Beruflich Dokumente
Kultur Dokumente
1.550.2
Anode
DO-34-A2 Package
Conditions
Min
Typ 0.8
Max 0.9
Unit V V A A mV/C pF
Specified value Specified value Specified value Specified value Specified value Specified value Specified value Refer to the list of the electrical characteristics within part numbers
Zener knee operating resistance Zener operating resistance Reverse current Temperature coefficient of zener voltage *3 Terminal capacitance
Note) 1. Rated input/output frequency: 5 MHz 2. *1 : The VZ value is for the temperature of 25C. In other cases, carry out the temperature compensation. *2 : Guaranteed at 20 ms after power application. *3 : Tj = 25C to 150C
Note) The part number in the parenthesis shows conventional part number.
Publication date: February 2002 SKE00004CED
MAZ4000 Series
I Electrical characteristics within part numbers Ta = 25C
VZ = 2.0 V to 6.8 V (IZ = 5 mA)
Zener voltage Part number VZ (V) IZ = 5 mA Min Nom Max 1.88 2.24 1.88 2.12 2.01 2.24 2.08 2.45 2.08 2.33 2.20 2.45 2.28 2.4 2.7 2.28 2.56 2.4 2.7 2.5 2.7 2.9 2.5 2.75 2.65 2.9 2.8 3.0 3.2 2.83 2.9 2.97 2.93 3.0 3.08 3.02 3.1 3.18 3.1 3.3 3.5 3.12 3.2 3.28 3.22 3.3 3.38 3.32 3.4 3.49 3.4 3.6 3.8 3.41 3.5 3.59 3.51 3.6 3.69 3.61 3.7 3.79 3.7 3.9 4.1 3.71 3.8 3.9 3.8 3.9 4.0 3.9 4.0 4.1 4.0 4.3 4.6 4.03 4.1 4.26 4.17 4.3 4.4 4.31 4.4 4.54 4.4 4.7 5.0 4.45 4.6 4.69 4.59 4.7 4.83 4.74 4.9 4.99 4.8 5.1 5.4 4.87 5.0 5.12 5.0 5.1 5.26 5.14 5.3 5.4 5.3 5.6 6.0 5.3 5.4 5.58 5.48 5.6 5.76 5.66 5.8 5.95 5.8 6.2 6.6 5.85 6.0 6.15 6.05 6.2 6.36 6.24 6.4 6.56 6.4 6.8 7.2 6.44 6.6 6.77 6.64 6.8 6.98 6.85 7.0 7.2 Zener operating resistance
Temperature coefficient of zener voltage Terminal capacitance
Reverse current
Marking symbol
Ct (pF) IR1 (A) IR2 (A) RZ () RZK () SZ (mV/C) R = 0 V) VR VR IZ = 5 mA IZ IZ = 5 mA (V f = 1 MHz (V) Max (V) Max Typ Max (mA) Max Min Typ Max Typ Max 1st.
MAZ4020 MAZ40200L MAZ40200H MAZ4022 MAZ40220L MAZ40220H MAZ4024 MAZ40240L MAZ40240H MAZ4027 MAZ40270L MAZ40270H MAZ4030 MAZ40300L MAZ40300M MAZ40300H MAZ4033 MAZ40330L MAZ40330M MAZ40330H MAZ4036 MAZ40360L MAZ40360M MAZ40360H MAZ4039 MAZ40390L MAZ40390M MAZ40390H MAZ4043 MAZ40430L MAZ40430M MAZ40430H MAZ4047 MAZ40470L MAZ40470M MAZ40470H MAZ4051 MAZ40510L MAZ40510M MAZ40510H MAZ4056 MAZ40560L MAZ40560M MAZ40560H MAZ4062 MAZ40620L MAZ40620M MAZ40620H MAZ4068 MAZ40680L MAZ40680M MAZ40680H
0.5 120
100
375 450
Red
Black Black
0.7 120
100
375 450
Red
Red
Red
120
100
375 450
100
100
1 1000 3.5 2
350 450
Red
Purple Purple
50
85 100
20
83 100
10
81 100
Blue
10
79 100
10
75 100
50 80
40 60
15 40
500
Blue
Blue
Red
Red
Gray
Gray
SKE00004CED
MAZ4000 Series
I Electrical characteristics within part numbers (continued) Ta = 25C
VZ = 7.5 V to 20 V (IZ = 5 mA)
Zener voltage Part number VZ (V) IZ = 5 mA Min Nom Max 7.0 7.5 7.9 7.07 7.3 7.43 7.29 7.5 7.67 7.51 7.7 7.89 7.7 8.2 8.7 7.77 7.9 8.17 8.03 8.2 8.43 8.29 8.5 8.7 8.5 9.1 9.6 8.58 8.8 9.02 8.87 9.1 9.33 9.14 9.4 9.6 9.4 10 10.6 9.44 9.7 9.92 9.75 10 10.25 10.07 10.3 10.59 10.4 11 11.6 10.4 10.7 10.94 10.73 11 11.28 11.05 11.3 11.6 11.4 12 12.7 11.4 11.7 11.96 11.73 12 12.33 12.06 12.3 12.68 12.4 13 14.1 12.4 12.7 12.99 12.73 13 13.4 13.25 13.7 14.08 13.65 14 14.35 13.9 15 15.6 13.9 14.3 14.76 14.6 15 15.35 14.95 15.3 15.6 15.3 16 17.1 15.3 15.7 16.09 15.7 16 16.5 16.26 16.7 17.1 16.9 18 19.1 16.9 17.3 17.76 17.55 18 18.45 18.2 18.7 19.1 18.8 20 21.2 18.85 19.3 19.81 19.50 20 20.5 20.15 20.7 21.19 Zener operating resistance
Temperature coefficient of zener voltage Terminal capacitance Ct (pF) (VR = 0 V) f = 1 MHz
Reverse current
Marking symbol
MAZ4075 MAZ40750L MAZ40750M MAZ40750H MAZ4082 MAZ40820L MAZ40820M MAZ40820H MAZ4091 MAZ40910L MAZ40910M MAZ40910H MAZ4100 MAZ41000L MAZ41000M MAZ41000H MAZ4110 MAZ41100L MAZ41100M MAZ41100H MAZ4120 MAZ41200L MAZ41200M MAZ41200H MAZ4130 MAZ41300L MAZ41300M MAZ41300H MAZ41400M MAZ4150 MAZ41500L MAZ41500M MAZ41500H MAZ4160 MAZ41600L MAZ41600M MAZ41600H MAZ4180 MAZ41800L MAZ41800M MAZ41800H MAZ4200 MAZ42000L MAZ42000M MAZ42000H
IR1 (A) IR2 (A) RZ () RZK () VR VR IZ = 5 mA IZ (V) Max (V) Max Typ Max (mA) Max 6.5 6.5 5 1 60 6 15 0.5 120 6.7 7.0 7.2 7.2 5 0.5 60 6 15 0.5 120 7.5 7.7 8 8 6 0.2 60 6 15 0.5 130 8.3 8.6 8.9 8.9 7 0.2 60 8 20 0.5 130 9.2 9.5 9.9 9.9 7 0.1 60 10 20 0.5 170 10.2 10.5 10.9 10.9 8 0.1 60 10 25 0.5 170 11.2 11.5 11.9 11.9 9 0.1 60 10 30 0.5 170 12.2 12.7 9 0.1 13.1 60 10 30 0.5 170 13.4 13.4 10 0.05 60 10 30 0.5 170 14.1 14.4 14.8 14.8 11 0.05 60 10 40 0.5 170 15.2 15.7 16.4 16.4 13 0.05 60 10 45 0.5 170 17 17.7 18.3 18.3 14 0.05 60 15 55 0.5 180 19 19.6
95
Gray
Red
Red
3.8 5.5
70
4.5 6.4
70
90 Brown Black
5.4 7.4
65
85 Brown Brown
8.4 10
65
85 Brown
Red
7 7
9.4 11 10 13
60 60 55
9.2 11.4 13
10.4 12.4 14
52
75 Brown Blue
12.4 14.4 16
47
70 Brown Gray
14.4 16.4 18
36
60
Red
Black
SKE00004CED
MAZ4000 Series
I Electrical characteristics within part numbers (continued) Ta = 25C
VZ = 22.0 V to 24.0 V (IZ = 5 mA)
Zener voltage Part number VZ (V) IZ = 5 mA Min Nom Max 20.8 22 23.3 20.8 21.3 21.86 21.45 22 22.55 22.1 22.7 23.24 22.8 24 25.6 22.8 23.3 23.97 23.5 24 24.7 24.35 25 25.6 Zener operating resistance
Temperature coefficient of zener voltage Terminal capacitance
Reverse current
Marking symbol
IR1 (A) IR2 (A) RZ () RZK () VR VR IZ = 5 mA IZ (V) Max (V) Max Typ Max (mA) Max 20.3 20.3 15 0.05 60 20 5.5 0.5 180 20.9 21.6 22.3 22.3 17 0.05 60 25 70 0.5 180 23 23.8
16.4 18.4 20
34
60
Red
18.4 20.4 22
33
55
Red Yellow
Marking symbol
MAZ4270 MAZ42700L MAZ42700M MAZ42700H MAZ4300 MAZ43000L MAZ43000M MAZ43000H MAZ4330 MAZ43300L MAZ43300M MAZ43300H MAZ4360 MAZ43600L MAZ43600M MAZ43600H MAZ4390 MAZ43900L MAZ43900M MAZ43900H
VZ (V) IR1 (A) IR2 (A) RZ () RZK () SZ (mV/C) IZ = 2 mA VR VR IZ = 2 mA IZ IZ = 2 mA Min Nom Max (V) Max (V) Max Typ Max (mA) Max Min Typ Max 25.1 27 28.9 24.8 25.3 26 26.7 24.8 19 0.05 60 25 80 0.5 200 21.4 23.4 25.3 26.3 27 27.7 25.8 27.3 28 28.7 26.8 28 30 32 27.8 28.3 29 29.7 27.8 21 0.05 60 30 80 0.5 200 24.4 26.6 29.4 29.3 30 30.8 28.8 30.2 31 31.8 29.7 31 33 35 30.7 31.2 32 32.8 30.7 23 0.05 60 35 80 0.5 200 27.4 29.7 33.4 32.2 33 33.8 31.7 33.2 34 34.9 32.7 34 36 38 33.6 34.1 35 35.9 33.6 25 0.05 60 35 90 0.5 200 30.4 33 37.4 35.1 36 36.9 34.6 36.1 37 37.9 35.6 37 41 36 37.1 39 36 27 0.05 60 130 0.5 250 33.4 36.4 41.2 38 40 36 39 41 36
27
50 Orange Black
25
45 Orange Orange
23
45 Orange Blue
21
45 Orange White
Note) 1. The VZ value is the one after power application for 20 ms at Ta = 25C. 2. The zener voltage temperature coefficient is the one for Tj = 25C to 150C.
SKE00004CED
MAZ4000 Series
Ptot Ta
Thickness of the printed-circuit board 1.6 mm Copper foil 0.035 mm, Hole distance 5 mm Anode side copper foil 3 mm Cathode side copper foil 3 mm
PZSM tW
500 320
IF V F
Ta = 25C 280
500
300 200
400
100
300
200
100
10
0.2
0.4
0.6
0.8
1.0
1.2
Pulse width tW
(ms)
IZ V Z
160 Ta = 25C Static Characteristics 120
I Z VZ
Ta = 25C Static Characteristics 40
IZ V Z
Ta = 25C Static Characteristics
100
MAZ4047 MAZ4051 MAZ4056 MAZ4062 MAZ4068 MAZ4075 MAZ4082
80
MAZ4091
40
40
MAZ4100
MAZ4030 MAZ4033
10
20
0 0 1 2 3 4 5 6
0 0 2 4 6 8 10 12
0 0 10 20 30 40
I Z VZ
200 Tj = 25C Dynamic Characteristics 160 200
IZ V Z
100 Tj = 25C 180 Dynamic Characteristics 160
MAZ4062 MAZ4082 MAZ4091
IZ V Z
Tj = 25C Dynamic Characteristics 80
MAZ4100
MAZ4051 MAZ4056
MAZ4024
60
MAZ4110 MAZ4130 MAZ4160 MAZ4200 MAZ4240 MAZ4270 MAZ4300 MAZ4330 MAZ4360
MAZ4075
40
MAZ4047
40 20
MAZ4068
60
20
0 0 1 2 3 4 5 6
0 0 2 4 6 8 10 12
0 0 10 20 30 40
80
60
20
MAZ4200
MAZ4024 MAZ4027
120
30
SKE00004CED
MAZ4000 Series
Zth tW
3 Heat sink Thickness t = 1.6 mm Copper foil t = 0.035 mm Anode side 3 mm Cathode side 3 mm Lead distance 5 mm
RZ IZ
104
103
0.3
0.1
10
0.03 0.1
0.3
10
30
100
1 101
10
102
SZ IZ
Temperature coefficient of zener voltage SZ (mV / C)
Tj = 25C to 150C MAZ4043 MAZ4039 1
SZ I Z
Temperature coefficient of zener voltage SZ (mV / C)
10 Tj = 25C to 150C 8 6 4 2 0 2 4 6 MAZ4047 MAZ4000 MAZ4091 MAZ4082 MAZ4075 MAZ4062 MAZ4056 MAZ4051 MAZ4068
12
16
20
24
SKE00004CED
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.