Sie sind auf Seite 1von 14

3

you have access to the all menus: Info, If for some reason you don't want to
Access, Settings, Calculator, Clock, enter the 'Last Dialed calls menu' by
Keylock On?, Mail, Phone book. using
NOTE: If you try this on the GH688 the 'YES' key you can use the following
your phone may stop at Keylock On? key stroke instead: First '0' then '#'.
menu and
you´ll have to take your battery out to Battery level indicator when turned OFF
turn the phone on again. When the phone is turned off and the
phone is not changing - the battery level
Full Network Name can be seen for a short period of time by
You can see the Full Network Name by pressing the 'NO' key quick once (it
doing the following: has to be quick!) and then wait for about
Go to the network menu, when the 2 sec. The battery level will now be
phone displays the networks available shown in the display at its normal
(in position.
'Select net' and 'Edit list' menu) you can
press * and you will see the full name. Access menu without Sim card
To access to the menu in your phone
Full Operator List without having a card inside do the
You can view the full operator list by following: type **04*0000*0000*0000#
doing the following: When display say "Wrong Pin" press NO
Go to the 'Edit list' menu under and
'networks'. The phone say 'please wait' you have access to the all menus: Info,
(searching for other networks). When Access, Settings, Calculator, Clock,
finished, Press the < key once, then YES Keylock On?, Mail, Phone book.
twice. Now the phone displays the full
list. Browse through the list with the < Alarm Clock Menu
> keys. Go to MissedCall
Empty the list
How to enable net monitor on Ericson Press the -> key for a second or two
688 The option Menu size turns up
1. Remove SIM from phone Choose 'yes' and go from there.
2. Dial 112, press YES, hear something,
3. Dial 112YESNO Free phone calls using the GA628
4. Press < before SETTINGS
5. Then YES, <, then u will see NM on? NOTE: This trick has only been reported
6. press YES working on PREPAID GSM CARDS
and in some
Ericsson 628 Secrets countries and with some software
Check the IMEI (International Mobile versions.
Equipment Identity) The prepaid GSM SIM CARD is a kind
*#06# of "SIM card" which only has a certain
Reset the phones menu-language to amount
English. of credit on it.
*#0000# Here's the trick: Dial the number
To see the time and date normally and press YES. While
*#103# "connecting" is
Check the software release information shown on the screen, the following
>*<<*<* procedure should be carried out:
Shortcut for Last Dialed call menu

3
4
Press CLR then 0 then # and then NO the signal quality. If it becomes
(twice) so as to switch OFF the phone. negative for longer than 5 seconds, a
You new cell
can then still speak on the phone while it is selected.
is switched off but the SIM card does
not record your calls which will lead to NEC DB2000 Secrets
FREE phone calls in some countries.. I See IMEI code
hope!! *#06#
Reset to defaults
Motorola Flare Secrets *73738#
View IMEI Number Show Software version
*#06# *#2820#
RBS SP Lock info
Activate RBS The procedure will show if your phone
is locked.
(Note: pause means the * key held in *#3210# for SIM lock info,
until box appears) *#8140# for Net lock info.

To activate RBS type: [pause] [pause] SIM lock


[pause] 1 1 3 [pause] 1 [pause] [ok] *#4960 # - Inquiry * 4960 * password *
password # (send?) to Lock
You now have to press the [MENU] and #4960* password # to Unlock
scroll to the 'Eng Field Options' function [password] is an 8 digits number
with the keys, and enable it. Net Lock
*#7320# - Inquiry * 7320 * password *
De-activate RBS password # to Lock.
#7320* password # to Unlock.
To de-activate RBS type: [pause] [pause] [password] is an 8 digits number
[pause] 1 1 3 [pause] 0 [pause] [ok] Net Lock 2
*#2220# - Inquiry * 2220 * password *
This only works with some versions of password # to Lock
software. #2220* password # to Unlock
[password] is an 8 digits number
What's the use of RBS Subnet Lock
*#1110# - Inquiry * 1110 * password *
Get Distance From Base Station - Place password # to Lock
a call, when it is answered, press #1110* password # to Unlock
[MENU] [password] is an 8 digits number
until 'Eng Field Option' is displayed,
press [OK], select 'Active Cell', press Nokia 8110 Secrets
[OK], press [MENU] until 'Time Adv
xxx' appears, where xxx is a number. Check the IMEI
Multiply *#06#
this number by 550, and the result is the Check software version
distance from the RBS (Radio Base *#8110#
Station), in meters. Sim Clock Stop
*#746025625#
Get Signal Quality - press [MENU] until Warranty menu
'Eng Field Option' is displayed, press *#92702689#
[OK], select 'Active Cell', press [OK], Press the following warranty code
press [MENU] until 'C1' appears. This is
4
5
6232 (OK) Displays the Month and Year during a call, you will lose it when the
of Manufacture call ends. To prevent this happening
7332 (OK) Displays the date of the last just hold down Memory button -- the
repairment number will be saved (with no name) to
7832 (OK) Displays the date where the the
phone was purchased next available memory location.
9268 (OK) Displays Serial Number
37832 (OK) Set the Purchasing Date Deleting SMS messages quickly
MMYY When reading an SMS message, instead
87267 (OK) Transfers ALL phone of pressing Option, Erase to delete the
numbers, pictures, sounds from one message, simply press [C].
phone to
another Turning lights on temporarily
Hands Free If you have display lights turned off, you
To continue an existing call when can turn them on by quickly pressing
placing the 8110i into the hands free car and releasing the power button. They
kit will stay on as long as you are pressing
without it dropping the call, press the button.
Memory button just before connecting
the Silent mode temporarily
cable and placing it in the cradle. You can put your phone into silent
ringing mode temporarily by pressing
Display extra text in call costs feature Menu
If your network operator doesn't offer a then [#].
call costs service, you can still make
use of that function to display some Closing the cover without ending a call
personalised text on the screen of your If you press the menu key and then close
8110i. Go to Menu, [5], [7], [1], enter the sliding cover during a call you
PIN2-code and choose Set. Then type in will not end your call.
the limit of the currency units you're
using (if the call cost service worked, Nokia 6150 Secrets
you would have to type the cost limit of
the calls) and choose OK. In this case Check the IMEI
I typed 8110. Then go to the next *#06#
submenu (Menu, [5], [7], [2]), the Show Service menu
costs *#92702689#
in menu. Type in the PIN2 code again Show software version
and select Currency. Type in the unit *#0000# or *#6110#
price, in this case number 1. Then type Sim Clock Stop
the name of the currency - you can use *#746025625#
any string of letters and numbers 1-3 Warranty menu
characters long. then type 2 letter then *#92702689#
to confirm type two names beginning Press the following warranty code
with one of each of the letters. Then
press 6232 (OK) Displays the Month and Year
OK to confirm it. of Manufacture
7332 (OK) Displays the date of the last
Quick saving while in call repair
Saving numbers to memory during a call 7832 (OK) Displays the date where the
If you type a number into your phone phone was purchased
9268 (OK) Displays Serial Number
5
6
37832 (OK) Set the Purchasing Date 1. Go to calendar ( menu - 8 )
MMYY 2. Make note / reminder
87267 (OK) Transfers ALL phone 3. Enter some text into the edit box
numbers, pictures, sounds from one 4. Hold clear until whole text is cleared,
phone to then press back
another 5. Press 0. Main screen is shown but a
Power Button Tip space appears on the screen. You can't
If you press the button for a short see it of course.
moment, the menu with the profiles is 6. Enter 4 digits ( 1234 for example )
shown 7. Use the down arrow to move the
on the display. If you press one more cursor to the left side of the numbers and
time, the mobile turns itself off. You can the
use the up and down cursor keys to space (2 times down arrow)
scroll and enable a different alert setting. 8. Now enter 6 digits and press the green
"Call button".
The 54# Tip 9. Wait some seconds..the phone will
Type 1#, 2#........54# on the keypad now flash the background light and
(when you're not in the menu) to get the finally
phone number used for with this key reboot.
when speed dialing.
Philips Genie Secrets
Toggle Headset and Auto settings View the IMEI
#1: Try Connect the pin-out 1-2 (in front *#06#
from the right.) to toggle headset Status register
settings (The phone will think that you *#2254*#
ar using a headset - "headset" is Activate and deactivate the "DEBUG
displayed in the LCD) CALL"-Mode
#2:Try Connect the pin-out 2-3 (in front *#2255*#
from the right.) to toggle auto Time you are connected to the network
settings (The phone will think that you *#2558*#
ar using it in the car - "auto" is Phone reconnects to the network
displayed in the LCD) *#2562*#
Warm start
Call Menu *#2565*#
(In a call) you can press and hold down (NO) BLOCKING - list (15 items)
the menu button for 3 sec. and a menu *#3333*#
appears. (transfer, mute etc.) Init, Flags, SIM LOCK
*#3377*#
Quick SMS Typing Reset the (NO) BLOCKING - list
When typing SMS messages, you have *#3353*#
to wait some seconds before you can Name, Length, SIM phase
type the *#7378*#
next letter if it is in the same button than SECURITY CODE
the previous one. For example try *#7489*#
to write the word "letter", you have to Activate and deactivate the SLEEP
wait before you can enter the second MODE
"t". A much faster solution is to press the *#7693*#
# button twice and then the letter SPURIOUS INTERRUPT
"t". *#7787*#
Activate the beep signal when the phone
The Reboot Trick is reconnected to the network
6
7
*#2337*# Vocoder Reg - Normal, Earphone or
carkit can be selected
Samsung SGH600 Secrets *#9998*862#
Diag
Show IMEI *#9998*872#
*#06# Reset On Fatal Error
Show Software Version *#9998*947#
*#9999# Last/Chk
Show Software Version (instructions) *#9998*999#
*#0837# Yann debug screen
Show Serial Parameters *#9998*9266#
*#0001# Software version
Activates the smiley when charging *#9998*9999#
*#9125# Changes serial parameters (s=?, f=0,1,
Battery status (capacity, voltage, t=0,1)
temperature) *0001*s*f*t#
*#9998*228#
Program status Sony CMDZ1 Secrets
*#9998*246#
Change Alarm Buzzer Frequency View IMEI
*#9998*289# *#06#
Debug screens Show Software version and manufacture
*#9998*324# date
Watchdog # 8377466 #
*#9998*364# Alcatel One Touch Secrets
View IMEI Number
EEPROM Error Stack - Use side keys to *#06#
select values. Cancel and ok. Enter Service Menu
*#9998*377# *#000000#
Trace Watchdog
*#9998*427# View Secret Menu
Change LCD contrast 000000 then press *
*#9998*523#
Jig detect Sagem RC712 Secrets
*#9998*544#
Memory status Enter Engineering menu
*#9998*636# MENU - 5 - 1 - 1 - #
SIM File Size 1) IMEI
*#9998*746# 2) Flash Eprom etc.
SIM Service Table 3) ?
*#9998*778# 4) SP unblock
RTK (Run Time Kernel) errors 5) ?
*#9998*785# 6) Contrast Settings.
Run, Last UP, Last DOWN When in menu type * and a new menu
*#9998*786# with new options will appear.
Software Version
*#9998*837# Siemens S1 Secrets
Test Vibrator - Flash the screenligth
during 10 seconds and vibration Show IMEI
activated *#06#
*#9998*842# Tetris
7
8
Power on phone and enter PIN. before >come 2 our site:
phone has locked onto network, F9, send http://way.to/wyretap.org
own >
number, hit right button, hit 9. left is 2, >Bosch 718>
right is 8, rotate is 5, >Secret Engineering menu (menu 10)
and drop is 4. appear
>*#3262255*8378#>
Monitor Mode >Display the IMEI
Menu, 9 (Phone Options), 7 (Phone >*#06#>
Status), Left Display Button (left MENU >To set the language automatically
key), (Reset to English)
5553756, HangUp Button (Red HandSet >*#0000#>
key) >Set the Enhaced Full Rate
Now "Monitor" should appear at the >*#3370#>
bottom of the Network Options menu. >Reset the phone
Pressing the right Display Button when >#3370#>
in monitor mode will show a list of the >Enter sim lock code
six cells with the strongest signals. >*#9000#>
>Enter the network code
Trium MTD30 Secrets >*#9003#>
>Enter the subset code
Monitor mode >*#9004#
Hold C and press 379 >>Remove the sim lock permanently
Secret menu >*#9100#>
Hold C and press 987 >Remove the corporate lock
Version number permanently
Hold C and press 597 >*#9101#>
Phase1 and 2 >Remove the provider lock permanently
Hold C and press 499 >*#9102#>
Warm start >Remove the network lock permanently
Hold C and press 179 >*#9103#>
Instant turn off >Remove the subset lock permanently
Hold C and press 999 >*#9104# >
Unlock menu
Hold C and press 787090 >Bosch 738
[ Next Thread | Previous Thread | Next >
Message | Previous Message ] >Secret Engineering menu (menu 10)
appear
[ VoyUser Login ] Not required >*#3262255*8378#>
to post. >Display the IMEI
Post a public reply to this >*#06#>
message | Go post a new public message >To set the language automatically
* HTML allowed in marked (Reset to English)
fields. >*#0000#>
>Set the Enhaced Full Rate
Message subject (required): >*#3370#>
>Reset the phone
Name (required): >#3370#>
E-mail address (optional): >Enter sim lock code
>*#9000#>
* Type your message here: >Enter the network code
8
9
>*#9003#> >Secret Engineering menu (menu 10)
>Enter the subset code appear
>*#9004#> >*#3262255*8378#
>Remove the sim lock permanently >
>*#9100#> >Display the IMEI
>Remove the corporate lock >*#06#
permanently >
>*#9101#> >To set the language automatically
>Remove the provider lock permanently (Reset to English)
>*#9102#> >*#0000#>
>Remove the network lock permanently >Set the Enhaced Full Rate
>*#9103#> >*#3370#>
>Remove the subset lock permanently >Reset the phone
>*#9104# >#3370#
>> >>Enter sim lock code
>Bosch COM607 >*#9000#>
> >Enter the network code
>Secret Engineering menu (menu 10) >*#9003#
appear >>Enter the subset code
>*#3262255*8378#> >*#9004#>
>Display the IMEI >Remove the sim lock permanently
>*#06# >*#9100#>
>>To set the language automatically >Remove the corporate lock
(Reset to English) permanently
>*#0000#> >*#9101#>
>Set the Enhaced Full Rate >Remove the provider lock permanently
>*#3370#> >*#9102#>
>Reset the phone >Remove the network lock permanently
>#3370#> >*#9103#>Remove the subset lock
>Enter sim lock code permanently
>*#9000#> >*#9104# >
>Enter the network code >
>*#9003#> >Bosch 909/909s
>Enter the subset code >
>*#9004#> >Display the IMEI
>Remove the sim lock permanently >*#06#
>*#9100# >Set the language automatically
>>Remove the corporate lock >*#0000#>
permanently >Set the Enhanced Full Rate
>*#9101#> >*#3370#>
>Remove the provider lock permanently >Reset the phone
>*#9102# >#3370#
>>Remove the network lock >>Enter sim lock code
permanently >*#9000#>
>*#9103#> >Enter the network code
>Remove the subset lock permanently >*#9003# >
>*#9104# >Enter the subset code
>> >*#9004#>
> >Remove the sim lock permanently
>Bosch 908 >*#9100# >
>
9
10
>Remove the corporate lock >Mail, Phone book.
permanently >NOTE: If you try this on the GH688
>*#9101# > your phone may stop
>Remove the provider lock permanently >at Keylock On? menu and you´ll have
>*#9102# > to take your
>Remove the network lock permanently >battery out to turn the phone on again.
>*#9103# >
>>Remove the subset lock permanently >Full Network Name
>*#9104# >You can see the Full Network Name by
>> doing the
>Ericsson 688 Secrets >following:
> >Go to the network menu, when the
>Check the IMEI (International Mobile phone displays the
Equipment >networks available (in 'Select net' and
>Identity) 'Edit list'
>*#06#> >menu) you can press * and you will see
>Reset the phones menu-language to the full name.
English. >
>*#0000#> >Full Operator List
>Check the software release information >You can view the full operator list by
>>*<<*<*> doing the
>Shortcut for Last Dialed call menu >following:
>If you for some reason don't want to >Go to the 'Edit list' menu under
enter the 'Last 'networks'. The phone
>Dialed calls menu' by using the 'YES' >say 'please wait' (searching for other
key you can use networks). When
>the following key stroke instead: First >finished, Press the < key once, then
'0' then '#'. YES twice. Now
>Bat. level indicator when turned OFF... >the phone displays the full list. Browse
>When the gh688 is turned off and the through the
phone is not >list with the < > keys.
>changing - the bat. level can be seen for >
a short >How to enable net monitor on Ericson
>period of time by pressing the 'NO' key 688
quick once (it >1. Remove SIM from phone
>has to be quick!) and then wait for >2. Dial 112, press YES, hear
about 2 sec. The something,
>bat. level will now be shown in the >3. Dial 112YESNO
display at its >4. Press < before SETTINGS
>normal position. >5. Then YES, <, then u will see NM
> on?
>Access menu without Sim card >6. press YES
>To access to the menu in your phone
without having a >Ericsson 628 Secrets
>card inside do the following: type >
>**04*0000*0000*0000# When display >Check the IMEI (International Mobile
say "Wrong Pin" Equipment
>press NO and you have access to the all >Identity)
menus: Info, >*#06#>
>Access, Settings, Calculator, Clock, >Reset the phones menu-language to
Keylock On?, English.
10
11
>*#0000#> >PREPAID GSM CARDS and in
>To see the time and date some countries and with some
>*#103#> >software versions.
>Check the software release information >The prepaid GSM SIM CARD is a kind
>>*<<*<* of "SIM card" which
>>Shortcut for Last Dialed call menu >only has a certain amount of credit on
>If for some reason you don't want to it.
enter the 'Last >Here's the trick: Dial the number
>Dialed calls menu' by using the 'YES' normally and press
key you can use >YES. While "connecting" is shown on
>the following key stroke instead: First the screen, the
'0' then '#'. >following procedure should be carried
> out:
>Battery level indicator when turned >Press CLR then 0 then # and then NO
OFF (twice) so as to
>When the phone is turned off and the >switch OFF the phone. You can then
phone is not still speak on the
>changing - the battery level can be seen >phone while it is switched off but the
for a short SIM card does
>period of time by pressing the 'NO' key >not record your calls which will lead to
quick once (it FREE phone
>has to be quick!) and then wait for >calls in some countries.. I hope!!
about 2 sec. The >
>battery level will now be shown in the >>
display at its >Motorola Flare Secrets
>normal position. >
> >View IMEI Number
>Access menu without Sim card >*#06#
>To access to the menu in your phone >RBS
without having a >Activate RBS
>card inside do the following: type >
>**04*0000*0000*0000# When display >(Note: pause means the * key held in
say "Wrong Pin" until box appears)
>press NO and you have access to the all >
menus: Info, >To activate RBS type: [pause] [pause]
>Access, Settings, Calculator, Clock, [pause] 1 1 3
Keylock On?, >[pause] 1 [pause] [ok]
>Mail, Phone book. >
> >You now have to press the [MENU]
>Alarm Clock Menu and scroll to the
>Go to MissedCall >'Eng Field Options' function with the
>Empty the list keys, and enable
>Press the -> key for a second or two >it.
>The option Menu size turns up >
>Choose 'yes' and go from there.> >De-activate RBS
> >
>Free phone calls using the GA628 >To de-activate RBS type: [pause]
> [pause] [pause] 1 1 3
>NOTE: This trick has only been >[pause] 0 [pause] [ok]
reported working on >

11
12
>This only works with some versions of >
software. >Net Lock
> >*#7320# - Inquiry * 7320 * password *
>What's the use of RBS password # to
> >Lock.
>Get Distance From Base Station - Place >#7320* password # to Unlock.
a call, when it >[password] is an 8 digits number
>is answered, press [MENU] until 'Eng >
Field Option' is >Net Lock 2
>displayed, press [OK], select 'Active >*#2220# - Inquiry * 2220 * password *
Cell', press password # to
>[OK], press [MENU] until 'Time Adv >Lock
xxx' appears, where >#2220* password # to Unlock
>xxx is a number. Multiply this number >[password] is an 8 digits number
by 550, and the >
>result is the distance from the RBS >Subnet Lock
(Radio Base >*#1110# - Inquiry * 1110 * password *
>Station), in meters. password # to
> >Lock
>Get Signal Quality - press [MENU] >#1110* password # to Unlock
until 'Eng Field >[password] is an 8 digits number
>Option' is displayed, press [OK], select
'Active >Nokia 8110 Secrets
>Cell', press [OK], press [MENU] until >
'C1' appears. >Check the IMEI
>This is the signal quality. If it becomes >*#06#>
negative for >Check software version
>longer than 5 seconds, a new cell is >*#8110#>
selected. >Sim Clock Stop
>*#746025625#>
>NEC DB2000 Secrets >Warranty menu
> >*#92702689#
>See IMEI code >
>*#06# >Press the following warranty code
> >
>Reset to defaults >6232 (OK) Displays the Month and
>*73738# > Year of Manufacture
>Show Software version >
>*#2820# > >7332 (OK) Displays the date of the last
>SP Lock info repairment
>The procedure will show if your phone >
is locked. >7832 (OK) Displays the date where the
>*#3210# for SIM lock info, phone was
>*#8140# for Net lock info. >purchased
> >
>SIM lock >9268 (OK) Displays Serial Number
>*#4960 # - Inquiry * 4960 * password >
* password # >37832 (OK) Set the Purchasing Date
>(send?) to Lock MMYY
>#4960* password # to Unlock >
>[password] is an 8 digits number
12
13
>87267 (OK) Transfers ALL phone >when the call ends. To prevent this
numbers, pictures, happening just
>sounds from one phone to another >hold down Memory button -- the
> number will be saved
>Hands Free >(with no name) to the next available
>To continue an existing call when memory location.
placing the 8110i >
>into the hands free car kit without it >Deleting SMS messages quickly
dropping the >When reading an SMS message,
>call, press the Memory button just instead of pressing
before connecting >Option, Erase to delete the message,
>the cable and placing it in the cradle. simply press [C].
> >
>Display extra text in call costs feature >Turning lights on temporarily
>If your network operator doesn't offer a >If you have display lights turned off,
call costs you can turn
>service, you can still make use of that >them on by quickly pressing and
function to releasing the power
>display some personalised text on the >button. They will stay on as long as
screen of your you are pressing
>8110i. Go to Menu, [5], [7], [1], enter >button.
PIN2-code and >
>choose Set. Then type in the limit of >
the currency >Silent mode temporarily
>units you're using (if the call cost >You can put your phone into silent
service worked, ringing mode
>you would have to type the cost limit >temporarily by pressing Menu then [#].
of the calls) >
>and choose OK. In this case I typed >Closing the cover without ending a call
8110. Then go to >If you press the menu key and then
>the next submenu (Menu, [5], [7], [2]), close the sliding
the Show costs >cover during a call you will not end
>in menu. Type in the PIN2 code again your call.
and select >
>Currency. Type in the unit price, in this > Nokia 6150 Secrets
case number >
>1. Then type the name of the currency - >Check the IMEI
you can use >*#06#>
>any string of letters and numbers 1-3 >Service menu
characters long. >*#92702689# >
>then type 2 letter then to confirm type >Show software version
two names >*#0000# or *#6110#>
>beginning with one of each of the >Sim Clock Stop
letters. Then press >*#746025625#>
>OK to confirm it. >Warranty menu
> >*#92702689#>
>Quick saving while in call >Press the following warranty code
>Saving numbers to memory during a >
call If you type a >6232 (OK) Displays the Month and
>number into your phone during a call, Year of Manufacture
you will lose it >
13
14
>7332 (OK) Displays the date of the last >Call Menu
repair >(In a call) you can press and hold down
> the menu
>7832 (OK) Displays the date where the >button for 3 sec. and a menu appears.
phone was (transfer, mute
>purchased >etc.)
> >
>9268 (OK) Displays Serial Number >Quick SMS Typing
> >When typing SMS messages, you have
>37832 (OK) Set the Purchasing Date to wait some
MMYY >seconds before you can type the next
> letter if it is
>87267 (OK) Transfers ALL phone >in the same button than the previous
numbers, pictures, one. For example
>sounds from one phone to another >try to write the word "letter", you have
> to wait
> >before you can enter the second "t". A
>Power Button Tip much faster
>If you press the button for a short >solution is to press the # button twice
moment, the menu and then the
>with the profiles is shown on the >letter "t".
display. If you >
>press one more time, the mobile turns >The Reboot Trick
itself off. You >1. Go to calendar ( menu - 8 )
>can use the up and down cursor keys to >2. Make note / reminder
scroll and >3. Enter some text into the edit box
>enable a different alert setting. >4. Hold clear until whole text is
> cleared, then press
>The 54# Tip >back
>Type 1#, 2#........54# on the keypad >5. Press 0. Main screen is shown but a
(when you're not space appears
>in the menu) to get the phone number >on the screen. You can't see it of
used for with course.
>this key when speed dialing. >6. Enter 4 digits ( 1234 for example )
> >7. Use the down arrow to move the
>Toggle Headset and Auto settings cursor to the left
>#1: Try Connect the pin-out 1-2 (in >side of the numbers and the space (2
front from the times down arrow)
>right.) to toggle headset settings (The >8. Now enter 6 digits and press the
phone will green "Call
>think that you ar using a headset - >button".
"headset" is >9. Wait some seconds..the phone will
>displayed in the LCD) now flash the
>#2:Try Connect the pin-out 2-3 (in >background light and finally reboot. >
front from the >
>right.) to toggle auto settings (The >Philips Genie Secrets
phone will think >
>that you ar using it in the car - "auto" is >View the IMEI
displayed >*#06#>
>in the LCD) >Status register
> >*#2254*#
14
15
>Activate and deactivate the "DEBUG >
CALL"-Mode >EEPROM Error Stack - Use side keys
>*#2255*# to select values.
>Time you are connected to the network >Cancel and ok.
>*#2558*# >*#9998*377#
>Phone reconnects to the network >Trace Watchdog
>*#2562*# >*#9998*427#
>Warm start >Change LCD contrast
>*#2565*# >*#9998*523#
>(NO) BLOCKING - list (15 items) >Jig detect
>*#3333*# >*#9998*544#
>Init, Flags, SIM LOCK >Memory status
>*#3377*# >*#9998*636#
>Reset the (NO) BLOCKING - list >SIM File Size
>*#3353*# >*#9998*746#
>Name, Length, SIM phase >SIM Service Table
>*#7378*# >*#9998*778#
>SECURITY CODE >RTK (Run Time Kernel) errors
>*#7489*# >*#9998*785#
>Activate and deactivate the SLEEP >Run, Last UP, Last DOWN
MODE >*#9998*786#
>*#7693*# >Software Version
>SPURIOUS INTERRUPT >*#9998*837#
>*#7787*# >Test Vibrator - Flash the screenligth
>Activate the beep signal when the during 10
phone is reconnected >seconds and vibration activated
>to the network >*#9998*842#
>*#2337*# >Vocoder Reg - Normal, Earphone or
>Samsung SGH600 Secrets carkit can be
> >selected
>Show IMEI >*#9998*862#
>*#06# >Diag
>Show Software Version >*#9998*872#
>*#9999# >Reset On Fatal Error
>Show Software Version (instructions) >*#9998*947#
>*#0837# >Last/Chk
>Show Serial Parameters >*#9998*999#
>*#0001# >Yann debug screen
>Activates the smiley when charging >*#9998*9266#
>*#9125# >Software version
>Battery status (capacity, voltage, >*#9998*9999#
temperature) >
>*#9998*228# >Changes serial parameters (s=?, f=0,1,
>Program status t=0,1)
>*#9998*246# >*0001*s*f*t# >
>Change Alarm Buzzer Frequency >
>*#9998*289# >Sony CMDZ1 Secrets
>Debug screens >
>*#9998*324# >View IMEI
>Watchdog >*#06#
>*#9998*364#
15
16
>Show Software version and >six cells with the strongest signals.
manufacture date >
># 8377466 # >
>Alcatel One Touch Secrets >
>View IMEI Number >
>*#06# >Trium MTD30 Secrets >
>Enter Service Menu >Monitor mode
>*#000000# >Hold C and press 379>
>View Secret Menu >Secret menu
>000000 then press * >Hold C and press 987>
> >Version number
>Sagem RC712 Secrets >Hold C and press 597>
> >Phase1 and 2
>Enter Engineering menu >Hold C and press 499>
>MENU - 5 - 1 - 1 - # >Warm start
>1) IMEI >Hold C and press 179>
>2) Flash Eprom etc. >Instant turn off
>3) ? >Hold C and press 999>
>4) SP unblock >Unlock menu
>5) ? >Hold C and press 787090
>6) Contrast Settings.
>When in menu type * and a new menu Warning: Systems/people may
with new options save your message--keeping it for years.
>will appear.
> [ Contact Forum Admin ]
>
>Siemens S1 Secrets Forum timezone: GMT-8
> Before posting please read our privacy
>Show IMEI policy.
>*#06# VoyForums is a Free Service from
> Voyager Info-Systems.
>Tetris Copyright © 1998-2004 Voyager Info-
>Power on phone and enter PIN. before Systems. All Rights Reserved.
phone has locked
>onto network, F9, send own number,
hit right button,
>hit 9. left is 2, right is 8, rotate is 5,
>and drop is 4.
>
>Monitor Mode
>Menu, 9 (Phone Options), 7 (Phone
Status), Left
>Display Button (left MENU key),
5553756, HangUp Button
>(Red HandSet key)
>Now "Monitor" should appear at the
bottom of the
>Network Options menu.
>Pressing the right Display Button when
in monitor mode
>will show a list of the
16

Das könnte Ihnen auch gefallen