100%(2)100% fanden dieses Dokument nützlich (2 Abstimmungen)
2K Ansichten4 Seiten
This is question paper of Architectural Drawing
Part-I Examinations Dec-2008 organised by Indian Institute Of Architects Navi Mumbai;leading to Bachlors Degree in architecture. Very useful for all students preparing for part -I Examination organised By Indian Institute Of Architects,navi Mumbai
Originaltitel
Architectural Drawing question Paper-2009June Indian Institute Of Architects;Navi Mumbai
This is question paper of Architectural Drawing
Part-I Examinations Dec-2008 organised by Indian Institute Of Architects Navi Mumbai;leading to Bachlors Degree in architecture. Very useful for all students preparing for part -I Examination organised By Indian Institute Of Architects,navi Mumbai
Copyright:
Attribution Non-Commercial (BY-NC)
Verfügbare Formate
Als PDF herunterladen oder online auf Scribd lesen
This is question paper of Architectural Drawing
Part-I Examinations Dec-2008 organised by Indian Institute Of Architects Navi Mumbai;leading to Bachlors Degree in architecture. Very useful for all students preparing for part -I Examination organised By Indian Institute Of Architects,navi Mumbai
Copyright:
Attribution Non-Commercial (BY-NC)
Verfügbare Formate
Als PDF herunterladen oder online auf Scribd lesen
CODE NO.104
SKETCH-3 NOS.
‘THE INDIAN INSTITUTE OF ARCHITECTS
PART-I EXAMINATION (SCHEME-2004) 5,
‘ARCHITECTURAL DRAWING
2008 (Tuesday)
‘Time: 4 Hours (10-3 2
NOTE: 1. Attempt TWO questions from Part-I and TWO questions from Part —II.
‘Attempt FOUR questions in all.
‘All questions carry equal marks.
‘Assume any data not given and state the same clearly.
ant answers to the questions should be written in English only
‘This paper contains FOUR pages in all including THREE: sketches.
aesen:
+ PART-AL
1 A square pis ofbase 45 mm side and height 90 mm is standing on the 2, it TS
_/, xis perpendicular to H. Face sides of the square prism are inclined at 45° to the
'V.P. as shown in the FIG: 1. There is square hole of side 25 mm-passing through the
oe ae ais ofthe square prism. The axis ofthe square hole is parallel to boob
rasa olan the HIP. Tnner face sides of the square hole are aso inclined at 45° '@
both the V.P. & the H.P. Draw the Front Elevation & Side Elevation of the object
_/ whose Plan is shown in the FIG: 1. Use full size scale.
J Draw a diagonal seale of 1: 5, showing centimeters, millimeters and long enovgh 19
pemaure up to 40 centimeters. Explain step wise construction of the scale and show
‘measurement of 31.2 cm on this scale.
3. A Square ABCD of 70 mm side has its comer A in the H. . its diagonal AC inclined
142° to the HLP. and the diagonal BD inclined at 45° to the V.P. and parallel to the
HP. Draw its projections.
PART-II
(1 Explain the following with sketches
a Cone of Vision
b Picture Plane
1.2. Draw 2 Two Point Perspective of the object whose Plan and Blevations are
shown in FIG: 2. Use an appropriate scale to accommodate the view on the
given drawing sheet/s. The Location of Picture Plane, Station Point and Eye
Level should be as shown in FIG: 2. Retain all the construction lines.
“3. Draw Shade and Shadows in the Perspective of the object shown in FIG: 2. Light
(7 rays are to taken parallel to the Picture Plane and inclined at 45° from left hand side
top.
3.) Draw Shade & Shadows in the Plan & Front Elevation of the object shown in FIG: 3.
| Light is to be taken at 45° from top left in the elevation and bottom left in the plan.
5)
2.5)
5)
(20)
25)
@s)ON" ARCHITECTURAL DRAWING
PART-1 EXAMINATIC
FIG: |
VP. ri
base 45 mm side
standing on the H.P.
square hole with
sides 25 mm in
the sqaure prism.
PLAN
(NOT DRAWN ON THE GIVEN SCALE)2.
FIG:
NVI NI
Aa SUIAUASHO dS
NOUVAaTA LNOWS
aM HL NENA\OHS,
SLNAWAMASVSW dO SLINT
FALON
NOILVASTS aais
1aAa‘1 NOZINOH /"13A37 FA
2 Od