Beruflich Dokumente
Kultur Dokumente
1. Version
Shows a menu where you can access the version numbers for the PDA and the
Software (redirects to the Settings Version applet)
################################################## ########
Note: Changing this will hard-reset the device. This won't lock or unlock the device with
the specified operator.
################################################## ########
3. Network-Call Setting:
1. Power On Attach: (Attach [default] or Detach)
2. Service Domain: (Combined [default], CS or PS) Changes which service domain to
use.
3. Network mode: (Auto [default], GSM or WCDMA) Changes the data connexion mode.
WCDMA is 3G.
4. Network order (Auto [default], GSM first, WCDMA first or No change) Changes which
mode to try first when connecting, with Network Mode on Auto.
5. Internal - Password is *#0807#. Here you can:
i.e. change Bloototh MAC address (or BT Mac Adress - I don't remember correct name)
i.e. change Network MAC address
*#0002*28346#
volumes.
Opens the Audio control utility, where you can adjust low-level
*#232337#
(Executes \Windows\bthrftest.exe) Shows the Bluetooth RF tester and the
device address.
*#32489#
(GSM test) Shows the ciphering status and options to enable or disable it.
*#2263#
(Executes \Windows\bandsel.exe -band) (GSM test) Shows the GSM
band selection screen, with the options Automatic [default], GSM 850, 900, 1800, 1900,
850/190 and 900/1800.
*#1234#
(Executes \Windows\KSReset.exe #Version) Shows the PDA and the
Phone version number.
*#0782#
settings.
*#0673#
*#9090#
*#0842#
Shows tests for the Vibration, the Back Light and the Alert LED (Power
buttton LED).
*#2580#
*#0228#
(GSM test) Shows the detailed GSM status: Antenna signal power,
served network mode, temperature, Battery, Voltage (Antenna ADC test)
*#2222#
(Executes \Windows\Line_KeyTest.exe)
THIS CODES WILL UNLOCK NEARLY ALL OF THE NEW MODEL SAMSUNG
PHONES (?) EXCEPT SMART PHONES
*7465625*638*00000000*00000000#
NEXT ENTER
#7465625*638*00000000#
sp lock - inactive
cp lock - inactive
sim lock - inactive
activa lock - inactive
phone lock - inactive
auto network - inactive
auto subset lock - inactive
auto sp lock - inactive
auto cp lock - inactive
auto sim lock - inactive
Samsung t619
*7465625*638*00000000*00000000#
NEXT ENTER
#7465625*638*00000000#
Samsung t809
00000000)
4. #7465625*638*00000000# (this deactivates network lock w/00000000)
5. *#7465625# to check all locks
Put a non-accepted SIM Card and turn it on. Type *#9998*3323#. Press Exit. You will get
a new menu. Select Malloc Fail.