Beruflich Dokumente
Kultur Dokumente
Dear Madam/Sir, all index entries and cross-references in this catalog have been laid out as hyperlinks to help you get to the required product or information as quickly as possible. There is a grey button labelled Table of Contents on top of each page which takes you back to the Table of Contents immediately. We offer you the following search options: - Applications Overview (page 4/5) - Table of Contents (page 6) - Type Index (page 111) Enjoy browsing through our new GOSSEN METRAWATT catalog 2013/2014!
go to T&M Catalog
Measuring Instruments
and Testers
20
13
/2
01
E DITORIAL
Dear reader, Thank you for your interest in our products and services covering all aspects of measuring and test technology. Our product range is distinguished by values such as quality, reliability, safety and advanced technology, as well as dynamic design, extremely easy operation and a unique innovative spirit. After all, our measuring and test technology expertise is built into each of our products and has been for more than 100 years. Again and again, users tell us that measuring and test systems from Gossen-Metrawatt are safe, reliable and economic, and were very pleased to hear it because this is precisely what we strive to accomplish, and thats what differentiates us from the competition. And were self-assured enough to go one step further as well: Gossen-Metrawatt stands for reliability and competence in measuring and test technology. Were ready to meet the challenges of future market developments with attractive new products, as well as services, consultation, project engineering, training and on-site assistance. You get support and competent, personalized advice. This is your guarantee of a customer-oriented sales network with highly qualied sales engineers. Weve grown together with you over a period of many decades, and have always striven to align ourselves to you requirements You can count on us!
Ma
de
in G er m
an
GOSSEN METRAWATT
MEasURING CatEGORIEs
IEC 61010-1
CAT II
CAT IV
CAT I
CAT CAT I (0)* CAT II CAT III CAT IV
* Per DIN EN 61010-2-030
CAT III
Description Measurements in electrical circuits which are not directly connected to the mains Measurements in electrical circuits which are directly connected to the low-voltage mains Measurements in building installations Measurements at power sources for low-voltage installations e.g. batteries etc. via plug, e.g. in household, office and laboratory applications Stationary consumers, distributor terminals, devices connected permanently to the distributor Meters, mains terminals, primary overvoltage protection devices Applications
With regard to multimeters and test instruments, the CE declaration of conformity conrms that European regulations (low-voltage directive and EMC directive) are adhered to.The CE declaration is a prerequisite for putting products into circulation within the European Community. Adherence is substantiated by fullling the following standards: IEC61010-1 (international), EN61010-1 (German version) and VDE classication VDE0411-1.
Safety requirements for electrical equipment for measurement, control and laboratory use are described in this standard. Currently valid safety regulations include: IEC 61010-1:2010 + Cor.:2011 DIN EN 61010-1:2010 VDE 0411-1:2011
in de
Ma
Germ a
ny
GOSSEN METRAWATT
APPLIcatIONs: Overview
Medical Technology
n SEcULiFE (+accEssORiEs)............ 77
n SEcUtEst n SECULIFE
n SEcUTEST S2N+W...........................75 n SEcUstaR FM+................................78 n SEcULOad....................................... 84 n 3-Phase adapters............................ 84 n METRAHIT ENERGY...........................13 n METRAHIT ISO..................................14
Mining Engineering: n PROFitEst Master.......................... 46 n METRAHIT World IS (South Africa)...15 n Rotation angle measurement technology
Automotive/eMobility R&D, Test&Production Departments: n Laboratory power supplies..............95 n METRAport 40S (VAG1526)...............16 n METRAHIT H+ E CAR........................21 n Current clamps............................... 28 n PROFitEst Master.......................... 46 n SEcUtEst (+accessories).............. 75 n Energy management systems............ *
in de
Ma
Germ a
ny
GOSSEN METRAWATT
APPLIcatIONs: Overview
Tooling Expenditures
n MiNitEst..........................................80 n SEcUtEst (+accessories)...............75
technology......................................... *
Machinery Manufacturing:
n PROFitEst 204................................ 60 n MEtRisO 5000 (A, D-PI).................. 54 n Phase sequence indicators............. 66 n Controllers and control systems........ * n METRAHIT 1ASI................................19 n METRAHIT ENERGY...........................13 n MavOWatt/MavOLOg*.................. 38 n Process measuring technology......... * n Rotation angle measurement technology
Electrical Trades: n MavOWatt.......................................38 n PROFitEst Master...........................46 n Voltage testers................................ 66 n Insulation measuring instruments.. 51 n Earth testers....................................56 n PV module measuring instruments. 62 n Current clamps................................28 n SEcUtEst (+accessories)...............75 n METRAHIT PRO.................................10 n MiNitEst..........................................80 n MEtRatEstER 5...............................79 n Test panels...................................... 81
*Camille Bauer
Further information regarding products for the elds of heavy-current engineering, rotation angle measurement and process metrology can be found in the catalogs issued by Camille Bauer AG, or at: www.camillebauer.com and www.gossenmetrawatt.com
in de
Textiles
n OEM KONSTANTER.........................106
Ma
Germ a
ny
GOSSEN METRAWATT
TaBLE OF CONtENts
DIN VDE 0113/EN 60204........................................................ 60 Testers electrical equipment 63 Accessories............................................................................. 61 DIN VDE 0701-0702IEC62353 (VDE 0751)............................ 64 Photovoltaics .............................................................. 62 Medical technology and production........................................... 65 METRALINE............................................................................. 64 Facility management solution modular test system. . ................ 66 METRATHERM......................................................................... 65 Overview................................................................................. 67 Phase Sequence Indicators /Voltage Testers.............................. 66 DIN VDE 0701-0702. . .............................................................. 68 Current Clamp Meters.............................................................. 68 DIN VDE 0701-07023-phase testers. . .................................... 69 Overview of Accessories........................................................... 70 Accessories. . ........................................................................... 71 High-Voltage Transformers........................................................ 71 Accessories DIN VDE 0701-0702........................................... 72
TEstERs.......................................................... 73
Accessories............................................................................. 45
Software Equipment. test instruments Electrical Safety of .................................................. 77 74 Test Cases, Workshop Test Panels. ............................................ 81 Software for test instruments. ................................................... 78 Accessories:............................................................................ 82 Adapters, Cables..................................................................... 83 Laboratory power supplies 83 Sensors. .................................................................................. 86 Pouches, Cases....................................................................... 87 Computer controlled laboratory power supplies: Identification Accessories......................................................... 88 SYSKONP series...................................................................... 84 SYSKON 1500W...4500W........................................................ 85 SOFtwaRETEstERs..................................... 89 SSP 120W...320W.................................................................. 86 SSP 500W...3000W................................................................ 87 LaBORatORY POwER SUPPLIEs.95 KONSTANTER MSP 2x24W...120W.............................................................. 88 Analog laboratory power supplies: Programmable Laboratory Power Supplies: SLP 120W...320W and LSP 25W+25W+35W........................ 89 1500Wto4500W. ................................................................... 96 LSP 33K, LSP 32K and SSL 32EL............................................. 90 120Wto320W. ....................................................................... 98 Remote software. ..................................................................... 91 500Wto3000W. ..................................................................... 99 Overview of all KONSTANTERs. .................................................. 92 24W/49W/120W, up to 8 Channels. .................................... 100 Overview of laboratory power supplies and accessories.............. 93 90Wto108W. ....................................................................... 101 Laboratory power supplies: OEM product overview..................... 94 Analog Controlled Laboratory Power Supplies: 120W to 320W.101 Programmable Electronic Loads: 150Wto400W..................... 102 Software ............................................................................... 103 Photometry and temperature measurement 95 Laboratory Power Supplies: Overview and Accessories............. 104 Illuminance meters. .................................................................. 96 Power Supplies: OEM Product Overview.................................. 106 Luminance meters................................................................... 97 Infrared thermometers.............................................................. 98
Illuminance Meters................................................................. 108 Luminance Meter Contact Measurement.............................. 109 Luminance Meter Distance Measurement............................. 110
PHOtOmEtRY................................................ 107
New! GMC-I app: VDE testing made easy! Terminology, standards, publications Product overview and much more The latest news from GMC-I? Visit us at Facebook.
Ma
in de
Germ a
ny
GOSSEN METRAWATT
Table of Contents
MULTImETERS
MULTIMETERS
A multimeter is an electronic measuring instrument that combines several measurement functions into a single unit, and is used primarily to measure electrical quantities. To measure means to compare a known quantity with an unknown quantity. The standards of measure of the PTB in Brunswick (German Federal Institute of Physics and Metrology) are used as comparative quantities for our multimeters This is conrmed by means of a DAkkS calibration certicate. Multimeters included in the MEtRaHit series are rugged, reliable digital multimeters with housings made of impact resistant plastic, and are equipped with unique, patented automatic blocking sockets (ABS). The devices feature a new design and are equipped with state-ofthe-art technology and safety.
GOSSEN METRAWATT
Table of Contents
Symbol
Meaning
ABS RANGE
AUTO/MAN
Automatic blocking sockets Measuring range selection, automatic/manual Connector jack for external power pack Battery display Battery charge level indicator
TRMS
AC
True root mean square (TRMS) for alternating quantities TRMS for alternating and pulsating quantities TRMS for alternating quantities up to 100 kHz Measuring category / overvoltage category Storage of min./max. measured values Data logger function Infrared data interface Bluetooth data interface
TRMS
AC+DC
100 kHz
TRMS
300 V
CAT IV
Battery operation Measurement of alternating, direct and pulsating voltage Measurement of alternating, direct and pulsating current Activatible low-pass lter AC voltage measurement with low input impedance (prevents measurement of phantom voltage) Temperature measurement by means of thermocouples and resistance temperature detectors
DATA
Min-Max
DATA LOGGER
IR
FIL
1 kHz
60,000
1 M
LoV
Digits
0000 0000
00000
Ma
in de
Germ a
ny
GOSSEN METRAWATT
Table of Contents
Symbol
Meaning Continuity test with acoustic signal CLIP factor (adjustable transformation ratio for interconnected current clips) Highest resistance measuring range Frequency measurement up into the MHz range Duty cycle Voltage level measurement in decibels RPM measurement Capacitance measurement Diode test IP 65 protection Additional, virtual analog display Automatic circuit breaker USB Port
Symbol
RS 232
Meaning Serial port LED display LCD panel Mains operation Acoustic signals Kelvin connection (4-wire)
CLIP 40 M
LED LCD
MHz % dB
Power Pack
RPM
Ri
IP 65
Clip
Factor
Bar Graph
AUTO Fuse
Ri
dB
Differential level measurement Measurement data acquisition software Data storage Power quality measurement Active power measurement Accuracy class (e.g. 20% of MR)
in de
Software
TouchScreen
Memory
Rs
Low
PQ W
Class
2.5
Ma
Germ a
ny
GOSSEN METRAWATT
10
Table of Contents
A
A Series TRMS TRMS
AC
AC+DC
4 Digit TRMS Digital Multimeter for Professional Use with a Resolution of 12,000 Counts
n DAkkS calibration certicate Scope of delivery, A series: n KS17-2 measurement cable set n R ubber holster n Two 1.5V AA batteries (XTRA only) nS et MEtRaHITIPro (M242D):
600 V 1000 V
CAT IV CAT III
D-K1508001-01
RANGE
AUTO/MAN
40 M
ABS
DATA
Bar Graph Min-Max
METRAHITIBASE
Article: M241A Multimeter with high-impedance measuring inputs without direct measurement of current, e.g. for use in the eld of energy technology at power utilities
METRAHITIPRO
Article: M242A Multimeter with low-pass lter and low-impedance voltage input, e.g. for measurements at frequency converters
METRAHITITECH
Article: M243A Multimeter with optimized current ranges, e.g. for measurements at measuring transducers in the process industry
METRAHITIXTRA
Article: M240A System multimeter with data logger, IR interface and power pack socket for use in combination with PCs
Function
Clip function Frequency measurement Duty cycle Temperature Power pack connector socket IR interface Data logger LO voltage with low-pass lter Rubber holster HC 20 case TRMS bandwidth (VAC) TRMS current measurement Capacitance measurement Resolution
in de
BASE
n
PRO
TECH
n
XTRA
100kHz TC
n
100kHz TC
n
1MHz
n
TC/RTD
n n n n n
20kHz 100A...10A
n
12,000
12,000
Ma
Germ a
ny
GOSSEN METRAWATT
Table of Contents
11
E
E Series TRMS
AC
AC+DC
4 Digit High-End TRMS Digital Multimeter, System Compatible with IR Interface Resolution: 60,000 Counts Scope of delivery, E series:
n KS17-2 measurement cable set n Two 1.5 V AA batteries n DAkkS calibration certicate n Rubber holster n Set with HC20 hard case
AUTO/MAN
60 M
ABS
D-K1508001-01
DATA
Bar Graph Min-Max
IR
METRAHITIEBASE
Article: M251A Same applications as BASE but with higher resolution and system interface
METRAHITIESPECIAL
Article: M252A Special multimeter for connection to current transformers without fuses, in order to eliminate danger resulting from interruption of the transformer circuits
METRAHITIETECH
Article: M253A Same applications as TECH but with higher resolution and system compatible thanks to IR interface
METRAHITIEXTRA
Article: M250A Same as XTRA with larger data memory, higher resolution and VAC bandwidth up to 100kHz
EBase
n
ESPECIAL
n
ETECH
n
EXTRA
n
Function
Clip function Frequency measurement Duty cycle Temperature Power pack connector socket IR Interface Data logger LO voltage with low-pass lter Rubber holster HC 20 case TRMS bandwidth (VAC) TRMS current measurement Capacitance measurement Resolution
in de
300kHz TC
n
300kHz TC
n
300kHz TC/RTD
n
1MHz
n
TC/RTD
n n n n n n
n n
n n n
n n n
1kHz 60,000
60,000
60,000
Ma
Germ a
ny
GOSSEN METRAWATT
12
Table of Contents
METRAHITIOUTDOOR
Article: M2400 The OUTDOOR multimeter has been specially designed and manufactured to meet the challenges faced by engineers and technicians in adverse environments. Its extremely rugged, impact-resistant, water-proof and dust-proof, and is resistant to extreme temperatures. Technology and scope of functions are the same as with the MetraHITIXtra
nS pecial rugged design with shock and impact nA dditional rubber holster nS pecial sand color nD ust-proof /water jets per IP 65 nP atented, sealed blocking sockets nP lus additional functions as included with the MEtRaHITIXtra
resistant housing
Scope of delivery: nK S17-2 measurement cable set nR ubber holster n Two 1.5V AA batteries n DAkkS calibration certicate
CAT IV
CAT III
Min-Max AUTO/MAN
DATA LOGGER
IR
IP 65 MHz
12,000
Counts
AC, DC, AC+DC
Bar Graph
ABS FIL
1 kHz 1 M
LoV
METRAHITI30M
Article: M230B
6 Digit Precision TRMS Multimeter, Temperature Measuring Instrument and Data Logger for Demanding, Universal Applications in the Lab and for Service Calls
nD isplay: 1,200,000 counts nI ntrinsic error: (35ppm
data memory, sampling interval: 0.1 s to 10min. n Mains power pack (optional) nC AT II at 600V per IEC 61010-1 Scope of delivery: KS17-2 measurement cable set n nR ubber holster n Two 1.5V AA batteries n DAkkS calibration certicate
of the measured value +70ppm) nR esistance and temperature measurement with 4-wire Kelvin connection nM in-Max measured value storage nA utomatic range selection and battery cutoff TRMS TRMS
AC+DC DC, AC+DC
DC, AC+DC
12 M
kHz RANGE
AUTO/MAN
IR
Ma
in de
Germ a
ny
GOSSEN METRAWATT
Table of Contents
13
METRAHITIENERGY
Article: M249A Multimeter with power and energy measurement, e.g. for ascertaining energy consumption in standby mode for consumer electronics, communications and IT devices, as well as household appliances such as refrigerators etc., plus a single-phase mains quality measuring instrument (power quality tool). Scope of delivery:
nK S29 measurement cable set nR ubber holster n Two 1.5V AA batteries n DAkkS calibration certicate
CAT IV
CAT III
DATA
Min-Max AUTO/MAN
DATA LOGGER
IR
60,000
0000 0000
Digits 00000
AC, DC, AC+DC
ABS FIL
1kHz 1 M
LoV
MHz
dB
RPM
PQ
METRAHITIULTRA
Article: M248A / M248B (Bluetooth) Handheld digital multimeter with TRMS measurement with, amongst other measuring functions: V AC TRMS, V AC+DC TRMS, V DC, A AC TRMS, A AC+DC TRMS, A DC dB, Hz(V), Hz(A), V , C / F (TC/RTD)
nR esolution of 310,000 digits, triple display,
Scope of delivery:
nK S17-2 cable set in nR ubber holster nC ondensed operating instructions,
English/German
nC D ROM with operating instructions in
display illumination can be activated under difficult lighting conditions nM easurement data memory for up to 300,000 measured values nI nstrument can be remote controlled via Bluetooth interface (device variant M248B only) TRMS TRMS TRMS 300 V 600 V
AC
AC+DC 100 kHz
English and German, as well as other available languages n Two 1.5V AA batteries n DAkkS calibration certicate Freeware App for smartphone or tablet with AndroidTM for the Bluetooth variant DATA
Min-Max
CAT IV
DATA LOGGER
310,000
0000 0000
Digits 00000
AC, DC, AC+DC
ABS FIL
1kHz
RANGE
30 M
AUTO/MAN
TC/ RTD IR
D-K1508001-01
MHz
dB
Ma
in de
Germ a
ny
GOSSEN METRAWATT
14
Table of Contents
METRAHITIISo
Article: M246B
4 Digit Multimeter and Insulation Tester for Service Applications for Measuring and Testing Industrial Trucks, Household Appliances and other Applications Resolution: 30,000 Digits 26Multimeter Functions
n1 kHz low-pass lter can be activated for nD ata logger function with 512kB data memory
measurement of V AC nC urrent measurement: bandwidth up to 2kHz nV oltage measurement: bandwidth up to 10kHz n I nsulation resistance measurement with adjustable test voltage (50,100,250, 500 or 1000V) and detection of interference voltage TRMS TRMS 600V
AC
AC+DC
for up to 15,400 measured values Scope of delivery: n KS17-2 measurement cable set n Two 1.5 V AA batteries n DAkkS calibration certicate
CAT III
1000V
CAT II
DATA LOGGER
300 k
METRAHITIT-Com/T-COM PLUS
3 Digit Telecommunications Multimeter for Measurements in Symmetrical Copper Cable Networks System Compatible with Data Memory and IR Interface 22 or 25 Multimeter Functions
n Insulation resistance measurement n Measurement of cable length with adjustable
(T-COM test voltage: 100V, T-COM plus: 10 V/100V) n Detection of interference voltage and polarity reversal n Cable symmetry testing by means of rapid terminal switching: a b E n 200Hz low-pass lter can be activated for measurement of V AC n Analog display, linear or logarithmic for insulation measurement TRMS TRMS 600 V 300 V
AC
AC+DC
AC, DC, AC+DC
cable parameters
nL ow-resistance measurement (cable loops) RSL
Scope of delivery: n KS21-T measurement cable set n Two 1.5V AA batteries n DAkkS calibration certicate
CAT II
CAT III
DATA LOGGER
30 kH
Ma
Germ a
ny
GOSSEN METRAWATT
Table of Contents
15
METRAHITI2+
Article: M205A
36/7 Digit Universal TRMS Digital Multimeter with Analog Scale for Use in All Areas of Electrical Engineering TRMS
AC
D-K1508001-01
TRMS 600 V TC
1 kHz
CAT III
DATA
Min-Max
6..000
Counts
Bar Graph
ABS
RANGE
AUTO/MAN
AC, DC
AC, DC
40 M
Scope of delivery: n KS17-ONE measurement cable set n Two 1.5V AA batteries n Rubber holster n DAkkS calibration certicate
METRAHITIWORLD
Article: M206A
36/7 Digit Universal Digital Multimeter with Analog Scale for Use in All Areas of Electrical Engineering, especially at the International Level
TRMS
AC
40 M
Digits
6000
CAT IV
CAT III
RANGE
AC, DC,
AUTO/MAN
Hz DATA
Bar Graph Min-Max
%
D-K1508001-01
RPM
AC, DC,
IR
Scope of delivery: n KS17-2 measurement cable set n Two 1.5V AA batteries n Rubber holster n DAkkS calibration certicate
ABS
Scope of delivery: n KS17-2 measurement cable set n Two 1.5V AA batteries n Rubber holster METRAMAXI12 Set (article: M212D): n With HC20 case and WZ12A current clamp
10M/400k nC ase with tilt stand and take-up reel nD imensions (WxHxD): 92 x 154 x 25mm nW eight: approx. 0.2 kg with batteries nM anufacturers guarantee: 3 year material and workmanship
300 V 600 V
CAT III CAT II
DATA
Min-Max
RANGE Digits Hz
AUTO/MAN
4000
Bar Graph
AC, DC
AC, DC
40 M
METRAMAX 12 Set
400 k
LoV
Ma
in de
Germ a
ny
GOSSEN METRAWATT
16
Table of Contents
METRAportI40S
Article: M234D
4 Digit Folding Digital Multimeter for Universal Use in General Electrical and Electronics Applications, as well as for Automotive Service Ideal reading angle adjustment is made possible by the tilt stand, and when suspended from the neck strap both hands are free for performing measurements. The instrument is switched off automatically when folded closed, and the display and the control panel are protected against damage. User-friendly thanks to resettable auto-fuses for the current measuring ranges Scope of delivery: KS17-2 measurement cable set n n Two 1.5V AA batteries Carrying strap n n DAkkS calibration certicate TRMS TRMS TRMS 300 V
AC
AC+DC 20 kHz
CAT II
D-K1508001-01
Min-Max
DATA
30,000
Digits
AC, DC
Bar Graph
RANGE
30 M
AUTO/MAN
AUTO Fuse
CLIP
AC, DC
TC/ RTD
kHz
RPM
METRAportI3A
Article: M113A
Folding analog multimeter for demanding applications with analog display and 46 measuring ranges for universal use in process engineering, electronics and electrical applications, testing, R&D, service and training in accordance with EN 61010-1/DIN VDE 0411, part 1
nF or measurement of voltage, current,
1to20M nS cale can be tilted with folding lid which also provides protection during transport Scope of delivery: n KS17-2 measurement cable set n 9V at cell battery per IEC 6LR61 n Carrying strap
Class
Analog
resistance and level nW ith reective scale nH igh input resistance of 10M for no-load voltage measurement nA utomatic battery cutoff when instrument is folded closed nO verload protection in all 250V~ ranges (except 10A range) n9 voltage measuring ranges: 100mVto600V
2.5
500 V
CAT II
20 M
AC, DC
AC, DC
dB
Ma
in de
Germ a
ny
GOSSEN METRAWATT
Table of Contents
17
METRAmax 2
Article: M102A
METRAmax 3
Article: M103A
METRAmax6
Article: GTM3060000R001 Resistance Measuring Instrument with Analog Display for Use in the Plant, on Service Calls and for Installation Work
nM easuring method: current measure-
The analog multimeter was developed in cooperation with a renowned German training systems manufacturer and fullls requirements for instruction and vocational education. Its suitable for balancing, and inspection work as well.
nV oltage measurement: 100mV to 300V nC urrent measurement: 100mAto 3A nZ ero point can be set to left or center nO utstanding overload capacity nA utomatic battery cutoff nD imensions (WxHxD):
Analog Multimeter for Training Applications, and for Use in the Electrical Trades. Overload protection with integrated auto-fuse and high performance PTC thermistors.
nV oltage measurement: 30V to 600V nC urrent measurement: 300mAto 15A nP rotective conductor nD imensions (WxHxD):
ment
nR ugged, moving-coil mechanism with
100 x 140 x 35mm nW eight: approx. 0.3kg with batteries Scope of delivery: n Multimeter n One 1.5V AA battery
conditions
nD imensions: 100 x 140 x 35mm nW eight: approx. 0.3kg without battery
Class
Analog
2.5
600 V
CAT II
300 k
300 V
CAT III
AUTO FUSE
Analog
2=/3~
Class
300 V
CAT II
AC, DC
AC, DC
AC, DC
AC, DC
dB
Class
Analog
1.5
300 k
METRAHITI1A / 2A
Compact, Basic Analog Multimeter for Training and Hobby, and for Electrical Applications
nD imensions (WxHxD): 92 x 126 x 45mm nW eight: approx. 0.25kg without battery nB attery: 1.5V, IEC LR 6 (AA) nM anufacturers guarantee: 1 year material and workmanship
Class
2.5
500 V
CAT II
dB
AC, DC
AC, DC
1 M
Ma
in de
Germ a
ny
GOSSEN METRAWATT
18
Table of Contents
METRACALIMC
Article: M245A
Calibration and Measurement: Efficient and Time-Saving thanks to Simulation The new, extremely cost-effective METRACAL MC multi-functional process calibrator is distinguished by its ruggedness, easy handling, outstanding functionality, accuracy and PC systems compatibility. The METRACAL MC streamlines measuring, calibration and inspection work for chemical processes, in the lab and in R&D, for the production of electronic measuring transducers and when balancing and calibrating metrology components. The integrated multimeter and calibrator make it possible for measuring technicians to simulate sensor conditions at the inputs of transducers, transmitters and buffer ampliers, and at the same time to accurately measure the electrically isolated signal output, and to save results to memory on-site.
Display illumination and multiple display, e.g. functions and output value or measurement and simulation values etc.
nU niversal calibrator, simulator and
Connection for external power pack and continuous, battery-free power supply Scope of delivery: n KS29 measurement cable set n Rubber holster with carrying strap n Two 1.5V AA batteries n DAkkS calibration certicate
multimeter for mA/mV ... V/C (Pt100/1000, Ni100/1000, thermocouples: J, L, T, U, K, E, S, R, B, N)/ 30to2000 nD ual mode simultaneous calibration and measurement (U/I) nT RMS AC measurement to 1kHz nM easurement and simulation in absolute terms and as percentages (scaled) nM emory for measurement results: 2MB TRMS 300 V
AC CAT II
1Hz to 2kHz nR amp and staircase functions n METRAwin 90-2 calibration software (optional) nT ransmitter simulator (sink: 0 to 24 mA) nD AkkS calibration certicate included nR ugged, EMC compliant design
Digits 00000
60,000
0000 0000
IP 65
IR
AC, DC
AC, DC
mA
30 M
TC/ RTD
Hz
D-K1508001-01
Ma
in de
Germ a
ny
GOSSEN METRAWATT
Table of Contents
19
Multifunctional Calibrator for Process Engineering 18 Calibrator Functions. The newly developed calibrator can be used for generating and simulating a broad range of electronic quantities, and also covers 10 different thermocouples and 4 resistance temperature sensors. Its outstanding accuracy and rugged design make the METRAHIT CAL a high performance tool for use in the workshop and the lab.
nS imulation function for voltage, resistance
parameters conguration with a PC (optionally available IR-USB adapter and software) nH andheld, battery powered instrument for use directly on-site with additional mains connection for continuous operation
Scope of delivery: n KS17-2 measurement cable set n Rubber holster with carrying strap n Two 1.5V AA batteries n DAkkS calibration certicate Scope of delivery, METRAHITICAL Pack: n Handheld calibrator with rubber holster n METRAHIT X-TRA with rubber holster n Measurement cable sets and batteries n HC30 hard case n DAkkS calibration certicate
and frequency
nS ource and sink functions for current, in
particular for process quantities, e.g. 0 to 20 mA nT emperature simulation for resistance thermometers and thermocouples nS imple adjustment of values with function keys and entry eld nI nterval functions, ramp functions and procedures. Automated sequences with adjustable time quantities can be generated for all simulation quantities.
www.gossenmetrawatt.
More information at
com
METRAHITI1ASi
Article: M235H
nD ata transmission and management, as well as
The handy, rugged addressing and diagnostics tool for initial start-up, maintenance and service of ASi systems offers the following functions:
nR ead-out of slave addresses 0 through 31,
documentation of system parameters with optional software Scope of delivery: n ASi addressing device and tester n Rubber holster with carrying strap n Connector cable set, M12 to jack plug n Z236A addressing cable n Z231G module base with addressing socket n 4 batteries per IEC LR6
and A and B, without scrolling including clear-cut, complete LCD nR ead-out of slave IO and ID codes (including extended ID codes 1 and 2) nS tandard addressing mode and extended addressing mode per ASi version 2.1 nP rogrammable ID code 1 nF unction test for slaves, including analog slaves with prole 7.2 (7.3 in preparation) nR ecognition of complete arrays of system components nS torage, diagnostics and PC gateway functions nC onnection with jack plugs
Type
METRAHIT 1ASi Module base HC20
Article Number
M235H Z231G Z113A
Ma
in de
Germ a
ny
GOSSEN METRAWATT
20
METRAHITI27M
Article: M227A
Milliohmmeter, 4 Digit Multimeter and Data Logger, Temperature Measuring Instrument for On-Site Service and for Laboratory Tasks: General low-resistance measurements Measurement of low value contact resistances at welding seams and riveted joints Determination of low value contact resistances on aircraft outer skins (lightning protection and wick test)
nM illiohmmeter: 3000mto300.00m with1A
measuring current and 30.00mto30.00 with 200mA measuring current, and 1 A pulsed nK elvin connection (4-wire measurement) nV oltage measurement: 3V to 600 and 3V to 600 V AC with 30,000 digits nR esistance measurement: 300to30M nF requency measurement: 300Hzto3kHz nD ATA hold memory for up to 1200 measured values nC ontinuity and diode testing, overload protection
Scope of delivery: nK S17-S measurement cable set n Rubber holster with carrying strap n Three AA rechargeable NiMH batteries n DAkkS calibration certicate
METRAHITI27I / 27AS
Article: M227B/M227C/M227S
Insulation Resistance Tester, Milliohmmeter, 4 Digit Multimeter and Data Logger. In addition to a milliohmmeter, an insulation tester has been integrated for measurements up into the gigaohm range. Where service and repairs in the eld of aviation technology are involved, the instrument can be used in a broad range of applications.
nI nsulation resistance measurement: 30.00Mto3.000G with selectable test
voltages of 50, 100, 250 and 500V nM illiohmmeter: 3.000m to 300.00m with 1A measuring current and 30.00mto30.00 with 200mA measuring current nK elvin connection (4-wire measurement) nV oltage measurement: 3V to 600 V DC and 3V to 600 V AC with 30,000 digits n Continuity and diode testing n Overload protection nL CD panel with background illumination Scope of delivery, METRAHIT 27 I (article: M227B): n Metrahit 27 I n KS17-S measurement cable set n Three AA rechargeable NiMH batteries n NA HIT 27 charger n KC4 set of Kelvin clips (2 pieces) n DAkkS calibration certicate
in de
Additionally included in Avionic-Set (Article: M227C) nK C27 set of Kelvin probes (2 pieces) nH C30 hard case nU SB pack (USB cable, CD ROM with drivers, METRA-win 10/METRAHIT software) Additionally included in METRAHIT 27 I Set (article: M227S) nH C30 hard case nK S17-2 measurement cable set
Ma
Germ a
ny
GOSSEN METRAWATT
Table of Contents
21
Additionally included in METRAHIT H+E CAR-Set (article: M227U) Hybrid test case kit, orange, n with test probes, measurement cables and Kelvin clips Options: n Hybrid test case kit(Z227U) n ADK automotive diagnostics case (Z227T) See data sheet for included equipment.
Z227U
Z227T
METRAHITI27EX
Article: M227F
4 Digit Milliohmmeter for Potentially Explosive Atmospheres for measuring low-value contact resistance in explosive atmospheres, e.g. at contacts inside aircraft fuel tanks (bonding test), as well as for general low-value resistance measurements inside and outside of potentially explosive atmospheres, for example on aircraft outer skins (lightning protection and wick test)
nM easuring ranges: 30m, 300m, 3, 30 n Resolution: 10 n DATA hold memory: 1200 measured values nP roduct type test certicate:
INERIS 05ATEX0040 n Ex designation: Ex II 2 G EEx ia IIA T4 Scope of delivery: n 8 Ex approved rechargeable NiMH batteries n KC27 Kelvin probe (1 piece) n KC4 Kelvin clip (1 piece)
n HC30 hard case n DAkkS calibration certicate n Ex certicate: INERIS 05ATEX00401 n Special variant for AIRBUS: M227G with AIRBUS logo; ID no. 97F92003500 per AMM
Ma
in de
Germ a
ny
GOSSEN METRAWATT
22
Table of Contents
METRAHIT
BASE
EBASE
PRO
ESPECIAL
TECH
ETECH
DC voltage measurement Intrinsic error for V DC AC voltage measurement Intrinsic error for V AC TRMS V DC current measurement Intrinsic error, DC AC current measurement Intrinsic error, AC TRMS A Resistance measurement Intrinsic error, resistance 4-wire milliohm measurement Power and energy measurement Mains quality Capacitance measurement Intrinsic error, capacitance Temperature measurement, Pt100/1000 Thermocouple (type) Continuity testing Diode test Frequency measurement Level measurement (dB) DATA / Min-Max storage Data storage (measured values) Analog display, 35/36 scale graduations Digital display (digits/digits) Display illumination Measurements per second Bandwidth, V AC / V DC Interface Automatic blocking sockets Measuring category Calibration certicate Weight with batteries Batteries / operating hours Dimensions in mm (W x H x D) Protection Approvals and certicates Accessories / included Software option Article number
in de
10mV...1000 V 0.05% rdg.+3d 10mV...1000V 0.5% rdg.+9d AC, AC+DC With clamp With clamp AC, AC+DC 0.01W...40MW -250...+1372(K) n 5.1 V 0.01 Hz...100kHz n n 4=12,000 d n 40 analog/10 digital 1kHz n CAT III/1000V CAT IV/600V DAkkS 395g 2 ea. 1.5V / 200 89 x 199 x 43 IP 52 CE, VDE-GS Cable set M241A CE CS, HC20, RH METRAwin10 M251A IR 10kHz
6 7
10mV...1000V 0.05% rdg. + 3d 10mV...1000V 0.5% rdg. + 9d AC, AC+DC 0.1mAto10A 0.9% rdg. + 5d 0.1mAto10A 1.5% rdg.+30d AC, AC+DC 0.01W...40MW -250...+1372(K) n 5.1V 0.01Hz...100kHz n n n 4=12,000d n 40 analog/10 digital 20kHz IR n CAT III/1000V CAT IV/600V DAkkS 395g 2 ea. 1.5V / 200 89 x 199 x 43 IP 52 CE, VDE-GS Cable set M242A CE CS, HC20, RH METRAwin10 M252A CAT II/600V
6 7
10mV...1000V 0.05% rdg.+3d 10mV...1000V 0.5% rdg.+9d AC, AC+DC 1mA...10A 0.5% rdg.+5d 1mA...10A (16A) 1.5% rdg.+30d AC, AC+DC 0.01W...40MW 10pF ... 1000F n 5.1V 0.01Hz...100kHz 0.01 Hz...300kHz n n n 4=12,000d n 40 analog/10 digital 10kHz n CAT III/1000V CAT IV/600V DAkkS 395g 2 ea. 1.5V / 200 89 x 199 x 43 IP 52 CE, VDE-GS Cable set M243A CE CS, HC20, RH METRAwin10 M253A 20kHz IR
6 7
0.01W...60MW
0.01W...60MW
0.01W...60MW
0.2% rdg.+5d
0.2% rdg.+5d
0.2% rdg.+5d
1% rdg.+6d -250...+1372(K)
0.01 Hz...300kHz n
0.01 Hz...300kHz n
n 4 / =60,000d
4 / =60,000d
4 / =60,000d
Ma
Germ a
ny
GOSSEN METRAWATT
Table of Contents
23
X-TRA
EXTRA
30M
ENERGY
ULTRA
OUTDOOR
SECULIFE
METRAHIT
10mV...1000V 0.05% rdg.+3d 10mV...1000V 0.5% rdg.+9d AC, AC+DC 10nA...10A 0.5% rdg.+5d 10nA...10A 1.5% rdg.+30d AC, AC+DC 0.01W...40MW 0.01W...60MW 0.2% rdg.+5d 10pF ... 1000F 10pF ... 600 F 1% rdg.+6d -200to+850 -250...+1372(K) n 5.1V 0.001Hz...1MHz n 540kB (15400) 2048kB (61600) n 4=12,000d n 40 analog/10 digital 20kHz IR n CAT III/1000V CAT IV/600V DAkkS 395 g 2 ea. 1.5V / 200 89 x 199 x 43 IP 52 CE, VDE-GS Cable set, RH METRAwin10 M240A M250A CE CS, HC20, RH 100 kHz n 46/7=60,000d n
0.1mV...600V 1mV...600V 0.08% rdg.+5d AC+DC 100pA...120mA 0.02% rdg.+5d 1nA...120mA 0.1% rdg.+5d AC+DC 0.1mW...12MW 0.005% rdg.+5d 0.1mW...30W n 5.1V 0.01Hz...100kHz n 30,000 n 6=1,200,000d n 1 digital 10kHz IR CAT II/600V DAkkS 350g 2 ea. 1.5V / 200 84 x 195 x 35 IP 42 CE Cable set, RH METRAwin10 M230B
1mV...600V 10mV...600V 0.2% rdg.+30d AC, AC+DC 10nA...10A 0.05% rdg.+20d 10nA...10A 0.5% rdg.+25d AC, AC+DC 10mW...60MW 0.1% rdg.+5d n n 10pF ... 600F 1% rdg.+6d -200to+850 n 6.0V 0.01Hz...1MHz n n 300,000 Triple digital 60,000d n 10 digital 100kHz IR n CAT III/600V CAT IV/300V DAkkS 400g 2 ea. 1.5V / 200 89 x 199 x 43 IP 52 CE Cable set, RH METRAwin10 M249A
1mV...600V 10mV...600V 0.2% rdg.+30d AC, AC+DC 1nA...10(16)A 0.02% rdg.+5 10nA...10(16)A 0.5% rdg.+30d AC, AC+DC 1mW...30MW 0.05% rdg.+8d 1 pF ... 3 mF 1% rdg.+6d -200to+850 n 4.5V 0.001Hz...1MHz n n 300,000 Triple digital 310,000 d n 10 digital 100kHz IR/Bluetooth n CAT III/600V CAT IV/300V DAkkS 400g 2 ea. 1.5V / 200 89 x 199 x 43 IP 52 CE Cable set, RH METRAwin10 M248A/B
10mV...1000V 0.05% rdg.+3d 10mV...1000V 0.5% rdg.+9d AC, AC+DC 10nA...10A 0.5% rdg.+8d 10nA...10A 1.5% rdg.+30d AC, AC+DC 0.01W...40MW 0.2% rdg.+5d 10pF ... 1000F 1% rdg.+6d -200to+850 -250...+1372(K) n 5.1V 0.001Hz...1MHz n 540kB (15400) n 4=12,000d n 40 analog/10 digital 20kHz IR n CAT III/1000V CAT IV/600V DAkkS 395 g 2 ea. 1.5V / 200 89 x 199 x 43 IP 65 / IP 52 CE Cable set, RH CS, HC20, RH METRAwin10 M240O M687A
DC voltage measurement Intrinsic error for V DC AC voltage measurement Intrinsic error for V AC TRMS V DC current measurement Intrinsic error, DC AC current measurement Intrinsic error, AC TRMS A Resistance measurement Intrinsic error, resistance 4-wire milliohm measurement
Power and energy measurement
Thermocouple (type) Continuity testing Diode test Frequency measurement Level measurement (dB) DATA / Min-Max storage
Data storage (measured values)
Analog display, 35/36 scale graduations Digital display (digits/digits) Display illumination Measurements per second Bandwidth, V AC / V DC Interface Automatic blocking sockets Measuring category Calibration certicate Weight with batteries Batteries / operating hours Dimensions in mm (W x H x D) Protection Approvals and certicates Accessories / included Software option Article number
in de
Ma
Germ a
ny
GOSSEN METRAWATT
24
Table of Contents
METRAHIT
2plus
WORLD
METRAmax12
METRAport 40S
DC voltage measurement Intrinsic error for V DC AC voltage measurement Intrinsic error for V AC TRMS V DC current measurement Intrinsic error, DC AC current measurement Intrinsic error, AC TRMS A Resistance measurement Intrinsic error, resistance 4-wire milliohm measurement Power and energy measurement Power quality Capacitance measurement Intrinsic error, capacitance Temp. measurement, Pt100/1000 Thermocouple (type) Continuity testing Diode test Frequency measurement Level measurement (dB) DATA / Min-Max storage Data storage (measured values) Analog display, 35/36 scale graduations Digital display (digits/counts) Illuminated display Measurements per second Bandwidth Interface Automatic blocking sockets Measuring category Calibration certicate Weight with batteries in g Batteries / operating hours Dimensions in mm (W x H x D) Protection Approvals and certicates Accessories / included Software option Article number
in de
100mV...600V 0.5% rdg. +3d 100mVto600V 1% rdg.+3d AC 10mA...10(16) A 1% rdg.+5d 10mA...10(16) A 1.5% rdg.+2d AC 0.1W...40MW 0.7% rdg.+3d -50...+400(K) n 2V 0.1 ... 1kHz n n 3 /7=6000d
6
100mV...1000V 0.5% rdg.+3d 100mV...1000V 1% rdg.+3d AC 10mA...10(16) A 1% rdg.+5d 10mA...10(16) A 1.5% rdg.+2d AC 0.1W...40MW 0.7% rdg.+3d 10pF...400mF 1% rdg.+6d -50...800(K) n 2V 0.1Hz...1kHz n n 3 /7=6000d
6
100mV...600V 0.5% rdg. +2d 100mV...600V 1% rdg. +5d 10mA...10A 0.8% rdg.+2d 10mA...10A 1.0% rdg.+5d 0.1W...40MW 0.8% rdg.+2d 1.0pF...40mF 3% rdg.+40d n 3V 0.01Hz...400kHz n n 3=4000d n 20 analog/2 digital 500Hz CAT III/300 V CAT II/600V 200g 2ea.1.5V/600 92 x 154 x 25 IP 52 CE Cable set M212A
10mV...600V 0.2% rdg. +3d 10mV...600V 0.5% rdg. +30d AC 10nA...10A 0.5% rdg.+5d 10nA...10A 1.0% rdg.+30d AC 10...30M 0.2% rdg.+5d 10pF...300mF 1% rdg.+6d -200...+850 -250...+1372(K) n 5.1V 0.01Hz...1MHz n n 4=30,000d n 20 analog/2 digital 10kHz USB CAT II/300 V DAkkS 450g 2ea.1.5V/200 146 x 118 x 44 IP 42 CE Cable set METRAwin10 M234D
n 20 analog/2 digital 1kHz n CAT III/600 V DAkkS 350g 2ea.1.5V/up to 750 84 x 195 x 35 IP 40 CE Cable set, RH M205A
n 20 analog/2 digital 1kHz IR n CAT IV/600 V CAT III/1000V DAkkS 350g 2ea.1.5V/up to 750 84 x 195 x 35 IP 40 CE Cable set, RH METRAwin10 M206A
Ma
Germ a
ny
GOSSEN METRAWATT
Table of Contents
25
T-COM
T-COM plus
ISO
ISO Aero
27M
27I(AS)
27H+E CAR
METRAHIT
100mV...600V 0.5% rdg.+1d 100mV...600V 1.5% rdg.+3d AC, AC+DC 100mA...1A 0.5% rdg.+5d 100mA...1A 1.5% rdg.+5d AC, AC+DC 100mW...30MW 0.5% rdg.+1d 5kW...300MW 5kW...300MW 100V 10V/100V 30nF...300mF 1% rdg.+6d -200...+850 -250...+1372(K) n 13V 300Hz...300kHz n n 540kB (15,400) n 3=3100d n 40 analog/10 digital 10kHz IR n CAT II/600V CAT III/300V DAkkS 420g 2 ea. 1.5V / 200 89 x 199 x 43 IP 54 CE Cable set, pouch, RH METRAwin10 M246A M246S
300mVto600V 0.5% rdg.+1d 300mV...600V 1.5% rdg.+3d AC, AC+DC 300mA...1A 0.5% rdg.+5d 300mA...1A 1.5% rdg.+5d AC, AC+DC 300W...30MW 0.5% rdg.+1d 5kW...3GW 50V ... 1000V 5kW...3GW 10V ... 500V
100mV...600V 0.1% rdg.+5d 100mV...600V 0.2% rdg.+10d With clamp 10mW...30MW 0.1% rdg.+5d 0.001mW...30W 10kW...3GW 50V ... 500V -200...600 n 3V 0.01Hz...3kHz n 32kB (1000) 4=31,000d n 10 analog/2 digital 1kHz IR CAT II/600V DAkkS 420g 3 ea. 1.5V / 20 84 x 195 x 35 IP 54 CE Cable set, RH METRAwin10 M227A Cable set, RH (case) METRAwin10 M227B /C/S M227T/U
DC voltage measurement Intrinsic error for V DC AC voltage measurement Intrinsic error for V AC TRMS V DC current measurement Intrinsic error, DC AC current measurement Intrinsic error, AC TRMS A Resistance measurement Intrinsic error, resistance 4-wire milliohm measurement Insulation measurement / measuring voltage Capacitance measurement Intrinsic error, capacitance
Temp. measurement, Pt100/1000
30nF...300mF 1% rdg.+6d -200...+850 -250...+1372(K) n 13V 0.1Hz...300kHz n 540kB (15,400) n 4=30,000d n 40 analog/10 digital 10kHz IR n CAT II/1000V CAT III/600V DAkkS 420g 2 ea. 1.5V / 200 89 x 199 x 43 IP 54 CE Cable set, pouch, RH METRAwin10 M246B M246M
Thermocouple (type) Continuity testing Diode test Frequency measurement Level measurement DATA / Min-Max storage Data storage (measured values) Analog display, 35/36 scale graduations Digital display (digits/counts) Display illumination Measurements per second Bandwidth Interface Automatic blocking sockets Measuring category Calibration certicate Weight with batteries Batteries / operating hours Dimensions in mm (W x H x D) Protection Approvals and certicates Accessories / included Software option Article number
in de
Ma
Germ a
ny
GOSSEN METRAWATT
26
Table of Contents
Shunts
Shunt Resistors for Multimeters Without Current Measuring Function The shunt resistors serve as adapters for multimeters without their own current measuring function, or are used to extend the current range (NW10A).
PMA16
Article: Z228A
SM16
Article: GTM9070190E0002
USB-HIT
Z216A/Pack: Z216B
PMA16 Power Measuring Adapter The power measuring adapter is an intermediate plug for the measurement of power consumption at single-phase consumers with an additional cable for connection to the multimeters voltage path.
SM16 Current Measuring Adapter For safe, trouble-free measurement of current consumption via the mains plug of connected power consumers. The cable with contact-protected connectors is connected directly to the current measurement sockets at the multimeter.
IR RS 232 Bidirectional Snap-On Interface Adapter Data are transmitted from the multimeter to the adapter in an electrically isolated, bidirectional fashion, and to the USB interface for PCs and laptops. nU SB-Pack: including METRAwin10/METRAHit software.
In
cl. Softwar
BD232
Pack 1
Article: Z215A
IR RS 232 Snap-On Interface Adapter The infrared interface allows for electrically isolated data transmission between PC and multimeter. Data transmission is indicated visually by means of two LEDs. The BD232 interface adapter is above all recommended for multimeters with integrated memory. It can also be used for online data transmission with multimeters which do not have integrated memory. The BD-Pack is available as a complete package for
single-channel operation. In order to expand to 2, 3 or 4-channel operation, an additional BD232 is required for each channel, as well as the additionally required multimeters.
n BD Pack 1: including METRAwin10/ METRAHit software, RS 232 interface cable Z3241 and installation instructions
In
cl. Softwar
USBIXTRA
Article: Z216C
Z206D
Article: Z206D Quick Charger for NiMH / NiCd Batteries (AA, AAA)
ncl
. Driver
Bidirectional Infrared-USB Interface Adapter for Starline Multimeters with Serial IR Interface for Connection to a USB Port at a PC Adapter for data transmission between the multimeter and the PC.
Ma
in de
Germ a
ny
GOSSEN METRAWATT
Table of Contents
27
NA X-TRA
Article: Z218G
NA Hit 2x
Article: Z218H
Mains Power Pack: 90 ... 250 V AC / 5 V DC Power pack for battery-saving mains operation, for continuous measurement using multimeters with internal memory
nB road range input: 50 / 60Hz nM easuring category: CAT IV at 600V
Mains Power Pack: 90 ... 250 V AC / 5 V DC The power pack allows for battery-saving mains operation, in particular for continuous measurement with internal memory.
nM odied plug connectors
for below mentioned instruments manufactured as of 2004 nB road range input: 50 / 60Hz measuring category: CAT IV at 600V
Overview
Multimeter Accessories
com www.gossenmetrawatt.
METRAHIT METRAmax METRAport
PRO/ESPECIAL
ISO/ISO@Aero
X-TRA/EXTRA
TECH/ETECH
SECULIFE HIT
BASE/EBASE
T-COM/plus
OUTDOOR
27H+E CAR
Type
METRACAL MC
23/24/25S
ONEPlus
ENERGY
WORLD
32S/XS
16I/T/U
22S/M
26S/M
ULTRA
2 plus
1A/2A
27M/I
30M
29S
40S n n n n
Ma
CAL
Shunts NW300mA NW3A NW10A Adapter USB X-TRA BD232 BD-Pack1 USB-Hit USB-Pack SM16 PMA16 EMA1 n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n
n n
n n n n n n n n n n n
n n n n
n n n
n n
n n n
n n n
n n n n
in de
n n n n
n n n n n
n n
n n
n n
n n
n n
n n n n n n n n n n n n
3A
Germ a
ny
GOSSEN METRAWATT
12
28
Table of Contents
Article: see table Advantages: nE lectrical circuits need not be interrupted no electrical connection to the conductor nM easurement of current up to 2000A no multimeter overloading as a result of current surges
AC-DC Current Sensors with Voltage Output, mV / A Current within conductors can be conveniently and safely measured with current clamp sensors and multimeters. Scope of delivery:
nC urrent sensor with connector cable n9 V at cell battery
Type Z13B
Article
Measuring Measuring Conductor Dia. Range DC, ~AC Category 0.5...60/600A CAT IV/300V 50 Z213B 0.2...40/400A~
1.5%/2%
CP1100
The CP30, CP330 and CP1100 current clamp sensors have been developed for precise contactless measurement of alternating and direct current. Theyre well suited for precision current measurement thanks to the use of the latest Hall effect technology.
a key
nM easuring category: CAT III/ 300V
Type CP30
Article
Measuring Range, AC
Conductor Dia., mm
Overcurrent Frequency Capacity Range (DC) 500A (60 s) 600A (60 s) Up to 20kHz (-1dB) Up to 20kHz (-3dB)
Intrinsic Gain Drift /C Trans. Ratio Uncertainty mV/A (% rdg.+A) 1% + 2mA 1%+50/100mA 1%+100/500mA 0.01 0.1 0.1 100 10/1 10/1
Z201B 0...30A
25 25 32
Flexible current sensors with voltage output for measuring alternating current at difficult to access places; highly insulated and with range selector switch (selectable transformation ratio). Maximum phase error is 2.5 at a frequency of up to 1 kHz. Scope of delivery, METRAFLEX: n Two 1.5V AA batteries Type Article Measuring Range DC, AC 30/300/3000A 3/30/300A Measuring Category CAT III/1000V CAT IV/600V CAT III/1000V CAT IV/600V
METRAFLEX 300M
METRAFLEX 3000
610 160
100/10/1
1000/100/10 20Hz...100kHz
Ma
in de
Germ a
ny
GOSSEN METRAWATT
Table of Contents
29
AC Current Sensors
AC Current Sensors with Voltage Output, mV / A Current within conductors can be conveniently and safely measured with current clamp sensors and multimeters. Scope of delivery: nC urrent sensor with connector cable Advantages:
nE lectrical circuits need not be interrupted
WZ11B
Z3512A
WZ12C Type WZ12B WZ12C WZ11B Z3512A Article Z219B Z219C Z208B Z225A Measuring Range, AC Measuring Cable Category Dia. mm 15 15 20 52 Trans. Ratio mV/A 100 1000/1 100/10 1000/100/10/1 Frequency Range 45...65...500Hz 45...65...500Hz Intrinsic Uncertainty (% rdg. + A) 1.5%+0.1m 3%+0.15 m/2%+0.1
0.01 ... 100A CAT III/300V 0.001...15A / CAT III/300V 1...150 A 0.5...20A / CAT III/600V 5...20A 0 ... 1000A CAT III/600V
Overview
Multimeter Accessories
METRAHIT PRO/ESPECIAL ISO/ISO@Aero TECH/ETECH 27H+E CAR METRAmax METRAport
23/24/25S
OUTDOOR
ONEPlus
Type
METRACAL MC
BASE /EBASE
X-TRA/EXTRA
SECULIFE HIT
T-COM/plus
ENERGY
WORLD
32S/XS n n n n n
16I/T/U
22S/M
26S/M
ULTRA
2 plus
1A/2A
27M/I
30M
29S
40S n n n n n n
Ma
CAL
Current Sensors CP30 CP330 CP1100 Z13B WZ11B WZ12B WZ12C Z3512A n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n
n n n n n n n n
3A
Germ a
ny
GOSSEN METRAWATT
12
30
Table of Contents
AC Current Transformers
Z3512
Z3514
Advantages:
nE lectrical circuits need not be interrupted
no multimeter overloading as a result of current surges Type WZ12A WZ12D WZ11A Z3511 Z3512 Z3514 Article Z219A Z219D Z208A Measuring Range, AC 15 ... 180A 0.03 ... 150A 1 ... 200A Measuring Category CAT III/300V CAT III/300V CAT III/600V CAT III/600V CAT III/600V Conductor Dia. mm 15mm 15mm 20mm 30 x 63mm 52mm
Trans. Ratio mA/A
WZ12A/D
Frequency Range 45...65...400Hz 45...65...500Hz 48...65...400Hz 45... 65 Hz...1kHz 3045...65Hz...5kHz 30...45...65 Hz...5kHz
Intrinsic Uncertainty 3% rdg. (2.5% rdg. +0.1mA) 1 ... 3% rdg. (3% rdg. +0.4A) 0.5 ... 0.7% rdg. 0.5% rdg.
1 1 1 1 1 1
GTZ3511000 4 ... 500A R0001 GTZ3512000 0.5 ... 1000A R0001 GTZ3514000 1 ... 2000A R0001
Temperature Probes
Article: see table Scope of delivery: nZ 3431-3: temperature probe with a permanently mounted, standard immersion sensor nZ 3431-4 and Z3431-9: temperature probe without plug-in sensor
Intrinsic Uncertainty
AC Current Transformers with Current Output, mV/A Suitable for temperature measurement from -25to+1150 C. The measurement output is connected to the mV/V measurement input at the multimeter. Type Article
Measuring Range
Sensor Type NiCr-NiAl, type K thermocouple NiCr-NiAl, type K thermocouple NiCr-NiAl, type K thermocouple NiCr-NiAl, type K thermocouple NiCr-NiAl, type K thermocouple NiCr-NiAl, type K thermocouple NiCr-NiAl, type K thermocouple
Power Supply
-20 C... Z3431-3 GTZ3431003 R0001 +350 C -25 C... Z3431-4 GTZ3431004 R0001 +1150 C -20 C... Z3431-9 GTZ3431009 R0001 +350 C Z3431-5 GTZ3431005 ... +1100 C R0001 Z3431-6 GTZ3431006 ... +850 C R0001 Z3431-7 GTZ3431007 ... +450 C R0001 Z3431-8 GTZ3431008 ... +250 C R0001
in de
(0.5% baby cell, 250 >10k 1 mV/C 5 C...45 C 1.5V rdg.+0.5 C) hrs. Service life (1% baby cell, 250 >10k 1 mV/C 5 C...45 C 1.5V rdg.+1 C) hrs. Service life (0.5% baby cell, 250 >10k 1 mV/C 5 C...45 C 1.5V rdg.+0.5 C) hrs. Service life Standard immersion sensor, can be plugged into temperature probes Z343-4 and Z343-9 Surface sensor, can be plugged into temperature probes Z343-4 and Z343-9 High temperature sensor tape, can be plugged into temperature probes Z343-4 and Z343-9 Flexible, insulated sensor, can be plugged into temperature probes Z343-4 and Z343-9
Ma
Germ a
ny
GOSSEN METRAWATT
Table of Contents
31
Temperature Sensors
Scope of delivery:
TF400CAR
Z3409
temperature measurement and immersion measurements nT F400SURFACE: fast reacting surface temperanT F220:PT1000 immersion sensor for measureture sensor, type K thermocouple ments in gases and liquids nT S-Chipset: PT100 miniature temperature nT F550: PT100 immersion sensor for measuresensor (10 pieces, adhesive) for spot measurements in ovens and freezers ments at small measuring points Intrinsic Transient Accuracy Error K at 0 Recovery, T90 Water/Air C/...C GTZ3409000 130/1000 -40...+600 Class A 0.15/ Z3409 Pt100 5s/30s R0001 mm 600:1.35 39/1500 -50 ...+ 220 Class B 0.3/ TF220 Z102A Pt1000 8s/33s mm 220:1.4 GTZ3408000 Pt100 40/1500 -50 ...+ 550 Class B 0.3/ TF550 8s/33s R0001 mm 550:3.1 TF400 Z102C Pt1000 810/2310 -50 ...+ 500 Class B / / CAR mm TF400 K 280/130 -50 ...+ 400 / 2s SURFACE Z102E (NiCr-Ni) mm 2.3/10 -50 ...+ 550 Class B 0.4/ TSGTZ3406000 Pt100 0.3 s/15s mm 550: 3.1 Chipset R0001 Type Article Length of Sensor Element / Element Sensor Temp. Range
TF220/TF550
Lead in mm Strand, 2 ea. 0.35 Strand, 2 ea. 0.35 Strand, 2 ea. 0.35 Strand, 2 ea. 0.35 Strand, 2 ea. 0.35 0.25 dia./NiPt
Outer Jacket / Insulation PVC/PVC Teon / Teon V4A / glass PVC/PVC PVC/PVC /
Overview
Multimeter Accessories
METRAHIT PRO/ESPECIAL ISO/ISO@Aero METRACAL MC SECULIFE HIT BASE/EBASE T-COM/plus X-TRA/EXTRA/ETECH
www.gossenmetrawatt.
com
METRAmax METRAport
23/24/25S
OUTDOOR
ONEPlus
ENERGY
WORLD
Type
27H+E CAR
TECH/
32S/XS n n n n
16I/T/U
22S/M
26S/M
ULTRA
2 plus
1A/2A
27M/I
30M
29S
40S n n n n n n n n n n n n
in de
CAL
n n n n n n
n n n n n n
n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n
n n n n
n n n n
n n n n n n n n n n n n n n n n n n n n n
n n n n
n n n n
Temperature Sensors and Probes TF400CAR TF400SURF. TF220 TF550 TS Chipset Z3409 Z3431-3 Z3431-4 Z3431-9 n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n
Ma
Germ a
ny
GOSSEN METRAWATT
3A n n n n n n
12
32
Table of Contents
Article: GTZ3431002R0001 within a frequency range of 100 kHz to 750 MHz. The probe recties alternating voltages at a ratio of 1:1. The measuring instrument must have an input impedance of 10 M.
Z3431-2 High Frequency Probe: 100 kHzto750 MHz, 0.25to 50 VAC. In combination with a multimeter, the Z3431-2 high frequency probe allows for measurement of alternating voltages with an amplitude of 0.25 V to 50 V
Cable Sets
Cable Sets with Permanently Mounted Test Probes and Contact-Protected Angle Plugs for Safe Measuring Hook clips, alligator clips or push-on lugs can be attached to the test probes for special measuring tasks.
nK S17-ONE cable set (Z110K):
1000 V/CATIII, 1A, 600 V/CATIV, 1A 1000 V/CATII, 16A, 120cm long
nK S17-S cable set (Z110H):
KS17-S
1000V/CATII, 32A, 1000V/CATIV, 1A, with adjustable test probes, 150 cm long, 4 mm angle plug
nK S-NTS cable set (Z110W):
1000V/CAT II/III, 20A, double insulated silicon measurement cables, 120 cm long, with one pair each small test probes, alligator clips, clip hooks and North American test probes
nK S21-T cable set (Z11OU):
KS-AP
KS-NTS
KS21-T
KY95-3
Z502U
in de
Ma
Germ a
ny
GOSSEN METRAWATT
Table of Contents
33
Kelvin Clips
Article: Z227A
Kelvin Probes
Article: Z227B
Kelvin clips/probes are used for connecting low impedance resistors (e.g.contact resistors, shunts etc.) to an ohmmeter with 4-wire connection. This allows for compensation of cable resistance.
nK C4: Kelvin clips (1 set = 2 pieces) for 4-pole
with 2 stainless steel tips for 4-pole connection of low-resistance DUTs, cable length: 120cm
connection of low-resistance DUTs, cable length: 120cm, clip for connection to DUTs with diameters of up to 30mm
KC27
KC4
Overview
Type
Multimeter Accessories
METRAHIT PRO/ESPECIAL ISO/ISO@Aero X-TRA/EXTRA TECH/ETECH SECULIFE HIT BASE/EBASE T-COM/plus METRACAL MC 27H+E CAR 23/24/25S METRAmax METRAport
OUTDOOR
ONEPlus
ENERGY
WORLD
32S/XS n n n n n n n
16I/T/U
22S/M
26S/M
ULTRA
2 plus
1A/2A
27M/I
30M
29S
40S n n n n n n n
CAL
High-Frequency Probe Z3431-2 n Measuring Accessories KS17-ONE n n KS17-2 n n KS17-S n n KS-AP n n KS-NTS KS21-T KS29 n n KY95-3 Z3241 Kelvin Clips KC4 KC27 n n n n n
n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n
n n n n n n n n
n n n n n n n n
n n n n n n n n
n n n n n n n n
n n n n n n n n
n n n n n n n n n
n n n n n n n n
n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n
n n n n
n n
Ma
in de
Germ a
ny
GOSSEN METRAWATT
3A n n n n n n n
12
34
Table of Contents
METRAwin 90-2
Article: Z211A (update: Z211E) Calibration procedures are created with METRAwin software. Specied analog values are transmitted via the IR adapter from the PC to the calibrator and are fed to the device to be calibrated from the analog output at the calibrator. The analog output value from the device to be calibrated is then measured by the multimeter, and is returned to the PC for evaluation via the interface. If the measurement results remain within the specied tolerances, each consecutive calibration step is initialized automatically until the entire procedure has been run. Calibration data can be imported into other Windows applications (e.g. WoRd or ExcEl).
Calibration Software for Controlling Process Calibrators The handheld calibrator with multimeter is transformed into a professional, PC-based calibration system for measuring transducers, indicators, recording instruments etc. with the help of METRAwin 90-2 and an interface cable.
METRAwin 90-F
Article: Z211C/-FJ Article: Z211F transmission of measurement results from the METRAHIT multimeter to the computer. In the case of measuring transducers, the analog output value from the device to be calibrated is measured by a multimeter, and is returned to the PC for evaluation via the interface. If the measurement results remain within the specied tolerances, each consecutive calibration step is initialized automatically until the entire procedure has been run. nA utomated calibration of multimeters with IR interface nA djustment of the METRAHIT 22-29S/M via IR interface nG eneration, testing and documentation of calibration procedures
nO utstanding applications exibility with
A universal, professional, automated closed-loop calibration system for METRAHIT multimeters can be set up with METRAwin 90-F / FJ, an IEEE 488 interface at the PC and a Fluke 5500A, 5520A or 5700A calibrator. Also suitable for universal use for the calibration of analog and digital multimeters, recorders and power meters, power measuring transducers, amplier modules, transducers etc. Calibration procedures are generated with METRAwin 90-F. Specied analog values are transmitted via the IEEE 488 interface from the PC to the calibrator and are fed to the device to be calibrated from the analog output at the calibrator. A BD232 adapter is coupled to the computer via an RS 232 cable for automatic
calibration signal correction by means of key entry or via the interface nD ocumentation is printed out as a standard calibration report, or as a user-specic certicate nD ynamic data exchange with Microsoft Excel and Word nD ocumentation with all entries required for certicates in accordance with ENISO9000 n Determination of measuring uncertainty in accordance with DKD-3 after a specied number of measurements nS pecication of calculated measuring uncertainty in accordance with DKD-3 or TUR (test uncertainty ratio) included in the report
Ma
in de
Germ a
ny
GOSSEN METRAWATT
Table of Contents
35
METRAwin 10/METRAHit
Article: GTZ3240000R0001 Parameters Conguring and Analysis Software for METRAHIT Multimeters METRAwin 10/METRAHIT is a measurement data logging program for recording, visualizing, evaluating and documenting measured values from METRAHIT multimeters with reference to time. METRAwin 10/METRAHit supports the following multimeters (see complete list below): n METRAHIT Starline series (X-TRA, E and S series) in combination with USB-X-TRA interface adapter (max. 6 channels, max. 1 measurement/s, memory: 10 measurement/s). n METRAHIT 30M in combination with USB-Hit interface adapter (single-channel only, max. 10 measurements/s) or BD232 (max. 4 channels). n METRAHIT 22S-29S/M/C/I in combination with USB-Hit (singlechannel only, max. 20 measurements/s) or BD232 interface adapter, or SI232-II or SI232 memory adapter (max. 6 channels, max. 20 measurements/s). n METRAHIT 12S-18S/I/T/U/ONE Plus in combination with RS232 interface adapter (single-channel only) or SI232-II or SI232 memory adapter (max. 6 channels, max. 20 measurements/s). German, English, French, Spanish, Italian or Slovak can be selected as the user interface language. The software runs under Windows XP, Vista and 7 (branch office license). A test version can be downloaded from our website Depending upon device type, one or several of the following operating modes are possible:
nD evice conguration n Online recording of measurement data n Read-in and display of offline data
Analog/Digital Instrument
max. 6 channels, scroll and zoom function, absolute/relative time axis, automatic/manual Y scale, 2 cursors n XY diagram max. 4 channels. automatic/manual Y scale, 2 cursors n Data logger table max. 12 channels, data export to ASCII le or via the clipboard to other Windows programs e.g. MS Excel Amongst other possibilities, a continuous line recorder printing option is available for documenting measurements. Up to 10 channels can be printed out continuously as a Yt line graph at a color printer with this function.
n Math functions
Yt Diagram
XY Diagram
Measurement data from different channels can be linked and processed with high performance arithmetic functions.
Data Logger Table
Overview
Software
ISO/ISO@Aero
com www.gossenmetrawatt.
MULTIMETER METRAHIT 12-18 S/I/T/U METRAport 27H+E CAR 23/24/25S Calibrator METRACAL MC 28C/28C Light n SECULIFE HIT
X-TRA/EXTRA
OUTDOOR
ESPECIAL
ONEPlus
ENERGY
T-COM/plus
WORLD
32S/XS
ULTRA
22S/M
2 plus
26S/M
27M/I
30M
29S
40S
METRAwin 90 FJ n
n
in de
18C
CAL
3A
Ma
Germ a
ny
GOSSEN METRAWATT
36
Table of Contents
com www.gossenmetrawatt.
METRAmax 1A / 2A n n n n 2/3/6 n n n n n n n 12 n n n METRAport 40S / 3A n n n
Cordura belt pouch Magnetic hanger and strap HIT-Clip for METRAHIT with rubber holster F809 Ever-ready case with cable compartment F822 Ever-ready case with cable compartment F823 Ever-ready case with cable compartment F825 Ever-ready case with cable compartment F829 Carrying pouch F836 Ever-ready case with cable compartment Ever-ready case for 2 instruments, F840 2 adapters and accessories F841 Carrying pouch GH X-TRA Rubber holster GH18 Rubber holster with carrying strap GH19 Rubber holster HC20 Hard case for 1 device, accessories HC30 Hard case for 2 devices, accessories
HitBag
F809
F822
F823
F840
F825
F829
F836
F841
HC30 GH X-TRA
in de
HIT-Clip
GH18
GH19
HC20
Ma
Germ a
ny
GOSSEN METRAWATT
Table of Contents
MAINS QUALITY
37
MAINS QUALITY
Mains Quality Always on the Safe Side with Clean Electrical Networks Industry, commerce, health care services, banks and other service providers are extremely dependent upon electrical and electronic systems. These systems inuence mains quality themselves in many ways, but they react extremely sensitively to disturbances as well. Theres only one convincing response to the challenges faced by users in the area of electrical power supply: highly versatile MAVOWATT mains quality analyzers for mains quality testing and assurance. With the help of these innovative class A (2008) products, all relevant measured quantities can be acquired which are decisive for the quality of electrical supply power the perfect foundation for sustainable optimization.
GOSSEN METRAWATT
38
Table of Contents
MAVOWATTI4
Article: GTM3033000R0001 The multiple power meter for direct measurement of DC power, as well as RMS power measurement for single-phase alternating current and balanced load three-wire, threephase current.
n Determination of reactive power nM easurement of phase-to-phase
voltage(s)
nI deal instrument for training facilities n Phase sequence indicator n cos j measurement
MAVOWATTI20
In
cl. Softwar
costs
D etermination of CO2 footprint D etermination of inverter efficiency U ninterrupted recording of all mains-
earth. Recording of energy exported to and imported from the grid has proven especially advantageous within a setting of alternative energy concepts. Energy Platform Report Writer Software (EPRW) License-free EPRW software records parameters including curves for voltage, current, active, reactive, and apparent power, power factor, harmonics, import, energy and much more in a user congured report. An energy audit report summarizes the energy measurement which consists of basic billing parameters such as tariff periods (peak, standard and off-peak), peak loads, energy costs and CO2 balance. Scope of Delivery Energy and power analyzer including a complete set of measurement cables, rechargeable battery, charger, 4 GB CF memory card, factory calibration certicate, operating instructions, EPRW software and carrying pouch
relevant parameters
M easurement possible at 2 systems:
AC/DC
M onitoring of energy ow direction License-free EPRW software P rint-out of comprehensive, customer-spe-
cic reports
Compatible with DranView6
Applications The MAVOWATT 20 mains and power analyzer acquires power, demand and energy, and it calculates consumption costs as well as CO2 footprint. Harmonics and RMS voltage dips can also be recorded for the purpose of mains evaluation. DC coupled measurement inputs make it possible to determine the efficiency of photovoltaic inverters. Channel D is laid out as a differential input for measuring voltage between the neutral conductor and protective
An overview of the softwares performance features is available on the Internet (see order information for web address). Please refer the data sheets for further technical specications.
in de
Ma
Germ a
ny
GOSSEN METRAWATT
Table of Contents
39
(30/300/3000 A) ISOFLEX-MHXL mains power pack R R/PS/4A adapter cable for 4 DRANFLEX AC/DC current clamp sensor MAVOWATT 20 Set 6 (M817V) MW 20 and accessories (see above) DRANFLEX 3003XL/24 three-phase AC current sensor (30/300/3000 A) DRANFLEX 3000XL/24 AC current sensor (30/300/3000 A) ISOFLEX-MHXL mains power pack RR/PS/4A adapter cable for 4 DRANFLEX MAVOWATT 20 Set 7 (M817Z) MW 20 and accessories (see above) Additionally with exible current sensors: 4 ea. DRANFLEX 300MH (3/30/300A) with ISOFLEX-MHXL
Measured Quantities
U, I, P, S, Q, TPF, DPF, f, demand THD / harmonic spectrum (U, I, P), TID sub-harmonic spectrum (U, I) Crest factor, K factor, transformer
and energy
derating factor, telephone interference factor, asymmetry (deviation from RMS values and sequence components) W, VA, VAR, TPF, DPF, consumption, energy etc. Available Menu Languages
European version includes:
New
English, French, Finnish, German, Italian, Polish, Spanish and Swedish Asian version includes: English, Chinese (simplified and traditional), Japanese, Korean and Thai General Technical Data
Dimensions: Weight: 1.8 kg Operating temperature: 0 to +50 C Storage temperature: -20 to +50 C Atmospheric humidity: System time:
MAVOWATT 20 Sets MAVOWATT 20 Set 1 (M817Q) MW 20 and accessories (see above) 4 TR-2500A AC current clamps (10 ... 500 A) MAVOWATT 20 Set 2 (M817R) MW 20 and accessories (see above) 4 TR-2510A AC current clamps (1 ... 10A) MAVOWATT 20 Set 3 (M817S) MW 20 and accessories (see above) DRANFLEX 3003XL/24 three-phase AC current sensor (30/300/3000 A) DRANFLEX 3000XL/24 AC current sensor (30/300/3000 A) ISOFLEX-MHXL mains power pack RR/PS/4A adapter cable for 4 DRANFLEX MAVOWATT 20 Set 4 (M817T) MW 20 and accessories (see above) 4 TR-2550A AC current clamps (1 ... 100 A) MAVOWATT 20 Set 5 (M817U) MW 20 and accessories (see above) DRANFLEX 3003XL/24 three-phase AC current sensor (30/300/3000 A)
Measured Parameters
4 voltage inputs for 1 to 600 VTRMS,
CAT III, AC/DC, 0.1% rdg., 256 samples per period, 16 bit ADC 4 current inputs for current sensors, 1 to 600 ATRMS, AC/DC, 256 samples per period, 16 bit ADC Frequency range: 16/2/3, 45 to 65 Hz Phase lock loop standard PQ mode Functions and Conformity
IEC/EN 61000-4-7, harmonic analysis EN 16001, energy management EEE 1159 PQ guideline, events
203 x 300 x 64 mm
systems
Measured Quantities
www.gossenmetrawatt.
com
Ma
in de
Germ a
ny
GOSSEN METRAWATT
40
Table of Contents
+
MAVOWATTI30I40I70
3-Phase Energy and Power Analyzer Advantages: nS imple control per EN50160, EN 61000-4-7 and EN61000-4-15 nS imple handling, automatic detection of electrical system types nA utomatic analysis/evaluation of measurement results in a matter of just seconds nA utomatic report generation with ultramodern PC software nA utomatic setup assistant Applications: The class A device (2008) simultaneously monitors TRMS values, harmonics, icker and transients down to a time range of approximately 80 s. The measuring conguration and the type of electrical circuit is selected automatically based upon detected measured quantities. Acquired data are stored to a CF memory card and can be transferred to DranView for further processing. Technical Data:
n8 measurement outputs, 4 voltage (differential) n4 current (current transformer), for measurement with line nS torage of data to compact ash card nM emory card with up to 32GB nP ower supply: Via charger: 90to 264V/47to63Hz Installed rechargeable battery for up to 3 hours operating time
MAVOWATT 70-400
nF requency range: 50/60 Hz and 400Hz nT esting per military standard 1399
Scope of delivery: Each set includes the mains analyzer of your choice plus a complete set of measurement cables, rechargeable battery and charger, compact ash memory card 4GB, factory calibration certicate, condensed operating instructions, DranView 6 Pro software and carrying pouch. Set 1 Energy and mains analyzer with accessories (see above) + three TR-2500A AC current clamps (10 to 500A) Set 2 Energy and mains analyzer with accessories (see above) + three TR-2510A AC current clamps (1 to 10A) Set 3 Energy and mains analyzer with accessories (see above) + DRANFLEX 3003XL/24 3-phase AC current sensor (30/300/3000A ) + DRANFLEX 3000XL/24 AC current sensor (30 / 300 / 3000A) + ISOFLEX-MHXL mains power pack Set 4 Energy and mains analyzer with accessories (see above) + 4xDRANFLEX 300MH (3/30/300A) with Isoex-MHXL + DranView6 Pro Software + Carrying pouch Article
M817E M817I M817M M817X M817B M817F M817J M817N M817Y
power factor correction and motor quality MAVOWATT 70same as MW 40, plus: nE xpanded mains analysis functions nC haracterization of transients nR apid transient measurement as of 1 s sampling rate with storage of waveform parameters for distorted and asymmetrical systems per IEE1459 nV ector / arithmetic parameters Type
MAVOWATT 30 Set 1 MAVOWATT 30 Set 2 MAVOWATT 30 Set 3 MAVOWATT 30 Set 4 MAVOWATT 40 MAVOWATT 40 Set 1 MAVOWATT 40 Set 2 MAVOWATT 40 Set 3 MAVOWATT 40 Set 4
Type
MAVOWATT 70 MAVOWATT 70 Set 1 MAVOWATT 70 Set 2 MAVOWATT 70 Set 3 MAVOWATT 70 Set 4 MAVOWATT 70-400 MAVOWATT 70-400 Set 1 MAVOWATT 70-400 Set 2 MAVOWATT 70-400 Set 3
Article
M817C M817G M817K M817O M817W M817D M817H M817L M817P
Ma
in de
Germ a
ny
GOSSEN METRAWATT
Table of Contents
41
MAVOWATTI50
Advantages:
Article: M816A
Type
MAVOWATT 50 MAVOWATT 50 Set 1 MAVOWATT 50 Set 2
Article
M816A M816B M816C
as well as in single and 3-phase AC systems. nC omplete power disturbance analysis with simultaneous measurement of all relevant mains quantities nP ower and energy analysis in power supply systems, as well as at the outputs of frequency converters nM ains power monitoring per EN 50160, EN 61000-4-7, /-4-15, /-4-30 nL arge frequency measuring range of up to 1kHz nW orldwide use thanks to broad range variable power pack: 85to250V AC/DC nM easurement and analysis of voltage transients of up to 1.3kV is possible as of a duration of 10s.
logging and analysis of energy consumption, right on up to calculation and static analysis of characteristic voltage quality from power supply systems in accordance with EN50160. It also functions as a test instrument and compares harmonic current generated by electrical equipment, as well as voltage uctuation, with specied limit values. Broadband measurement is laid out for line frequencies of up to 1 kHz, and covers everything from railway power at 162/3 Hz through mains power with 50/60Hz, right on up to onboard electrical systems with 400Hz.
n 8 isolated measuring circuits (4
failures
nR elay output for generating alarms in the
Technical Data:
voltage and 4 current, 100kHz sampling rate) Applications: n4 digital status inputs indicate The spectrum of consumer operating states possible applications n 4 digital control inputs for synchronizranges from ing the measuring interval and the acquisition, display meter input and recording of nC olor touch-screen: 1/4" VGA mains quantities to n U SB ports (PC), external memory MAVOWATTI20 MAVOWATTI30 MAVOWATTI40 n n
Applications/Functions Mains analysis per EN 50160 Voltage quality measuring method Energy / load tests / examinations Extended load disturbance and asymmetry
MAVOWATTI70
MAVOWATTI50
n n n IEC 61000-4-30, IEEE 1159 IEC 61000-4-30 n n n n n 2 16 / 3, 50to60Hz 2 2 2 1000Hz Frequency measuring range 16 /3, 50to60Hz 16 /3, 50to60Hz 16 /3, 50to60Hz MW 70-400 up to 400 Hz n n Errors recording / in-rush n n Motor testing n n n n n Data logging Up to the 50th Harmonic analysis up to the 63rd harmonic n n n n (IEC61000-4-7, IEEE519) harmonic n n n n Flicker per IEC 61000-4-15, IEEE1453 Acquisition of fast transients 80s 80s 1s 10s AnswerModule (motor state, n n capacitance switching, voltage dip) Common Measurement inputs Differential Differential Differential Differential reference n Demand and energy reports Monitoring modes 2 4 7 7 8 Pre, error and post cycles 0 100 10,000 10,000 300 to 3500 Languages 11 11 11 11 3 n Interfaces (USB port, Ethernet) Optional Optional Optional Optional n Frequency converter measurement n Remote control of the instrument
Ma
in de
Germ a
ny
GOSSEN METRAWATT
42
Table of Contents
Accessories: MAVOWATTI20I30I40I70
Type TR-2510B TR-2500B TR-2520B PR150/SP2B PR1500/SP8B PR150/SP1B PR1500/SP7B COMM-RS232 COMM-OEA COMM-OUA 4 mm adapter CFDATA-DB BP-PX5 SCC-4300 DRANFLEX 3000XL DRANFLEX 6000XL METRAFLEX 3001XL METRAFLEX 3003XL Description Current clamp sensor: 1...10 A AC RMS, 40 Hz...5kHz, 15mm dia. Current clamp sensor: 10...500 A AC RMS, 40Hz...5kHz, 50mm dia. Current clamp sensor: 100...3000A AC RMS, 40Hz...5kHz, 72mm dia. Current clamp sensor: 150AAC/DC, 9 V battery operation Current clamp sensor: 1500AAC/DC, 9 V battery operation Current clamp sensor: 150 A AC / DC, operation with power pack (included) Current clamp sensor: 1500A AC / DC, operation with power pack (included) RS 232 adapter including NodeLink software Ethernet adapter including NodeLink software USB adapter including NodeLink software Adapter for current clamps with 4 mm safety plugs Selected compact ash memory card, 4 GB Rechargeable battery pack Carrying pouch for measuring instrument, current clamps and manuals 30/300/3000A, various sensor lengths (e.g. 60cm) 60/600/6000A, various sensor lengths (e.g. 90cm) 30/300/3000A, 60 cm sensor length, without power pack 3-phase, 30/300/3000A, 60cm sensor length, without power pack Article Z817A Z817B Z817C Z817N Z817O Z817P Z817Q Z818A Z818B Z818C Z817T Z818F Z818G Z818H Z817V Z816B Z207H Z207I
Accessories: MAVOWATTI50
www.gossenmetrawatt.
com
Z821B
Z3512A
Z13B
CP30
CP330
CP1100
Type
Description
Applica- Measuring tions Category a, b a, b a, b a, b a, b a, b, (c) a, b, c 600V CAT III 600V CAT IIl 600V CAT III 600V CAT III 600V CAT III
Usable Range 50A20mA 1mA1.2A 0.026A 0.1 16A Low-pass lter f3dB
Output Signal Article 50mV/mA 1000mV/A 50mV/A 10mV/A ~900kHz 0.33 mV/A 1000mV/A 100mV/A 10mV/A 1mV/A Z860A Z861A Z862A Z863A Z865B Z821B Z225A
Plug-in Shunt Resistors Z860A 50W, 0.2%, 1.5W Z861A 1W, 0.2%, 1.5W Z862A 0.05W, 0.2%, 1.5W Z863A 0.01W, 0.2%, 1.5W STP 100K Set (3 pieces) 100kW, 0,2% Current Clamp Sensors Z821B AC, 30Hz5kHz Z3512A AC, switchable: 10Hz 3kHz
64mm 52mm
600 V/CAT II 3...3000 A~ 0.001...1.2A~ 600 V / 0.01...120A~ CAT III 0.1...120A~ 1...1200A~
Ma
in de
Germ a
ny
GOSSEN METRAWATT
Table of Contents
43
Description AC, switchable: 30 ... 500Hz AC/DC, switchable: DC ... 10kHz, with 9V battery (operating hours: approx. 50) AC/DC, switchable: DC ... 20kHz, with 9 V battery (operating hours: approx. 30) AC-/DC, DC...20kHz, with 9 V battery (operating hours: approx. 30) AC/DC, switchable: DC ... 20kHz, with 9V battery (operating hours: approx. 30)
Applica- Measuring tions Category a, (c) b, c b, c b, c b, c 600 V / CAT III 300V / CAT IV 300V / CAT III 300V / CAT III 300V / CAT III
Usable Range 0.5...20A~ 5...200A~ 0.2...40A~/60A ...0.5... 400A~/600A 5 mA ... 30 A 0.5 ... 30 A 5 300 A 0.5 100 A 5 1000 A
Output Signal Article 100mV/A 10mV/A 10mV/A 1mV/A 100mV/A 10mV/A 1mV/A 10mV/A 1 mV/A Z208B Z213B Z201B Z202B Z203B
Flexible AC Current Sensors 10Hz ... 20kHz, METRAFLEX Switchable: with batteries or external 3001 power supply METRAFLEX 3-phase set, switchable: 10Hz ... 20kHz, with batteries 3003 or external power supply
61cm 3x61cm
a, b, c a, b, c
AC, 1000V/CAT III 30A AC, 600V/CAT IV 300A 3000A AC 1000 V/CAT III 30A AC, 300A AC, 600 V/CAT IV 3000A AC
100mV/10 mV/1mV per A Z207F (AC coupled) 100 mV/ 10mV/1mV pro Z207G A (AC coupled)
Absolutely New
n Rugged n Small The METRAFLEX 3000M or the DRANFLEX 300MH assures safe, accurate and exible measurement at bus bars and current distributors. The coil is above all highly suitable for difficult to access, tight spaces.
Feature
Measuring ranges Scaling factor Output sensitivity Accuracy (45to65 Hz) Noise Output connection Power Supply Battery Battery service life External Connection
2ea. AA, MN1500 LR6 alkaline batteries 150hours (MFLEX 3000 M) 80hours (MFLEX 3000MXL) 3.512V DC/max. 100mA 2 3V DC/max. 100mA Barrel connector, 5.5/2.1mm, minus pole inside
Ma
in de
Germ a
ny
GOSSEN METRAWATT
44
Table of Contents
DranView 6 Software
DranView makes it possible for power grid specialists to easily and quickly view and analyze monitored data from the mains. Its very easy to use, includes automated functionality and unites powerful analytical capabilities and adaptable options, in order to fulll the requirements of each and every user. DranView supports more than 12 languages and is being used successfully by thousands of customers all over the world. DranView is available in two different versions, namely Pro and Enterprise. Data collected by MAVOWATT 20, 30, 40, 50 and 70 power disturbance and power analyzers can be evaluated and documented with this extremely versatile and convenient PC software.
nI ntuitive, easy to handle user interface nR otatable axes in graphics, simple dragging and zooming of diagrams nT ime, waveform, amplitude duration and DFT diagrams nR escue kit (data repair) nA utomatic or user-specic report generator dependent upon measurement type nS eparate scaling of harmonics for voltage, current and power nD ata can be exported to ASCII,XLSandXLSX formats
Type
DVP-PX DVE-PX DVP-MW20 DVP-MW20TOPX
Article
Z818D Z818E Z818Q
Scope of delivery:
nD ranView Professional (DVP-PX) including USB hardware dongle nD ranView Enterprise (DVE-PX) including USB hardware dongle
METRAWin/MAVOWATTI20
Data Transmission and Analysis Software for MAVOWATT 50 Saved measurement data from the MAVOWATT 50 energy and power disturbance analyzer can be visualized in various views, analyzed and documented with METRAwin10 / MAVOWATT50 software. Recorded measurement data are transferred from the instrument to a PC with the help of a CF card or a memory stick, and are displayed at a browser. MAVOWATT 50 permits execution of the following functions via the browser:
nR etrieve and display current LCD content nD ownloading of recorded measurement
(e.g. live measured values) per mouse click or cyclically nR emote control of all functions which can be executed via the instruments touch-screen per mouse click in the LCD panel shown in the browser (exceptions: touch-screen settings, network parameters and administrator functions) nD ownloading of measurement and memory proles stored at the instrument for subsequent reuse or transfer to another instrument
The browser can be started from METRAwin10 with the instruments URL address. However, direct communication between the software and the MAVOWATT 50 only takes place via the instruments integrated web server. Recording of live measurement data at the PC is thus not possible.
Ma
in de
Germ a
ny
GOSSEN METRAWATT
Table of Contents
TEStERS
45
TEStERS
Protective measures in electrical systems are intended to prevent bodily injury due to accidents involving electrical current. Of course they also prevent property damage caused by electrical power as well. And thus every electrical system should be checked with our test instruments before initial start-up, and at regular intervals thereafter, in order to assure the effectiveness of installed protective measures. For the most part, this involves testing in accordance with VDE 0100 (IEC 60364), VDE 0105 (EN 50110) and VDE 0113 (EN 60204) regulations. The tests themselves are executed by the instruments strictly in accordance with stipulations set forth in particular by VDE 0413 (EN 61557).
transfer
GOSSEN METRAWATT
46
Table of Contents
PROFITESTIMaster
For testing the effectiveness of safety measures in electrical systems in accordance with DIN VDE 0100600/DIN VDE 0105100 For use in all alternating and 3-phase electrical systems with voltages from 65 to 500V and frequencies of 15.4 to 420Hz
Testers: PROFITESTIMaster
Type
PROFITEST MBASE PROFITEST MTECH PROFITEST MPRO PROFITEST MXTRA
Article
M520M M520O M520N M520P
Advantages: Low-resistance, insulation, earth resistance, standing-surface insulation, loop and line impedance measurements, as well as testing of residual current devices (RCDs)
nC AT IV n DAkkS calibration certicate n Bidirectional data exchange via USB n AMC automatic measurement cable
interchangeable 2/3-pole adapter n Help menu with wiring diagrams n Connection of an RFID reader or barcode scanner n Including ETC software (Electrical Testing Center) n Bidirectional data exchange with DDS-CAD planning software n Free rmware updates with the master updater. Advantage: adaptation to changing standards and expanded functions n Registration at myGMC (www.gossenmetrawatt.com) Advantages (amongst others): u Protection against theft after registering your serial number u Free download of current rmware u Information regarding amendments to standards
Applications: nL oop measurement without tripping the RCD n RCD test with continuously rising ramp n Voltage drop measurement n1 mA varistor response test with insulation measuring voltage up to 1000V nD isplay of approved fuse types for electrical systems nE nergy meter start-up testing n Calculation of cable lengths for common copper wire cross-section nL eakage and equalizing current of up to 1A, as well as working current of up to 150A can be measured with the W Z12C current clamp sensor n Phase sequence measurement (including highest line-to-line voltage) nT esting of special RCCBs with PROFITEST MTECH/MXTRA: selective S, SRCDs, PRCDs (Schukomat, Sidos and others), types A, AC, B, B+, F, G/R nT esting of RCD protection in IT systems nI nsulation measurement with rising voltage n Current measurement with Metraex (option)
PROFITEST MXTRA Functions n Intelligent ramp, simultaneous measurement of breaking current IN and breaking time tA n Testing of IMDs and RCMs n Creation of test sequences (ETC) nB luetooth interface n Earth resistance measurements, amongst others: u Selective earth resistance (4-wire measuring method) u Earth loop resistance (2-clamp method) u Soil resistivity Rho n Leakage current measurement with PRO-AB n Ascertainment of residual voltage per EN 60204 Scope of delivery: n Earthing contact plug insert (PRO-Schuko) n 2-pole measuring adapter and cable for expansion into a 3-pole adapter (PRO-A3-II) nA lligator clips n Set of rechargeable batteries and charger n DAkkS calibration certicate nE TC software nU SB cable
In
cl. Softwar
An overview of the softwares performance features is available on Page 89 of the catalog and on the Internet (see order information for web address). Please refer to the data sheet for further technical specications.
Ma
in de
Germ a
ny
GOSSEN METRAWATT
Table of Contents
47
PROFITEST MBASE MTECH MXTRA MPRO Overview Characteristics /Features RCD measurements UB measurement without tripping the RCCB Tripping time measurement Tripping current measurement Selective, SRCDs, PRCDs, types A, AC, G/R and F AC/DC sensitive RCDs, type B, type B+ Testing of insulation monitoring devices (IMDs) Testing of residual current monitoring devices (RCMs) Testing for N-PE reversal Loop impedance ZL-PE/ZL-N Fuse table for systems without RCDs Without tripping the RCD, fuse table With 15mA test current* without tripping the RCD Earth resistance RE I-U measuring method, mains operation (2/3-wire measuring method via measuring adapter: 2-wire/2-wire + probe) Earth resistance RE (battery operation) 3 or 4-wire measuring method via PRO-RE adapter Soil resistivity rE (battery operation) 4-wire measuring method via PRO-RE adapter Selective earth resistance RE (mains operation) with 2-pole adapter, probe, earth electrode and current clamp sensor (3-wire measuring method) Selective earth resistance RE (battery operation) with probe, earth electrode and current clamp sensor (4-wire measuring method via PRO-RE adapter and current clamp sensor) Earth loop resistance RELOOP (battery operation) with 2 clamps (current clamp sensor direct and current clamp transformer via PRO-RE/2 adapter) Measurement of equipotential bonding RLO Automatic polarity reversal Insulation resistance RISO Variable or rising test voltage (ramp) Voltage measurement UL-N/UL-PE / UN-PE/f Special measurements Leakage current (clamp measurement) IL, IAMP Meter start-up Phase sequence Voltage drop Standing-surface insulation ZST Earth leakage resistance RE(ISO) Leakage current with PRO-AB adapter Residual voltage test Intelligent ramp Features Selectable user interface language Memory (database for up to 50,000 objects) Automatic test sequence function RS 232 port for RFID/scanner USB port for data transmission Bluetooth interface ETC user software for PC Measuring category: CAT III 600V / CAT IV 300V DAkkS calibration n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n
Working Efficiently
The PROFITEST MASTER product range allows for data entry via the RS232 port with the help of a barcode or RFID reader. This unique function assures maximum operating convenience for creating and expanding tree structures (customers, buildings, distributors etc.), searching for designations or IDs, navigating through various modes, creating test texts, inspection and trial tests, creating defects lists and much more. Data processing, measurement and visual inspection can be executed immediately without reconguring plugs or switches the basis for meaningful documentation.
* The so-called live measurement is only advisable if there is no bias current within the system. Only suitable for motor protection switches with small nominal current.
in de
Ma
Germ a
ny
GOSSEN METRAWATT
48
Table of Contents
Testing Packages
Article Accessories PROFITEST MBASE PROFITEST MTECH PROFITEST MXTRA Earth spike SP350 TR50 drum VARIO plug adapter set PRO-RLO II adapter PRO-AB leakage current measuring adapter E-Clip 2 generator clamp for earthing measurements Z3512A clamp for earthing measurements PRO-RE 2 measuring adapter for 2-clamp measuring method F2000 universal carrying pouch Professional case E-CHECK case Rechargeable battery pack Charger Charger M520M M520O M520P GTZ3304000R0001 GTY1040014E34 Z500A Z501P Z502S Z591B Z225A Z502T Z700D Z502W Z502M Z502H Z502P Z502R
M500M n n n n n
M500N n n n n n
M500P n n n n n n n n
M500U n n n n n
M500V n n n n n
M500W n n n n n n
M500X M500Y n n n n n n n n n n n n n n n
TR50 Drum
PROFITESTIS1
Article: GTM5101000R0001
nI nsulation resistance measurements nL ow-resistance measurements at
Simulation Model for Testing the Effectiveness of Safety Measures in Low-Voltage Systems per DIN VDE 0100 This model can be used to simulate TT and TN systems with overcurrent protective devices, as well as with RCDs (systems with overcurrent protective devices can be equipped with normal and selective RCCBs). In combination with the appropriate measuring and test instruments, all measurements and tests can be executed which are stipulated for safety testing of electrical systems of up to 500 V with various system types and protective measures.
Optional accessories:
n S1A-4/10 contact protected jumper
Ma
in de
Germ a
ny
GOSSEN METRAWATT
Pro-Package XTRA
MEDpackage XTRA
E-CHECK Set
Table of Contents
PROFITESTIC
Article: M521A Test Instrument for DIN VDE 0100 / IEC 60364-6 Protective measures test instrument for loop resistance measurement, calculation of short-circuit current and display of suitable fuse ratings. In addition to complete testing for the effectiveness of RCCBs, the instrument is also capable of phase sequence analysis, as well as the measurement of voltage and frequency.
nR ugged 2-component housing with nG o / No-Go indication via LEDs, and
integral impact guard perfect for use by on-site installation teams and an ideal supplement to the PROFITEST 204 in accordance with the new EN 60204 standard. nL arge, illuminated, anti-glare graphic display allows for clear, intuitive, menu-driven operation nQ uick, easy operation with the help of just 5 keys nI ntegrated measured value memory can be read out via the IrDa interface which is included as a standard feature. nT he instrument can always be kept current thanks to the update option. nS torage of measured values with accurate assignment to their respective electrical circuits, distributors and buildings with the alphanumeric keypad
cables, and a recharging socket for NiCd/NiMH batteries Please refer to the data sheet for further technical specications.
PROFITESTI2
Inexpensive, Universal Protective Measure Test Instrument for DIN VDE 0100600/IEC 603646 The PROFITEST 2 provides users with a test instrument for testing the effectiveness of protective measures in electrical systems per DIN VDE 0100600.
nE asy operation n Fast test sequences n AMC automatic measurement cable nC omplete RCD testing (RCD types A and AC) nE arth measurement nP hase sequence indicator nT esting via earthing contact plug or
(PRO-Schuko)
n Cable for expansion into a
3-pole adapter
n 2 alligator clips /
compensation using 4-wire method nL ow-resistance measurement nI nsulation measurement nZ LOOP + IK + fuse type
Languages
Ma
in de
Germ a
ny
GOSSEN METRAWATT
50
TEStERS: Accessories
Table of Contents
SCANBase/SCANWriteIRFID
RFID Reader / Scanner The RFID identication system is used to mark and identify tools and equipment.
Barcode Scanner
Article: Z502F Barcode Scanner with Laser and Coil Cable Laid Out Especially for the Profitest Master Series For identifying system components and equipment. Devices and system components can be logged by the Profitest, and acquired measured values can be allocated to them with the scanner.
nS canning of barcodes from considerable
PROFISCAN ETC
Article: Z502G List with Barcodes, CODE 128, for Use with the Z502F Barcode Scanner and Profitest Master Series Testers
nC reation of system structures and
distributors
nA cquisition of room designations nF unctions for navigating within the
ETC software
METRAFLEX P300
Article: Z502E
Flexible AC current sensor for PROFITEST MASTER nB road range of applications, 3 measuring nH igh levels of safety for the operator, ranges: 3 A,30A,300A AC measuring category: 1000 V @ CAT III, nB road bandwidth of 20Hzto4kHz for 600 V @ CAT IV and unlimited overload harmonic analysis capacity nE asy to use in tight spaces thanks to nA ccurate measurement, even with low small sensor cross-section current values, thanks to large dynamic n9 .9 mm and narrow end-cap (13.6 mm) range and high sensor sensitivity nC urrent sensor with IP 65 protection See Page 28 and Page 43 in the catalog for more exible AC current sensors.
PRO-AB
Article: Z502S PRO-AB Leakage Current Measuring Adapter for PROFITEST MXTRA
nI nput current: 0 to 10 mA nI nput impedance: 1 k 0.5% n Output voltage:
www.gossenmetrawatt.
com
PRO-SCHUKO Article: GTZ3228000R001 Plug insert for Germany and other countries with corresponding plug systems PRO-CH Article: GTZ3225000R001 Plug insert for Switzerland in accordance with SEV PRO-RLO II Article: Z501P Plug inserts for PE and other similar measurements PRO-UNI II Article: Z501R Plug inserts with 3 connector cables for any connection standards
Ma
in de
Germ a
ny
GOSSEN METRAWATT
Table of Contents
51
METRAOHM 413
Article: M630A
nC ompact and rugged for service calls and
Digital Low-Resistance Measuring Instrument for Measuring Protective Conductors, Equipotential Bonding and Much More
nT wo measuring ranges from 0.01 to 1999k,
laboratory use
nO vervoltage protection protects the instrument
in the event of inadvertent connection to mains power nM easuring category: CAT lll 300V/CAT ll 600V nI P 65 protection Scope of delivery: nP lug-in measurement cable n9 V Battery
com www.gossenmetrawatt.
METRISO C
Article: M541A
Battery Powered Insulation Resistance Tester for Measurements in Systems with Nominal Voltages of up to 1000V
nM easurement of insulation resistance
Scope of delivery:
nM easurement cables
and high value ohmic resistance with display of the measured value and the actual measuring voltage nM easurements at bonding and protective conductors with low-resistance measurement nM easurement of touch current nV oltage and frequency measurement nO ptional temperature measurement, measurement of relative humidity nA ll measurements are in compliance with the following regulations: DIN VDE 0100, part 600, DIN VDE 0701-0702, EN 344, EN 1081 - insulation measurement only! nU nambiguous limit value and Go/No-Go indication by means of LEDs, and display of useful information nA ll measurement values are stored to memory with reference to their respective electrical circuit designations nR ugged 2-component housing for everyday use Function Insulation resistance RISO Resistance RLO Voltage UISO/U~ Touch current IB
Measuring Range
Ma
in de
Germ a
ny
GOSSEN METRAWATT
52
Table of Contents
METRISO 1000A
Insulation Measuring Instrument for Electrical Systems with Warning in Case of Dangerous Touch Voltage Metriso 1000 A Display Insulation measuring voltage Insulation measuring range RLO measuring ranges Limit value signals Article Analog 501002505001000V 400 M 4 Indicator lamp M540C
METRISO 1000A
METRISO G500MM/G500/G1000/G1000+
Insulation and Low Resistance Measuring Instruments
METRISO G500MM
METRISO G1000A
METRISO G500
METRISO G1000+
METRISO G1000 Type Display Measuring voltage Measuring range Polarization index, PI/DAR Low-resistance measurement Voltage measurement Article number
in de
Metriso G500MM LCD 50 to 500V (50, 100, 250, 500) 10k ... 100G
Metriso G500 LCD 50 to 500V (50, 100, 250, 500) 10k ... 100G
Metriso G1000 LCD 50 to 1000V (50, 100, 250, 500, 1000) 10k ... 200G 0.17 10 10V 1000 V M550C
Metriso G1000+
Metriso G1000A
LCD Analog 50 to 1000V 50 to 1000V (50, 100, 250, 500, (50, 100, 250, 500, 1000) 1000) 10k ... 1T 10k ... 1T
n
10V 500V
M550E
Ma
Germ a
ny
GOSSEN METRAWATT
Table of Contents
53
Set Article
Accessories
Z550A Z550C
n n
n n
n n
n n
n n
METRISO 5024
Article: M540E
nL ow-resistance measurements for
www.gossenmetrawatt.
protective conductor and equipotential bonding conductor resistance, and continuity nB uzzer and blinking LED indicate alarm status for erroneous and implausible measurements nF luttering pointer as last-resort warning function Measuring Current Short-Circuit Current
com
Analog Insulation Measuring Instrument, Low-Resistance Measuring Instrument and Voltmeter with Buzzer for Quick, Two-Hand Operation
nE rgonomic handling nI lluminated scale nI nsulation measurement with 100, 250
Scope of delivery: nI nsulation measuring instrument, ohmmeter and voltmeter nC arrying pouch
Overload
Insulation measurement, measuring voltage: 100 / 250 / 500 V 0.1...400M 2.5% 600V AC >1mA <10mA Measuring error under reference conditions relative to scale length (l = 84.6mm) Low resistance measurement, measuring voltage: 4.5 V 0...4 2.5% 250V DC >200mA Measuring error under reference conditions relative to upper range value (l = 74.9mm) Voltage measurement, DC / AC (40 ... 200 Hz) 0 ... 500V 2.5% 600V AC 450k Measuring error under reference conditions relative to scale length (l = 73.3mm)
Ma
in de
Germ a
ny
GOSSEN METRAWATT
54
Table of Contents
ME
METRISO 5000A
Article: M580A
TR
ISO
High-Voltage Insulation Measuring Instruments with Test Voltage of up to 5000V DC For non-destructive measure ment of insulation resistance in electrical systems, as well as at machines, transformers, cables and electrical equipment utilized in, for example, locomotives, street cars and ocean going vessels, with selectable test voltages of up to 5kV.
50
00 A /
Analog High-Voltage Insulation Measuring Instrument with Permanently Connected Measurement Cables and Test Probes METRISO 5000AK: The battery powered METRISO 5000 A is converted into the muscle powered METRISO 5000AK by replacing the battery module with a crank generator.
nE xtensive measuring range: 10k...1T nM easuring range: 100k...100M (1000V) nM easuring voltages:100V, 250V, 500V,
M E
TR
ISO
50
00 D-
PI
nM easurements to 1000V per DIN VDE 0413 n Voltage measurement to 1000V nC oncise logarithmic display nG uard terminal for the elimination of surface current
Scope of delivery: METRISO 5000A (580A) nW ith battery module: METRISO 5000AK (580C) nW ith crank generator Both with 5 KV alligator clips KY 5000A METRISO 5000A-Set (M580S)/ METRISO 5000AK-Set (M580T) nK Y 5000A nG UARD 5000A nU niversal carrying pouch F2000
ISO KALIBRATOR 1
Article: M662A Please refer to the data sheet for further technical specications.
Test Adapter for Insulation Measuring Instruments and Ohmmeters Adapter for rapid, efficient testing of the accuracy of measuring instruments for insulation resistance and low-value resistors. Insulation measuring instruments with nominal voltages of up to 1000 V can be tested with the ISO Calibrator 1.
nT est range: 100k to 100M nP rotection: n Usable with following instruments:
Ma
in de
Germ a
ny
GOSSEN METRAWATT
Table of Contents
55
METRISO 5000D-PI
Article: M5810
Digital High-Voltage Insulation Measuring Instrument with Test Voltage of up to 5000V DC Voltage measurement to 1000V Testing for absence of voltage at the device under test in systems of up to 1kV can be performed with the voltage measuring range. Discharging Capacitive Devices Under Test Capacitive devices under test such as cables and coils, which may be charged with test voltage, are discharged by the measuring instrument. The falling voltage value can be observed at the display. Measurements in Accordance with EN61557, DIN VDE 0413 Nominal current amounts to 1mA at a test voltage of 100, 250, 500 or 1000V. Highly Insulated Measuring Cables The highly insulated measuring cables are permanently connected for safety reasons in order to avoid danger resulting from an inadvertently disconnected cable. Polarization Index PI Polarization index testing is recommended for electrical machines. This procedure involves expanded testing of insulation resistance. DC measuring voltage from the METRISO 5000D-PI is applied to the insulation for a duration of 10 minutes. The measured value is documented after one minute, and after ten minutes. If the insulation is defective, the value measured after ten minutes is higher than the value measured after one minute. The relationship between the two measurement values is the polarization index. Charged material within the insulation is aligned due to the application of measuring voltage over a long period of time, resulting in polarization. The polarization index indicates whether or not the charged material contained in the insulation can still be moved, thus allowing for polarization. This, in turn, is an indication of the condition of the insulation.
nE xtensive measuring range:
Scope of delivery: nB asic instrument with permanently connected measurement cables and test probes nA lligator clips (5kV version) nR echargeable battery (for M5810-0001 only) /mains power cable n5m extension cable/interface cable Please refer to the data sheet for further technical specications.
0.4M ...1T
100V, 250V, 500V, 1kV, 1.5kV, 2kV, 2.5kV, 5kV nP olarization index and absorption ratio nV oltage measurement to 1000V nF requency measurement: 15Hzto1kHz nC apacitance measurement: 0.1...5F nM easurement of electrical discharge nG uard terminal for the elimination of surface current nS upply power from mains, battery pack or external 12V power supply nB acklit dot matrix display nD igital display of measured values and limit values nT imer function: 1s...100min. Incl. DAkkS
Calibration Certicate
Generator 5000A
Article: Z580A Crank Generator for Metriso 5000 A The battery powered METRISO 5000A is converted into the muscle powered METRISO 5000 AK by replacing the battery pack with a crank generator.
KY 5000A
Article: Z580B Alligator clips, 5 kV version
www.gossenmetrawatt.
com
in de
Ma
Germ a
ny
GOSSEN METRAWATT
56
Table of Contents
GEOHM C
Article: M590A
nM easurement of earth resistance in 5
ranges to 50kW
measurement of earth resistance for 3 or 4-wire connection nC ontinuous monitoring of interference voltage, as well as auxiliary earth electrode and probe resistance with indication if allowable limit values are violated nC omplete display of all required values at a large dot matrix display, or warning with 4 LEDs. Easy concise operation with only 4 keys.
nV oltage measurement: 10to 250V nF requency measurement: 45to200Hz nB attery monitoring and self-test nI ntegrated memory with IrDA interface nE arth tester per DIN VDE 0413 nE xtremely rugged 2-component housing
GEOHM 5
Article: M591B
Earth Tester for All Known Measuring Methods This battery powered measuring instrument can also be used to ascertain or measure soil resistivity and ohmic resistance in accordance with the current-voltage measuring method. Easy concise operation with only 4 keys.
nM easurement of: u Earth resistance u Selective earth resistance u Soil resistivity uC urrent (TRMS) via clamp meter
com www.gossenmetrawatt.
Please refer to the data sheet for further technical specications.
Scope of delivery: nB lack test cable, 4.5 meters nG reen test cable, 4.5 meters nR ed test cable, 15 meters nB lue test cable, 20 meters n4 earth spikes n4 batteries per LR14 nC arrying strap nS tackable system case Optional accessories:
nB attery charger with 4 batteries n LINK-G software Z591D
(optional) nC onventional 3 and 4-pole measurement nS elective single-clamp measurement (optional) n2 -clamp measurement (optional) nB attery operation is possible (optional) nD igital display nR ugged housing nN o balancing required nC ontinuous monitoring of interference voltage and auxiliary earth electrode resistance with indication when allowable limit values are exceeded nD ata storage for 250 measurements (1000 measured values) nD ata interface for transmission of measured values to a PC
Z591C
Ma
in de
Germ a
ny
GOSSEN METRAWATT
Table of Contents
TEStERS: Accessories
57
E-Set 3
Article: GTZ3301005R0001 Set of measuring accessories for measurements with earth spikes. Measuring accessories set consisting of: n2 reels n2 measurement cables, 25m each n1 measurement cable, 40m long n2 measurement cables, 3m each n4 earth spikes (zinc plated) n 2 spike pullers n1 hammer
E-Set 4
Article: Z590A Set of measuring accessories for earth measurements, same as E-Set 3 but with earth drills instead of spikes. Measuring accessories set consisting of: n2 reels n2 measurement cables, 25m each n1 measurement cable, 40m long n2 measurement cables, 3m each n4 earth drills Usable with following instruments: GEOHM C, GEOHM 5, PROFITEST MXTRA/MPRO*
E-Set 5
Article: Z590B Extensively equipped earth measurement case for device and accessories. Earth measurement case consisting of: n 1 imitation leather case n 1 drum with 25 m measurement cable n 2 drums with 50 m measurement cable each n 3 measurement cables, 0.5 m each n 1 measurement cable, 2 m long n 1 test clamp n 4 earth drills, 350 mm long n1 dust cloth n 2 pads with forms Usable with following instruments: GEOHM C, GEOHM 5, PROFITEST MXTRA/MPRO*
E-ClipI1/E-ClipI2
E-Clip 1 Clamp Meter: 1mAto1200A, 1mA/A, 40Hz5kHz, 52mmdia. n Measuring range: 1mAto1200A (Z591A) n Measuring category: 600V CATIII n Cable diameter: 52 mm n Transformation ratio: 1000A/1A n Frequency range: 40Hzto5kHz n Output signal: 1Ato1.2A nS cope of delivery: clamp meter with connector cable (1.5m) and laboratory safety plug E-Clip 2 Generator Clamp: 0.2to1200A, 1mA/A, 40Hz 5kHz, 52mmdia. Same as E-Clip 1, but: (Z591B) n Measuring range: 0.2 Ato 1200A n Output signal: 0.2mAto1.2A nS cope of delivery: Generator clamp with laboratory safety plug inputs
E-Clip
Ma
Germ a
ny
GOSSEN METRAWATT
58
TEStERS: Accessories
Table of Contents
CEE outlet with appropriate nominal current nF or 16 A nominal current: A3-16, 32A: A3-32, 63 A: A3-63 nP hase sequence testing with signal lamps nT esting the effectiveness of safety measures with ve 4mm contact protected sockets
nA 3-16 (GTZ3602000R0001) nA 3-32 (GTZ3603000R0001) nA 3-63 (GTZ3604000R0001)
with 4 mm sockets
Z3512A
current clamp sensor, 0.1/1/10/100/1000A AC, switchable nW Z12C (Z219C): Current clamp sensor,1mAto15A AC, 1mV/mA, 1Ato150A AC, 1mV/A, switchable
Measurement cable
TR25 (GTZ3303000R0001) Reel with 25m measurement cable. Cable ends are equipped with banana plugs. TR50 (GTY1040014E34) Metal drum with 50m measurement cable. One end of the cable is integrated into the drum as a socket, and the other is equipped with a banana plug. The drum axle can be inserted with a single action.
TR50 TR25
Z502Z
series (Z502H): 8 rechargeableNiMH eneloop batteries nC hargers for Z502H battery set (Z502P) for PROFITEST MTECH/ MBASE Z502R for PROFITEST MXTRA/MPRO/ METRISO G1000+
Z502H
Ma
Germ a
ny
GOSSEN METRAWATT
Table of Contents
TEStERS: Accessories
59
T/F Sensor
Article: Z541A
Adapter for temperature and atmospheric humidity measurement with infrared interface to the measuring instrument. For determining ambient temperature and atmospheric humidity during oor measurements including:
n Leakage, insulation and
Article: Z500A Three self-retaining, contact protected test probes for the connection of measurement cables with 4mm banana plugs, or with contact protected plugs for sockets with an opening of 3.5mm to 12mm, e.g. CEE, Perilex sockets. For example, the test probes also t the square PE jacks on Perilex sockets. Maximum allowable operating voltage: 600V per IEC 61010.
surface resistance n Temperature range: -10to+50C n Relative humidity measuring range: 10to90%
Article: GTZ3196000R0001 Floor Probe This metallic tripod-type measurement electrode is used for: nD etermination of electrical resistance at elastic oor coverings in accordance with EN 1081 nR esistance measurement for insulating oors and walls in accordance with DINVDE 0100600
1081 Probe
Telearm 1
Article: GTZ3232000R0001
E-CHECK-Set
Article: M500U
Telescoping rod with test probe, and with a socket in the handle for quick and safe testing of, for example, lamps installed at excessive heights for the measurement of protective conductor resistance. The rod is 53cm long and can be telescoped to a working length of 120cm and locked into place. Max. allowable voltage to earth: 1000V. Carrying pouches F2000 HC30-C HC40
Ever-Ready Case
nP rotest MTECH (M520O) nV ARIO plug adapter set (Z500A) nW riting pad
E-CHECK case (Z502M): Printed with contents layout. Optional: trolley (Z502N): Suitable for E-CHECK case
Description Universal carrying pouch for measuring and test instruments, as well as accessories, dimensions: 380 x 310 x 200mm Hard case for series C testers and accessories, dimensions: 394 x 294 x 106mm Hard case for 2 series C testers and accessories, dimensions: 450 x 361 x 140mm Ever-ready case for PROFITEST MASTER with external pockets for accessories
HC30-C/ HC40
in o
F2000
ur p New rodu ct
EverReady Case
rang e
IrDa-USB Converter
Article: Z501J Interface Adapter for Connecting a Test Instrument to a PC (IrDA-USB) Electrically isolated infrared interface for data transmission between the test instrument and a PC (USB).
nS cope of delivery: CD ROM with
interface drivers
interface drivers
com www.gossenmetrawatt.
Ma
in de
Germ a
ny
GOSSEN METRAWATT
60
Table of Contents
PROFITEST I204+/204L+
Article: GTM5027000R0001/M505C
Tester for DIN VDE 0113, EN 60204-1 Portable test instrument for measurements per EN 60204, DIN VDE 0113 and similar regulations for machines and their electrical systems, with measured value storage and report generation. Measuring instrument for:
nP rotective conductor measurement nI nsulation measurement nR esidual voltage measurement nT ouch current
Scope of delivery for PROFITEST 204+: n 1 test probe with integrated control unit for remote control of functions for protective conductor and insulation resistance measurement with permanently connected Please refer to the data sheet for measurement cable further technical specications. n 1 test probe with integrated fuse and permanently connected measurement cable Incl. Factory n 1 cable lug Calibration Certicate n Mains power cable with earthing contact plug n 1 factory calibration certicate
n 1 RS 232 bus cable for connection to the COM port PROFITEST 204L+: Same as PROFiTEST 204, but: n With permanently connected 12 meter measurement cable n With Start/Store function activation in the test plug
Ma
in de
Germ a
ny
GOSSEN METRAWATT
Table of Contents
TEStERS: Accessories
61
Combination signal lamp on a magnetic base plate for high-voltage tests in accordance with DIN VDE 0104
nC able lug 204 (Z504E):
Trolley for basic instrument combined with high-voltage module, includes cover with side pockets
nC laim 204 (Z504G): et of various items used to warn S
Adapter for PE and ISO tests plug-on cable lug for secure attachment of the test probe to terminals
nL eadex 204 (Z504C):
Interface adapter cable for connecting the RS 232 port at the test instrument to the USB port of a PC for transferring data between the PC and the test instrument, e.g. for software updates
nF 2000 (Z700D):
12 meter extension for the measurement cable with test probe to which the measuring circuit fuse is installed
unauthorized persons and for securing large areas, machines or machine components during the performance of high-voltage testing.
Signal 204
F2000
Caddy 204
ProfiTestI204HP/2,5kV, ProfiTestI204HV/5,4kV
High-Voltage Module for Connection to the PROFITEST 204+ PROFITEST 204 HP-2.5 (M505A) 2kV high-voltage module for connection to the PROFITEST 204+ and expanded measuring options for high-voltage testing with 2 x UN or 1000V, from 500 VA transformer (max. 700VA). Adjustable high-voltage: 1000to 2000V. PROFITEST 204 HV-5.4 (M505B) 5kV high-voltage module for connection to the PROFITEST 204+ and expanded measuring options for high-voltage testing for EN 60439 and similar regulations. Adjustable high-voltage: 1000to 5000V (max. 100VA).
Article:M702G Article:GTM5016000R0001 for PROFITEST I204+/204L+ and METRISO 5000D-PI The SECUTEST SI / SECUTEST PSI serves strictly as an input device for the PROFITEST 204+ and the METRISO 5000D-PI. With the help of the SECUTEST PSI, test results can be printed out in the form of documented reports with date and time.
Ma
in de
SECUTestISI+ SECUTestIPSI
Germ a
ny
GOSSEN METRAWATT
62
PhotovoltaicS
Table of Contents
PROFITEST IPV
Article: M360A Peak Power Measuring Instrument and Curve Tracer for PV Modules and Strings
The PROFITEST PV allows for the measurement of characteristic IU curves, as well as individual photovoltaic modules and strings.
Generator voltage up to 1000 V DC, current up to 20 A DC Measurement of short-circuit current ISC, open-circuit voltage UOC, Separate measurement of temperatures at the irradiation sensor
instantaneous peak power of a solar cell Pmax, internal series resistance RS, measurement of internal parallel resistance RP Automatic conversion of momentary measured values to STC Patented calculation process for evaluating PV generators without knowledge of the manufacturers specications Patented calculation process for determining the generators internal series resistance based solely on a single characteristic IUcurve
(1000V / 32 A DC) for all-pole disconnection of the measuring instrument from the PV generator Calibrated irradiation sensor in accordance with IEC/EN 60904-2 with integrated Pt1000 temperature sensor Integrated customer/module database with bidirectional data exchange Software for Graphic Representation, Evaluation and Documentation with Integrated Database / PV Analyzer Scope of delivery for PROFITEST PV n Irradiation sensor with integrated Pt1000 temperature sensor, 10 m n External safety disconnector, 1000 V / 32 A n 4-wire measurement cable set, 10 m n Pt100 PV surface sensor n External power pack
PV Analyzer
The database software offers effective support for testing and documentation. Its been specially developed for use in the eld of photovoltaics and allows for graphic representation and analysis of measurement results. PV Analyzer includes the following functions and more: n Read-in measured characteristic curve values from the PROFiTEST-PV n Export of measured values or results (e.g. as XLS le) n Generation of a test report (e.g. as a PDF le) n Online measurement graphic representation of the characteristics curve and measured values (also suitable for continuous measurement) n Online access to the database / data management in the PROFiTEST-PV n Representation of measured and calculated values under STCs n Overview of characteristic IU curves for a given test series in browser window n Module database (approx. 40,000 modules) n Analysis function: evaluation of measured values acquired under STCs (error interpretation).
Ma
in de
Germ a
ny
GOSSEN METRAWATT
Table of Contents
PhotovoltaicS
63
MC3-MC4
nP V adapter set (Z360J):
TYCO-MC4
25 meter connection
PROFITEST IPVSUN
Article: M360C
Test Instrument for Testing PV Modules and Strings per DIN EN 62446 (VDE 0126-23)
Voltage measurement: 0...1.000VDC Current measurement (direct): Ground fault measurement: Compact and rugged Weight: just 500 g Extensive accessories
0...20ADC Insulation resistance measurement Measuring range: 0...20M Test voltages: 250V,500V,1.000VDC
0...1.000VDC Testing for protective conductor continuity: 0...10/>200mA Polarity test Backlit LCD panel
Scope of Delivery
n n n n n n n n
1 PROFITEST PVsun tester 4 batteries, 1.5 V IEC LR6 (AA) 3 safety measurement cables, 1.5m, red, blue and yellow 1 Solar plug adapter to MC3 and MC4 1 plug-on safety test probe with socket 1 plug-on safety alligator clip with socket 1 carrying case with foam insert 1 set of operating instructions
Ma
in de
Germ a
ny
GOSSEN METRAWATT
64
TEStERS: METRALINE
Table of Contents
METRALINE IZCHECK
The test instrument is used to measure earth-fault loop impedances and line impedance. The measuring range of 0 to 200 (0.27 to 200 per VDE0413 /EN61557) allows for calculation of short-circuit current from 0 to 23 kA. The METRALINE Zcheck allows for the evaluation of measured impedance in consideration of type, nominal current and disconnection time. A table with the parameters of various protective devices is included in device memory. The following measurements can be performed with the METRALINE Zcheck: Fault loop impedance with short-circuit current Measurement Results Fault loop impedance with short-circuit current without tripping the RCD Line impedance with short-circuit current Line voltage Phase detection Phase Detection (L) Features Table of common protective devices can be displayed Digital display, backlit color OLED display, switching between brief and detailed representation LED for measurement point illumination Table Display Patented means of securing test probes Compact and rugged
METRALINE IRCDCHECK
www.gossenmetrawatt.
com
Touch voltage
Time to trip
tripping current
Testing of RCDs, IDN = 10, 30, 100, 300 und 500 mA Testing of RCDs with IN, 1 IN, 2 IN,
Tripping current
for determining time to trip and tripping current Testing of special RCDs, selective S , type AC, type A, type F Measurement of line voltage and fault loop impedance
OLED = light emitting diode (LED) made of organic semiconductive materials. The great advantage of this component is its high contrast, which makes it especially suitable for measuring instruments.
in de
Ma
Germ a
ny
GOSSEN METRAWATT
Table of Contents
65
Article: M507C Insulation Resistance Measurement The test instrument allows for the measurement of insulation resistance with test voltages between 50 and 1000 V in accordance with VDE0413-1,-2 (EN 61557-1,-2). The measuring range is 100 k to 1 G.
Measurement of insulation resistance at voltage-free
METRALINE IISOCHECK
Ramp Function
Measurement Results
variant
Checking of test objects for absence of voltage Insulation resistance measurement with test voltage from 50 to 1000 V Voltage measurement to 600 V Table Display Measurement of surge protection devices with test voltage from 50 to 1000 V Table of common varistors can be displayed Digital display, backlit color OLED display Indication of dangerous touch voltage Type Description LED for measurement point illumination Loop Resistance Measuring Patented means of securing test probes Metraline Zcheck Instrument Compact and rugged check Metraline RCD T esting of RCCBs For service calls under harsh conditions and laboratory use
Metraline ISOcheck Scope of delivery: n 1 test instrument with mobile test probe n 4 batteries (AAA) n 1 carrying pouch n 1 set of condensed operating instructions n 1 CD-ROM with operating instructions in available languages n 1 factory calibration certicate
Optional Accessories Broad-range charger for charging batteries Input: 90 to 265 V AC Output: 9.5 V DC, 180 mA 4 rechargeable batteries (AAA)
METRATHERM|1
com www.gossenmetrawatt.
Article: M680A
Contactless Infrared Thermometer with Laser Pointer and Data Logger Software for Temperature Measurement at a Safe Distance from the Danger Zone For repairs and maintenance work in the automotive industry and in air conditioners, scientic experiments, manufacturing processes in the eld of semiconductor technology, contacts in electrical control cabinets, food monitoring and processing
nI nfrared temperature measuring range: nS torage of currently measured tempera-
-50to1000 C (-58to1832F) nE xact positioning with activatable laser beam nH igh distance-to-spot size ratio (D:S) of 50:1 nE missivity adjustable from 0.1 to 1.00 in steps of 0.01 nA dditional contact measurements with type K thermocouple nI ndividual/continuous measurement, 10memory locations for individual measurements
ture, lowest and highest temperature or maximum temperature difference T nU SB port for data transmission to a PC nS oftware for displaying and recording measured values (data logger) Scope of delivery:
nC arrying strap nT ype K thermocouple nU SB adapter cable n9 V battery per 6LR61 nC D ROM with installation program for PC
Ma
Germ a
ny
GOSSEN METRAWATT
66
Table of Contents
PhaseCopI2
Article: GTM5202000R0001
nN ominal range of use:
Phase Sequence Indicator with LEDs and Contact Protected Plugs Instrument for determining direction of rotation and phase sequence in three-phase systems Phase sequence is acquired by means of an electronic circuit. The direction of rotation is indicated by one of two directional arrows, each of which is equipped with an LED. An LED is provided for each phase which indicates whether or not the phase conductor is live. The device can be used in all low-voltage systems.
nC omplies with DIN VDE 0413-7 /
Optional accessories:
DUSPOL
EN 61243-3 (DIN VDE 0682-401) DUSPOL Voltage and Continuity Tester nD ata Hold/measuring point illumination nD irect display without key activation high impedance testing nI mpact resistant housing with IP 64 protection against dust and water
DUSPOL digital LC
DUSPOL expert
EN 61243-3 Display Measuring category Display levels Continuity test Phase sequence test Single-pole phase test Polarity test Load switched via pushbutton 30 mA RCCB tripping via pushbutton Vibration alarm Measuring point illumination Protection Article
in de
DUSPOL digital LC LED/LCD CAT IV 6 to 750V Buzzer +LCD, 200k LCD LCD LCD Is=200mA (750VDC)
n n
DUSPOL analog plus Moving coil / LED CAT IV 12 to 690V LCD LCD LED Is=250mA (750VDC)
n n
DUSPOL expert LED / LCD CAT IV 12 to 690V Buzzer +LED, 108k LCD LCD LED Is=200mA (750VDC)
n n
LED IP 64 M611A
IP 64 M611B
LED IP 64 M611C
Ma
Germ a
ny
GOSSEN METRAWATT
Table of Contents
67
MetraPhaseI1
Article: M620A in accordance with the regulations, as is nominal line voltage. The phase sequence indicator can be used as a 3-pole or a 2-pole indicator.
nC omplies with DIN VDE 0413-7/EN
Phase Sequence Indicator with Electronic Rotary Dial, Frequency Display and Nominal Line Voltage Display Complies with Safety Regulations The mechanical rotary dial based upon the Ferraris principle preferred by many users necessitates a large housing for the respective clearances and creepage distances. Our phase sequence indicator has an electronic rotary dial. LEDs arranged in a circular array not only indicate the direction of rotation, but rather line frequency as well by means of LEDs which light up in various colors. The presence of voltage at each phase is indicated with additional LEDs
61557-7
as well as nominal line frequency and voltage nN ominal range of use: 100to690V/50to400Hz nP ower supply: 4 ea. mignon cell per IECLR 6
Scope of delivery: n3 plug-in measurement cables with contactprotected plugs n3 plug-on test probes n1 alligator clip n4 batteries n Carrying case Optional accessories: n GH18 (GTZ3212000R0001): Rubber holster n Vario plug adapter set (Z500A): 3.5to12mm diameter
ProfiSafe 400/690
EN 61243-3 (DIN VDE 0682-401) Rugged Voltage, Phase, Continuity, Polarity Tester and Phase Sequence Indicator for up to 400 or 690 V in accordance with EN 61243-3 (VDE0682401)
nD ouble indication reliability nI ndividually tested for dielectric strength
METRAVOLT 7A
EN 61243-3 (DIN VDE 0682-401) Voltage Tester with Indication of Phase, Polarity and Direction of Rotation
METRAVOLT 12D+L
EN 61243-3 (DIN VDE 0682-401) Voltage Tester with Indication of Phase, Polarity and Direction of Rotation
nL arge backlit display
EN 61243-3 Nominal voltage Measuring category Protection Dielectric strength Display levels Input impedance Continuity test Frequency Range Current Display Power supply Functions Article
Metravolt 12D+L
> 5kV, test voltage: 5kV (1.2/50ms pulse wave) 12/24/50/ 12/24/50/ 120/230/ 400V 120/230/400/690V 117k 202k 1M/57k 311k 0500k 0500k 010k 02000Hz 02000Hz 0100Hz 1510,000Hz 3.4mA 3.4mA 0.6 ... 13mA 3.2mA Measuring movement LEDs LEDs LCD (backlit)+LEDs +LCD+LED Rechargeable Li battery Rechargeable Li battery None 9 V block battery with solar cell with solar cell Voltage testing and measurement plus phase, continuity, polarity and phase sequence indicator M630E M630F M630D M630G
Ma
in de
81000V AC/1500V DC CAT IV IP 65 10kV, test voltage: 6kV (1.2/50ms pulse wave)
Germ a
ny
GOSSEN METRAWATT
68
Table of Contents
com www.gossenmetrawatt.
Technical Data
METRACLIP 41
METRACLIP 410
METRACLIP 61
METRACLIP 62
Article
M320A
M320B
M311D Digital leakage current clamp, DATA HOLD and maximum/minimum display.
M311F Current clamp for measuring leakage and charging current. Leakage current clamp meter with specially shielded clamp opening for protection against external inuences. 18 III/300 digital 200m AC TRMS/DC 2000m AC TRMS/DC 10AC TRMS/DC 100 A / 1 mA / 0.01 A 50 to 60 2kHz cut-off frequency Min/Max; DATA HOLD 1% 3/5 /10 digits 2ea. LR6 (AA) 76 x 194 x 30 0.35kg
Description
Electrical safety per IEC Electrical safety per IEC 61010. 61010. HOLD function. HOLD function Suitable for measuring 4 to 20 mA process signals
Clamp opening (mm) CAT/Vmax (V) Display, digits Current (A) Resolution Voltage (V) Frequency range for U / I (Hz) Peak memory Frequency measurement (Hz) Continuity Resistance (Ohms) Active power (W) Power factor Accuracy Power supply Dimensions (mm) Weight with battery
25 III/300 digital 5mAto40A TRMS (AC+DC) 1 mA / 10 mA 15 to 400 DATA HOLD 1% rdg. 5 digits 9V block 75 x 190 x 30 0.235kg
25 III/300 digital 100mAto400A TRMS (AC+DC) 10 mA / 100 mA 15 to 400 DATA HOLD 1% rdg. 5 digits 9V block 75 x 190 x 30 0.235kg
40 III/300 digital+bar 00.3/0300AC 0.01 mA / 0.01 A 50 to 60 DATA HOLD (1.2%+5d) (-5%5d) 2 ea. LR44/SR44 64 x 176 x 23 0.125 kg
Included Accessories
Ma
in de
Germ a
ny
GOSSEN METRAWATT
Table of Contents
69
METRACLIP 63
METRACLIP 64
METRACLIP 70
METRACLIP 72
METRACLIP 75
M311G
M311H
M312A Clamp meter with 4-place digital display. Automatic or manual measuring range selection, DATA HOLD and maximum/minimum display.
M312E
M312H
Milliampere current clamps for measuring leakage current and process signal current (4 to 20 mA). The milliampere current clamp is extremely well suited for measuring small DC and AC current values beginning with 1mA. Its equipped with a power saving circuit, an analog interface, indication of exceeded measuring ranges and a exible current sensor, and can even be used under very unfavorable mechanical conditions. 5 II/600III/300 30 II/600III/300
Digital clamp multimeter with multimeter functions: Direct and alternating voltage measurement, continuity test, buzzer, resistance, overvoltage category: CATIII@600V, IP 40 protection, Frequency measurement, Temperature measurement phase sequence 26 26 III/600 ... IV/300 4000 0.2to400 DC/AC RMS 600 A pk III/600 ... IV/300 4000 0.1to200 AC RMS, 0.2to600 DC/AC RMS
42 III/600 digital 0.2 to 1400 DC 0.2to1000 AC RMS 100 mA / 1 A 0.2 to 600 DC 0.4to600 AC 45 to 450 Min/Max; DATA HOLD ...4k Acoustic 0.5to6M 2%10 digits 9 V, IEC 6 LR61 97x254x46mm 0.6kg Battery, carrying pouch, 2 measurement cables with test probes
digital digital 100m/1000m DC 100 m/1000m DC 100 m/1000m AC 100 m/1000m AC 10AC 10AC 0.01 mA / 0.1 mA / 0.001 mA 50 to 60 DATA HOLD 1%10 digits 4ea. LR6 (AA) 19 x 113 x 28 0.28kg 50 to 60 DATA HOLD 1%10 digits 4ea. LR6 (AA) 33 x 170 x 24 0.28kg
10 mA / 100 mA / 1 A 0.2to600 DC/AC RMS 0.2to600 DC/AC RMS 900 V pk 900 V pk 45 to 65 Min/Max; DATA HOLD Peak 0.01Hz...20kHz Acoustic ...400 0.040k 240kW 0.2 ... 1.00 1%+2 digits 9 V, IEC 6 LF22 70x193x37mm 0.26kg 45 to 65 Min/Max; DATA HOLD; PEAK Acoustic ...400 0.54k 1%+2 digits 9 V, IEC 6 LF22 70x193x37mm 0.26kg
Battery, 2 measurement Battery, 2 measurement cables with contactcables with contactprotected plugs and test protected plugs and test probe, probe, 1 adapter for type K 1 alligator clip, pouch with thermocouple, pouch with carrying strap carrying strap
in de
Ma
Germ a
ny
GOSSEN METRAWATT
70
Table of Contents
5000D-PI
GEOHM C
MXTRA
Modules, Adapters, Plugs, Plug Inserts, Cable Sets S1 SECUTEST SI+/PSI A3-16 A3-32 A3-63 3-pole adapter Vario plug Telearm1 TR25 TR50 SP350 KS24 KS-C Z502Z PRO-Schuko PRO-CH PRO-RSA PRO-A3 II PRO-RE PRO-RE 2 PRO-RLO II PRO-UNI II Z550A IrDa-USB RS 232 USB Z580A KY 5000A Guard 5000A Leadex 5000 Simulation model per DIN VDE 0100 Module (printer, memory, RS 232 interface) 3-phase adapter 5-pole for 32A n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n GTM5101000R0001 M702G/ GTM5016000R0001 n GTZ3602000R001 n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n GTZ3603000R001 GTZ3604000R001 Z521A, B, C Z500A GTZ3303000R0001 GTY1040014E34 GTZ3304000R0001 Z541F Z502Z
CEE outlets CEE outlets 3-phase adapter 5-pole for 63A CEE outlets
3-phase adapter 5-pole for 16A 3-phase measuring adapter for Schuko plug or CH, UK Plug set, 3.5...12mm dia. (3 pcs.) Telescoping rod for PE measurement Reel with 25m measurement cable Drum with 50m measurement cable Earth drill, 35cm long Extension cable, 4m Cable set: measurement and high-resistance measurement cable for G range Magnetic test probes Plug insert for PRO-A3 adapter (Germany) Plug insert for PRO-A3 adapter (Switzerland)
n n GTZ3232000R0001
n n
n n
n n n GTZ3201000R0001
n n n n n n n n n n n n n n n n n n n n n
n GTZ3228000R0001 n GTZ3225000R0002 n n Z501A Z501O Z501S Z502T Z501P Z501R Z550A Z501J Z501L Z580A Z580B Z580C Z580D
Measuring adapter for systems, 3-phase current, phase sequence n Adapter for connecting clamp meters, 2-clamp method Plug inserts for PE and other similar measurements Test probe for remote triggering the Metriso G IR to USB interface Adapter cable, RS 232 to USB port Crank generator Alligator clips, 2 ea. Guard cable, 1 ea. with 1 alligator clip Extension cable, 5m
n n n n n n n n n
n n n n n n n n n n n
Current Clamps, Temperature Sensors Current clamp sensor: 1mA...15 A/1A...150A AC, WZ12C switchable Current sensor clamp, 0.1/1/10/100/1000A AC, Z3512A switchable Generator clamp: 0.2...1200A, 1mA/A, 40Hz5kHz, E-CLIP 2 52mm dia. T/H sensor Sensor for temperature and relative humidity Probes 1081 Probe Z502F Z721D Z751G Z591C NA101 NA102 Z502H Pouches, Cases F2000 HC30-C HC40 F837 Z502X Z550C Universal pouch Hard case for series C testers and accessories Hard case for 2 series C testers and accessories Ever-ready case for Metriso Ever-ready case for Protest Ever-ready case for Metriso G Triangular probe for oor measurements Barcode reader/scanner, infrared with RS 232 port Barcode printer RFID reader/scanner, (13.56 MHz) with RS 232 port Charger with 4 NiMH rechargeable batteries Charger for 0100S battery set Charger for battery sets for C series instruments Battery set: 8xNiMH rechargeable
n n n
n n n
n n n
n n n n
Geohm5
G1000+
G1000A
Type
METRAOHM 413
PROFITEST
METRISO Article
1000A
5000A
G1000
G500
5024
n n n n n n n n n n n
n n GTZ3196000R0001 Z502F Z721D Z751G Z591C Z501M Z501N Z502H Z700D Z541C Z541D Z502X Z550C
n n n n n n n n n n n n n
n GTZ3312000R0001 n
Ma
in de
Germ a
ny
GOSSEN METRAWATT
Table of Contents
71
50 to 0.01A DC/output voltage: 0 to 50V DC n Input power: 90to250V AC (max. 1.5kW) 50/60 Hz automatic nO perating temperature: -10 to 60 C; storage temperature -20 to 70 C
n WR50-12: n WR50-12R: n WR50-13: n WR50-13R:
Micro Junior 2
Article: M681A
10 A Micro-Ohmmeter, Portable and Fully Automated For testing and documenting connection and contact resistance
n Extremely accurate resistance measure-
ment in the eld nS uitable for eld use thanks to battery operation nF ully graphics compatible display; self-calibration nI nternal memory for measurement results nI ntegrated reports printer n Can be expanded for turns resistance measurement (50A, 50V) with WR50-1A
safety/protection circuit nS ingle pushbutton operation; emergency stop nR ugged, lightweight, water-proof carrying case Resistance measurement nT est current: 10 mAto10 ADC, resolution: 4 places, accuracy: 0.1%
n Battery: 14.8 V / 6 Ah, external charger: n Serial port: 9-pin RS 232 n Internal memory for 2000 measurement nO perating temperature: -10to60 C,
Micro Centurion 2
Article: M681E
200 A Micro-Ohmmeter for measurement of contact resistance at circuit breakers and connections nE xtremely accurate n Large input voltage range nI nternal memory: up to 2000 measureresistance measurement results Resistance measurement ment in the eld n Graphics compatible LCD with background nT est current: 10 to 200 A DC, resolution: 4 nS ingle pushbutton illumination places, accuracy: 0.1% operation / continuous n Interfaces: 9-pin RS 232 serial / 25-pin nI nput voltage range: 100 to 205V AC, 45 current Centronics parallel to 65Hz, max. 1kW n Graphics compatible display/self-calibration nO perating temperature: -10to60 C, nT emperature measurement (optional): n Internal memory for measurement results storage temperature -40to 70 C -20to140 C, resolution: 0.1 C, nS afety and protection circuitry; emergency off Scope of delivery: 5m measurement cable accuracy: 0.7% nR ugged, water-proof carrying case set, alligator clips
in de
Ma
Germ a
ny
GOSSEN METRAWATT
72
For sale in Germany only
Table of Contents
TR-1/TR-1P
Portable, Single-Phase Ratio Meter for Rough Use in the Field The TR-1 is a fully automated, single-phase transformer-turns ratio meter which is suitable for precise laboratory applications, as well as for use in the eld. Its a rugged, lightweight instrument which automatically measures turns ratio, excitation current and phase displacement. Furthermore, the TR-1 measures the highest ratios with the greatest accuracy in its class in the CT mode down to very low power ratings. Its is easy to operate, and can be used for all single and multiphase transformers. Specications nR ugged, lightweight, water-proof carrying case nO peration with rechargeable battery nR echargeable with mains power or 12V automotive adapter nG raphic LCD panel with background illumination nI nternal memory for the last 100 measurements nU p to 1000 measurements with fully charged battery nM emory for up to 16 transformers for comparisons nC ontinuity test/polarity test nF ully automated measurement nF unction for comparison with nominal values nT est current of up to 1 A for current transformer test (CT) nR echargeable lithium ion battery, 16.4V / 1.6Ah n2 -year standard guarantee
Measuring Parameters
u Range: 0.8to100, resolution: 5 digits u PT accuracy (40V): 0.08% rdg. 1 LSD u CT Accuracy (1 to 5V): 0.08% rdg. 1 LSD u Range: 101to4000, resolution: 5 digits u PT accuracy (40V): 0.08% rdg. 1 LSD nT est current, PT mode: 0to0.1 A, CT mode: 0to1 A, accuracy: 1mA, resolution: 0.1mA nO utput voltage, PT mode: 40V AC, CT mode: 1to5V, automotive mains input: 100 to 250V AC 50/60Hz automatic, 12V DC (optional) nI nterface: RS 232 nF ront panel: anodized aluminum nO perating temperature: -10 to 60C/ storage temperature: -40 to 70C
n TR-1 (M681R): 5m measurement cable set nT R-1P (M681K): 5m measurement cable
Scope of delivery:
T-Rex/T-Rex R
Article: M681D/Z681G
nS elf-calibration; 3-phase voltage vector measurement nO ne-time only hook-up to the transformer nL oad on device under test: < 0.05 VA nS afety and protection circuitry, Centronics (parallel) interface nR ugged, lightweight, water-proof carrying case n2 -year guarantee nL ine voltage: 100 to 240V AC 50/60Hz, auto-ranging nT est voltage: 40V AC/0.5A max. nO perating temperature: -10to60 C,
Voltage Vector Measuring Option for the TR-Spy Mark II, 3-Phase, Fully Automated The T-Rex allows the operator to test the phase relationships of transformer windings while applying three phase voltage. This system is thus capable of precisely measuring the angular relationships of 3-phase transformers. This option is intended for transformers with phase relationships of other than 30 degrees or multiples thereof.
Type TRO201
Description
Micro TR-Mark Micro Centurion WR WR 50-12 Article IIR Junior 2 50-1A WR 50-13 II
10m measurement cable extension (also in various other lengths) TP02 Temperature probe TP01 Temperature probe TRO203 Trigger switch, length: 10m MJO201 Kelvin clips, length: 3m RaytechFree PC software for all Raytech devices. Toolbox.net Always the most up-to-date version via free download. for checking ratio measurements and current TR-Checkbox Checkbox measurements
Ma
in de
n n
n n
n n n
n n
M681L
Germ a
ny
GOSSEN METRAWATT
Table of Contents
TEStERS
73 73
an equipment manufacturer per IEC/EN61010, 60601, 60950, 60335 n For service work or as the operating company u For electric equipment per IEC 62638 E, (DIN VDE 0701-0702) u For medical devices IEC 62353 (VDE 0751) u For welding equipment per IEC 60974-4 (VDE 0544-4)
GOSSEN METRAWATT
74
Table of Contents
SECULIFE SR
Article number Applications, Target Groups BGV A3, VDE 0701-0702, BetrSichV For trained persons Repairs and service Production Tooling expenditures Medical technology, VDE 0751, IEC 62353 Medical technology, IEC 60601 (SFC conditions) Welding technology, IEC 60974-4 (VDE 0544-4) Interfaces USB (m = master, s = slave) Ethernet CF connection RS 232C Test sequences Data storage (devices under test) Software (optional) Functions / Measurements Visual inspection
Protective conductor resistance
M700D M7010-V031/32 n n n n n n
M7010-V033 n n n n n n
Congurable n n n n n n n
M692A n n n s
meas. values
125 (PSI option: approx. 400; SECUSTORE: 1000) Comprehensive information is available on Page 89.
Insulation resistance
200 mA n
n 200mA/10A
n Programmable 200mA 10/25A 200mA Adjustable voltage d (RMS) E, (AC) d (AC, DC, RMS) E, (AC) d (AC, DC, RMS) E (AC) d (RMS) E, (AC)
200mA
Leakage Current Test Methods d = direct, E = equivalent, = differential Protective conductor (AC) (AC) (AC) E, (AC) E, (AC) current Touch current Patient leakage current Leakage current from the application part Device leakage current d (AC) d (AC) d (AC) d (AC)
d (AC, DC, RMS) E, (AC) d DC, RMS) d (AC, DC, RMS) d (AC, DC, RMS) E (AC, (AC) (AC, DC, RMS) d (AC, DC, RMS) d (AC, DC, RMS) d E (AC) d (AC) E (AC) E (AC) E (AC) d (AC, DC, RMS) d (AC, DC, RMS) d (AC, DC, RMS) E, (AC) E, (AC) E, (AC) E, (AC) U, I, P, PF n n n n n
Function Test U = line voltage, I = current consumption, P = power; PF = power factor U, I Other Measurements High-voltage test
RCD test (time)
n n
Expandable as desired n
Voltage measurement Temperature: Pt 100 / Pt 1000 (optional) Miscellaneous Display Operation Mains power
in de
LED
Black and white dot matrix Rotary switch, scroll keys 230V/50Hz 230V/50Hz 115V/60Hz
Color Black and white touch-screen dot matrix Touch-screen, Keys keys Battery 90Vto250V 90Vto250V 40Hzto400Hz 40Hzto400Hz
*> 3000 performance reduction
Ma
Germ a
ny
GOSSEN METRAWATT
Table of Contents
75
Test Instrument for BGV A3 and MPG Universal Test Instrument for Testing the Electrical Safety of Electrical Devices in Accordance with Safety Legislation, Medical Device Regulations and BGV A3 Automatic test sequences per:
n IEC 62638 E (VDE 0701-0702) u Testing of extension cables u Passive test sequence (device is not started up) u Active test sequence (device is started up) u Testing of computer equipment nI EC 62353 (VDE 0751),
suitable for persons with basic electro-technical instruction nM enu driven test sequences in compliance with the standards including automatic detection of protection classes I + II nV oltage measurement at SELV PELV circuits included in the test sequence nC onvenient memory and report generating functions (optional with S2N+) nE xpanded data storage and reports generating via optional, external memory nE xpandable with optional accessories for 3-phase devices Scope of delivery:
nP robe cable with test probe nA lligator clip nD AkkS calibration certicate nC arrying strap
Ma
in de
Germ a
ny
GOSSEN METRAWATT
76
Table of Contents
beginning on Page 82
same as M7010-V032, but instead of IEC 62353 (VDE 0751): testing of arc welding equipment
www.gossenmetrawatt.
com
SOFTWARE SECU-UP
Article: Z713C/Z713D
Firmware Update for all SECUTEST SIII..., SIII+... and -SII+... Not for SECUTEST SII, DC, med, SECUTEST 0701 or SECUTEST 0701/0702S. Software for reading out data from the SECUTEST and generating simple reports. The software includes:
nD evice software update resulting from
further development free of chargewithin a given primary version. Simply download and install the software, or send your instrument to GMC-I Service GmbH.
For a fee for instruments with older versions. Just ask our service department for an update appointment, and the instrument can be recalibrated at the same time if required. nL anguage selection for operating and help menus included languages: D, GB, F, I, E, NL, CZ nU pdating of optional device functions if enabled nE nabling of options after purchasing an enabling code
Ma
in de
Germ a
ny
GOSSEN METRAWATT
Table of Contents
SECUTEST|SIII+
cate
Designation
M7010 M693O
Standard Model M7010V013 M693A
n B00
Scope of delivery: nP robe cable with test probe/alligator clip nD AkkS calibration certicate Optional accessories: see SECUTEST S2N+/S2N+I10
n B00 Germany Germany, additionally with B01 service socket Connectors and UK B02 plugs for mains France / Czech Republic B03 power and socket for Denmark B05 device under test B06 B07 China / Australia B08 Other countries upon Switzerland B09 request Adapter set for international use (equipped with B11 feature B01) n C00 German English C01 French C02 Language Italian C03 for user prompting Spanish C04 Czech C05 Dutch C06 None F00 With HV test, setpoint: HV test max. 4kV AC test n F02 voltage output: max. 6.126kV DC G00 AC test current for 10A n G01 protective conductor 25A measurement Without AC test current G02 None KA00 Test sequence for IEC 60601 With (recommended with J01) KA01 KB00 Data memory for up None n KB01 to 125 tests With None KD00 Detection of probe at protective conductor With (including SK5 probe, 5m) n KD01 None KE00 Direct printing after each Direct printing n KE01 measurement for automatic test sequences
G01 G02
n n n
Ma
in de
Germ a
ny
GOSSEN METRAWATT
78
Table of Contents
DINVDE07010702 Optional accessories beginning on Page 82 n Package of 3 wands (Z753A): for data entry via the LCD touch-screen n Package of 2 retaining clips (Z753B) n DAkkS calibration certicate(Z752A)
printer or sensor
nU SB, CF connection for data exchange; Ethernet
connection for hook-up within the LAN Scope of delivery: n Mains connection at the test instrument: via 16A inlet plug country-specic at the mains end n Probe cable with test probe/alligator clip n Compact ash card type II
SECULIFE|SR
Article: M692A
nP rogrammable test sequences nC reates tree structure for devices under test
Universal, PC Controlled Measuring Instrument Used for testing the electrical safety of electrical medical devices after repair or modication, and for conducting periodic tests at regular intervals.
nS treamlined, time-saving tests thanks to direct measurement
(customer, building, room, oor, type etc.) nT ree structure interchangeable via e-mail
differential, equivalent)
nC onnection option for 10A test probe (PGS10 Z745Y)
EXcel)
nT est results displayed as a list by simply pressing a key
Ma
in de
Germ a
ny
GOSSEN METRAWATT
Table of Contents
79
METRATesterI5+
Article: M700D
n Panel mount variant:
Instrument for Testing the Electrical Safety of Electrical Equipment per DINVDE 0701-0702
nL arge, digital LCD panel nM ains connection testing with nger
Scope of delivery:
nF actory calibration certicate
Test
Measuring Range
DINVDE 0701-0702 nA ll measured values appear clearly at a large digital display nE xceeded limit values are indicated optically and acoustically nD imensions (W x H x D): 190 x 140 x 95mm, weight: approx. 1.3kg
Protective conductor resistance 0...19.99 Insulation resistance 0...19.99M Equivalent leakage current 0...19.99mA~ Absence of voltage 0...1.999mA~ Differential current 0.01...19.99mA~ Line voltage 207V...253V~ Load current 0...16.00A~
METRATESTERI5+3P
Article: M700K
Test Case with M700D for Testing Devices in Accordance with DIN VDE 0701-0702, can also be used as a Workshop Test Panel per DINVDE0104. For testing the electrical safety of single and 3-phase electrical equipment in accordance with the regulations: The test case complies with guidelines for equipment required for electrical installation operations issued by the Federal Committee for Electrical Installations, ZVEH, WFE and electrical power utilities.
nM ains connection: The
in phases L1, L2 and L3. Protective conductor measurement is performed correctly in accordance with DINVDE0104.
nC onvenient testing: All
Scope of delivery:
nT est case including test
instrument
nM ains cable with earthing
test case can be connected either to an earthing contact outlet with the two included power cables, or to a 16 A CEE mains outlet.
nT est types: DIN VDE tests
safety and function tests are executed in a practical fashion by switching mains voltage or the individual phases to the device under test with selector switches.
nR ugged case design:
contact plug and coupling socket nM ains cable with CEE 16 A, 5-pole mains plug and coupling socket nO ptional accessories beginning on Page 82
without mains operation: protective conductor resistance, insulation resistance, equivalent leakage current; DIN VDE tests with mains operation at all single and 3-phase devices: differential current, touch current. Function tests with measurement of current consumption and voltage
Test case consisting of an aluminum shell and a removable, lockable lid; ample space is provided for connection adapters and operating instructions.
nD imensions:
Ma
in de
Germ a
ny
GOSSEN METRAWATT
80
Table of Contents
MINITESTIBase MINITESTIPro
Article: see description MINITEST BASE (M712C) Test instrument for DIN VDE 0701-0702, for testing and measurement of repaired or modied devices by measuring: n Protective conductor resistance n Insulation resistance nP rotective conductor current differential current method nT ouch current direct measurement method nI ndication of limit value violations by means of color LEDs nT he probe cable is protected by means of a fuse link. MINITEST PRO (M712D) Test instrument for DIN VDE 0701-0702, for testing and measuring repaired or modied devices. Same as MINITEST BASE plus: nM easured values appear at a large digital display. nU SB interface for report generation with data nM INITEST software included on CD ROM nE xtensive safety features nR CCB in the plug on the mains cable
single and 3-phase MINITEST MASTER (M712U) Same as MINITEST PRO plus:
nM emory for 2000 tests with up to
MINITEST 3P MASTER
Scope of delivery: MINITEST BASE n Test instrument n Probe cable Additional features for MINITEST PRO/ MASTER: n USB connector cable n CD ROM with software Additional features for MINITEST 3P MASTER: n Adapter: CEE 32 to Schuko n Adapter: CEE 32 to 16 x 3 n Adapter: CEE 32 to 16 x 1 n Adapter: CEE 32 to 32 x 1 Optional accessories beginning on nP C.doc-WORD/EXCEL analysis software beginning on Page 91
MINITEST BASE
in de
MINITEST PRO
MINITEST MASTER
Ma
Germ a
ny
GOSSEN METRAWATT
Table of Contents
81
SECUTest|3PL
Article: M704B
n Function test with power analysis
Test Case for Tests per BGV A3/GUV A2 at Single and 3-Phase Devices and Extension Cables per DIN VDE 0701-0702 The test instrument is used for fast, safe periodic testing of electrical devices. Measurements per DIN VDE 0701-0702: nP rotective conductor resistance nP rotective conductor current nT ouch current Measuring methods:
nD irect measurement, equivalent leakage
for single phase DUTs: The following are measured or calculated: nL ine voltage /differential current nC urrent consumption /electrical energy nA ctive and apparent power/power factor nO n-time Report Generating Functions All of the values required for approval reports or device logbooks for electrical equipment (e.g. per ZVEH) can be measured. All measurement data can be documented and archived thanks to the measurement and test report which can be printed from, or stored to a PC.
Scope of delivery: nP robe cable with test probeand plug-on alligator clip nA dapter cable for connection to 16A, 3-phase systems/16A lighting networks (Schuko) nT est report ptional accessories: beginning on Page O 82 PC analysis software: PC.doc-WORD/ EXCEL beginning on Page 91
current, differential current Testing the electrical safety of extension cables nP rotective conductor resistance n Insulation resistance nC ontinuity, short-circuiting, polarity reversal
SECUTEST|21F
Article: M601A
SECUTEST|WP
Article: M704C Schematic diagrams which illustrate proper connection of devices under test to the SECUTEST WP can be displayed as well. Depending upon the device under test and usage, the following must be tested in accordance with these regulations: nP rotective conductor resistance n Insulation resistance
Workshop Test Panel for Testing Devices in Accordance with DIN VDE 0701-0702 The SECUTEST 21F test panel has been designed for the setup of test stations at shops specialized in electrical work. Its used for measurement and testing of electrical devices after repair or modication, as well as for periodic testing, in accordance with DIN VDE 0701-0702. The test panel is designed for wall mounting. Its equipped with a mains switch with undervoltage trigger and lock. Load currents of up to 25 A and line voltages of up to 500 V can be measured. Compliance with DIN VDE 0104 also assures awless protective conductor measurements.
n Dimensions: 532 x 792 x 179mm n Weight: approx. 24kg
In accordance with the guidelines for workshop equipment for electrical installation operations issued by the ZVEH / VDEW Optional accessories: nV L2E test adapter: testing of protective conductor and insulation resistance at devices and extension cables beginning on Page 84
The workshop test panel for periodic testing is intended for measuring and testing single and 3-phase electrical devices and extension cables. The test panel is mounted to the wall and connected to the mains by means of a permanently laid cable and pre-fusing with 3 x 32 A. Performance of measurements and tests is quick and easy. Integrated online instructions inform the user regarding all required connections, necessary work steps, operator errors, measurement results and more in all measuring modes. Information and test results appear at the dot matrix LCD in plain text. Online help can be queried and displayed at the LCD for all measuring and test functions, and for almost all settings.
Ma
in de
Germ a
ny
GOSSEN METRAWATT
82
TEStERS: Accessories
Table of Contents
SECUTEST|SI+/SECUTEST|PSI
Article: see table SECUTEST SI Memory or Input Module Test results from the test instruments are transmitted to the SI+ module directly via the interface. Test results are saved on-site as clear-cut, reliably documented measurement and test reports with date and time. Stored data can be transferred to a PC at a later point in time independent of the test instrument. SECUTEST PSI Printer-Memory and Input Module Test results are transmitted to the PSI module, which is integrated into the instruments lid, via a ribbon cable and are stored automatically. All measured values for 400 test reports can be stored to memory. Test results can be printed out on-site in the form of documented reports which can be furnished with date, time and text entered at the keypad.
nD imensions: 240x81x40mm,
SECUSTORE
Article: Z745U
SECUTEST PSI consumable materials: n PS-10P=pack of 10 six meter recording charts n Z3210=10 ribbon cartridges Scope of delivery: SECUTEST SI n SI+ module SECUTEST PSI n PSI module n 2 recording charts /1 ribbon cartridge n Interface description
1000 test reports. The ash memory module allows for battery-independent data storage.
nY -plug: simultaneous connection of a barcode/
Overview
Tester Accessories
METRATESTER 5+3P METRATESTER 5+ MINITEST SECUTEST
3P Master
S2N+10
S2N+W
S2N+
SIII+
SII+
General Accessories
SECUTEST SI+ SECUTEST PSI RS 232 USB converter SECULOAD CEE Adapter SECUSTORE
in de
n n n n n n
n n n n n n
n n n n n n
n n n n n n
n n n n n n
Ma
Germ a
ny
GOSSEN METRAWATT
3PL
n n
Table of Contents
83
AT3-III-E
Article: Z745S
nA utomatic adaptation to the program
Adapter for Active and Passive Testing of 3-Phase Current Consumers and Extension Cables in Combination with Safety Testers nT esting of single and 3-phase consumers, and extension cables in combination with external test instruments nA dditional protection during testing of defective devices with integrated residual current monitoring and shutdown nF unction test for automatic shutdown by pressing a self-test button nP revention of short-circuits and blown mains fuses during testing thanks to pre-testing stage
selected at the test instrument with transfer of measured values nI n combination with SECUTEST: testing of protective conductor resistance, insulation resistance, equivalent leakage current, dielectric strength, differential current, touch current nD imensions: 405x300x220mm (with lid), weight: approx. 6.7kg
AT3-IIS/AT3-IIS32
Article Equipment: 5-pole CEE 32 A (max. 20 A) and CEE 16 A Dimensions*: 290x120x105mm, weight: 2.4kg n AT3-IIS32 : Article: Z745X Equipment: 5-pole CEE 32 A (max. 40 A) and Test types: CEE 16 A, DIN VDE tests with mains operation single-phase earthing (active) nD ifferential current, touch current contact outlet DIN VDE tests without mains operation Dimensions*: (passive) 285x220x128mm, nP rotective conductor resistance, Weight: 4.15kg AT3-IIS insulation resistance, equivalent *Dimensions (LxWxH) without leakage current cables and grommets It allows for fully automated or manual testing in accordance with the menu-driven test sequences included with the test instruments, with transmission of test results to, and analysis at, SECUTEST test instruments.
nA T3-IIS: Article: Z745T
AT3-IIS32
Adapter for Active and Passive Testing of 3-Phase Current Consumers in Combination with SECUTEST Safety Testers The safety tester is used in combination with SECUTEST test instruments for testing 3-phase devices after repair, as well as for periodic testing (DIN VDE 0701-0702).
AT16-DI/AT32-DI
Article: Z750A/Z750B The following tests can be performed on devices with CEE plugs with the help of the adapter:
nT esting of protective conductor continuity n Insulation test n Equivalent leakage current measurement nD ifferential current measurement,
16 or 32A 3-Phase Current Adapter for Secustar FM, Seculife SB and Secutest S2N+W CEE adapter for quick, efficient testing of devices which are equipped with 5-pole 16A/6h or 32 A / 6h CEE plugs. The adapter is connected to a test instrument designed for testing portable devices in accordance with DIN VDE 0701-0702 or DIN VDE 0750/IEC 601, which is only equipped with an earthing contact outlet for connecting the device under test, and is capable of directly measuring protective conductor current.
L1-L2-L3-N
n Function test
Ma
in de
Germ a
ny
GOSSEN METRAWATT
84
Table of Contents
VL2E
Article: Z745W
Adapter for Passive Testing of Protective Conductor and Insulation Resistance at Devices and Extension Cables nE quivalent leakage current The test adapter is intended for the performance of measurements and tests at electrical devices and extension cables with Plus the following at extension cables: asy function test for single and 3-phase CEE plug connectors in combination with test n E extension cables including testing for instruments in accordance with the following conductor continuity, short-circuiting and standards: testing after repairs or periodic polarity reversal (clockwise rotation) with testing per DIN VDE 0701-0702. rotary selector switch using an insulation The following quantities can be tested with resistance measurement the adapter in combination with test nW hen performing tests, the adapters instruments which are intended for the connector cable is plugged into the test performance of the respective tests: socket at the test instrument. The test At electrical devices: instruments probe cable is additionally nP rotective conductor resistance plugged into the connector socket at the nI nsulation resistance (measurement of L1, adapter when testing extension cables. L2, L3 and N short-circuited to PE)
Article: Z745A
Adapter for 3-Phase Consumers nS afety outlets for 3-phase devices The Z745A CEE adapter allows for quick without permanently attached plug and efficient testing of devices equipped nP rotective conductor continuity test and with a CEE plug in accordance with DINVDE insulation test for each phase, and 0701-0702. combined phases, with rotary switch
nC EE attachment outlets:
SECULOAD
Article: Z745V Test Adapter for Testing Open-Circuit Voltage at Welding Units per EN 60974-4 In combination with a multimeter, the test adapter is used for testing welding units in accordance with the EN 60974-4:2007 standard. This standard stipulates that peak values for open-circuit voltage may not exceed the limit values, regardless of the utilized settings.
Germ a
ny
www.gossenmetrawatt.
com
Ma
in de
GOSSEN METRAWATT
Table of Contents
85
EL1
Article: Z723A Adapter for Testing Single-Phase Extension Cables
nC onnector cable to the test PRO-CH
instrument with handle / socket PRO-CH plug insert (GTZ3225000R0001): for plug inserts Plug insert for using the EL1 n Pro-Schuko plug insert adapter in Switzerland nP lug insert for non-heating devices
nE N60320 C14 to EN60320 C6
EL1
KS13
Article: GTY3624065P01
Cable Set for Connecting Test Instruments to the Mains Cable set for connecting test instruments to the mains without earthing contact sockets, and for connecting DUTs consisting of:
nC oupling socket with 3 permanently n3 measurement cables, 3 plug-on
pick-up clips
n2 plug-on test probes
connected cables
SK2/SK5
Probe Cable for Protective Conductor Measurement SK2 (Z745D): Probe cable with test probe and 2m probe cable (not coiled), suitable for high-voltage testing SK2W (Z745N): Probe cable with test probe and 2m probe cable (coiled), suitable for high-voltage testing SK5 (Z745O): 5 meter probe cable for protective conductor measurement SK5 (Z745K): 5 meter probe cable for protective conductor measurement (cable plus software)
nA utomatic recognition of changing
Ma
in de
Germ a
ny
GOSSEN METRAWATT
86
Table of Contents
Article: Z219C
WZ12C
Scope of delivery:
nC urrent clamp sensor including permanently attached safety cable with connector plug
Measuring Range
CAT at V Diameter
Conductor
Frequency Intrinsic Accuracy Range (% rdg. + mA) 45...65... 500Hz 3%+0.15mA/ 2% + 0.1A
PA4
Article: Z745L
Patient Connector Cable Adapter cable for SECUTEST, SECULIFE ST for adapting the 2 mm connector sockets at the SECUTEST / SECULIFE ST to 4 mm sockets and plugs, 1.5m long with 12 cables, each with 4mm plug
Article: GTZ3409000R0001
Standard PT 100 Temperature Sensor for Surface and Immersion Measurements Technical Data Sensor element Length of sensor element / sensor Temperature range, C Accuracy per DIN EN 60751/IEC 751 Intrinsic accuracy at 0 C/600C Transient recovery, T90 water/air Lead/insulation Pt100 130 / 1000mm -40 ... + 600 Class A 0.15K 5s/30s Strands: 2 ea. 0.35 sq. mm / PVC
Z701C
Ma
in de
Germ a
ny
GOSSEN METRAWATT
Table of Contents
87
Pouches, Cases
F2000 (Z700D): Universal Carrying Pouch nD imensions: 380 x 310 x 200mm F2020 (Z700F): Large Universal Carrying Pouch nD imensions: 430 x 310 x 300mm K2010 (Z504L): Aluminum Case nD imensions: 645 x 535 x 160mm Z740B (Z740B): Hard Case for Testers and Accessories nD imensions: 394 x 294 x 106mm BAGSTAR (Z700E): Ever-Ready Case
K2010
BAGSTAR F2000
General Accessories AT3-IIIE AT3-IIS AT3-IIS32 AT16-DI AT32-DI SECU-cal 10 Temperature / humidity sensor VL2E EL1 KS13 SECULOAD CEE adapter SK2 SK5 Current clamp sensors Brush probe PA4 Temperature sensor Carrying pouches F2000 F2020 K2010 Z740B BAGSTAR
n n n n n n n
n n n n n n n
n n n n n n n
n n n n n
n n n n n n
n n n n n
n n n n n n n n n n n n n n n n n n
n n n n n n n n n n n n n n n n n
n n n n n n n n n n n n n n n n
n n n n n n n n n n n n n n n n
n n n n n n n
n n n n n n n n n n n n n n
n n n n n n n n n n n n n n
com www.gossenmetrawatt.
Ma
in de
Germ a
ny
GOSSEN METRAWATT
SEcuLIFE SR
n n n n n n n n n n n n n n
SIII+ SECULIFE ST
SEcuLIFE ST
3P MaStER
S2N+10
S2N+W
S2N+
3PL
88
Table of Contents
SCANBASE/SCANWrite|RFID
Article: see table RFID reader/writer, for test instruments with USB or RS 232 port The RFID identication system is used to mark and identify tools and equipment. ID numbers can be written to RFID tags via a PC with the SCANWRITE. SCANWRITE, as well as other SCANBASE RFID reading devices, read out the code and forward it to our test instruments, in order to be able to allocate measured values and test results to the device under test in an unequivocal fashion. Type RFID reader/scanner, USB, 125kHz RFID reader/writer, USB, 13.56MHz RFID reader/writer, RS 232 Article Frequency Standard Z751D Z751E Z751G 125 kHz 13.56 MHz 13.56 MHz USB Connection
Z751D, E and G RFID readers are preprogrammed to read the Accessories: following RFID tags: Type Article Frequency Standard 13.56 MHz 13.56 MHz 13.56 MHz 125 kHz ISO 15693 ISO 15693 ISO 15693 Type 22mm wide self-adhesive 30mm with 3mm hole Pigeon ring, 10mm 20mm Qty. 500 500 250 100 RFID tag, ISO15693, Z751R 24x18mm RFID tag, ISO15693, Z751S 30mm/3mm RFID tag, ISO15693, Z751T pigeon ring RFID tag (125kHz), Z751U shape as requested
Overview
Tester Accessories
SECUTEST
Type
Barcode Printer
Article: Z721D
Label set nZ 722D: quantity x width: 3 ea. 24mm, 1 ea. 18mm, 1 ea. 9mm, 8m long n Z722E: quantity x width: 5 ea. 18mm, 8m long Scope of delivery: barcode printer /label set
in de
Ma
Germ a
ny
GOSSEN METRAWATT
BASE PRO MaStER 3P MaStER METRATESTER 5+ METRATESTER 5+3P SII+ SIII+ S2N+ S2N+10 S2N+W 3PL SEcuStaR FM PROFITEST MASTER
MINITEST
Table of Contents
SOFtWARETEStERS TEStERS
89
SOFTWAREElectrical Equipment
Data transfer, display, management and documentation our software does it all. Standards and regulations apply to all electrical systems and equipment. Time required for well-organized safety tests is minimized through the use of ultramodern test software. GOSSEN METRAWATT can provide you with a complete spectrum of software: beginning with a free report generating program right on up to comprehensive patManager for commercial, infrastructural and technical administration of properties, buildings, building technology and systems.
GOSSEN METRAWATT
90
SOFtWARE: Testers
Table of Contents
Overview
Instruments
SECUTEST Master Series SECUSTAR MINITEST METRISO G1000+ SECUSTAR FM+ METRA Machine 439/5.4 n n Machine 204/2.5 n n
SECUSTORE
3P MASTER
METRISO C
Type
SECULIFE ST
SECULIFE SB
n* n* n* n* n n*
ETC
Report Software for Following Testers: PROFITEST MASTER, MINITEST, SECULIFE SR, SECUTEST SI, METRISO G1000+ ETC offers a wide variety of support options for data acquisition and management, reports generating and the control of test sequences. PROFITEST MASTER
n The software acquires all important data for reports in accordance with DIN VDE 0100, part 600. n Test reports (ZVEH) can be generated automatically.
Distribution structures with electrical circuit and RCD data can be individually dened.
n Created structures can be saved to memory and loaded to the test instrument as required. n The test instrument and the PC can exchange data bidirectionally via USB. n Data can be exported to Excel, CSV and XML formats. n Multilingual user interface
PRO
204
n n n
GEOHM C
MASTER
S2N+10
PSI-BC
SI-BC
S2N+
SIII+
SII+
3PL
Free Download
SecuStore memory adapter for the SECUTEST range and the SECULIFE ST The software copies test reports from the memory adapter and saves them automatically as PDF les.
Germ a
ny
GOSSEN METRAWATT
Table of Contents
SOFtWARE: Testers
91
Report software as supplement to Microsoft Office Word and Excel. PC.doc-WORD/EXCEL inserts test results and data entered at the test instrument input module into report or list forms. These can then be supplemented and printed out with Word/Excel. System requirements: nW ord 97, 2000, 7.0 if reports are generated with Word nE xcel 2000 or higher if reports are generated with Excel nU ser interface: D, GB, F, FI, PL nP C with at least 500MHz and 256MB RAM n1 available serial or USB port and a USB RS232 adapter PC.doc-ACCESS: PC.doc-ACCESS is used for generating reports and managing test data as a supplement to Microsoft Access. System requirements:
nA ccess 2000, 7.0 nE xcel 2000 or higher
RAM
n1 available serial or USB port
Germ a
ny
GOSSEN METRAWATT
92
SOFtWARE: Testers
Table of Contents
pat Manager
DataBase and test report software for SECUTEST / SECULIFE ST and tHe (P)SI module
nE asy, clear-cut archiving/substantiation of tested devices
inspection cards, stickers nA utomatic scheduling and verication of the validity of tests n e-mail notication of past-due and upcoming tests nM odern, user-friendly interface
http://www.gossenmetrawatt.com/english/produkte/ patmanager.htm
Germ a
ny
GOSSEN METRAWATT
Table of Contents
SOFtWARE: Testers
93
Overview
PC.doc-Access Z714B D, GB Requires MS Access or Access Runtime Always complete n n With Access query functions n Using Access functions n n n n
Error statistics, defects statistics
Article User interface User Interface Autonomous Layout Firmware update (tester software) Generation of test reports Generation of lists List generator Forms generator Management of objects/tests Document management / image viewer Database management / navigator / search functions Database management / automatic deadline follow-up Common functions as icons
Data saved back to tester if set up accordingly
Free Download
Remote control Hazard analysis XML / Excel / ASCII import and export Catalog function Cost management Network compatible Barcode generation Client options / outdoor function Inventory management / error message module / maintenance / re safety Statistics
Special features
Tree structure
Germ a
ny
GOSSEN METRAWATT
94
NOtES
Table of Contents
Ma
in de
Germ a
ny
GOSSEN METRAWATT
Table of Contents
95
GOSSEN METRAWATT
96
Table of Contents
Sensational Response Times Highly Precise Setting and Measured Values High Output power
SYSKONP Series
SYSKONP series KONSTANTERs (SYSTEM KONSTANTER, programable) are single output, computer controlled laboratory power supplies for demanding professional use in R&D, production and test systems.
Extensive power-factor control (PFC), Safety Functions these models deliver RVP , OTP , OVP, OCP
1500, 3000 or 4500 W of power, depending upon Interfaces: device type, at up to 60 V AN IF, RS232, and max. 60, 120 or USB or GPIB 180A with characteristic UIP curve. Special Deactivatable switching controller n ctio Sink Fun technology and matching status controllers provide Free Operating Software for high dynamics and (from website) sensationally short response times of less e Programmabl than 2 ms. The setting Test Signal range for output voltage Generator
and output current can be restricted by specifying setting limits. The analog interface is equipped with two programmable trigger inputs and three signal outputs, which can be linked to various device functions for indication, or for controlling external devices and an auxiliary power output. Monitor outputs and control inputs for voltage and current setpoints are also available. Sensing leads allow for auto-sensing operation at the power consumer. Strict menu-driven operation simplies the use of highly diverse programming functions. The devices are transformed into freely programmable test-signal generators by means of an expanded sequence memory.
nA uto-ranging output with 1500, 3000 or
Scope of delivery:
nS YSKON KONSTANTER nM ains power cable
Optional accessories:
nI EEE 488 interface n3 -phase mains cable for
4500 W
nV ery short response times (rise and fall
times)
nE xcellent dynamic control parameters nO utput: voltage, current and power
(free download
nD rivers for LabVIEW, LabWindows/CVI,
regulated nM inimal residual ripple nM ains input with power-factor control nH ighly efficient, low power loss nO utput on/off function nS ink mode operation (can be deactivated) nL ockable controls nM aster-slave operation for parallel and series connection nO vervoltage, overcurrent and overtemperature protection
Agilent VEE
Starter Motor Curve Test Signal
SYSKON Test Sequence nS etup memory: 15 memory locations for complete congurations Sequence 1 Sequence 2 Sequence X
n Sequence memory:
Sequence S2
Sequence S3
Ma
in de
Germ a
ny
GOSSEN METRAWATT
97
com www.gossenmetrawatt.
SYSKONP1500
SYSKONP3000
SYSKONP4500
Type SYSKON P1500 (1500W) SYSKON P3000 (3000W) SYSKON P4500 (4500W) IEEE 488 interface 3-phase mains cable, 3m
Dimensions (W x H x D in mm) Benchtop Instrument 447 x 102 x 541 447 x 191 x 541 447 x 191 x 541 19" Rack 2 standard height units x 501 4 standard height units x 501 4 standard height units x 501
Ma
Germ a
ny
GOSSEN METRAWATT
98
Table of Contents
Article:see table
SSP32N KONSTANTER 120, 240 and 320 devices (single output system power supplies) are single output computer controlled laboratory power supplies for universal use in R&D, production and testing.
nM inimal residual ripple nO utput on/off function nM aster-slave operation for parallel and
Scope of delivery:
n SSP-KONSTANTER n Mains power cable with earthing contact
series connection
n Bridging of two instruments for the
plug
n Test report n Operating instructions
BET circuit technology (bidirectional energy transformation) allows for rise and decay times of less than 1 ms almost entirely independent of load (< 4 ms with 80V device). The analog interface includes monitor, auxiliary power and programmable signal outputs, as well as setpoint and programmable trigger inputs. This also makes it possible to adjust internal output impedance for the simulation of weak batteries. nA uto-ranging output with 120 W, 240 W or 320 W nI ncreased output power for brief intermittent periods nM inimal power loss n Constant voltage and constant current operating modes nS ink mode (static/dynamic) nS equence functions with sequence control for creating voltage and current sequences nE xtremely short response times thanks to BET technology
balancing
nC omprehensive test report nF loating output terminals at front and rear
Optional accessories: nI EEE 488 interface n IEEE 488 and RS 232 cable n Installation sets for rack mounting n Mains jumper cable Software: (beginning on Page 103) n Drivers for LabVIEW, LabWindows/CVI, Agilent VEE n GM SSP-SFP operating software
panels
nC an be electrically and mechanically
320W
Sequence X
Type
Power Pmax Pnom [W] [W] 120 120 120 240 240 240 320 200 240 240 320 360 360 430
Voltage Current Dimensions (WxHxD in mm) Weight Unom Inom Benchtop 19" Rack (approx. Article kg) [V] [A] Instrument 0 ... 20 0 ... 40 0 ... 80 0 ... 20 0 ... 40 0 ... 80 0 ... 32 0 ... 10 0 ... 6 0 ... 3 0 ... 20 0 ... 12 0 ... 6 0 ... 18 221.5x 102.0x 397.5 221.5x 102.0x 397.5 221.5x 102.0x 397.5 19"x2 standard height unitsx400 19"x2 standard height unitsx400 19"x2 standard height unitsx400 2.9 K320A K321A K322A K330A K331A K332A K334A K380A
120W
Outputs Working Range
Unom
Pmax Pnom
240W
2.9
320W
Inom
3.4 0.1
Ma
in de
Germ a
ny
GOSSEN METRAWATT
Table of Contents
99
Special circuitry allows for jumping from 0 V to nominal voltage (0V UNom) and from UNom 0V under nominal load conditions within very short response times of less than 10 ms. The analog interface includes monitor and auxiliary power outputs, as well as programmable trigger and setpoint inputs.
nA uto-ranging output with 500W, 1000W,
2000W or 3000W
nV ery short response times thanks to
for creating voltage and current sequences nM aster-slave operation for parallel and series connection nO vervoltage, overcurrent, polarity reversal and overtemperature protection nR ear panel connections: Output: bus bars with holes for M8 screws and 4 mm diameter Analog Interface Mains input, 62N: inlet plug with protective contact L + N + PE Mains input, 64N: screw-terminal block 3 L + N + PE
Scope of delivery:
nS SP-KONSTANTER nM ains power cable(SSP 62N) nI nstallation set for rack mounting nO perating instructions
nI EEE 488+RS 232 interface nR S 232 interface n3 -phase cable for SSP 64N models with
Optional accessories:
Agilent VEE
Sequence 2
Sequence X
Voltage Current USet [V] ISet [A] 0 ... 25 0 ... 12.5 0 ... 50 0 ... 25 0 ... 100 0 ... 50 0 ... 150 0 ... 75
Weight (approx. Article kg) 12 13 22 28 K344A K341A K345A K343A K352A K351A K362A K361A K382A K383A K991B
500 0 ... 52 500 0 ... 80 1000 0 ... 52 1000W 1000 0 ... 80 2000 0 ... 52 2000W 2000 0 ... 80 3000 0 ... 52 3000W 3000 0 ... 80 IEEE 488+RS 232 interface RS 232 interface 3-phase mains cable, 3 m 500W
*)
449 x 101 x 500 2 s. h. u. x 500 *) 2 s. h. u. x 500 449 x 101 x 500 449 x 190 x 500 4 s. h. u. x 500 449 x 190 x 500 4 s. h. u. x 500
Unom Pnom
Inom
Germ a
ny
GOSSEN METRAWATT
Ma
in de
100
230V AC/115V AC
nU p to 8 independent, electrically isolated
plug
n5 blanking plates for unused module slots nI nstallation set for rack mounting nO perating instructions
outputs nA ll outputs can be used as electronic loads as well nS hort response times and minimal residual ripple nO utput on/off function nO utputs can be activated and deactivated individually or in groups nM easuring function for voltage, current and power with threshold memory nH elp texts available in various languages by simply pressing a key nI EEE 488 and RS 232 interface Standard
Plug-in power supply modules and control module are not included with the basic instrument. Optional accessories (Page 105):
n IEEE 488 and RS 232 bus cable
Software (Page 103): nF ree driver software for LabVIEW, LabWindows/CVI, Agilent VEE (download from website)
Source I + Inom
Dimensions Weight (W x H x D in mm) Type (approx. Article Benchtop 19" Rack kg) Instrument 448 x 177 x 4 s. h. u. MSP 64 N 42 P basic device 6.6 K370A 390 x 440 MSP control module 0.7 K371A 2x24 2x0...8 2x0...3 3.3 K372A 2x24 2x0...16 2x0...1.5 3.3 K372B ES31 2x24 2x0...40 2x0...0.6 3.3 K372C 1x49 0 ... 7 0 ... 7 3.3 K372D 1x120 0 ... 30 0 ... 4 6.8 K373A ES32 6.8 K373B 1x120 0 ... 80 0 ... 1.5 Power Pnom [W] Voltage USet [V] Current ISet [A]
Ma
in de
Germ a
ny
GOSSEN METRAWATT
Table of Contents
101
LSP 32K
AnaloG ControlleD LaBoratorY PoWer SUpplIes: 120W to 320W SLP 32N-KONSTANTER 120 to 320
Article:see table
Series SLP 32N KONSTANTERs (single-output laboratory power supplies) are analog controlled, single output laboratory power supplies for universal use in R&D, production, training and service applications. SLP 32N KONSTANTERs are equipped with the same nominal output values and outstanding control characteristics as the SSP 32N series. However, in this case the output parameters are not set by means of processor controlled operating elements or via a PC interface, but rather in the traditional manner with ten-turn potentiometer. Measured values and setpoints for output voltage and current can viewed at two Type Power POut [W] 120W 240W 320W 120 120 120 240 240 240 320 Voltage USet [V] 0...20 0...40 0...80 0...20 0...40 0...80 0...32 Current ISet [A] 0...10 0...6 0...3 0...20 0...12 0...6 0...18 4-place digital displays. However, an analog interface for remote control and coupling purposes (also included with series SSP 32N instruments) is included here as well. Scope of delivery: n SLP-KONSTANTER n Mains power cable with earthing contact plug n Operating instructions Dimensions Weight (W x H x D in mm) (approx. Article Benchtop kg) 19" Rack Instrument K220A K221A K222A K230A K231A K232A K234A Optional accessories: (Page 105) nI EEE 488 interface n IEEE 488 and RS 232 cable n Installation sets for rack mounting n Mains jumper cable
Unom
Pmax Pnominal
2.7
3.2
Inom
in de
Ma
Germ a
ny
GOSSEN METRAWATT
102
Table of Contents
Scope of delivery: nL oad KONSTANTER n Mains power cable with earthing contact plug nO perating instructions Optional accessories: (Page 105) Interface adapter for USB / RS 232 Software (Page 103):
n Eload Management System
SCPI commands or LabVIEW driver Scope of delivery: nL oad KONSTANTER n Mains power cable with earthing contact plug nO perating instructions Optional accessories: IEEE 488 interface Software (Page 103):
n LabVIEW device driver
Power Type SSL 32EL 150 SSL 32EL 300 SPL 250-30 SPL 400-40 IEEE 488 interface
in de
Resistance RSet []
0.01...500.0 0.01...500.0 0.0200...2000 0.0200...2000
Dimensions (W x H x D in mm) Benchtop Instrument 215 x 100 x 280 226 x 110 x 414
1
PSet [W]
0.1...150.0 0.1...300.0
Weight (approx. Article kg) 5.0 5.8 0.1 K850A K851A K852A K853A K890A
Ma
Germ a
ny
GOSSEN METRAWATT
Table of Contents
103
Software
Free Download
SSP 32N
n n n n
SSP 62N/64N
n n n n
MSP 64D
n n n
LSP 32K
n
SSL 32EL
n
SPL
n n
Device driver for NI LabVIEW Device driver for NI LabWindows/CVI Device driver for NI Agilent VEE SYSKON Soft Front-Panel SSP Soft Front-Panel POWER Management System ELOAD Management System
Device Drivers for NI LabVIEW, NI LabWindows/CVI and Agilent VEE Device drivers for simple integration of our programmable laboratory power supplies and electronic loads into automated measuring and test systems which are controlled by the specified software packages are available for download from our website free of charge. SSP Soft Front-Panel PC User Interface for SSP-KONSTANTER All SSP KONSTANTER functions can be controlled and displayed at a PC with this Windows software. Additional devices can be individually operated by starting the SFP more than once.
n For the RS 232 and the IEEE 488(GPIB) interface n Runs under Windows 2000, XP, Vista and 7 n Automatic search for SSP devices at all available interfaces n Menu language: English Prerequisite: NI-VISA driver and additional NI-488.2 driver (National Instruments) must be installed for control via GPIB.
SYSKON Soft Front-Panel PC User Interface for SYSKON P Series This Windows software can be used to interactively control and display all SYSKON functions from a PC. Additional devices can be individually operated by starting the SFP more than once.
n For USB, RS 232 and IEEE 488 (GPIB) interface n Runs under Windows 2000, XP, Vista and 7 n Automatic search for SSP devices at all available interfaces n Menu language: English
Power Management System PC User Interface for LSP-KONSTANTER 32K Series 32K LSP Konstanter functions can be interactively controlled and displayed at a PC with this Windows software.
n For USB and RS 232 interface n Runs under Windows 2000, XP, Vista and 7 n Menu language: English Prerequisite: K910A or K910B interface adapter (see Page 105)
Eload Management System PC User Interface for SSL 32EL Electronic Load Series SSL 32EL electronic load functions can be interactively controlled and displayed at a PC with this Windows software.
n For USB and RS 232 interface n Runs under Windows 2000, XP, Vista and 7 n Menu language: English Prerequisite: K910A or K910B interface adapter (see Page 105)
Ma
GOSSEN METRAWATT
in de
Germ a
ny
104
Table of Contents
K320A 120 (200) K321A 120 (240) K322A 120 (240) K330A 240 (320) K331A 240 (360) K332A 240 (360) K334A 320 (430) K344A 500
0...20 0...40 0...80 0...20 0...40 0...80 0...32 0...52 0...80 0...52 0...80 0...52 0...80 0...52 0...80
0...10 0... 6 0... 3 0...20 0...12 0... 6 0...18 0... 25 0... 12.5 0... 50 0... 25 0...100 0... 50 0...150 0... 75
0.15 + 30 0.4 + 35 0.15 + 40 0.5 + 20 0.15 + 80 0.5 + 10 0.15 + 40 0.5 + 70 0.15 + 45 0.5 + 45 0.15 + 80 0.5 + 25 0.15 + 50 0.5 + 70 0.1 + 17 0.2+25 0.1 + 20 0.2+15 0.1 + 17 0.2+50 0.1 + 20 0.2+25 0.1 + 17 0.25 + 100 0.1 + 20 0.25 + 50 0.1 + 17 0.3 + 150 0.1 + 20 0.3+80
10 10 10 15 15 15 30 10 10 10 15 10 15 10 15
25 20 10 50 25 20 50 15 15 25 20 80 30 120 60
n n u Dyn. n n n n n n n u Dyn. n n n n n n n u Dyn. n n n n n n n u Dyn. n n n n n n n u Dyn. n n n n n n n u Dyn. n n n n n n n u Dyn. n n n n n n u u Dyn. n n n n n n u u Dyn. n n n n n n u u Dyn. n n n n n n u u Dyn. n n n n n n u u Dyn. n n n n n n u u Dyn. n n n n n n u u Dyn. n n n n n n u u Dyn. n n n n n
SSP 62 N 80 RU 12.5 P K341A 500 SSP 62 N 52 RU 50 P SSP 62 N 80 RU 25 P SSP 64 N 52 RU 100 P SSP 64 N 80 RU 50 P SSP 64 N 52 RU 150 P SSP 64 N 80 RU 75 P K345A 1000 K343A 1000 K352A 2000 K351A 2000 K362A 3000 K361A 3000
SYSKON P1500-60-60
K353A 1500
6 10 15
50 70 100
SYSKON P3000-60-120 K363A 3000 SYSKON P4500-60-180 K364A 4500 MSP Plug-In Modules ES 31 K 7 R 7 P ES 32 K 30 R 4 P ES 32 K 80 R 1.5 P ES 31 K 2x8 R 3 P ES 31 K 2x16 R 1.5 P ES 31 K 2x40 R 0.6 P K372D 49
0...7 0...4
0.05 + 4 0.05 + 16
1 3 3 1 1 3
3 3 2 3 2 2
n n n n n n
n n n n n n n n n n n n
K373A 120 K373B 120 K372A 2x24 K372B 2x24 K372C 2x24
Germ a
ny
GOSSEN METRAWATT
Sequence Control
Output On/Off
105
Residual Ripple
Auto-Ranging Output
U I [mVTRMS] [mATRMS] 10 10 10 15 15 15 30 25 20 10 50 25 20 50
Analog Controlled Laboratory Power Supplies n n Dyn. n n Dyn. n Dyn. n n Dyn. n n Dyn. n n Dyn. n n Dyn. n n n n n n n n n n n n n n n n n n n n n n n n n n n n Mains Input 50 ... 60Hz
Power
Type Article
Resistance
RS 232
Interfaces
PSet [W]
RSet []
IEEE 488
USB
[VAC]
Programmable Electronic Loads SSL 32 EL 150 R 30 SSL 32 EL 300 R 30 SPL 25030 SPL 40040 K850A K851A K852A K853A 0.1...150.0 0.1...300.0 0.001...250.00 0.001...400.00 0.001...360.0 0.001...360.0 0.001...80.000 0.001...80.000 0.001...30.00 0.001...30.00 0.0001...30.000 0.0001...40.000 0.01...500.0 0.01...500.0 0.0200...2000 0.0200...2000 u u n n u u u u 115/230 115/230 115/230 115/230
KONSTANTER Accessories
Mounting Kit, 2x32N Mains Jumper Cable RS 232 Interface Cable Interface Adapter
Designation Mounting kit 1x32N Mounting kit 2x32N Mains jumper cable, 0.4m 3-phase mains cable, 3m, with 5-pole 16 A CEE plug IEEE/IEEE bus cable, 2m
Usable for SSP 32N, SLP 32N SSP 32N, SLP 32N SSP 32N SSP 64N, SYSKON P3000/P4500 SSP 32N, SSP 62N/64N, MSP 64D, SYSKON SSP 32N, SSP 62N/64N, MSP 64D, SYSKON LSP 32K, SSL 32EL LSP 32K, SSL 32EL
Article K990A K990B K991A K991B K931A GTZ3241000 R0001 K910A K910B
in de
Z3241 RS 232 interface cable, 2m K910A Interface adapter, RS 232 / LSP, SSL K910B Interface adapter, USB / LSP, SSL
Ma
Germ a
ny
GOSSEN METRAWATT
Surge protection
Analog Interface
Output On/Off
Sink Mode
106
Table of Contents
com
commercial vehicles
nC ustomer-specic power supplies
Ma
in de
Germ a
ny
GOSSEN METRAWATT
Table of Contents
Photometry
107
PHOTOMETRY
Reliable measurement results with dened error limits are guaranteed by luminance meters and luxmeters classied in accordance with DIN 5032-7 and DIN EN 13032-1. This ensures that quality inspections, orientation measurements and assessments conducted with these meters deliver accurate statements. Calibration certicates and recalibration at regular intervals are required for use in qualityrelevant applications and for assessments. The GOSSEN Light Lab offers these services, even for products from other manufacturers, and issues factory calibration certicates. The optical table used for this purpose is subject to strict test equipment monitoring, and is traced back to the PTB in Brunswick, Germany (German Federal Institute of Physics and Metrology). Aside from the PTB, our lab is the rst in Germany to be accredited for illuminance by DAkkS (German accreditation authority), and is thus authorized to issue internationally recognized DAkkS calibration certicates. This assures that acquired measured values comply with official regulations, and as a rule stand up to legal argumentation.
GOSSEN METRAWATT
108
Table of Contents
Article: M503N/M502N
This high precision luxmeter is available in class B and class C versions in accordance with DIN 5032-7, appendix B of IEC 13032-1 and CIE 69. Both variants are equipped with V() adaptation as well as cosine correction, and reliably measure the illuminance of daylight and articial sources of light. Even in the case of very bright sunlight or illumination from headlights, no accessories are required. Due to its outstanding accuracy in accordance with class B, the MAVOLUX 5032 B USB is used primarily for certication and inspection applications. An additional measuring range with high initial sensitivity of 0.01lx makes it possible to measure extremely small illumination intensities. This even allows for reliable measurement of emergency lighting. After pressing the HOLD key, the measured value is saved to memory and display illumination included with this version is activated, making it possible to read the display in dark environments. Matching to the spectral brightness sensitivity of the human eye V() is highly precise with minimal deviation of just f1' < 3%. With accuracy according to class C, the MAVOLUX 5032 C USB is used primarily for general applications as an industrial measuring instrument. The smallest of four measuring ranges begins with an initial sensitivity of 0.1lx. V() matching deviation, which amounts to f1' < 7.5%, is considerably better than the permissible error limit for class C. Both variants can be used as unclassied luminance meters with the help of an optional luminance attachment with an acceptance angle of 15. Luminance is measured in candelas per square meter (cd/m) or foot-lamberts (fL), and denes the perceived brightness of a luminous or reecting surface. At GOSSEN, great emphasis is placed upon reliability by means of calibration. For purposes of substantiation, a factory calibration certicate or a DAkkS calibration certicate can be ordered along with either variant. Depending on how the meter is used, we recommend a calibration interval of 12 to 24 months.
Optional Accessoires:
nA rticle: M516G
M516G
Adapter disc for the prevention of light leakage from the side during contact measurement
M499G
Specications/Features:
nM aximum precision Classied measurement of illuminance in
www.gossen-photo.de
nS imple functions expansion Unclassied measurement of
More information:
lx or fc in accordance with class B or class C per DIN 5032-7, appendix B of IEC 13032-1 and CIE 69. nB road measuring range High initial sensitivity and a resolution of 0.01lx or 0.001fc for the MAVOLUX 5032 B USB, right on up to large illuminance values of 199,900lx or 19,990fc. nV () adaptation The spectral sensitivity of the silicon photodiode is color corrected and corresponds to the spectral brightness sensitivity of the human eye V(). The quality of this matching represents a signicant difference between the class B and class C variants. nC osine correction The luminosity of a at measuring surface is proportional to the cosine of the incident angle of light. This relationship is taken into consideration by the receiver during evaluation.
luminance in cd/m2 or fL is made possible by the optional luminance attachment. An additional adapter disc prevents erroneous measurements due to light leakage at the side. nC onvenient everyday use Simple operation, easy to read display, compact design, protection during transport in a high quality aluminum case. nN on-volatile memory 100 measured values can be saved, retrieved or transmitted to a PC via the integrated USB port. Mean illuminance values can also be calculated as a result. nC omputer-aided measurement The meters continuous operating mode is assured thanks to power supply via the USB port. Meter control, as well as acquisition, display and storage of measured values, is managed with included GLUX 2 software.
Please send RFQs, orders and requests for additional information to:
de
in G er m
an
GOSSEN METRAWATT
Table of Contents
109
MAVO-MONITOR USB
Article: M504G
This high precision luminance meter for contact measurement is assigned to class B in accordance with DIN 5032-7, appendix B of IEC 13032-1 and CIE 69, and measures the perceived brightness of luminous surfaces in candelas per square meter (cd/m) or foot-lamberts (fL). Excellent adaptation to the spectral brightness sensitivity of the human eye V() is highly precise with minimal deviation of just f1' < 3%, which is signicantly better than specied in the standard. After pressing the HOLD key, the measured value is saved to memory and display illumination is activated, making it possible to read the display in dark environments. The included adapter disc protects the meter from light leakage at the side during measurement, and the velvety coating prevents scratching of self-luminous and transilluminated surfaces. In industrial, commercial and service applications, luminance can be measured at monitors of any type, TV screens, light tables, trough luminaires, illuminated advertising surfaces, traffic signs and viewing screens. Calibration conducted at regular intervals is substantiated by means of a factory calibration certicate for special tests involving adherence to quality, safety and work safety regulations, monitor workstations in the eld of medical diagnostics and office technology. Depending on how the meter is used, we recommend a calibration interval of 12 to 24 months.
Specications/Features:
appendix B of IEC 13032-1 and CIE 69.
www.gossen-photo.de
More information:
nM aximum precision Classied measurement of luminance in cd/m or fL in accordance with class B per DIN 5032-7, nB road measuring range High initial sensitivity and a resolution of 0.01cd/m or 0.001fL, right on up to 19,990cd/m or 1999fL. nV () adaptation The spectral sensitivity of the silicon photodiode is color corrected and corresponds to the spectral brightness nC onvenient everyday use Simple operation, easy to read display, compact design, protection during transport in high quality nN on-volatile memory 100 measured values can be saved, retrieved or transmitted to a PC via the integrated USB port. nC omputer-aided measurement The meters continuous operating mode is assured thanks to power supply via the USB port.
Meter control, as well as acquisition, display and storage of measured values, is managed with included GLUX 2 software.
Ma
de
an
GOSSEN METRAWATT
Table of Contents
MAVO-SPOT 2 USB
Article: M508G
This high precision luminance meter for distance measurement with an acceptance angle of 1 is assigned to class B in accordance with DIN 5032-7, appendix B of IEC 13032-1 and CIE 69. It measures the perceived brightness of luminous surfaces in candelas per square meter (cd/m) or foot-lamberts (fL) in consideration of ambient light. Excellent adaptation to the spectral brightness sensitivity of the human eye V() is highly precise with minimal deviation of just f1' < 3%, which is signicantly better than specied in the standard. The test object can be homed in on precisely via the reex optics with a 15 eld of view and a sharply marked 1 measuring circle at the center. Focus can be set for distances ranging from 1 meter to innity. Shorter distances as of 34cm are made possible by means of optional close-up lenses. Alternatively, contact measurement can also be performed with an optional, top quality probe. The velvety coating on the adapter disc prevents scratching of self-luminous and transilluminated surfaces. Measurement functions are selected and measurements are started with convenient on-hand operation. The display on the viewnder is activated along with background illumination by simply pressing a key. The comparative and ratio measurements are especially advantageous, by means of which deviation of measured value B from reference value A is evaluated and displayed. The relationship A/B is used for contrast measurement at workstations. Percentage deviation %A allows for an assessment of the uniformity of monitor screens and projection screen illumination, and difference A-B is used to detect deviation during the production process. Calibration conducted at regular intervals is substantiated by means of a factory calibration certicate for special tests for adherence to quality, safety and work safety regulations, for monitor workstations in the eld of medical diagnostics and for office technology. Depending on how the meter is used, we recommend a calibration interval of 12 to 24 months.
Optional Accessoires:
n Article: M496G Close-up lens 1 (measuring distance: 51 to 100cm) n Article: M497G Close-up lens 2 (measuring distance: 34 to 50cm) n Article: M511G Probe for contact measurement M511G including adapter disc and lens cover n Article: M512G Reectance standard for lux measurement n Article: M513G Baffle n Article: M514G Carrying strap
M496G/M497G
M511G
M512G
M513G
M514G
Specications/Features:
www.gossen-photo.de
More information:
with an acceptance angle of 1 in cd/m or fL in accordance with class B per DIN 5032-7, appendix B of IEC 13032-1 and CIE 69. nP recision focusing The reex viewnder with a 1 measuring circle and a 15 eld of view is laid out for distance measurements from 1 meter to innity, with optional close-up lenses for focusing as of 34cm. nC ontact measurement Contact measurement can be performed with an optional probe and adapter disc. nB road measuring range High initial sensitivity and a resolution of 0.01 to 99,900cd/m or 0.01 to 30,000fL. nC omparative and ratio measurement Contrast A/B, uniform illumination %A and deviation A-B are calculated and directly displayed. nV () adaptation The spectral sensitivity of the silicon photodiode is color corrected and corresponds to the spectral brightness sensitivity of the human eye V().
de
in G er m
illuminance in lx or fc is possible with the optional reectance standard. nC onvenient everyday use Simple operation with one hand, easy to read viewnder display, compact design, " tripod thread, protection during transport in high quality aluminum case. nN on-volatile memory 1000 measured values or 10 groups of 100 measured values can be saved, retrieved or transmitted to a PC via the integrated USB port. nC omputer-aided measurement The meters continuous operating mode is assured thanks to power supply via the USB port. Meter control, as well as acquisition, display and storage of measured values, is managed with included GLUX 2 software. nE IZO RadiCS The meter is integrated into the software and can be used for comprehensive testing and automatic adjustment of RadiForce monitors, in order to assure constant and consistent image reproduction.
Ma
an
GOSSEN METRAWATT
Table of Contents
TYPE INDEX
111
1081 Probe ................................................... 59 A3-1663 3-Phase Adapters....................... 58 Accessories for PROFITESTI204+................... 61 Accessories for PROFITEST PV /PVsUN. ............ 63 Accessories: MAVOWATT ................................ 42 AC Current Clamp Sensors ............................. 58 AC Current Sensors ........................................ 29 AC Current Transformers ................................ 30 AC/DC Current Sensors ................................. 28 AT3-III-E ........................................................ 83 AT3-IIS/AT3-IIS32 ........................................ 83 AT16-DI/AT32-DI .......................................... 83 Barcode Printer, Reader, Scanner..................... 88 Barcode Scanner............................................ 50 BD232 /BD Pack 1 ........................................ 26 Brush Probe ................................................... 86 Cable Sets ..................................................... 32 CEE Adapter Z745A........................................ 84 Current Clamp Sensor .................................... 86 DranView 6 Software....................................... 44 DUSPOL....................................................... 66 E-ClipI1/E-ClipI2 ......................................... 57 EL1................................................................ 85 E-Set 3.......................................................... 57 E-Set 4.......................................................... 57 E-Set 5.......................................................... 57 ETC................................................................ 90 Flexible Current Sensors ................................. 28 Generator 5000A .......................................... 55 GEOHM 5 ...................................................... 56 GEOHM C....................................................... 56 Guard 5000A, Leadex 5000 ........................... 55 High Frequency Probe .................................... 32 Interface Cable RS 232 .................................. 33 IrDa-USB Converter ........................................ 59 ISO KALIBRATOR 1 ......................................... 54 Kelvin Clips .................................................... 33 Kelvin Probes.................................................. 33 KONSTANTER Accessories............................. 105 KS13............................................................. 85 KS24 Cable Set ............................................. 58 KY 5000A ..................................................... 55 Load KONSTANTERSPL .............................. 102 Load KONSTANTERSSL 32EL ..................... 102 LSP 32K-KONSTANTER ................................ 101 Magnetic Test Probes...................................... 58 MAVOLUX 5032B/C USB ............................. 108 MAVO-MONITOR USB ................................... 109 MAVO-SPOT 2 USB ...................................... 110 MAVOWATTI4 ............................................... 38 MAVOWATTI20.............................................. 38 MAVOWATTI30I40I70 .................................. 40 MAVOWATTI50 ............................................. 41 METRACALIMC ............................................. 18 METRACLIP SERIES......................................... 69 METRAFLEX P300.......................................... 50 METRAHITI1A / 2A......................................... 17 METRAHITI1ASi............................................. 19
METRAHITI2+ ............................................... 15 METRAHITI27EX ........................................... 21 METRAHITI27I / 27AS .................................. 20 METRAHITI27M............................................. 20 METRAHITI30M ............................................ 12 METRAHITIBAsE.............................................. 10 METRAHITICAL / CAL Pack ............................ 19 METRAHITIEBAsE. ........................................... 11 METRAHITIENERGY........................................... 13 METRAHITIEsPECIAL......................................... 11 METRAHITIETECH. ........................................... 11 METRAHITIEXTRA. ........................................... 11 METRAHITIH+E CAR...................................... 21 METRAHITIISo@AERO .................................. 14 METRAHITIISo............................................... 14 METRAHITIOUTDOOR. ....................................... 12 METRAHITIPRO............................................... 10 METRAHITIT-Com/T-COM plus ................... 14 METRAHITITECH.............................................. 10 METRAHITIULTRA........................................... 13 METRAHITIWORLD .......................................... 15 METRAHITIXTRA.............................................. 10 METRALINE SERIES ........................................ 64 MetraMachineI204/2.5+ (M504D), MetraMachineI439/5.4+ (M504F).............. 60 METRAmax 2 ................................................. 17 METRAmax 3 ................................................. 17 METRAmax6 ................................................. 17 METRAMAXI12)............................................. 15 METRAOHM 413 ............................................ 51 MetraPhaseI1 ........................................... 67 METRAportI3A .............................................. 16 METRAportI40S ............................................ 16 METRATESTERI5+3P..................................... 79 METRATesterI5+ ........................................ 79 METRATHERM|1 .......................................... 65 METRAVOLT 7A.............................................. 67 METRAVOLT 12D+L....................................... 67 METRAwin 10/METRAHit ............................... 35 METRAwin 90-2............................................. 34 METRAwin 90-F /-FJ...................................... 34 METRAWin/MAVOWATTI20 .......................... 44 METRISO 1000A........................................... 52 METRISO 5000A ......................................... 54 METRISO 5000D-PI...................................... 55 METRISO 5024............................................. 53 METRISO C..................................................... 51 METRISO G500MM/G500/G1000/G1000+.52 Micro Centurion 2........................................... 71 Micro Junior 2 ............................................... 71 MINITESTIBase / 3P Master MINITESTIPro /Master.................................... 80 MSP 64D-KONSTANTER ............................... 100 NA Hit 2x ....................................................... 27 NA X-TRA....................................................... 27 PA4 ............................................................... 86 pat Manager................................................... 92 PC.doc-ACCESS............................................. 91
PC.doc-EXCEL................................................ 91 PC.doc-WORD............................................... 91 PhaseCopI2 ................................................ 66 Plug Inserts: PRO- ..................................... 50 PMA16 .......................................................... 26 Pouches / Hard Cases / Covers / Hangers for Multimeters.................................. 36 Pouches, Cases for Testers............................. 87 PRO-A3 II Measuring Adapter.......................... 58 PRO-AB ......................................................... 50 ProfiSafe 400/690 ..................................... 67 PROFISCAN ETC............................................. 50 PROFITESTI2................................................. 49 PROFITEST I204+/204L+ ............................. 60 ProfiTestI204HP/2,5kV, ProfiTestI204HV/5,4kV.............................. 61 PROFITESTIC ................................................ 49 PROFITESTIMaster ....................................... 46 PROFITEST IPV .............................................. 62 PROFITEST IPVSUN .......................................... 63 PROFITESTIS1 .............................................. 48 Rechargeable Battery Set ............................... 58 RS 232 USB Converter ................................ 59 RS 232 USB Converter ................................ 82 SCANBase/SCANWriteIRFID..................... 50, 88 SECU-cal 10 .................................................. 84 SECULIFE|SR................................................. 78 SECULOAD .................................................... 84 SECUSTAR|FM+ / SECULIFE|SB..................... 78 SECUSTORE ................................................... 82 SECUTest|3PL.............................................. 81 SECUTEST|21F ............................................. 81 SECUTestIPSI .............................................. 61 SECUTestISI+ .............................................. 61 SECUTEST S2N+/+10/SECUTEST S2N+W..... 75 SECUTEST|SIII+ /SECULIFE|ST ..................... 77 SECUTEST|SI+/SECUTEST|PSI...................... 82 SECUTEST|WP............................................... 81 Shunts .......................................................... 26 SK2/SK5 ...................................................... 85 SLP 32N-KONSTANTER 120 to 320 .............. 101 SM16 ............................................................ 26 SECU-UP ....................................................... 76 SP350........................................................... 57 SSP 32N-KONSTANTER 120 to 320 ................ 98 SSP 62N/64N-KONSTANTER 500 to 3000...... 99 SYSKONP Series ........................................... 96 Telearm 1....................................................... 59 Temperature Probes ....................................... 30 Temperature Sensors ............................... 31, 86 T/F Sensor ................................................... 59 TR-1/TR-1P .................................................. 72 T-Rex/T-Rex R ............................................... 72 USB-HIT /Pack............................................... 26 USBIXTRA ...................................................... 26 VARIO Plug Adapter Set ................................. 59 VL2E ............................................................. 84 WR50-12/13/12R/13R ................................ 71 Z206D .......................................................... 26
GOSSEN METRAWATT
Table of Contents
Insulation measuring instruments RCCB testers Ohmmeters Loop resistance measuring instruments Phase sequence indicator DIN VDE 0413, part 2 DIN VDE 0413, part 3 DIN VDE 0413, part 4 DIN VDE 0413, part 6 DIN VDE 0413, part 7
PROFITEST 2 PROFITEST MTECH PROFITEST MTECH
Earth testers
Continuity testers
Ma
in de
Germ a
ny
GOSSEN METRAWATT
PRODUcT SPEcTRUM
113
MEAsURING INsTRUMENTs AND TEsTERs Measuring Systems for Medical Technology Function Testers Safety Testers Light Analyzers Modular Test System Measuring Technology Universal Mains Quality Energy Power Field Measuring Systems, Cable Detection Devices Resistance Thermometers / Clamp-Type Measuring Instruments Digital Multimeters Analog Multimeters Multimeter Accessories Calibrators Temperature Measuring Instruments, Light Meters Testing Technology Electrical Facility Management Solutions Installations and Equipment Testing (permanently installed) Electrical Device Testing (portable) Electrical Machinery Testing Earthing, Insulation, Low-Resistance Workshop Test Panels AS Interface Test Instruments Power Supply Technology Laboratory Power Supplies Electronic Loads Customer-Specic OEM Power Supplies Software for Measuring Instruments Testers Power Supplies
INDUsTRIAL MEAsURING AND CONTROL TEcHNOLOGY Measuring Technology Industrial Meas. Transducers for Temperature and DC Quantities Meas. Transducers for Heavy Current Quantities Measuring Transducers for Angle of Rotation and Position DC Signal Isolators, Isolating Transformers Power Packs, Mounting Racks Isolating Switch Ampliers, Isolating Ampliers Valve Control Modules, Limit Value Indicators Thermocouples, Resistance Thermometers Ex-i Equipment Energy Management Energy Meters, Summators, Additional Components Power Energy Mains Quality Load Optimization ECS Energy Control System Energy Management Engineering Competent Project Management Partner Control Technology Compact Controllers, Multi-Channel Control Systems CoDeSys and PC Worx Software Controllers Controller Modules for the Siemens S7-300 Recording Technology Display Recorders Continuous Line Recorders Point Recorders Software for Energy Control System Measuring Transducers Isolating Ampliers Controllers
de
in G er m
an
GOSSEN METRAWATT
Sdwestpark 15 90449 Nrnberg, Germany Phone: +49 911 8602-111 +49 911 8602-777 Fax: e-mail: info@gossenmetrawatt.com www.gossenmetrawatt.com
Electromediciones Kainos S.A. Poligon Industrial Est, Energa, 56 E-08940 Cornell de Llobregat, Barcelona Phone: +34 934 742 333 Fax: +34 934 743 470 E-mail: kainos@kainos.es www.kainos.es
Printed in Germany Subject to change without notice 1/11.12 Order no. 3-337-026-03
GMC-Instruments France SAS 3 rue Ren Cassin F-91349 Massy Cedex Phone: +33 1 6920 8949 Fax: +33 1 6920 5492 E-mail: info@gmc-intruments.fr www.gmc-instruments.fr GMC-mic technika s.r.o. Fgnerova 1a CZ-67801 Blansko Phone: +420 516 482 611/-617 Fax: +420 516 410 907 E-mail. gmc@gmc.cz www.gmc-cz GMC-Instruments Austria GmbH Richard-Strauss-Str. 10/2 A-1230 Wien Phone: +43 1 890 2287 Fax: +43 1 890 2287 99 E-mail: office@gmc-instruments.co.at www.gmc-instruments.co.at GMC-Instruments (Tianjin) Co., Ltd. Fon +86 10 84798255 Fax +86 10 84799133 Rm.710, Jin Ji Ye BLD. No.2, Sheng Gu Zhong Rd. P.C.: 100022, Chao Yang District info@gmci-china.cn, www.gmci-china.cn
GMC-Instruments Italia S.r.l. Via Romagna, 4 I-20046 Biassono (MI) Phone: +39 039 2480 51 Fax: +39 039 2480 588 E-mail: info@gmc-i.it www.gmc-instruments.it GMC-Instruments Nederland B.V. Daggeldersweg 18 NL-3449 JD Woerden Phone: +31 348 42 11 55 Fax: +31 348 42 25 28 E-mail: info@gmc-instruments.nl www.gmc-instruments.nl GMC-Instruments Schweiz AG Glattalstr. 63 CH-8052 Zrich Phone: +41 44 308 80 80 Fax: +41 44 308 80 88 E-mail: info@gmc-instruments.ch www.gmc-instruments.ch