Beruflich Dokumente
Kultur Dokumente
General
Cylinders Cylinder arrangement Bore Stroke Cylinder Displacement Total displacement Compression ratio Combustion system Aspiration
Specification data
Physical data
4 Vertical 94 112 0.78 3.11 in-line mm 3.7 mm 4.4 liter 47.4 liter 189.7 17.5:1 Direct injection Turbocharged in. in. in. 3 in. 3 Length Width Height Weight, dry Max bending @ housing: Max force @ flywheel: Axial: Radial: 710 495 703 255 900 mm mm mm kg Nm 28.0 19.5 27.7 561.0 663.3 in. in. in. lb. lb-ft
1500 N 3700 N
Spin-on cartridge 15.9 l/h 4.2 GPH 9.5 l/h 2.5 GPH
Fuel consumption
g/kWh lb/hphr 205.0 0.336 211.0 0.346 219.0 0.359 230.0 0.377
Exhaust system
Exhaust gas flow @ max rating Exhaust temp @ max rating Max allowable back pressure 940.0 m3/h 530 oC 75.0 mbar 553.2 CFM 986 oF 30 in. H 2O
Combustion air
m3/hr CFM 190.0 111.8 265.0 156.0 295.0 173.6 350.0 206.0
Cooling air
m3/h CFM 0.0 0.0 0.0 0.0
Noise, dB(A)
Avg. @ 1 meter
Lubrication system
Lubrication type Oil flow through filter at max rpm Oil pump relief valve setting Max oil temperature in oil sump Filter volume Oil change interval Forced feed 20.5 7 130 0.4 l/min 5.4 bar 102 o C 266 liter 0.423 500 hours GPM psi o F qt.
Certifications
U.S. EPA Non Road Tier 1 European COM 1 (37 - 75 KW) and COM 2 ( 18 - 37 KW)
Electrical
Starter motor Max battery CCA Voltage drop, battery (+), max 12V, 2.3 kW 950A 1.0V 24V, 4.0 kW 750A
All data refer to standard conditions of 25 oC, 1000 mbar Data are based on max intermittent output, unless noted
BF4L2011 ISO 3406 79 Hp at 2800 rpm 169.5 lb-ft at 1600 rpm EPA Tier 1 / COM 1/2 66 Intermittent 59 51
POWER (kW) TORQUE (Nm)
FUEL CONSUMPTION (g/kW-hr)
60 50 40 30 20 Continuous
44 37 29 22 14
230 Intermittent 223 217 210 Continuous 203 196 190 183
130 176 1000110012001300140015001600170018001900200021002200230024002500260027002800 0.390 238 0.380 0.370 0.360 0.350 0.340 0.330 0.320 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400 2500 2600 2700 2800 232 226 220 213 207 201 195
Tolerance: +/- 5% per ISO 3046 o Reference conditions: 25 C (77 oF) 99 kPa (29.31 in. Hg)
o o Fuel: 40 C (104 F) 0.850 kg/l (7.07 lb/gal)
Curves are based on current data and are subject to change without notice.