Sie sind auf Seite 1von 18

1. IP address range. Send multicast data.

Different sub networks

Ans: D - Correct 2. IPv6

Ans: A and B Not Correct B and D should be correct 3. Difference b/w static and dynamic routing?

Ans: D Correct 4. IPv4 Header??

Ans: B and C - Correct 5. Guarantees reliable Delivery??

Correct

6. Traceroute work?

Correct answer B 7. Network 81.160.120.0/16 into 8 subnets 8190??

Correct 8. (S,G) pairs

Correct 9. MAC address. Discover a DHCP server

Correct 10. IPv6 modern telecom network

Correct

11. Maximum theoretical size of an IPv4 packet??

Correct 12. IGMPv1

Correct 13. dual stack

Correct 14. Corporate network. Single public IP address.

Correct 15. What is true about how MPLS implementations support different applications??

Correct

16. Label 524293?

Correct 17. True about LDP??

Correct Answers A and D 18. Which 2 label actions are performed by a P router??

Correct 19. true about IP/MPLS?

Correct answers B and C 20. purpose EXP Bits ?

Correct

21. enable LDP in MPLS backbone

Correct 22. 3 used to setup LSP

Correct 23. output shown in the Exhibit

Correct Answers B and D 24. true about label distribution in MPLS

Correct Answer B 25. LSR recognize the end of the label stack

Correct Answer - B 26. Layer 3 VPN . Handles customers overlapping IP add

Correct Answer B,C 27. protocol distributes the MPLS labels for L3VPN signaling

Correct Answer A 28. How do peer recognize each others ability to use MP-BGP extensions??

Correct Answer C 29. command to verify RDs configured for VPN contexts on SEOS.

Correct Answer A 30. Purpose of RT

Correct Answer B 32. PE to CE connection. Layer 3 VPN backbone

Correct Answers A and D 33. L3VPN MPLS labels exchanged.

Correct Answer B 34. correct RD and RT values

Correct Answer A 35. purpose of RD

Correct Answer - C 36. Decimal value DSCP = AF22

Correct 37. QoS mechanism . SmartEdge

Answer B 38. Which statement is true about queue tail drops

Correct 39. In which order do QoS building blocks typically

Correct 40. Which two Layer 3 Quality of Serviceclassify traffic

Correct Answer A and C

41. QoS marking of packets is a mechanism

Correct 42. In which two scenarios is a full-mesh iBGP neighborship

Correct Answer B,C 43. Which statement accurately defines an Autonomous System (AS)?

Correct 44. Between which IP addresses are BGP (iBGP) sessions.IETF

Correct Answer B

45.

Which statement accurately describes BGP

Correct Answer A 46. What network information is (without additional configuration)

Correct Answer A 47. Click the Exhibit button ---- peer 100.100.100.2

Correct 48. How is an eBGP neighborship configured on SEOS

Correct Answer D

49. Which type of attribute is the AS-PATH

Correct 50. What are two main functions for the AS_PATH attribute

Correct Answers B and D 51. Click the Exhibit button ----- Router_ID 192.168.254.3. DR state of the OSPF

Correct

52. A router learns about a remote network from

Correct

53. Which two statements are correct about areas in OSPF

Correct 54. What is a major problem of multiple exits in IS-IS level 1 areas

Correct Answer A.shud be b 55. All routers in a specific OSPF network are configured

Correct Answer D

56. What is the purpose of the overload bit in IS-IS

Answer: A

57. You must configure a new IP network inside your local organization

Correct 58. You have one IS-IS router in a Level 1/Level 2

Correct Answer B 59. Level 1 Router-A using NSAP address 49.0001.1921.6810.1001.00 and level 1

Correct

60. Which two statements are true about link state routing protocols

Correct 61. Click the Exhibit button ----- What will router A and Router-B do?

Correct 62. According to IEEE specifications, what is the maximum segment length for 100BASE-TX

Correct Answer B 63. Which two statements are true about Ethernet

Correct answer is A and C

64. What is the maximum size for an Ethernet frame with a VLAN header jumbo frames

Correct 65. Which protocol is used to avoid Layer 2 loops

Correct 66. What is the definition of a VLAN

Correct Answer D 67. Which IEEE standard defines the Ethernet II frame

Correct Answer C

68. The SmartEdge system is configured with context local

Correct Answers B, D and E 69. Which SEOS command will display the current configuration

Correct 70. Click the Exhibit ---- version SEOS-6.1.5.3

Correct Answer D 71. There is a text file named L3VPN.txt on the internal flash --- 300 L3VPN services

Correct Answer A

72. What protection does the SmartEdge have to handle ICMP spoofing or Denial-of-service attacks

Answer Correct

73. During initial startup of the SmartEdge system, which two steps are used management CLI.

Correct Answers A and C 74. [local]Ericsson# conf --- You have entered the configuration shown --- commands in the CLI

Correct Answers B and C 75. On the SmartEdge, which commands would you use to bind VLAN 100 on port 3/2 BRAS

Need to check

--- Boora: B (not confirm)

Das könnte Ihnen auch gefallen