Beruflich Dokumente
Kultur Dokumente
Service Mode
NOTES W hen selecting [CE A uthentication] under [Enhanced Security] available from Service Mode, authentication by CE password is necessary. Enter the 8 digits CE password, and touch [END ]. (The initial setting for CE password is 9 2 7 2 9 2 7 2 . ) If a wrong CE password is entered, re-enter the right password. The machine will not enter Service Mode unless the CE password is entered correctly. To return to the Basic screen, turn OFF the Sub P ower Switch and turn it ON again. The service code entered is displayed as 8.
4037F3E502D A
NOTE Be sure to change the CE P assword from its default value. For the procedure to change the CE P assword, see the Enhanced Security. 29 6 B. Exiting T ouch th e [Ex it] k ey. C. Changing the Setting V alue in Service Mode Functions Use th e [+ ] / [-] k ey to enter or ch a nge th e setting va lue. Use th e 10-K ey Pa d to enter th e setting va lue. (T o ch a nge th e setting va lue, first p ress th e C lea r k ey b efore m a k ing a n entry.)
228
* 1: Settings are available only when the Optional FAX Kit (FK-502) is mounted.
Service Mode Machine Fusing Temperature Fusing Transport Speed Org. Siz e Detecting Sensor Adj. Printer Area Scan Area Print Positioning: L eading Edge Print Positioning: Side Edge Dup Print Positioning: Side Edge Image Position: L eading Edge Image Position: Side Edge Printer R esist L oop Cross Direction Adjustment Feed Direction Adjustment Color R egistration Adjustment Fusing L oop Siz e Manual B ypass Tray Adjustment
L ead Edge Erase Adjustment
233
Firmware Version
243
Imaging Process Adjustment G radation Adjust D Max Density B ackground Voltage Margin Transfer Output Fine Adjustment Stabiliz er Thick Paper Density Adjustment TCR Toner Supply Monochrome Density Adjustment Dev. B ias Choice CS R emote Care
244
250
229
Adjustment / Setting
bizhub C250
bizhub C250
265
267
Adjustment / Setting
Line Mag Setting Data Capture Counter Life Jam Service Call Counter W arning Maintenance Service Total Counter Of Each Mode Service Call H istory (Data) ADF Paper Pages Paper Jam H istory Fax Connection Error Counter Reset
274
230
278
291
Color Sample 8 Color Solid Pattern Running Mode Fax Test ADF Original Stop Position Registration Loop Adj. Auto Stop Position Adjustment Paper Passage Sensor Check Original Tray Width Sensor Auto Adjust FAX *1 Modem/ECU *1 NetWork *1 System *1
294
294
231
Adjustment / Setting
Solid Pattern
bizhub C250
277
FAX *1
bizhub C250
294
Finisher
295
Adjustment / Setting
4038F3E510DA
A. Date & Time Setting mode setting procedure 1. Call the Service Mode to the screen. 2. Press the following keys in this order. Stop 1 1 4 4 Clear 3. Enter year, month, day, hour, and minute, in that order, from 10-key Pad. (Year 4 digits Month 2 digits Day 2 digits Hour 2 digits Minute 2 digits) NOTE When setting the month, day, hour, or minute, enter 0 first if the data one digit.
4. Make sure that correct figures have been entered and then touch [Entry]. 5 . Touch [END] to return to the Service Mode.
232