Beruflich Dokumente
Kultur Dokumente
Existing access contract details Market Participant (If not the applicant) Company name ABN or ACN Relationship to applicant Contact person
Telephone Fax Mobile Address
Existing access contract details Access offer special requirements Is this application related to a tender process? If so, please provide details.
Please provide details of any conditions precedent or variations you may seek from the standard Electricity Transfer Access Contract, if applicable.
Please provide details of any conditions precedent or variations you may seek from the standard Interconnection Works Contract, if applicable.
Please provide details of any exemptions you may seek from the Technical Rules, if applicable.
Technical Rules Section Description of Requested Exemption
Western Power
Western Power
Western Power
Power station
Address
Site-specific issues which may affect access to site or design, eg other construction onsite, mine site, environmental issues, soil conditions
Power station Declared Sent Out Capacity (DSOC) (MW) Total capability if different (MW) Forecast annual energy generation (GWH) Own black start capability? If so, provide details Power station Contract Maximum Demand (CMD) (eg black start load) Required connection date Required full operation date Expected life Attachments required A single line diagram showing the proposed arrangement of the power station, including types and connection arrangements of prime movers, generators, transformers, synchronising circuit breakers and any other relevant information. Identify each component so that the arrangement can be cross-referenced to the data provided in this form.
Western Power
Western Power
Minimum load (ML) MW (sent out) Generator inertia constant (Hg) (applicable to MW.s/rated MVA synchronous condenser mode of operation) Inertia constant (H) for all rotating masses MW.s/rated MVA connected to the generator shaft (for example, generator, turbine, etc). Include gearbox (if any) Total inertia for all rotating masses (MR2) Short circuit ratio Rated stator current Rated rotor current at rated MVA and power factor, rated terminal volts and rated speed Rotor voltage at which IROTOR is achieved Rotor voltage capable of being supplied for five seconds at rated speed during field forcing Neutral earthing impedance Resistances Stator resistance Rotor resistance at 20C Sequence impedances (saturated) Zero sequence impedance Negative sequence impedance Reactances (saturated) Direct axis transient reactance Direct axis sub-transient reactance Reactances (unsaturated) Direct axis synchronous reactance Direct axis transient reactance Direct axis sub-transient reactance Quadrature axis synch reactance Quadrature axis transient reactance Quadrature axis sub-transient reactance Stator leakage reactance Zero sequence reactance Negative sequence reactance Potier reactance Time constants (unsaturated) Direct axis open circuit transient Direct axis open circuit sub-transient Direct axis damper leakage Quadrature axis open circuit transient Armature time constant Quadrature axis open circuit sub-transient Reactive capability (at machine terminals) Largest lagging (overexcited) reactive power at PMAX kg.m2 Number A A V V (a+jb)% on MVA base % on MVA base ohms (a+jb)% on MVA base (a+jb)% on MVA base % on MVA base % on MVA base % on MVA base % on MVA base % on MVA base % on MVA base % on MVA base % on MVA base % on MVA base % on MVA base % on MVA base % on MVA base s s s s s s MVAr export
Largest leading (underexcited) reactive power at MVAr import PMAX Lagging reactive power at ML MVAr export Lagging reactive short time MVAr for time Capability at rated MW, terminal voltage and MVAr speed Leading reactive power at rated MW MVAr import Attachments required Capability chart (indicate effect of temperature and voltage) Open circuit characteristic chart Short circuit characteristic chart Zero power factor curve chart V curves MW, MVAr outputs vs temperature chart
Western Power
Western Power
Western Power
Western Power
Stage and Reheat Time Constants THP s TRH s TIP s TLP1 s TLP2 s Attachments Turbine frequency tolerance curve Block diagram in IEEE format of the dynamic model of the turbine/generator. Note: if Western Power does not already have a suitable computer model of the dynamic model, then the applicant must provide suitable code within 20 business days of being informed by Western Power. Dynamic model of turbine/generator shaft system in lumped element form showing component inertias, damping and shaft stiffness (may be required at a later date, depending on system study outcome).
Western Power
Western Power
Western Power
Western Power
Text / Diagram m/s Annual Average wind speed Text / Diagram Harmonics current spectra Attachments A typical 24 hour power curve measured at 15-minute intervals or better if available Startup profile MW, MVAr vs time for individual wind turbine Startup profile MW, MVAr vs time for wind farm total MW, MVAr vs time profiles for individual wind turbine under normal ramp up and ramp down conditions. High wind shutdown profile MW, MVAr vs time for individual wind turbine High wind shutdown profile MW, MVAr vs time for wind farm total Low wind shutdown profile MW, MVAr vs time for individual wind turbine Low wind shutdown profile MW, MVAr vs time for wind farm total Power curve MW vs windspeed Spatial arrangement of windfarm Block diagram in IEEE format of the dynamic model of the turbine/generator for each wind turbine. Note: if Western Power does not already have a suitable computer model of the dynamic model, then the applicant must provide suitable code within 20 business days of being informed by Western Power. Dynamic model of turbine/generator shaft system in lumped element form showing component inertias, damping and shaft stiffness (may be required at a later date, depending on system study outcome).
Western Power
Maximum droop % Normal droop % Minimum droop % Maximum frequency deadband Hz Normal frequency deadband Hz Minimum frequency deadband Hz MW deadband MW Frequence response capability Sustained response to frequency change MW/Hz Non-sustained response to frequency change MW/Hz Load rejection capability MW Attachments Block diagram in IEEE format of the dynamic model of the governor. Note: if Western Power does not already have a suitable computer model of the dynamic model, then the applicant must provide suitable code within 20 business days of being informed by Western Power.
Western Power
Dynamic characteristics of under excitation limiter Excitation limiter (drawn on capability generator diagram) Load drop compensation / VAr sharing controls V/f limiting controls Field Voltage rise time (synchronous generators) Voltage rise time (time from zero to maximum VAr s output while under voltage control) gain Sensitivity (output for a 0.5% voltage error) Attachments Generating unit and exciter saturation characteristics (at least 50 Block diagram in IEEE format of the dynamic model of the exciter/AVR. Note: if Western Power does not already have a suitable computer model of the dynamic model, then the applicant must provide suitable code within 20 business days of being informed by Western Power.
Western Power
Number of capacitor banks and MVAr size at rated Text voltage for each capacitor bank (if used) Control philosophy used for VAr/voltage control. Text Voltage rise time (time from zero to maximum output s while under voltage control) gain Sensitivity (output for a 0.5% voltage error) Attachments Block diagram in IEEE format of the dynamic model of the voltage controls. Note: if Western Power does not already have a suitable computer model of the dynamic model, then the applicant must provide suitable code within 20 business days of being informed by Western Power.