aluminium, anodised IP 65 per EN 60529 / lEC 529 max. 150 C T6 to 85 C T5 to 100 C T4 to 135 C T3 to 150 C
Specifications
Contact Contact type Switch behaviour Contact rating NAMUR circuit Ambient temperature Reed contact 1 change-over contact Bistable AC 230 V, 60 VA, 1 A DC 230 V, 30 W, 0.5 A For connection to control circuit per EN60947-5-6 T6 to 85 C T5 to 100 C T4 to 135 C T3 to 150 C Connection cable (3 x 0.75 mm2) 1 m PVC blue 1 m PVC grey
Electrical connection
Ambient temperature
Page 18 of 24
50
Sliding block for mounting on the left or right of the magnetic roller display
42
21,3 21,3
Mounting rod
Mounting rod
50
Mounting ring
Mounting ring
50
100
Switch point
Switch point
Specifications
Contact Contact type Switch behaviour Contact rating NAMUR circuit Option Ex version Reed contact 1 change-over contact Bistable AC 230 V, 60 VA, 1 A DC 230 V, 30 W, 0.5 A For connection to control circuit per EN60947-5-6 Only for connection to a certified intrinsically safe circuit with max. 100 mA and max. 30 V Ignition protection type: II 1 G EEx ia IIC T6 - T3 LCIE 01 ATEX 6047 X Standard: max. 90 C with silicone cable: max. 150 C Ex version: T6 to 85 C Connection cable (3 x 0.75 mm2) Housing Ingress protection 1 m PVC grey 1 m PVC blue 1 m silicone
Specifications
Contact Contact type Switch behaviour Contact rating NAMUR circuit Ambient temperature Reed contact 1 change-over contact Bistable AC 230 V, 60 VA, 1 A DC 230 V, 30 W, 0.5 A For connection to control circuit per EN60947-5-6 T6 to 85 C T5 to 100 C T4 to 135 C T3 to 150 C Connection cable (3 x 0.75 mm2) 1 m PVC grey 1 m PUR yellow 1 m PUR yellow with armour 1 m silicone Housing Ingress protection Stainless steel 1.4571 IP 68 per EN 60529 / lEC 529
Electrical connection
100
Page 19 of 24
80
80
~70
~67
M 20 x 1,5 75 75
M 20 x 1,5
~110
~110
Specifications
Contact Contact type Switch behaviour Contact rating NAMUR circuit Ambient temperature Electrical connection Housing Ingress protection Reed contact 1 change-over contact Bistable AC 230 V, 60 VA, 1 A DC 230 V, 30 W, 0.5 A For connection to control circuit per EN60947-5-6 max. 380 C Terminal box Aluminium IP 65 per EN 60529 / lEC 529
Specifications
Contact Contact type Switch behaviour Nominal voltage Max. residual ripple Power supply UB Current supply active area free active area covered Control cable - max. resistance Inductive proximity sensor SJ 3.5-SN High alarm Low alarm Bistable DC 8 V (Ri~1 kOhm) <5% 5 ... 25 V > 3 mA < 1 mA < 100 Ohm 160 H 20 nF Ambient temperature Housing Ingress protection -40 C to +100 C Aluminium IP 65 per EN 60529 / lEC 529
Page 20 of 24
100 %
Chip housing
0%
14
100%
Specifications
Electrical connection
Contact separation
Transmitter
22,5
80
without standard intrinsically safe HART intrinsically safe FOUNDATION Fieldbus / PROFIBUS PA
K 18 = 18 mm K 15 = 15 mm K 10 = 10 mm K 5 = 5 mm
Terminal box
Aluminium top Aluminium bottom Stainless steel top Stainless steel bottom Polyester top Polyester bottom
0%
100
M=
50
~92
75
Page 21 of 24
Torsion wave
100 %
Specifications
Electrical connection Sensor tube diameter Sensor tube length L Temperature range standard max. Sensor housing Stainless steel 1.4301 12 mm
M=... 30 52
Medium: -45 ... +125 C Sensor housing: -40 ... +85 C Option High and low temperature version: -200 ... +200 C T3 85 C 40 C T4 100 C 55 C T5 135 C 85 C T6 150 C 85 C
Sensor tube 12 mm
Ex version: Temperature class Process temperature, max. Ambient temperature at the sensor housing, max. Ex version: Signal and supply circuit
0%
In intrinsically safe version EEx ib IIC Ui < 30 V ; Ii < 200 mA ; Li < 250 H ; Ci < 5 nF 4 ... 20 mA, 2-wire DC 10 ... 30 V Adjustable to 3.6 mA or 21.5 mA < 0.5 mm < 0.1 mm 0.1 % (20 C) + 0.005 % / K 900 Ohm at UB = DC 30 V 650 Ohm at UB = DC 24 V 100 Ohm at UB = DC 12 V IP 68 per EN 60529 / lEC 529
Sensor housing
Power supply Error message Measuring accuracy Resolution Analogue component Load Ingress protection
Page 22 of 24
108
Output signal
L=...
6000 mm
50
Examples
8 2 process connections to DIN 11851 Lower process connection via eccentric reducer
Page 23 of 24
1 Welding cap
10 Flange connection e.g. sealing faces groove/tongue per DIN 2512 with drain plug G 1/2"
Ordering information Model / Version / Process connection / Bypass chamber diameter / Centre-to-centre distance M ... / Process specifications (operating temperature and working pressure, S.G.) / Contact separation / Electrical connection / Options
The specifications given in this document represent the state of engineering at the time of publishing. We reserve the right to make modifications to the specifications and materials.
Page 24 of 24
WIKA Alexander Wiegand SE & Co. KG Alexander-Wiegand-Strae 30 63911 Klingenberg/Germany Tel. (+49) 9372/132-0 Fax (+49) 9372/132-406 E-mail info@wika.de www.wika.de