Beruflich Dokumente
Kultur Dokumente
DESCRIPTION BECKOSOL AQ 400 is a short oil alkyd latex based on a bio-renewable oil specifically designed for road marking paint. BECKOSOL AQ 400 requires no coalescing solvent for film formation and is free of alkyl phenol ethoxylates. APPLICATIONS Traffic paint Zone and curb marking paint
FEATURES Supplied at zero VOC Shear stable polymer suitable for use in high-speed pigment dispersions
TYPICAL PROPERTIES Appearance Percent Solids by Weight Percent Solids by Volume, Calculated Viscosity, Brookfield, 50 RPM, #3 spindle Pounds per Gallon Pounds per Gallon, Solids, Calculated pH Odor Volatile Content (Percent) STORAGE Store in a cool, dry place, preferably under 80 F to ensure a useful shelf life of at least six months. SAFETY Read the BECKOSOL AQ 400 Material Safety Data Sheet before handling, storing or using this product. Milky white 50-52 47.4 100-1000 cps 8.95 9.54 7.0-8.0 Mild Water, Ammonia (49.0, Trace)
1 2 3 4
6 7
Suppliers
1 2 3 4 5 6 7 Byk Chemie BASF DuPont Imerys OMG Ashland Dow
Formulation Physicals
Non-Volatile by Weight Non-volatile by Volume Pigment Volume Concentration Pigment to Binder Weight Ratio VOC (g/L) VOC (g/L) with Methanol as shown Pounds per Gallon pH Viscosity, Stormer, KU Freeze-Thaw, cycles passed 76.8% 60.0% 60.4% 3.79:1 0.0 75.0 13.89 8.1-8.7 85-95 5
BECKOSOL AQ 400
Page 2
TYPICAL COATINGS PERFORMANCE Formulation 4748-50-1 is offered as a starting point. This paint formulation will consistently dry to notrack in less than 25 minutes at 75 F and 50% rela tive humidity. This experimental polymer and formulation have not been tested for performance on road tests with live traffic.
TEST
Abrasion Resistance (Falling Sand) Bleed Ratio
METHOD
ASTM D 968
REQUIREMENTS
TT-P-115F/ 35 liters TT-P-1952E/ 150 liters 0.90 min TT-P-115F Type 1 / 30 minutes TT-P-1952E / 10 minutes Mandrel
ASTM D 969
0.98 min
Dry-No-Pickup
ASTM D 711
20 minutes
Flexibility
TT-P-115F
Pass
Freeze-Thaw Resistance
ASTM D 2243
TT-P-1952E / 3 cycles
5 cycles
Dry Opacity
TT-P-1952E
0.92 min
Scrub Resistance
ASTM D 2486
Water Resistance
TT-P-1952E
Pass
Pass
85 KU
75 g/L
BECKOSOL AQ 400
Page 3
Formulation Option 2
Raw Material Grind BECKOSOL AQ 400 Water Natrasol 250 HBR-15% Solution 28% Ammonia Disperbyk 190 Foamstar A10 Ti-Pure R-900 Drikalite High speed disperse to 3+ Hegman grind Attagel 50 Continue high speed dispersion for an additional 3-5 minutes, then recheck grind Grind Total Letdown Fe, 0.09% Borchi Oxi Coat 1101 Methanol (optional) ** Foamstar A10 427.25 60.17 3.75 0.25 12.53 3.00 100.00 735.14 3.00 47.74 7.22 0.43 0.03 1.42 0.42 3.00 32.67 0.15 #/100 Gal/100 Supplier
2 3 4 5 3
1345.09
92.66
4.27 0.51 (41.52) (6.26) 0.14 1.00 1391.88 100.00 Total **The methanol is added to provide this formula with freeze/thaw stability.
Suppliers
1 2 3 4 5 6 Ashland Byk Chemie BASF DuPont Imerys OMG
Formulation Physicals
Non-Volatile by Weight Non-volatile by Volume Pigment Volume Concentration Pigment to Binder Weight Ratio VOC (g/L) VOC (g/L) with Methanol, as shown Pounds per Gallon pH Viscosity, Stormer, KU
BECKOSOL AQ 400
Page 4
1 2 3 4
5 3
Suppliers
1 2 3 4 5 6 Ashland Byk Chemie BASF DuPont Imerys OMG
Formulation Physicals
Non-Volatile by Weight Non-volatile by Volume Pigment Volume Concentration Pigment to Binder Weight Ratio VOC (g/L) VOC (g/L) with Methanol, as shown Pounds per Gallon pH Viscosity, Stormer, KU
BECKOSOL AQ 400
Page 5
Raw Material
Supplier
Water Natrasol 250 HBR 28% Ammonia Disperbyk 190 FoamStar A10 Yellow 65
High speed disperse, then place on shot mill for 20 minutes or until 7+ Hegman Total
1 2 3
951.38
100.00
Suppliers
1 2 3 Ashland Byk Chemie BASF
Formulation Physicals VOC , g/l NV, Weight NV, Volume WPG % Pigment
0.00 41.9% 33.7% 9.51 40
BECKOSOL AQ 400
Page 6