Beruflich Dokumente
Kultur Dokumente
HAS-E, HAS-E-R, HAS-E-F HIS-N, HIS-RN Setting Tools HVU-TZ HAS-TZ, HAS-RTZ HIT-RE 500-SD
Page 228-229 Page 229 Page 231-232 Page 233 Page 234 Page 235 Page 236 Page 237 Page 238 Page 239 Page 240-241 Page 242-243 Page 243 Page 244
HIT-HY 150 Max HIT-HY 150 HIT-MM Plus, HIT-V, HIT-V-R HIT-HY 70 Injection System HIT-AC, HIT-ACR, HIT-IC HIT-S Mesh Sleeve
HIT-RE 500
Electronic Dispensers, AC Manual Dispensers, AC Pneumatic Dispensers Profi Kit, AC HIT Profi Accessories
HSL-3, HSL-3-B, HSL-3-G, HSL-G-R, HSL-3-SK HSC-A, HSC-AR, HSC-I, HSC-IR HST, HST-R
AM HSC Setting Tools, AM HSC Stop Drill Bits HSA, HSA-R, HSA-F
Page 252-253 Page 254-255 Page 255-256 Page 259-260 Page 261 Page 262-263 Page 264-265 Page 266 Page 267-268 Page 269-274 Page 275 Page 276 Page 277-279 Page 257- 258
HSD-M, Setting Tools, HKH, HPD HLC HLC-A, HLC-EC, HLC-EO, HLC-T, HLC-SK SI 100 Impact Screwdriver
Plastic anchors
Anchor Systems
Hilti. Outperform. Outlast.
Page 280-281 Page 281-283 Page 283 Page 284-285 Page 286-287 Page 287-288 Page 289 Page 292 Page 290-292
IZ,
*
www.hilti.com
Special items: Made to order. Allow longer delivery time. Kindly check with your Hilti representative.
08 Anchor Systems
218
Anchor Systems
Anchor Systems
Drill bit Specification Setting diameter resp. anchor size HCR Steel (1.4529) Through-fastening
Steel, galvanised
External thread
Cracked Concrete
Aerated concrete
Internal thread
Fire tested
Approval
Pre-setting
galvanised
Fastening through in-place parts l l l HSA/-R/-F S stud n Two setting depths Drill bit dia.: 6-20 mm l l l l l like wood beams, metal sections, anchor n Setting mark Anchor size: M6-M20 columns,brackets etc. n Extremely ductile steel for high bending capacity Temporary fastenings in concrete l l l l HLC sleeve anchor n Short setting/removing operation Drill bit dia.: 8-16 mm l l l (e.g. formwork), fastening in base- n Good load values in green concrete Anchor size: M6-M12 material of low density n Bridging of gaps Fastening with threaded rods for l1) l l l HKD push-in anchor pipe suspensions, air ducts, suspended ceilings
An intelligentexpansion section which adapts to suit the base material Drill bit dia.: 8-25 mm n l l l l n Visual verification of full expansion Anchor size: M8-M25 n Small setting depth n Screw driven straight into base material without using an anchor Drill bit dia.: 8-14 mm l n Forged on washer n Matched system of screw anchor and screwdriver
l = very suitable
219
08
Anchor Systems
220
Anchor Systems
Anchor Systems
Drill bit Specification Setting diameter resp. anchor size HCR Steel (1.4529) Through-fastening
l l
Steel, galvanised
External thread
Cracked Concrete
Aerated concrete
Internal thread
Fire tested
Approval
Suspension from concrete ceilings l1) l l l l DBZ wedge anchor n Small drill bit diameter Drill bit dia.: 6 mm l e.g. using steel straps, punched band, n Quick setting by impact extension Nonius system hanger n Automatic follow-up expansion For suspended ceilings and other l1) l l l l HA8 ring/hook anchor n Quick and easy setting Drill bit dia.: 8 mm l items from concrete ceilings n Automatic follow-up expansion
Various fastenings in hollow decks l l l HPD aerated concrete n Approved (DIBt) without predrilling l l l anchor n Fire resistance Thread: M6-M10 n Immediately loadable Suspension from pre-stressed l l l HKH hollow deck n Approval for single point fastenings Drill bit dia.: 10-14mm l l l l concrete hollow decks anchor n Approved for sprinkler systems Thread: M6-M10 Suspension from pre-stressed l l l HTW twin anchor n Approval for pre-stressed concrete hollow decks Drill bit dia.: 13 mm l l concrete hollow decks n Quick setting n No setting tools needed
Pre-setting
galvanised
8
Drill bit dia.: 8 mm l insulating material thickness: 10-150 mm Drill bit dia.: 8 mm l insulating material thickness up to 160 mm
Fastening of soft, non self supporting l l l IN insulation fastener n Reliable pressing on Drill bit dia.: 8 mm l insulating materials Fastening insulating material of hard l l l l l IDMS/IDMR metal n Quick and safe self supporting insulating material insulation fastener n Fire resistant where non flammable material is specified Drill bit dia.: 8 mm l l l insulating material thickness: up to 120 mm
Adhesive anchor in cracked concrete l l l l HIT-TZ injection n Easy setting M8-M20 l l l l adhesive anchor n Flexibilty in use and planning n Setting by hand
l = very suitable
221
08
Anchor Systems
222
Anchor Systems
Anchor Systems
resp. anchor size HCR Steel (1.4529) Through-fastening Steel, galvanised External thread Internal thread
Lightweight concrete
Uncracked concrete
Cracked Concrete
Aerated concrete
Drill bit
Specification
Setting
Heavy duty fastening with small spacings l l l l HVU adhesive n No expansion pressure and edge distances anchor n Small edge distances and spacings n A strong and flexible foil capsule Adhesive anchor for uncracked concrete l l l l HIT-RE 500 n No expansion pressure n Flexibility in terms of drill bit diameter and annular gap n Flexibility in terms of working time Medium duty anchors Adhesive anchor for uncracked concrete l l l l HIT-HY 150 n No expansion pressure n No styrene content n No plasticizer content n Environmental protection due to the minimized packaging Adhesive anchor for uncracked concrete l l HT-ICE n No expansion pressure n No styrene content n No plasticizer content
Fire tested
Approval
HAS/HAS-R M8-M39 l l l l l l HIS-N/HIS-RN M8-M20 rebar dia. 8-40 mm HAS/HAS-R M8 - M39 l l l l l l HIS-N/HIS-RN M8 - M20 rebar dia. 8 - 40mm
HAS/HAS-R M8-M24 l l l l l l HIS-N/HIS-RN M8-M20 rebar dia. 8-25 mm HAS/HAS-R M8-M24 l l l l l l HIS-N/HIS-RN M8-M20 rebar dia. 8-25 mm
Pre-setting
galvanised
Special anchors
Track fixing l l l HRA/HRC/HRT n EBA approval rail anchor n Serviceability tests done by the University of Munich n Complete support system HRT M22 dia. 26 HRC M22 dia. 22 HRA M22 dia. 22 l l l l l l l l l l
Securing and repairing l l l HWB cladding n Anchor takes up forces flexibly over large area via plastic ribs 22, 28 mm l industrially fabricated structures anchor n Small drill bit diameter (three layer-panels)
l = very suitable
223
08
Anchor Systems
www.hilti.com
www.hilti.com
08 Anchor Systems
224
Anchor Systems
Anchor Systems
Planting a tree is really quite easy. Use the right tool to dig a suitably-sized hole, clean out the surplus earth and place the tree in the hole. If you then give the young tree enough water it will take root and safely withstand all kinds of stress and strain, possibly even for hundreds of years. With the Hilti solution, making post-installed rebar connections is just as easy. Dig the hole. As secure as cast-in bars. For dependable concrete connections you should rely only on Hiltis well-proven and approved injectable adhesive mortars, simple but effective hole-cleaning aids and powerful rotary hammer drills. Hiltis highly experienced technical specialists are at your service round the clock and will be pleased to answer any questions. You thus have permanent access to over 25 years of practical experience in the field of post-installed rebar connections experience that will help you achieve extremely reliable connections and maximum cost efficiency.
With the Hilti solution, making post-installed rebar connections is just as easy as planting a tree. Fast The legendary Hilti combihammers and rotary hammers plus highly efficient Hilti dispensers let you work faster for longer. Easy Proper hole cleaning is decisive. With the Hilti Profi Rebar sets you have all the rebar installation accessories you need conveniently at hand. Reliable Post-installed reinforcing bars set in Hilti HIT are as secure and reliable as castin rebars. Accordingly, Hilti HIT systems have been officially approved for the applicable applications. Join the Hilti HIT professionals! Hilti provides special training on the use of Hilti HIT systems for post-installed rebar connections. Drill the hole quickly using a Hilti combihammer and suitable drill bits.
Clean the hole thoroughly using the cleaning aids from the Hilti profi rebar sets.
PS 200 Ferroscan
TE 70-ATC combihammer
225
08
Anchor Systems
www.hilti.com
www.hilti.com
08 Anchor Systems
226
Anchor Systems
Anchor Systems
Anchor rod HAS-E M8X80/14 Anchor rod HAS-E M8X80/54 Anchor rod HAS-E M10X90/21 Anchor rod HAS-E M10X90/61 Anchor rod HAS-E M10X90/81 Anchor rod HAS-E M12X110/28 Anchor rod HAS-E M12X110/88 Anchor rod HAS-E M12X110/128 Anchor rod HAS-E M12X110/168 Anchor rod HAS-E M16X125/20 Anchor rod HAS-E M16X125/38 Anchor rod HAS-E M16X125/108 Anchor rod HAS-E M16X125/148 Anchor rod HAS-E M16X125/198 Anchor rod HAS-E M16X125/348 Anchor rod HAS-E M20X170/48 Anchor rod HAS-E M20X170/68 Anchor rod HAS-E M20X170/108 Anchor rod HAS-E M20X170/158 Anchor rod HAS-E M20X170/208 Anchor rod HAS-E M24X210/54 Anchor rod HAS-E M27X240/60 Ordering
Order designation Hole depth Drill bit diameter Package quantity Item Number
10 mm 10 mm 12 mm 12 mm 12 mm 14 mm 14 mm 14 mm 14 mm 18 mm 18 mm 18 mm 18 mm 18 mm 18 mm 24 mm 24 mm 24 mm 24 mm 24 mm 28 mm 30 mm 35 mm 37 mm 40 mm 42 mm
80 mm 80 mm 90 mm 90 mm 90 mm 110 mm 110 mm 110 mm 110 mm 125 mm 125 mm 125 mm 125 mm 125 mm 125 mm 170 mm 170 mm 170 mm 170 mm 170 mm 210 mm 240 mm 270 mm 300 mm 330 mm 360 mm
106 mm 146 mm 125 mm 165 mm 185 mm 153 mm 213 mm 253 mm 293 mm 164 mm 182 mm 252 mm 292 mm 342 mm 492 mm 240 mm 260 mm 300 mm 350 mm 400 mm 290 mm 340 mm 380 mm 420 mm 460 mm 510 mm
14 mm 54 mm 21 mm 61 mm 81 mm 28 mm 88 mm 128 mm 168 mm 20 mm 38 mm 108 mm 148 mm 198 mm 348 mm 48 mm 68 mm 108 mm 158 mm 208 mm 54 mm 60 mm 70 mm 70 mm 90 mm 100 mm
20 pc 10 pc 20 pc 10 pc 10 pc 20 pc 10 pc 10 pc 10 pc 10 pc 20 pc 10 pc 10 pc 10 pc 10 pc 10 pc 10 pc 10 pc 10 pc 10 pc 10 pc 4 pc 4 pc 4 pc 2 pc 2 pc
00332219 00333099 00332220 00333100 00333101 00332221 00333102 00333103 00333104 00333105 00332222 00333106 00333107 00333108 00333109 00332223 00333110 00333111 00333112 00333113 00332224 00333114 00333115 00333116 00333117 00333118
nn Flexible foil capsule instead of glass: A robust product for real job site conditions nn One System for all Applications: A multitude of adhesive capsules, anchor rods, internally threaded sleeves in various diameters and lengths
Fields of Application
nn High load values for threaded rod and rebar for a broad range of applications like heavy duty fastenings in non-cracked concrete (steel structures, machinery, crash barriers, curtain wall structures, railings, etc.)
nn No expansion forces on concrete allows usage in applications with small edge distance and/or anchor spacing nn Fast curing for high productivity and fast threaded rod usage nn Arrowhead shaped capsules dont drop out of overhead holes
Base Material
Anchor rod HAS-E M30X270/70 Anchor rod HAS-E M33X300/80 Anchor rod HAS-E M36X330/90 Anchor rod HAS-E M39X360/100
Adhesive capsule HVU M8X80 Adhesive capsule HVU M10X90 Adhesive capsule HVU M10X135 Adhesive capsule HVU M12X110 Adhesive capsule HVU M12X165 Adhesive capsule HVU M16X125 Adhesive capsule HVU M16X190 Adhesive capsule HVU M20X170 Adhesive capsule HVU M20X255 Adhesive capsule HVU M24X210 Adhesive capsule HVU M27X240 Adhesive capsule HVU M30X270 Adhesive capsule HVU M33X300 Adhesive capsule HVU M36X330 Adhesive capsule HVU M39X360
80 mm 90 mm 135 mm 110 mm 165 mm 125 mm 190 mm 170 mm 255 mm 210 mm 240 mm 270 mm 300 mm 330 mm 360 mm
10 mm 12 mm 12 mm 14 mm 14 mm 18 mm 18 mm 24 mm 24 mm 28 mm 30 mm 35 mm 37 mm 40 mm 42 mm
10 pc 10 pc 20 pc 10 pc 20 pc 10 pc 10 pc 5 pc 5 pc 5 pc 4 pc pc 4 pc 2 pc 2 pc
00256691 00256692 00307914 00256693 00307915 00256694 00307916 00256695 00307917 00256696 00256697 00256698 00256699 00256700 00256701
227
08
Anchor Systems
www.hilti.com
www.hilti.com
08 Anchor Systems
228
Anchor Systems
Anchor Systems
Order designation
Special Item
Hole depth
Anchor length
Item Number
Anchor rod HAS-E-F M16X125/348 Anchor rod HAS-E-F M20X170/48 Anchor rod HAS-E-F M20X170/68 Material: Stainless steel A4-70 (1.4401)
Order designation Special Item Drill bit diameter Hole depth Anchor length Thickness fastened max Minimum order quantity Item Number
18 mm 24 mm 24 mm 24 mm
125 mm 170 mm 170 mm 170 mm 170 mm 170 mm 210 mm 240 mm 270 mm 300 mm 330 mm 360 mm
492 mm 240 mm 260 mm 300 mm 350 mm 400 mm 290 mm 340 mm 380 mm 420 mm 460 mm 510 mm
10 pc 10 pc 10 pc 10 pc 10 pc 10 pc 10 pc 4 pc 4 pc 4 pc 2 pc 2 pc
00333157 00333158 00333159 00333160 00333161 00333162 00333163 00333164 00333165 00333166 00333167 00333168
Anchor rod HAS-E-F M20X170/108 Anchor rod HAS-E-F M20X170/158 Anchor rod HAS-E-F M20X170/208 Anchor rod HAS-E-F M24X210/54 Anchor rod HAS-E-F M27X240/60 Anchor rod HAS-E-F M30X270/70 Anchor rod HAS-E-F M33X300/80 Anchor rod HAS-E-F M36X330/90 Anchor rod HAS-E-F M39X360/100 * *
24 mm 24 mm 28 mm 30 mm 35 mm 37 mm 40 mm 42 mm
Anchor rod HAS-E-R M8X80/14 Anchor rod HAS-E-R M8X80/54 Anchor rod HAS-E-R M8X80/114 Anchor rod HAS-E-R M10X90/21 Anchor rod HAS-E-R M10X90/61 Anchor rod HAS-E-R M10X90/81 Anchor rod HAS-E-R M10X90/111 Anchor rod HAS-E-R M12X110/28 Anchor rod HAS-E-R M12X110/88 Anchor rod HAS-E-R M12X110/128 Anchor rod HAS-E-R M12X110/168 Anchor rod HAS-E-R M16X125/108 Anchor rod HAS-E-R M16X125/148 Anchor rod HAS-E-R M16X125/198 Anchor rod HAS-E-R M16X125/20 Anchor rod HAS-E-R M16X125/38 Anchor rod HAS-E-R M20X170/48 Anchor rod HAS-E-R M20X170/108 Anchor rod HAS-E-R M24X210/54 Anchor rod HAS-E-R M27X240/60 Anchor rod HAS-E-R M30X270/70 Anchor rod HAS-E-R M33X300/80 Anchor rod HAS-E-R M36X330/90 Anchor rod HAS-E-R M39X360/100 * * * * * * * *
10 mm 10 mm 10 mm 12 mm 12 mm 12 mm 12 mm 14 mm 14 mm 14 mm 14 mm 18 mm 18 mm 18 mm 18 mm 18 mm 24 mm 24 mm 28 mm 30 mm 35 mm 37 mm 40 mm 42 mm
80 mm 80 mm 80 mm 90 mm 90 mm 90 mm 90 mm 110 mm 110 mm 110 mm 110 mm 125 mm 125 mm 125 mm 125 mm 125 mm 170 mm 170 mm 210 mm 240 mm 270 mm 300 mm 330 mm 360 mm
106 mm 146 mm 206 mm 125 mm 165 mm 185 mm 215 mm 153 mm 213 mm 253 mm 293 mm 252 mm 292 mm 342 mm 164 mm 182 mm 240 mm 300 mm 290 mm 340 mm 380 mm 420 mm 460 mm 510 mm
20 pc 10 pc 10 pc 20 pc 10 pc 10 pc 10 pc 20 pc 10 pc 10 pc 10 pc 10 pc 10 pc 10 pc 10 pc 20 pc 10 pc 10 pc 10 pc 4 pc 4 pc 4 pc 2 pc 2 pc
00333119 00333120 00333121 00333122 00333123 00333124 00333125 00333126 00333127 00333128 00333129 00333132 00333133 00333134 00333130 00333131 00333135 00333136 00333137 00333138 00333139 00333140 00333141 00333142
Int. threaded sleeve HIS-N M8X90 Int. threaded sleeve HIS-N M10X110 Int. threaded sleeve HIS-N M12X125 Int. threaded sleeve HIS-N M16X170 Int. threaded sleeve HIS-N M20X205
* * * * *
14 mm 18 mm 22 mm 28 mm 32 mm
10 pc 10 pc 5 pc 5 pc 5 pc
Special Item
Hole depth
Anchor length
Item Number
Anchor rod HAS-E-F M8X80/14 Anchor rod HAS-E-F M8X80/54 Anchor rod HAS-E-F M10X90/21 Anchor rod HAS-E-F M10X90/61 Anchor rod HAS-E-F M10X90/81 Anchor rod HAS-E-F M12X110/28 Anchor rod HAS-E-F M12X110/88 Anchor rod HAS-E-F M12X110/128 Anchor rod HAS-E-F M12X110/168 Anchor rod HAS-E-F M16X125/20 Anchor rod HAS-E-F M16X125/38 Anchor rod HAS-E-F M16X125/108 Anchor rod HAS-E-F M16X125/148 Anchor rod HAS-E-F M16X125/198 * * * * * *
10 mm 10 mm 12 mm 12 mm 12 mm 14 mm 14 mm 14 mm 14 mm 18 mm 18 mm 18 mm 18 mm 18 mm
106 mm 146 mm 125 mm 165 mm 185 mm 153 mm 213 mm 253 mm 293 mm 164 mm 182 mm 252 mm 292 mm 342 mm
20 pc 10 pc 20 pc 10 pc 10 pc 20 pc 10 pc 10 pc 10 pc 10 pc 20 pc 10 pc 10 pc 10 pc
00333143 00333144 00333145 00333146 00333147 00333148 00333149 00333150 00333151 00333152 00333153 00333154 00333155 00333156
www.hilti.com
Int. threaded sleeve HIS-RN M8X90 A4 Int. threaded sleeve HIS-RN M10X110 A4 Int. threaded sleeve HIS-RN M12X125 A4 Int. threaded sleeve HIS-RN M16X170 A4 Int. threaded sleeve HIS-RN M20X205 A4
14 mm 18 mm 22 mm 28 mm 32 mm
10 pc 10 pc 5 pc 5 pc 5 pc
229
08
Anchor Systems
www.hilti.com
08 Anchor Systems
230
Anchor Systems
Anchor Systems
Ordering:
Order Description Package quantity Item Number
Setting tool HIS-S M8 Setting tool HIS-S M10 Setting tool HIS-S M12 Setting tool HIS-S M16 Setting tool HIS-S M20
1 pc 1 pc 1 pc 1 pc 1 pc
TE-C E M8 to M16
Ordering
Order designation Minimum order quantity Item Number
Setting tool TE-C-E M8 Setting tool TE-C-E M10 Setting tool TE-C-E M12 (1/2) Setting tool TE-C-E M16 (5/8)
1 pc 1 pc 1 pc 1 pc
3/4" - Sw M27 (Sw = 41) M30 (Sw = 46) M33 (Sw = 50) M36 (Sw = 55) M39 (Sw = 59)
TE-FY 3/4"
Setting tool TE-T-E M12 (1/2) Setting tool TE-T-E M16 (5/8) Setting tool TE-T-E M20 (3/4)
1 pc 1 pc 1 pc
HIS-S M8 to M20
Setting tool TE-Y-E M16 Setting tool TE-Y-E M20 Setting tool TE-Y-E M24
1 pc 1 pc 1 pc
TE-FY 3/4"
231
08
Anchor Systems
www.hilti.com
www.hilti.com
08 Anchor Systems
232
Anchor Systems
Anchor Systems
The first adhesive anchor with foil capsule suitable for use in cracked concrete.
Galvanized min. 5m
Anchor rod HAS-TZ M10X75/15 Anchor rod HAS-TZ M10X75/30 Anchor rod HAS-TZ M10X75/50 Anchor rod HAS-TZ M12X95/25 Anchor rod HAS-TZ M12X95/50 Anchor rod HAS-TZ M12X95/100 Anchor rod HAS-TZ M16X105/30 Anchor rod HAS-TZ M16X105/60 Anchor rod HAS-TZ M16X105/100 Anchor rod HAS-TZ M16X125/30 Anchor rod HAS-TZ M16X125/60 Anchor rod HAS-TZ M16X125/100 Anchor rod HAS-TZ M20X170/40
12 mm 12 mm 12 mm 14 mm 14 mm 14 mm 18 mm 18 mm 18 mm 18 mm 18 mm 18 mm 25 mm
90 mm 90 mm 90 mm 110 mm 110 mm 110 mm 125 mm 125 mm 125 mm 145 mm 145 mm 145 mm 195 mm
124 mm 139 mm 159 mm 158 mm 183 mm 233 mm 181 mm 211 mm 251 mm 201 mm 231 mm 271 mm 269 mm
10 pc 10 pc 10 pc 10 pc 10 pc 10 pc 5 pc 5 pc 5 pc 5 pc 5 pc 5 pc 4 pc
00310018 00308383 00308384 00308385 00308386 00308387 00308388 00308389 00308390 00332519 00332520 00332521 00335943
nn HVZ combines highest performance in chemical anchors with an unparalleled level of safety nn Offers all round flexibility in application and installation: Insensitive to frequently made application errors e.g. poor hole cleaning nn Flexible foil capsule instead of glass nn HAS-RTZ rods are available in various grades of steel ensuring versatility for a wide range of applications
Fields of Application
nn Heavy duty fastenings in steel structures, machinery, crash barriers, curtain wall structures, railings.
nn Suitable for dynamic loading subject to fatigue, shock and seismic activity nn Can be used in the cracked tension zone of concrete components
nn High loading in cracked concrete, even in small edge distances and spacing
Base Material
nn Concrete
Order designation
Special Item
Hole depth
Anchor length
Item Number
* * * * * * * * * * * * * *
12 mm 12 mm 12 mm 14 mm 14 mm 14 mm 14 mm 18 mm 18 mm 18 mm 18 mm 18 mm 18 mm 25 mm
90 mm 90 mm 90 mm 110 mm 110 mm 110 mm 110 mm 125 mm 125 mm 125 mm 145 mm 145 mm 145 mm 195 mm
124 mm 139 mm 159 mm 158 mm 173 mm 183 mm 233 mm 181 mm 211 mm 251 mm 201 mm 231 mm 271 mm 269 mm
10 pc 10 pc 10 pc 10 pc 10 pc 10 pc 10 pc 5 pc 5 pc 5 pc 5 pc 5 pc 5 pc 4 pc
00310019 00308391 00308392 00308393 00333769 00308394 00308395 00308396 00308397 00308398 00332522 00332523 00332524 00335944
Anchor rod HAS-RTZ M10X75/30 Anchor rod HAS-RTZ M10X75/50 Anchor rod HAS-RTZ M12X95/25 Anchor rod HAS-RTZ M12X95/40
tgel
tcure
Tinst
Injection washer
Anchor rod HAS-RTZ M12X95/50 Anchor rod HAS-RTZ M12X95/100 Anchor rod HAS-RTZ M16X105/30 Anchor rod HAS-RTZ M16X105/60 Anchor rod HAS-RTZ M16X105/100 Anchor rod HAS-RTZ M16X125/30 Anchor rod HAS-RTZ M16X125/60 Anchor rod HAS-RTZ M16X125/100 Anchor rod HAS-RTZ M20X170/40
nn This ensures that the applied shear load is distributed evenly on to all anchors
nn Prevents local stress raisers if hole is not drilled square to surface nn Prevents nut from working loose under vibration
Anchor size
Hole depth
Package quantity
Item Number
Adhesive capsule HVU-TZ M10 Adhesive capsule HVU-TZ M12 Adhesive capsule HVU-TZ M16 Adhesive capsule HVU-TZ M20
12 mm 14 mm 18 mm 25 mm
10 pc 10 pc 10 pc 4 pc
233
08
Anchor Systems
www.hilti.com
www.hilti.com
08 Anchor Systems
234
Anchor Systems
Anchor Systems
Ordering
Order Description Package quantity Item Number
Setting tool TE-C HEX M8 Setting tool TE-C HEX M10 Setting tool TE-C HEX M12 Setting tool TE-C HEX M16 Setting tool TE-Y HEX M20
1 pc 1 pc 1 pc 1 pc 1 pc
Fields of Application
nn Variable anchorage depths (4 - 20 x anchor rod diameter) depending on load nn Anchors can be set in narrow members and close to edges nn Standard HIT-V anchor rods for cracked concrete nn Cost advantages over special rods
nn Anchoring steel structures, machines, conveyor systems, crash barriers, storage systems, noise-reduction walls, stairs, ideal for concrete overlay shear connectors and structural joints and seismic applications nn Anchoring of secondary steel structures (e.g. staircases, steel ledgers, ) nn Anchoring of railings/safety barriers nn Structural connections with post-installed rebars
nn Wide range of approved fasteners nn One mortar for all types nn HIS-N Threaded sleeves
Dynamic set M10 Dynamic set M12 Dynamic set M16 Dynamic set M20
2 pc 2 pc 2 pc 2 pc
nn 8 - 32 mm Diameter rebar used as anchors nn HIT-V Anchor rods, M8 to M30 nn Easy manual setting operation nn No setting tools required nn Approved for seismic applications
Base material
nn Works like cast in with post-installed rebars with quick and reliable design with Hilti PROFIS softwares
Injectable mortar HIT-RE 500-SD/330/1 Injectable mortar HIT-RE 500-SD/500/1 Injectable mortar HIT-RE 500-SD/1400/1
25 pc 20 pc 4 pc
235
08
Anchor Systems
www.hilti.com
www.hilti.com
08 Anchor Systems
236
Anchor Systems
Anchor Systems
The high performance injection adhesive system for reinforcement bars and threaded rod applications in concrete.
nn One of the strongest injection systems in the market with ETA approval for reduced rebar embedment depth range
Fields of Application
nn No expansion forces in concrete allow for secure applications even close to the edges and/or with small spacing
nn Any high performance concrete fastenings such as - rebar connections and repair work nn For fastening of threaded rod, sockets and rebar diameter ranging from 8 mm to 40 mm into concrete nn Ideal solution for diamond cored and wet bore holes or oversized holes nn Wet or underwater anchoring applications
nn Suitable for cracked and uncracked concrete with all anchoring elements
Fields of Application
nn Low sensitivity to oversized, wet holes due to negligible shrinkage and adhesive property thus less risk of installation failure nn Long working time, therefore always enough time for aligning work and installation of big diameters at deep embedment
nn Faster curing to boost application productivity: design loads are achieved after only 30 minutes at 20C nn Works like cast in with post-installed rebars nn Free of styrene and plasticizers, low odor, reduced waste
nn Anchoring of secondary steel structures (e.g. staircases, steel ledgers, ) nn Anchoring of railings/safety barriers nn Structural connections with post-installed rebars
nn Easy setting in a wide range of temperature and long working time even at elevated temperature
Base Material
Base material
8
330 ml 330 ml 500 ml 1400 ml 1 2 2 1 25 pc 20 pc 20 pc 4 pc 00298124 00298119 00298220 00298294
Injectable mortar HIT-HY 150 MAX 330/1 Injectable mortar HIT-HY 150 MAX 330/2 Injectable mortar HIT-HY 150 MAX 500/2 Injectable mortar HIT-HY 150 MAX 1400
Injectable mortar HIT-RE 500/1100/1 Injectable mortar HIT-RE 500/330/1 Injectable mortar HIT-RE 500/330/1 (25) Injectable mortar HIT-RE 500/500/1 (20) Injectable mortar HIT-RE 500/1400/1
1 pc 1 pc 1 pc 1 pc 4 pc
Ordering
Order Description Package quantity Item Number
Mixer HIT-RE-M
1 pc
00337111
237
08
Anchor Systems
www.hilti.com
www.hilti.com
08 Anchor Systems
238
Anchor Systems
Anchor Systems
The universal medium-duty adhesive anchor mortar for use in a wide range of materials
nn High loading capacity and optional displacement behaviour ensures high security even to the edges
Fields of Application
nn Unique hybrid formulation provides excellent long term performance, high fire rating and wide range of service temperature nn Non hazardous recipe ensures safe and odourless work, also in closed rooms nn No waste
nn Rebar applications: Structural connections (e.g. walls, slabs, stairs), Structural repair, Variations to design, Bridge extensions, Road widening, Refurbishments / retrofitting
Fields of Application
nn Easy dispensing thanks to well-proven manual, cordless and pneumatic dispensers nn Unique soft foil pack for less waste nn Contains no styrene or other blacklisted substances and is virtually odorless nn Partly-used cartridges can be reused after a break simply by fitting a new mixing nozzle
nn For use with connectors, anchor rods, internally threaded sleeves and reinforcing bars up to maximum of 25 mm diameter
nn Wide range of fastening applications in the medium load range in hollow block, solid block and concrete where no approval is required
nn Top quality dispensers and optimised viscosity allow ergonomic and comfortable handling and dispensing
nn Anchoring applications: Structural steel (e.g. columns, beams), Railings (e.g. balconies, hand rails), Faade work / curtain walling, Heavy industrial equipment / dynamic loading, Seismic retrofitting, Sound and crash barriers
nn Fence and railing posts, gates, window gratings, wall cabinets, bathroom fittings, air conditioning systems, lights nn Suitable for frequent, repetitive use
Base Material
nn New Hilti HIT-SC composite sleeve with dosing system for less waste on hollow materials
Base material
8
Ordering
Order Description Content per can/cartridge Number of mixers included Package quantity Item Number
Injectable mortar HIT-MM PLUS 330/1 Injectable mortar HIT-MM PLUS 500/1 Nozzle CS-280-D5 (10)
25 pc 20 pc
Injectable mortar HIT-HY 150 330/0 Injectable mortar HIT-HY 150 330/1/VL Injectable mortar HIT-HY 150 330/2 Injectable mortar HIT-HY 150 500/2 Injectable mortar HIT-HY 150 1400/1/VL
1 pc 1 pc 1 pc 1 pc 4 pc
Hole depth
Anchor length
Package quantity
Item Number
Anchor rod HIT-V-5.8 M8x80 Anchor rod HIT-V-5.8 M8x110 Anchor rod HIT-V-8.8 M8X150 Anchor rod HIT-V-5.8 M10x95 Anchor rod HIT-V-5.8 M10x115
10 mm 10 mm 10 mm 12 mm 12 mm
60 mm 80 mm 80 mm 90 mm 90 mm
20 mm 50 mm 90 mm 35 mm 55 mm
20 20 20 10 10
239
08
Anchor Systems
www.hilti.com
www.hilti.com
08 Anchor Systems
240
Anchor Systems
Anchor Systems
Order designation
Hole depth
Anchor length
Package quantity
Item Number
Anchor rod HIT-V-5.8 M10x130 Anchor rod HIT-V-8.8 M10X190 Anchor rod HIT-V-5.8 M12x110 Anchor rod HIT-V-5.8 M12x120 Anchor rod HIT-V-5.8 M12x150 Anchor rod HIT-V-8.8 M12X220 Anchor rod HIT-V-8.8 M12X280 Anchor rod HIT-V-5.8 M16x150 Anchor rod HIT-V-5.8 M16x200 Anchor rod HIT-V-5.8 M16x300 Anchor rod HIT-V-8.8 M16X380 Anchor rod HIT-V-5.8 M20x180 Anchor rod HIT-V-5.8 M20x260 Anchor rod HIT-V-5.8 M20x380 Anchor rod HIT-V-5.8 M20x480 Anchor rod HIT-V-5.8 M24x300 Anchor rod HIT-V-5.8 M24x450
12 mm 12 mm 14 mm 14 mm 14 mm 14 mm 14 mm 18 mm 18 mm 18 mm 18 mm 24 mm 24 mm 24 mm 24 mm 28 mm 28 mm
90 mm 90 mm 110 mm 110 mm 110 mm 110 mm 110 mm 125 mm 125 mm 125 mm 125 mm 170 mm 170 mm 170 mm 170 mm 210 mm 210 mm
130 mm 190 mm 110 mm 120 mm 150 mm 220 mm 280 mm 150 mm 200 mm 300 mm 380 mm 180 mm 260 mm 380 mm 480 mm 300 mm 450 mm
70 mm 90 mm 40 mm 50 mm 80 mm 150 mm 210 mm 70 mm 120 mm 220 mm 310 mm 90 mm 170 mm 290 mm 390 mm 200 mm 350 mm
10 10 10 10 10 10 10 5 5 5 5 10 10 10 10 5 5
00387058 00387059 00387060 00387147 00387061 00387062 00387063 00387064 00387065 00387066 00387067 00387068 00387069 00387070 00387071 00387072 00387073
nn Hiltis unique, combinable, corrosion free, composite mesh sleeve provides flexible embedment depths and variable loads in spite of fewer parts nn Optimized application, comfortable and flexible for indoor and outdoor applications, as well as for use in dry and wet drilled holes
Fields of Application
nn Steel bracing nn Sun shades nn Escalators nn Wall ties
nn Can be used at any time of year in a temperature range between -5 and +40 C
nn Fastenings are free of expansion forces and approved by technical approval departments
Base Material
nn Brick (hollow), Brick (solid), Concrete (aereated), Sand-lime stone, Stone (hard natural)
Anchor rod HIT-V-R M8X80 Anchor rod HIT-V-R M8X110 Anchor rod HIT-V-R M8X150 Anchor rod HIT-V-R M10X95 Anchor rod HIT-V-R M10X115 Anchor rod HIT-V-R M10X130 Anchor rod HIT-V-R M10X190 Anchor rod HIT-V-R M12X110 Anchor rod HIT-V-R M12X120 Anchor rod HIT-V-R M12X150 Anchor rod HIT-V-R M12X220 Anchor rod HIT-V-R M12X280 Anchor rod HIT-V-R M16X150 Anchor rod HIT-V-R M16X200 Anchor rod HIT-V-R M16X300 Anchor rod HIT-V-R M16X380 Anchor rod HIT-V-R M20X180 Anchor rod HIT-V-R M20X260 Anchor rod HIT-V-R M20X380 Anchor rod HIT-V-R M20X480 Anchor rod HIT-V-R M24X300 Anchor rod HIT-V-R M24X450
10 mm 10 mm 10 mm 12 mm 12 mm 12 mm 12 mm 14 mm 14 mm 14 mm 14 mm 14 mm 18 mm 18 mm 18 mm 18 mm 24 mm 24 mm 24 mm 24 mm 28 mm 28 mm
60 mm 80 mm 80 mm 90 mm 80 mm 90 mm 90 mm 110 mm 90 mm 110 mm 110 mm 110 mm 125 mm 125 mm 125 mm 125 mm 170 mm 170 mm 170 mm 170 mm 210 mm 210 mm
80 mm 110 mm 150 mm 95 mm 115 mm 130 mm 190 mm 110 mm 120 mm 150 mm 220 mm 280 mm 150 mm 200 mm 300 mm 380 mm 180 mm 260 mm 380 mm 480 mm 300 mm 450 mm
20 mm 50 mm 90 mm 35 mm 55 mm 70 mm 130 mm 40 mm 50 mm 80 mm 150 mm 210 mm 70 mm 120 mm 220 mm 300 mm 90 mm 170 mm 290 mm 390 mm 200 mm 350 mm
20 20 20 10 10 10 10 10 10 10 10 10 5 5 5 5 10 10 10 10 5 5
00387074 00387075 00387076 00387077 00387148 00387078 00387079 00387080 00387149 00387081 00387082 00387083 00387084 00387085 00387086 00387087 00387150 00387088 00387089 00387151 00387152 00387153 Ordering
Order Description Content per can/cartridge Number of mixers included Package quantity Item Number
Injectable mortar HIT-HY 70 1400/1 Injectable mortar HIT-HY 70 330/2 Injectable mortar HIT-HY 70 500/1 MV Injectable mortar HIT-HY 70 500/2
1 2 1 2
4 pc 20 pc 20 pc 20 pc
241
08
Anchor Systems
www.hilti.com
www.hilti.com
08 Anchor Systems
242
Anchor Systems
Anchor Systems
Anchor rod HIT-AC-R M8x80/16 Anchor rod HIT-AC-R M10x80/20 Anchor rod HIT-AC-R M12x80/23
10 mm 12 mm 14 mm
80 mm 80 mm 80 mm
16 mm 20 mm 23 mm
20 pc 10 pc 10 pc
Galvanized min. 5m
Hole depth
Anchor length
Item Number
Anchor rod HIT-AC M6x80/14 Anchor rod HIT-AC M8x80/16 Anchor rod HIT-AC M10x80/20 Anchor rod HIT-AC M12x80/23
8 mm 10 mm 12 mm 14 mm
80 mm 80 mm 80 mm 80 mm
14 mm 16 mm 20 mm 23 mm
20 pc 20 pc 10 pc 10 pc
8
16 mm 16 mm 18 mm 18 mm 22 mm 22 mm 50 mm 80 mm 50 mm 80 mm 50 mm 80 mm 10 pc 10 pc 10 pc 10 pc 10 pc 10 pc 00047938 00047935 00047939 00047936 00047940 00047937
Material: Plastic
Int. threaded sleeve HIT-IC M8x50 Int. threaded sleeve HIT-IC M8x80 Int. threaded sleeve HIT-IC M10x50 Int. threaded sleeve HIT-IC M10x80 Int. threaded sleeve HIT-IC M12x50 Int. threaded sleeve HIT-IC M12x80
Order designation
Hole depth
Item Number
Mesh sleeve HIT-S 16 Mesh sleeve HIT-SC 12X50 Mesh sleeve HIT-SC 12X85 Mesh sleeve HIT-SC 16X50 Mesh sleeve HIT-SC 16X85 Mesh sleeve HIT-SC 20X85 Mesh sleeve HIT-SC 22x50 Mesh sleeve HIT-SC 22x85
90 mm 60 mm 95 mm 60 mm 95 mm 90 mm 60 mm 95 mm
16 mm 12 mm 12 mm 16 mm 16 mm 20 mm 22 mm 22 mm
10 pc 20 pc 20 pc 20 pc 20 pc 20 pc 20 pc 10 pc
243
08
Anchor Systems
www.hilti.com
www.hilti.com
08 Anchor Systems
244
Anchor Systems
Anchor Systems
Ordering
Order Description Package quantity Item Number
Cordless dispenser BD 2000 Cordless dispenser BD 2000 Basic Cordless dispenser BD 2000 kit Dispenser ED 3500 Basic kit Dispenser ED 3500 EU Dispenser ED 3500 EU kit
1 pc 1 pc 1 pc 1 pc 1 pc 1 pc
Dispenser MD 2500
nn Comprehensive sets of accessories for maximising your HIT performances and productivity gain
Fields of Application
nn Great opportunity to customise your HIT installation equipment according to your application needs nn Increased system safety in all installation directions and conditions Order Description HIT Premium Rebar case Function
nn Unique and approved system for safe installation of rebar and anchoring elements up to 40 mm in diameter and 3200 mm in embedment depth
Order designation
Item Number
Dispenser MD 1000 Dispenser MD 2000 Dispenser MD 2000 kit Dispenser MD 2500 box Dispenser MD 2500 cas Dispenser MD 300
1 pc 1 pc 1 pc 1 pc 1 pc 1 pc
The Hilti HIT premium set for the rebar professionals who perform post-installation of rebars in the most challenging situations, with all the required accessories to post-install rebars up to 25 mm and 2500 mm in embedment depth. The Hilti HIT set for professionals who would like to go beyond in their anchoring work with Hilti HIT, optimising the load bearing capacity of the system and reaching maximum productivity in serial applications. Ideal for installation of anchoring elements up to 20 mm in diameter and 250 mm in embedment depth. The Hilti HIT set for those professionals who often encounter rebar installation in their daily business, with all required equipment to post-install rebars up to 20 mm and 800 mm in embedment depth. Compact, versatile and complete to make best use of the Hilti HIT rebar system and gain productivity in the most common applications.
Ordering
Order designation Minimum order quantity Item Number
Dispenser P 8000 D
1 pc
00373959
Ordering
Order Description Accessory kit HIT Premium Rebar case Package content Content: case, installation instructions, installation report, drilling aid, compressed-air connector, blowing extension hoses and tubes, air nozzles DL 12-32 (for rebar diameter 8-25), holders TE-Y and TE-C, brush extensions RBS, round steel brushes RB 12-32 (for rebar diameter 8-25), injection extension hoses and tubes, piston plugs SZ 12-32 (for rebar diameter 8-25), markers, thermometer, rebar saw Content: case, installation instructions, blow-out gun, holder TE-C, brush extension RBS 10/0.35, manual brush handle, round steel brushes RB 10-24 (for threaded rods M10-M20), manual dispenser MD 2500 Content: case, installation instructions, installation report, blow-out gun, blowing extension hoses, air nozzles DL 12-25 (for rebar diameter 820), holders TE-Y and TE-C, brush extensions RBS, manual brush extension and handle, round steel brushes RB 12-25 (for rebar diameter 8-20), manual dispenser MD 2500, injection extension hoses, piston plugs SZ 12-25 (for rebar diameter 8-20) Item Number 00384753
Accessory kit HIT Profi Anchor case Accessory kit HIT Profi Rebar case
00384752 00274888
245
08
Anchor Systems
www.hilti.com
www.hilti.com
08 Anchor Systems
246
Anchor Systems
Anchor Systems
Accessories
AC HIT Profi
Accessories
AC HIT Profi
Order Description Case HIT Premium Rebar Case HIT Profi Assembly instructions HIT Profi Installation report HIT Profi Blow-out gun G 1/4 Extension hose HIT-DL 10/0.8 Extension hose HIT-DL 16/0.8 Connecting piece HIT-DL A Coupler HIT-DL K Connecting piece HIT-DL V10/1 n n n n n n n n n n
Item Number 00384759 00384757 00384756 00384755 00381215 00038251 00038252 00336643 00038250 00336644
Order Description Round steel brush HIT-RB 12 Round steel brush HIT-RB 14 Round steel brush HIT-RB 16 Round steel brush HIT-RB 18 Round steel brush HIT-RB 20 Round steel brush HIT-RB 25 Round steel brush HIT-RB 32 Extension hose PE 1M Coupler VL-K Piston plug HIT-SZ 12 Piston plug HIT-SZ 14 n n n n n n n n n n n n n n n n
Item Number 00336548 00336549 00336550 00336551 00336552 00336553 00336554 00024632 00335021 00335022 00335023 00335024 00335025 00335026 00335027 00335028
n n
00371714 00336646
Extension hose HIT-VL 16 Air nozzle HIT-DL 12 Air nozzle HIT-DL 14 Air nozzle HIT-DL 16 Air nozzle HIT-DL 18 Air nozzle HIT-DL 20 Air nozzle HIT-DL 25 Air nozzle HIT-DL 32 Brush extension HIT-RBS 10/0.7 Brush extension HIT-RBS-10/0.35 Holder TE-C Holder TE-Y
n n n n n n n n n n n n
00038249 00371715 00371716 00371717 00371718 00371719 00371720 00371721 00336645 00371722 00263437 00263439
247
08
Anchor Systems
www.hilti.com
www.hilti.com
08 Anchor Systems
248
Anchor Systems
Anchor Systems
Self-undercutting mechanical anchor for heavy duty and safety fastenings into concrete.
Undercut anchor HDA-PR 20-M10x100/20 Undercut anchor HDA-PR 22-M12x125/30 Undercut anchor HDA-PR 22-M12x125/50 Undercut anchor HDA-PR 30-M16x190/40 Undercut anchor HDA-PR 30-M16x190/60
20 mm 22 mm 22 mm 30 mm 30 mm 20 mm 22 mm 22 mm 30 mm 30 mm
107 mm 133 mm 133 mm 203 mm 203 mm 107 mm 134.5 mm 134.5 mm 203 mm 203 mm
150 mm 190 mm 210 mm 275 mm 295 mm 150 mm 190 mm 210 mm 275 mm 295 mm
20 mm 30 mm 50 mm 40 mm 60 mm 20 mm 30 mm 50 mm 40 mm 60 mm
12 pc 8 pc 8 pc 4 pc 4 pc 12 pc 8 pc 8 pc 4 pc 4 pc
00339346 00339347 00339348 00339349 00339350 00339351 00339352 00339353 00339354 00339355
nn Self-undercutting anchor: Simple and quick undercutting operation results in a keying effect for maximum security even in cracked concrete
Fields of Application
Undercut anchor HDA-TR 20-M10x100/20 Undercut anchor HDA-TR 22-M12x125/30 Undercut anchor HDA-TR 22-M12x125/50 Undercut anchor HDA-TR 30-M16x190/40 Undercut anchor HDA-TR 30-M16x190/60
nn Allows small spacing and edge distances: Low expansion forces - performs like a cast-in headed stud nn Simple installation: No complicated specialized undercutting tools required nn Load can be applied immediately after setting nn Fully removable
nn Anchor fastenings for high loads and most stringent safety requirements e.g. in power plant and installation construction , securing heavy machinery and machines nn Fastenings subject to dynamic loading, e.g. fatigue, seismic or shock nn Heavy-duty fastenings under high tensile or shear loads
Base Material
8
Ordering Material: Steel grade 8.8
Order designation Drill bit diameter Anchor length Thickness fastened - max Minimum order quantity Item Number
Ordering 20 mm 22 mm 22 mm 30 mm 30 mm 37 mm 37 mm 20 mm 22 mm 22 mm 30 mm 30 mm 37 mm 37 mm 150 mm 190 mm 210 mm 275 mm 295 mm 360 mm 410 mm 150 mm 190 mm 210 mm 275 mm 295 mm 360 mm 410 mm 20 mm 30 mm 50 mm 40 mm 60 mm 50 mm 100 mm 20 mm 30 mm 50 mm 40 mm 60 mm 50 mm 100 mm 12 pc 8 pc 8 pc 4 pc 4 pc 2 pc 2 pc 12 pc 8 pc 8 pc 4 pc 4 pc 2 pc 2 pc 00331544 00331546 00331547 00331550 00331551 00339265 00339266 00331545 00331548 00331549 00331552 00331553 00339267 00339268
Order Description Package quantity Item Number
Undercut anchor HDA-P 20-M10x100/20 Undercut anchor HDA-P 22-M12x125/30 Undercut anchor HDA-P 22-M12x125/50 Undercut anchor HDA-P 30-M16x190/40 Undercut anchor HDA-P 30-M16x190/60 Undercut anchor HDA-P 37-M20x250/50 Undercut anchor HDA-P 37-M20x250/100 Undercut anchor HDA-T 20-M10x100/20 Undercut anchor HDA-T 22-M12x125/30 Undercut anchor HDA-T 22-M12x125/50 Undercut anchor HDA-T 30-M16x190/40 Undercut anchor HDA-T 30-M16x190/60 Undercut anchor HDA-T 37-M20x250/50 Undercut anchor HDA-T 37-M20x250/100
Setting tool TE-C-HDA-ST20-M10 Setting tool TE-C-HDA-ST22-M12 Setting tool TE-Y HDA-ST 20-M10 Setting tool TE-Y HDA-ST 22-M12 Setting tool TE-Y-HDA ST30-M16 Setting tool TE-Y-HDA-ST37-M20
1 pc 1 pc 1 pc 1 pc 1 pc 1 pc
249
08
Anchor Systems
www.hilti.com
www.hilti.com
08 Anchor Systems
250
Anchor Systems
Anchor Systems
Stop Drill Bit for HDA Anchor TE-C HDA/ TE-Y HDA
ETA Approved expansion anchor for heavy loads, for use in dynamic applications and cracked concrete (galvanized version).
Ordering
Order Description Package quantity Item Number
Stop drill bit TE-C-HDA-B 20x100 Stop drill bit TE-C-HDA-B 20x120 Stop drill bit TE-C-HDA-B 22x125 Stop drill bit TE-C-HDA-B 22x155 Stop drill bit TE-C-HDA-B 22x175 Stop drill bit TE-Y-HDA-B 20x100 Stop drill bit TE-Y-HDA-B 20x120 Stop drill bit TE-Y-HDA-B 22x125 Stop drill bit TE-Y-HDA-B 22x155 Stop drill bit TE-Y-HDA-B 22x175 Stop drill bit TE-Y-HDA-B 22x215 Stop drill bit TE-Y-HDA-B 30x190 Stop drill bit TE-Y-HDA-B 30x230 Stop drill bit TE-Y-HDA-B 30x250 Stop drill bit TE-Y-HDA-B 37x250 Stop drill bit TE-Y-HDA-B 37x300 Stop drill bit TE-Y-HDA-B 37x350
1 pc 1 pc 1 pc 1 pc 1 pc 1 pc 1 pc 1 pc 1 pc 1 pc 1 pc 1 pc 1 pc 1 pc 1 pc 1 pc 1 pc
00332089 00332090 00402050 00402056 00402060 00237449 00237450 00402055 00402058 00402062 00402064 00332097 00332098 00332099 00339270 00339271 00339272
nn High load capacity: Steel spacer sleeve allows use of fewer fasteners in high shear load applications
Fields of Application
nn Black plastic section stops turning in hole during setting and collapses for a flush baseplate-to-surface fit nn Heavy-duty expansion sleeve allows for installations in Hilti matched tolerance diamond cored holes nn Embedment depth mark for easy setting nn Extensive range of approvals and technical back-up
nn Any kind of heavy-duty, high-safety application especially where cracked concrete is an issue or extensive approvals back-up is required nn Dynamic conditions e.g. with vibratory or windy conditions
nn Fastening heavy loads e.g. from columns, machines, apparatus etc nn Nuclear power projects, Telecom, Heavy industrial, Power generation, Infrastructure, Tunnelling, Stadiums, Roof/ building structures
Base Material
Heavy-duty anchor HSL-3 M8/5 Heavy-duty anchor HSL-3 M8/20 Heavy-duty anchor HSL-3 M8/40 Heavy-duty anchor HSL-3 M10/5 Heavy-duty anchor HSL-3 M10/20 Heavy-duty anchor HSL-3 M10/40 Heavy-duty anchor HSL-3 M12/5 Heavy-duty anchor HSL-3 M12/25 Heavy-duty anchor HSL-3 M12/50 Heavy-duty anchor HSL-3 M16/10 Heavy-duty anchor HSL-3 M16/25 Heavy-duty anchor HSL-3 M16/50 Heavy-duty anchor HSL-3 M20/10 Heavy-duty anchor HSL-3 M20/30 Heavy-duty anchor HSL-3 M20/60 Heavy-duty anchor HSL-3 M24/10 Heavy-duty anchor HSL-3 M24/30 Heavy-duty anchor HSL-3 M24/60 2 pc 2 pc 2 pc 2 pc 00369201 00369202 00369203 00369204
12 mm 12 mm 12 mm 15 mm 15 mm 15 mm 18 mm 18 mm 18 mm 24 mm 24 mm 24 mm 28 mm 28 mm 28 mm 32 mm 32 mm 32 mm
80 mm 80 mm 80 mm 90 mm 90 mm 90 mm 105 mm 105 mm 105 mm 125 mm 125 mm 125 mm 155 mm 155 mm 155 mm 180 mm 180 mm 180 mm
83 mm 98 mm 118 mm 95 mm 110 mm 130 mm 111 mm 131 mm 156 mm 138 mm 153 mm 178 mm 163 mm 183 mm 213 mm 185 mm 205 mm 235 mm
5 mm 20 mm 40 mm 5 mm 20 mm 40 mm 5 mm 25 mm 50 mm 10 mm 25 mm 50 mm 10 mm 30 mm 60 mm 10 mm 30 mm 60 mm
40 pc 40 pc 40 pc 20 pc 20 pc 20 pc 20 pc 20 pc 10 pc 10 pc 10 pc 10 pc 6 pc 6 pc 6 pc 4 pc 4 pc 4 pc
00371774 00371775 00371776 00371777 00371778 00371779 00371780 00371781 00371782 00371783 00371784 00371785 00371786 00371787 00371788 00371789 00371790 00371791
Dynamic set M10 Dynamic set M12 Dynamic set M16 Dynamic set M20
251
08
Anchor Systems
www.hilti.com
www.hilti.com
08 Anchor Systems
252
Anchor Systems
Anchor Systems
Galvanized min. 5m
Order designation
Self-undercutting anchor with external thread for use anywhere in the compression or tension zone (galvanised version).
Heavy-duty anchor HSL-3-G M8/5 Heavy-duty anchor HSL-3-G M8/20 Heavy-duty anchor HSL-3-G M8/40 Heavy-duty anchor HSL-3-G M8/100 Heavy-duty anchor HSL-3-G M10/5 Heavy-duty anchor HSL-3-G M10/20 Heavy-duty anchor HSL-3-G M10/40 Heavy-duty anchor HSL-3-G M10/100 Heavy-duty anchor HSL-3-G M12/5 Heavy-duty anchor HSL-3-G M12/25 Heavy-duty anchor HSL-3-G M12/50 Heavy-duty anchor HSL-3-G M12/100 Heavy-duty anchor HSL-3-G M16/10 Heavy-duty anchor HSL-3-G M16/25 Heavy-duty anchor HSL-3-G M16/50 Heavy-duty anchor HSL-3-G M16/100 Heavy-duty anchor HSL-3-G M20/10 Heavy-duty anchor HSL-3-G M20/30 Heavy-duty anchor HSL-3-G M20/60 Heavy-duty anchor HSL-3-G M20/100 * * * * *
12 mm 12 mm 12 mm 12 mm 15 mm 15 mm 15 mm 15 mm 18 mm 18 mm 18 mm 18 mm 24 mm 24 mm 24 mm 24 mm 28 mm 28 mm 28 mm 28 mm
80 mm 80 mm 80 mm 80 mm 90 mm 90 mm 90 mm 90 mm 105 mm 105 mm 105 mm 105 mm 125 mm 125 mm 125 mm 125 mm 155 mm 155 mm 155 mm 155 mm
87 mm 102 mm 122 mm 182 mm 100 mm 115 mm 135 mm 195 mm 119 mm 139 mm 164 mm 214 mm 148 mm 163 mm 188 mm 238 mm 170 mm 190 mm 220 mm 260 mm
5mm 20mm 40mm 100mm 5mm 20mm 40mm 100mm 5mm 25mm 50mm 100mm 10mm 25mm 50mm 100mm 10mm 30mm 60mm 100mm
40 pc 40 pc 40 pc 20 pc 20 pc 20 pc 20 pc 20 pc 20 pc 20 pc 10 pc 10 pc 10 pc 10 pc 10 pc 10 pc 6 pc 6 pc 6 pc 6 pc
00371792 00371793 00371794 00371829 00371795 00371796 00371797 00371830 00371798 00371799 00371800 00371831 00371801 00371802 00371803 00371832 00371804 00371805 00371806 00371833
nn Medium duty fastening in cracked or non-cracked concrete, especially when shallow embedment and/ or small edge distance and spacing is required nn Automatic undercutting by anchor when anchor sleeve is driven onto stud taper which allows quick and easy installation which saves time and money nn Anchor hole very precise due to stepped drill bits ensures correct installation criteria and safety
Fields of Application
nn Fastening where safety is at stake e.g. to secure cladding and facades, installation and ceiling with low embedment depth and small edge and spacing distance
nn Parking space barriers, seat attachment, balcony safety railings, hand rail, air ducts, fire escape, medium duty facade attachment
Base Material
8
Item Number
Safety anchor HSC-A M8x40/15 Safety anchor HSC-A M8x50/15 Safety anchor HSC-A M10x40/20 Safety anchor HSC-A M12x60/20
14 mm 14 mm 16 mm 18 mm
46 mm 56 mm 46.5 mm 68 mm
15 mm 15 mm 20 mm 20 mm
25 pc 25 pc 25 pc 20 pc
Heavy-duty anchor HSLGR M8/20 Heavy-duty anchor HSLGR M10/20 Heavy-duty anchor HSLGR M12/25 Heavy-duty anchor HSLGR M16/25 Heavy-duty anchor HSLGR M20/30
12 mm 15 mm 18 mm 24 mm 28 mm
40 pc 20 pc 20 pc 10 pc 6 pc
Galvanized min. 5m
Safety anchor HSC-AR M8x40/15 Safety anchor HSC-AR M8x50/15 Safety anchor HSC-AR M10x40/20 Safety anchor HSC-AR M12x60/20
14 mm 14 mm 16 mm 18 mm
46 mm 56 mm 46.5 mm 68 mm
15 mm 15 mm 20 mm 20 mm
25 pc 25 pc 25 pc 20 pc
Heavy-duty anchor HSL-3-SK M8/10 Heavy-duty anchor HSL-3-SK M8/20 Heavy-duty anchor HSL-3-SK M10/20 Heavy-duty anchor HSL-3-SK M12/25
12 mm 12 mm 15 mm 18 mm
80 mm 80 mm 90 mm 105 mm
80 mm 90 mm 102 mm 120 mm
40 pc 40 pc 20 pc 20 pc
253
08
Anchor Systems
www.hilti.com
08 Anchor Systems
254
Anchor Systems
Anchor Systems
Safety anchor HSC-I M6x40 Safety anchor HSC-I M8x40 Safety anchor HSC-I M10x50 Safety anchor HSC-I M10x60 Safety anchor HSC-I M12x60
14 mm 16 mm 18 mm 18 mm 20 mm
46 mm 46.6 mm 56 mm 68 mm 68.5 mm
6 mm - 16 mm 8 mm - 22 mm 10 mm - 28 mm 10 mm - 28 mm 12 mm - 30 mm
25 pc 25 pc 25 pc 25 pc 25 pc
TE-C-HSC-MW 14 31169
HSC-A M10 40/20 31140 HSC-AR M10 40/20 31149 TE-C-HSC-MW 16 HSC-I M8 40 31143 HSC-IR M8 40 31152 EW 16 (*) 11267 TE-C-HSC-B 16/40 28568
TE 40
Safety anchor HSC-IR M6x40 Safety anchor HSC-IR M8x40 Safety anchor HSC-IR M10x50 Safety anchor HSC-IR M10x60 Safety anchor HSC-IR M12x60
14 mm 16 mm 18 mm 18 mm 20 mm
46 mm 46.6 mm 56 mm 68 mm 68.5 mm
6 mm - 16 mm 8 mm - 22 mm 10 mm - 28 mm 10 mm - 28 mm 12 mm - 30 mm
25 pc 25 pc 25 pc 25 pc 25 pc
00031151 00031152 00031153 00031154 00031155 HSC-A M12 60/20 15507 HSC-AR M12 60/20 15506
71352
TE-C-HSC-B 18/60
30709
Ordering
Order Description Diameter For use with Package quantity Item Number
Setting tool TE-C-HSC-MW14 Setting tool TE-C-HSC-MW16 Setting tool TE-C HSC-MW18 Setting tool TE-C-HSC-MW20
14 mm 16 mm 18 mm 20 mm
Internal threaded HSC-I(IR) M6, External threaded HSC-A(AR) M8 Internal threaded HSC-I(IR) M8, External threaded HSC-A(AR) M10 External threaded HSC-A(AR) M12, Internal threaded HSC-I(IR) M10 Internal threaded HSC-I(IR) M12
1 pc 1 pc 1 pc 1 pc
00031169 00011267 00071352 00071353 HSC-I M10/50 31144 HSC-IR M10/50 31153 EW 18 (*) TE-C-HSC-MW 18 71352 TE-C-HSC-B 18/50 30708 TE 40
EW 20 (*)
TE-C-HSC-MW 20
71353
TE-C-HSC-B 20/60
30710
Stop drill bit TE-C HSC-B 14/40 Stop drill bit TE-C HSC-B 14/50 Stop drill bit TE-C HSC-B 16/40 Stop drill bit TE-C HSC-B 18/50 Stop drill bit TE-C HSC-B 18/60 Stop drill bit TE-C HSC-B 20/60
14 mm 14 mm 16 mm 18 mm 18 mm 20 mm
HSC-A(R) M8x40/15, HSC-I(R) M6x40 HSC-A(R) M8x50/15 HSC-A(R) M10x40/20, HSC-I(R) M8x40 HSC-I(R) M10x50 HSC-I(R) M10x60, HSC-A(R) M12x60/20 HSC-i(R) M12x60
1 pc 1 pc 1 pc 1 pc 1 pc 1 pc
255
08
Anchor Systems
256
Anchor Systems
Anchor Systems
High performance expansion anchor with unique wedge design for use in cracked and non-cracked concrete (galvanized version).
Order designation
Hole depth
Anchor length
Item Number
Safety stud anchor HST M20X200/60 Safety stud anchor HST M20x260/120 Safety stud anchor HST M24X200/30 Safety stud anchor HST M24X230/60
20 mm 20 mm 24 mm 24 mm
60 mm 120 mm 30 mm 60 mm
5 pc 5 pc 5 pc 5 pc
nn The optimised design of expansion cone and wedge, combined with special steel and coatings, ensure outstanding performance in cracked and non-cracked concrete. nn Excellent permitted edge and spacing distances nn Comprehensive product offering includes a large variety of sizes (from M8 to M24) and materials (carbon steel zinc plated, A4/ 316 stainless steel, and HCR 1.4529 - high corrosion resistant) for a variety of applications nn Mechanical expansion allows immediate load application and can be installed through the fixture, improving productivity
Fields of Application
Order designation
nn Attaching structural steel, faade, hand rails, racks, mechanical equipment, pipe supports, elevators etc. to cracked and noncracked concrete. Particularly suited for safety relevant application.
Hole depth
Anchor length
Item Number
Safety stud anchor HST-R M8X75/10 Safety stud anchor HST-R M8X95/30 Safety stud anchor HST-R M8X115/50 Safety stud anchor HST-R M10X90/10 Safety stud anchor HST-R M10X110/30 Safety stud anchor HST-R M10X130/50 Safety stud anchor HST-R M10X160/80 Safety stud anchor HST-R M12X115/20 Safety stud anchor HST-R M12X145/50 Safety stud anchor HST-R M12X185/90 Safety stud anchor HST-R M12X215/120 Safety stud anchor HST-R M16X140/25 Safety stud anchor HST-R M16X165/50 Safety stud anchor HST-R M16X215/100 Safety stud anchor HST-R M16X255/140 Safety stud anchor HST-R M16X295/180 Safety stud anchor HST-R M20X170/30 Safety stud anchor HST-R M20X200/60
8 mm 8 mm 8 mm 10 mm 10 mm 10 mm 10 mm 12 mm 12 mm 12 mm 12 mm 16 mm 16 mm 16 mm 16 mm 16 mm 20 mm 20 mm 24 mm 24 mm
75 mm 95 mm 115 mm 90 mm 110 mm 130 mm 160 mm 115 mm 145 mm 185 mm 215 mm 140 mm 165 mm 215 mm 255 mm 295 mm 170 mm 200 mm 200 mm 230 mm
50 pc 50 pc 50 pc 50 pc 50 pc 25 pc 25 pc 25 pc 25 pc 25 pc 25 pc 12 pc 12 pc 12 pc 12 pc 12 pc 5 pc 5 pc 5 pc 5 pc
00376039 00376041 00376042 00376043 00376044 00376045 00376046 00376047 00376048 00376049 00376050 00376051 00376052 00376053 00376054 00376055 00376056 00376057 00376058 00376059
nn Through fastener for wood angles channels and columns in concrete and hard stone
Base Material
Safety stud anchor HST M8X75/10 Safety stud anchor HST M8x95/30 Safety stud anchor HST M8X115/50 Safety stud anchor HST M10X90/10 Safety stud anchor HST M10x110/30 Safety stud anchor HST M10X130/50 Safety stud anchor HST M12X115/20 Safety stud anchor HST M12X145/50 Safety stud anchor HST M12X185/90 Safety stud anchor HST M12X215/120 Safety stud anchor HST M12X235/140 Safety stud anchor HST M12X255/160 Safety stud anchor HST M16X140/25 Safety stud anchor HST M16X165/50 Safety stud anchor HST M16X215/100 Safety stud anchor HST M16X255/140 Safety stud anchor HST M16X295/180 Safety stud anchor HST M20X170/30
8 mm 8 mm 8 mm 10 mm 10 mm 10 mm 12 mm 12 mm 12 mm 12 mm 12 mm 12 mm 16 mm 16 mm 16 mm 16 mm 16 mm 20 mm
75 mm 95 mm 115 mm 90 mm 110 mm 130 mm 115 mm 145 mm 185 mm 215 mm 235 mm 255 mm 140 mm 165 mm 215 mm 255 mm 295 mm 170 mm
100 pc 100 pc 50 pc 50 pc 50 pc 50 pc 25 pc 25 pc 25 pc 25 pc 25 pc 25 pc 12 pc 12 pc 12 pc 12 pc 5 pc 5 pc
00371581 00295378 00371583 00371584 00295367 00371586 00371587 00371588 00384582 00371590 00371591 00371592 00371593 00371594 00371595 00371596 00371597 00371598
www.hilti.com www.hilti.com 08 Anchor Systems
257
08
Anchor Systems
258
Anchor Systems
Anchor Systems
Expansion anchor with unique wedge design assembled with nut and washer (galvanized version).
Order designation
Hole depth
Anchor length
Item Number
Std stud anchor HSA M10X160/90/97 Std stud anchor HSA M10X180/110/117 Std stud anchor HSA M12X80/-/5 Std stud anchor HSA M12X100/5/25 Std stud anchor HSA M12X120/25/45 Std stud anchor HSA M12X150/55/75 Std stud anchor HSA M12X180/85/105 Std stud anchor HSA M12X220/125/145 Std stud anchor HSA M12X240/145/165 Std stud anchor HSA M12X300/205/225 Std stud anchor HSA M16X100/-/5
10 mm 10 mm 12 mm 12 mm 12 mm 12 mm 12 mm 12 mm 12 mm 12 mm 16 mm 16 mm 16 mm 16 mm 16 mm 20 mm 20 mm
160 mm 180 mm 80 mm 100 mm 120 mm 150 mm 180 mm 220 mm 240 mm 300 mm 100 mm 120 mm 140 mm 190 mm 240 mm 125 mm 170 mm
50 pc 50 pc 25 pc 25 pc 25 pc 25 pc 25 pc 25 pc 25 pc 50 pc 16 pc 16 pc 16 pc 16 pc 16 pc 10 pc 10 pc
00384614 00384615 00255844 00255845 00255846 00255847 00255848 00255849 00255850 00255851 00255852 00255853 00255854 00255855 00255856 00255857 00255858
nn Comprehensive product offering includes a large range of sizes (from M6 to M20), lengths, and materials (zinc plated carbon steel, hot dipped galvanized and A4/316 stainless steel) for a variety nn Two embedment depths marked to ensure that the fastening is done right on site nn Nut and washer pre-assembled for time saving on site
Fields of Application
nn - High racks
Std stud anchor HSA M16X120/5/25 Std stud anchor HSA M16X140/25/45 Std stud anchor HSA M16X190/75/95 Std stud anchor HSA M16X240/125/145 Std stud anchor HSA M20X125/-/10 Std stud anchor HSA M20X170/30/55
nn Attaching structural steel, faade, hand rails, racks, mechanical equipment, pipe supports, elevators etc. to non-cracked concrete nn - Warehouse roof structures nn - Guard rails etc. nn especially when fastening through the fixture is required
nn The letter code on the head refers to the length of the anchor in order to check whether the necessary anchor length has been used
Base Material
nn Concrete (non-cracked)
ead marking H
Std stud anchor HSA-R M6X50/-/5 Std stud anchor HSA-R M6X65/10/Std stud anchor HSA-R M6X85/30/Std stud anchor HSA-R M8X57/-/5 Std stud anchor HSA-R M8X75/10/23 Std stud anchor HSA-R M8x92/27/40 Std stud anchor HSA-R M8X115/50/63 Std stud anchor HSA-R M10X68/-/5
6 mm 6 mm 6 mm 8 mm 8 mm 8 mm 8 mm 10 mm 10 mm 10 mm 12 mm 12 mm 12 mm 16 mm 16 mm 16 mm 20 mm 20 mm
5 mm 10 mm 30 mm 5 mm 23 mm 40 mm 63 mm 5 mm 25 mm 57 mm 5 mm 25 mm 45 mm 5 mm 45 mm 95 mm 10 mm 55 mm
00332183 00332184 00332185 00332186 00332187 00295370 00332189 00332190 00332191 00295355 00332193 00332194 00332195 00337116 00337117 00337118 00337119 00337120
Ordering Material: Carbon steel Order designation Std stud anchor HSA M6X50/-/5 Std stud anchor HSA M6X65/10/20 Std stud anchor HSA M6X85/30/40 Std stud anchor HSA M6X100/45/55 Std stud anchor HSA M8X57/-/5 Std stud anchor HSA M8X75/10/23 Std stud anchor HSA M8x92/27/40 Std stud anchor HSA M8X115/50/63 Std stud anchor HSA M8X137/72/85 Std stud anchor HSA M10X68/-/5 Std stud anchor HSA M10X90/20/25 Std stud anchor HSA M10x108/37/45 Std stud anchor HSA M10x120/50/57 Std stud anchor HSA M10X140/70/77
Hole depth
Anchor length
Item Number
Std stud anchor HSA-R M10X90/20/25 Std stud anchor HSA-R M10x120/50/57 Std stud anchor HSA-R M12X80/-/5 Std stud anchor HSA-R M12X100/5/25 Std stud anchor HSA-R M12X120/25/45 Std stud anchor HSA-R M16X100/-/5 Std stud anchor HSA-R M16X140/25/45 Std stud anchor HSA-R M16X190/75/95 Std stud anchor HSA-R M20X125/-/10 Std stud anchor HSA-R M20X170/30/55
6 mm 6 mm 6 mm 6 mm 8 mm 8 mm 8 mm 8 mm 8 mm 10 mm 10 mm 10 mm 10 mm 10 mm
55 mm 55 mm 55 mm 55 mm 65 mm 65 mm 65 mm 65 mm 65 mm 70 mm 70 mm 70 mm 70 mm 70 mm
5 mm 20 mm 40 mm 55 mm 5 mm 23 mm 40 mm 63 mm 85 mm 5 mm 25 mm 45 mm 57 mm 77 mm
00255830 00255831 00255832 00255833 00255834 00255835 00295377 00255837 00255838 00255839 00255840 00295350 00295352 00255843
259
08
Anchor Systems
www.hilti.com
www.hilti.com
08 Anchor Systems
260
Anchor Systems
Anchor Systems
Std stud anchor HSA-F M6X50/-/5 Std stud anchor HSA-F M6X65/10/20 Std stud anchor HSA-F M8X57/-/5 Std stud anchor HSA-F M8X75/10/23 Std stud anchor HSA-F M8x92/27/40 Std stud anchor HSA-F M8X137/72/85 Std stud anchor HSA-F M10X68/-/5 Std stud anchor HSA-F M10X90/20/25 Std stud anchor HSA-F M10x108/37/45 Std stud anchor HSA-F M10X120/50/57 Std stud anchor HSA-F M12X80/-/5 Std stud anchor HSA-F M12X100/5/25 Std stud anchor HSA-F M12X120/25/45 Std stud anchor HSA-F M12X150/55/75 Std stud anchor HSA-F M12X240/145/165 Std stud anchor HSA-F M16X100/-/5 Std stud anchor HSA-F M16X140/25/45 Std stud anchor HSA-F M16X190/75/95 Std stud anchor HSA-F M20x125/-/10 Std stud anchor HSA-F M20X170/30/55
6 mm 6 mm 8 mm 8 mm 8 mm 8 mm 10 mm 10 mm 10 mm 10 mm 12 mm 12 mm 12 mm 12 mm 12 mm 16 mm 16 mm 16 mm 20 mm 20 mm
50 mm 65 mm 57 mm 75 mm 92 mm 137 mm 68 mm 90 mm 108 mm 120 mm 80 mm 100 mm 120 mm 150 mm 240 mm 100 mm 140 mm 190 mm 125 mm 170 mm
5 mm 20 mm 5 mm 23 mm 40 mm 85 mm 5 mm 25 mm 45 mm 57 mm 5 mm 25 mm 45 mm 75 mm 165 mm 5 mm 45 mm 95 mm 10 mm 55 mm
00338260 00337121 00337122 00337123 00295371 00337125 00337126 00337127 00295353 00337129 00337130 00337131 00337132 00337133 00338261 00337134 00337135 00337136 00274696 00337137
nn Ideal for repetitive fastening applications with threaded rods of the same length - features a collar for accurate setting flush with the surface irrespective of hole depth nn No damage to the thread when tapping in and expanding nn Intelligent stepped expansion piece adapts to suit materials of different hardness nn Visual check for correct setting nn Shallow drilling depth for M6, M8, M10 and M12 (25mm)
Fields of Application
nn Optimum solution for serial fastenings for cable tray, HVAC, pipe suspensions,suspended ceilings nn Ideal for setting into bison precast hollow units
Base material
nn Concrete
Ordering
Order Description Length Package quantity Item Number
Flush anchor HKD M6x25 Flush anchor HKD M8x40 Flush anchor HKD M8x25 Flush anchor HKD M8x30 Flush anchor HKD M10x40 Flush anchor HKD M10x25 Flush anchor HKD M10x30 Flush anchor HKD M12x50 Flush anchor HKD M12x25 Flush anchor HKD M16x65 Flush anchor HKD M20x80
8 mm 10 mm 10 mm 10 mm 12 mm 12 mm 12 mm 15 mm 15 mm 20 mm 25 mm
27 mm 44 mm 27 mm 33 mm 44 mm 27 mm 33 mm 55 mm 27 mm 70 mm 85 mm
25 mm 40 mm 25 mm 30 mm 40 mm 25 mm 30 mm 50 mm 25 mm 65 mm 80 mm
25 mm 40 mm 25 mm 30 mm 40 mm 25 mm 30 mm 50 mm 25 mm 65 mm 80 mm
00376894 00376961 00376957 00376959 00376967 00376963 00376965 00378544 00378431 00382941 00382955
150 mm 300 mm
1 pc 1 pc
00337918 00337919
Std stud anchor HSV M8x75 Std stud anchor HSV M10x90 Std stud anchor HSV M12x100 Std stud anchor HSV M16x140
8 mm 10 mm 12 mm 16 mm
65 mm 70 mm 95 mm 115 mm
75 mm 90 mm 100 mm 140 mm
10 mm 20 mm 10 mm 45 mm
261
08
Anchor Systems
www.hilti.com
www.hilti.com
08 Anchor Systems
262
Anchor Systems
Anchor Systems
Order designation
Item Number
Setting tool HSD-M M6 1/4X25 Setting tool HSD-M M8 5/16X30 Setting tool HSD-M M8 5/16X40 Setting tool HSD-M M10 3/8X30 Setting tool HSD-M M10 3/8X40 Setting tool HSD-M M12 1/2X50 Setting tool HSD-M M16 5/8X65 Setting tool HSD-M M20 3/4X80
1 pc 1 pc 1 pc 1 pc 1 pc 1 pc 1 pc 1 pc
Flush anchor HKD-SR M6X25 Flush anchor HKD-SR M8X30 Flush anchor HKD-SR M10X40 Flush anchor HKD-SR M12X50 Flush anchor HKD-SR M16X65 Flush anchor HKD-SR M20X80
27 mm 33 mm 43 mm 54 mm 70 mm 85 mm
8 mm 10 mm 12 mm 15 mm 20 mm 25 mm
25 mm 30 mm 40 mm 50 mm 65 mm 80 mm
30 mm 40 mm 50 mm 65 mm 80 mm 40 mm
100 pc 100 pc 50 pc 50 pc 25 pc 25 pc
Order designation
Hole depth
Anchor length
Item Number
Order designation
Item Number
Flush anchor HKV M6x25 Flush anchor HKV M8x30 Flush anchor HKV M10x30 Flush anchor HKV M10x40 Flush anchor HKV M12x50 Flush anchor HKV M16x65
27 mm 33 mm 33 mm 44 mm 55 mm 70 mm
8 mm 10 mm 12 mm 12 mm 15 mm 20 mm
25 mm 30 mm 30 mm 40 mm 50 mm 65 mm
25 mm 30 mm 30 mm 40 mm 50 mm 65 mm
100 pc 100 pc 50 pc 50 pc 25 pc 25 pc
Stop drill bit TE-CX-HKD-B 8/27 Stop drill bit TE-CX-HKD-B 10/27 Stop drill bit TE-CX-HKD-B 10/33 Stop drill bit TE-CX-HKD-B 10/44 Stop drill bit TE-CX-HKD-B 12/27 Stop drill bit TE-CX-HKD-B 12/33 Stop drill bit TE-CX-HKD-B 12/44 Stop drill bit TE-CX-HKD-B 15/27 Stop drill bit TE-CX-HKD-B 15/55
1 pc 1 pc 1 pc 1 pc 1 pc 1 pc 1 pc 1 pc 1 pc
Order designation
Item Number
Setting tool HSD-G M6 1/4X25 Setting tool HSD-G M6 1/4X25/30 Setting tool HSD-G M8 5/16X30 Setting tool HSD-G M8 5/16X40 Setting tool HSD-G 3/8X20 Setting tool HSD-G M10 3/8x30 Setting tool HSD-G M10 3/8X40 Setting tool HSD-G M12 1/2X50 Setting tool HSD-G M16 5/8X65 Setting tool HSD-G M20 3/4X80
1 pc 1 pc 1 pc 1 pc 1 pc 1 pc 1 pc 1 pc 1 pc 1 pc
00243738 00257621 00243740 00243741 00247776 00230935 00243742 00243743 00243744 00243745
Order designation Diameter For use with Minimum order quantity Item Number
Setting tool HKD-TE-CX M8x25 Setting tool HKD-TE-CX M8 5/16x30 Setting tool HKD-TE-CX M8x40 Setting tool HKD-TE-CX M10x25 Setting tool HKD-TE-CX M10 3/8x30 Setting tool HKD-TE-CX M10 3/8x40
8 mm 8 mm 8 mm 10 mm 10 mm 10 mm
TE 7-TE30 All TE-C tools All TE-C tools All TE-C tools All TE-C tools All TE-C tools
1 pc 1 pc 1 pc 1 pc 1 pc 1 pc
263
08
Anchor Systems
www.hilti.com
www.hilti.com
08 Anchor Systems
264
Anchor Systems
Anchor Systems
Anchor length
Item Number
Hollow deck anchor HKH M6/10 Hollow deck anchor HKH M8/10 Hollow deck anchor HKH M10/10
10 mm 12 mm 14 mm
55 mm 55 mm 55 mm
10 mm 10 mm 10 mm
100 pc 50 pc 50 pc
nn Variety of lengths and sizes allows for a multitude of applications nn Pre-assembled anchor to ensure easy and fast installation nn Ideal for through fastening applications nn Suitable for different base materials due to expansion principle nn Easily removable ideal for temporary fastenings
Fields of Application
nn Permanent and temporary fastening in the light and medium load range
Base Material
Aerated concrete anchor HPD M6/10 Aerated concrete anchor HPD M6/30 Aerated concrete anchor HPD M8/10 Aerated concrete anchor HPD M8/20 Aerated concrete anchor HPD M10/10 Aerated concrete anchor HPD M10/30
6 mm 6 mm 8 mm 8 mm 10 mm 10 mm
62 mm 62 mm 62 mm 62 mm 62 mm 62 mm
10 mm 30 mm 10 mm 20 mm 10 mm 30 mm
25 pc 25 pc 25 pc 25 pc 25 pc 25 pc
Sleeve anchor HLC 6,5x25/5 Sleeve anchor HLC 6,5x40/20 Sleeve anchor HLC 6,5x60/40 Sleeve anchor HLC 8x40/10 Sleeve anchor HLC 8x55/25 Sleeve anchor HLC 8x70/40 Sleeve anchor HLC 8x85/55 Sleeve anchor HLC 10x40/5 Sleeve anchor HLC 10x50/15 Sleeve anchor HLC 10x60/25 Sleeve anchor HLC 10x80/45 Sleeve anchor HLC 10x100/65 Sleeve anchor HLC 12x55/15 Sleeve anchor HLC 12x75/35 Sleeve anchor HLC 12x100/60 Sleeve anchor HLC 16x60/10 Sleeve anchor HLC 16x100/50 Sleeve anchor HLC 16x140/90 Sleeve anchor HLC 20x80/25 Sleeve anchor HLC 20x115/60 Sleeve anchor HLC 20x150/95
30 mm 30 mm 30 mm 40 mm 40 mm 40 mm 40 mm 50 mm 50 mm 50 mm 50 mm 50 mm 65 mm 65 mm 65 mm 75 mm 75 mm 75 mm 85 mm 85 mm 85 mm
5 mm 20 mm 40 mm 10 mm 25 mm 40 mm 55 mm 5 mm 15 mm 25 mm 45 mm 65 mm 15 mm 35 mm 60 mm 10 mm 50 mm 90 mm 25 mm 60 mm 95 mm
00385811 00385812 00385813 00385814 00385816 00385817 00385818 00385819 00385820 00385822 00385823 00385824 00385825 00385827 00385829 00385830 00385831 00385832 00385833 00385834 00385835
265
08
Anchor Systems
www.hilti.com
www.hilti.com
08 Anchor Systems
266
Anchor Systems
Anchor Systems
Galvanized min. 5m
Sleeve anchor HLC-A 8x36 Sleeve anchor HLC-A 10x35 Sleeve anchor HLC-A 12x48 Sleeve anchor HLC-A 16x100 Sleeve anchor HLC-A 16x160
8 mm 10 mm 12 mm 16 mm 16 mm
40 mm 50 mm 65 mm 75 mm 75 mm
36 mm 35 mm 48 mm 100 mm 160 mm
60 mm 80 mm 100 mm 5 mm 15 mm
100 pc 50 pc 50 pc 10 pc 10 pc
00385878 00385879 00385880 00385881 00385882 Sleeve anchor HLC-SK 6,5x45/20 Sleeve anchor HLC-SK 6,5x65/40 Sleeve anchor HLC-SK 6,5x85/60 Sleeve anchor HLC-SK 8x60/25 Sleeve anchor HLC-SK 8x75/40 Sleeve anchor HLC-SK 8x90/55 Sleeve anchor HLC-SK 10x45/5 Sleeve anchor HLC-SK 10x85/45 Sleeve anchor HLC-SK 10x105/65 Sleeve anchor HLC-SK 10x130/95 Sleeve anchor HLC-SK 12x80/35 * * * * * * * * * * *
30 mm 30 mm 30 mm 40 mm 40 mm 40 mm 50 mm 50 mm 50 mm 50 mm 65 mm
45 mm 65 mm 85 mm 60 mm 75 mm 90 mm 45 mm 85 mm 105 mm 130 mm 80 mm
20 mm 40 mm 60 mm 25 mm 40 mm 55 mm 5 mm 45 mm 65 mm 95 mm 35 mm
00385856 00385857 00385858 00385859 00385860 00385861 00385862 00385863 00385864 00385865 00385866
Sleeve anchor HLC-EC 8x40 Sleeve anchor HLC-EC 10x50 Sleeve anchor HLC-EC 16x100 Sleeve anchor HLC-EC 16x160
* * * *
40 mm 50 mm 75 mm 75 mm
8 mm 10 mm 16 mm 16 mm
50 pc 50 pc 10 pc 15 pc
8
Material: Galvanized steel
Order designation Drill bit diameter Hole depth Anchor length Minimum order quantity Item Number
6.5 mm
30 mm
25 mm
50 pc
00385877
8 mm
40 mm
40 mm
50 pc
00385875
267
08
Anchor Systems
www.hilti.com
www.hilti.com
08 Anchor Systems
268
Anchor Systems
Anchor Systems
Anchor length
Item Number
Screw anchor HUS-HF 10x65/-/5 Screw anchor HUS-HF 10x75/5/15 Screw anchor HUS-HF 10x90/20/30 Screw anchor HUS-HF 10x100/30/40 Screw anchor HUS-HF 10x120/50/60 Screw anchor HUS-HF 14x80/-/-/10 Screw anchor HUS-HF 14x115/5/25/45
10 mm 10 mm 10 mm 10 mm 10 mm 14 mm 14 mm
12 mm 25 mm 9 mm 12 mm 24 mm 40 mm 12 mm
50 pc 50 pc 50 pc 50 pc 50 pc 16 pc 16 pc
Fields of Application
nn Formwork nn Removable fastenings
nn Higher productivity - less drilling and fewer operations than with conventional anchors nn Hexagonal head with integral washer for neat appearance when fastening through in-place parts nn ETA approval, also for cracked concrete
Base Material
nn Concrete, Brick (solid clay), Mz12/2,0, Brick (solid sand-lime), KS 12/2,0, Concrete (aereated PPW 6-0,4)
Material: A4 316
Order designation Special Item Drill bit diameter Hole depth Anchor length Thickness fastened - max Package quantity Item Number
Screw anchor HUS-HR 8x65/5/15 Screw anchor HUS-HR 8x105/25/45/55 Screw anchor HUS-HR 10x75/5/15 Screw anchor HUS-HR 10x115/25/45/55 Screw anchor HUS-HR 14x120/10/50
* * * * *
8 mm 8 mm 10 mm 10 mm 14 mm
15 mm 55 mm 15 mm 55 mm 50 mm
25 pc 20 pc 25 pc 25 pc 12 pc
8
8 mm 8 mm 8 mm 8 mm 8 mm 8 mm 10 mm 10 mm 10 mm 10 mm 10 mm 10 mm 10 mm 10 mm 10 mm 10 mm 14 mm 14 mm 14 mm 14 mm 55 mm 65 mm 90 mm 110 mm 130 mm 150 mm 65 mm 75 mm 90 mm 100 mm 120 mm 140 mm 160 mm 200 mm 240 mm 280 mm 80 mm 115 mm 135 mm 160 mm 30 mm 150 mm 190 mm 50 mm 70 mm 90 mm 110 mm 130 mm 30 mm 50 mm 170 mm 190 mm 70 mm 90 mm 110 mm 130 mm 150 mm 32 mm 32 mm 8 mm 50 pc 50 pc 50 pc 50 pc 50 pc 50 pc 50 pc 50 pc 50 pc 50 pc 50 pc 50 pc 50 pc 25 pc 25 pc 25 pc 16 pc 16 pc 16 pc 16 pc 00368728 00368729 00368731 00368732 00368733 00368734 00368735 00368736 00401439 00368738 00368739 00368740 00368741 00368742 00368743 00368744 00368745 00368746 00368747 00368748 Note: h1 = Nominal Embedment Depth Is = Nominal length of screw tfix = Maximum fastening thickness
08 Anchor Systems
Screw anchor HUS-H 8x55/-/5 Screw anchor HUS-H 8x65/5/15 Screw anchor HUS-H 8x90/15/30/40 Screw anchor HUS-H 8x110/35/50/60 Screw anchor HUS-H 8x130/55/70/80 Screw anchor HUS-H 8x150/75/90/100 Screw anchor HUS-H 10x65/-/5 Screw anchor HUS-H 10x75/5/15 Screw anchor HUS-H 10x90/5/20/30 Screw anchor HUS-H 10x100/15/30/40 Screw anchor HUS-H 10x120/35/50/60 Screw anchor HUS-H 10x140/55/70/80 Screw anchor HUS-H 10x160/75/90/100 Screw anchor HUS-H 10x200/115/130/140 Screw anchor HUS-H 10x240/155/170/180 Screw anchor HUS-H 10x280/195/210/220 Screw anchor HUS-H 14x80/-/-/10 Screw anchor HUS-H 14x115/5/25/45 Screw anchor HUS-H 14x135/25/45/65 Screw anchor HUS-H 14x160/50/70/90
269
08
Anchor Systems
www.hilti.com
www.hilti.com
270
Anchor Systems
Anchor Systems
The light duty screw anchor system for fastening directly into concrete.
nn Directly driven into base material nn No additional steps required nn Big productivity gains and labour savings nn Reduced edge distance and spacing
Fields of Application
nn Fastening door frames, window frames, strips, wood battens etc nn Installing temporary forming boards nn Fastening air-conditioning ducts
Fields of Application
nn Significant time saving over the total installation compared with traditional anchor types nn Less drilling and convenient overhead installation nn Lower inventory thanks to M8 / M10 dual connection boss - one product for 2 diameters nn Efficient cutting edges for a powerful hold in concrete
nn Various pipe and ventilation duct fastening applications nn Suspension of single or multiple pipes nn Ideal for repetitive fastening jobs
Base Material
Base material
nn Concrete
nn Concrete block (solid), Concrete (gas), Concrete (cracked), Brick (solid), Brick (hollow)
Hollow brick
mm min. 0 mm mm
Solid brick
min. 0 mm mm mm
Concrete
min. 0 mm
min. 40 mm
min. 0 mm
Order designation
??? ???
??? ???
???
min. 40 mm mm
mm
Hole depth
Anchor length
Item Number
Screw anchor HUS-I 6x35 M8/M10 Ordering Material: carbon steel, zinc plated to 5 microns
Order designation
6 mm
h1=(Is-tfix)+3 mm
35 mm
100 pc
00416740
Special Item
Anchor length
Item Number
Screw anchor HUS 6x35 Screw anchor HUS 6x45 Screw anchor HUS 6x60 Screw anchor HUS 6x80 Screw anchor HUS 6x100 Screw anchor HUS 6x120 Screw anchor HUS 6x140 Screw anchor HUS 6x160 Screw anchor HUS 6x180 Screw anchor HUS 6x200 Screw anchor HUS 6x220
* * * *
6 mm 6 mm 6 mm 6 mm 6 mm 6 mm 6 mm 6 mm 6 mm 6 mm 6 mm
100 pc 100 pc 100 pc 100 pc 100 pc 100 pc 100 pc 100 pc 100 pc 100 pc 100 pc
00383047 00383048 00383049 00381401 00381402 00381403 00381404 00381405 00383050 00383051 00383052
???
Note:
h1 = Nominal Embedment Depth Is = Nominal length of screw tfix = Maximum fastening thickness
08 Anchor Systems
271
08
Anchor Systems
www.hilti.com
www.hilti.com
272
Anchor Systems
Anchor Systems
Screw anchor HUS-A 6x45 - M 8/18 Screw anchor HUS-A 6x65 - M 8/18 Screw anchor HUS-A 6x45 - M10/21 Screw anchor HUS-A 6x65 - M10/21 Screw anchor HUS-A 6x65-M10/21
* * * * *
6 mm 6 mm 6 mm 6 mm 6 mm
45 mm 65 mm 45 mm 65 mm 65 mm
Fields of Application
nn Significant time saving over the total installation compared with traditional anchor types nn Less drilling and convenient overhead installation nn Flat head configuration allows easy repositioning of connectors in installation channels
nn Piping or ventilation ducts on channels fastened directly to ceilings nn Installation of items such as hand rails or railings where good appearance is important nn Ideal for repetitive fastening jobs
Base material
nn Concrete
Accessories
HUS Universal HUS-HF
HUS-H
HUS-A
Order Description Bit holder S-BH 1/2 1/4 n Ordering Material: Carbon steel
Order designation Drill bit diameter Hole depth Anchor length Minimum order quantity Item Number
HUS-S
Bit holder S-BH 75 1/2 1/4 Extension tube S-V 125 1/2 1/2 Ring 21 set Ring 26 set n n n n n n
6 mm
h1 = ls - tfix) + 3 mm
40 mm
100 pc
00416745
Note:
h1 = Nominal Embedment Depth Is = Nominal length of screw tfix = Maximum fastening thickness
08 Anchor Systems www.hilti.com | 0800-123 123456 07 Anchor Systems www.hilti.com 273 www.hilti.com 08 Anchor Systems
273
274
Anchor Systems
Anchor Systems
Fields of Application
Technical Data
SI 100 Rated voltage Rated input Max. torque No load speed Weight according EPTA-Procedure 01/2003 Chuck type 110 V 470 W 100 Nm 0-2200 rpm 2.3 kg 1/2 in square with retention pin
nn For miscellaneous fastening in industrial and manufacturing facilities and for large scale repetitive fastenings including: shelving/ rack systems, hand rails, railings, indoor stadium seatings, etc.
Fields of Application
Technical Data
TKI 2500 Rated voltage Rated input Max. torque No load speed Weight according EPTA-Procedure 01/2003 Chuck type 230 V 600 W 45 Nm 0-2500 rpm 1.9 kg 1/4 in hexagon socket with ballnotch retention
nn Driving the 6 mm HUS screw in concrete, brick and gas concrete nn Driving 8 mm diameter woodscrews nn Driving 8 mm diameter screws into metal and plastic anchors
nn 100 Nm Torque impact screwdriver when used in conjunction with Hilti HUS screw anchors provides a fully integrated system, which saves time on installation
nn A tangential rotary impact action, thus the high torque (reaction force) is hardly felt at the operators hand nn Depth gauge allows electronic cut-out
8
Y LIFETIME SERVICE L REPAIR COST LIMIT NO COSTS L
MANUFACTURERS
WARRANTY
Ordering
Order Description Impact screwdriver SI 100 110V GB cas Impact screwdriver SI 100 230V Package content SI 100, 110V, Hilti case, GB plug. SI 100, 230V, Hilti case, EU plug. Item Number 00334202 00334204
Ordering
Order Description Impact screwdriver TKI 2500 230V cas Package content TKI 2500, 230V, Supplied in a plastic case with S-BH 50m bit holder, S-B TXI 40 torx bit and operating instructions. Item Number 00235067
275
08
Anchor Systems
www.hilti.com
www.hilti.com
08 Anchor Systems
276
Anchor Systems
Anchor Systems
Fast and easy anchor for installations on gypsum wallboard or hollow brick.
Fields of Application
nn Securing support frames, timber frames for light stand-off cladding, facade panels, curtain wall nn Fastening window and door frames
Base Material
ls
ls
1
d0 d0
tfix
tfix
3
Ordering
Order designation Drill bit diameter Hole depth Anchor length
Ordering Material: Screw: Carbon Steel 4.8, zink plated 5 microns, Anchor Sleeve: Steel DIN 17162, zinc plated 20
Order designation Special Item Hole depth Drill bit diameter Anchor length Thickness fastened - max Minimum order quantity Item Number
Item Number
Cavity anchor HHD-S M4/4X20 Cavity anchor HHD-S M4/6X32 Cavity anchor HHD-S M4/12X38 Cavity anchor HHD-S M4/19X45 Cavity anchor HHD-S M5/8X38 Cavity anchor HHD-S M5/12X52 Cavity anchor HHD-S M5/25X65 Cavity anchor HHD-S M6/9X38 Cavity anchor HHD-S M6/12X52 Cavity anchor HHD-S M6/24X65 Cavity anchor HHD-S M6/40X80 Cavity anchor HHD-S M8/12X54 Cavity anchor HHD-S M8/24X66 Cavity anchor HHD-S M8/40X83
8 mm 8 mm 8 mm 8 mm 10 mm 10 mm 10 mm 12 mm 12 mm 12 mm 12 mm 12 mm 12 mm 12 mm
4 mm 32 mm 38 mm 45 mm 38 mm 52 mm 65 mm 38 mm 52 mm 65 mm 80 mm 54 mm 24 mm 83 mm
20 mm 32 mm 38 mm 45 mm 38 mm 52 mm 65 mm 38 mm 52 mm 65 mm 80 mm 54 mm 66 mm 83 mm
4 mm 6 mm 12 mm 19 mm 8 mm 12 mm 25 mm 9 mm 12 mm 24 mm 40 mm 12 mm 24 mm 40 mm
00332060 00332061 00332062 00332063 00332065 00332066 00332067 00332069 00332070 00332071 00332072 00332073 00332074 00332075
Metal frame anchor HT 8X72 Metal frame anchor HT 10X72 Metal frame anchor HT 10X92 Metal frame anchor HT 10X112 Metal frame anchor HT 10X132 Metal frame anchor HT 10X152 Metal frame anchor HT 10X182 Metal frame anchor HT 10X202 Metal frame anchor HT 8KX92 Metal frame anchor HT 8KX112 Metal frame anchor HT 8KX132 Metal frame anchor HT 10LX112 Metal frame anchor HT 10LX132 Metal frame anchor HT 10LX152 * * * * * *
40 mm 40 mm 40 mm 40 mm 40 mm 40 mm 40 mm 40 mm 40 mm 40 mm 40 mm 40 mm 40 mm 40 mm
8 mm 10 mm 10 mm 10 mm 10 mm 10 mm 10 mm 10 mm 8 mm 8 mm 8 mm 10 mm 10 mm 10 mm
100 pc 100 pc 100 pc 100 pc 100 pc 100 pc 100 pc 100 pc 100 pc 100 pc 100 pc 100 pc 100 pc 100 pc
00369257 00369263 00369264 00369265 00369266 00369267 00369268 00369269 00369374 00369375 00369376 00369378 00369379 00369380
277
08
Anchor Systems
www.hilti.com
www.hilti.com
08 Anchor Systems
278
Anchor Systems
Anchor Systems
Fields of Application
nn Automatic follow-up expansion, thus safe fastening nn Fastening of lathes (DBZ 6/35) nn Fire resistance
nn Suspensions from concrete ceilings attaching slit-steel straps, punched band, nonius system hanger or wood battens
Fields of Application
nn Roofing installation
Base Material
nn High holding power, thus fewer fastenings, less installation work and lower costs
nn Cladding/ facade installation (metal frames/ structures) nn Metal construction (installing metal parts) nn Fastening door and windows frames
Base Material
nn Concrete (cracked), Concrete (non-cracked), Stone (hard natural), Brick (hollow), Brick (solid), Brick (sand-lime)
Frame anchor HRD-UGS 10X80/10 Frame anchor HRD-UGS 10X80/10 U Frame anchor HRD-UGS 10X100/30 Ordering Material: Cold-formed steel, acc. DIN EN 10263-2
Order designation Drill bit diameter Hole depth Anchor length Thickness fastened - max Minimum order quantity Item Number
10 mm 10 mm 10 mm 10 mm 10 mm 10 mm 10 mm
80 mm 80 mm 80 mm 80 mm 80 mm 80 mm 80 mm
10 mm 10 mm 30 mm 30 mm 50 mm 70 mm
50 pc 25 pc 50 pc 25 pc 50 pc 50 pc 50 pc
Frame anchor HRD-UGS 10X100/30 U Frame anchor HRD-UGS 10X120/50 Frame anchor HRD-UGS 10X140/70 Frame anchor HRD-UGS 10X160/90
6 mm 6 mm
41 mm 41 mm
70.5 mm 40 mm
35 mm 4.5 mm
100 pc 100 pc
00256311 00256312
Ordering
Order designation
1 pc
Frame anchor HRD-UGT 10X80/10 Frame anchor HRD-UGT 10X100/30 Frame anchor HRD-UGT 10X120/50 Frame anchor HRD-UGT 10X140/70 Frame anchor HRD-UGT 10X160/90
10 mm 10 mm 10 mm 10 mm 10 mm
80 mm 80 mm 80 mm 80 mm 80 mm
10 mm 30 mm 50 mm 70 mm 90 mm
50 pc 50 pc 50 pc 50 pc 50 pc
279
08
Anchor Systems
www.hilti.com
www.hilti.com
08 Anchor Systems
280
Anchor Systems
Anchor Systems
The best frame anchor worldwide in it`s short embedment version mainly for solid base material. Hex head, 13 mm.
10 mm 10 mm
80 mm 80 mm
80 mm 120 mm
10 mm 50 mm
50 pc 50 pc
00257289 00257290
Frame anchor HRD-UGS 14X80/10 Frame anchor HRD-UGS 14X110/40 Frame anchor HRD-UGS 14X140/70 Frame anchor HRD-UGS 14X160/90 Frame anchor HRD-UGS 14X180/110
14 mm 14 mm 14 mm 14 mm 14 mm
80 mm 80 mm 80 mm 80 mm 80 mm
10 mm 40 mm 70 mm 90 mm 110 mm
50 pc 50 pc 50 pc 50 pc 50 pc
nn Short embedment frame anchor version for a wide range of base materials, especially solid ones nn Smooth surface for a large contact area with greater friction and higher holding power nn Insertion detent to avoid premature expansion
Fields of Application
nn Mainly fastening of facade-, window- and door-frames and other through fastenings e.g. wood battens, beams, rails nn Securing support frames, timber frames for light stand-off cladding, facade panels, curtain walling nn Fastening window and door frames
Base Material
nn Concrete (cracked), Concrete (non-cracked), Concrete (light), Concrete (aereated), Brick (solid), Brick (hollow)
Frame anchor HRD-SGS 10X60/10 Frame anchor HRD-SGS 10X60/10U Frame anchor HRD-SGS 10X80/30 Frame anchor HRD-SGS 10X80/30 U
Hole depth Drill bit diameter Thickness fastened - max Minimum order quantity Item Number
10 mm 10 mm 10 mm 10 mm 10 mm 10 mm 10 mm 10 mm
60 mm 60 mm 60 mm 60 mm 60 mm 60 mm 60 mm 60 mm
10 mm 10 mm 30 mm 30 mm 50 mm 70 mm 90 mm 110 mm
50 pc 25 pc 50 pc 25 pc 50 pc 50 pc 50 pc 50 pc
Frame anchor HRD-SGS 10X100/50 Frame anchor HRD-SGS 10X120/70 Frame anchor HRD-SGS 10X140/90 Frame anchor HRD-SGS 10X160/110
Frame anchor HRD-UGT 14X80/10 Frame anchor HRD-UGT 14X110/40 Frame anchor HRD-UGT 14X140/70 Frame anchor HRD-UGT 14X160/90 Frame anchor HRD-UGT 14X180/110
80 mm 80 mm 80 mm 80 mm 80 mm
14 mm 14 mm 14 mm 14 mm 14 mm
10 mm 40 mm 70 mm 90 mm 110 mm
1 pc 1 pc 1 pc 1 pc 1 pc
Order designation
Hole depth
Anchor length
Item Number
Frame anchor HRD-SGT 10X60/10 Frame anchor HRD-SGT 10X80/30 Frame anchor HRD-SGT 10X100/50
Drill bit diameter Hole depth Anchor length Thickness fastened - max Minimum order quantity Item Number
10 mm 10 mm 10 mm 10 mm 10 mm 10 mm
60 mm 60 mm 60 mm 60 mm 60 mm 60 mm
10 mm 30 mm 50 mm 70 mm 90 mm 110 mm
50 pc 50 pc 50 pc 50 pc 50 pc 50 pc
Frame anchor HRD-SGT 10X120/70 Frame anchor HRD-SGT 10X140/90 Frame anchor HRD-SGT 10X160/110
Frame anchor HRD-C 8x60 Frame anchor HRD-C 8x80 Frame anchor HRD-C 8x100 Frame anchor HRD-C 8x120 Frame anchor HRD-C 8x140
8 mm 8 mm 8 mm 8 mm 8 mm
60 mm 60 mm 60 mm 60 mm 60 mm
10 mm 30 mm 50 mm 70 mm 90 mm
50 pc 50 pc 50 pc 50 pc 50 pc
281
08
Anchor Systems
www.hilti.com
www.hilti.com
08 Anchor Systems
282
Anchor Systems
Anchor Systems
Frame anchor HRD-SRS 10X60/10 Frame anchor HRD-SRS 10X80/30 Frame anchor HRD-SRS 10X100/50 Frame anchor HRD-SRS 10X140/90
10 mm 10 mm 10 mm 10 mm
60 mm 60 mm 60 mm 60 mm
60 mm 80 mm 100 mm 140 mm
10 mm 30 mm 50 mm 90 mm
50 pc 50 pc 50 pc 50 pc
Fields of Application
nn An anchor for many applications, e.g. for electrical installations, for roof, interior finishing and wall extensions, in building construction, for mechanical installations and fastening wood Material: Stainless steel A4/ Polyamide PA 6
Order designation Drill bit diameter Hole depth Anchor length Thickness fastened - max Minimum order quantity Item Number
nn Wooden laths/ timber battens, drywall studs, framing, metal sections and mouldings, electrical installation components, mechanical installations (plumbing/ pipe fitting), cable trunking, pipe rings, sheeting/ foils
nn Simple removal using a screwdriver equipped with a crossrecess bit nn Reduced hole and setting depths (up to 20 mm less) nn Trouble free setting thanks to high-quality material, even in extremely cold or dry conditions
Base Material
Frame anchor HRD-SRT 10X60/10 Frame anchor HRD-SRT 10X100/50 Frame anchor HRD-SRT 10X140/90
10 mm 10 mm 10 mm
60 mm 60 mm 60 mm
60 mm 100 mm 140 mm
10 mm 50 mm 90 mm
50 pc 50 pc 50 pc
Accessories
HRD-UGT HRD-SGT
8
Item Number
Order Description Cover cap HKF d.brown Cover cap HKF l.brn. Cover cap HKF white Cover cap HKF-HUS-S d.brown Cover cap HKF-HUS-S white Cover cap HKO d.brown Cover cap HKO l.brn. Cover cap HKO white n n n n n n n n n n n n n n n n
Setting operations
00246782 00246781 00246780 00246784 00246783 00246779 00246778 00246777 Ordering Material: Steel galvanized /Polyamide PA 6.6
Order designation Drill bit diameter Hole depth Anchor length Thickness fastened - max Minimum order quantity Item Number
Impact anchor HPS-1 4/0X20 Impact anchor HPS-1 5/0X20 Impact anchor HPS-1 5/10X30 Impact anchor HPS-1 5/15X35 Impact anchor HPS-1 5/15SX35
4 mm 5 mm 5 mm 5 mm 5 mm
25 mm 25 mm 30 mm 30 mm 30 mm
22 mm 22 mm 27 mm 35 mm 37 mm
2 mm 2 mm 10 mm 15 mm 15 mm
283
08
Anchor Systems
www.hilti.com
www.hilti.com
08 Anchor Systems
284
Anchor Systems
Anchor Systems
Order designation
Hole depth
Anchor length
Item Number
Impact anchor HPS-1 5/30SX50 Impact anchor HPS-1 5/50SX70 Impact anchor HPS-1 5/5X25 Impact anchor HPS-1 6/0X25 Impact anchor HPS-1 6/5X30 Impact anchor HPS-1 6/10X35 Impact anchor HPS-1 6/15-M6/5X40 Impact anchor HPS-1 6/15X40 Impact anchor HPS-1 6/25X50 Impact anchor HPS-1 6/30X55 Impact anchor HPS-1 6/40X65 Impact anchor HPS-1 8/0X25 Impact anchor HPS-1 8/10X40 Impact anchor HPS-1 8/20X50 Impact anchor HPS-1 8/30X60 Impact anchor HPS-1 8/30X60 Impact anchor HPS-1 8/40X70 Impact anchor HPS-1 8/60X90 Impact anchor HPS-1 8/80X110 Impact anchor HPS-1 8/100X130
5 mm 5 mm 5 mm 6 mm 6 mm 6 mm 6 mm 6 mm 6 mm 6 mm 6 mm 8 mm 8 mm 8 mm 8 mm 8 mm 8 mm 8 mm 8 mm 8 mm
30 mm 30 mm 35 mm 40 mm 40 mm 40 mm 40 mm 40 mm 40 mm 40 mm 40 mm 50 mm 50 mm 50 mm 50 mm 50 mm 50 mm 50 mm 50 mm 50 mm
30 mm 50 mm 5 mm 2 mm 5 mm 10 mm 15 mm 15 mm 25 mm 30 mm 40 mm 2 mm 10 mm 20 mm 30 mm 30 mm 40 mm 60 mm 80 mm 100 mm
150 pc 100 pc 200 pc 150 pc 150 pc 150 pc 150 pc 150 pc 100 pc 100 pc 100 pc 100 pc 100 pc 50 pc 50 pc 50 pc 50 pc 50 pc 50 pc 100 pc
00230529 00230530 00260347 00238159 00260349 00230516 00260371 00260350 00260351 00230517 00260352 00238160 00260353 00230518 00260354 00332166 00230519 00260355 00260356 00260367
nn Flared collar design makes the anchor suitable for pre-installation or installation through fixtures.
Fields of Application
nn Anti-rotation wings prevent the anchor from rotating or falling out during installation nn Four-way expanding head enhances keying effect in hollow base material nn High-grade nylon material contains no halogen and no heavy metals
nn Fastening wood furring strips, junction boxes, cable clips, light switches, light fixtures, brackets, signs, shelves and bathroom fixtures
Base Material
nn Concrete (non-cracked), Concrete (light), Concrete (aereated), Brick (solid), Brick (hollow)
Impact anchor HPS-1 R 5/5X25 Impact anchor HPS-1 R 5/10X30 Impact anchor HPS-1 R 5/15X35 Impact anchor HPS-1 R 6/0X25 Impact anchor HPS-1 R 6/5X30 Impact anchor HPS-1 R 6/10X35 Impact anchor HPS-1 R 6/15X40 Impact anchor HPS-1 R 6/25X50 Impact anchor HPS-1 R 6/30X55 Impact anchor HPS-1 R 6/40X65 Impact anchor HPS-1 R 8/10X40 Impact anchor HPS-1 R 8/30X60 Impact anchor HPS-1 R 8/60X90 Impact anchor HPS-1 R 8/80X110
5 mm 5 mm 5 mm 6 mm 6 mm 6 mm 6 mm 6 mm 6 mm 6 mm 8 mm 8 mm 8 mm 8 mm
30 mm 30 mm 40 mm 40 mm 40 mm 40 mm 40 mm 40 mm 40 mm 40 mm 50 mm 50 mm 50 mm 50 mm
5 mm 10 mm 15 mm 2 mm 5 mm 10 mm 15 mm 25 mm 30 mm 40 mm 10 mm 30 mm 60 mm 80 mm
200 pc 200 pc 200 pc 150 pc 150 pc 150 pc 100 pc 100 pc 100 pc 100 pc 100 pc 50 pc 50 pc 50 pc
00260357 00230524 00260358 00238161 00260359 00230525 00260360 00260361 00230526 00260362 00260363 00260364 00260365 00260366
8
8x40 10x50 12x60 14x70 0.55 0.85 1.4 2.0 3.0 1.25 2.2 3.0 5.6 0.35 0.6 0.8 1.0 1.0 0.44
Anchor size 5x25 6x30 Concrete f cc 30 N/mm2 Tensile N Rec 0.3 Shear V Rec 0.4 0.9 Solid brick f cc 20 N/mm2 Tensile N Rec 0.17 Shear V Rec 0.24 0.3
Universal anchor HUD-1 5 Universal anchor HUD-1 5X25 Universal anchor HUD-1 6 Universal anchor HUD-1 6X30 Universal anchor HUD-1 8 Universal anchor HUD-1 8X40 Universal anchor HUD-1 10 Universal anchor HUD-1 10X50 Universal anchor HUD-1 12X60 Universal anchor HUD-1 14X70
5 mm 5 mm 6 mm 6 mm 8 mm 8 mm 10 mm 10 mm 12 mm 14 mm
25 mm 25 mm 30 mm 30 mm 40 mm 40 mm 50 mm 50 mm 60 mm 70 mm
00338708 00331615 00338709 00331616 00338710 00331617 00338711 00331618 00331619 00331620
285
08
Anchor Systems
www.hilti.com
www.hilti.com
08 Anchor Systems
286
Anchor Systems
Material: Polyamide PA 6
Order designation Drill bit diameter Hole depth Anchor length Minimum order quantity Item Number
Universal anchor HUD-L 6X50 Universal anchor HUD-L 8X60 Universal anchor HUD-L 10X70
6 mm 8 mm 10 mm
70 mm 80 mm 90 mm
50 mm 60 mm 70 mm
Fields of Application
nn Cavity/ perforated brick nn Plasterboard/ gypsum panels (drywall) nn Fastenings to weak materials with cavities, connection with commercially available wood screws
nn Three convenient sizes for use in a variety of hollow base materials drywall block and concrete nn Remains mounted in the wall without screw: For convenient handling, installation and reuse Material: Polyamide PA 6
Order designation Drill bit diameter Anchor length Minimum order quantity Item Number
Base Material
nn Drywall
12 mm 14 mm
75 mm 85 mm
50 pc 50 pc
00045626 00045627
8
Working principle HLD-2 C 0.25 B 0.08 A 0.1 B A / B 0.15 A Size of Anchor HLD-3 0.4 0.08 0.2 0.15 0.05 HLD-4 0.5 0.08 0.15 0.05
Concrete f cc 15 N/mm2 Drywall Panel Fibre reinforced gypsum panel 12.5mm Fibre reinforced gypsum panel 2 x 12.5mm Hollow brick Woodwool panel
10 mm 10 mm 10 mm
50 mm 56 mm 66 mm
28 mm 25 mm 44 mm
287
08
Anchor Systems
www.hilti.com
www.hilti.com
08 Anchor Systems
288
Anchor Systems
Anchor Systems
nn Reliable and simple expansion nn Insensitive against bore dust nn Universal use for most common base materials nn High tech in thermal conductivity nn Hammer setting
Fields of Application
Fields of Application
Base Material
nn Specially structured head helps ensure bonding of plaster applied directly over the anchor nn Suitable for insulation thickness up to 150 mm for enhanced versatility
nn Brick (solid), Brick (hollow), Concrete (cracked), Concrete (noncracked), Concrete (light)
nn Black fibre-reinforced hammer-in plastic insulation fastener for all light applications where black colour is required for aesthetical reasons
Base Material
Setting instructions
Insulation fastener IZ 8x70 Insulation fastener IZ 8x90 Insulation fastener IZ 8x110 Insulation fastener IZ 8x130 Insulation fastener IZ 8x150 Insulation fastener IZ 8x170 Insulation fastener IZ 8x190 Insulation fastener IZ 8x210
8 mm 8 mm 8 mm 8 mm 8 mm 8 mm 8 mm 8 mm
40 - 80 mm 40 - 80 mm 40 - 80 mm 40 - 80 mm 40 - 80 mm 40 - 80 mm 40 - 80 mm 40 - 80 mm
Technical data 0/3 do Nominal drill bit diameter (mm) 8 h1 Min. hole depth (mm) 55 tfix Max. fastenable thickness (mm) 30 I Fastener length (mm) 80
3/6 8 55 60 110
6/9 8 55 90 140
NOTE: These figures are given for single anchors without influence from neighbouring anchors or concrete edges and the conditions above. Please consult Hilti Fastening Technology Manual for specific design requirements.
Insulation mandrel IDP 0/2 Insulation mandrel IDP 2/4 Insulation mandrel IDP 4/6 Insulation mandrel IDP 6/8 Insulation mandrel IDP 8/10 Insulation mandrel IDP 10/12 Insulation mandrel IDP 13/15
8 mm 8 mm 8 mm 8 mm 8 mm 8 mm 8 mm
289
08
Anchor Systems
www.hilti.com
www.hilti.com
08 Anchor Systems
290
Anchor Systems
Anchor Systems
8 mm 8 mm 8 mm
80 mm 110 mm 140 mm
30 mm 60 mm 90 mm
Fields of Application
Plates IDMR-T
nn Fastening insulating materials beneath cladding/ facade panels where non-flammable material is specified
Base Material
Ordering
Order Description Package quantity Item Number
250 pc 250 pc
00065789 00065759
Insulation mandrel IDMS 0/ 3 Insulation mandrel IDMS 3/ 6 Insulation mandrel IDMS 6/ 9 Insulation mandrel IDMS 9/12 Insulation mandrel IDMS 12/15
8 mm 8 mm 8 mm 8 mm 8 mm
55 mm 60 mm 60 mm 60 mm 60 mm
30 mm 60 mm 90 mm 120 mm 150 mm
Drywall anchor HSP Drywall anchor HSP 1/4 Drywall anchor HSP-F7 Drywall anchor HSP-M6 Drywall anchor HSP-S
39 mm 39 mm 39 mm 39 mm 39 mm
Accessories
Order Description Screwdriver bit D-B PH2 HSP/HFP Screwdriver bit D-B SQ HSP-G n n n
HSP
HFP
291
08
Anchor Systems
www.hilti.com
www.hilti.com
08 Anchor Systems
292