Beruflich Dokumente
Kultur Dokumente
PROPOSAL
OF 1 Kw
SOLAR POWER PACK
Submitted By
The most sophisticated Crystalline Photovoltaic Modules, guaranteed for products and performance, with full servicing and maintenance contract for life.
TYPICAL SYSTEM COMPONENTS PV Array A PV Array is made up of PV panel which in turn has several PV modules. These PV modules have environmentally-sealed collections of PV Cells which converts sunlight to electricity. The technical details of the solar modules proposed are attached in the form of catalogues. Balance of System Equipment (BOS) BOS includes module mounting structures and electrical harness systems used to integrate the solar modules into the structural and electrical systems. The electrical wiring systems include Junction Boxes for paralleling, fuses/switches, surge suppressors for the dc side.
The major components of the BOS are the Inverter and the Controllers. These form the brain of the system which does multi operation. Some of the major operations are intelligent charging of the battery bank, managing the charge level, conversion of Direct Current to Alternating Current and Grid Synchronization.
The other important BOS is the Battery Bank. For off grid usage this component provides the power storage option. The performance of an off grid system depends on how efficiently the Battery stores power and supports the load when called for. Different type of Secondary storage batteries are used all over the world but the commonly used is the Lead Acid type.
Size is very as per client requirement. These images of power conditioning unit (inverter + charge controller), batteries and structure are only for visibility and understanding.
BATTERY BANK
Construction Material Protection from corrosion Battery Bank Voltage configuration D.O.D allowed tubular battery Battery Efficiency Type Positive plate Negative plate Voltage of each cell Electrolyte
3
24 V / 300 Ah or As per Design 80 % max 85 % Tubular lead acid flooded electrolyte Tubular Pasted Flat 2 volts nominal Sulphuric Acid NONE 90 % + Continues sine wave -10 to +60 deg. C. IP under voltage, IP over voltage, OP overload, OP short circuit +/- 25% 3 phase, 50 Hz. +/- 25% 98 % Output Voltage , current & kWh IGBT MPPT 0.8 Complete Set Junction Box & Installation Accessories.
4 Power Conditioning Unit Efficiency Duty Waveform Ambient Protection Output Regulation Output Frequency Input DC bus voltage variation Relative Humidity Instrumentation Power Device Control Power Factor 5. Balance of System Consist of
Symmetric Diagram:
(Optional)
J.BOX
DEDICATED AC LOAD
UNIT
SOLAR ARRAY
BATTERY BANK
General Information:
Total Area Required Average Solar Insolation Average annual sunny days Latitude Longitude Altitude : : : : : : 120 Sq Feet.(approx) 4 hrs. (approx) 340 days (approx) Depends on Site Location Depends on Site Location Depends on Site Location
-:SCOPE OF WORK:1
Client
a. b.
c.
South facing shadow free area. Statutory approvals from local authorities/state electricity distribution company (if require) etc. Arrangement of Electricity, Water and Drainage for cleaning of panels with fresh water.
-:PRICE SCHEDULE:Sl. No. 1 2 3 4 5 6 7 Item Solar PV Module Galvanized Module Mounting Structure Power Conditioning Unit Battery Bank Cables & Other related accessories Junction Boxes, DCDB & Other accessories Earthing Set and other Balance of System Description Qnty. / Capacity 1000 Complete 1 1 Complete Complete Complete Unit Wp Set No. Set Set Set Set
-
1,50,000.00
1 2 3
Preoperative Expenses Installation & Commissioning Civil work for Structure & Control Room Total Cost of Installation & Commissioning Total Project Cost
Note : Price can vary after detailed SITE SURVEY
Depends on Site
1,50,000.00
-:GENERAL AND COMMERCIAL TERMS & CONDITIONS:Price Basis: Taxes & Duties Ex-Site, Vadodara On Materials: 5% VAT will be charged as extra on actual. If during dispatch due to change of government policy if any new taxes are applicable or rates changed the same will be in consignee account. Prices are inclusive of Packing. Packing shall be done as per our standard practice.
Packing:
Our offer excludes freight and insurance charges. The same will charged extra.
Validity of Offer:
This offer is valid for 30 days from the date of offer and thereafter subject to our reconfirmation.
Terms of Payment:
For Supply 50% of the total order value as an advance along with purchase order / LOI. 45% of the total order value at the time of material receipt (Pro-Rata Basis). 5% of the total order value after successful completion of project.
Within 30 days from the date of your technically and commercially clear Purchase Order along with advance. The Delivery/Completion shall be reasonably extended if:- The technical or commercial data required by us to execute the order including advance payment are not made available in time or if subsequent changes, which delay the delivery, are made by the purchaser. - If the purchaser is behind the schedule with the work he has to carry out or is late in fulfilling the contractual obligations.
Limitation to Liability:
In no event shall we be liable for any consequential damages and/or losses arising out and connected with this supply order in any manner what-so-ever. Our liability in respect of any defect or failure of the equipment supplied or for any loss, injury, damage attributable thereto, is limited to making good by replacing or repairing defects which under proper use appear therein (provided the equipment is installed, operated, maintained as per our instruction manual) and arise solely from faulty design, materials or workmanship within warrantee period. At the termination of which period, all liability on our part shall cease.
Warrantee / Guarantee:
Solar Module 10 Years Limited Warranty on Product and Workmanship 10 Years Limited Warranty on 90% Power Output 25 Years Limited Warranty on 80% Power Output For Balance Supplies 24 Months Limited Warranty Parts and Components, which are repaired or replaced during such period, are warranted for the original warranty period only and will not carry any extended warranty. If the equipment is not repairable at site the same has to be sent at our workshop on freight prepaid basis after obtaining our consent in writing and we shall make good the defect and return back to you on freight to pay basis. The warranty shall not apply to defects resulting from: - Willful damage or negligence, normal wear and tear, - Installation and/or maintenance by Purchaser or a third party without suppliers prior written consent, - Misuse or abuse of Equipment. - Modifications or alterations made by Purchaser or a third party without supplier's written consent. We shall retain the right on equipment, materials or parts supplied by us under this quotation until full value thereof as per our invoice has been fully paid to us as per terms and conditions. The information shared by us of any nature during tendering or execution of the contract may be treated truly confidential. Due respect should be taken care to respect the confidentiality of intellectual property. The Confidentiality of this offer should be maintained strictly and in no case without seeking our written permission this document can't be shared, disclosed, reproduced, copied or circulated. We shall be under no liability if performance of contract on our part is prevented or delayed whether in whole or in part due to any of the causes beyond our reasonable control. The supplier shall not be held responsible for any delay, loss or damage arising from any cause, matter or thing beyond the supplier's / sub-supplier's reasonable control, including, without prejudice to strikes, lockouts, go-slow, delays in approval of drawing, rejection of any important part of work, default of sub supplier in supplying the parts / raw materials, lack of transportation facilities, inability to obtain necessary labour or materials, official prohibition of transit of goods, requisition by legal authorities of personal property, movable or immovable, restriction in power supply or any other action of the government, riots, war or warlike conditions, acts of nature or God such as epidemics, floods, earthquakes, fires etc. whether such delay or impediment occurs before or after the time or extended time for dispatch or completion. In case the supply is affected by the force majeure conditions, we shall intimate the purchaser, within a reasonable time, of such occurrence and suitable extension to the delivery time shall be granted.
Force Majeure:
Prepared By