Beruflich Dokumente
Kultur Dokumente
PRODUCT CATALOG
Table of Contents
NEW! Products.................................................................................................. 4 BULLDOG JACKS A-Frame Jack with Powered Drive - 4,000 lbs................................................ 5 Round Jacks - 2,000 - 7,000 lbs................................................................. 6-9 Square Jacks - 5,000 - 10,000 lbs.......................................................... 10-13 Square Jacks - Heavy Duty - 12,000 lbs................................................. 14-15 Square Jacks - 2-Speed, 12,000 lbs............................................................. 16 Powered Drive Kit ......................................................................................... 17 Tandem Landing Gear - Heavy Duty, 2-Speed - 90,000 lbs............................................................................... 18-19 Rack / Gear Jacks - 750 - 1,200 lbs....................................................... 20-21 Jack Replacement Parts ......................................................................... 22-23 FULTON JACKS F2 Marine / Recreational Jacks 1,600 - 2,000 lbs...................................................................................... 24-26 EZ Move Trailer Handle................................................................................ 27 Marine / Recreational Jacks 400 - 5,000 lbs. ...................................................................................... 28-29 Stabilizers - 2,000 - 3,000 lbs....................................................................... 29 BULLDOG COUPLERS Heavy Duty Couplers - 5,000 - 25,000 lbs.. ............................................ 30-31 Gooseneck Couplers - 20,000 - 30,000 lbs............................................ 32-33 Coupler Balls................................................................................................... 33 FULTON COUPLERS Stamped Couplers - 2,000 - 14,000 lbs................................................. 34-35 Fold-AwayTM Couplers / Hinge Kits 3,500 - 9,000 lbs...................................................................................... 36-38 FULTON WINCHES How to Select a Hand Winch.......................................................................... 39 F2 Trailer Winch - 2-Speed 3,200 lbs........................................................ 40 F2 Trailer Winch - Single Speed 2,000 lbs................................................. 41 Trailer Winches - Single Speed 600 - 2,100 lbs......................................................................................... 42-43 Trailer Winches - 2-Speed 2,000 - 3,700 lbs...................................................................................... 44-45 Brake Winches - 600 - 2,500 lbs............................................................ 46-47 Worm Gear Winches - 1,500 - 3,000 lbs.. ..................................................... 48 Winch Accessories.......................................................................................... 49 TRAILER ACCESSORIES Spare Tire Carriers.................................................................................... 50-51 TECHNICAL MANUAL SAE International J2638 Standard................................................................ 52 Weld-On Bracket Mounting Positions, F2 Jack........................................... 53 Adjusting the Swivel Mount Height, F2 Jack.............................................. 54 Jack Replacement Quick-Reference Guide............................................. 55-57
Our dedication to meeting the evolving requirements of the industries we serve means we are never satisfied with the status quo. We are never done changing, growing, and improving to develop new product technology, design custom products for your specific applications, and add more standard products. By continually striving to be better, we hope to always be your vendor of choice for trailer and towing products.
All logos / names / trademarks are copyrights of their respective companies. 2010 Cequent Performance Products Inc. Reproduction of this catalog (or any part thereof) without the permission of Cequent Performance Products Inc. is prohibited by law.
500185
500186
Measurements
Powered A-Frame Jack, White (or black) Cover 9.75" 34.50" 24.00" 4,000 lbs. 500185 17" Replacement service kits
500190 500191 500192 500193 500194 500196 500186 17" 9.75" 34.50" 24.00"
Measurement with drop leg fully retracted or extended. White cover. Measurement with drop leg fully retracted or extended. Black cover. Drop leg and pin kit. Manual override crank bolt kit. Bottom cover and screws. Level assembly and screws. Manual override cover kit. LED light assembly and bulb.
Ind. Pack Ind. Pack Ind. Pack Polybag Polybag Polybag Polybag Polybag
Round Jacks
RoUNd JackS
BULLDOG round jacks are recognized as the industry standard by leading agricultural, commercial, horse, livestock, and other trailer manufacturers. For more than three quarters of a century, BULLDOG jacks have been demonstrated to be the most reliable, field-proven jacks on the market. Smooth, comfortable, ergonomic design. Dependable vertical and side load capacity. Proven reliability for long term use at rated loads. Precision fitted parts for extra stability. Travel and Clearance Dimensions A-Frame models listed have grey painted outer and inner tubes. All other models have grey painted outer and clear zinc inner tubes. Travel and Clearance Dimensions Travel and Clearance Dimensions CUSTom FiNiSHeS ARe AVAilAble UPoN ReQUeST . Travel and Clearance Dimensions
2.7" 6.65" RADIUS 2.7"
6.65" RADIUS 6.65" RADIUS
6.65" RADIUS
6.65" RADIUS
2.7"
2.7"
2.7"
C
5.80" RADIUS
6.65" RADIUS
C
2.7"
C
5.80" RADIUS 4.6" 4.6"
A/B A/B
155022
A/B
A/B
BDG 2K TW W MNT
BDG 2K TW W MNT
THE CHOICE WHEN APPLICATION REQUIRES COMPLIANCE WITH ASABE S485 STANDARDS
151401
178201
Round Jacks
2,000 lbs.
5,000 lbs.
7,000 lbs.
Topwind 155022 u TWL 155 15" 8.80" 23.80" 12.20" Weld-on/bolt-on bracket. Less wheel or base. Topwind 155033 TWL 155X 15" 5.40" 20.40" 16.00" Weld-on/bolt-on bracket. Less wheel or base. Sidewind 155157 SWL 155X (RV) 13" 8.60" 21.50" 13.00" External gear box. Handle to front. Weld-on/bolt-on bracket. Less wheel or base. Sidewind 155010 SWL 155 X 13" 7.00" 20.00" 14.50" Weld-on/bolt-on bracket. Less wheel or base. Topwind 155032 u TWL 155 HD 15" 10.30" 25.30" 10.20" Weld-on/bolt-on bracket. Less wheel or base. (5000 lb. vertical load capacity) Topwind 175029 TWL 175 15" 10.82" 25.82" 10.70" Weld-on/bolt-on bracket. Less wheel or base. Sidewind 1700100317 SWL 175 15" 8.60" 23.60" 12.75" Weld-on/bolt-on bracket. Less wheel or base.
NOTE: Review price list or contact customer service for package quantities and full part number. Other custom-made designs are available upon request. u DENOTES MOST POPULAR
155157
158451
Round Jacks
standard round jacks
Lift Capacity
Handle Part No. Model No. Travel Measurements (SEE DIAGRAM) A RETRACTED B EXTENDED C CLEARANCE Styles
Description
Lbs.
2,000 lbs.
5,000 lbs.
Topwind Topwind
150000
5,000 lbs.
Sidewind 170205
NOTE: Contact Price List or Customer Service for package quantities and full part number. Other custom-made designs are available upon request. u DENOTES MOST POPULAR
151401
151443
Round Jacks
0050240300
500239
Style
500256
500105 / 500171
500180
500148
Style
017125
CE555 0301
500244
Tube mounts
0050050300 Weld-on, male 0152790300 Weld-on, male 0050240300 Weld-on, female 800004-01 Bolt-on 800042-01 Bolt-on 0152730300 Weld-on, male 0152710300 Weld-on, female 0031550300 Weld-on, female 005122 Weld-on, female 9/16" 5/8" 5/8" 9/16" 5/8" 9/16" 9/16" 3/4" 7/8" 2.25" 2.25" 2.50" 2.25" 2.25" 1.88" 1.62" 3.00" 2.80" 1.50" 1.50" 1.62" 1.50" 1.50" 1.13" 0.88" 1.59" 1.58" 0.75" 0.75" 0.88" 0.75" 0.75" 0.75" 0.75" 1.41" 1.22" 2.00" 2.00" 3.00" 2.00" 2.00" 2.00" 2.50" 3.25" 4.00" 2.50" 2.50" 2.50" 2.50" 2.50" 2.50" 2.00" 2.50" 3.25"
D B C
0152790300
Square Jacks
SQUare jackS
Square Up for Side Load Strength Compared to round jacks of similar capacities, BULLDOGs 5,000 lb. support capacity square jack dramatically improves side load strength while maintaining the economical benefits of lower capacity jacks. It has the extra side load capacity you need without the costs of increasing overall capacity. 12-gauge square tube is 70% stronger than 12-gauge round tube for more side load and support strength with the same lift capacity. 4.62" outer tube overlap at full extension for additional side load strength. Weather-resistant materials and coatings. Painted outer tubes, clear zinc THE CHOICE WHEN inner tubes. APPLICATION REQUIRES Proven, reliable mechanical elements provide dependable COMPLIANCE WITH strength and long-lasting, durable performance. ASABE S485 STANDARDS Mounts included in this series of jacks.
195356
195312
195321
10
Square Jacks
Lbs.
square jacks
Support Capacity
Handle Part No. Model No. Travel Measurements (SEE DIAGRAM) A RETRACTED B EXTENDED C CLEARANCE Styles
TWL 195 15" 15.20" 30.20" 7.00" DTSXFQ w/P&C SWL 195 15" 15.10" 30.10" 9.25" DTSXFQ w/P&C
17.5 18.4
Topwind 195318 TWL 195 15" 7.90" 36.50" 14.70" DL-DFXQ 22.40" 14.70" 5,000 lbs. Topwind 195321 u TWL 195 FL-FXQ 15" 7.40" Topwind 195322 TWL 195 15" 7.90" 36.50" 14.70" DL-DFXQ Direct weld Topwind 195301 u TWL 195 DQ 15" 22.20" 37.20" N/A Topwind 195304 u TWL 195 15" 22.60" 51.20" N/A DL-DXQ Topwind 195319 TWL 195 FL-BXQ 15" 22.30" 37.30" N/A 15" 22.10" 37.10" N/A 5,000 lbs. Topwind 195320 TWL 195 FL-XQ Sidewind 195351 SWS 195 DQ 10" 17.60" 27.60" N/A Sidewind 195352 SWL 195 DQ 15" 24.40" 39.40 N/A Sidewind 195354 u SWL 195 DL-DXQ 15" 25.50" 54.10" N/A Sidewind 195368 SWL 195 FL-XQ 15" 24.40" 39.40" N/A Sidewind 195369 SWL 195 FL-XQ 15" 24.20" 39.20" N/A
Drop leg with base. Drop leg offers 13.50" 19.3 additional adjustment. Crank included. Fixed leg less base. Drop leg offers 13.50" 13.8 additional adjustment. Crank included. Drop leg with base. Drop leg offers 13.50" additional 19.3 adjustment. Crank included. Zinc-plated inner and outer tubes. Fixed leg with base. Crank included. Drop leg with base. Drop leg offers 13.50" additional adjustment. Crank included. Fixed leg with caster base. Crank included. Fixed leg less base. Crank included. Fixed leg with base. Crank included. Fixed leg with base. Crank included. Drop leg with base. Drop leg offers 13.50" additional adjustment. Crank included. Fixed leg with caster base. Crank included. Fixed leg less base. Crank included. 14.1 18.2 14.1 12.7 12.4 16.1 20.2 16.1 14.7
Patent Pending. NOTE: Contact Price List or Customer Service for package quantities and full part number. u DENOTES MOST POPULAR
11
Square Jacks
SQUare jackS
BULLDOGs 8,000 lb. support capacity square jack serves the agricultural, industrial, construction, horse/livestock trailer, and utility/cargo trailer markets. We have packed Big Jack Power into this compact design! The compact design of these jacks makes them ideal for tight-fitting applications where 3" and 4" square tube jacks are too big! This is a perfect transition from BULLDOGs round jack product line. Use the painted outer tube as the final finish or primer. Zinc-plated inner tube and drop leg. 4.7" Outer / inner tube overlap - results in optimal side load performance. 5/8" screw stem - provides insurance against screw stem twistng off. Patented screw nut stop - prevents screw and/or nut damage when jack is fully extended. Topwind models - bushing in top cap, eagle claw grip Sidewind models - 1/4" cross pin connects gear train to screw stem - guards against shearing jack pin. Sidewind models - 1:1.33 gear ratio.
2.95" 9" RADIUS 2.95"
C
4.00"
8.5" RADIUS
8.5" RADIUS
4.00"
2.53" SQ.
2.53" SQ.
2.53" SQ.
2.53" SQ.
A/B
A/B
7K STATIC DL W MOUNT
7K STATIC
190705
190754
Square Jacks
Support Capacity
Handle Part No. Model No. Travel Measurements (SEE DIAGRAM) A RETRACTED B EXTENDED C CLEARANCE Styles
8,000 lbs.
24.0
Drop leg with heavy-duty base. Drop leg offers 13.50" 28.5 additional adjustment. Crank included. With tubular swivel mount (includes mating mount, pin and chain). Drop leg with heavy-duty base. Drop leg offers 13.50" additional adjustment. Crank included. Fixed leg with heavy-duty base. Crank included. Drop leg with heavy-duty base. Drop leg offers 13.50" additional adjustment. Crank included. 23.5 16.5 25.0
Direct Weld
8,000 lbs.
Patent Pending. NOTE: Other custom-made designs are available upon request. u DENOTES MOST POPULAR
12
Square Jacks
SQUare jackS
BULLDOGs 10,000 lb. support capacity square jack fills the gap between 8,000 lb. and 12,000 lb. square jack product offerings. If the existing 8,000 lb. support capacity square jacks are too small or the 12,000 lb. support capacity square jacks are too big, look no further your application and pricing requirements have been met! This is the highest quality and best performing jack available in the marketplace today, a total balance between capacity, speed, and effort. Heavy-gauge 3" square tubing allows for direct weld mounting wherever the application allows no burn through. Use the painted outer tube as the final finish or primer. Zinc-plated inner tube and drop leg. Heavy-duty base, with reinforcement ribs, zero water retention. Precision manufactured for long term reliability and smooth, easy cranking. Grease zerk for easy lubrication as needed. Oil-impregnated bushing for improved bearing and gear life. THE CHOICE WHEN APPLICATION REQUIRES Direct weld to outer tube is standard. Travel and Clearance Dimensions COMPLIANCE WITH Sidewind models - 1:1.86 gear ratio.
180304
2.88"
12" RADIUS
10.5" RADIUS
180455
A/B
3.00" SQ.
A/B
6.21" 3.00" SQ.
Square Jacks
Support Capacity
A= Retracted B= Extended
10,000 lbs. support capacitY 7,200 lbs. lift capacitY
Description Lbs.
Handle Part No. Model No. Travel Measurements (SEE DIAGRAM) A RETRACTED B EXTENDED Styles
Drop leg with heavy-duty base. Drop leg offers 10.12" additional adjustment. Crank included. Drop leg with heavy-duty base. Drop leg offers 13.50" additional adjustment. Crank included. Drop leg with heavy-duty base. Drop leg offers 13.50" additional adjustment. Crank included.
Patent Pending. NOTE: Contact Price List or Customer Service for package quantities and full part number.Other custom-made designs are available upon request.
13
Strong, durable, and sturdy, the BULLDOG 12,000 lb. support capacity square jack is the BIG reason why BULLDOG has carried the load in agricultural, construction, heavy-duty utility, and horse/livestock trailer industries since 1923. All BULLDOG 4" square jacks are rated for 12,000 lb. support capacity and 10,000 lb. lift capacity. The strength of the product, plus the wide variety of styles, makes this jack the best choice in its product class. 4" square tubing, 7-gauge superior alloy steel. Painted outer tube, inner tube, and drop leg. Drop leg option with 5 positioning holes. Easy-access gear box with grease fitting for routine maintenance. Spring return drop leg or non-spring A/B return drop leg. 12.5" screw travel, 13.5" of additional adjustment with drop leg. Front facing drop leg plunger pin or side facing drop leg plunger pin. Pin to front tandem application Travel Clearance and Clearance Dimensions Dimensions Painted (with or without labels) Travel and Travel and Clearance Dimensions or powder paint optional. Sidewind models 182800 1:1.5 gear ratio.
RADIUS
9.5" RADIUS 9.5" RADIUS
9.5" RADIUS
16.2"
16.2"
16.2"
13.5" RADIUS
13.5" RADIUS
C
18.2"
Pin to Side
4.00" SQ.
C=CLEARANCE
182415
13.5
A/B
A/B
18.2"
A/B
A=RETRACTED B=EXTENDED
4.00 SQ.
18.2
square jacks 12,000 lbs. support capacitY 10,000 lbs. lift capacitY
Support Capacity Handle Part No. Model No. Travel Measurements (SEE DIAGRAM) A RETRACTED B EXTENDED C CLEARANCE Styles Description
Pin to Front
Lbs.
12,000 lbs.
Patent Pending. NOTE: Contact Price List or Customer Service for package quantities and full part number. Other custom-made designs are available upon request. u DENOTES MOST POPULAR
14
square jacks 12,000 lbs. support capacitY 10,000 lbs. lift capacitY
Support Capacity Handle Part No. Model No. Travel Measurements (SEE DIAGRAM) A RETRACTED B EXTENDED C CLEARANCE Styles Description
12,000 lbs.
52.0
Part No.
Description
Lbs.
182524
005122
701466
Removable Cranks
Part No. 701466 Non-slotted design for better weather resistance and 2-speed performance Remains firmly attached for convenience or may be removed easily for theft deterrence Fits 1" schedule 40 steel pipe for remote mounting
15
The First 2-Speed Gearbox Designed with a Drop Leg Jack in Mind. BULLDOGs 2-speed 12,000 lb. support capacity square jack makes cranking easier when fully loaded and faster when unloaded. In low gear, the ratio delivers full lifting power at a supersmooth, easy-lifting 27 turns per 1" (planetary) and 29 turns per 1" (traditional) of travel. In high gear, the cranking ratio is a speedy 9 turns per 1" of travel, the fastest in its weight class. State of the art 2 speed gearbox with power and speed for the most effective and efficient jack at all loads. Designed for todays standard agricultural, construction and industrial trailer applications. User friendly design makes operation smooth and easy. Engineered alloys for enhanced strength, stability and sideload capability. Planetary gearbox fits within the width profile of the jacks outer tube, Travel and Clearance Dimensions eliminating the need for spacers.
3.9 2.8 5.8 3.0 3.3 8.1 3.8 16.0 4.00 SQ. 4.00 SQ. .88 SHIFT 15.9 3.9 2.8 16.0
.75 SHIFT
Award Winning Design - 2004 ASABE AE50 Award & Wisconsin 2004 Governors Award
A/B
A/B
183816
Traditional
Companion Lbs
183902
Gearbox Part No. Model No. Travel Measurements (SEE DIAGRAM) Description A RETRACTED B EXTENDED Styles
16
17
18
Tandem Non Drop Leg Landing Gear - Set includes Direct Weld 2-Speed & Single Speed Jacks & Crank. Cross Shaft not included. Tandem Non Drop Leg Landing Gear - Set includes TTMA Bolt-On Mount 2-Speed & Single Speed Jacks & Crank. Cross Shaft not included. 2-Speed Jack, 22.5K Lift, Direct Weld. Crank sold separately. 2-Speed Jack, 22.5K Lift, TTMA Bolt-On Mount. Crank sold separately. Single Speed Jack, Direct Weld. Crank sold separately. Single Speed Jack, TTMA Bolt-On Mount. Crank sold separately. Crank, Mounting Hardware Included.
Heavy duty leg band for added strength. Sand shoe designed to maximize connection strength
19
165311
162300
165412
C C
A/B
A/B
A/B
20
Description
L-Bend Bolt-on 162 series 750 lbs. 162100 u 162 D A-Frame 165 Series 750 lbs. 165111 u 165 D 1,200 lbs.
162300 u 162 W
018155 018230-01 16" 3.5" 19.5" 20.2" 165211 165 R 018155 018007 16" 7.5" 23.5" 20.3" 165311 u 165 W 018155 018006 16" 7.5" 23.5" 20.3" 165411 u HD 165 W 019141 019060 16" 7.5" 23.5" 20.3" 165412 HD 165 WX 019141 019080 19" 7.5" 26.5" 23.3" 018308 16" 7.5" 23.5" 20.3" N/A N/A N/A N/A N/A
14.9
*Gear boxes and rack post also sold separately. u DENOTES MOST POPULAR NOTE: Contact Price List or Customer Service for package quantities and full part number. Other custom-made designs are available upon request.
Mounting Options
A-Frame
Welds or bolts to top of A-frame coupler
Bolt-On
Fits up to 3" x 5" rectangular tongue
162 Series
165 Series
169 Series
Caster Wheels
Polyolefin Wheel 750 lb. capacity Steel Wheel 750 lb. capacity 1,200 lb. capacity - heavy-duty
Disc Foot
Welded to Jack Post 750 lb. capacity
R Models
W Models
D Models
21
Part No.
Description
Get the attention of your customers with attractive, colorfully packaged BULLDOG Genuine Replacement Part Kits in clear plastic clam shells. Engineered for maximum strength and durability, a display of these top selling genuine BULLDOG replacement parts is a good way to increase overall sales. Consumers know the best way to maintain the integrity of their BULLDOG products is to always use genuine replacement parts manufactured by the most trusted name in the industry.
Capacity Part No. Description
bearing Kits
500251 Bearing kit. For 2,000 lb. capacity models. SERIES: 150
500223 500224
Thrust bearing. For 5,000 lb. capacity models. SERIES: 170, Crown 5,000 lbs. Thrust bearing. For 8,000 lb. capacity models. SERIES: 190, Crown 7,000 lbs.
Sidewind crank kits 2,000 lbs. 500256 Sidewind crank (5.80" radius) assembly
and gear kit. SERIES: 150 with plastic cap.
pin kits
500178 1/2" plunger pin assembly kit. SERIES: 150, 160, 170
500105 500171
Sidewind crank (6.50" radius) assembly with black knob. SERIES: 139, 159, 170, Crown 2,000/3,000/5,000 lbs. Sidewind crank (8.50" radius) assembly with black knob. SERIES: 190 square jacks, Crown 7,000 lbs.
9/16" pull pin 3.5" long with chain and drive screw. (5,000 lbs. - Topwind only) SERIES: 150, Topwind-170 5/8" pull pin 3.5" long, with chain, and drive screw. (5,000 lbs. - Sidewind only) SERIES: Sidewind-170, Crown 2,000/3,000/5,000 lbs. 5/8" pull pin, 4.25" long, with chain, and cotter pin. SERIES: 190, Crown 7,000 lbs.
topwind crank kits 2,000 lbs. - 500180 Topwind crank (6.75" radius) assembly with red knob. 5,000 lbs.
SERIES: Topwind-150, 160, 170 Topwind crank (9.00" radius) assembly with black knob. SERIES: Topwind-190 7,000 lbs. 500177 3/4" drop-leg plunger pin kit SERIES: 180
7,000 lbs. 8,000 lbs. knob kits 2,000 lbs. 5,000 lbs.
500148
gear kits
500248 500246 Black knob, teardrop. SERIES: 139, 159, Sidewind-170, 90, Crown Red knob, BULLDOG. SERIES: 150, 160, Topwind-170 500106 Sidewind gear kit. For up to and including 5,000 lb. capacity models. SERIES: 139, 159, 170 Crown 2,000/3,000/5,000 lbs. 500156 5002581360 500241 Sidewind gear kit. For 8,000 lb. capacity models. SERIES: 190, Crown 7,000 lbs. with 1/2" inside bottom gear Sidewind gear kit. SERIES: 190 Crown 7,000 lbs. with 5/8" inside bottom gear Swivel retaining ring. Fits most jack capacities. SERIES: 150, 160, 170
Mount Kits
500239 Trailer mount, male, weld-on, for 9/16" pin. (5,000 lbs. - Topwind only) SERIES: 150, Topwind-170
22
Part No.
Description
Part No.
Description
PolY Wheels
0917501S00 6" poly wheel only 750 - 1,200 lbs. rated 018508 Caster assembly with 6" poly wheel for 155154 and 155200, king pin - 1,000 lbs. rated CE555 6" caster with 2" inside diameter fitting for 2" jack tube 1,200 lbs. rated
Bearings
001020 001021 001015 Bearing 7,000 lbs. square 5/8" inner diameter Bearing 10,000 lbs. square Bearing 12,000 lbs. square
Drop Legs
019705 Round tube, works with thin wall inner tube 2,000 lb rated DF35000324 For square jack, pin included 3,000 - 5,000 lbs. rated 500270 For square jack, pin included 8,000 lb. rated
017182 6" steel wheel only, unpainted 750 - 2,000 lbs. rated 018507 Caster assembly with 6" steel wheel for 155159 and 155300 1,000 lbs. rated Reduces the rated lift capacity. CA5550301 Caster adapter plate
topwind cranks
Weld-on flat, retaining ring swivel plate for 3/8" diameter plunger pin. Weld-on, swivel bracket, 1/2" pin 2,000 - 5,000 lbs. rated
Pins
sidewind cranks
800144 Sidewind crank (10.50" radius) 10,000 lbs. square 015181 Sidewind crank, vertical clevis (13.50" radius) 12,000 lbs. square
700377 3/4" pull pin (4.75" long) with chain without drive screw 7,000 lbs. 701029 7/8" pull pin (5.12" long) with chain without drive screw 12,000 lbs.
Sidewind crank assembly with 13.50" radius. Mounting hardware not included. Extends 17.50" from the jack. Black primed finish. 800102 Horizontal clevis, Sidewind handle. Sidewind crank assembly with 13.50" radius. Mounting hardware not included. Extends 17.50" from the jack. Silver powder paint finish. 800141 Horizontal clevis. 701466 Removable sidewind crank with 13.5" offset radius. All zinc-plated crank. Dual handle grips for cranking and shifting. For use with OEM supplied outboard bushing or may be attached directly on jack gearbox. 800090 Sidewind crank, horizontal clevis (13.50" radius) 12,000 lbs. square
sidewind gears
020040/ 020041 500212 1 each required 10,000 lbs. 1 each required 12,000 lbs.
23
1413020134
1413040134
LIFT CAPACITY : 1,600 LBS.
Fulton, the industry leader for high performance marine jacks, is proud to introduce a revolution in trailer jack engineering. The F2, designed for use with marine, recreational and utility trailers, continues the Fulton heritage of innovation rethinking every feature and challenging industry conventions. The result is a reengineered high quality product that will transform the industry. Its so strong and reliable that Fulton is backing it with an unprecedented LIMITED LIFETIME WARRANTY. Maintenance free - designed to eliminate the need for lubrication and maintenance. Corrosion resistant coatings cover internal and external components will hold up in salt water and other harsh environments. Ergonomic design - crank, release Revolutionary Adjustable Locking Wheel Wedge pin and integrated wheel wedge are Mount & Swivel System made of strong, engineered plastic for a comfortable touch. Stylish design - compliment your boat and customize your trailers styling. Sealed and lubricated one-piece gearbox. PREMIUM FINISH Twin track and wide track versions available. Available in bolt-on and weld-on versions for up to 5" tongues. Handle Hold-Up secures handle to jack tube when in stowed position. limited Lifetime warraNtY
Packaging
Description
1,600 lbs.
1,600 lbs.
500129 500130 500131 500132 500133 500134 500135 500136 500137 500138 500139 500277
Bagged Bagged Bagged Bagged Bagged Bagged Bagged Bagged Bagged Bagged Bagged Bagged
NOTE: Contact Cequent Customer Service for package quantities. Twin Wheel US Patent D568,575 and Wide Wheel US Patent D570,072 and Handle US Patent D577,175
24
PREMIUM FINISH
Environmentally friendly Self-healing Maximum corrosion resistance Used in salt water environments and other demanding climate applications 1200 hour salt spray rating per ASTMB117
NOTE: Contact Cequent Customer Service for package quantities. Handle US Patent D577,175
25
F2 Coupler, Class 4, with special cutout mounting area to accept jack. Versatile handle orientation mounting options: front, driver side or passenger side facing. 2,000 lb. lift capacity Removable foot/wheel options (purchase separately): 7" round articulating footplate (2,000 lb. lift capacity) 7" diameter twin track wheel (1,600 lb. lift capacity) 8" diameter wide track wheel (1,600 lb. lift capacity) limited Lifetime warraNtY
1413250334
PREMIUM FINISH
Environmentally friendly Self-healing Maximum corrosion resistance Used in salt water environments and other demanding climate applications 1200 hour salt spray rating per ASTMB117
44305F0317
Adjustable Height A-Frame Jack. NOTE: Requires F2 Coupler Class 4, 2-5/16 Ball, 10,000 lb. Capacity Coupler 7" Twin Track Wheels, Includes Pull Pin Assembly 8" Wide Track Wheel, Includes Pull Pin Assembly 7" Round Articulating Footplate, Includes Pull Pin Assembly
500266 500267
Twin Wheel US Patent D568,575 and Wide Wheel US Patent D570,072 and Handle US Patent D577,175
500265
500266
500267
26
27
TJ1200
XP10
XP15
INDUSTRY LEADING
CORROSION pROTECTION
XPD15L HD5000
210TB11Z XP10 XP10W XP10L
A/B
HD2500
1410050149 14.5" N/A 4.5" Silver powder coat finish with 6" diameter caster Sidewind TJ12000 13.0" 23.0" 11.0" Zinc with 6" diameter caster, Bolt-On 1,200 lbs. Sidewind TJ120W0301 13.0" 23.0" 11.0" Zinc with 6" diameter caster, Weld-On Bolt-Thru Swivel Sidewind XP10 u 12.75" 22.75" 10.50" Zinc with 6" diameter caster Sidewind XP100W 14.75" 24.75" 10.50" Zinc with 8" diameter caster, weld-on 1,200 lbs. Sidewind XP10W u 12.75" 22.75" 10.50" Zinc with 6" diameter caster, weld-on Sidewind XP15 u 12.75" 22.75" 12.50" Zinc with 8" diameter caster Sidewind XP15L 12.75" 24.75" 14.50" Zinc with 8" diameter caster Sidewind XP15W u 12.75" 22.75" 12.50" Zinc with 8" diameter caster, weld-on Sidewind 1411300301 14.75" 24.75" 10.50" Zinc with 8" diameter independent caster, weld-on, 1,500 lbs. torsion axle version Sidewind XPD15L 12.75" 24.75" 12.50" Zinc with 6" diameter caster, dual wheel
Silver 3/8" Powder Coat Z-Max 600 3/8" Z-Max 600 3/8" Z-Max 600 Z-Max 600 Z-Max 600 Z-Max 600 Z-Max 600 Z-Max 600 Z-Max 600 Z-Max 600 Z-Max 600 Z-Max 600 Z-Max 600 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" N/A 9/16" N/A
Zinc, heavy-duty with 6" diameter caster Zinc, heavy-duty with drop leg Zinc, heavy-duty with drop leg
NOTE: Contact Cequent Customer Service for package quantities and full part numbers. u DENOTES MOST POPULAR P/N 98299, Rev. C, 05/10, 2010 Cequent Performance Products, Inc.
handle kit
0933301S00 TJ503/C, TJU503, PMJ53, TJ507/C, PMJ75, CS750, GR700/TJ712, XP10//L/W/WC, XP100 0933305S00 TJ1055, TJ1057, TJ1222, TJ255, TJD125, TJ122F, XP15/L/W/WC, XP15L 0933302S00 TJ503, XP10 (all 1,2000 lbs. capacity) 0933306S00 TJ1055, TJ1057, TJ1222, TJ1255, TJD125, TJ122F, XP15/L/W/WC, XPF15L plunger pin kit 0933307S00 TJ1055, TJ1057, TJ1255, TJD125, TJ122F, XP15/L/W/WC, XPF15L XP10 (all 1,200 lb. capacity)
snap ring
P9086-00
cap
All models Cap, Dome - 2" Jack Tube w/1D Tab, 1 Zerk Cap, Dome - 2-1/4" Jack Tube w/1 Screw, 1 Zerk Cap,B Dome - 2-1/4" Jack Tube w/2 Screws
StabilizerS
Square tube stabilizers are fabricated from high strength, structural steel tubing, and are yellow zinc-plated for excellent corrosion-resistance. Common applications include cargo trailers, industrial implements, and equipment outriggers.
C D D B B A C
5 0 3
AA
USE .375" BOLTS
AA
A A
SJ4
SJL8
SJ1 210TB11Z 35SM28FZ
A= Range
STABILIZERS STABILIZERS
SJL8 SJL8
stabilizers
Stabilizers 2,000 lbs. - Pull
Assembly drop leg and 1-1/2" outer. 2" square outer, oil finish. Square drop leg with adjustment holes. Square drop leg with adjustment holes.
29
44150W 028630
collar-lok CoUplerS
Tongue mounts No. 2 Tongue Mount
3B StYle
7,000 lbs. gross trailer weight for 2" ball.
4B StYle
12,500 lbs. gross trailer weight for 2-5/16" ball.
5B StYle
15,000 lbs. gross trailer weight for 2-5/16" ball.
H - High Profile
M - Pin OnlY
caSt CoUplerS
Cast head couplers Wedge-Latch A-Frame Mount
Patent Pending
Adjustable Height cast head couplers adjustable height Wedge-Latch Adjustable bracket Height Coupler
US Patent 6,505,849
Cast A-frame couplers with patented replaceable hardware for longer service life.
Failure to close coupler securely before towing or failure to use with specified ball size may result in serious injury or death.
WARNING
30
no. 2 round tubular tongue mount 5,000 lbs. 12,500 lbs. 5,000 lbs. 7,000 lbs. 12,500 lbs. 5,000 lbs.
028381 028242 028461 028442 2B2H 2B2M 4B2H 4B2M 10-3/4" 10-3/4" 12-3/4" 12-3/4" High Profile 2" Pin Style 2" High Profile 2-5/16" Pin Style 2-5/16" III III N/A N/A III III IV IV N/A N/A III III 2B Style 2B Style 4B Style 4B Style 2B Style 2B Style 3B Style 3B Style 4B Style 4B Style 2-1/4" OD x 1-3/4" ID, steel tubing 2-1/4" OD x 1-3/4" ID, steel tubing 2-1/4" OD x 1-3/4" ID, steel tubing 2-1/4" OD x 1-3/4" ID, steel tubing High-strength steel for 3" square or rectangular trailer tongue High-strength steel for 3" square or rectangular trailer tongue High-strength steel for 3" square or rectangular trailer tongue High-strength steel for 3" square or rectangular trailer tongue High-strength steel for 3" square or rectangular trailer tongue High-strength steel for 3" square or rectangular trailer tongue 8.0 8.0 8.0 8.0 10.5 10.5 11.5 11.5 12.0 12.0 10.5 10.5 10.0 9.0 12.0 12.0 13.0 13.0 14.0 14.0 16.0 16.0 N/A
no. 5 3 round straight tongue mount no. 6 Adjustable channel mount 7,000 lbs. 028390 u 3B6M 9.5" 12,500 lbs. 028630 u 4B6M 10" no. 8 A-Frame tongue mount 5,000 lbs. 7,000 lbs. 12,500 lbs. 15,000 lbs.
028384 u 028288 028386 u 028287 028463 u 028499 028656 028655 2B8H 2B8L 3B8H 3B8L 4B8H 4B8L 5B8H 5B8L
High Profile 2" Pin Style 2" High Profile 2" Pin Style 2" High Profile 2-5/16" Pin Style 2-5/16" 2" 2" 2" 2-5/16" 2" 2" 2" 2" 2-5/16" 2-5/16" 2-5/16" 2-5/16"
2B5H 16-1/4" High Profile 2B5M 16-1/4" Pin Style Pin Style Pin Style High Profile Low Profile High Profile Low Profile High Profile Low Profile High Profile Low Profile
2B Style High-strength steel for 3-1/2" OD round trailer tongue 2B Style High-strength steel for 3-1/2" OD round trailer tongue
IV 3B Style Fits inside 2-7/8" wide channel N/A 4B Style Fits inside 2-7/8" wide channel III III IV IV N/A N/A N/A N/A 2B Style 2B Style 3B Style 3B Style 4B Style 4B Style 5B Style 5B Style High-strength steel for 50 trailer tongue High-strength steel for 50 trailer tongue High-strength steel for 50 trailer tongue High-strength steel for 50 trailer tongue High-strength steel for 50 trailer tongue High-strength steel for 50 trailer tongue Black primed finish Black primed finish Kit includes high profile latch handle, latch wire, latch pin, push nut, and cotter pin.
Cast couplers
Gross Part No. Trailer Weight Overall Latches Length Ball Size SAE Description Class Unit Wt. Lbs.
Wedge-Latch cast head couplers 18" 8,000 lbs. 43805W0317 18" 12,500 lbs. 44125W0317 15,000 lbs.
44150W0317 44150WQ317 44150WH301 18" 18" 18"
Wedge-Latch Flat Mount cast head couplers N/A Wedge Latch 2-5/16" N/A 20,000 lbs. 4420000317 N/A Wedge Latch 2-5/16" N/A 25,000 lbs. 4425000317 ACCESSORY PART - Wedge-Latch FLAT MOUNT CAST HEAD COUPLER Wedge-Latch adjustable Height cast head couplers 8,000 lbs. 14,000 lbs.
A200C 0317 A2003C0317 A2005C0317 A256C 0317 A2563C0317 A2565C0317 8-1/2" 9-1/4" 9-1/4" 9-1/4" 9-1/2" 9-1/2" Wedge Latch Wedge Latch Wedge Latch Wedge Latch Wedge Latch Wedge Latch PL4 0201 N/A N/A N/A 2" 2" 2" 2-5/16" 2-5/16" 2-5/16" N/A IV IV IV IV IV IV
Wedge Latch Wedge Latch Wedge Latch Wedge Latch Wedge Latch
IV IV IV IV IV
Round jack mount, 50" A-frame Round jack mount, 50" A-frame Round jack mount, 50" A-frame Square jack mount, 50" A-frame Round jack mount, 50" A-frame, for bolt-on applications Cast head, 4-1/2" mount pattern, grey primer coat Cast head, 4-1/2" mount pattern, grey primer coat Pin/Lanyard 5/16" with 4 Link Chain & Tab Cast head includes mounting hardware, adjustable height Cast head includes bolts and 3-position channel, adjustable height Cast head includes bolts and 5-position channel, adjustable height Cast head includes mounting hardware, adjustable height Cast head includes bolts and 3-position channel, adjustable height Cast head includes bolts and 5-position channel, adjustable height
14.3 18.6 18.6 18.6 18.6 14.0 15.0 0.75 9.5 13.7 15.8 10.1 14.3 16.4 4.18 6.32 1.0 1.0
AC300 0300 8" Height N/A N/A N/A 4-hole, 3-position bracket, with 4" of vertical adjustment, adjustable height AC500 0300 11-3/4" Height N/A N/A N/A 6-hole, 5-position bracket, with 8" of vertical adjustment, adjustable height 66 0801 N/A N/A 2" N/A 2" Ball size Wedge-Latch repair kit. Includes latch lever, ball clamp, and replacement hardware 67 0801 N/A N/A 2-5/16" N/A 2-5/16" Ball size Wedge-Latch repair kit. Includes latch lever, ball clamp, and replacement hardware NOTE: Other custom-made designs are available upon request. u DENOTES MOST POPULAR
31
GooSeNecK coUPleRS
028900
0289600300
OTE: All Gooseneck Couplers are in N compliance with the SAE standard J2638 (see page 52 for details).
0289580300 0289590300
Failure to close coupler securely before towing or failure to use with specified ball size may result in serious injury or death.
WARNING
32
GooSeNecK coUPleRS
Unit Wt. Lbs.
round gooseneck fiXed coupler 20,000 lbs. 0287690300 33.00" N/A 2-5/16" round gooseneck adjustable coupler 20,000 lbs. 0287600300 29.20" 8.0" 2-5/16" 25,000 lbs. 30,000 lbs. gooseneck coupler head N/A 24,000 lbs. GN24 0200
0287610300 27.20" 0289250300 29.30" 0289500300 29.30" 8.0" 8.0" 8.0"
Fixed base coupler. Adjustable gooseneck coupler. Adjustable gooseneck coupler. No outer tube. 4.5" diameter outer tube, 4" diameter inner tube, with cast locking plates. 3/4" load bearing pin. 4.5" diameter outer tube, 4" diameter inner tube, with cast locking plates. 3/4" load bearing pin. Cast steel gooseneck coupler designed for easy welding to 3" or 4" diameter tubing. Quick and easy latching action eliminates need to be in tow vehicle for hook-up.
N/A 2-5/16"
replacement part - GOOSENECK COUPLER HEAD GN24 REPAIR KIT 1542S01 N/A N/A N/A Kit includes torsion spring, coupler locking shaft, curved handle assembly, 3/4" shaft retaining ring, N/A
N/A N/A N/A N/A centerlock nut 1/2-13
N/A
2-5/16" N/A
Kit includes coupler assembly, locking pin assembly, locking pin cover, bulldog label, and warning label. Replacement Pin Kit, includes cotter pin.
10.0 N/A
SQUARE gooseneck Adjustable coupler 40" 25,000 lbs. 0289600300 32" 30,000 lbs.
8" 2-5/16" 028900 32" 39" 7" 2-5/16" 0289800300 32" 40" 8" 2-5/16"
4.5" square outer tube, 4.0" square inner tube. (1) 3/4" diameter set screw. 4.5" square outer tube with .25" wall, 4.0" square inner tube with .313" wall. Includes topwind crank. 4.5" square outer tube with, 4.0" square inner tube. (2) 3/4"diameter set bolts.
US Patent 5,382,109
KINGPIN GOOSENECK COUPLER - ROUND TUBE 8" 25,000 lbs. 0289580300 23.3" 31.3" KINGPIN GOOSENECK COUPLER - SQUARE TUBE 8" 30,000 lbs. 0289590300 23.3" 31.3"
N/A N/A
Round tube, raw finish, labels shipped loose. Square tube, raw finish, labels shipped loose.
56.0 51.0
028351
Coupler Balls 3,000 lbs. 028375 5,000 lbs. 028351 u 7,000 lbs. 028352 12,500 lbs. 028400 u
2" with 3/4" shank 2" with 1" shank 2" with 1" shank (heat treated) 2-5/16" with 1-1/4" shank
33
STAmPed coUPleRS
Stamped CoUplerS
The most popular coupler mechanism ever developed, the Fas-Lok originated as a Fulton brand and is offered in a full line of SAE Class I through IV rated straight tongue stamped couplers. The Fas-Lok latching mechanism allows quick and easy trailer hook-up, and is factory adjusted for end user convenience.
22300
44314R
US Patent 6,505,849
34300
Stamped couplers
A-Frame
High-strength stamped couplers for 50-degree frames.
34
STAmPed coUPleRS
Packaging
Stamped couplers
Gross Part No. Trailer Weight Ball Size SAE Description Finish Class
handwheel couplers
308 0217 308 0317
5,000 lbs.
Coupler Accessories
CH 0701 Handi-Grip Coupler Handle
Couplers do not include hitch balls. Class III hardware couplers can be used on Class II trailers.
NOTE: Review price list or contact customer service for package quantities and full part number.
WARNING
Failure to close coupler securely before towing or failure to use with specified ball size may result in serious injury or death.
35
FOLD-AWAY COUPLERS
Replace existing couplers on trailers with 3500 lb. & 5000 lb. weight capacities Shortens trailer tongue by 34" Unique patented offset design Meets SAE J684 requirements Easy to install bolt-on application with complete instruction manual Includes all mounting hardware
SPace Saving!
Bolt-On
Weld-ON
36
FOLD-AWAY COUPLERS (CONSULT PIVOT RATING CHARTS ON PAGE 38 FOR ALLOWED CAPACITY)
Gross Part No. Trailer Weight Ball Size SAE Class Pivot Description Length
Includes Fold-Away hinges, mounting hardware, pivot bolt, pivot pin/clip, extension tube and coupler. Chains and torques bit included with retail display box packaged items.
FOLD-AWAY BOLT-ON HINGE KITS (CONSULT PIVOT RATING CHARTS ON PAGE 38 FOR ALLOWED CAPACITY)
Gross Part No. Trailer Weight Ball Size SAE Class Pivot Description Length Finish Packaging
Includes Fold-Away hinges, mounting hardware, pivot bolt, pivot pin/clip. Torques bit included with retail display box packaged items.
FOLD-AWAY WELD-ON HINGE KITS (CONSULT PIVOT RATING CHARTS ON PAGE 38 FOR ALLOWED CAPACITY)
Gross Part No. Trailer Weight Ball Size SAE Class Pivot Description Length Finish Packaging
Includes Fold-Away hinges (raw finish castings ideal for painting or galvanizing), zinc plated pivot bolt and nut, 5/8" diameter hitch pin and clip.
37
38
wiNcHeS
To Select T Winch Capacity: Minimum Winch Capacity = Maximum Weight of Boat, Including Motor, Fuel, Gear 2
Example: Boat, Motor, Fuel, Gear Weight = 2,800 lbs. 2,800 2 = 1,400 lbs.
XLT18
T3700
LiFTING
K2550
KW3000
Notes
1. Fulton Winches are not designed to be human hoists and should never be operated when there are persons on or under the load being moved. 2. Fulton Winches are rated on the first layer of recommended line on the drum. For maximum efficiency use only the amount of line required. Derate the capacity 10% per additional layer of rope, strap, or cable.
39
PREMIUM FINISH
Environmentally friendly Self-healing Maximum corrosion resistance Used in salt water environments and other demanding climate applications 1200 hour salt spray rating per ASTMB117
Easy Installation
F2 Two SPEED TRAILER WINCH
Capacity Part No. Gear Ratio Handle Length Strap
Adjustable Handle
5.1:1, 3.17:1
4 Position 6", 7", 8", 9" 20 x 2" Heavy Duty w/Hook YES 4 Position 6", 7", 8", 9" 20 x 2" Heavy Duty w/Hook YES
Sharkskin Sharkskin
15.7 15.7
Neutral
Low Speed
High Speed
40
PREMIUM FINISH
Environmentally friendly Self-healing Maximum corrosion resistance Used in salt water environments and other demanding climate applications 1200 hour salt spray rating per ASTMB117
4 Position 6", 7", 8", 9" 4 Position 6", 7", 8", 9"
Sharkskin Sharkskin
6.7 6.7
Easy Installation
Adjustable Handle
41
We manufacture a full line of Fulton brand single speed winches designed to meet your toughest pulling demands. Our winches feature efficient gear ratios, full-length drum bearings, oil-impregnated shaft bushings, and our Comfort Grip handle for ease of cranking. All gears are high-carbon steel for superb strength and long-term durability. Stamped carbon steel frames provide rigidity for gear alignment and longer cycle life. Zinc finishes provide excellent corrosion resistance in all environments. All models are designed for use with rope or strap. For end user convenience, most models are available with factory installed straps and hooks. Our XLT Series includes stylized polypropylene shell with strap and hook as standard features. The T1300 and T1500 models offer optional gear covers, gear train protection, and added styling like T1500ZC.
Compliant
XLT14
Winch Housing US Patent D407,883 Cover Plate US Patent D395,116
T1500ZC
T1602
T1100
42
900 lbs.
1,100 lbs. 1,300 lbs. 1,400 lbs. 1,500 lbs. 1,600 lbs.
All Cequent Performance Products single speed trailer winches are compliant. ** Maximum Mechanical Advance - Based on first layer of recommended line on the drum. For maximum efficiency, use only the amount of line required.
43
Our XLT series includes stylized polypropylene shell with strap and hook as standard features.
Compliant
T2005
T2605
T2605Z
44
2,000 lbs.
2,600 lbs.
3,200 lbs.
3,700 lbs.
The S version winches have a narrower drum to accommodate a 2" wide strap. All Cequent Performance Products two speed trailer winches are compliant. ** Maximum Mechanical Advance - Based on first layer of recommended line on the drum. For maximum efficiency, use only the amount of line required. *** Brake Kit 1619-01 available as option not furnished. Only winches that are shown to accommodate steel cable should be used with steel cable. Cable keeper kits are included with the winches specifying steel cable. Winches rated for steel cable have a larger drum hub to reduce or lessen chance of kinking or fraying. Notes: 1. Winch mounting hardware sold separately. Refer to instruction sheet for recommended bolt size and grade. 2. Fulton brand two-speed winches are designed for boat trailer and other pulling applications, which require the freewheeling feature of ratchet type winches. If moving loads requiring vertical lifting, or positive load control in both directions, choose a Fulton brake winch from page 47. 3. All Fulton brand winches are rated on the first layer of recommended rope, strap, or cable. The winch load capacity must be derated as additional layers are used. Derate the capacity 10% per additional layer of rope, strap, or cable. 4. Fulton brand winches are NOT designed to be human hoists and should never be operated when there are persons on, around, or under the load being moved.
45
BRAKE wiNcHeS
Brake WiNcheS
Fulton brand K-Series self-activating automatic brake winches hold the load securely when the crank handle is released. Typical applications include boat lifts, grain augers, manual fork lifts, retractable swing keels, dumpster lid lifts, and manual hoists. Drum hubs are 10 times the recommended cable size to maximize cable life. The KX series offer plated gear covers for improved gear train protection and a dual ratchet system.
Compliant
K2550
K650
KX1550
K1051
46
BRAKE wiNcHeS
Packaging
Brake Winches
Part No. Max. Rated Line Pull Max. Cable Size Data Free Cable (7 x19 Galvanized Aircraft Cable) Mechanical Data Wheel Included 1st Layer Full Drum Diameter Drum Storage Test Strength Gear Ratio Handle Length Drum Hub Dia.
brake Winches
K650 0101 K650 0301 K1051 0101 K1051 0301 KX10510101 KX10510301 K1550 0101 K1550 0301 KX15500101 KX15500301 KX20000301 K2550 0101 K2550 0301 600 lbs. 200 lbs. 272 kg 91 kg 600 lbs. 200 lbs. 272 kg 91 kg 1,000 lbs. 500 lbs. 454 kg 227 kg 1,000 lbs. 500 lbs. 454 kg 227 kg 1,000 lbs. 500 lbs. 454 kg 227 kg 1,000 lbs. 500 lbs. 454 kg 227 kg 1,500 lbs. 700 lbs. 680 kg 318 kg 1,500 lbs. 700 lbs. 680 kg 318 kg 1,500 lbs. 700 lbs. 680 kg 318 kg 1,500 lbs. 700 lbs. 680 kg 318 kg 2000 lbs. 900 kg 2,500 lbs. 1,500 lbs. 1134 kg 680 kg 2,500 lbs. 1,500 lbs. 1134 kg 680 kg 1/8" (3.2 mm) 1/8" (3.2 mm) 7/32" (5.5 mm) 7/32" (5.5 mm) 7/32" (5.5 mm) 7/32" (5.5 mm) 1/4" (6 mm) 1/4" (6 mm) 1/4" (6 mm) 1/4" (6 mm) 1/4" (6 mm) 5/16" (8 mm) 5/16" (8 mm) 85 ft. 2,000 lbs. 1:01 26 m 907 kg 85 ft. 2,000 lbs. 1:01 26 m 907 kg 50 ft. 5,600 lbs. 4.1:1 15 m 2540 kg 50 ft. 5,600 lbs. 4.1:1 15 m 2540 kg 50 ft. 5,600 lbs. 4.1:1 15 m 2540 kg 50 ft. 5,600 lbs. 4.1:1 15 m 2540 kg 70 ft. 7,000 lbs. 5.1:1 21 m 3175 kg 70 ft. 7,000 lbs. 5.1:1 21 m 3175 kg 70 ft. 7,000 lbs. 5.1:1 21 m 3175 kg 70 ft. 7,000 lbs. 5.1:1 21 m 3175 kg 75 ft. 4.1:1 22.5 m 70 ft. 9,800 lbs. 15.8:1 21 m 4445 kg 70 ft. 9,800 lbs. 15.8:1 21 m 4445 kg 11" 1-1/4" NO NO 27.9 cm 32 mm 11" 1-1/4" NO NO 27.9 cm 32 mm 11" 2-1/4" NO NO 27.9 cm 57 mm 11" 2-1/4" NO NO 27.9 cm 57 mm 11" 2-1/4" NO NO 27.9 cm 57 mm 11" 2-1/4" NO NO 27.9 cm 57 mm 11" 2-1/2" NO NO 27.9 cm 63 mm 11" 2-1/2" NO NO 27.9 cm 63 mm 11" 2-1/2" NO NO 27.9 cm 63 mm 11" 2-1/2" NO NO 27.9 cm 63 mm 11" 2" NO NO 27.9 cm 11" 3-1/8" NO NO 27.9 cm 79 mm 11" 3-1/8" NO NO 27.9 cm 79 mm Litho Box Bulk Litho Box Bulk Ind. Box Bulk Litho Box Bulk Ind. Box Bulk Bulk Litho Box Bulk
Only winches that are shown to accommodate steel cable should be used with steel cable. Cable keeper kits are included with the winches specifying steel cable. Winches rated for steel cable have a larger drum hub to reduce or lessen chance of kinking or fraying. All Cequent Performance Products brake winches are compliant.
Dimensional information
D C E A B
Notes: 1. Fulton brand brake winches meet ASAE S361:3 standards (with the exception of the KX2000). 2. Winch mounting hardware sold separately. Refer to instruction sheet for recommended bolt size and grade. 3. All Fulton brand winches are rated on the first layer of recommended rope, strap, or cable. The winch must be derated as additional layers are used. Derate the capacity 10% per additional layer of rope, strap, or cable. 4. Fulton brand winches are NOT designed to be human hoists and should never be operated when there are persons on, around, or under the load being moved. E 2.94" 1.90" 2.46" 2.08" F 11.00" 11.00" 11.00" 11.00"
47
KW20000103 KW30000103
Regular drum 31:1 115 Handle drive (35 m) Regular drum 41:1 235 Handle drive (71 m) Regular drum 51:1 Drive ring and handle
8" handle (20.3 cm) 8" handle (20.3 cm) Drive ring 10" handle (25.4 cm)
Notes: 1. Winch mounting hardware sold separately. Refer to instruction sheet for recommended bolt size and grade. 2. All Fulton brand winches are rated on the first layer of recommended rope, strap, or cable. The winch must be derated as additional layers are used. Derate the capacity 10% per additional layer of rope, strap, or cable. 3. Fulton brand winches are NOT designed to be human hoists and should never be operated when there are persons on, around, or under the load being moved.
48
wiNcH ACCESSORIES
WS20 / WSP12
WC325
WS20HD0600
WINCH accessories
Part No. Description Packaging
WINCH Accessories
WS20 0200 WS20 0700 WSP12 0100 WSP12 0200 WSP12D0200 WS20HD0200 WS20HD0600 WC325 0100 WC750 0100 Winch Strap and Hook - Nylon web winch strap with hook, 2" x 20, 2,600 lb. maximum working load Winch Strap and Hook - Nylon web winch strap with hook, 2" x 20, 2,600 lb. maximum working load Personal Watercraft Winch Strap with Hook and Loop - includes loop Nylon web winch strap with hook, 2" x 12, 1,800 lb. maximum working load Personal Watercraft Winch Strap with Hook and Loop - includes loop Nylon web winch strap with hook, 2" x 12, 1,800 lb. maximum working load Personal Watercraft Winch Strap with Hook and Loop - includes loop Nylon web winch strap with hook, 2" x 12, 1,800 lb. maximum working load Heavy Duty Winch Strap and Hook - 2" x 20, 10,000 lb. minimum breaking strength, 4,000 lb. maximum working load Heavy Duty Winch Strap and Hook - 2" x 20, 10,000 lb. minimum breaking strength, 4,000 lb. maximum working load Winch Cable and Hook - 3/16" x 25 galvanized cable, 4,200 lb. breaking strength Winch Cable and Hook - 7/32" x 50 galvanized cable, 5,600 lb. breaking strength Bulk Clam Shell Clam Shell Bulk Counter Display Box Bulk Clam Shell Clam Shell Clam Shell
49
TRAileR AcceSSoRieS
Easy bolt-on installation, no cutting or drilling required. Fits trailer tongue up to 3" wide by 5" high. All mounting hardware and instructions included.
Packaging
Includes zinc-plated mounting hardware and instructions. Security locking hole to lock wheel and bracket to trailer using a security cable and lock (cable and lock sold separately).
Packaging
Includes lug nuts to secure wheel to frame. Heavy-duty 1/2" diameter construction. Zinc-plated to resist corrosion.
Packaging
ETC
ETCLB
ETCHL
Removable plug allows longer wheel studs to protrude through cap. Locking tab provides positive locking feature to prevent lock from turning.
Packaging
ETCSTL
50
TRAileR AcceSSoRieS
Designed to mount on 2" to 4" trailer frames Supports cable locks Includes spare tire mounting hardware Limited 5-year warranty
Finish Packaging
Designed to mount on 3" to 5" trailer frames Supports cable locks Includes spare tire mounting hardware Limited 5-year warranty
Finish Packaging
Works with 5, 6 and 8 bolt rims Designed to mount on 3" to 5" trailer frames Supports cable locks Includes spare tire mounting hardware Limited 5-year warranty
Finish Packaging
Designed to mount on 2" to 4" trailer frames Supports cable locks Includes spare tire mounting hardware Limited 5-year warranty
Finish
Packaging
51
NEW SAE The SAE INterNatioNal J2638 StaNdard STAND ARD for GooSeNeck aNd 5th Wheel TrailerS UNder 30,000 lbS.
The Society of Automotive Engineers (SAE) is a non-profit educational and scientific organization dedicated to advancing mobility technology to better serve humanity. SAE has developed many standards, testing methods and procedures to measure the performance of vehicles and vehicle related products, including trailers. SAE J2638 addresses both gooseneck and 5th wheel trailers under 30,000 lbs. The testing methods for gooseneck are as follows: TESTING METHODS STATIC TESTING is a one time maximum load requirement for the three test conditions. The test is to be maintained for 5 Seconds. Vertical - tests the goosenecks ability with upward and downward pressure - 85% of GVW Pull Out (25K lb Gooseneck = 21,250 lbs) - 50% of GVW Down (25K lb Gooseneck = 12,500 lbs) Longitudinal - tests the goosenecks ability with front and back pressure - 75% of GVW Front and Back (25K lb Gooseneck = 18,750 lbs) Transverse - tests the goosenecks ability with side to side pressure - 30% of GVW Each Side (25K lb Gooseneck = 7,500 lbs) DYNAMIC TESTING defines requirements for repetitive testing in the three test conditions. 300,000 Cycles in each test condition. (Vertical, Longitudinal and Transverse) The same unit is used for all three tests. (900,000 Cycles all together) The range of load requirements are based on GVW and Rated Coupler Load. Longitudinal Transverse In order to assure safety and accountability for the products produced, SAE J2638 also requires: Product Identification - Manufacturers Name - Maximum Trailer GVW - Rated Vertical Coupler Load - Ball Size Testing - Products are to be fixtured at the maximum stress conditions - There should be no loss of attachment during testing - When testing is completed, the coupler will be capable of being uncoupled and coupled CEQUENT COmmITmENT As the leading manufacturer of gooseneck couplers, Cequent understands the importance of the new SAE standard for Goosenecks and 5th Wheels. We are committed to providing products that meet or exceed these recommendations and our commitment is evident by our investment in people and facilities dedicated to testing our products. Competitors 25K gooseneck fails longitudinal test at 11,500 lbs. In addition to being one of the only manufacturers with dedicated testing facilities, Cequent also has over 90 years of manufacturing experience to insure our products are of the highest quality and reliability. Because of the size of our organization we can provide the added benefits of high quality, unmatched reliability and proven strength, at a competitive price.
Vertical
52
Technical
Weld-On Bracket Mounting Positions, F2 Jack
Mounting Position For 3x5 Tube Mounting Position For 3x4 Tube
Rev. 2008
53
Technical
Adjusting the Swivel Mount Height, F2 Jack
Required Tools: NOTE:
3/4 Socket, Ratchet Wrench, 5/16 Hex minimum 2 (3/8 or 1/2 inch drive), Torque wrench.
It is essential that a square engagement be achieved when inserting the hex wrench into the socket head cap screw on the slide block. 6. Remove the nut from the back of the swivel mount.
Final Steps:
11. Replace the swivel mount making sure that the washer is still in place.
11
12 7
8. Loosen the socket head cap screw with the 5/16 hex wrench. 13. Re-torque the nut on the back of the swivel mount to 60 ft-lbs.
13 8
9. Adjust the mount height. 10. Re-torque the socket head cap screw to 60 ft-lbs. 14. You are now ready to enjoy your Fulton F2 Jack.
3 4 5
4 10
Rev. 2008
54
Technical
55
Technical
56
Technical
57
NOTES
58
LIMITED WARRANTY
For a complete copy of the Limited Warranty that applies to any specific product for the above listed brand names (including all applicable damage limitations) please contact our Customer Service Team.
CEQUENT PERFORMANCE PRODUCTS, INC. 47774 ANCHOR COURT WEST, PLYMOUTH, MI 48170 WWW.CEQUENTGROUP.COM FAX 800|249|3827 CUSTOMER SERVICE: 800|632|3290 TOWING DIVISION, US 800|565|0351 TOWING DIVISION, CANADA 800|786|7968 ELECTRICAL DIVISION 877|208|2548 TRAILER DIVISION
PRINTED IN THE USA P/N 98299, REV. C, 05/10, 2010 CEQUENT PERFORMANCE PRODUCTS, INC.