Beruflich Dokumente
Kultur Dokumente
Item No
Short Description
Unit
Material
Labour
Total
1-1-2 1-1-3
1-1-4 1-1-5
1-1-6 1-1-7
1-1-8
1-1-9
Note :-
Chiselling wall/floor appropriately and with supplying & laying ISI mark Rigid Steel conduit 16 SWG 20 mm dia. with necessary accessories as per specification No: WG-MA/CC, para no. 1.2.3 Supplying & laying ISI mark Rigid Steel conduit 16 SWG - 20 mm. dia. with necessary accessories as per specification No: WG-MA/CC, para no. 1.2.3 Chiselling wall/floor appropriately and with supplying & laying ISI mark Rigid Steel conduit 16 SWG 25 mm dia. with necessary accessories as per specification No: WG-MA/CC, para no. 1.2.3 Supplying & laying ISI mark Rigid Steel conduit 16 SWG - 25 mm. dia. with necessary accessories as per specification No: WG-MA/CC, para no. 1.2.3 Chiselling wall/floor appropriately and with supplying & laying ISI mark Rigid Steel conduit 16 SWG 32 mm dia. with necessary accessories as per specification No: WG-MA/CC, para no. 1.2.3 Supplying & laying ISI mark Rigid Steel conduit 16 SWG - 32 mm. dia. with necessary accessories as per specification No: WG-MA/CC, para no. 1.2.3 Chiselling wall/floor appropriately and with supplying & laying I.S.I. Mark Rigid P.V.C. conduit 20 mm. dia. with necessary accessories as per specification No: WGMA/CC, para no. 1.2.1 Chiselling wall/floor appropriately and with supplying & laying I.S.I. Mark Rigid P.V.C. conduit 25 mm. dia. with necessary accessories as per specification No: WGMA/CC, para no. 1.2.1 Chiselling wall/floor appropriately and with supplying & laying I.S.I. mark Rigid P.V.C. conduit 32 mm. dia. with necessary accessories as per specification No: WGMA/CC, para no. 1.2.1 1) For concealed wiring stranded copper wires shall be invariably used. 2) Add Rs 3/- per meter for erecting conduit on stone wall
Mtr.
105
35.89
141.00
Mtr. Mtr.
105 124
29.56 35.89
135.00 160.00
Mtr. Mtr.
124 169
31.67 44.34
156.00 213.00
Mtr. Mtr.
169 69
33.78 35.89
203.00 105.00
Mtr.
80
40.12
120.00
Mtr.
98
44.34
142.00
1-2-2
1-2-3
1-2-4
1-2-5
1-2-6
Supplying and laying P.V.C. corrugated flexible conduit 16 mm in dia. conforming to I.S. and approved make with required number of couplings, PVC bushes, check nuts etc. complete. Supplying and laying P.V.C. corrugated flexible conduit 20 mm in dia. conforming to I.S. and approved make with required number of couplings, PVC bushes, check nuts etc. complete. Supplying and laying P.V.C. corrugated flexible conduit 25 mm in dia. conforming to I.S. and approved make with required number of couplings, PVC bushes, check nuts etc. complete. Supplying and laying P.V.C. corrugated flexible conduit 32 mm in dia. conforming to I.S. and approved make with required number of couplings, PVC bushes, check nuts etc. complete. Supplying and laying P.V.C. corrugated flexible conduit 40 mm in dia. conforming to I.S. and approved make with required number of couplings, PVC bushes, check nuts etc. complete. Supplying and laying P.V.C. corrugated flexible conduit 50 mm in dia. conforming to I.S. and approved make with required number of couplings, PVC bushes, check nuts etc. complete. Supplying and laying rigid PVC conduit 20 mm dia. with PVC accessories on wall/ceiling as per specification No: WG-MA/CON, para no. 1.1.1 Supplying and laying rigid PVC conduit 25 mm dia. with PVC accessories on wall/ceiling as per specification No: WG-MA/CON, para no. 1.1.1 Supplying and laying rigid PVC conduit 32 mm dia. with PVC accessories on wall/ceiling as per specification No: WG-MA/CON, para no. 1.1.1 Supplying and laying PVC trunking (PVC casing-n-capping) of size 20 mm. with accessories on wall/ceiling as per specification No: WG-MA/CON, para no. 1.1.2 Supplying and laying PVC trunking (PVC casing-n-capping) of size 25 mm. with accessories on wall/ceiling as per specification No: WG- MA/CON, para no. 1.1.2 Supplying and laying PVC trunking (PVC casing-n-capping) of size 32 mm. with accessories on wall/ceiling as per specification No: WG-MA/CON, para no. 1.1.2 Supplying and laying PVC trunking (PVC casing-n-capping) of size 40 mm. with accessories on wall/ceiling as per specification No: WG- MA/CON, para no. 1.1.2 Supplying and laying PVC box trunking of size 50x16 mm. With accessories on wall/ceiling as per specification No: WG-MA/BOX, para no.1.1.2 Supplying and laying PVC box trunking of size 50x50 mm. With accessories on wall/ceiling as per specification No: WG-MA/BOX, para no. 1.1.2 Supplying and laying PVC box trunking of size 75x50 mm. With accessories on wall/ceiling as per specification No: WG-MA/BOX, para no. 1.1.2
Mtr.
10
5.28
15.00
Mtr.
13
5.28
18.00
Mtr.
17
5.28
22.00
Mtr.
24
5.28
29.00
Mtr.
37
5.28
42.00
Mtr.
50
5.28
55.00
48 64 88 20
1-2-11
Mtr.
24
13.72
38.00
1-2-12
Mtr.
31
13.72
45.00
1-2-13
Mtr.
49
13.72
63.00
67 128 290
1-2-17 1-2-18
Supplying and laying PVC box trunking of size 75x75 mm. With accessories on wall/ceiling as per specification No: WG-MA/BOX, para no.1.1.2 Supplying and laying PVC box trunking of size 100x50 mm. With accessories on wall/ceiling as per specification No: WG-MA/BOX para no. 1.1.2 Supplying and laying PVC slotted box trunking of size 25x25 mm. with accessories on wall/ceiling as per specification No: WG-MA/SLBOX, para no. 1.1.2 Supplying and laying PVC slotted box trunking of size 45x30 mm. with accessories on wall/ceiling as per specification No: WG-MA/SLBOX, para no. 1.1.2 Supplying and laying PVC slotted box trunking of size 60x45 mm. with accessories on wall/ceiling as per specification No: WG-MA/SLBOX, para no. 1.1.2 Supplying and laying PVC slotted box trunking of size 75x75 mm. with accessories on wall/ceiling as per specification No: WG-MA/SLBOX, para no. 1.1.2 Supplying and laying PVC slotted box trunking of size 100x100 mm. with accessories on wall/ceiling as per specification No: WG-MA/SLBOX, para no. 1.1.2 Add Rs 3/- per meter for erecting conduit on stone wall
Mtr. Mtr.
358 459
13.72 13.72
372.00 473.00
1-2-19
Mtr.
56
13.72
70.00
1-2-20
Mtr.
91
13.72
105.00
1-2-21
Mtr.
137
13.72
151.00
1-2-22
Mtr.
221
13.72
235.00
1-2-23
Mtr.
486
13.72
500.00
Note :-
1-3-2
1-3-3
1-3-4
1-3-5
1-3-6
1-3-7
1-3-8
1-3-9
1-3-10
1-3-11
1-3-12
1-3-13
1-3-14
1-3-15
1-3-16
1-3-17
1-3-18
Supplying & erecting mains with 2x1.5 sq.mm F.R solid copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW Supplying & erecting mains with 2x1.5 sq.mm F.R.L.S solid copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW Supplying & erecting mains with 2x2.5 sq.mm F.R stranded/solid copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW Supplying & erecting mains with 2x2.5 sq.mm F.R.L.S stranded/solid copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW Supplying & erecting mains with 2x4 sq.mm F.R stranded/solid copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW Supplying & erecting mains with 2x4 sq.mm F.R.L.S stranded/solid copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW Supplying & erecting mains with 2x6 sq.mm F.R stranded/solid copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW Supplying & erecting mains with 2x6 sq.mm F.R L.S stranded/solid copper PVC insulated wire laid in provided conduit/trunking/insid pole/Bus bars or any other places. as per specification No: WG-MA/BW Supplying & erecting mains with 2x10 sq.mm F.R stranded/solid copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW Supplying & erecting mains with 2x10 sq.mm F.R.L.S stranded/solid copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places as per specification No: WG-MA/BW Supplying & erecting mains with 3x2.5 Sq.mm F.R stranded/solid copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW Supplying & erecting mains with 3x2.5 sq.mm F.R L.S stranded/solid copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW Supplying & erecting mains with 3x4 sq.mm F.R stranded/solid copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW Supplying & erecting mains with 3x4 sq.mm F.R L.S stranded/solid copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW Supplying & erecting mains with 3x6 sq.mm F.R stranded/solid copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars orany other places as per specification No: WG-MA/BW Supplying & erecting mains with 3x6 sq.mm F.R.L.S stranded/solid copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW Supplying & erecting mains with 3x10 sq.mm F.R stranded/solid copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW Supplying & erecting mains with 3x10 sq.mm F.R.L.S stranded/solid copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW
Mtr.
26
6.33
32.00
Mtr.
28
6.33
34.00
Mtr.
39
10.56
50.00
Mtr.
44
10.56
55.00
Mtr.
60
10.56
71.00
Mtr.
65
10.56
76.00
Mtr.
91
10.56
102.00
Mtr.
101
10.56
112.00
Mtr.
160
14.78
175.00
Mtr.
181
14.78
196.00
Mtr.
61
13.72
75.00
Mtr.
65
13.72
79.00
Mtr.
91
13.72
105.00
Mtr.
100
13.72
114.00
Mtr.
138
17.95
156.00
Mtr.
151
17.95
169.00
Mtr.
242
22.17
264.00
Mtr.
272
22.17
294.00
1-3-19
1-3-20
1-3-21
1-3-22
1-3-23
1-3-24
1-3-25 (New)
Note :-
Supplying & erecting mains with 4x16 sq.mm F.R stranded/solid copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW Supplying & erecting mains with 4x16 sq.mm F.R L.S stranded/solid copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW Supplying & erecting mains with 4x25 sq.mm F.R stranded/solid copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW Supplying & erecting mains with 4x25 sq.mm F.R.L.S stranded/solid copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW Supplying & erecting mains with 4x35 sq.mm F.R stranded/solid copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW Supplying & erecting mains with 4x35 sq.mm F.R L.S stranded/solid copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW Supplying & erecting mains with 4x50 sq.mm FR stranded/solid copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW 1) Double the rate of two wire bunch for calculating rate of four wire bunch up to 10 sq mm 2) Continuous running earth wire should be provided of min. 1.5 sq. mm. up to phase wire of 2.5 sq. mm. And further earth wire of half of the size of phase wire is to be used only for light & power load .For Computer wiring size of earth wire shall be of same size as that of phase wire. 3) Rates for the earth wire shall be calculated as one half rate of mains of bunch of two wire and earth wire should be with green colour PVC. 4) For all types of wiring stranded copper wires shall be invariably used.
Mtr.
514
25.34
539.00
Mtr.
562
25.34
587.00
Mtr.
766
30.62
797.00
Mtr.
890
30.62
921.00
Mtr.
1100
30.62
1131.00
Mtr.
1137
30.62
1168.00
Mtr.
1410
30.62
1441.00
1-4-2
1-4-3
1-4-4
1-4-5
1-4-6
1-4-7
Supplying and erecting mains with ISI mark 2 x 2.5 sq. mm. 1100 V. Grade aluminium PVC insulated and PVC sheathed wires on G.I. bearer wire No. 8 SWG complete erected with required size of porcelain reel insulators and 16 SWG G.I. binding wire. Supplying and erecting mains with ISI mark 2 x 4 sq. mm. 1100 V. Grade aluminium PVC insulated and PVC sheathed wires on G.I. bearer wire No. 8 SWG complete erected with required size of porcelain reel insulators and 16 SWG G.I. binding wire. Supplying and erecting mains with ISI mark 2 x 6 sq. mm. 1100 V. Grade aluminium PVC insulated and PVC sheathed wires on G.I. bearer wire No. 8 SWG complete erected with required size of porcelain reel insulators and 16 SWG G.I. binding wire. Supplying and erecting mains with ISI mark 3 x 4 sq. mm. 1100 V. Grade aluminium PVC insulated and PVC sheathed wires on G.I. bearer wire No. 8 SWG complete erected with required size of porcelain reel insulators and 16 SWG G.I. binding wire. Supplying and erecting mains with ISI mark 3 x 6 sq. mm. 1100 V. Grade aluminium PVC insulated and PVC sheathed wires on G.I. bearer wire No. 8 SWG complete erected with required size of porcelain reel insulators and 16 SWG G.I. binding wire. Supplying and erecting mains with ISI mark 4 x 4 sq. mm. 1100 V. Grade aluminium PVC insulated and PVC sheathed wires on G.I. bearer wire No. 8 SWG complete erected with required size of porcelain reel insulators and 16 SWG G.I. binding wire. Supplying and erecting mains with ISI mark 4 x 6 sq. mm. 1100 V. Grade aluminium PVC insulated and PVC sheathed wires on G.I. bearer wire No. 8 SWG complete erected with required size of porcelain reel insulators and 16 SWG G.I. binding wire.
Mtr.
25
9.5
35.00
Mtr.
31
9.5
41.00
Mtr.
39
9.5
49.00
Mtr.
40
13.72
54.00
Mtr.
52
13.72
66.00
Mtr.
489
15.84
505.00
Mtr.
63
25.34
88.00
1-5-2
1-5-3
1-5-4
Supplying & erecting mains with 2x1.5 sq.mm. F.R. copper wire, in 16gauge 20 mm dia. Rigid Steel conduit with continuous GI earth wire of1.5 sq.mm. as per specification No: WG-MA/MC, para no. 1.4.3 Supplying & erecting mains with 2x1.5 sq.mm. F.R.LS copper wire, in 16gauge 20 mm dia. Rigid Steel conduit with continuous GI earth wire of 1.5 sq.mm. as per specification No: WG-MA/MC, para no. 1.4.3 Supplying & erecting mains with 2x2.5 sq.mm. F.R. copper wire, in 16gauge 20 mm dia.Rigid Steel conduit, with continuous GI earth wire of 1.5sq.mm. as per specification No: WG-MA/MC, para no. 1.4.3 Supplying & erecting mains with 2x2.5 sq.mm. F.R.L.S copper wire, in 16gauge 20 mm dia. Rigid Steel conduit, with continuous GI earth wire of 1.5sq.mm. as per specification No: WG-MA/MC, para no. 1.4.3
Mtr.
131
33.78
165.00
Mtr.
132
33.78
166.00
Mtr.
145
39.06
184.00
Mtr.
149
39.06
188.00
1-5-5
1-5-6
1-5-7
1-5-8
1-5-9
1-5-10
1-5-11
1-5-12
1-5-13
1-5-14
1-5-15
1-5-16
1-5-17
1-5-18
1-5-19
1-5-20
1-5-21
1-5-22
1-5-23
1-5-24
Note :-
Supplying & erecting mains with 2x4 sq.mm.F.R copper wire, in 16gauge 20 mm dia. Rigid Steel conduit, with continuous GI earth wire of 2.5sq.mm.as per specification No: WG-MA/MC, para no. 1.4.3 Supplying & erecting mains with 2x4 sq.mm.F.R.L.S. copper wire, in 16gauge 20 mm dia. Rigid Steel conduit, with continuous GI earth wire of 2.5sq.mm. as per specification No: WG-MA/MC, para no. 1.4.3 Supplying & erecting mains with 2x6 sq.mm. F.R. copper wire, in 16gauge20 mm dia. Rigid Steel conduit, with continuous GI earth wire of 4sq.mm.as per specification No: WG-MA/MC, para no. 1.4.3 Supplying & erecting mains with 2x6 sq.mm. F.R.L.S copper wire, in16gauge 20 mm dia. Rigid Steel conduit, with continuous GI earth wire of 4sq.mm. as per specification No: WG-MA/MC, para no. 1.4.3 Supplying & erecting mains with 2x10 sq.mm.F.R copper wire, in 16gauge20 mm dia. Rigid Steel conduit, with continuous GI earth wire of 6sq.mm.as per specification No: WG-MA/MC, para no. 1.4.3 Supplying & erecting mains with 2x10 sq.mm.F.R.L.S copper wire, in 16gauge 20 mm dia. Rigid Steel conduit, with continuous GI earth wire of 6sq.mm. as per specification No: WG-MA/MC, para no. 1.4.3 Supplying & erecting mains with 3x4 sq.mm. F.R.copper wire, in 16gauge20 mm dia. Rigid Steel conduit, with continuous GI earth wire of 2.5sq.mm. as per specification No: WG-MA/MC, para no. 1.4.3 Supplying & erecting mains with 3x4 sq.mm. F.R.L.S copper wire, in 16gauge 20 mm dia. Rigid Steel conduit, with continuous GI earth wire of 2.5sq.mm. as per specification No: WG-MA/MC, para no. 1.4.3 Supplying & erecting mains with 3x6 sq.mm. F.R.copper wire, in 16gauge 20 mm dia. Rigid Steel conduit , with continuous GI earth wire of 4sq.mm.as per specification No: WG-MA/MC, para no. 1.4.3 Supplying & erecting mains with 3x6 sq.mm. F.R.L.S copper wire, in 16gauge 20 mm dia.Rigid Steel conduit, with continuous GI earth wire of 4sq.mm. as per specification No: WG-MA/MC, para no. 1.4.3 Supplying & erecting mains with 3x10 sq.mm.F.R copper wire, in 16gauge 25 mm dia. Rigid Steel conduit, with continuous GI earth wire of 6sq.mm. as per specification No: WG-MA/MC, para no. 1.4.3 Supplying & erecting mains with 3x10 sq.mm.F.R.L.S copper wire, in 16gauge 25 mm dia. Rigid Steel conduit, with continuous GI earth wire of 6sq.mm. as per specification No: WG-MA/MC, para no. 1.4.3 Supplying & erecting mains with 4x4 sq.mm. F.R copper wire, in 16gauge 25 mm dia. Rigid Steel conduit, with continuous GI earth wire of 2.5sq.mm. as per specification No: WG-MA/MC, para no. 1.4.3 Supplying & erecting mains with 4x4 sq.mm. F.R.L.S copper wire, in 16gauge 25 mm dia. Rigid Steel conduit, with continuous GI earth wire of 2.5 sq.mm as per specification No: WG-MA/MC, para no. 1.4.3 Supplying & erecting mains with 4x6 sq.mm.F.R copper wire, in 16gauge 25 mm dia.Rigid Steel conduit, with continuous GI earth wire of 4sq.mm. as per specification No: WG-MA/MC, para no. 1.4.3 Supplying & erecting mains with 4x6 sq.mm.F.R L.S copper wire, in 16gauge 25 mm dia. Rigid Steel conduit, with continuous GI earth wire of 4sq.mm. as per specification No: WG-MA/MC, para no. 1.4.3 Supplying & erecting mains with 4x10 sq.mm.F.R copper wire, in 16gauge 32 mm dia. Rigid Steel conduit, with continuous GI earth wire of 6sq.mm. as per specification No: WG-MA/MC, para no. 1.4.3 Supplying & erecting mains with 4x10 sq.mm.F.R.L.S copper wire, in 16gauge 32 mm dia. Rigid Steel conduit, with continuous GI earth wire of 6sq.mm. as per specification No: WG-MA/MC, para no. 1.4.3 Supplying & erecting mains with 6x6 sq.mm.F.R copper wire, in 16 gauge 2 mm dia. Rigid Steel conduit , with continuous GI earth wire of 4sq.mm.as per specification No: WG-MA/MC, para no. 1.4.3 Supplying & erecting mains with 6x6 sq.mm.F.R.L.S copper wire, in 16 gauge 32 mm dia. Rigid Steel conduit, with continuous GI earth wire of 4sq.mm. as per specification No: WG-MA/MC, para no. 1.4.3 Add Rs 3/- per meter for erecting conduit on stone wall
Mtr.
166
39.06
205.00
Mtr.
171
39.06
210.00
Mtr.
197
39.06
236.00
Mtr.
206
39.06
245.00
Mtr.
267
41.17
308.00
Mtr.
195
41.17
236.00
Mtr.
195
41.17
236.00
Mtr.
243
41.17
284.00
Mtr.
243
47.51
291.00
Mtr.
256
47.51
304.00
Mtr.
366
52.79
419.00
Mtr.
395
52.79
448.00
Mtr.
246
46.45
292.00
Mtr.
256
46.45
302.00
Mtr.
308
46.45
354.00
Mtr.
326
46.45
372.00
Mtr.
493
55.95
549.00
Mtr.
532
55.95
588.00
Mtr.
446
63.34
509.00
Mtr.
472
63.34
535.00
1-6-2
1-6-3
1-6-4
Supplying & erecting mains 2x1.5 sq.mm.and earth wire 1.5 sqmm F R PVC copper wire, in rigid PVC conduit min.20mm dia, as per specification No: WG-MA/PC, para no. 1.4.1 Supplying & erecting mains with 2x1.5 sq.mm.and earth wire 1.5 sqmm FRLS PVC copper wire, in rigid PVC conduit min.20mm dia as per specification No: WG-MA/PC, para no. 1.4.1 Supplying & erecting mains with 2x2.5 sq.mm.and earth wire 2.5 sqmm FR PVC copper wire, in rigid PVC conduit min.20mm dia, as per specification No: WG-MA/PC, para no. 1.4.1 Supplying & erecting mains with 2x2.5 sq.mm.and earth wire 2.5 sqmm FRLS PVC copper wire in rigid PVC conduitmin.20mm dia. as per specification No: WG-MA/PC, para no. 1.4.1
Mtr.
78
10.56
89.00
Mtr.
79
10.56
90.00
Mtr.
92
17.95
110.00
Mtr.
96
17.95
114.00
1-6-5
1-6-6
1-6-7
1-6-8
1-6-9
1-6-10
1-6-11
1-6-12
1-6-13
1-6-14
1-6-15
1-6-16
1-6-17
1-6-18
1-6-19
1-6-20
1-6-21
1-6-22
1-6-23
1-6-24
Note :-
Supplying & erecting mains with 2x4 sq.mm.and earth wire 2.5 sqmm FR PVC copper wire in rigid PVC conduit min.20mm dia,as per specification No: WG-MA/PC, para no. 1.4.1 Supplying & erecting mains with 2x4 sq.mm.and earth wire 2.5 sq mm FRLS PVC copper wire in rigid PVC conduit min.20mm dia, as per specification No: WGMA/PC, para no. 1.4.1 Supplying & erecting mains with 2x6 sq.mm.and earth wire 4 sqmm FR PVC copper wire, in rigid PVC conduit min.20mm dia, as per specification No: WG-MA/PC, para no. 1.4.1 Supplying & erecting mains with 2x6 sq.mm.and earth wire 4 sqmm FRLS PVC copper wire, in rigid PVC conduit min.20mm dia, as per specification No: WGMA/PC, para no. 1.4.1 Supplying & erecting mains with 2x10 sq.mm.and earth wire 6 sqmm FR PVC copper wire, in rigid PVC conduit min.20mm dia, as per specification No: WGMA/PC, para no. 1.4.1 Supplying & erecting mains with 2x10 sq.mm.and earth wire 6 sqmm FRLS PVC copper wire, in rigid PVC conduit min.20mm dia, as per specification No: WGMA/PC, para no. 1.4.1 Supplying & erecting mains with 3x4 sq.mm.and earth wire 2.5 sqmm FR PVC copper wire, in rigid PVC conduit min.20mm dia, as per specification No: WGMA/PC, para no. 1.4.1 Supplying & erecting mains with 3x4 sq.mm.and earth wire 2.5 sqmm FRLS PVC copper wire, in rigid PVC conduit min.20mm dia, as per specification No: WGMA/PC, para no. 1.4.1 Supplying & erecting mains with 3x6 sq.mm.and earth wire 4 sqmm FR PVC copper wire, in rigid PVC conduit min.20mm dia, as per specification No: WGMA/PC, para no. 1.4.1 Supplying & erecting mains with 3x6 sq.mm.and earth wire 4 sqmm FRLS PVC copper wire, in rigid PVC conduit min.20mm dia, as per specification No: WGMA/PC, para no. 1.4.1 Supplying & erecting mains with 3x10 sq.mm.and earth wire 6 sqmm FR PVC copper wire, in rigid PVC conduit min.25mm dia. as per specification No: WGMA/PC, para no. 1.4.1 Supplying & erecting mains with 3x10 sq.mm.and earth wire 6 sqmm FRLS PVC copper wire, in rigid PVC conduit min.25mm dia,as per specification No: WGMA/PC, para no. 1.4.1 Supplying & erecting mains with 4x4 sq.mm.and earth wire 2.5 sqmm FR PVC copper wire, in rigid PVC conduit min.25mm dia, as per specification No: WGMA/PC, para no. 1.4.1 Supplying & erecting mains with 4x4 sq.mm.and earth wire 2.5 sqmm FRLS PVC copper wire, in rigid PVC conduit 25mm dia, as per specification No: WG-MA/PC, para no. 1.4.1 Supplying & erecting mains with 4x6 sq.mm.and earth wire 4 sqmm FR PVC copper wire, in rigid PVC conduit 25mm dia, as per specification No: WGMA/PC, para no. 1.4.1 Supplying & erecting mains with 4x6 sq.mm.and earth wire 4 sqmmFRLS PVC copper wire, in rigid PVC conduit 25mm dia, as per specification No: WG-MA/PC, para no. 1.4.1 Supplying & erecting mains with 4x10 sq.mm.and earth wire 6 sqmm FR PVC copper wire, in rigid PVC conduit 32mm dia, as per specification No: WG-MA/PC, para no. 1.4.1 Supplying & erecting mains with 4x10 sq.mm.and earth wire 6 sqmm FRLS PVC copper wire, in rigid PVC conduit 32mm dia, as per specification No: WG-MA/PC, para no. 1.4.1 Supplying & erecting mains with 6x6 sq.mm.and earth wire 4 sqmm FR PVC copper wire, in rigid PVC conduit 32mm dia, as per specification No: WGMA/PC, para no. 1.4.1 Supplying & erecting mains with 6x6 sq.mm.and earth wire 4 sqmm FRLS PVC copper wire, in rigid PVC conduit 32mm dia, as per specification No: WG-MA/PC, para no. 1.4.1 1) Add Rs. 3/- per meter for erecting mains in PVC/HG conduit on stone wall.
Mtr.
113
17.95
131.00
Mtr.
118
17.95
136.00
Mtr.
144
17.95
162.00
Mtr.
153
17.95
171.00
Mtr.
213
22.17
235.00
Mtr.
233
22.17
255.00
Mtr.
142
22.17
164.00
Mtr.
151
22.17
173.00
Mtr.
190
26.39
216.00
Mtr.
203
30.62
234.00
Mtr.
309
30.62
340.00
Mtr.
338
30.62
369.00
Mtr.
189
23.23
212.00
Mtr.
199
23.23
222.00
Mtr.
251
30.62
282.00
Mtr.
269
30.62
300.00
Mtr.
432
30.62
463.00
Mtr.
471
30.62
502.00
Mtr.
386
38.01
424.00
Mtr.
411
38.01
449.00
1-7-2
Supplying and erecting shockproof 6A ISI mark porcelain base T.Switch / bell push erected on Filled polypropylene ISI marked (IS:14772-2000 board or polished double wooden block / 3 mm thick hylam sheet / 4mm thick plywood pasted with 1.5 mm thick Sunmica with S M screws and duly connected. Supplying and erecting One/Two way piano type ISI mark switch 6A./bell push erected on Filled polypropylene ISI marked (IS:14772-2000) board or double polished wooden board/ folded or screwed board with top of either wooden/ 3 mm thick hylam sheet/ 4mm thick plywood pasted with 1.5 mm thick Sunmica with S M screws and duly connected.
Each
37
6.33
43.00
Each
26
6.33
32.00
1-7-3
Supplying and erecting ISI mark shockproof T. switch 16 A porcelain base surface mounting type / flush mounting type erected on Filled polypropylene ISI marked (IS:14772-2000) board or polished thick varnished double wooden block/folded or screwed board with top of either wooden/ 3 mm thick hylam sheet/ 4mm thick plywood pasted with1.5 mm thick Sunmica with S M screws and duly connected.
Each
52
8.45
60.00
1-7-4
1-7-5
Supplying and erecting ISI mark shockproof piano type porcelain base switch 250 V Each 16 A, erected on Filled polypropylene ISI marked (IS:14772- 2000) board or polished double wooden/ folded or screwed board with top of either wooden/ 3 mm thick hylam sheet/ 4mm thick plywood pasted with 1.5 mm thick Sunmica with S M screws and duly connected. Supplying and erecting ISI mark shockproof 3 pin plug socket 6A with Each porcelain base / flush type erected on Filled polypropylene ISI marked (IS:14772-2000) board or polished thick varnished double wooden block / folded or screwed board with top of either wooden / 3 mm thick hylam sheet/ 4mm thick plywood pasted with 1.5 mm thick Sunmica with S M screws and duly connected. Supplying and erecting ISI mark shockproof 3 pin plug socket 16A with porcelain base/ flush type erected on Filled polypropylene ISI marked (IS:147722000) board or polished thick varnished double wooden block / folded or screwed board with top of either wooden/3 mm thick hylam sheet/ 4mm thick plywood pasted with 1.5 mm thick Sunmica with S M screws and duly connected. Each
56
8.45
64.00
35
6.33
41.00
1-7-6
62
8.45
70.00
1-7-7
Supplying and erecting ISI mark Ceiling rose / Batten holder / Slanting Each holder / pendent holder bakelite base 6A. erected on Filled polypropylene ISI marked (IS:14772-2000) board or polished double wooden block/ ISI mark PVC junction box.Reduce rates by Rs.5/- for erecting accessories on provided board/ junction box. Reduce rate by Rs.5/-for erecting accessories on provided board / junction box. Supplying adaptor for lamp holder 230 V.A.C. supply. Supplying and erecting ISI mark recess type 3 pin plug socket 6A with piano switch 6A erected on M.S Box made of 16 SWG sheet duly painted and covered with bakelite hylam sheet of 3 mm thickness connected with earth terminals and leads duly concealed Supplying and erecting ISI marked recess type 3 pin plug socket 6A with piano switch 6 A combined unit erected on polished double wooden block/ folded or screwed board with top of either wooden or plywood pasted with sunmica and with connecting leads Supplying and erecting ISI mark flush shock proof plug socket 6 pin 6A and 16 A with switch 16A combined unit erected in recess in 16 guage M.S sheet box duly painted and connected with earth terminal and leads Supplying and erecting ISI mark flush type shockproof plug socket 6 pin 6A and 16A with switch 16A combined unit erected on Filled polypropylene ISI marked (IS:14772-2000) board or double wooden block / 3mm thick hylam sheet / 4mm thickplywood pasted with 1.5 mm thick sunmica with S M screws and duly connected. Supplying and erecting flush type shockproof plug socket 6A.& 16A (6 pin) with 16A switch combined with indicator lamp and fuse with gang box on wooden board. Supplying and erecting ISI mark shockproof bell push on Filled polypropylene ISI marked (IS:14772-2000) board or wooden block covered with sunmica with 2 Core (TRS type) PVC insulated copper wire of size 0.5 sq mm 5 m length connected to the point. Supplying and erecting ISI marked recess type 3 pin plug socket 6A with piano switch 6A combined unit erected on M.S box made of 16 guage sheet and covered with sunmica and with connecting leads Concealing the provided MS / PVC switch box in wall with finishing in an approved manner Each Each
15
2.11
17.00
15 74
0 31.67
15.00 106.00
1-7-10
Each
52
9.5
62.00
1-7-11
Each
107
31.67
139.00
1-7-12
Each
96
9.5
106.00
1-7-13
Each
128
13.72
142.00
1-7-14
Each
42
9.5
52.00
1-7-15
Each
68
15.84
84.00
1-7-16
Each
31.67
36.00
1-8-2 1-8-3
Supplying and erecting modular type switch 6A / 10A ISI mark approved make duly erected on provided plate and box with wiring connections complete. Supplying and erecting modular type switch 16A ISI mark approved make duly erected on provided plate and box with wiring connections complete. Supplying and erecting modular type bell-push 6A / 10A ISI mark approved make duly erected on provided plate and box with wiring connections complete. Supplying and erecting modular type bell-push with indicator 2 modules 6A / 10A ISI mark approved make duly erected on provided plate and box with wiring connections complete. Supplying and erecting modular type Two way switch 6A / 10A (2 Module) ISI mark, approved make, duly erected on provided plate and box with wiring connections complete. Supplying and erecting modular type switch 16 / 20 A with indicator, ISI mark, approved make duly erected on provided plate and box with wiring connections complete.
Each
87
9.5
97.00
Each Each
116 101
9.5 9.5
126.00 111.00
1-8-4
Each
113
9.5
123.00
1-8-5
Each
101
9.5
111.00
1-8-6
Each
149
9.5
159.00
1-8-7
1-8-8
1-8-9
1-8-10
1-8-11
1-8-12
Supplying and erecting modular type switch one way 16 / 20 A, ISI mark, approved make duly erected on provided plate and box with wiring connections complete with neon indicator. Supplying and erecting modular type D.P. switch 32A with indicator ISI mark approved make duly erected on provided plate and box with wiring connections complete. Supplying and erecting modular type 32A, DP energy saving switch withBrass KEY TAG ISI mark approved make duly erected on provided plate and box with wiring connections complete. Supplying and erecting modular type 3 pin 6A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete. Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete. Supplying and erecting modular type indicator lamp ISI mark approved make duly erected on provided plate and box with wiring connections complete. Supplying and erecting modular type 6 / 16A fuse unit ISI mark approved make duly erected on provided plate and box with wiring connections complete. Supplying and erecting modular type T.V. socket single outlet ISI mark approved make duly erected on provided plate and box with wiring connections complete. Supplying and erecting modular type telephone socket one gang with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete. Supplying and erecting modular type telephone socket two gang with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete. Supplying and erecting modular type computer Jack RJ 45 with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete. Supplying and erecting modular type bell indicator ISI mark approved make duly erected on provided plate and box with wiring connections complete. Supplying and erecting modular type buzzer 220 / 250V ISI mark approved make duly erected on provided plate and box with wiring connections complete. Supplying and erecting modular type electronic dimmer 400 / 450W one module ISI mark approved make duly erected on provided plate and box with wiring connections complete.
Each
164
9.5
174.00
Each
208
9.5
218.00
Each
399
9.5
409.00
Each
104
9.5
114.00
Each
207
9.5
217.00
Each
63
9.5
73.00
1-8-13
Each
100
9.5
110.00
1-8-14
Each
92
9.5
102.00
1-8-15
Each
90
9.5
100.00
1-8-16
Each
111
9.5
121.00
1-8-17
Each
146
9.5
156.00
1-8-18 1-8-19
Each Each
179 114
9.5 9.5
189.00 124.00
1-8-20
Each
268
9.5
278.00
1-8-21
1-8-22
1-8-23
1-8-24 1-8-25 1-8-26 1-8-27 1-8-28 1-8-29 1-8-30 1-8-31 1-8-32 1-8-33 1-8-34
Supplying and erecting modular type electronic dimmer 600W two module ISI mark approved make duly erected on provided plate and box with wiring connections complete. Supplying and erecting modular type electronic dimmer 1000W two module ISI mark approved make duly erected on provided plate and box with wiring connections complete. Supplying and erecting modular type electronic step regulator two module ISI mark approved make duly erected on provided plate and box with wiring connections complete. Supplying and erecting modular type cover for junction box ISI mark approved make duly erected on provided box. Supplying and erecting modular type blanking plate one module ISI mark approved make duly erected on provided plate & box. Supplying and erecting modular type blanking plate two module ISI mark approved make duly erected on provided plate & box. Supplying and erecting PVC Surface modular switch box with double mounting plate for 1 module complete duly erected in an approved manner. Supplying and erecting PVC Surface modular switch box with double mounting plate for 2 module duly erected in an approved manner. Supplying and erecting PVC Surface modular switch box with double mounting plate for 3 module duly erected in an approved manner. Supplying and erecting PVC Surface modular switch box with double mounting plate for 4 module duly erected in an approved manner. Supplying and erecting PVC Surface modular switch box with double mounting plate for 6 module duly erected in an approved manner. Supplying and erecting PVC Surface modular switch box with inner plate (mounting) & front plate for 8 module complete duly connected. Supplying and erecting PVC Surface modular switch box with double mounting plate for 12 module duly erected in an approved manner. Supplying and erecting PVC Surface modular switch box with double mounting plate for 16 / 18 module duly erected in an approved manner.
Each
375
9.5
385.00
Each
601
9.5
611.00
Each
346
9.5
356.00
Each Each Each Each Each Each Each Each Each Each Each
41.00 19.00 35.00 124.00 124.00 148.00 163.00 222.00 276.00 343.00 366.00
1-8-35
1-8-36
1-8-37
1-8-38
1-8-39
1-8-40
1-8-41
1-8-42
1-8-43
1-8-44
1-8-45
Note :-
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiseling and finishing with cement morter / POP as per required to match the background in an approved manner. Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner. Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner. Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 4 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner. Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner. Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 8 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner. Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner. Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 16 / 18 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner. Supplying and erecting White Footlight with 4 modules concealed modular box and lamp holder with cover complete erected on wall /flush to wall with necessary chiselling in wall and finishing with cement and morter / POP as per required and duly connected in an approved manner. Supplying and erecting White Footlight with 8 modules concealed modular box and lamp holder with cover complete erected on wall /flush to wall with necessary chiselling in wall and finishing with cement and morter / POP as per required and duly connected in an approved manner. Supplying and erecting 16 / 20 / 25 A starter (modular range) 2 module for AC unit on provided box complete & duly concealed with necessary material and connected. Supplying and erecting 6 to 32 A SPMCB suitable to fix in 1 module of modular switch in provided box complete & duly concealed with necessary material and connected. Supplying and erecting 16 to 32 A DPMCB suitable to fix in 2 module of modular switch in provided box complete & duly concealed with necessary material and connected. For supplying and erecting modular switches without box, deduct following amount from overall rates of respective above items 1) Rs 31/- for 1& 2 module plate 2) Rs 38/- for 3 module plate 3) Rs 43/- for 4 module plate 4) Rs 75/- for 6 module plate 5) Rs 86/- for 8 module plate 6) Rs 102/- for 12 module plate 7) Rs 143/- for 16/18 module plate
Each
96
85.51
182.00
Each
104
85.51
190.00
Each
104
85.51
190.00
Each
128
85.51
214.00
Each
212
85.51
298.00
Each
261
141.46
402.00
Each
261
141.46
402.00
Each
334
141.46
475.00
Each
485
85.51
571.00
Each
605
85.51
691.00
Each
456
43.28
499.00
Each
124
9.5
134.00
Each
285
9.5
295.00
1-9-2
1-9-3
1-9-4
1-9-5
Point wiring for light/fan/bell in 20 mm metal conduit with 1.0 sqmm FR grade Copper wire with flush type switch and required accessaries as per specification No: WG-PW/SW Point wiring in for light/fan/bell in 20 mm metal conduit with 1.0 sqmm FRLS grade Copper wire with flush type switch and required accessaries as per specification No: WG-PW/SW Point wiring for independent plug in 20 mm metal conduit with 1.0 sqmm FR grade Copper wire with flush type switch and required accessaries as per specification No: WG-PW/SW Point wiring for independent plug in 20 mm metal conduit with 1.0 sqmm FRLS grade Copper wire with flush type switch and required accessaries as per specification No: WG-PW/SW Point wiring for light/fan/bell in 20 mm rigid PVC conduit with 1.0 sqmm FR grade Copper wire with flush type switch and required accessaries as per specification No: WG-PW/SW
Point
492
172.08
664.00
Point
497
172.08
669.00
Point
501
193.19
694.00
Point
506
193.19
699.00
Point
334
91.85
426.00
1-9-6
1-9-7
1-9-8
1-9-9
1-9-10
1-9-11
1-9-12
1-9-13 1-9-14
Point wiring for light/fan/bell in 20 mm rigid PVC conduit with 1.0 sqmm FRLS grade Copper wire with flush type switch and required accessaries as per specification No: WG-PW/SW Point wiring for independent plug in 20 mm rigid PVC conduit with 1.0 sqmm FR grade Copper wire with flush type switch and required accessaries as per specification No: WG-PW/SW Point wiring for independent plug in 20 mm rigid PVC conduit with 1.0 sqmm FRLS grade Copper wire with flush type switch and required accessaries as per specification No: WG-PW/SW Point wiring for light/fan/bell consealed type in min 20 mm PVC conduit with 1.5 sq.mm. FR grade copper wires with moduler type switch and required accessaries as per specification No: WG-PW/CW Supplying and Drawing of 2x1.5 sq.mm. FRLS grade copper wires in provided concealed pipes for concealed type light/fan/bell point wiringand terminating on modular accessories in box for point wiring for light/fan/bell as per specification No: WG-PW/CW Point wiring for independent plug, concealed type in min 20 mm PVC conduit with 1.5 sq.mm FRLS grade copper wires with moduler type switch and socket and required accessaries as per specification No WGPW/SW Supplying and drawing of 2x1.5 sq.mm. FRLS grade copper wires in provided concealed pipes and terminating on moduler accessories in box for point wiring for independent plug as per specification No WG-PW/SW Wiring for plug on board with Switch socket with copper wiring and earthing as per specification No:WG-PW/SW Wiring for plug on board with Switch socket concealed type with copper wiring, earthing and with modular accessories as per specification No: WG- PW/CW Conversion of light point into fan point in PVC conduit / PVC truncking with suitable Filled polypropylene ISI marked (IS:14772-2000) board or double wooden board for regulator, switches and with ceiling rose erected on PVC block. Point wiring in PVC trunking (casing-capping) with 1.0 sqm FR grade copper wire with flush type switchand required accessaries as per specification No: WG-PW/SW Point wiring in PVC trunking (casing-capping) with 1.0 sqm FRLS grade copper wire with flush type switch and required accessaries as per specification No: WG-PW/SW Point wiring for independent plug in PVC trunking (casing-capping) with 1.0 sqm FR grade copper wire with flush type switchand required accessaries as per specification No: WG-PW/SW Point wiring for independent plug in PVC trunking (casing-capping) with 1.0 sqm FRLS grade copper wire with flush type switchand required accessaries as per specification No: WG-PW/SW Concealing provided M.S./ PVC switch box in wall with finishing in an approved manner as per specification No: WG-PW/CW Concealing of provided ISI mark G.I. pipe/H.G. screwed conduit/PVC pipe in wall/floor/false ceiling complete as per specification No:WG- PW/CW Refilling the holes for dismantled point wiring with cement mortar & finishing in an approved manner. 1) For point wiring above 6 meters of length of, add 10 % of overall rate of point wiring for every additional 1 meter length or part thereof. 2)Point wiring starts from Main board/Intermediate switch board and suitable circuit mains are to be provided from D.B. to first board and between boards. 3) For point wiring in stair case with 2 way control point increase overall rate by 50 % of light point wiring. 4) For wiring on stone wall add Rs 15.00 per point wiring. 5) For covering at wall entries acrylic sheet of appropriate size shall be provided. (Refer Item No. 6-1-9) 6) Whenever point wiring with modular switches are required add Rs. 136 /- per point for light ,bell,exhaust fan & Fan point, Rs. 228/- for independent plug point or plug on board. 7) For Concealed point wiring, instead of Modular switches & accessories, ordinary switches & accessories are to used, than deductRs. 136 /- for point wiring & Rs. 228 /- for Independent plug point wiring and Rs. 228 /- for plug on board, from overall rates. 8) Deduct Rs 31/- from overall rate of point wiring for Light/fan/bell/exhaust fan point and Rs 38/- from overall rate of pointwiring for IP/Plug on board if point wiring to be provided without modular box (i.e point wiring to be provided on modular furniture or such parallel installations where modular box is not required) 9) For Concealed type wiring only FR Grade wire shall be used. FR - Fire Retardant FRLS - Fire Retardant Low Smoke.
Point
339
91.85
431.00
Point
342
114.02
456.00
Point
348
114.02
462.00
Point
439
233.31
672.00
Point
337
90.79
428.00
Point
742
264.98
1007.00
Point
543
90.79
634.00
Point Point
62 315
13.72 55.95
76.00 371.00
1-9-15
Point
39
30.62
70.00
1-9-16
Point
193
98.18
291.00
1-9-17
Point
198
98.18
296.00
1-9-18
Point
306
118.24
424.00
1-9-19
Point
312
118.24
430.00
13 13 12
Note :-
Supplying & erecting telephone cable 1 pair with 0.5 mm dia. laid in provided PVC casing / conduit as per specification No. WG-TW
Mtr.
2.11
9.00
1-10-2 1-10-3 1-10-4 1-10-5 1-10-6 1-10-7 1-10-8 1-10-9 1-10-10 1-10-11 1-10-12 1-10-13 1-10-14 1-10-15
Supplying & erecting telephone cable 2 pair with 0.5 mm dia. laid in provided PVC casing / conduit asper specification No. WG-TW Supplying & erecting telephone cable 3 pair with 0.5 mm dia. laid in provided PVC casing / conduit as per specification No. WG-TW Supplying & erecting telephone cable 4 pair with 0.5 mm dia. laid in provided PVC casing / conduit as per specification No. WG-TW Supplying & erecting telephone cable 5 pair with 0.5 mm dia. laid in provided PVC casing / conduit as per specification No. WG-TW Supplying & erecting telephone cable 10 pair with 0.5 mm dia. laid in provided PVC casing / conduit asper specification No. WG-TW Supplying & erecting telephone cable 20 pair with 0.5 mm dia. laid in provided PVC casing / conduit asper specification No. WG-TW Supplying & erecting telephone cable 50 pair with 0.5 mm dia. laid in provided PVC casing / conduit asper specification No. WG-TW Supplying & erecting telephone cable 100 pair with 0.5 mm dia. laid in provided PVC casing / conduit as per specification No. WG-TW Supplying & erecting Jelly filled armoured telephone cable 10 pair with0.5 mm dia. laid in provided trench asper specification No. WG-TW Supplying & erecting Jelly filled armoured telephone cable 20 pair with 0.5 mm dia. laid in provided trench as per specification No. WG-TW Supplying & erecting Jelly filled armoured telephone cable 50 pair with 0.5 mm dia. laid in provided trench as per specification No. WG-TW Supplying & erecting Jelly filled armoured telephone cable 100 pair with 0.5 mm dia. laid in provided trench as per specification No. WG-TW Supplying & erecting Jumper wire with 0.5 mm dia as per specification No. WG-TW Supplying & installing Co-axial cable low voltage grade RG-11 as per specification No. WG-TW
Mtr. Mtr. Mtr. Mtr. Mtr. Mtr. Mtr. Mtr. Mtr. Mtr. Mtr. Mtr. Mtr. Mtr.
5.28 5.28 5.28 5.28 5.28 7.39 7.39 7.39 7.39 7.39 7.39 7.39 2.11 2.11
17.00 22.00 28.00 33.00 55.00 101.00 238.00 451.00 90.00 124.00 225.00 398.00 17.00 56.00
Supplying, erecting & commissioning Main Distribution Frame (MDF) Box 50x50 pairs as per specification No. WG-TW Supplying, erecting & commissioning MDF Box 60 x 60 pairs as per specification No. WG-TW Supplying, erecting & commissioning MDF Box 100 x 100 pairs as per specification No. WG-TW Supplying, erecting & commissioning MDF Box 150 x 150 pairs as per specification No. WG-TW Supplying, erecting & commissioning MDF Box 200 x 200 pairs as per specification No. WG-TW Supplying, erecting & commissioning MDF Box 250 x 250 pairs as per specification No. WG-TW Supplying, erecting & commissioning MDF Box 300 x 300 pairs as per specification No. WG-TW Supplying, erecting & commissioning MDF Box 400 x 400 pairs as per specification No. WG-TW Supplying, erecting & commissioning MDF Box 500 x 500 pairs as per specification No. WG-TW Supplying, erecting & commissioning MDF Box 600 x 600 pairs as per specification No. WG-TW Supplying, erecting & commissioning MDF Box 800 x 800 pairs as per specification No. WG-TW Supplying, erecting & commissioning Junction box suitable for 10 pairs as per specification No. WG-TW Supplying, erecting & commissioning Junction box suitable for 20 pairs as per specification No. WG-TW Supplying, erecting & commissioning Junction box suitable for 30 pairs as per specification No. WG-TW Supplying, erecting & commissioning Junction box suitable for 40 pairs as per specification No. WG-TW Supplying, erecting & commissioning Junction box suitable for 50 pairs as per specification No. WG-TW Supplying, erecting & commissioning Junction box suitable for 60 pairs as per specification No. WG-TW Supplying, erecting & commissioning Junction box suitable for 100 pairs as per specification No. WG-TW Supplying, erecting & commissioning Junction box suitable for 150 pairs as per specification No. WG-TW Supplying, erecting & commissioning Krone module of 10 pairs as per specification No. WG-TW Supplying & erecting Over Voltage protection Magazine suitable for 10 pair as per specification No. WG-TW Supplying & erecting Rosette box RJ type Bakelite box on wall with LED indication duly connected as per specification No. WG-TW Supplying, installing, testing & commissioning analogue type PBX (Private Branch Exchange ) of 3 x 8 extension as per specification No. WG-TW Supplying, installing, testing & commissioning analogue type PBX 4 x 12 extension as per specification No. WG-TW
Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Job Job
1516 1589 2423 3330 4986 5893 7108 10400 12918 15098 23107 520 557 748 784 922 959 1437 1754 207 206 86 17599 19418
142.52 142.52 142.52 203.75 203.75 330.43 330.43 456.06 659.81 659.81 658.76 41.17 41.17 41.17 41.17 41.17 61.23 106.63 106.63 164.69 38.01 12.67 1445.25 1445.25
1659.00 1732.00 2566.00 3534.00 5190.00 6223.00 7438.00 10856.00 13578.00 15758.00 23766.00 561.00 598.00 789.00 825.00 963.00 1020.00 1544.00 1861.00 372.00 244.00 99.00 19044.00 20863.00
Supplying, installing, testing & commissioning analogue type PBX 4 x 24 extension as per specification No. WG-TW Supplying, installing, testing & commissioning analogue type PBX 4 x 32 extension as per specification No. WG-TW Supplying, installing, testing & commissioning analogue type PBX 8 x 24 extension as per specification No. WG-TW Supplying, installing, testing & commissioning analogue type PBX 8 x 32 extension as per specification No. WG-TW Supplying, installing, testing & commissioning analogue type PBX 8 x 40 extension as per specification No. WG-TW Supplying, installing, testing & commissioning Digital type EPABX (Electronic Private Automatic Branch Exchange) of 8 x 16 extension as per specification no. WG TW Supplying, installing, testing & commissioning Digital type EPABX 8 x 24 extension as per specification No. WG-TW Supplying, installing, testing & commissioning Digital type EPABX 8 x 32 extension as per specification No. WG-TW Supplying, installing, testing & commissioning Digital type EPABX 8 x 40 extension as per specification No. WG-TW Supplying, installing, testing & commissioning Digital type EPABX 8 x 48 extension as per specification No. WG-TW 1.12 Computer Cabling (WG-COC) Supplying & installing UTP networking Cat-6 cable suitable for LAN / WAN Computer net-working as per specification No. WG-COC/NC Supplying & installing UTP networking Cat-6+ cable suitable for LAN / WAN Computer net-working as per specification no. WG-COC/NC Supplying and fixing 1 meter length, UTP Patch cord of Cat 6 type in position as per specification No. WG-COC/PC Supplying and fixing 3 meter length, UTP Patch cord of Cat 6 type in position as per specification No. WG-COC/PC Supplying and erecting FR grade, PVC armoured multimode Optical Fibre Cable with 6 fibres, with core dia 50 m, suitable for 1 GBps ethernet distance at 850 nm of wavelength, on wall/ceiling or laid in provided pipe/trench as per specification No. WG-COC/OFC Supplying and erecting FR grade, PVC armoured multimode Optical Fibre Cable with 12 fibres, with core dia 50 m, suitable for 1 GBps ethernet distance at 850 nm of wavelength, on wall/ceiling or laid in provided pipe/trench as per specification No. WG-COC/OFC Supplying and erecting FR grade, PVC armoured multimode Optical Fibre Cable with 24 fibres, with core dia 50 m, suitable for 1 GBps ethernet distance at 850 nm of wavelength, on wall/ceiling or laid in provided pipe/trench as per specification No. WG-COC/OFC Supplying and erecting FR grade, PVC armoured multimode Optical Fibre Cable with 6 fibres, with core dia 62.5 m, suitable for 1 GBps ethernet distance at 850 nm of wavelength, on wall/ceiling or laid in provided pipe/trench asper specification No. WG-COC/OFC Supplying and erecting FR grade, PVC armoured multimode Optical Fibre Cable with 12 fibres, with core dia 62.5 m, suitable for 1 GBps ethernet distance at 850 nm of wavelength, on wall/ceiling or laid in provided pipe/trench as per specification No. WG-COC/OFC Supplying and plugging FRLS duplex 1 meter length, Fibre Patch cord into the LC/FC/SC/ST termination of LIU & fibre module/ fibre switch port complete as per specification No. WG-COC/FPC 1.13 Networking Components (WG- COC/NWC) Supplying, fixing, and configuring Web Smart Power over Ethernet Switch of 24 Ports , 4-GB Ports and 2 SFP slots with WebView , on provided rack or as directed as per specification No. WG-NWC/ENS Supplying, fixing, and configuring GB Managed Ethernet Switch of 24 Ports with 2 SFP Combo slots and WebView, on provided rack or as directed as per specification no. WG-NWC/GBS Supplying, fixing, and configuring Broadband ADSL Router with all accessories, on provided rack or as directed as per specification No. WGNWC/ADSL Supplying and fixing Indoor LAN Dipole Antenna suitable for Wireless LAN with all accessories as per specification No. WG-NWC/DPA Supplying and fixing Omni Directional Antenna suitable for Wireless LAN with all accessories as per specification No. WG-NWC/ODA Supplying and fixing Aesthetic Omni Directional Antenna suitable for Wireless LAN with all accessories as per specification No. WG- NWC/AODA
1-12-6
Mtr.
168
34.84
203.00
1-12-7
Mtr.
461
34.84
496.00
1-12-8
Mtr.
106
34.84
141.00
1-12-9
Mtr.
162
34.84
197.00
1-12-10
Each
2823
34.84
2858.00
1-13-1
Each
38610
2755.38
41365.00
1-13-2
Each
37106
2066
39172.00
1-13-3
Each
1512
482.45
1994.00
Supplying, installing & testing UTP Connector (RJ-45) as per specification No. WG-NAS/UTPC. Supplying and fixing Tool-less Information Outlet (Ethernet) flush/surface type in position as per specification no. WG-NAS/IO
Each Each
14 493
7.39 34.84
21.00 528.00
1-14-6
1-14-7
Supplying and fixing Tool-less Keystone Jack (RJ-45) in provided Patch Panel complete as per specification no. WG-NAS/KJ Supplying and fixing 24 port Patch Panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP Supplying and fixing Wall/Rack type 12 Ports, Light guide Interconnect Unit for termination of Optical fibre cables on wall/ provided U Rack complete as per specification no. WG-NAS/ LIU Supplying and fixing Wall/Rack type 24 Ports, Light guide Interconnect Unit for termination of Optical fibre cables on wall/ provided U Rack complete as per specification no. WG-NAS/ LIU Supplying and fixing ST "D" type Multimode Adaptor to couple two connectors between OFC & Fibre switch/Fibre module as per specification no. WG-NAS/MMA Supplying and fixing ST "D" type Multimode connector for LIU to terminate OFC in LIU. as per specification no. WG-NAS/LIU1 Supplying and fixing No Epoxy No Polish, ST "D" type Multimode connector for LIU to terminate OFC in LIU as per specification No. WGNAS/LIU2 Supplying and fixing Power over Ethernet Adaptor to provide DC supply to Ehternet devices as per specification No. WG-NAS/PEA Supplying and fixing 36 U Rack for Networking with necessary arrangement for fixing required 16A/6A Switches & Plugs for LAN network as per specification No. WGNAS/RAK Supplying and fixing Wireless PCI LAN (108 Mbps) card in provided computer as per specification No. WG-NAS/LANC2 Supplying and fixing Manageable Wireless LAN Access Point with PoE (Power over Ethernet) in WLAN network as per specification no. WG- NAS/LAP1 Supplying and fixing High Performance Manageable Wireless LAN Access Point with PoE (Power over Ethernet) in WLAN network as per specification no. WGNAS/LAP2 Supplying and fixing Dual Band High Performance Manageable Wireless LAN Access Point with PoE (Power over Ethernet) in WLAN network as per specification as No. WG-NAS/LAP3 1.15 Dismantling Dismantling the existing light, fan, bell, clock, independent plug point, wiring with mains of all types alongwith accessories etc.Complete as per specification No: WGPW/DM Dismantling the existing Telephone / Lan / Wan / TV cables and wires of all sizes along with casing-capping / conduit complete as per specification No: WG-PW/DM Dismantled material of Point wiring shall be retained by contractor.
Each
6944
826.61
7771.00
Each
224
68.62
293.00
1-14-8 1-14-9
Each Each
865 865
413.83 175.25
1279.00 1040.00
1-14-10 1-14-11
Each Each
2727 29120
175.25 1102.15
2902.00 30222.00
1-14-12 1-14-13
Each Each
1811 13914
482.45 2066
2293.00 15980.00
1-14-14
Each
26058
2755.38
28813.00
1-14-15
Each
53794
6357.43
60151.00
1-15-1
Point
-1
5.28
4.00
1-15-2
Mtr.
-1
5.28
4.00
Note :-
Supplying & erecting GLS lamp 230 V, 10 W.. Supplying & erecting GLS lamp 230 V, 15 W. Supplying & erecting GLS lamp 230 V, 25 W. Supplying & erecting GLS lamp 230 V, 40 W. Supplying & erecting GLS lamp 230 V, 60 W. Supplying & erecting GLS lamp 230 V,100 W. Supplying & erecting Electronic night lamp 0.5 W LED high glow. Supplying & erecting milky / coated / frosted lamp 250 V 40W / 60W Supplying & erecting fluorescent tube day light 600 mm, 18W Supplying & erecting fluorescent tube day light 1200 mm, 36W Supplying & erecting T5 28W Energy efficient fluorescent tube. Supplying & erecting T8 36W fluorescent tube tri-Phospher/Tru- band phospher with 3250 lumen output. Supplying and erecting T-5 14W Energy efficient fluoroscent tube. Supplying and erecting T-5 24W Energy efficient fluoroscent tube. Supplying & erecting pigmy /candle lamp miniature type coloured / white. Supplying & erecting M V lamp 3 pin BC / Screwed cap head / pin type 230 V, 80 W. Supplying & erecting MV lamp 3 pin BC / Screwed cap head / pin type 230 V, 125 W. Supplying & erecting MV lamp 3 pin BC / Screwed cap head / pin type 230 V, 250 W. Supplying & erecting MV lamp 3 pin BC / Screwed cap head / pin type 230 V, 400 W. Supplying & erecting Mercury blended lamp 230 V, 160 W. Supplying & erecting H.P.S.V. lamp 3 pin B.C / screwed cap head type 230 V, 70W [SON type] Supplying & erecting H.P.S.V.lamp 3 pin B.C./ screwed cap head type 230 V, 150W [SON type]
Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each
15 14 15 16 16 16 207 18 50 51 134 97 131 178 24 180 185 367 485 267 382 579
1.06 1.06 1.06 1.06 1.06 1.06 1.06 1.06 1.06 2.11 2.11 2.11 2.11 2.11 1.06 15.84 15.84 15.84 15.84 15.84 15.84 15.84
16.00 15.00 16.00 17.00 17.00 17.00 208.00 19.00 51.00 53.00 136.00 99.00 133.00 180.00 25.00 196.00 201.00 383.00 501.00 283.00 398.00 595.00
2-1-23 2-1-24 2-1-25 2-1-26 2-1-27 2-1-28 2-1-29 2-1-30 2-1-31 2-1-32 2-1-33 2-1-34 2-1-35 2-1-36 2-1-37 2-1-38 2-1-39 2-1-40 2-1-41 2-1-42 2-1-43 2-1-44 2-1-45 2-1-46 2-1-47 2-1-48 (New) 2-1-49 (New)
Supplying & erecting H.P.S.V.lamp 3 pin B.C./ screwed cap head type 230 V, 250W [SON type] Supplying & erecting H.P.S.V.lamp threaded type 230V, 400W [SON type] Supplying and erecting H.P.S.V. lamp 3 pin B.C. type 230V, 70W [SON-T type] Supplying & erecting H.P.S.V. lamp threaded type 230V,150W [SON-T type.] Supplying & erecting H.P.S.V.lamp threaded type 230V, 250W [SON-T type] Supplying and erecting H.P.S.V.lamp 3 pin B.C./screwed cap head type 230V, 400W [SON-T type] Erection of departmently supplied H.P.S.V./ H.P.M.V ./ SON / SON-T Lamp Supplying & erecting Metal Halide lamp,double ended, 230V,70W. Supplying & erecting Metal Halide lamp, double ended, 230V, 150 W. Supplying & erecting Metal Halide lamp,230V, 250 W double ended. Supplying & erecting Metal Halide lamp,230V, 400 W double ended. Supplying & erecting Halogen lamp 230 V. 500 W Supplying & erecting Halogen lamp 230 V. 1000 W Supplying & erecting compact fluo.lamp 10 / 13 W, 230 V, to be used with provided ballast Supplying & erecting compact fluo.lamp18 W, 230V to be used with provided ballast Supplying & erecting compact fluo.lamp 5 / 7 / 9 / 11 W, 230 V to be used with provided ballast. Supplying & erecting compact fluo.lamp 36 W, 230 V to be used with provided ballast. Supplying and erecting compact fluo.lamps 2 W, 230V intergral type complete with ceramic adopter p.f more than 0.9 Supplying and erecting compact fluoresent lamp 5W / 8 W, 230V integral type complete with ceramic adopter and having p.f more than 0.9 Supplying and erecting compact fluo.lamps 9 / 11 W, 230V.intergral type complete with ceramic adopter and having p.f more than 0.9 Supplying and erecting compact fluo.lamps 14 / 15 W, 230V intergral type complete with ceramic adopter and having p.f more than 0.9 Supplying and erecting compact fluo.lamps 18 to 20 W, 230V, intergral type complete with ceramic adopter and having p.f more than 0.9 Supplying and erecting compact fluorescent lamp 22 to 26 W, 230 V integral type complete with ceramic adopter and having p.f more than 0.9 Supplying and erecting compact fluo.lamps 27 to 36 W, 230V.intergral type complete with ceramic adopter and having p.f more than 0.9 Supplying and erecting compact fluo.lamps 45 / 65 W, 230V. intergral type complete with ceramic adopter and having p.f more than 0.9 Supplying and erecting LED lamps 2/3 W, 230V. intergral type complete with ceramic adopter and having p.f more than 0.9 Supplying and erecting LED lamps 5 W, 230V. intergral type complete with ceramic adopter and having p.f more than 0.9 1) On Govt installation ,energy efficient lamps (CFL, T-5, T-8 (tri-band phosphor)) shall be preferably used. 2) Use of GLS lamps shall be avoided and also to be intimated to other departments. 3) For use of Single ended Metal Halide Lamp increase overall rate by 40 % in the rate for Double ended lamp. (2-1-30 to 2-1-33) 4) On Govt. installation use of Electronic chokes/energy saver accessories, are mandatory and as such conventional chokes shall not be used. 5) Lamps & tubes shall be used invariably of three star and above ratings as per BEE circular. 6) Above rates are for lamps to be provided in new fittings and if lamps are to be provided/replaced in existing fittings add in labour rate Rs 5/- for tubes and Rs.10/for MV/SV/MH lamps.
Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each
643 778 396 602 667 801 0 661 719 1071 1130 103 115 131 151 98 214 105 139 144 156 203 232 343 706 260 677
15.84 15.84 15.84 15.84 15.84 15.84 15.84 15.84 15.84 15.84 15.84 15.84 15.84 15.84 15.84 15.84 15.84 2.11 2.11 2.11 2.11 2.11 2.11 2.11 2.11 3.17 3.17
659.00 794.00 412.00 618.00 683.00 817.00 16.00 677.00 735.00 1087.00 1146.00 119.00 131.00 147.00 167.00 114.00 230.00 107.00 141.00 146.00 158.00 205.00 234.00 345.00 708.00 263.00 680.00
Note :-
2-2-2
2-2-3
2-2-4 2-2-5
Supplying table lamp with M.S. tube with flexible joints complete suitable for lamp 1XPL- 5 / 7/ 9 W complete with lamp and 3 core round plastic flexible cord with 6A 3 pin hand shield type plug top. Supplying shock proof type hand lamp with lamp holder,guarded glass and 10 mtrs of 3 core PVC flexible cord with hand shield type 3 pin 6 Amp plug top. Supplying approved make fluorescent tube type table lamp with anodized reflector and square M.S. tubes fixed with flexible joints complete with 9/10 W. fluorescent tube,high density polyester copper wound choke with starter, base condenser and 2m long 3 core round PVC flexible cord with hand shield type 6 A, 3 pin plug top complete. Supplying and erecting plain pendent type bakelite lamp holder complete erected at position with necessary length of twin flexible wire.(upto 1m) Supplying and erecting plain pendent type brass lamp holder complete erected at position with 20 cms glass opal shade with necessary length of twin twisted flexible wire 24 / 0.20 mm.(upto1m)
Each
995
995.00
Each
139
139.00
Each
292
292.00
Each Each
43 81
8.45 8.45
51.00 89.00
2-2-6
2-2-15
2-2-16
2-2-17
2-2-18
2-2-19
2-2-20
2-2-21
2-2-22
2-2-23
2-2-24
2-2-25
2-2-26
2-2-27
2-2-28
Supplying and erecting Rod Pendent light with 20 mm dia. H.G. screwed conduit of 16 SWG duly painted with ball suspension plate, with glass opal shade complete erected on polished double wooden block with necessary PVC wire leads. Supplying and erecting one light Wall bracket fitting with dome complete fixed on the wall. Supplying and erecting one light wall bracket MS body & arm Chromium plated/ powder coated complete fixed on wall. Supplying and erecting glass shade of suitable size and shape of approved colour and quality on existing decorative fitting Supplying and erecting bulkhead fitting suitable for integral CFL fixed on wall. As per specification no.FG-IDF/BHF Supplying and erecting bulkhead fitting suitable for non integral CFL , with electronic ballast complete fixed on wall. As per specification no.FGIDF/BHF Supplying and erecting luminaries suitable for 9/13/18 W CFL lamp,fixed on wall above mirror as per specification no.FG-IDF/ML1 Supplying and erecting 1 light wall bracket Aluminum body & arm anodised / powder coated with decorative glass shade fixed on wall. Supplying and erecting spot light / reading light suitable for CFL 5/9/11W complete metal body powder coated / painted with angular movement erected on wooden block and connected. Supplying and erecting 2 light wall bracket Aluminum body & arm anodised / powder coated complete with lamp holder and decorative glass shade suitably erected on polished wooden board / plywood pasted with laminate. Supplying and erecting 1 light fancy wall bracket with arm fabricated from brass duly lacquered with suitable holder and fancy glass shade duly wired erected on wall with suitable size of polished wooden / laminated board. Supplying and erecting 2 light fancy wall bracket with arm fabricated from brass duly lacquered with suitable holder and fancy glass shade duly wired erected on wall with suitable size of polished wooden / laminated board. Supplying and erecting Mirror light fitting with 1 x 9 W CFL, with necessary Choke & accessories complete erected on polished wooden / sunmica block as per specification no. FG-IDF/ML2 Supplying & erecting approved type suspension type decorative pendent fitting single light with anodized aluminium / powder coated MS rod up to 1 m length and canopy on top provided with decorative glass shed duly wired with two core flat wire suitable lamp holder complete. Supplying & erecting approved type suspension type decorative fitting with rise /fall arrangement, 1 light inside semi circular metallic reflector with counterweight with guide pulley / spring buffer with work shop type copper flexible wire complete with necessary hook, if required Supplying and erecting circular type recessed / surface down lighter with reflector and glass cover suitable for CFL 1 x 9 to 18 watts with circular stainless steel ring including Electronic Ballast having pf > 0.98 and holder duly fixed in false ceiling as per specification no. FG -IDF/DL1 Supplying and erecting square type recessed / surface down lighter with reflector and glass cover suitable for CFL 1 x 9 to 18W with square type stainless steel border including electronic ballast and holder duly fixed in false ceiling as per specification no. FG-IDF/DL1 Supplying and erecting circular type recessed / surface down lighter with reflector and glass cover suitable for CFL 2 x 9 to 18 watts with circular stainless steel ring including Electronic Ballast having pf > 0.98 and holder duly fixed in false ceiling as per specification no. FG -IDF/DL1 Supplying and erecting square type recessed / surface down lighter with reflector and glass cover suitable for CFL 2 x 9 to 18W with square type stainless steel border including Electronic Ballast having pf > 0.98 and holder duly fixed in false ceiling as per specification no. FG-IDF/DL1 Supplying and erecting square/ circular type recessed / surface down lighter with glass cover suitable for CFL 2x18W including gear box, fixed in false ceiling as per specification no.FG-IDF/DL1 Supplying and erecting approved make recessed / surface down lighter with mirror optics of 100 mm suitable for 1 x 9 to 18 W compact flou. Lamp, fixed in false ceiling as per specification no.FGIDF/MOF Supplying and erecting approved make recessed / surface down lighter with mirror optics of 100 mm suitable for 2 x 9 to 18 W compact flou. lamp fixed in false ceiling as per specification no.FGIDF/MOF Supplying and erecting approved make recess / surface mirror optic fitting suitable for 2 x 36W compact fluo.lamp fixed in false ceiling/ on ceiling as per specification no. FG-IDF/MOF
Mtr.
151
13.72
165.00
Each
323
22.17
345.00
Each
420
22.17
442.00
Each
658
22.17
680.00
Each
436
16.89
453.00
Each
384
16.89
401.00
Each
1397
47.51
1445.00
Each
724
22.17
746.00
Each
1051
22.17
1073.00
Each
984
22.17
1006.00
Each
1552
22.17
1574.00
Each
999
22.17
1021.00
Each
619
22.17
641.00
Each
1100
22.17
1122.00
Each
1753
29.56
1783.00
2-2-29
2-2-30
2-2-31
2-2-32
2-2-33
2-2-34
2-2-35
2-2-36
2-2-37
2-2-38
Supplying and erecting approved make recess / surface soft light mirror optic square / rectangular fitting suitable for 2 x 36W compact fluo.lamp with PL Wings with Electronic Ballast having pf > 0.98 & THD <10 fixed in false ceiling / on ceiling as per specification no. IDF/MOF Supplying and erecting approved make recess / surface soft light square / rectangular PL fitting suitable for 2 x 36W compact fluo.lamp with Electronic Ballast having pf > 0.98 & THD <10 fixed in false ceiling / on ceiling as per specification no. FG-IDF/MOF Supplying and erecting approved make square double parabolic recess / surface mirror optic square / rectangular PL fitting suitable for 2 x 36W compact fluo.lamp with Electronic Ballast having pf > 0.98 & THD <10 fixed in false ceiling / on ceiling as per specification no. IDF/MOF Supplying and erecting approved make square parabolic recess / surface mirror optic square / rectangular PL fitting suitable for 3 x 36 watt compact fluo.lamp with Electronic Ballast having pf > 0.98 & THD <10 fixed in false ceiling / on ceiling as per specification no. FG-IDF/MOF Supplying and erecting approved make Crescent recess / surface soft light mirror optic square PL fitting suitable for 3 x 36W compact fluo.lamp with Electronic Ballast having pf > 0.98 & THD <10 fixed in false ceiling / on ceiling as per specification no. FG-IDF/MOF Supplying and erecting 1 x 9 to 18W PL with electronic ballast concealed type foot light having CRCA powder coated body and alluminium step type or mirror finish reflector covered with clear acrylic stainless steel mat finish frame ( 9x6 inch in size) as per specification no. FG-IDF/FL Supplying & erecting approved make 1 x T8 40/36W white stove enamelled / powder coated box type fluo.fitting with 40 Watts. polyester heavy duty copper wound ballast, fixed at ceiling or on wall as per specification no.FG-IDF/BFF Supplying & erecting approved make 1 x T8 40/36 watt white stove enamelled / powder coated box type fluo.fitting with 40 Watts. Electronic ballast pf > 0.98 & THD <10 , fixed at ceiling or on wall. As per specification no.FG-IDF/BFF Supplying & erecting approved make 1 x T8 40/36W white stove enamelled / powder coated box type fluo. fitting with 40 W Vaccum impregnated LOW WATT LOSS BALLAST fixed at ceiling or on wall as per specification no.FG-IDF/BFF Supplying & erecting 1x28W T-5 Energy Efficient Retrofit/ Stand alone Fluorescent Tube light Fitting (EETLF) box type complete with Electronic Ballast having pf > 0.98 & THD <10 and lamp holders duly wired ready to use for 230 Volts, 50 Hz. Single phase AC Supply to IS: 10322 as per quality requirements and erected on varnished wooden blocks with flexible wire twin core 24/0,2mm.and marking Sr. No. and date of erection.
Each
3219
29.56
3249.00
Each
2362
29.56
2392.00
Each
2580
29.56
2610.00
Each
3242
29.56
3272.00
Each
3300
29.56
3330.00
Each
1859
29.56
1889.00
Each
588
17.95
606.00
Each
695
17.95
713.00
Each
760
17.95
778.00
Each
1075
17.95
1093.00
2-2-39
Supplyng & erecting 1x 36W T-8 Energy Efficient Fluorescent tube light fitting EETLF slim type with clear acrylic cover and endcaps Minolta type with Electronic Ballast having pf > 0.98 & THD <10 and lamp holders duly wired ready to use for 230 Volts, 50 Hz. Single phase AC Supply to IS: 10322 as per quality requirements and erected on varnished wooden blocks with flexible wire twin core 24/0, 2mm. & and marking Sr. No. and date of erection. Supplying and erecting approved make white stove enamelled / powder coated CRCA sheet not less than 0.7 mm thick chalk board type fluo.fitting of 1 xT8 40/36W with 40 Watts VPIT ballast, fixed at ceiling or on wall as per specification No.FG-IDF/CBF Supplying and erecting approved make white stove enamelled / powder coated CRCA sheet not less than 0.7 mm thick chalk board type fluo.fitting of 1 xT8 40/36 W.with 40 Watts Electronic Ballast having pf > 0.98 & THD <10 , fixed at ceiling or on wall as per specification no. FGIDF/CBF Supplying and erecting approved make 2 x T8 40/36W.white stove enamelled / powder coated box type fluo.fitting with 2 x 40 W.VPIT copper ballasts, fixed at ceiling or on wall as per specification No. FGIDF/BFF Supplying and erecting approved make 2 x T8 40/36W.white stove enamelled / powder coated box type fluo.fitting with 2x 40W Electronic Ballast having pf > 0.98 & THD <10 , fixed at ceiling or on wall as per specification No. FG-IDF/BFF Supplying & erecting approved make 1 x T8 40/36W with white stove enamelled/ powder coated industrial type flou. fitting with one 40W Electronic Ballast having pf > 0.98 & THD <10 , fixed at ceiling or on wall as per specification No. FG-IDF/INF
Each
1998
17.95
2016.00
2-2-40
Each
1480
17.95
1498.00
2-2-41
Each
1596
17.95
1614.00
2-2-42
Each
1133
17.95
1151.00
2-2-43
Each
1329
17.95
1347.00
2-2-44
Each
1190
17.95
1208.00
2-2-45
2-2-46
2-2-47
2-2-48
2-2-49 2-2-50
2-2-51 (New)
Note :-
Supplying & erecting approved make 2 x T8 40/36W with white stove enamelled/ powder coated industrial type flou. fitting with two 40 W Electronic Ballast having pf > 0.98 & THD <10 , fixed at ceiling or on wall as per specification No. FG-IDF/INF Supplying and erecting approved make 1 xT8 40/36W fluo fitting recess /surface mounting mirror optic type with one 40W Electronic Ballast having pf > 0.98 & THD <10 , fixed in false ceiling or at ceiling or on wall as per specification No. FG-IDF/MOP Supplying and erecting approved make 2 xT8 40/36 Watt fluo fitting recess /surface mounting mirror optic type with two 40 W Electronic Ballast having pf > 0.98 & THD <10 , fixed in false ceiling or at ceiling or on wall as per specification No. FG-IDF/MOP Erection of Departmentally supplied fitting on PVC block connected with necessary leads for 440 Watts. fitting and 220 W. fitting and with marking the sr. no. & date of erection. Erection of Departmentally supplied surface/recess type decorative fitting with CFL on PVC block connected with necessary leads Erection of Departmentally supplied mirror optic type fitting on PVC block connected with necessary leads and with marking the Sr. No. & date of erection. Supplying and erecting approved make square / rectangular recess / surface mirror optic PL fitting with para louvers suitable for 1 x 36W compact fluo.lamp with electronic ballast pf > 0.98 & THD <10 fixed in false ceiling / on ceiling as per specification no. FG-IDF/MOF 1) Reduce Rs 10/- if, fitting is to be erected on provided wooden / Sunmica board for Item No 2-2-11 to 2-2-18 2) Use of fluo. Fitting with conventional choke shall be avoided. 3) All fittings are excluding tubes/lamps. 4) All 40W fitings are suitable for 40W / 36 W - conventional/slim T8 (High Phosphor 2450 lumens) & Energy Efficient 36 W T8(Tri-band Phosphor 3250 lumens). 5) The fitting having two or more CFL/ FTL should be provided with independent choke for each tube/ bulb
Each
1590
17.95
1608.00
Each
1538
29.56
1568.00
Each
2233
29.56
2263.00
Each
17
17.95
35.00
Each Each
17 21
22.17 29.56
39.00 51.00
Each
1228
29.56
1258.00
2-3-2
2-3-3
2-3-4
2-3-5
2-3-6
2-3-7
2-3-8
Supplying and erecting CFL Street light Suitable for one No. 9 to 18W CFL lamp with electronic ballast having pf > 0.98 & THD <10 on provided bracket as per specification no. FG-ODF/CSL Supplying and erecting CFL Street light Suitable for two Nos. 9 to 18W CFL lamp with electronic ballast having pf > 0.98 & THD <10 on provided bracket as per specification no. FG-ODF/CSL Supplying and erecting CFL Street light Suitable for one No. 36W CFL lamp with electronic ballast having pf > 0.98 & THD <10 provided bracket as per specification no. FG-ODF/CSL Supplying and erecting CFL Street light Suitable for two Nos. 36W CFL lamp with two individuals electronic ballast having pf > 0.98 & THD <10 on provided bracket as per specification no. FG-ODF/CSL Supplying and erecting CFL Street light Suitable for four Nos. 36W CFL lamp with four individuals electronic ballast having pf > 0.98 & THD <10 on provided bracket as per specification no. FG-ODF/CSL Supplying and erecting Energy efficient street light fitting Suitable for 2 x 14W T-5 lamp with PF > 0.98 & THD <10 The fitting canopy is made of deep drown Alluminium body provided with serrated acrylic diffuser and gasket as per specification no. FG-ODF/FLS2 Supplying and erecting Energy efficient T 5 Street light Suitable for 2 x 24W T 5 lamp with PF > 0.98.& THD <10 The fitting canopy is made of deep drownAlluminium body provided with serrated acrylic diffuser and gasket as per specification no. FG-ODF/FLS2 Supplying and erecting Energy efficient T 5 Street light Suitable for 4 x 24W T 5 lamp with PF > 0.98.& THD <10 The fitting canopy is made of deep drown Alluminium body provided with serrated acrylic diffuser and gasket as per specification no. FG-ODF/FLS2 Supplying and erecting 80 / 125W water tight M. V. lamp fitting on provided bracket as per specification no. FG-ODF/GSL Supplying and erecting 250W water tight M. V. lamp fitting on provided bracket as per specification no. FG-ODF/GSL Supplying and erecting 400W water tight M. V. lamp fitting on provided bracket as per specification no. FG-ODF/GSL Supplying & erecting street light 70W H.P. S.V. lamp fitting on provided bracket as per specification no. FG-ODF/GSL Supplying & erecting street light 150W H.P.S.V. lamp fitting on provided bracket as per specification no. FG-ODF/GSL Supplying & erecting street light 250W H.P.S.V. lamp fitting on provided bracket as per specification no. FG-ODF/GSL Supplying & erecting Flood light Luminaries suitable for 70W metal halide lamp on provided bracket as per specification no. FG-ODF/GFL
Each
788
51.73
840.00
Each
984
51.73
1036.00
Each
1112
51.73
1164.00
Each
1968
516.24
2484.00
Each
3793
51.73
3845.00
Each
2432
51.73
2484.00
Each
2200
51.73
2252.00
Each
5268
51.73
5320.00
2-3-16 2-3-17
2-3-27
Supplying & erecting Flood light Luminaries suitable for 150W metal halide lamp on provided bracket as per specification no. FG-ODF/GFL Supplying & erecting high purity sheet aluminum flood light fitting suitable for 250/400W, MV/SV lamp on provided bracket as per specification no. FG-ODF/GFL Supplying & erecting flood light luminaire suitable for 1 x 500 Watts Halogen lamp. on provided bracket as per specification no. FG-ODF/GFL Supplying & erecting flood light luminaire suitable for 1 x1000W Halogen lamp. on provided bracket as per specification no. FG-ODF/GFL Supplying & erecting street light metal halide lamp fitting 70W on provided bracket as per specification no. FG-ODF/GSL Supplying & erecting street light metal halide lamp fitting 150W on provided bracket as per specification no. FG-ODF/GSL Supplying & erecting street light metal halide lamp fitting 250W on provided bracket as per specification no. FG-ODF/GSL Supplying & erecting street light metal halide lamp fitting 400W on provided bracket as per specification no. FG-ODF/GSL Supplying & erecting flood light metal halide lamp fitting 2x250W on provided bracket as per specification no. FG-ODF/GFL Supplying & erecting flood light metal halide lamp fitting 250W on provided bracket as per specification no. FG-ODF/GFL Supplying & erecting integral post top lantern fixture similar to JUNO type for 70 Watts HPSV lamp consisting of brown painted LM 6 alloy cylindrical spigot,decorative acrylic bowl supported by spun aluminum top cover complete with accessories such as copper wound choke and condensor housed within the lantern with necessary wiring etc. Supplying & erecting integral post top lantern fixture similar to JUNO type for 3x70W HPSV lamp consisting of brown painted LM 6 alloy cylindrical spigot,decorative acrylic bowl supported by spun aluminum top cover complete with accessories such as copper wound choke and condensor housed within the lantern with necessary wiring. The three nos of Juno fittings are to be provided with centre pole mounting pipe assembly and with 3 nos J piple bracket. Supplying & erecting integral post top lantern fixture similar to JUNO type for 70W MH lamp consisting of brown painted LM 6 alloy cylindrical spigot,decorative acrylic bowl supported by spun aluminum top cover complete with accessories such as copper wound choke and condensor housed within the lantern with necessary wiring etc. Supplying & erecting integral post top lantern fixture similar to JUNO type for 3x70 Watts MH lamp consisting of brown painted LM 6 alloy cylindrical spigot,decorative acrylic bowl supported by spun aluminum top cover complete with accessories such as copper wound choke and condensor housed within the lantern with necessary wiring The three nos of Juno fittings are to be provided with centre pole mounting pipe assembly and with 3 nos J piple bracket. Supplying & erecting integral post top lantern fixture similar to JUNO type for 150W MH lamp consisting of brown painted LM 6 alloy cylindrical spigot,decorative acrylic bowl supported by spun aluminum top cover complete with accessories such as copper wound choke and condensor housed within the lantern with necessary wiring etc. Supplying & erecting integral post top lantern fixture similar to JUNO type for 3x150W MH lamp consisting of brown painted LM 6 alloy cylindrical spigot,decorative acrylic bowl supported by spun aluminum top cover complete with accessories such as copper wound choke and condensor housed within the lantern with necessary wiring The three nos of Juno fittings are to be provided with centre pole mounting pipe assembly and with 3 nos J piple bracket. Supplying & erecting gate/ garden light fitting with 300 mm dia. glass bowl on provided pipe as per specification no. FG-ODF/GLT Supplying & erecting gate light fitting with 200 mm dia. glass bowl suitable for one 9 / 11W CFL lamp on provided pipe as per specification no. FGODF/GLT Supplying & erecting garden light fitting with 300 mm. dia.clear acrylic bowl / mushroom / round shape with bollard suitable for one 9 / 11W CFL lamp on provided pipe as per specification no. FG-ODF/GLT Supplying & erecting gate light fitting with 300 mm. dia.Opal acrylic bowl / mushroom / round shape without bollard suitable for one 9 / 11W CFL lamp on provided pipe as per specification no. FG-ODF/GLT Erecting the departmentally supplied W.P. street light fitting and marking / painting the Sr. No. and date of erection by best quality enamel paint. Erecting Deptt. supplied H.PS.V/ H.P.M.V/ M.H. Fitting of 70-150W marking/ painting Sr. No. & date of erection by best quality enamel paint Erecting the Deptt. supplied H.PS.V./ H.PM.V./M.H fitting of 250 400W and marking/ painting Sr. No. & date of erection by best quality enamel paint Supplying and erecting Energy efficient street light fitting Suitable for 4 x 14W T-5 lamp with PF > 0.98 & THD <10 The fitting canopy is made of deep drown Alluminium body provided with serrated acrylic diffuser and gasket as per specification no. FG-ODF/FLS2
Each Each
3275 3696
185.8 124.57
3461.00 3821.00
Each
24278
520.46
24798.00
2-3-28
Each
4362
520.46
4882.00
2-3-29
Each
24278
520.46
24798.00
2-3-30
Each
7531
520.46
8051.00
2-3-31
Each
24816
520.46
25336.00
2-3-32 2-3-33
Each Each
918 349
83.4 83.4
1001.00 432.00
2-3-34
Each
1579
76.01
1655.00
2-3-35
Each
723
76.01
799.00
0 0 0 5310
Note :-
1) If (DPSD) energy saving device is used, increase rate by Rs 800/- for one lamp in each fitting. 2) All fittings are excluding tubes/lamps. 3) The fitting having two or more CFL/ FTL should be provided with independent choke for each tube/ bulb 4) All SV/MV/MH/CFL/T-5 street fittings shall be used with one piece enclosure with top opening
2-4-7
2-4-8
2-4-14
2-4-15 2-4-16
2-4-17
2-4-21
Supplying and erecting condensor 4 microfarad for fluo. Fitting, as per specification No FG-FG/AS7 Supplying and erecting condensor for M.V. lamp 125 W, 230 V as per specification No FG-FG/AS7 Supplying and erecting condensor for M.V. lamp 250 W, 230 V as per specification No: FG-FG/AS7 Supplying and erecting condensor for M.V. lamp 400 W, 230 V as per specification No: FG-FG/AS7 Supplying and erecting ignitor suitable for 230 V H.P.S.V. lamps 70 / 150/250/400W as per specification No: FG-FG/AS6 Supplying and erecting electronic ignitor suitable for Metal hallide Lamp 70 / 150 /250 /400 Watts (Integral/non-integral type luminaries) as per specification No: FG-FG/AS6 Supplying and erecting low watt loss vacuum impregnated copper choke (VPIT) suitable for CFL / FTL from 11-20 W as per specification No. FGFG/AS1 Supplying and erecting low watt loss vacuum impregnated copper choke (VPIT) suitable for CFL / FTL from 24-40 W as per specification No. FGFG/AS1 Supplying and erecting VPIT heavy duty copper wound ballast 230 V for 80 -150 W, HV/ M.V./ MH lamp as per specification No. FG-FG/AS5 Supplying and erecting VPIT compound heavy duty copper wound ballast for 230V 250 W HV/ M.V./ MH lamp as per specification No. FG-FG/AS5 Supplying and erecting VPIT heavy duty copper wound ballast for 230V 400 W HV/ M.V./ MH. lamp as per specification No.FG-FG/AS4 Supplying 18 / 20 /36 / 40 W tube starter 230 V as per specification No. FGFG/AS11 Supplying and erecting double suspension heavy duty lacquered iron chain with hooks for erecting fluo.tube light fitting with necessary 2 or 3 core copper flexible wire 24/.2 mm for connecting leads.(for measurements half of the actual length used) Supplying and erecting double suspension pipe rod of 16 gauge 20mm.dia H.G.conduit duly threaded and painted with two coats of enamel paint for erection of fluo tube light fitting with necessary check nuts and 2 or 3 core copper flexible wire of 24/.2 mm for connecting leads (for measurements half of the actual length both pipes used) Supplying and erecting ball suspension plate cast aluminum erected with spring on wooden block in position. Supplying and erecting electronic ballast pf > 0.98 & THD <10 of approved make having operating range100 to 300V with surge supression not less than 9 kV and with RF filter conforming to IS 13021 (Part I) suitable for T 8, 1x40/1x36W Fluo. tube fitting. Providing and erecting clamps for box type / industrial type fittings with provided suspension down rod of 20 mm dia. H.G.conduit,the clamp shall be made of 25 x 3 mm MS flat with cutting,bending,drilling erected properly with necessary nut bolt as per direction. The item shall be provided only at the time of installation of fitting on trusses / pipe / angle / channel. Supplying and erecting Bakelite call bell with 6 cm / buzzer with double coil suitable for 230V complete erected on PVC block. Supplying and erecting gong with double coil suitable for 230V. complete erected on polished wooden block. Supplying and erecting Ding Dong / electronic musical type call bell with heavy duty coil suitable to operate on 230V A.C. supply erected on polished double wooden block/sunmica block of suitable size. Supplying and erecting luminous / modular type call bell indicator with plastic body, heavy duty coil and indicator lamp working on 230V A.C. supply with resetting arrangement complete erected on double wooden/ sunmica board. Supplying and erecting Electronic Type cordless call bell erected on T.W. board having portable bell push working on 9 V. D.C. and bell on 250 V A.C. supply. (Effective range upto 45 meter) Reduce Rs. 10/- if accessories to be erected on provided wooden / sunmica board for item no.2.4.25 to 2.4.29
Each
162
17.95
180.00
Each
226
17.95
244.00
Mtr.
136
10.56
147.00
Each Each
17 269
5.28 20.06
22.00 289.00
Pair
52
10.56
63.00
41 50 82
Each
179
13.72
193.00
2-4-22
Each
453
8.45
461.00
Note :-
2-4-23
Supplying and fixing wiremesh(Jali) cover suitable for fitting / fan or for any purpose, complete with necessary materials. The Jali cover shall be made from good quality G.I. wire mesh size 25 mm x 25 mm and made up of 14 SWG G.I. wire with side / supporting MS strips of suitable size. The fitting having two or more CFL/ FTL should be provided with independent choke for each tube/ bulb Supplying and erecting Electronic ballast having pf > 0.98 & THD <10 or Transformer suitable for CFL / FTL from 11-28 W as per specification No. FG-FG/AS1 Supplying and erecting Electronic ballast pf > 0.98 & THD <10 or Transformer suitable for CFL / FTL from 30-40 W as per specification No. FG-FG/AS1
Sqm.
398
65.45
463.00
Each
214
20.06
234.00
Each
341
20.06
361.00
2-5-2
2-5-3
2-5-4
2-5-5
2-5-6
2-5-7
Supplying and erecting street light bracket made from 25 mm dia B class G.I. Pipe 0.6 m in length along with pole cap of 300 mm length and 80mm dia duly welded with provided leads as per specification No FG- BKT/ BPC Supplying and erecting street light bracket made from 40 mm. dia B class G.I. pipe,0.6 m. in length along with pole cap of 300 mm length and 80mm dia duly with provided leads as per specification No FG- BKT/ BPC Supplying and erecting street light Wall bracket made from 25 mm. dia B class G.I. pipe 1.2 m in total length complete as per specification no. FG-BKT/WB Supplying and erecting street light Wall bracket made from 40 mm. dia B class G.I. pipe 1.2 m in total length complete as per specification no. FG-BKT/WB Supplying and erecting street light bracket for single fitting made from 40 mm. dia B class G.I. pipe,1.0 m. in length along with pole cap of 300 mm length 100 mm dia duly welded as per specification no FG- BKT/ BPC Supplying and erecting street light bracket for double fitting made from 40 mm. dia B class G.I. pipe,1.0 m. in length along with pole cap of 300 mm length, 100 mm dia duly welded as per specification no FG- BKT/ BPC Supplying and erecting street light bracket for erection of single fitting on tubular welded pole with 40 mm. dia 1.0 m. long B grade G.I. pipe along with pole cap of 125 mm dia. 600 mm long duly welded as per specification no FG- BKT/ BPC Supplying and erecting street light bracket for erection of double fitting on tubular welded pole with 40 mm. dia 1.0 m. long on each side B grade G.I. pipe welded to pole cap of 125 mm dia. 600 mm long as per specification no FG- BKT/ BPC Supplying and erecting Street light bracket for erection of side entry fitting on pole with 40 mm. dia. 'B' grade G.I. pipe of required length complete as per specification no. FG- ODF/ SLB. Supplying and erecting Street light bracket for erection of side entry fitting on pole with 25 mm. dia. 'B' grade G.I. pipe of required length complete as per specification no. FG- ODF/ SLB.
Each
392
85.51
478.00
Each
428
85.51
514.00
Each
364
64.4
428.00
Each
492
64.4
556.00
Each
697
85.51
783.00
Each
1001
85.51
1087.00
Each
1163
115.07
1278.00
2-5-8
Each
1483
115.07
1598.00
2-5-9
Mtr.
430
57.01
487.00
2-5-10
Mtr.
325
57.01
382.00
2-6-6
Supplying and erecting Ceiling fan of 600 mm. sweep complete erected in position as per specifcation no. FG-FN/CF Supplying and erecting Ceiling fan of 900 mm. sweep complete erecte in position as per specifcation no. FG-FN/CF Supplying and erecting Ceiling fan of 1200 mm. sweep complete erected in position as per specifcation no. FG-FN/CF Supplying and erecting Ceiling fan of 1400 mm. sweep complete erected in position as per specifcation no. FG-FN/CF Providing and erecting bracket fan 400 mm. sweep A. C. 230 volts 50 cycles 1350 R.P.M. Oscillating type, plastic or metal blades chrome plated guard with regulator and moisture proof treatment to winding and with E class insulation and marking Sr. No. and date of erection. Providing and erecting air circulator 450 mm. sweep oscillating type, wall mounting 1440 RPM without speed regulator, overheat protection unit, totally enclosed, flame proof motor suitable for 230/250 Volts single phase, 50 cycles A.C. supply, with one metre of 3 core lead wire and with moisture proof treatment to winding and with E class insulation and marking Sr. No. and date of erection. Providing and erecting air circulator 600 mm. sweep oscillating type, wallmounting 1440 RPM without speed regulator, overheat protection unit, totally enclosed, flame proof motor suitable for 230/250 Volts single phase, 50 cycles A.C. supply, with one metre of 3 core lead wire and withmoisture proof treatment to winding and with E class insulation and marking Sr. No. and date of erection. Supplying Pedestal fan 400 mm. 230 Volts 50 cycles oscillating type complete with guard and regulator 3 mtrs. of flexible wire and hand shield type 3 pin plug top and marking Sr. No. and date of erection.
Each
5417
98.18
5515.00
2-6-7
Each
6967
193.19
7160.00
2-6-8
Each
2573
2573.00
2-6-9
Supplying pedestal type air circulator 450 mm. sweep oscillating type suitable to work on 230 Volts 50 cycles 1440 RPM with speed regulator,overhead protection unit, totally enclosed, flame proof motor with additional 3 core wire, 5 metre length and Hand Shield type 3 pin 5A. plug topcomplete with moisture proof treatment and E class insulation andmarking Sr. No. and date of erection. Supplying pedestal type air circulator 600 mm. sweep oscillating type suitable to work on 230 Volts 50 cycles 1440 RPM with speed regulator,overhead protection unit, totally enclosed, flame proof motor with additional 3 core wire, 5 metre length and Hand Shield type 3 pin 6A. plug top complete with moisture proof treatment and E class insulation and marking Sr. No. and date of erection.
Each
5729
5729.00
2-6-10
Each
7366
7366.00
2-6-11
2-6-12
2-6-13
Supplying Table fan of A.C. 230 V. 50 cycles 400 mm. oscillating type complete with Each 2 mtrs. of 3 core flexible wire and Hand shield type 3 pin plug top and marking Sr. No. and date of erection. Supplying and erecting cabin fan of A.C. 230 V. 50 cycles 250 mm. /300 Each mm. sweep complete with necessary brackets for fixing cabin fans, wire etc and marking Sr. No. and date of erection. Supplying and erecting cabin fan of A.C. 230 V. 50 cycles 375 mm. sweep complete Each with necessary brackets for fixing cabin fans, wire etc and marking Sr. No. and date of erection. For all type of fans except ceilling fan the metal canopy shall be provided. Supplying and erecting fresh air cum Exhaust fan of light duty 250 V A.C. 50 cycles 300mm. 1400 RPM metallic body, plastic blades, wire mesh, duly erected in an approved manner and marking Sr. No. and date of erection. Supplying and erecting fresh air cum Exhaust fan of light duty 250 V A.C. 50 cycles 225mm. 1400 RPM metallic body, plastic blades, wiremesh, duly erected in an approved manner and marking Sr. No. and date of erection. Supplying and erecting Exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400RPM with condensor complete erected in position with necessary materials. Fanmotor with moisture proof treatment and E class insulation and marking Sr. No. & date of erction. Supplying and erecting Exhaust fan heavy duty 230 V, A.C. 50 cycles 375 mm. 900 RPM complete erected in position as per specifcation no. FG- FN/EXF Supplying and erecting Exhaust fan heavy duty 230 V A.C. 50 cycles 375 mm. 1400 RPM complete erected in position as per specifcation no. FGFN/EXF Supplying and erecting Exhaust fan heavy duty 230 V A.C. 50 cycles 450 mm. 1400 RPM complete erected in position as per specifcation no. FG- FN/EXF Supplying and erecting Exhaust fan heavy duty 230 V A.C. 50 cycles 450 mm. 900 RPM complete erected in position as per specifcation no. FGFN/EXF Supplying and erecting Exhaust fan heavy duty 440 V A.C. 50 cycles 900 RPM 375 mm complete erected in position as per specifcation no. FG -FN/EXF Supplying and erecting Five Star Rated Energy Saving Ceiling Fan 440 V A.C. 50 cycles 1200 mm complete erected in position as per specifcatio no. FG-FN/CF Each
1860
1860.00
1659
25.34
1684.00
1763
24.28
1787.00
2-6-14
1542
25.34
1567.00
2-6-15
Each
1430
24.28
1454.00
2-6-16
Each
1404
49.62
1454.00
2-6-17
Each
3519
84.46
3603.00
2-6-18
Each
3573
78.12
3651.00
2-6-19
Each
4981
78.12
5059.00
2-6-20
Each
4690
78.12
4768.00
2-6-21
Each
4013
78.12
4091.00
2-6-22 (New)
Each
2274
33.78
2308.00
2-7-4 2-7-5
Supplying and erecting condenser 2.5 micro farad for ceiling fan Supplying & fixing Anchor type fastener Fan hook, with 2 Nos of 10 mm dia x 75 mm long with necessary materials for Ceiling Fan. Supplying and erecting fan clamp of 30 x 5 mm. M.S. flat of required length and 10 mm. M.S. bolt and nuts erected with necessary hook of 10 mm. M.S. round bar and painted. Supplying and erecting Fan hook of 10 mm. M.S. round bar grouted in RCC slab with making the site as original. Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to the R.C.C. bars upto 50 mm length each side and pierced through a 16 S.W.G. thick aluminium/M.S. Bowl 100 mm dia. or equivalentsquare size and having depth upto 75 mm complete erected with duly painted by one coat of red oxide paint and two coats of paint erected inposition and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level of the slab. Supplying and erecting B grade G.I.pipe/M.S. pipe down rod duly painted for fan complete erected with PVC two core flexible cable 24/0.2 mm copper PVC wire. For ceiling fans the extra down rod shall be provided only if the roof / slab height is more than 4.0 m Erection of departmentally supplied ceiling fan with necessary materials,and marking / painting the Sr. No. and date of erection by best quality enamel paint.
29 59 140
Each Each
56 105
23.23 20.06
79.00 125.00
2-7-6
Mtr.
135
7.39
142.00
Note :2-7-7
0 Each 11
3.17 31.67
3.00 43.00
2-7-8
2-7-14
2-7-15
2-7-16
2-7-17
2-7-18
2-7-19
2-7-20
2-7-21
2-7-22
Note:-
Erection of departmentally supplied Exhaust fan with necessary materials, and marking / painting the Sr. No. and date of erection by best quality enamel paint. Supplying and erecting, resistance type regulator for ceiling fan 600/ 900/ 1200/ 1400 mm. sweep, complete erected on provided T.W. block. Supplying and erecting electronic type 600 W. dimmer/speed controller complete erected on provided switch board. Supplying and erecting electronic type 300/450 W dimmer/speed controller complete erected on provided switch board. Supplying and erecting electronic type step regulator complete erected on provided switch board. Providing recess in brick wall suitable for erection of exhaust fan up to 450mm sweep complete with grouting of nut, bolts, plastering and colour washing to match the colour of the wall for the wall thickness of 150 mm Providing recess in brick wall suitable for erection of exhaust fan up to 450mm. sweep complete with grouting of nut, bolts, plastering and colour washing to match the colour of the wall for the wall thickness of 225 mm Providing recess in brick wall suitable for erection of exhaust fan up to 450mm. sweep complete with grouting of nut, bolts, plastering and colour washing to match the colour of the wall for the wall thickness of 375 mm. Providing recess in brick wall suitable for erection of exhaust fan up to 450mm sweep complete with grouting of nut, bolts, plastering and colour washing to match the colour of the wall for the stone wall. Supplying & erecting 22 guage G.I sheet metal CAWL sector shaped with 25 mm x 25mm x 3mm angle iron frame, metal mesh to avoid birds entry with necessary material, suitable for exhaust fan of 300 mm as per specification no FG-FAS/MSC Supplying & erecting 22 guage G.I sheet metal CAWL sector shaped with 25 mm x 25mm x 3mm angle iron frame, metal mesh to avoid birds entry with necessary material, suitable for exhaust fan of 400 mm as per specification no FG-FAS/MSC Supplying & erecting 22 guage G.I sheet metal CAWL sector shaped with 25 mm x 25mm x 3mm angle iron frame, metal mesh to avoid birds entry with necessary material, suitable for exhaust fan of 450 mm as per specification no FG-FAS/MSC Supplying & erecting 20 guage G.I sheet metal CAWL rectangular / round shaped with 25 mm x 25mm x 3mm angle iron frame, metal mesh to avoid birds entry with necessary material, suitable for exhaust fan of 300 mm as per specification no FG-FAS/MSC Supplying & erecting 20 guage G.I sheet metal CAWL rectangular / round shaped with 25 mm x 25mm x 3mm angle iron frame, metal mesh to avoid birds entry with necessary material, suitable for exhaust fan of 400 mm as per specification no FG-FAS/MSC Supplying & erecting 20 guage G.I sheet metal CAWL rectangular / round shaped with 25 mm x 25mm x 3mm angle iron frame, metal mesh to avoid birds entry with necessary material, suitable for exhaust fan of 450 mm as per specification no FG-FAS/MSC 1) Reduce overall rate by 20% for item no 2.7.16 to 2.7.21, if separate angle iron is provided. 2)Before erection , accessories such as hook,shackle,nuts,bolts, U clamps,quater pin,down rod & checknuts shall be checked thorougly for its quality.
Each
39
125.63
165.00
Each
94
141.46
235.00
Each
122
188.97
311.00
Each
133
282.93
416.00
Each
818
51.73
870.00
Each
935
60.17
995.00
Each
993
60.17
1053.00
Each
812
40.12
852.00
Each
1081
40.12
1121.00
Each
1110
40.12
1150.00
2.8 Dismantling
2-8-1 2-8-2 2-8-3 2-8-4
Note :-
Dismantling of existing fluorescent fittings of any type & size. Dismantling the existing W.T.fluoroscent fitting / S.V./ M.V/MH. lamp fitting from wall with brackets and making the site as original complete. Dismantling the existing W.T. fluorescent fitting/ S.V./ M.V/MH lamp fitting from pole with brackets complete. Dismantling the existing ceiling fan/exhaust fan/cabin fan/bracket fan complete with accessories, G.I. down rod, frame etc. and making the site clear. The rates for item no 2.8.1 to 2.8.4 are for dismantling and handing over to section office inclusive of transportation upto 25 km, between site and section office.
0 0 0 0
3-1-2
Supplying and erecting storage type Horizontal / vertical water heater 15 Liters capacity with high impact resistance Engineering plastic body on wall / loft as per specification No. AP-WH/STWH Supplying and erecting storage / pressure type Horizontal / vertical water heater 25 Liters of mild steel body, on wall / loft as per specification No. AP-WH/STWH
Each
9124
233.31
9357.00
Each
8269
233.31
8502.00
3-1-3
3-1-4
3-1-5
3-1-6
3-1-7 3-1-8
3-1-13
3-1-14
Supplying and erecting storage type Horizontal / vertical water heater 25 Liters capacity with high impact resistance Engineering plastic body on wall / loft as per specification no. AP-WH/STWH Supplying and erecting storage/ pressure type vertical / horizontal water heater 35 Liters of mild steel body on wall / loft as per specification No. AP-WH/STWH Supplying and erecting storage type Horizontal / vertical water heater 35 Liters capacity with high impact resistance Engineering plastic body on wall / loft as per specification no. AP-WH/STWH Supplying and erecting storage/ pressure type vertical / horizontal water heater 50 Liters capacity of mild steel body on wall / loft as per specification No. AP-WH/STWH Supplying and erecting storage type Horizontal / vertical water heater 50 Liters capacity with high impact resistance Engineering plastic body on wall / loft as per specification no. AP-WH/STWH Supplying and erecting ISI mark midget type 3.0 Ltr instant type water heater of ABS plastic body 3 kW compling IS3412 of 1994 heating element 230/250 Volts 50 Cycle A.C. supply with inlet and outlet, thermostatic control and thermal cutoff with 3 core PVC flexible wire leads duly tested and marking Sr. No. and date of erection. Supplying and erecting Chromium plated heavy duty brass stop cock for inlet pipe of water heater (15 mm. dia). Supplying & erecting 15 mm brass non return valve for inlet pipe of storage water heater. Supplying & erecting dead weight pressure releasing valve for storage water heater with necessary materials. Supplying & erecting vacuum relief valve for storage water heater with necessary materials. Providing fibber reinforced PVC flexible pipe upto 1m length with brass locking nuts and washers and clips at both ends suitable for hot water complete erected in an approved manner. Erecting departmentally supplied water heater of 25 ltr capacity with wall fasteners, inlet & outlet pipes, NRV, etc. and marking Sr No. and date of erection. Erecting departmentally supplied water heater of 35/ 50 ltr capacity with wall fasteners, inlet & outlet pipes, NRV, etc. and marking Sr No. and date of erection. Supplying and erecting ISI mark / M.C.of A.A. heating element 2 / 3 kW suitable for water heater/ midget of any make any capacity. Supplying and erecting ISI mark / M.C.of A.A.thermostat suitable for water heater / midget of any make, any capacity.
Each
10103
233.31
10336.00
Each
10979
266.04
11245.00
Each
10951
266.04
11217.00
Each
13058
266.04
13324.00
Each
11882
266.04
12148.00
Each
3800
35.89
3836.00
19 19 19 19 16.89
Each
87
149.91
237.00
Each
100
179.47
279.00
3-1-15
3-1-16 3-1-17
Each Each
342 189
35.89 29.56
378.00 219.00
3-2-2
3-2-3
3-2-4
3-2-5
3-2-6
3-2-7
3-2-8
3-2-9
Supplying and erecting window model mounted type room Air conditioner 2 star 230/250V 50 cycles single phase A.C.supply 1 TR capacity complete at position as per specification No. AP-AC/WAC Supplying and erecting window model mounted type room Air conditioner 3 star 230/250 V 50 cycles single phase A.C.supply 1.5 TR capacity complete at position as per specification No. AP-AC/WAC Supplying and erecting window model mounted type room AirConditioner 2 star 230/250 V 50 cycles single phase A.C.supply 2 TR capacity complete at position as per specification No. AP-AC/WAC Providing modifications to the existing window for erection of window room air conditioner in position with use of teakwood, grill, aluminum channel, glass as per requirement and filling the gaps to maintain air tightness. Supplying and erecting split type room Airconditioning unit 3 TR capacity 250V, 50 cycles, A.C. supply having 2 Nos. of air handling units hi-wall mounting type complete at position as per specification No. APAC/SAC Supplying and erecting split type room Airconditioning unit 2 TR star capacity 250V, 50 cycles, A.C. supply having 2 Nos. of air handling units hi-wall mounting type complete at position as per specification no. AP-AC/SAC Supplying and erecting split type room Airconditioning unit 2 TR 3 star capacity 250V, 50 cycles, A.C. supply having 1 No of air handling unit hi-wall mounting type complete at position as per specification no. AP AC/SAC Supplying and erecting split type room Airconditioning unit 1.5 TR 5 star capacity 250V, 50 cycles, A.C. supply having 1 No of air handling unit hiwall / floor mounting type complete at position as per specification no. AP-AC/SAC Supplying and erecting split type room Airconditioning unit 1 TR star capacity 250V, 50 cycles, A.C. supply having 1 No of air handling unit hi-wall / floor mounting type complete at position as per specification no. AP-AC/SAC
Each
233334
1560.32
234894.00
Each
30399
1767.24
32166.00
Each
31777
1767.24
33544.00
Each
504
307.21
811.00
Each
59808
6738.53
66547.00
Each
47217
4641.91
51859.00
Each
40272
4583.85
44856.00
Each
33463
3369.79
36833.00
Each
28357
3120.65
31478.00
3-2-10
3-2-11
3-2-12
3-2-13
3-2-14 3-2-15
Notes:3-2-20
3-2-21
3-2-22
Notes:-
Providing and pesting superior quality Sun control film on glass to acieve better cooling effect having 1.5 / 2 mil thickness, ultra violet transmittance less than 2% and solar heat rejection 78% in approved manner. Supplying and erecting split type room Airconditioning unit 2.5 TR capacity 440V, 50 cycles, A.C. supply having 1 No of air handling unit (Mega spilt) Hi-wall mounting type complete at position as per specification No. AP-AC/SAC Supplying and erecting split type room Airconditioning unit 3TR capacity 440 V, 50 cycles, A.C. supply having 1 No of air handling unit (Mega spilt) mounting type complete at position as per specification No. AP-AC/SAC Supplying and erecting split type room Airconditioning unit 3 TR capacity 250V, 50 cycles, A.C. supply having 2 No of air handling unit (Multi spilt) hi-wall mounting type complete at position as per specification No. AP-AC/SAC Supplying & erecting copper pipe suitable for refrigeration system having 22 guage thickness and inner dia / size 12 mm complete. Supplying & erecting copper pipe suitable for refrigeration system having 22 guage thickness and inner dia / size 16 mm complete. For item no 3-2-14 to 3-2-15, rates for nitrite rubber insulation with necessary material on refrigerant piping, increase overall rate by 100% Supplying & erecting copper pipe suitable for refrigeration system having 22 gauge thickness and inner dia / size 22 mm complete. Supplying & erecting copper pipe suitable for refrigeration system having 22 guage thickness and inner dia / size 32 mm complete. Supplying & erecting copper pipe suitable for refrigeration system having 22 guage thickness and inner dia / size 35 mm complete. Supplying & erecting copper pipe suitable for refrigeration system having 22 guage thickness and inner dia / size 42 mm Complete. For item no 3-2-16 to 3-2-19, rates for nitrile rubber insulation woth necessary material on refrigent piping, increase overall rate by 50% Supplying and laying rigid PVC conduit 25 mm dia to drain water with PVC accessories on wall/ceiling as per specification No: WG-MA/CON, para no. 1.1.1 Supplying and laying rigid PVC conduit 32 mm dia to drain water with PVC accessories on wall/ceiling as per specification No: WG-MA/CON, para no. 1.1.1 Supplying and laying rigid PVC conduit 50 mm dia to drain water with PVC accessories on wall/ceiling as per specification No: WG-MA/CON, para no. 1.1.1 1) In future if AC units having star rating more than prescribed in the above items are if available in the market, same shall be preferbly implemented. 2) As per BEE guidelines Appliances shall be used of star rating 3) The above rates for split AC are inclusive of refrigerant piping upto 6 meter length
Sqm.
579
43.28
622.00
Each
61609
6738.53
68348.00
Each
71338
6738.53
78077.00
Each
66149
6738.53
72888.00
Mtr. Mtr.
180 241
15.84 15.84
196.00 257.00
Mtr.
60
8.45
68.00
Mtr.
97
8.45
105.00
Mtr.
134
13.72
148.00
3.3 Water coolers & Refrigerators (WC) Supplying refrigerator domestic type approved make 165 to 185 liters storage capacity, suitable for operation on 230/250 Volts 50 cycles 3-3-1 complete with automatic temperature control conforming to IS specifications No. 1476/79 with one year guarantee for sealed unit in refrigeration system and marking Sr. No. and date of erection. Supplying refrigerator domestic type approved make 285 to 310 liters storage capacity, suitable for operation on 230/250 V 50 cycles complete 3-3-2 with automatic temperature control conforming to IS specifications No. 1476/79 with one year guarantee for sealed unit in refrigeration system and marking Sr. No. and date of erection. Supplying, erecting, testing and commissioning self contained water cooler 230/250V 50 cycles nominal cooling capacity of 40 liters per hour 3-3-3 and storage capacity 80 liters. As per specification No. AP-WCR/WC Supplying, erecting, testing and commissioning self contained water cooler 230/250 V 50 cycles nominal cooling capacity of 60 liters per 3-3-4 hour and storage capacity 120 liters as per specification no. APWCR/WC Supplying, erecting, testing and commissioning self contained water cooler 230/250 Volts 50 cycles nominal cooling capacity of 150 liters 3-3-5 per hour and storage capacity 150 liters as per specification No. APWCR/WC 3-3-6 new Supplying and erecting, testing and commissioning Solar cum Natural water cooler suitable for hot and dry weather nominal coolling capaicty of 20 litres along with solar panel, fan for cooling, copper storage tank and copper coils with water spraying arrangement as per specifications no. AP-WCR/solar WC
Each
11483
11483.00
Each
21004
21004.00
Each
40714
388.5
41103.00
Each
54285
388.5
54674.00
Each
64907
388.5
65296.00
Each
63900
1103
65003.00
3-3-7 new
Supplying and erecting, testing and commissioning Solar cum Natural water cooler Each suitable for hot and dry weather nominal coolling capaicty of 50 litres along with solar panel, fan for cooling, copper storage tank and copper coils with water spraying arrangement as per specifications no. AP-WCR/solar WC Appliances such as refrigerator,Water Coolers should be used of star rating 3 and above as per B.E.E. 3.4 Air Coolers (ACR) Supplying evaporative air cooler (desert cooler) 230/250 Volts, 50 cycles, normal cooling capacity of 50 cu.m per minute complete as per specification No. AP-WCR/DAC Supplying evaporative air cooler (desert cooler) 230/250 Volts, 50 cycles,normal cooling capacity of 65 cu.mtr. per minute complete as per specification No. AP-WCR/DAC Supplying evaporative air cooler (desert cooler) 230/250 Volts, 50 cycles, normal cooling capacity of 85 cu.m per minute as per specification No. APWCR/DAC
77600
1103
78703.00
Note :-
Each
5106
5106.00
3-4-1
Each
6354
6354.00
3-4-2
Each
7716
7716.00
3-4-3
3-5-2
3-5-3
Supplying and erecting ultra violet water purifier with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water 5 Ltr/min with activated carbon filter and softener operating on 230 V single phase A.C. supply. Supplying and erecting ultra violet water purifier with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water 1 Ltr/min with activated carbon filter and softener operating on 230 V single phase A.C. supply. Supplying and erecting ultra violet water purifier with softener for safe drinking water consisting of UV germicidal tube of 8 W capacity choke made of copper wire and two indicator lamps with output of purified water 3 Ltr/min with activated carbon filter and softener operating on 230 V single phase A.C. supply. 3.6(A) Inverter (INV) Supplying, installing, testing & commissioning of 600 VA Digital pure sine wave inverter based on IGBT technology single phase 230V,50 Hz complete with 1 hr tubular battery backup as per specification no. APINV Supplying, installing, testing & commissioning of 800 VA Digital pure sine wave inverter based on IGBT technology single phase 230V,50 Hz complete with 1 hr tubular battery backup as per specification no. AP-INV Supplying, installing, testing & commissioning of 1400 VA Digital pure sine wave inverter based on IGBT technology single phase 230V, 50 Hz complete with 1 hr tubular battery backup as per specification no. APINV Supplying, installing, testing & commissioning of 2500 VA Digital pure sine wave inverter based on IGBT technology single phase 230V,50 Hz complete with 1 hr tubular battery backup as per specification no. APINV
Each
8624
104.51
8729.00
Each
8386
104.51
8491.00
Each
7538
104.5143
7642.51
Each
7623
892.07
8515.00
3-6-1
Each
9845
892.07
10737.00
3-6-2
Each
12749
1248.89
13998.00
3-6-3
Each
19250
2079.73
21330.00
3-6-4
Supplying, installing, testing & commissioning of Digital pure sine wave inverter for lift (3ph to 3 ph) having capacity 4 kVA with features a) Backup surge current delievery greater than 350% b) balanced type with micro controller based high frequency IGBT technology,with higher protection facility, ultra isolation with inbuilt forced aircooling and high responce in less time complete as per specification no. AP- LIFT-INV ( Without Battery) Supplying, installing, testing & commissioning of pure sine wave inverter for lift (3ph to 3 ph) having capacity 5 kVA with features a) Backup surge current delievery greater than 350% b) balanced type with micro controller based high frequency IGBT technology,with higher protection facility, ultra isolation with inbuilt forced aircooling and high responce in less time complete as per specification no. AP- LIFT-INV ( Without Battery) Supplying, installing, testing & commissioning of pure sine wave inverter for lift (3ph to 3 ph) having capacity 6 kVA with features a) Backup surge current delievery greater than 350% b) balanced type with micro controller based high frequency IGBT technology,with higher protection facility, ultra isolation with inbuilt forced aircooling and high responce in less time complete as per specification no. AP- LIFT-INV ( Without Battery)
Each
65793
2207.47
68000.00
Each
71303
2207.47
73510.00
3-6-6
Each
75841
2207.47
78048.00
3-6-7
3-6-8
Supplying, installing, testing & commissioning of pure sine wave inverter for lift (3ph to 3 ph) having capacity 7.5 / 8 kVA with features a) Backup surge current delievery greater than 350% b) balanced type with micro controller based high frequency IGBT technology,with higher protection facility, ultra isolation with inbuilt forced aircooling and high responce in less time complete as per specification no. AP- LIFT-INV ( Without Battery) Supplying, installing, testing & commissioning of pure sine wave inverter for lift (3ph to 3 ph) having capacity10 kVA with features a) Backup surge current delievery greater than 350% b) balanced type with micro controller based high frequency IGBT technology,with higher protection facility, ultra isolation with inbuilt forced aircooling and high responce in less time complete as per specification no. AP- LIFT-INV ( Without Battery) Supplying, installing, testing & commissioning of pure sine wave inverter for lift (3ph to 3 ph) having capacity 12/12.5 kVAwith features a) Backup surge current delievery greater than 350% b) balanced type with micro controller based high frequency IGBT technology,with higher protection facility, ultra isolation with inbuilt forced aircooling and high responce in less time complete as per specification no. AP- LIFT-INV ( Without Battery) Supplying, installing, testing & commissioning of pure sine wave inverter for lift (3ph to 3 ph) having capacity 15 kVA with features a) Backup surge current delievery greater than 350% b) balanced type with micro controller based high frequency IGBT technology,with higher protection facility, ultra isolation with inbuilt forced aircooling and high responce in less time complete as per specification no. AP- LIFT-INV ( Without Battery) Supplying, installing, testing & commissioning of pure sine wave inverter for lift (3ph to 3 ph) having capacity 18kVA with features a) Backup surge current delievery greater than 350% b) balanced type with micro controller based high frequency IGBT technology,with higher protection facility, ultra isolation with inbuilt forced aircooling and high responce in less time complete as per specification no. AP- LIFT-INV ( Without Battery) Supplying, installing, testing & commissioning of pure sine wave inverter for lift (3ph to 3 ph) having capacity 20kVA with features a) Backup surge current delievery greater than 350% b) balanced type with micro controller based high frequency IGBT technology,with higher protection facility, ultra isolation with inbuilt forced aircooling and high responce in less time complete as per specification no. AP- LIFT-INV ( Without Battery) Supplying, installing, testing & commissioning of pure sine wave inverter for lift (3ph to 3 ph) having capacity 25kVA with features a) Backup surge current delievery greater than 350% b) balanced type with micro controller based high frequency IGBT technology,with higher protection facility, ultra isolation with inbuilt forced aircooling and high responce in less time complete as per specification no. AP- LIFT-INV ( Without Battery) Supplying, installing, testing & commissioning of pure sine wave inverter for lift (3ph to 3 ph) having capacity 30kVAwith features a) Backup surge current delievery greater than 350% b) balanced type with micro controller based high frequency IGBT technology,with higher protection facility, ultra isolation with inbuilt forced aircooling and high responce in less time complete as per specification no. AP- LIFT-INV ( Without Battery) Supplying, installing, testing & commissioning of pure sine wave inverter for lift (3ph to 3 ph) having capacity 35kVA with features a) Backup surge current delievery greater than 350% b) balanced type with micro controller based high frequency IGBT technology,with higher protection facility, ultra isolation with inbuilt forced aircooling and high responce in less time complete as per specification no. AP- LIFT-INV ( Without Battery) 3.7 On line UPS (UPS) Supplying & erecting On line UPS pure sine wave of 1 kVA capacity complete with standard features,along with necessary tubular batteries for onr hour battery backup, as per specification No. AP-UPS Supplying & erecting On line UPS pure sine wave of 2 kVA capacity complete with standard features,along with necessary tubular batteries for onr hour battery backup, as per specification No. AP-UPS Supplying & erecting On line UPS pure sine wave of 3 kVA capacity complete with standard features,along with necessary tubular batteries for onr hour battery backup, as per specification No. AP-UPS Supplying & erecting On line UPS pure sine wave of 5 kVA capacity complete with standard features,along with necessary tubular batteries for onr hour battery backup, as per specification No. AP-UPS Supplying & erecting On line UPS pure sine wave of 6 kVA capacity complete with standard features,along with necessary tubular batteries for onr hour battery backup, as per specification No. AP-UPS Supplying & erecting On line UPS pure sine wave of 8 kVA capacity complete with standard features,along with necessary tubular batteries for onr hour battery backup, as per specification No. AP-UPS Supplying & erecting On line UPS pure sine wave of 10 kVA capacity complete with standard features,along with necessary tubular batteries for onr hour battery backup, as per specification No. AP-UPS
Each
90425
2207.47
92632.00
Each
104362
2207.47
106569.00
3-6-9
Each
117650
2207.47
119857.00
3-6-10
Each
145523
2697.31
148220.00
3-6-11
Each
154922
2697.31
157619.00
3-6-12
Each
165294
2697.31
167991.00
3-6-13
Each
186685
3210.38
189895.00
3-6-14
Each
234004
3210.38
237214.00
3-6-15
Each
262525
3210.38
265735.00
3-6-16
Each
22394
22394.00
3-7-1
Each
32641
32641.00
3-7-2
Each
41325
41325.00
3-7-3
Each
92052
92052.00
3-7-4
Each
132868
132868
3-7-5
Each
176462
176462
3-7-6
Each
250750
250750
3-7-7
Supplying and erecting 12 V/80AH TUBULAR Battery with battery terminal wire, duly charged complete with 30 months warranty complete Supplying and erecting 12 V/100AH TUBULAR Battery with battery terminal wire, duly charged complete with 30 months warranty complete Supplying and erecting 12 V/120AH TUBULAR Battery with battery terminal wire, duly charged complete with 30 months warranty complete Supplying and erecting 12 V/150AH TUBULAR Battery with battery terminal wire, duly charged complete with 30 months warranty complete Supplying and erecting 12 V/180AH TUBULAR Battery with battery terminal wire, duly charged complete with 30 months warranty complete Supplying and erecting 12 V/210AH TUBULAR Battery with battery terminal wire, duly charged complete with 30 months warranty complete
3-9-1
Each
2605
2605.00
3-9-2
Each
3462
3462.00
3-9-3
Each
6368
6368.00
3-9-4
Each
7179
7179.00
3-9-5
Each
13026
13026.00
3-9-6
Each
7816
7816.00
3-9-7
3.10 Dismantling
3-10-1 3-10-2 3-10-3
Note:-
Dismantling the existing electric Geyser or storage type water heater of any size along with plumbing connections and making the site clear. Dismantling the existing window type air conditioner of any type and capacity safely without any damages and making the site clear. Dismantling the existing split type air conditioner of any type and capacity safely without any damages and making the site clear. The rates for item no 3.10.1 to 3.10.3 are for dismantling and handing over to section office inclusive of transportation upto 25 km, between site and section office.
13 0 0
Chapter 4 : ENERGY SAVING DEVICES (ESD) 4.1 Solar Hot Water System (SHWS)
4-1-1
4-1-2
4-1-3
Supplying & Installing, Testing & Commissioning of Solar water heating system without heat exchanger type of 125 LPD capacity as per specification No. ESD-SHWS Supplying & Installing, Testing & Commissioning of Solar water heating system without heat exchanger type of 250 LPD capacity as per specification No. ESD-SHWS Supplying & Installing, Testing & Commissioning of Solar water heating system without heat exchanger type of 500 LPD capacity as per specification No. ESD-SHWS
Each
29529
1266.84
30796.00
Each
48435
1900.26
50335.00
Each
98820
3167.1
101987.00
4-1-4
4-1-5 4-1-6
Note :-
Supplying & Installing, Testing & Commissioning of Solar water heating system without heat exchanger type of 1000 LPD capacity as per specification No. ESD-SHWS Deleted Deleted 1)If the Solar water heating system is to be provided with heat exchanger increase overall rates by 15% 2)For all Hostel Bldg, Rest Houses, Circuit Houses, Dormitories and upto 2 Storey Residential quarters, Solar water heating System shall be proposed for new installation and for replacement / renovation instead of Electrical water Heater. 3) For providing SWHS system with glass tube collector deduct overall rate by 20 %
Each
181852
6334.2
188186.00
4-2-2
4-2-3
4-2-4
4-2-5
4-2-6
4-2-7
4-2-8
4-2-9
4-2-10
4-2-11
4-2-12
4-2-13
4-2-14
Supplying and erecting G.I pipe 15 mm dia B class with resin bonded flap rock wool/glass wool insulation, with necessary material as per specification No. (ESD-HWP/TGP) Supplying and erecting G.I pipe 20 mm dia B class with resin bonded flap rock wool/glass wool insulation, with necessary material as per specification No. (ESD-HWP/TGP) Supplying and erecting G.I pipe 25 mm dia B class with resin bonded flap rock wool/glass wool insulation, with necessary material as per specification No. (ESD-HWP/TGP) Supplying and erecting G.I pipe 32 mm dia B class with resin bonded flap rock wool/glass wool insulation, with necessary material as per specification No. (ESD-HWP/TGP) Supplying and erecting G.I pipe 40 mm dia B class with resin bonded flap rock wool/glass wool insulation, with necessary material as per specification No. (ESD-HWP/TGP) Supplying and erecting G.I pipe 50 mm dia B class with resin bonded flap rock wool/glass wool insulation, with necessary material as per specification no. (ESD-HWP/TGP) Supplying and erecting 12 mm polyethylene composite pipe duly joined by compression/crimp fitted accessories, with internal as well as external end sealing arrangement as per specification No. (ESD-HWP/PCP) Supplying and erecting 16 mm polyethylene composite pipe duly joined by compression/crimp fitted accessories, with internal as well as external end sealing arrangement as per specification No. (ESD-HWP/PCP) Supplying and erecting 20 mm polyethylene composite pipe duly joined by compression/crimp fitted accessories, with internal as well as external end sealing arrangement as per specification No. (ESD-HWP/PCP) Supplying and erecting 25 mm polyethylene composite pipe duly joined by compression/crimp fitted accessories, with internal as well as external end sealing arrangement as per specification No. (ESD-HWP/PCP) Supplying and erecting 32 mm polyethylene composite pipe duly joined by compression/crimp fitted accessories, with internal as well as external end sealing arrangement as per specification no. (ESD-HWP/PCP) Supplying and erecting 40 mm polyethylene composite pipe duly joined by compression/crimp fitted accessories, with internal as well as external end sealing arrangement as per specification No. (ESD-HWP/PCP) Supplying and erecting Elastomeric Nitrile rubber / foam tube type sleeves for over coating and insulating on provided copper pipes having 9 mm thickness and inner diameter / sizes 6 mm as per specification no ESD-ENR Supplying and erecting Elastomeric Nitrile rubber / foam tube type sleeves for over coating and insulating on provided copper pipes having 9 mm thickness and inner diameter / sizes 9 mm as per specification no ESD-ENR Supplying and erecting Elastomeric Nitrile rubber / foam tube type sleeves for over coating and insulating on provided copper pipes having 9 mm thickness and inner diameter / sizes 12 mm as per specification no ESD-ENR Supplying and erecting Elastomeric Nitrile rubber / foam tube type sleeves for over coating and insulating on provided copper pipes having 9 mm thickness and inner diameter / sizes 16 mm as per specification no ESD-ENR Supplying and erecting Elastomeric Nitrile rubber / foam tube type sleeves for over coating and insulating on provided copper pipes having 9 mm thickness and inner diameter / sizes 19 mm as per specification no ESD-ENR Supplying and erecting Elastomeric Nitrile rubber / foam tube type sleeves for over coating and insulating on provided copper pipes having 9 mm thickness and inner diameter / sizes 22 mm as per specification no ESD-ENR
Mtr.
347
49.62
397.00
Mtr.
469
49.62
519.00
Mtr.
524
100.29
624.00
Mtr.
674
100.29
774.00
Mtr.
809
100.29
909.00
Mtr.
1007
100.29
1107.00
Mtr.
235
49.62
285.00
Mtr.
277
49.62
327.00
Mtr.
277
49.62
327.00
Mtr.
405
49.62
455.00
Mtr.
586
49.62
636.00
Mtr.
749
49.62
799.00
Mtr.
53
2.11
55.00
Mtr.
59
2.11
61.00
4-2-15
Mtr.
75
2.11
77.00
4-2-16
Mtr.
80
5.28
85.00
4-2-17
Mtr.
96
5.28
101.00
4-2-18
Mtr.
107
6.33
113.00
4-2-19
4-2-20
4-2-21
Note :-
Supplying and erecting Elastomeric Nitrile rubber / foam tube type sleeves for over coating and insulating on provided copper pipes having 9 mm thickness and inner diameter / sizes 28 mm as per specification no ESD-ENR Supplying and erecting Elastomeric Nitrile rubber / foam tube type sleeves for over coating and insulating on provided copper pipes having 9 mm thickness and inner diameter / sizes 32 mm as per specification no ESD-ENR Supplying and erecting Elastomeric Nitrile rubber / foam tube type sleeves for over coating and insulating on provided copper pipes having 9 mm thickness and inner diameter / sizes 42 mm as per specification no ESD-ENR 1) For polyethylene composite pipe additional insulation may be proposed where there is drastic fall in temperature due to atmospheric condition
Mtr.
124
7.39
131.00
Mtr.
136
7.39
143.00
Mtr.
189
8.45
197.00
4-3-2
4-3-3
4-3-4
4-3-5
4-3-6
4-3-7
4-3-8
4-3-9
Note :-
Supplying & erecting duly certified by MNES Solar Street Light Fitting with 9/11 W CFL, with pole, c c foundtion, 12 V, 75 AH battery Complete as per specification no. ESD-SOL/STL Supplying & erecting Solar home Light system with structure as per MNES specification with 1 no of CFL lamp of 9 W / 11W, 12 V, 20Ah battery as per specification No. ESD-SOL/SHL Supplying & erecting Solar home Light system with structure as per MNES specification with 2 nos of CFL lamp of 9 W / 11W, 12 V, 40Ah battery as per specification No. ESD-SOL/SHL Supplying & erecting Solar home Light system with structure as per MNES specification with 1 no of CFL lamp of 9 W / 11W, 1 No D C fan rating < 20 W, 12 V, 40 Ah battery as per specification no. ESDSOL/SHL Supplying and erecting Solar panel comprising high efficiency monocrystane / multi cryline Photo Voltaic Cell 20 W Per Single module suitable for 4-5 hrs backup with necessary clamps and module frame as per specification no. ESD-SOL/CELL Supplying and erecting approved make battery with capacity of 12 V 25 AH with duty cycle 8-10 hrs suitable to charge on PV cell with necessary wiring connections erected in powder coated protection box with stand and nut bolts as per specification no. ESD-SOL/BAT Supplying and erecting approved make battery with capacity of 12 V 40 AH with duty cycle 10-12 hrssuitable to charge on PV cell with necessary wiring connections erected in powder coated protection box with stand and nut bolts as per specification no. ESD-SOL/BAT Supplying and erecting approved make battery with capacity of 12 V 75 AH with duty cycle 10-12 hrs suitable to charge on PV cell with necessary wiring connections erected in powder coated protection box with stand and nut bolts as per specification no. ESD-SOL/BAT Supplying and erecting Solar Power Generator up to 100 WP 230V, 50 Hz for connecting between battery and light fixture as per specification no. ESDSOL/GEN While framing the estimate of solar street light with solar PV panel , battery, converter, the above items should be taken along with provided street light pole bracket and necessary street light fitting 4.4 Energy Devices (Harmonic Filter, APFC Panel) (ESD) Carrying out Power quality analysis of the exisiting load at point of supply/or as directed, with use of necessary equipment's and submission of detail analysis report with remedial measures, as per specification no (ESDED/PQA) After carrying out detailed Power Quality analysis of existing load and on the basis of analysis Active Harmonic filter is to be provided, in addition to necessary capacitors / APFC with capacitors. Deleted Supplying, erecting, testing, and commissioning of Digital Active 60 A Harmonic filter cum Power conditioner, with Digital Closed Loop Active Filter with Source Current Sensing, 32 bit, Digital Signal processing, High speed IGBTs in power circuit with necessary CTs to be mounted on existing cable/bus and shunted to supply as per specification No. ESD-ED/DAHF Supplying and erecting 30 kVAR , 440 V Three phase, 50 cycles, THYRISTER SWITCHED MICRO APFC PASSIVE FILTER PANEL, consisting of (10kx3) steps of APP type capacitor units confirming to IS13585 ( Part I ) 1994 with harmonic filter reactors, suitable for 50 kW load as per specification no ESD-APFC
Each
32123
2210.64
34334.00
Each
10338
10338.00
Each
17636
17636.00
Each
17818
17818.00
Each
9638
157.3
9795.00
Each
8128
157.3
8285.00
Each
8451
157.3
8608.00
Each
13117
157.3
13274.00
Each
3075
40.12
3115.00
4-4-1
per feeder
4828.77
4829.00
4-4-2 4-4-3
Each
550207
550207.00
4-4-4
Each
149226
25072.88
174299.00
4-4-5
Supplying and erecting 40 kVAR , 440 V Three phase, 50 cycles, THYRISTER SWITCHED MICRO APFC PASSIVE FILTER PANEL, consisting of (15k x 2 + 10k x1) steps of APP type capacitor units confirming to IS- 13585 ( Part I ) 1994 with harmonic filter reactors, suitable for 75 kW load as per specification no ESD-APFC
Each
162196
25072.88
187269.00
4-4-6
4-4-7
4-4-8
4-4-9 (New)
4-4-10 (New)
4-4-11 (New)
Supplying and erecting 50 kVAR , 440 V Three phase, 50 cycles, THYRISTER SWITCHED MICRO APFC PASSIVE FILTER PANEL, consisting of (25k + 15k +10k) steps of APP type capacitor units confirming to IS- 13585 ( Part I ) 1994 with harmonic filter reactors, suitable for 100 kW load as per specification no ESD-APFC Supplying and erecting 80/100 kVAR , 440 V Three phase, 50 cycles, THYRISTER SWITCHED MICRO APFC PASSIVE FILTER PANEL, consisting of (25k x2 +15k x2) steps of APP type capacitor units confirming to IS- 13585 ( Part I ) 1994 with harmonic filter reactors, suitable for 150 kW load as per specification no ESD-APFC Supplying and erecting 125/150 kVAR , 440 V Three phase, 50 cycles, THYRISTER SWITCHED MICRO APFC PASSIVE FILTER PANEL, consisting of (25k x4 +15k x1 +10kx1) steps of APP type capacitor units confirming to IS- 13585 ( Part I ) 1994 with harmonic filter reactors, suitable for 200 kW load as per specification no ESD-APFC Supplying and erecting 200 kVAR , 440 V Three phase, 50 cycles, THYRISTER SWITCHED MICRO APFC PASSIVE FILTER PANEL, consisting of (25k x4 +15k x1 +10kx1) steps of APP type capacitor units confirming to IS- 13585 ( Part I ) 1994 with harmonic filter reactors, suitable for 200 kW load as per specification no ESD-APFC Supplying and erecting 250 kVAR , 440 V Three phase, 50 cycles, THYRISTER SWITCHED MICRO APFC PASSIVE FILTER PANEL, consisting of (25k x4 +15k x1 +10kx1) steps of APP type capacitor units confirming to IS- 13585 ( Part I ) 1994 with harmonic filter reactors, suitable for 200 kW load as per specification no ESD-APFC Supplying, erecting, testing, and commissioning of Digital Active 100 A Harmonic filter cum Power conditioner, with Digital Closed Loop Active Filter with Source Current Sensing, 32 bit, Digital Signal processing, High speed IGBTs in power circuit with necessary CTs to be mounted on existing cable/bus and shunted to supply as per specification No. ESD-ED/DAHF Supplying, erecting, testing, and commissioning of Digital Active 150 A Harmonic filter cum Power conditioner, with Digital Closed Loop Active Filter with Source Current Sensing, 32 bit, Digital Signal processing, High speed IGBTs in power circuit with necessary CTs to be mounted on existing cable/bus and shunted to supply as per specification No. ESD-ED/DAHF After doing quality analysis , if it is observed that filters are required to compensate only reactive power and not harmonics then the above items shall be used with proper designing.
Each
188137
25072.88
213210.00
Each
233533
25072.88
258606.00
Each
317840
25072.88
342913.00
Each
494867
25072.88
519940.00
Each
576215
25072.88
601288.00
Each
926663
1544.49
928207.00
4-4-12 (New)
Each
1042496
1544.49
1044040.00
Note :-
4.5 Miscellaneous
4-5-1
4-5-2
Supplying and erecting protector and Energy saver equipment working on 180-260 V cut off control with suitable MCB and built up timer + 3 minutes and automatic operation for 1 minute to 24 hours adjustable and all installed in M.S. powder coated box. Supplying and erecting an energy saver for air conditioner working on 180260 V cut off controlled voltage with suitable MCB for over current and short circuit protection, at least 3 minutes initial time delay with automatic operation from 1 minute to 24 hours settings . The unit is digitally controlled system with spike protector to enhance the life of the compressor and the unit is installed in MS powder coated box. Supplying and erecting Quartz Electronic time switch having 24 hour dial to work on 250V 50 cycle A.C. having built in rechargeable Nickel Cadmium batteries to run the time switch on failure of supply having switch contact rating upto 16A to use independently or in conjunction with contactor. Supplying and erecting two pole power contactor 250V 12A for time switch complete erected on wooden block/provided box, with necessary materials. Supplying and erecting two pole power contactor 250V 32A for time switch complete erected on wooden block/provided box, with necessary materials. Supplying and erecting 4 pole power contactor 440V 16A for time switch complete erected on wooden block/provided box, with necessary materials. Supplying and erecting 4 pole power contactor 440V 40A for time switch complete erected on wooden block/provided box, with necessary materials.
Each
5024
29.56
5054.00
Each
4020
29.56
4050.00
4-5-3
Each
2734
49.62
2784.00
4-5-4
Each
909
55.95
965.00
4-5-5
Each
3196
55.95
3252.00
4-5-6
Each
1021
55.95
1077.00
4-5-7
Each
4671
55.95
4727.00
4-5-8
Supplying and erecting Programmable Digital Almanac Timer Microcontroller based with real time clock to operate on derived switchingON & switching OFF street light as per daily sunset and sunrise respectively automatically having 4 digit LED continuous time display, relay output 230V / 10A with 10 Hrs battery backup and manual over drive facility capable to drive different capacity contactors timer erected in MS box in an approved manner. Supplying and erecting Mega Intelligent Energy Saver suitable up to 5 TR Window / Split Type Air Conditioning Unit working on voltage of 230V single phase solid state microprocessor based intelligent control wall mounting connected to indoor unit as per specification no ESD- AC Supplying and erecting Mega Intelligent Energy Saver suitable fo package Type Air Conditioning Unit working on voltage of 230V single phase solid state microprocessor based intelligent control wall mounting connected to indoor unit ESD- AC
Each
8102
55.95
8158.00
4-5-9
Each
6068
353.66
6422.00
4-5-10
409.61
7152.00
4-6-2
4-6-3
4-6-4
4-6-5
4-6-6
4-6-7
4-6-8
4-6-9
4-6-10
4-6-11
4-6-12
4-6-13
4-6-14
4-6-15
4-6-16
Supplying & Erecting approved make recess/surface type LED fittings of size 600 mm x 600 mm,12 W, with minimum 200 lux level at working plane 2m below & angle of dispersion of 90 degree, with P.F. > 0.95 with frosted glass (Equivalent to 1 x 18 W CFL ) as per specification no ESDLED /IDF Supplying & Erecting approved make recess/surface type LED fittings of size 600 mm x 600 mm,30 W, with minimum 300 lux level at working plane & angle of dispersion of 90 degree, with P.F. > 0.95 with frosted glass (Equivalent to 2 x 18 W CFL ) as per specification no ESD- LED /IDF Supplying & Erecting approved make recess/surface type LED fittings of size 1200 mm x 150 mm,15 W, with minimum 200 lux level at working plane 2m below with P.F. > 0.95 with frosted glass (Equivalent to 1 x 40 W FTL ) as per specification no ESD- LED /IDF Supplying & Erecting approved make recess/surface type LED fittings of size 1200mm x 150mm,30 W,with minimum 300 lux level at working plane 2m below with P.F. > 0.95 with frosted glass (Equivalent to 2 x 40 W FTL ) as per specification no ESD- LED /IDF Supplying & Erecting approved make recess/surface LED down lighter fitting of 150 mm dia round / square shape, 8W, with minimum 100 lux level at working plane with P.F. > 0.95 with frosted glass (Equivalent to 1 x 15 W CFL ) as per specification no ESD- LED /IDF Supplying & Erecting approved make recess/surface LED down lighter fitting of 150 mm dia round / square shape, 15 W, with minimum 150 lux level at working plane with P.F. > 0.95 with frosted glass (Equivalent to 2 x 15 W CFL ) as per specification no ESD- LED /IDF Supplying & Erecting approved make recess/surface LED down lighter fitting of 75 mm dia round / square shape, 5 W with minimum 50 lux level at working plane with P.F. > 0.95 with lens (Equivalent to 1 x 11 W CFL ) as per specification no ESD- LED /IDF Supplying & Erecting approved make recess/surface LED down lighter fitting of 125 mm dia round / square shape, 11 W,with minimum 150 lux level at working plane with P.F. > 0.95 with lens (Equivalent to 1 x 18 W CFL ) as per specification no ESD- LED /IDF Supplying & Erecting LED bulkhead Fitting of appropriate size with 8 W with minimum 50-70 lux level at ground level with p.f. > 0.95 with frosted glass (Equivalent to 1 x 18 watt CFL ) as per specification no ESD-LED /BHF Supplying & Erecting Spot light LED fitting of appropriate size with 6 W with minimum 75 lux level at ground level with p.f. > 0.95 with transparent lens (Equivalent to 1 x 35 W Halogen bulb ) as per specification no ESD- LED / HAL Supplying & Erecting Spot light LED fitting of appropriate size with 3 W with minimum 50 lux level at ground level with p.f. > 0.95 with transparent lens (Equivalent to 1 x 50 W Halogen bulb ) as per specification no ESD-LED /HAL Supplying & Erecting LED street light suitable with 12 W with minimum 68 lux level at ground level with p.f. > 0.95 with transparent lens (Equivalent to 2 x 11 W CFL ) as per specification no ESD-LED /ODF Supplying & Erecting LED street light suitable with 15 W with minimum 1012 lux level at ground level with p.f. > 0.95 with transparent lens (Equivalent to 2 x 18 W CFL ) as per specification no ESD-LED /ODF Supplying & Erecting LED street light suitable with 30 W with minimum 1820 lux level at ground level with p.f. > 0.95 with transparent lens (Equivalent to 2 x 36W CFL ) as per specification no ESD-LED /ODF Supplying & Erecting LED Flood Light fitting of appropriate size with 48 / 40 S W lux level at ground min 50 lux ,with p.f. > 0.95 with transparent lens (Equivelant to 75 W fitting) as per specification no ESD-LED /ODF Supplying & Erecting LED Flood Light fitting of appropriate size with 56/ 48 W lux level at ground min 50 lux ,with p.f. > 0.95 with transparent lens (Equivelant to 150 W fitting) as per specification no ESD-LED /ODF
Each
5249
82.34
5331.00
Each
14599
82.34
14681.00
Each
8784
82.34
8866.00
Each
14599
82.34
14681.00
Each
4429
82.34
4511.00
Each
4757
82.34
4839.00
Each
2461
82.34
2543.00
Each
4429
82.34
4511.00
Each
3691
82.34
3773.00
Each
2095
82.34
2177.00
Each
3120
82.34
3202.00
Each
5988
250.2
6238.00
Each
8530
250.2
8780.00
Each
10663
250.2
10913.00
Each
20496
250.2
20746.00
Each
22146
250.2
22396.00
4-6-17
4-6-18
Supplying & Erecting LED Flood Light fitting of appropriate size with 80 / 70 W lux level at ground min 50 lux ,with p.f. > 0.95 with transparent lens (Equivelant to 250 W fitting) as per specification no ESD-LED /ODF Supplying & Erecting LED Flood Light fitting of appropriate size with 115 / 100 W lux level at ground min 50 lux ,with p.f. > 0.95 with transparent lens (Equivelant to 400 Watts fitting) as per specification no ESD-LED /ODF Supplying & Erecting LED solar street light of appropriate size suitable for 50 lux level at ground level with mounting height of fitting 5-7 m height from ground with IP 65 ingress protection with 12/14 W , lux level at ground min 50 lux ,with p.f. > 0.95 with transparent lens as per specification no ESDLED /ODF Supplying & Erecting LED solar street light of appropriate size suitable for 50 lux level at ground level with mounting height of fitting 5-7 m height from ground with IP 65 ingress protection with 24/26 W , lux level at ground min 50 lux ,with p.f. > 0.95 with transparent lens as per specification no ESDLED /ODF Supplying & Erecting LED solar street light of appropriate size suitable for 50 lux level at ground level with mounting height of fitting 5-7 m height from ground with IP 65 ingress protection with 37 W , lux level at ground min 50 lux ,with p.f. > 0.95 with transparent lens as per specification no ESDLED /ODF Supplying & Erecting LED solar street light of appropriate size suitable for 50 lux level at ground level with mounting height of fitting 5-7 m height from ground with IP 65 ingress protection with 74 W , lux level at ground min 50 lux ,with p.f. > 0.95 with transparent lens as per specification no ESD-LED /ODF Supplying & Erecting foot light / pathway rechargeable 5 W LED fitting with 2 hrs backup , NI-CD/NI-MH rechargeable battery up to 24 hrs aluminium body with SS cover (IP 65) as per specification no ESD-LED /ODF Supplying & Erecting approved make recess/surface type LED fittings with 2 hrs battery backup of size 1200mm x 150mm,15 W,with minimum 0 200 lux level with 120 dispertion angle with brush steel finish housing at working plane 2m below with P.F. > 0.95 with frosted glass (Equivalent to 40 -50 FTG ) as per specification no ESD- LED /IDF Supplying & erecting Round LED flexible rope indoor light- 2 wire with 1.5 to 2 W per meter suitable for 240 V AC supply in any colour with 3400 degree kelvins to 7000 degree k with necessary material, wiring & connections etc. Supplying & erecting Flexible strip LED rope indoor light- 2 wire with 5 W per meter suitable for 240 V AC supply in any colour with 3400 degree kelvins to 7000 degree k with necessary material, wiring & connections etc. Supplying & erecting LED neon flex rope indoor light- 2 wire with 3 to 4 W per meter suitable for 240 V AC supply in any colour with 3400 degree kelvins to 7000 degree k with necessary material, wiring & connections etc. Supplying and erecting power cord ( Adaptor ) for Round LED / strip LED / neon flex LED rope light
Each
31168
250.2
31418.00
Each
34449
250.2
34699.00
4-6-19
Each
20647
250.2
20897.00
4-6-20
Each
18146
250.2
18396.00
4-6-21
Each
21747
250.2
21997.00
4-6-22
Each
40952
250.2
41202.00
4-6-23
Each
4429
82.34
4511.00
4-6-24 (New)
Each
7526
82.34
7608.00
4-6-25 (New)
Mtr.
391
5.28
396.00
4-6-26 (New)
Mtr.
811
5.28
816.00
4-6-27 (New)
Mtr.
1146
5.28
1151.00
4-6-28 (New)
Each
417
5.28
422.00
5-1-3
Each
781
47.51
829.00
5-1-4 5-1-5
Each Each
2262 800
47.51 47.51
2310.00 848.00
5-1-9
5-1-10
5-1-11
5-1-12
5-1-13
5-1-14
5-1-15
5-1-16
5-1-17
5-1-18
5-1-19
5-1-20
5-1-21
5-1-22
5-1-23
5-1-24
5-1-25
5-1-26
5-1-27
5-1-28
5-1-29
5-1-30
5-1-31
5-1-32
5-1-33
Supplying and erecting Triple pole metal/ iron clad re- wireable fuse switch 415/ 500V 200A on angle iron frame as per specification No. SWSWR/MTP Supplying and erecting Triple pole metal clad HRC fuse switch 415/ 500V 300A with ISI marked HRC fuses, on angle iron frame as per specification No.SW-SWR/TPHRC Supplying and erecting Triple pole iron clad HC type rewireable fuse and switch 415/ 500V 16A with neutral link on angle iron frame as per specification No.SW-SWR/MTP Supplying and erecting Triple pole iron clad H.C. type rewireable fuse and switch 415/ 500V 32A with neutral link on angle iron frame as per specification No. SW-SWR/MTP Supplying and erecting Triple pole iron clad H.C. type rewireable fuse and switch 415/ 500V 63A with neutral link on angle iron frame as per specification No. SW-SWR/MTP Supplying and erecting Triple pole metal/ iron clad switch and fuse 415/ 500V 100A with neutral link on angle iron frame as per specification No. SW-SWR/MTP Supplying and erecting Triple pole metal clad/ iron clad rewireable fuse 415/ 500V 200A with neutral link on angle iron frame as per specification No. SW-SWR/MTP Supplying and erecting Triple pole metal/ iron clad HRC fuse switch 415/ 500V 63A with neutral link with ISI marked HRC fuses on angle iron frame as per specification No.SW-SWR/TPHRC Supplying and erecting Triple pole metal/ iron clad HRC fuse switch 415/ 500 V.100 A. with neutral link with ISI marked HRC fuses on angle iron frame as per specification no. SW-SWR/TPHRC Supplying and erecting Triple pole metal/ iron clad HRC fuse switch 415/ 500V 200A with neutral link with ISI marked HRC fuses on angle iron frame as per specification No. SW-SWR/TPHRC Supplying and erecting Triple pole metal / iron clad HRC fuse switch 415/ 500V 300A with neutral link with ISI marked HRC fuses, on angle iron frame as per specification No. SW-SWR/TPHRC Supplying and erecting Triple pole metal clad HRC fuse switch 415/ 500V 400A with neutral link with ISI marked HRC fuses, on angle iron frame as per specification No. SW-SWR/TPHRC Supplying and erecting Triple pole metal clad HRC fuse switch 415/ 500V 500A with neutral link with ISI marked HRC fuses, on angle iron frame as per specification No. SW-SWR/TPHRC Supplying and erecting Triple pole metal clad HRC fuse switch 415/ 500V 630A with neutral link with ISI marked HRC fuses, on angle iron frame. As per specification No. SW-SWR/TPHRC Supplying and erecting Triple pole metal clad HRC fuse switch 415/ 500V 800A with neutral link with ISI marked HRC fuses, on angle iron frame as per specification No. SW-SWR/TPHRC Supplying & erecting Four pole Iron clad/metal clad ON LOAD change over switch 16A, 415/500V erected on angle iron frame approved make. Supplying & erecting Four pole Iron clad/metal clad ON LOAD change over switch 32A, 415/500V erected on angle iron frame approved make. Supplying & erecting Four pole Iron clad/metal clad ON LOAD change over switch 63A, 415/500V erected on angle iron frame approved make. Supplying & erecting on load four pole Iron clad/metal clad ON LOAD change over switch 100A, 415/ 500V erected on angle iron frame approved make. Supplying & erecting on load Four pole Iron clad/metal clad ON LOAD change over switch 200A, 415/500V erected on angle iron frame approved make. Supplying & erecting on load Four pole Iron clad/metal clad ON LOAD change over switch 300A, 415/500V erected on angle iron frame approved make. Supplying & erecting on load Four pole Iron clad/metal clad ON LOAD change over switch 400A, 415/500V erected on angle iron frame approved make. Supplying and erecting two pole iron clad/ metal clad ON LOAD change over switch 16A 250V erected on angle iron frame approved make and duly connected with suitable wire leads. Supplying and erecting two pole iron clad/ metal clad ON LOAD change over switch 32A 250V erected on angle iron frame approved make and duly connected with suitable wire leads. Supplying and erecting approved make ON LOAD Four Pole Automatic Transfer Switch suitable for 440V, 50 Hz, 100A capacity conforming to IEC: 60947-1 & IEC: 947-6-1/ IS: 13947-1, with Enclosure, automatic/manual inbuilt Time delay, high transfer speed, excellent breaking capacity, superior making capacity, compact & light weight, erected on provided angle iron frame and connected with provided leads.
Each
6173
125.63
6299.00
Each
13360
157.3
13517.00
Each
1070
47.51
1118.00
Each
1511
47.51
1559.00
Each
3376
63.34
3439.00
Each
4754
124.57
4879.00
Each
8696
157.3
8853.00
Each
5220
78.12
5298.00
Each
7317
118.24
7435.00
Each
11648
173.13
11821.00
Each
13671
173.13
13844.00
Each
20413
251.26
20664.00
Each
22720
251.26
22971.00
Each
24425
251.26
24676.00
Each
36158
251.26
36409.00
Each
1487
78.12
1565.00
Each
1773
78.12
1851.00
Each
4314
78.12
4392.00
Each
8320
118.24
8438.00
Each
12234
173.13
12407.00
Each
16351
235.42
16586.00
Each
24636
251.26
24887.00
Each
741
63.34
804.00
Each
994
63.34
1057.00
Each
42720
118.24
42838.00
5-1-34
Supplying and erecting approved make ON LOAD Four Pole Automatic Transfer Switch suitable for 440V, 50 Hz, 160A capacity conforming to IEC: 60947-1 & IEC: 947-6-1/ IS: 13947-1, with Enclosure, automatic/manual inbuilt Time delay, high transfer speed, excellent breaking capacity, superior making capacity, compact & light weight, erected on provided angle iron frame and connected with provided leads. Supplying and erecting approved make ON LOAD Four Pole Automatic Transfer Switch suitable for 440V, 50 Hz, 200A capacity conforming to IEC: 60947-1 & IEC: 947-6-1/ IS: 13947-1, with Enclosure, automatic/manual inbuilt Time delay, high transfer speed, excellent breaking capacity, superior making capacity, compact & light weight, erected on provided angle iron frame and connected with provided leads.
Each
52720
173.13
52893.00
5-1-35
Each
60653
173.13
60826.00
5-2-2
Each
449
24.28
473.00
5-2-3
Each
537
24.28
561.00
5-2-4
Each
685
24.28
709.00
5-2-5
Each
855
24.28
879.00
5-2-6
Each
1295
47.51
1343.00
5-2-7
Each
2286
47.51
2334.00
5-2-8
Each
3311
47.51
3359.00
5-2-9
Each
3836
55.95
3892.00
5-2-10
Each
3303
47.51
3351.00
5-2-11
Each
4274
47.51
4322.00
5-2-12
Each
5330
47.51
5378.00
5-2-13
Each
6712
63.34
6775.00
5-2-14
Each
31207
3545.04
34752.00
5-2-15
Each
47480
4011.66
51492.00
Note :-
1) For erection of switchgear on existing/provided angle iron frame/wooden board reduce the over all rate by 5%. 2) In coastal area iron clad switchgear shall be invariably used. 3) For Switchgear without enclosure for cubical panels the rates shall be decreased by 25 % of item no 5-1-16 to 5-1-23 4) If 'A' grade switchgears the overall rate shall be increased by 15% for item No.5-1-16 to 5-1-23.
5-3-3 5-3-4
Each Each
145 365
20.06 20.06
165.00 385.00
5-3-5 5-3-6
Each Each
324 530
20.06 20.06
344.00 550.00
5-3-7 5-3-8
Each Each
471 775
20.06 20.06
491.00 795.00
5-3-9 5-3-10
Each Each
757 476
20.06 20.06
777.00 496.00
5-3-11
Each
434
20.06
454.00
5-3-21
Each
578
38.01
616.00
5-3-22
Each
644
38.01
682.00
5-3-23
Each
780
55.95
836.00
5-4-2
Each
2288
142.52
2431.00
5-4-3
Each
2930
142.52
3073.00
5-4-4
Each
3894
142.52
4037.00
5-4-5
Each
5205
142.52
5348.00
5-4-6
Each
6864
142.52
7007.00
5-4-7
Each
2402
142.52
2545.00
5-4-8
Each
3566
142.52
3709.00
5-4-9
Each
4876
142.52
5019.00
5-4-10
Each
5694
142.52
5837.00
5-4-11
Each
6923
142.52
7066.00
5-4-12
Each
8660
142.52
8803.00
5-4-13
Each
199
22.17
221.00
5-4-14
Each
653
41.17
694.00
5-4-15
Each
837
41.17
878.00
5-4-16
Each
1058
41.17
1099.00
5-4-17
Each
1043
41.17
1084.00
5-4-18
Each
1308
41.17
1349.00
5-4-19
Each
1675
41.17
1716.00
5-4-20
5-4-21
5-4-22
5-4-26
5-4-27
Note :-
Supplying & erecting original 1.25 mm CRCA sheet metal enclosures with 20A. 2 pin plug & earth socket and 20A. 3 pin plug top with 20A/30A single pole MCB complete erected on angle iron frame. Supplying & erecting original 1.25 mm CRCA sheet metal enclosures with 30 A, 3 pin plug & earth socket and 30 A 3 pin plug top with 30 A. triple pole MCB complete erected on angle iron frame. Supplying & erecting original 1.25 mm CRCA sheet metal enclosures with 10A. 2 pin plug and earth socket and 10A, 3 pin plug top with 10A single pole miniature circuit breakers complete erected on angle iron frame. Supplying & erecting CRCA sheet metal one way enclosures suitable for D.P.M.C.B. /T.P. M.C.B. /F.P M.C.B. complete erected on angle iron frame. Supplying and erecting blanking plate of suitable size on MCB DB Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted suitable for 3 Pole MCCB as Incommer & outgoing SP MCB (12 Poles) or TP MCB of 4 ways (12 Poles) on iron frame. (Vertical Busbar type) as per specification no. SWSWR/MCBDB1 Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted suitable for 3 Pole MCCB as Incommer & outgoing SP MCB (24 Poles) or TP MCB of 8 ways (24 Poles) , on iron frame. (Vertical Busbar type) as per specification No. SWSWR/MCBDB1 Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted suitable for 3 Pole MCCB as Incommer & outgoing SP MCB (36 Poles) or TP MCB of 12 ways (36 Poles) on iron frame. (Vertical Busbar type) as per specification No. SWSWR/MCBDB1 1) All MCB's shall have breaking capacity not less than 10 kA. 2) Above rates are applicable only to factory made enclosures. 3) Reduce overall rates by 5% if angle iron frame is not required. 4) MCB's ( double pole, four pole or triple pole & neutral) & isolators for single phase circuits shall not be incorporated for outgoing circuits of three phase distribution board. 5) For more than 5 kW load RCCB/ELCB shall invariably be provided & erected on the same distribution board. (RCCB/ELCB+MCB) or (RCCB/ELCB+MCCB etc,) separate box for RCCB/ELCB is not permissible. 6) Above rates are for branded DB's with provision of same brand interior switchgears and if other than branded are used reduce material rate by 10% . 7) The MCBDB is exclusive of incoming MCB/MCCB and outgoing SP/TP MCB's and the same should be preferably of the same make
Each
896
47.51
944.00
Each
1732
47.51
1780.00
Each
884
41.17
925.00
339 14 6157
24.28 0 195.3
Each
7162
195.3
7357.00
Each
8284
195.3
8479.00
5-5-2
Each
10738
661.92
11400.00
5-5-3
Each
15600
661.92
16262.00
5-5-4
Each
21945
661.92
22607.00
5-5-5
Each
26265
1025.08
27290.00
5-5-6
Each
31687
1103.21
32790.00
Note :-
5-6-2
Each
2668
174.19
2842.00
5-6-3
5-6-4
5-6-5
5-6-6
5-6-7
5-6-8
5-6-9
5-6-10
5-6-11
5-6-12
5-6-13
5-6-14
Providing, erecting & commissioning RCCB only of electro magnetic type with 20 kA breaking capacity of 63 A. 2 pole complete as per specification No. SW-RCCB/RCCB Providing, erecting & commissioning RCCB only of electro magnetic type with 20 kA breaking capacity of 16/25A. 4 pole complete as per specification No. SW-RCCB/RCCB Providing, erecting & commissioning RCCB only of electro magnetic type with 20 KA breaking capacity of 40A. 4 pole complete as per specification No. SW-RCCB/RCCB Providing, erecting & commissioning RCCB of electro magnetic type with 20 kA breaking capacity of 63A. 4 pole complete as per specification No. SW-RCCB/RCCB Providing, erecting & commissioning RCCB of electro magnetic type with 20 kA breaking capacity of 80A. 4 pole complete as per specification No. SW-RCCB/RCCB Providing, erecting & commissioning approved make RCCB of electro magnetic type with 20 kA breaking capacity of 100A, 4 pole complete as per specification No. SW-RCCB/RCCB Supplying, fixing and commissioning RCCB+MCB, electro magnetic type 6 kA. breaking capacity of 6/10/16/20/25A, 2 Pole, 1 Phase as per specification No. SW-RCCB/RCCB Supplying, fixing and commissioning RCCB+MCB, electro magnetic type 6 kA. breaking capacity of 32A/40A 2 Pole 1 phase as per specification No. SW-RCCB/RCCB Supplying, fixing and commissioning RCCB+MCB, electro magnetic type 6 kA. breaking capacity of 63A, 2 Pole 1 Phase as per specification No. SW-RCCB/RCCB Supplying, fixing and commissioning RCCB+MCB, electro magnetic type 6 kA. breaking capacity of 6A/10A/16A/20A/25/A 4 Pole 3 phase as per specification No. SW-RCCB/RCCB Supplying, fixing and commissioning RCCB+MCB, electro magnetic type 6 kA. breaking capacity of 32A/40A 4 Pole 3 phase as per specification No. SW-RCCB/RCCB Supplying, fixing and commissioning RCCB+MCB, electro magnetic type 6 kA. breaking capacity of 63A 4 Pole 3 phase as per specification No. SW-RCCB/RCCB Supplying & fixing CRCA sheet Box with earthing terminals for housing 2 Pole RCCB/RCCB+MCB complete on iron frame/laminated board. Supplying & fixing CRCA sheet Box with earthing terminals for housing 4 Pole RCCB/RCCB+MCB complete on iron frame/laminated board. Deleted Deleted Deleted
Each
3462
174.19
3636.00
Each
3228
174.19
3402.00
Each
3306
174.19
3480.00
Each
3815
174.19
3989.00
Each
5318
174.19
5492.00
Each
5318
174.19
5492.00
Each
2359
174.19
2533.00
Each
3099
174.19
3273.00
Each
2593
174.19
2767.00
Each
3346
174.19
3520.00
Each
3449
142.52
3592.00
Each
3099
174.19
3273.00
Each Each
145 207
20.06 20.06
165.00 227.00
5-7-2
Each
34136
850.89
34987.00
5-7-3
Each
40293
850.89
41144.00
5-7-4
Each
43081
1240.45
44321.00
5-7-5
Each
63168
1631.06
64799.00
5-7-6
Each
34141
850.89
34992.00
5-7-7
Each
40567
850.89
41418.00
5-7-8
Each
46702
850.89
47553.00
5-7-9
Each
49507
1240.45
50747.00
5-7-10
Each
69577
1631.06
71208.00
5-7-11
Providing & erecting Incoming and Outgoing Cable Alleys suitable for MCCB panel board of 250A incoming and 2 way outgoing made from CRCA sheet 1.6 mm thick duly powder coated and having vertical insulated partition for shielding between the shared face of cableway and basic DB. Providing & erecting Incoming and Outgoing Cable Alleys suitable for MCCB panel board of 250A incoming and 4 way outgoing or 400A incoming and 2 way outgoing made from CRCA sheet 1.6 mm thick duly powder coated and having vertical insulated partition for shielding between the shared face of cableway and basic DB. Providing & erecting Incoming and Outgoing Cable Alleys suitable for MCCB panel board of 250A incoming and 6 way outgoing or 400A incoming and 4 way outgoing made from CRCA sheet 1.6 mm thick duly powder coated and having vertical insulated partition for shielding between the shared face of cableway and basic DB. Providing & erecting Incoming and Outgoing Cable Alleys suitable for MCCB panel board of 250A incoming and 8 way outgoing or 400A incoming and 6 way outgoing made from CRCA sheet 1.6 mm thick duly powder coated and having vertical insulated partition for shielding between the shared face of cableway and basic DB. Providing & erecting Incoming and Outgoing Cable Alleys suitable for MCCB panel board of 250A incoming and 12 way outgoing or 400A incoming and 6/8 way outgoing made from CRCA sheet 1.6 mm thick duly powder coated and having vertical insulated partition for shielding between the shared face of cableway and basic DB. Providing & erecting Incoming and Outgoing Cable Alleys suitable for MCCB panel board of 400A incoming and 12 way outgoing made from CRCA sheet 1.6 mm thick duly powder coated and having vertical insulated partition for shielding between the shared face of cableway and basic DB. 1) The MCCB panel board and cable alleys from above items are interconnected and should be of same make only and factory made only 2) The MCCB panel board is exclusive of incoming and outgoing MCCB's and the same should be preferably of the same make 3) In the MCCB panel both FP/TP MCCB's as incomer and FP/TP/ SP MCCB's can be provided as outgoing
Set.
11482
156.24
11638.00
5-7-12
Set.
13322
156.24
13478.00
5-7-13
Set.
15315
156.24
15471.00
5-7-14
Set.
15315
156.24
15471.00
5-7-15
Set.
17588
156.24
17744.00
5-7-16
Set.
20684
156.24
20840.00
Note :-
5-8-3
Each
65940
2253.92
68194.00
5-8-4
Each
67804
2253.92
70058.00
5-8-5
Each
93200
2253.92
95454.00
5-8-6
Each
108031
2253.92
110285.00
5-8-7
Each
112941
2253.92
115195.00
5-8-8
Each
142364
2253.92
144618.00
Each
88539
2253.92
90793.00
Each
131756
2253.92
134010.00
5-9-2
5-9-3
5-9-4
5-9-5
5-9-6
5-9-7
5-9-8
5-9-9
Supplying and erecting approved make extendable / non-extendable type 22 kV, 630A, load break switch with fuses of required rating, on provided MS channels / trench / foundation in an approved manner as per specification no SW-HTS / LBS Supplying and erecting approved make extendable / non-extendable type 11 kV 630A, Load break Isolator switch on provided MS channels / trench / foundation in an approved manner as per specification no SW-HTS / LBS Supplying and erecting approved make extendable / non-extendable type 22 kV 630A, load break Isolator switch on provided MS channels / trench / foundation in an approved manner as per specification no SW-HTS / LBS Supplying and erecting approved make 11 kV 400A, Oil Switch-Fuse unit extendable/non-extendable on provided MS channels / trench / foundation in an approved manner as per specification no SW-HTS / LBS Supplying & erecting 11 kV 630A, Indoor type Ring Main unit with 1or 2 Incoming & 2 or 1 Outgoing with HRC fuses complete erected on provided cc foundation/MS channels/trench, etc, in an approved manner as per specification no SW-HTS / RMU Supplying & erecting 22 kV 630A, Indoor type Ring Main unit with 1or 2 Incoming & 2 or 1 Outgoing with HRC fuses complete erected on provided c c foundation/MS channels/trench, etc, in an approved manner as per specification no SW-HTS / RMU Supplying and erecting approved make 11kV, 630A, Vacuum Circuit breaker of required rating, on provided MS channels / trench / foundation in an approved manner as per specification no SW-HTS / VCB Supplying and erecting approved make 22 kV, 630 A, Vacuum Circuit breaker of required rating, on provided MS channels / trench / foundation in an approved manner as per specification no SW-HTS / VCB Supplying and erecting 11kV HRC Fuse 10A to 40 A for load break switch to be fitted with necessary nut bolts and commissioning complete. Supplying and erecting11kV HRC Fuse 63A for load break switch to be fitted with necessary nut bolts and commissioning complete. Supplying and erecting22kV HRC Fuse 10A to 30A for load break switch to be fitted with necessary nut bolts and commissioning complete. Supplying and erecting22 kV HRC Fuse 63A for load break switch to be fitted with necessary nut bolts and commissioning complete. 1) The above items are for Indoor installation with IP 55 Protection Class. 2) For outdoor installations IP 65 Protection Class is to be proposed by increasing overall rates by 10%.
Each
234464
9455.9
243920.00
Each
143875
9455.9
153331.00
Each
266436
9455.9
275892.00
Each
150099
9455.9
159555.00
Each
330382
94228.61
424611.00
Each
628791
9455.9
638247.00
Each
530251
9455.9
539707.00
Each
826853
9455.9
836309.00
5-10-7
Each
73
6.33
79.00
5-10-8 5-10-9 5-10-10 5-10-11 5-10-12 5-10-13 5-10-14 5-10-15 5-10-16 5-10-17 5-10-18
Each Each Each Each Each Each Each Each Each Each Each
2.11 10.56 16.89 16.89 16.89 13.72 14.78 15.84 10.56 10.56 10.56
32.00 170.00 274.00 450.00 541.00 159.00 209.00 506.00 67.00 81.00 164.00
5-10-19 5-10-20 5-10-21 5-10-22 5-10-23 5-10-24 5-10-25 5-10-26 5-10-27 5-10-28 5-10-29 (New)
Supplying & erecting ISI marked HRC fuse cartridge 500V 200A Supplying & erecting ISI marked HRC fuse cartridge 500V 300A Supplying & erecting ISI marked HRC fuse cartridge 500V 400A Supplying & erecting approved make 500V 16A porcelain base neutral link complete erected in provided M.S. box. Supplying & erecting approved make 500V 32A porcelain base neutral link complete erected in provided M.S. box. Supplying & erecting approved make 500V 63A porcelain base neutral link complete erected in provided M.S. box. Supplying & erecting approved make 500V 100A porcelain base neutral link complete erected in provided M.S. box. Supplying & erecting approved make porcelain/epoxy bus bar support complete erected in provided M.S. box for 100A Supplying & erecting approved make porcelain/epoxy bus bar support complete erected in provided M.S. box for 200/300A Supplying & erecting approved make porcelain/epoxy bus bar support complete erected in provided M.S. box for 400A Supplying & erecting approved make 500V 200A porcelain base neutral link complete erected in provided M.S. box.
Each Each Each Each Each Each Each Each Each Each Each
10.56 10.56 10.56 8.45 8.45 8.45 14.78 7.39 7.39 7.39 14.78
232.00 311.00 711.00 56.00 78.00 113.00 205.00 37.00 61.00 81.00 357.00
5.11 Dismantling
5-11-1 5-11-2 5-11-3 Note :Dismantling the existing switchgears, DB, and Bus bar of any size complete with/ without board or angle iron frame Making the site clear of dismantled DB and switch gears by refilling the holes with cement mortar & finishing in an approved manner. Dismantling existing OCB, ACB,LBS,VCB complete from existing panel board in an approved manner. The rates for item no 5.11.1 to 5.11.3 are for dismantling and handing over to section office inclusive of transportation upto 25 km, between site and section office. Each Each Each 5 0 0 10.56 5.28 71.79 11.00 10.00 72.00
6-1-2
Sqm.
1304
278.7
1583.00
6-1-3
Sqm.
1634
278.7
1913.00
6-1-4
Sqm.
1343
278.7
1622.00
6-1-5
Sqm.
1112
217.47
1329.00
6-1-6
Sqm.
934
166.8
1101.00
6-1-7
Sqm.
790
217.47
1007.00
Note :6-1-8
Sqm.
1104
99.24
1203.00
6-1-9 6-1-10
Sqm. Sqm.
806 706
99.24 99.24
905.00 805.00
6-1-11
Sqm.
1303
99.24
1402.00
6-1-12
Sqm.
300
78.12
378.00
6-1-13
Sqm.
576
71.79
648.00
6-1-14
Sqm.
469
123.52
593.00
6-1-15
6-1-16
6-1-17
6-1-18
Supplying and erecting marine Plywood 19 mm thick fixed to wall or on provided panel board with necessary materials such as screws, wall fasteners supports, nuts bolts etc. complete. Supplying and erecting enamel iron G.I. sheet 1.25mm (18 gauge) caution board of size 200 x 150 mm. as per I.S. 2551 of 1982 in Marathi and Hindi erected at position. Supplying and erecting G.I. sheet of 1.25mm (18gauge) size 200 x 150 mm. duly painted with red oxide & enamel paint for displaying the department & date of erection of the electrical installation with approved shade as specified by the authority. Providing and erecting cupboard for enclosing switchgears or for any other purpose made from selected marine plywood planks 19 mm. thick duly varnished/ painted from inside and from outside with brass hinges and locking arrangement with suitable lock with duplicate keys. Cupboard duly grouted with suitable size of iron work in wall at the bottom. (Size of cupboard shall be specified in the estimate) Supplying and erecting Iron work for panel board or other purposes complete with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority (Size of angle/flat/channel iron to be specified in estimate) Supplying and erecting self locking arrangement with duplicate keys, made of brass duly erected, flush with surface of panel/cupboard. Supplying and erecting expanded metal jali enclosure made from G.I. square mesh 15 SWG having 20/25 mm square, complete, properly fixed/welded and duly painted with one coat of red oxide and two coats of silver/enamel paint (size of jali or enclosure to be specified in the estimate.)
Sqm.
1043
123.52
1167.00
Each
88
24.28
112.00
Each
31
29.56
61.00
Sqm.
2103
496.18
2599.00
6-1-19
Kg.
96
25.34
121.00
6-1-20 6-1-21
Each Sqm.
148 199
29.56 24.28
178.00 223.00
6-3-2
Each
3177
124.57
3302.00
6-3-3
Each
5033
158.36
5191.00
6-3-4
Each
5446
158.36
5604.00
6-3-5
Supplying and erecting kWH meter provided with maximum kW demand indicator for unbalanced load 3 phase 4 wire 50 cycles 230/440V AC supply with incorporated time switch of 30 minutes integration period and of 15 seconds tune required for decoupling, suitable to work on provided three numbers of instrument current transformers of class C accuracy with ratio 100/5 A -400/5 A complete with zero adjustment & test certificate from manufacturer erected on provided M.S. box and connected to CTs. Providing and erecting Analog type moving iron voltmeter for A.C Voltage 0 to 500V range, 50Hz, Accuracy class 1.5, flush type; on provided box / panel and connected with necessary PVC wire leads and lugs. Providing and erecting Analog type moving iron Ammeter for A.C current 0-30 A, direct range, 500V.Accuracy class 1.5, flush type on provided box/ panel and connecting with necessary PVC wire leads and lugs. Providing and erecting Analog type moving iron Ammeter for A.C current CT operated of suitable size in scale between 0 to 1000A, 500V accuracy class 1.5, flush type; on provided box /panel and connecting with provided CTs and necessary PVC wire leads and lugs. Supplying and erecting RKVAH meter 3 phase 4 wire 400 V. 50 cycles suitable for unbalanced load suitable to work on provided current transformer (3 Nos.) 100/5 Amp to 400/5A ratio with zero adjustment complete erected on provided M.S. box and connected to C.T.s. Supplying and erecting Power Factor Meter 150 mm. dia. flush or projection type suitable for 400V. 50 cycles 3 phase 4 wire balanced or unbalanced load to work with appropriately provided C.T.s 100/5A to 400/5A ratio and otheraccessories complete erected in provided M.S. box and connected to the circuit by means of PVC copper wire leads. Supplying and erecting panel mounting type digital ammeter having Three and half digit LED display, external C.T. operated, calibrated for 0 to 1000A AC suitable to operate on 500V AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer. Supplying and erecting panel mounting type digital voltmeter having Three and half digit LED display, calibrated for 0 to 750V AC suitable to operate on 500V AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer. Supplying and erecting digital frequency meter of 3 digit LED display having 0 to 100 Hz range suitable to operate on 500V AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer. While framing the estimate for P.F. meter / RKVAH meter, provision of 3 CTs should invariably be made separately. All meters shall be with manufacturer's calibration certificate.
Each
14609
281.87
14891.00
6-3-6
Each
622
124.57
747.00
6-3-7
Each
492
124.57
617.00
6-3-8
Each
679
124.57
804.00
6-3-9
Each
10316
281.87
10598.00
6-3-10
Each
6803
281.87
7085.00
6-3-11
Each
1159
158.36
1317.00
6-3-12
Each
1159
158.36
1317.00
6-3-13
Each
1835
158.36
1993.00
Note :-
6.4 H.T.Metering
6-4-1 6-4-2 Deleted Supplying, erecting, testing, commissioning 11 KV H.T. metering cubical (Compact Type) approved by MSEDCL/Licensee fabricated with 2mm.(14 SWG) M.S.sheets with supporting angle and channel, painted with powder coating / epoxy paint of required shade copper bus bar size 25x6 mm electronic security lock and heavy duty mechanical lock, with counter meter for measuring no of times the opening of doors, top side cover ( C.T.P.T COVER) interlock with meter doors, epoxy coated 3 nos C.T having required ratio between 5/5A to 100/5A burden 10 VA class 0.5 I.L.12/28/75 KVP epoxy terminal block suitable for provided trivector meter, and provision for incoming and outgoing cables etc complete duly tested by Licensee with necessary Test Certificates and erected on provided plinth/ C.C foundation Supplying, erecting, testing, commissioning 22 kV H.T. metering cubical (Compact Type) approved by MSEDCL/Licensee fabricated with 2mm.(14 SWG) M.S.sheets with supporting angle and channel, painted with powder coating / epoxy paint of required shade copper bus bar size 25x6 mm electronic security lock and heavy duty mechanical lock, with counter meter for measuring no of times the opening of doors, top side cover ( C.T.P.T COVER) interlock with meter doors, epoxy coated 3 nos C.T having required ratio between 5/5A to 100/5A burden 10 VA class 0.5 I.L.12/28/75 KVP epoxy terminal block suitable for provided trivector meter, and provision for incoming and outgoing cables etc complete duly tested by Licensee with necessary Test Certificates and erected on provided plinth/ C.C foundation Each Each 149097 7063.69 156161.00
6-4-3
Each
209769
7063.69
216833.00
6-4-4
Supplying, erecting, testing (by licencee), commissioning cubical comprising 11 kV H.T. metering, resin cast CTs, PTs, as per licencee's requirement, DO fuse set, AB switch 200 to 400A capacity duly interconnected with use of suitable insulators by maintening adequate clearences as per IS, complete housed in the encloser made up of MS structure and fiber glass 3 mm thick with gearbox & handle brought out for operating GOD, suitable door openings, locking arrangement etc complete duly tested by Licensee with necessary Test Certificates and erected on provided plinth/ C.C foundation Supplying, erecting, testing (by licencee), commissioning cubical comprising 22 kV H.T. metering, resin cast CTs, PTs, as per licencee's requirement, DO fuse set, AB switch 200 to 400A capacity duly interconnected with use of suitable insulators by maintening adequate clearences as per IS, complete housed in the encloser made up of MS structure and fiber glass 3 mm thick with gearbox & handle brought out for operating GOD, suitable door openings, locking arrangement etc complete duly tested by Licensee with necessary Test Certificates and erected on provided plinth/ C.C foundation .
Each
403954
35816.73
439771.00
6-4-5
Each
548051
35816.73
583868.00
6.5 Accessories
6-5-1 Providing and erecting Selector Switch suitable for Voltmeter/Ammeter for 3 phase A.C supply 500V, 50Hz, on provided box / panel and duly connecting with necessary PVC wire leads and lugs. Providing and erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 ratio with 15VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates. Supplying and erecting bank of metalised polypropylene condensers (MPP) with the standard capacities of 2,3,5,7,10,12.5 and 15 kVAR units of P.F. correction for operation on 3 phase 50 cycles 400/440V. (+10%) with externally discharging resistances, earthing terminals and built on angle iron or channel iron frame work and provided with terminal cover box complete erected on provided iron bracket or on floor duly tested by licensee. Supplying and erecting bank of mixdielectric condensors with the standard capacities of 2,3,5,7,10,12.5 and 15 kVAR units of P.F. correction for operation on 3 phase 50 cycles 400/440V. (+10%) with externally discharging resistances, earthing terminals and built on angle iron or channel iron frame work and provided with terminal cover box complete erected on provided iron bracket or on floor duly tested by licensee. Supplying and erecting bank of All Polypropylene condensors (APP type) with the standard capacities of 2,3,5,7,10,12.5 and 15 kVAR units of P.F. correction for operation on 3 phase 50 cycles 400/440V. (+10%) with externally discharging resistances, earthing terminals and built on angle iron or channel iron frame work and provided with terminal cover box complete erected on provided iron bracket or on floor duly tested by licensee. Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps 230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires. Supplying & erecting LED type indicating pilot lamp with LED colours Red / Yellow / Green, 230 / 250V on provided box / panel with necessary material, wiring & connections etc. Supplying & erecting LED type indicating pilot lamp with LED colour BLUE, 230 / 250 V on provided box / panel with necessary material, wiring & connections etc. Providing and erecting all bakelite test terminal block with bakelite cover and sealing arrangements erected on provided panel board and connected by the leads of the instrument (This block is to be provided wherever L. T. M. D. meters and RkVAH meters are to be tested.) 1) Erection of MPP type Capacitors shall be avoided. 2) In new installation APP type capacitors shall invariably be used. Each 562 25.34 587.00
6-5-2
Each
736
25.34
761.00
6-5-3
344
25.34
369.00
KVAR
6-5-4
759
25.34
784.00
KVAR
6-5-5
568
25.34
593.00
kVAR
6-5-6
Each
645
25.34
670.00
6-5-7
Each
233
25.34
258.00
6-5-8
Each
590
25.34
615.00
6-5-9
Each
480
25.34
505.00
Note :-
7-1-2
Mtr.
104
10.56
115.00
7-1-3
Supplying , erecting & TerminatingPVC armoured cable 2 core 6 sq mm aluminium conductor with continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Supplying , erecting & Terminating PVC armoured cable 2 core 10 sq mm aluminium conductor with continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Supplying , erecting & Terminating PVC armoured cable 3 core 2.5 sq mm aluminium conductor with continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Supplying & erecting PVC armoured cable 3 core 4 sq mm aluminium conductor with continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Supplying & erecting PVC armoured cable 3 core 6 sq mm aluminium conductor with continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Supplying , erecting & TerminatingPVC armoured cable 3 core 10 sq mm aluminium conductor with continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Supplying , erecting & Terminating PVC armoured cable 3 core 16 sq mm aluminium conductor with continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Supplying , erecting & Terminating PVC armoured cable 3 core 25 sq mm aluminium conductor with continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Supplying , erecting & Terminating PVC armoured cable 3 core 35 sq mm aluminium conductor with continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Supplying , erecting & Terminating PVC armoured cable 3 core 50 sq mm aluminium conductor with continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Supplying , erecting & Terminating PVC armoured cable 4 core 4 sq mm aluminium conductor with continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Supplying , erecting & Terminating PVC armoured cable 4 core 6 sq mm aluminium conductor with continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Supplying , erecting & Terminating PVC armoured cable 4 core 10 sq mm aluminium conductor with continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Supplying , erecting & Terminating PVC armoured cable 4 core 16 sq mm aluminium conductor with continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Supplying , erecting & Terminating PVC armoured cable 3 1/2 core 25 sq mm aluminium conductor with continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Supplying , erecting & Terminating PVC armoured cable 3 1/2 core 35 sq mm aluminium conductor with continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
Mtr.
124
10.56
135.00
7-1-4
Mtr.
133
10.56
144.00
7-1-5
Mtr.
111
10.56
122.00
7-1-6
Mtr.
111
10.56
122.00
7-1-7
Mtr.
140
10.56
151.00
7-1-8
Mtr.
150
10.56
161.00
7-1-9
Mtr.
168
17.95
186.00
7-1-10
Mtr.
204
17.95
222.00
7-1-11
Mtr.
254
17.95
272.00
7-1-12
Mtr.
313
17.95
331.00
7-1-13
Mtr.
132
17.95
150.00
7-1-14
Mtr.
153
17.95
171.00
7-1-15
Mtr.
158
17.95
176.00
7-1-16
Mtr.
195
17.95
213.00
7-1-17
Mtr.
237
17.95
255.00
7-1-18
Mtr.
277
17.95
295.00
7-1-19
Supplying , erecting & Terminating PVC armoured cable 3 1/2 core 50 sq mm aluminium conductor with continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Supplying , erecting & Terminating PVC armoured cable 3 1/2 core 70 sq mm aluminium conductor with continuous 8.35 sq mm (10 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Supplying , erecting & Terminating PVC armoured cable 3 1/2 core 95 sq mm aluminium conductor with continuous 8.35 sq mm (10 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Supplying , erecting & Terminating PVC armoured cable 4 core 25 sq mm aluminium conductor with continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Supplying , erecting & Terminating PVC armoured cable 4 core 35 sq mm aluminium conductor with continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Supplying , erecting & TerminatingPVC armoured cable 4 core 50 sq mm aluminium conductor with continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Supplying , erecting & TerminatingPVC armoured cable 4 core 70 sq mm aluminium conductor with continuous 8.35 sq mm (10 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Supplying , erecting & Terminating PVC armoured cable 4 core 95 sq mm aluminium conductor with continuous 8.35 sq mm (10 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe asper specification no. CB-LT/AL Supplying , erecting & Terminating PVC armoured cable 3 1/2 core 120 sq mm aluminium conductor with continuous 12.97 sq mm (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Supplying , erecting & Terminating PVC armoured cable 3-1/2 core 150 sq mm aluminium conductor with continuous 12.97 sq mm (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Supplying , erecting & Terminating PVC armoured cable 1100 V. 3-1/2 core 185 sq mm aluminium conductor with continuous 12.97 sq mm (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Supplying , erecting & Terminating PVC armoured cable 3-1/2 core 240 sq mm aluminium conductor with continuous 12.97 sq mm (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Supplying , erecting & Terminating PVC armoured cable 3-1/2 core 300 sq mm aluminium conductor with continuous 12.97 sq mm (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Supplying , erecting & Terminating PVC armoured cable 3-1/2 core 400 sq mm aluminium conductor with continuous 12.97 sq mm (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Re-erecting PVC armoured cable 2 to 4 Core up to 50 sq mm on wall with necessary material & G.I. earth wire in an approved manner. 1) Add Rs. 3/- per meter for erection of cables on stone wall. 2) Rate of all cables includes cost of lugs, glands, etc. required for erection and connection of cable. 3) For all type of cables instead of reading supplying and erecting read as a supplying, erecting and terminating.
Mtr.
367
29.56
397.00
7-1-20
Mtr.
472
29.56
502.00
7-1-21
Mtr.
573
29.56
603.00
7-1-22
Mtr.
257
29.56
287.00
7-1-23
Mtr.
312
29.56
342.00
7-1-24
Mtr.
401
29.56
431.00
7-1-25
Mtr.
519
29.56
549.00
7-1-26
Mtr.
637
29.56
667.00
7-1-27
Mtr.
717
33.78
751.00
7-1-28
Mtr.
831
52.79
884.00
7-1-29
Mtr.
1025
52.79
1078.00
7-1-30
Mtr.
1308
78.12
1386.00
7-1-31
Mtr.
1600
78.12
1678.00
7-1-32
Mtr.
2017
78.12
2095.00
7-1-33 Note :-
Mtr.
22
10.56
33.00
7-2-2
Mtr.
166
10.56
177.00
7-2-3
Mtr.
213
10.56
224.00
7-2-4
Mtr.
314
10.56
325.00
7-2-5
Mtr.
162
10.56
173.00
7-2-6
Mtr.
207
10.56
218.00
7-2-7
Mtr.
274
10.56
285.00
7-2-8
Mtr.
414
10.56
425.00
7-2-9
Mtr.
252
17.95
270.00
7-2-10
Mtr.
340
17.95
358.00
7-2-11
Mtr.
502
17.95
520.00
7-2-12
Mtr.
725
17.95
743.00
7-2-13
Supplying , erecting & Terminating PVC armoured cable 4 core 25 sq mm copper conductor with continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
Mtr.
1190
17.95
1208.00
7-2-14 (New)
Supplying , erecting & Terminating PVC armoured cable 4 core 35 sq mm copper conductor with continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
Mtr.
1418
17.95
1436.00
7-2-15 (New)
Supplying , erecting & Terminating PVC armoured cable 4 core 50 sq mm copper conductor with continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
Mtr.
1989
17.95
2007.00
Note :-
1) Add Rs. 3/- per meter for erection of cables on stone wall. 2) Rate of all cables includes cost of lugs, glands, etc. required for erection and connection of cable. 3) For all type of cables instead of reading supplying and erecting read as a supplying, erecting and terminating.
7-3-2
Mtr.
1105
30.62
1136.00
7-3-3
Mtr.
1254
30.62
1285.00
7-3-4
Mtr.
1436
30.62
1467.00
7-3-5
Mtr.
1474
30.62
1505.00
7-3-6
Mtr.
1637
30.62
1668.00
7-3-7
Mtr.
1534
30.62
1565.00
7-3-8
Mtr.
1977
30.62
2008.00
7-3-9
Mtr.
2124
30.62
2155.00
7-3-10
Mtr.
1418
40.12
1458.00
7-3-11
Mtr.
1638
40.12
1678.00
7-3-12
Mtr.
2009
40.12
2049.00
7-3-13
Mtr.
2044
40.12
2084.00
7-3-14
Mtr.
2779
40.12
2819.00
Note :-
7.4 Cable Joints & End Termination Kits Cable Joints & End Termination Kits (LT Cables) (JT/LT)
7-4-1
7-4-2
7-4-3
7-4-4
7-4-5
7-4-6
7-4-7
7-4-8
7-4-9
7-4-10
7-4-11
7-4-12
7-4-13
Providing & erecting epoxy straight through joint outdoor/indoor for LT PVC armoured cable 2.5 to 16 sq mm. cable, with necessary material as per specification No. CB-JT/LT Providing & erecting epoxy straight through joint outdoor/indoor for LT PVC armoured cable 25 to 50 sq mm. cable, with necessary material as per specification No. CB-JT/LT Providing & erecting epoxy straight through joint outdoor/indoor for LT PVC armoured cable 70 to 95 sq mm cable, with necessary material as per specification No. CB-JT/LT Providing & erecting epoxy straight through joint outdoor/indoor for LT PVC armoured cable 120 to 185 sq.mm. cable, with necessary material as per specification No. CB-JT/LT Providing & erecting epoxy straight through joint outdoor/indoor for LT PVC armoured cable 240 sq.mm. cable, with necessary material as per specification No. CB-JT/LT Providing & erecting epoxy straight through joint outdoor/indoor for LT PVC armoured cable 300 sq.mm. cable, with necessary material as per specification No. CB-JT/LT Providing & erecting epoxy straight through joint outdoor/indoor for LT PVC armoured cable 400 sq.mm. cable, with necessary material as per specification No. CB-JT/LT Providing & erecting epoxy outdoor/indoor end termination kit for LT PVC armoured cable 2.5 to 16 sq.mm. cable, with necessary material as per specification No. CB-JT/LT Providing & erecting epoxy outdoor/indoor end termination kit for LT PVC armoured cable 25 to 50 sq.mm. cable, with necessary material as per specification No. CB-JT/LT Providing & erecting epoxy outdoor/indoor end termination kit for LT PVC armoured cable 70 to 120 sq.mm. cable, with necessary material as per specification No. CB-JT/LT Providing & erecting epoxy outdoor/indoor end termination kit for LT PVC armoured cable 150 to 185 sq.mm. cable, with necessary material as per specification No. CB-JT/LT Providing & erecting epoxy outdoor/indoor end termination kit for LT PVC armoured cable 225 to 300 Sq.mm. cable, with necessary material as per specification no. CB-JT/LT Providing & erecting epoxy outdoor/indoor end termination kit for LT PVC armoured cable 400 sq.mm. cable, with necessary material as per specification No. CB-JT/LT
Each
547
157.3
704.00
Each
851
157.3
1008.00
Each
1590
245.98
1836.00
Each
1300
350.49
1650.00
Each
2175
350.49
2525.00
Each
2084
401.17
2485.00
Each
2911
488.79
3400.00
Each
171
157.3
328.00
Each
226
157.3
383.00
Each
269
245.98
515.00
Each
386
350.49
736.00
Each
463
350.49
813.00
Each
596
488.79
1085.00
7.5 Cable Joints & End Termination Kits (HT Cables) (JT/HT)
7-5-1 Providing and erecting Heat shrinkable indoor termination kit for 11 kV ( E ) XLPE HT cable 3x70 to 120 sq. mm. with necessary material as per specification No. CB-JT/HT Providing and erecting Heat shrinkable indoor termination kit for 22 kV ( E ) XLPE HT cable 3x70 to 120 sq. mm. with necessary material as per specification No. CB-JT/HT Providing and erecting Heat shrinkable indoor termination kit for 33 kV ( E ) XLPE HT cable 3x70 to 95 sq. mm. with necessary material as per specification No. CB-JT/HT Providing and erecting Heat shrinkable indoor termination kit for 11 kV ( E ) XLPE HT cable 3x150 to 185 sq. mm. with necessary material as per specification No. CB-JT/HT Providing and erecting Heat shrinkable indoor termination kit for 22 kV ( E ) XLPE HT cable 3x150 to 185 sq. mm. with necessary material as per specification No. CB-JT/HT Providing and erecting Heat shrinkable indoor termination kit for 33 kV ( E ) XLPE HT cable 3x120 to 185 sq. mm. with necessary material as per specification No. CB-JT/HT Providing and erecting Heat shrinkable indoor termination kit for 11 kV ( E ) XLPE HT cable 3x240 to 400sq. mm. with necessary material as per specification No. CB-JT/HT Providing and erecting Heat shrinkable indoor termination kit for 22 kV ( E ) XLPE HT cable 3x240 to 400 sq. mm. with necessary material as per specification No. CB-JT/HT Providing and erecting Heat shrinkable indoor termination kit for 33 kV ( E ) XLPE HT cable 3x240 to 400 sq. mm. with necessary material as per specification No. CB-JT/HT Providing and erecting Heat shrinkable out door termination kit for 11 kV ( E ) XLPE HT cable 3x70 to 120 sq mm with necessary material as per specification No. CB-JT/HT Providing and erecting Heat shrinkable out door termination kit for 22 kV ( E ) XLPE HT cable 3x70 to 120 sq mm cable with necessary material as per specification No. CB-JT/HT Each 5128 702.04 5830.00
7-5-2
Each
6991
702.04
7693.00
7-5-3
Each
10930
702.04
11632.00
7-5-4
Each
5382
702.04
6084.00
7-5-5
Each
8532
702.04
9234.00
7-5-6
Each
12332
702.04
13034.00
7-5-7
Each
7191
702.04
7893.00
7-5-8
Each
10712
702.04
11414.00
7-5-9
Each
16806
702.04
17508.00
7-5-10
Each
7292
752.71
8045.00
7-5-11
Each
11627
752.71
12380.00
7-5-12
7-5-13
7-5-14
7-5-15
7-5-16
7-5-17
7-5-18
7-5-19
7-5-20
7-5-21
7-5-22
7-5-23
7-5-24
7-5-25
7-5-26
7-5-27
Providing and erecting Heat shrinkable out door termination kit for 33 kV ( E ) XLPE HT cable 3x70 to 95 sq. mm. with necessary material as per specification No. CB-JT/HT Providing and erecting Heat shrinkable outdoor termination kit for 11 kV ( E ) XLPE HT cable 3x150 to 185 sq. mm. with necessary material as per specification no. CB-JT/HT Providing and erecting Heat shrinkable outdoor termination kit for 22 kV ( E ) XLPE HT cable 3x150 to 185 sq. mm. with necessary material as per specification No. CB-JT/HT Providing and erecting Heat shrinkable outdoor termination kit for 33 kV ( E ) XLPE HT cable 3x120 to 185 sq. mm. with necessary material as per specification No. CB-JT/HT Providing and erecting Heat shrinkable outdoor termination kit for 11 kV ( E ) XLPE HT cable 3x240 to 400 sq. mm. with necessary material as per specification No. CB-JT/HT Providing and erecting Heat shrinkable outdoor termination kit for 22 kV ( E ) XLPE HT cable 3x240 to 400 sq. mm. with necessary material as per specification No. CB-JT/HT Providing and erecting Heat shrinkable outdoor termination kit for 33 kV ( E ) XLPE HT cable 3x240 to 400 sq. mm. with necessary material as per specification No. CB-JT/HT Providing and erecting Heat shrinkable Straight through joint kit for 11 kV ( E ) XLPE HT cable 3x70 to 120 sq. mm. with necessary material as per specification No. CB-JT/HT Providing and erecting Heat shrinkable Straight through joint kit for 22 kV ( E ) XLPE HT cable 3x70 to 120 sq. mm with necessary material as per specification No. CB-JT/HT Providing and erecting Heat shrinkable Straight through joint kit for 33 kV ( E ) XLPE HT cable 3x70 to 95 sq mm with necessary material as per specification No. CB-JT/HT Providing and erecting Heat shrinkable Straight through joint kit for 11 kV ( E ) XLPE HT cable 3x150 to 240 sq. mm. with necessary material as per specification No. CB-JT/HT Providing and erecting Heat shrinkable Straight through joint kit for 22 kV ( E ) XLPE HT cable 3x150 to 240 sq. mm. with necessary material as per specification No. CB-JT/HT Providing and erecting Heat shrinkable Straight through joint kit for 33 kV ( E ) XLPE HT cable 3x120 to 185 sq. mm. with necessary material as per specification No. CB-JT/HT Providing and erecting Heat shrinkable Straight through joint kit for 11 kV ( E ) XLPE HT cable 3x300 to 400 sq. mm. with necessary material as per specification No. CB-JT/HT Providing and erecting Heat shrinkable Straight through joint kit for 22 kV ( E ) XLPE HT cable 3x300 to 400 sq. mm with necessary material as per specification No. CB-JT/HT Providing and erecting Heat shrinkable Straight through joint kit for 33 kV ( E ) XLPE HT cable 3x300 to 400 sq mm with necessary material as per specification No. CB-JT/HT
Each
16038
752.71
16791.00
Each
7734
752.71
8487.00
Each
11953
752.71
12706.00
Each
16806
752.71
17559.00
Each
9354
752.71
10107.00
Each
15558
752.71
16311.00
Each
19906
752.71
20659.00
Each
17526
877.29
18403.00
Each
31413
877.29
32290.00
Each
41467
877.29
42344.00
Each
18791
877.29
19668.00
Each
33241
877.29
34118.00
Each
51170
877.29
52047.00
Each
21068
877.29
21945.00
Each
38989
877.29
39866.00
Each
43461
877.29
44338.00
7-6-2
Mtr.
176
9.5
186.00
7-6-3
Mtr.
217
14.78
232.00
7-6-4
Mtr.
347
14.78
362.00
7-6-5
Mtr.
265
220.64
486.00
7-6-6
Mtr.
160
133.02
293.00
7-6-7
Mtr.
360
220.64
581.00
7-6-8
7-6-9
7-6-10
7-6-11
7-6-12
7-6-13
7-6-14
7-6-15
7-6-16
7-6-17
7-6-18
Note :-
Supplying & laying (including excavation) 25 cm Dia half round RCC Hume pipe of standard thickness at required depth up to 90 cms. below road / ground surface, for enclosing provided cable & necessary back filling with light ramming to make the road/ground surface as it was (Except bitumen carpet). Providing & laying 50 mm dia G.I. pipe B grade for enclosing cable below ground/road surface, complete as per specification No. CW-PLB/GP, para 4.2.3 (Chapter 17.5) Providing & laying 75 mm dia G.I. pipe B grade for enclosing cable below ground/road surface, complete as per specification No. CW-PLB/GP, para 4.2.3 (Chapter 17.5) Supplying and laying (including excavation) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. Supplying and laying (including excavation) 77 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. Supplying and laying (including excavation) 90 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. Supplying and laying (including excavation) 120 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. Supplying and laying (including excavation) 146 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. Supplying and laying (including excavation) 160 mm outside dia, double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. Supplying and laying (including excavation) 175 mm outside dia, double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. Supplying and laying (including excavation) 200 mm outside dia, double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. 1)For erection of G I pipe on stone wall add Rs.3/- per meter to the overall rate. 2)All the GI pipes and DWC pipes shall be ISI marked. 3) DWC pipe shall be preferably used for the length where possibility of damaging of cable is more. If DWC pipe for length of more than 25m is to be used depending on environmental condition , approval should be taken from concerned Superintending Engineer 4) For running the cable across the field / along the road , it should be covered by half round Hume Pipe only.
Mtr.
216
133.02
349.00
Mtr.
259
145.69
405.00
Mtr.
410
145.69
556.00
Mtr.
61
145.69
207.00
Mtr.
70
145.69
216.00
Mtr.
114
145.69
260.00
Mtr.
156
145.69
302.00
Mtr.
210
145.69
356.00
Mtr.
229
145.69
375.00
Mtr.
262
145.69
408.00
Mtr.
442
145.69
588.00
7-7-2
Each
27
14.78
42.00
7-7-3
Each
48
22.17
70.00
7-7-4
Each
59
22.17
81.00
7-7-5 7-7-6 7-7-7 7-7-8 7-7-9 7-7-10 7-7-11 7-7-12 7-7-13 Note :-
7-8-2
Each
407
24.28
431.00
7-8-3
Each
657
24.28
681.00
7-8-4
Each
263
24.28
287.00
Supplying & erecting crimping type aluminium lugs for cable 300 sq mm complete as per specification No. CB-CL/AL Supplying & erecting crimping type aluminium lugs for cable 400 sq mm complete as per specification No. CB-CL/AL Lugs are to be provided at time of joints/repairs.
Each Each
80 115
23.23 23.23
103.00 138.00
7.11 Dismantling
7-11-1 7-11-2 7-11-3 Dismantling the existing cables of all types & sizes Refilling the holes for dismantled cables with cement mortar & finishing in an aproved manner etc. complete Dismantling the existing underground cable without damaging it with glands, cable end box including refilling the trench up to ground level and making coils complete. 1)The rates for item no 7.11.1 to 7.11.3 are for dismantling and handing over to section office inclusive of transportation upto 25 km, between site and section office. 2)Item No 7.11.3 shall be used only when the cost of dismantled cable is more than Rs. 23/- per meter. Mtr. Mtr. Mtr. 0 15 0 20.06 20.06 24.28 20.00 35.00 24.00
Note :-
8-1-2
Each
11468
399.05
11867.00
Note :8-1-3
Each
14765
533.13
15298.00
Note :8-1-4
Each
12984
529.96
13514.00
8-1-5
Each
14208
693.59
14902.00
8-1-6
Each
20742
945.91
21688.00
8-1-7
Mtr.
822
98.18
920.00
8-1-8
Mtr.
1356
146.74
1503.00
8-1-9
Mtr.
1046
146.74
1193.00
Note :8-1-10
Mtr.
1234
146.74
1381.00
8-1-11
Mtr.
696
98.18
794.00
Note :8-1-12
Mtr.
1945
210.08
2155.00
8-1-13
Mtr.
1577
163.63
1741.00
Note :-
8-1-14
8-1-15
8-1-16
8-1-17
As per contour of the site and position of different obstacles/layout the length of RSJ pole to be considered for each pole and the measurement sheet should be attached in estimate/bill. Necessary arrangement for earthing shall be provided, also the base plate should be taken separately for each pole Supplying and erecting ISI mark G.I. pipe pole B grade 75/80 mm dia 6 m long with pole cap, base plate in provided foundation as per specification No. OH-PL/GIP Supplying and erecting M.S. pipe pole B grade 75/80 mm dia 6 m long with pole cap, base plate in provided foundation as per specification No. OHPL/GIP Supplying and erecting steel tubular swaged type welded pole with upper portion hydraulically bent swan neck, 165.1 x 139.7 x 114.3 mm dia with 4.5 x 4.50 x 3.65 mm thickness (5 + 2 + 3 m) respectively (net vertical height 9 m.) total length 10 m long with base plate in provided foundation.(weight 156.75 kg) as per specification No. OH-PL/STP Supplying and erecting steel tubular swaged type welded pole with upper portion bent swan neck, 165.1 x 139.7 x 114.3 mm dia. with 4.5 x 4.5 x 3.65 mm thickness (5.6 + 2.7 + 2.7 m) respectively total 11 m long long with base plate in provided foundation.(weight 175 kg) as per specification No.OH-PL/STP
Each
3788
215.36
4003.00
Each
3357
215.36
3572.00
Each
13453
636.59
14090.00
Each
14665
15481.84
30147.00
8.2 PSC / Spun / GRP Poles (OH-PSC/ SPN / GRP) PSC Poles
8-2-1 Supplying and erecting PSC rectangular pole of top 90 x 102 / 105 mm & bottom of 90 x 275 mm 8 m long (345 kg) complete erected in provided C. C. foundation & muffing (square/round) as per specification No. OH-PL/PSC Supplying and erecting PSC rectangular pole of top 105 x 115 mm & bottom of 105 x 315 mm 9 m long (510 kg complete erected in provided C. C. foundation & muffing (square/round) as per specification No. OH-PL/PSC Spun Poles Deleted Deleted Deleted Deleted Deleted GRP Poles Supplying and erecting glass reinforced polymer composit (GRP) with high impact strength in square ( top and bottom dia 75 mm ) / conical ( top dia 76mm and bottom dia 143 mm) shape and thickness 6 mm having height 4 m designed to withstand wind load upto 180 km/ hr as per specification No.OH-PL/GRP Supplying and erecting glass reinforced polymer composit (GRP) with high impact strength in conical ( top dia 76mm and bottom dia 176 mm) shape and thickness 6 mm having height 6 m designed to withstand wind load upto 180 km/ hr as per specification No.OH-PL/GRP Supplying and erecting glass reinforced polymer composit (GRP) with high impact strength in conical (top dia 76mm and bottom dia 227 mm) shape and thickness 6 mm having height 9 m designed to withstand wind load upto 180 km/ hr as per specification No.OH-PL/GRP Supplying and erecting glass reinforced polymer composit (GRP) with high impact strength in conical (top dia 76mm and bottom dia 260 mm) shape and thickness 6 mm having height 11 m designed to withstand wind load upto 180 km/ hr as per specification No.OH-PL/GRP Supplying and erecting glass reinforced polymer composit (GRP) with high impact strength in conical (top dia 76mm and bottom dia 293 mm) shape and thickness 10 mm having height 13 m designed to withstand wind load upto 180 km/ hr as per specification No.OH-PL/GRP Supplying & erecting single arm bracket (GRP) with length 1000 mm and 48 mm dia having height 280 mm suitable for conical / square GRP Poles. Bracket includes cap ,arms for fitting and connecting part in GRP moulded case and easy to insert on pole top and fitting with necessary hardware as per specification No.OH-PL/GRP Supplying & erecting double arm bracket (GRP) with length 1000 mm and 48 mm dia for each arm having height 280 mm suitable for conical / square GRP Poles. Bracket includes cap ,arms for fitting and connecting part in GRP moulded case and easy to insert on pole top and fitting with necessary hardware as per specification No.OH-PL/GRP Supplying & erecting internal junction box (small) GRP suitable for providing MCB / HRC Fuse for conical / square GRP Poles for pole upto 6 mtrs in height as per specification No.OH-PL/GRP Supplying & erecting internal junction box (big) GRP suitable for providing MCB / HRC Fuse for conical / square GRP Poles for pole above 6 mtrs in height as per specification No.OH-PL/GRP Each 1825 730.54 2556.00
8-2-2
Each
2502
1066.26
3568.00
8-2-9
Each
16376
1066.26
17442.00
8-2-10
Each
28164
1066.26
29230.00
8-2-11
Each
45921
1066.26
46987.00
8-2-12
Each
61689
1066.26
62755.00
8-2-13
Each
6382
145.69
6528.00
8-2-14
Each
9786
145.69
9932.00
8-2-15
Each
2979
145.69
3125.00
8-2-16
Each
8679
145.69
8825.00
8-2-17
Supplying & erecting base bracket (GRP) with necessary SS 304 hardware to hold the two compartments of GRP base brackets and 8 nos 16 mm long foundation nut bolts (EN-8) on provided foundation suitable for conical / square GRP poles. Bracket height is 750 mm and pitch circle dia 550 mm as per specification No.OH-PL/GRP GRP Poles shall be used only in highly corrosive and costal area
Each
10130
145.69
10276.00
Note :-
8-3-4
Set.
219348
46505
265853.00
8-3-5
Set.
269195
51783
320978.00
Each
1960
184.75
2145.00
Each
3767
184.75
3952.00
8-3-10 (New)
Each
4962
915.29
5877.00
8-3-11 (New)
Each
6140
915.29
7055.00
8-3-12 (New)
Each
7285
915.29
8200.00
8-3-13 (New)
Each
8686
915.29
9601.00
8-3-14 (New)
Each
9754
1372.41
11126.00
8-3-15 (New)
Each
11468
1372.41
12840.00
8-3-16 (New)
Each
13861
1524.43
15385.00
Each
16641
1524.43
18165.00
Each
22454
1829.53
24284.00
Each
27318
1829.53
29148.00
8-3-20 (New)
Providing & erecting 3 m high galvanised CONICAL pole with bottom of 107 to 115 mm A/F, top 65 to 75 mm A/F on provided foundation as per specification No. OH-PL/PSC Providing & erecting 4 m high galvanised CONICAL pole with bottom of 118 to 130 mm A/F, top 65 to 75 mm A/F on provided foundation as per specification No. OH-PL/PSC Providing & erecting 5 m high galvanised CONICAL pole with bottom of 129 to 145 mm A/F, top 65 to 75 mm A/F on provided foundation as per specification No. OH-PL/PSC Providing & erecting 6 m high galvanised CONICAL pole with bottom of 140 to 160 mm A/F, top 65 to 75 mm A/F on provided foundation as per specification No. OH-PL/PSC Providing & erecting 7 m high galvanised CONICAL pole with bottom of 151 to 175 mm A/F, top 65 to 75 mm A/F on provided foundation as per specification No. OH-PL/PSC Providing & erecting 8 m high galvanised CONICAL pole with bottom of 162 to 190 mm A/F, top 65 to 75 mm A/F on provided foundation as per specification No. OH-PL/PSC Providing & erecting 9 m high galvanised CONICAL pole with bottom of 173 to 200 mm A/F, top 65 to 75 mm A/F on provided foundation as per specification No. OH-PL/PSC Providing & erecting 10 m high galvanised CONICAL pole with bottom of 184 to 200 mm A/F, top 65 to 75 mm A/F on provided foundation as per specification No. OH-PL/PSC Providing & erecting 11 m high galvanised CONICAL pole with bottom of 206 to 245 mm A/F, top 70 to 85 mm A/F on provided foundation as per specification No. OH-PL/PSC Providing & erecting 12 m high galvanised CONICAL pole with bottom of 228 to 260 mm A/F, top 80 to 96 mm A/F on provided foundation as per specification No. OH-PL/PSC
Each
7585
915.29
8500.00
8-3-21 (New)
Each
9949
915.29
10864.00
8-3-22 (New)
Each
12642
915.29
13557.00
8-3-23 (New)
Each
15846
915.29
16761.00
8-3-24 (New)
Each
19213
1372.41
20585.00
8-3-25 (New)
Each
22467
1372.41
23839.00
8-3-26 (New)
Each
26515
1372.41
27887.00
Each
29484
1524.43
31008.00
Each
35939
1676.45
37615.00
Each
42172
1829.53
44002.00
8-4-2
Each
479
59.12
538.00
8-4-3
Each
350
59.12
409.00
8-4-4
Each
672
59.12
731.00
8-4-5
Each
280
59.12
339.00
8-4-6
Each
448
59.12
507.00
8-4-7
Each
347
59.12
406.00
8-4-8
Each
582
59.12
641.00
8-4-9
Each
605
59.12
664.00
8-4-10
Each
871
59.12
930.00
8-4-11
Each
1664
122.46
1786.00
Note :-
8-4-12
Supplying and erecting Vee cross arm for erecting Insulators with channel length of 45mm for base of insulator & vertical member of suitable length to maintain clearance of 1200 mm horizontally between two insulators with angle of 60 degree to horizontal and the total vertical height of V cross arm as 460mm, welded with MS flat of 80x10mm at centre of cross arm & MS clamp of 80x10 mm at bottom with clamps,nut bolts,washers complete as per specification No. OH-PL/VCA Supplying and erecting Vee cross arm for erecting Insulators with channel length of 45mm for base of insulator & vertical member of suitable length to maintain clearance of 1530 mm horizontally between two insulators with angle of 60 degree to horizontal and the total vertical height of V cross arm as 460mm, welded with MS flat of 80x10mm at centre of cross arm & MS clamp of 80x10 mm at bottom with clamps,nut bolts,washers complete as per specification No. OH-PL/VCA Supplying and erecting 75x40 mm with 4.4 mm thick web and 7.3 mm thick flange channel with clamp suitable for erection of 11/22 kV pin insulators complete as per specification No. OH-PL/VCA Supplying and erecting bracket for guarding, made from channel iron 1600 mm in length and 75x40 mm. with 4.4 mm. thick web and 7.3 mm thick flange erected on pole complete as per specification no. OH-PL/VCA Supplying and erecting bracket for guarding, made from channel iron 1600 mm in length and 65 x 65 x 6mm thick web and 7.3 mm thick flange erected on pole as per specification no. OH-PL/VCA All the brackets, cross arms are included with clamps, washers and nut bolts
Each
1029
122.46
1151.00
8-4-13
Each
1608
122.46
1730.00
8-4-14
Each
417
59.12
476.00
8-4-15
Each
804
59.12
863.00
8-4-16
Each
586
69.68
656.00
Note :-
Supplying and erecting porcelain post type insulator suitable for 11kV line, complete as per specification No. OH-INS/PST Supplying and erecting porcelain post type insulator suitable for 22kV line,complete as per specification No. OH-INS/PST Supplying and erecting porcelain post type insulator suitable for 33kV line, complete as per specification No. OH-INS/PST Supplying and erecting Distribution class, 11 kV thyrite type lightening arrester, on provided cross arm as per specification No. OH-INS/LA Supplying and erecting Distribution class, 22 kV thyrite type lightening arresters, on provided cross arm as per specification No. OH-INS/LA
8.7 Accessories
8-7-1 Supplying and erecting G.l. stay set for poles, including loop insulators at inaccessible height complete with anchor plate 300 x 300 x 6 mm., straining screws, G.l. stay wire 7/10 SWG, G.l. stay rod 20 mm x 1.8 m length and pole clamps duly erected in provided cement concrete foundation. Supplying and erecting G.l. stay set for poles, including loop insulators at inaccessible height complete with anchor plate 300 x 300 x 6 mm., straining screws, G.l. stay wire 7/8 SWG, G.l. stay rod 20 mm x 1.8 m length and pole clamps duly erected in provided cement concrete foundation. Supplying and erecting G.I. fly stay set for pole including straining screw, G.l. stay wire, 7/10 SWG (for to 15mtr. long) with pole clamp, made of 50 x 6 mm MS flat, complete erected on provided RSJ pole. (Add. Rs. 25/- per m for extra length beyond 15 m) Supplying and erecting G.l. self stay set for pole, including anchor plate 300x 300 x 6 mm. straining screw, loop-insulator, G.l. stay wire 7/10 SWG, G.l. stay rod 20 mm x 1.8 m long, erected with pole clamps along with angle iron bracket of 50 x 50 x 6 mm and one meter long fixed to pole at suitable height with suitable MS clamps duly erected in provided C.C. foundations. Supplying and erecting G.l. wall hook, 10 to 15 mm dia and overall length 250 mm including grouting, cement plastering etc. complete. Supplying and erecting pipe post made from ISI mark G.I. pipe 40 mm dia 3 m overall length, with two bends, fixed to pipe at the top & bottom, round bended, complete erected with MS flat welded MS bolts 15 cm long duly grouted in wall with necessary clamps, nuts and bolts etc. duly painted with two coats of aluminium paint complete. Supplying and erecting pipe post made from ISI mark G.I. pipe 25 mm dia 3 m overall length, with two bends, fixed to pipe at the top & bottom, round bended, complete erected with MS flat welded MS bolts 15 cm long duly grouted in wall with necessary clamps, nuts and bolts etc. duly painted with two coats of aluminium paint complete. Supplying and erecting guarding loop using G.l. wire No. 8 SWG for L.T. over head line of horizontal formation complete erected with 20 SWG G.l. wire as binding wire and 50 mm. section on each side, complete. Supplying and erecting fibre/ PVC spacers for L.T. overhead line 3 to 5 conductors complete erected. Supplying and erecting pole clamp made from 50 x 6 mm MS flat for pole or pipe, post complete erected with 15 mm bolts and nuts, complete duly painted with one coat of red oxide and two coats of aluminium paint. Supplying and erecting pole clamp made from 50 x 10 mm MS flat for pole or pipe, post complete erected with 15 mm bolts and nuts, complete duly painted with one coat of red oxide and two coats of aluminium paint. . Supplying and erecting D type pole clamps, fabricated from 50 x 6 mm MS flat with 15 mm dia. bolts and nut fixed to steel tubular pole duly painted with one coat of red oxide and two coats of aluminium paint. Supplying and erecting half clamps for pole made from 50 x 6 mm flat for fixing cross arms by means of 15 mm dia. bolts and nuts painted with one coat of red oxide and two coats of aluminium paint. Supplying and erecting half clamps for pole made from 50 x 10 mm flat for fixing cross arms by means of 15 mm dia. bolts and nuts painted with one coat of red oxide and two coats of aluminium paint. Supplying and fixing MS base plate 30x30x0.6 cm size fixed to the pole base either by welding or by set screws 12 mm. dia fixed at position. Supplying and fixing MS round base plate 25 cm dia meter and 10mm. thick fixed to pole by set screws or welded and fixed at position. Supplying and fixing MS pole cap fabricated from MS pipe or cast iron fixed to pole by means of set screws and 75 mm deep. Supplying and erecting guarding lace for H.T.O.H. line with 8 SWG G.l. wire to protect the H.T. over head line with binding wire of 20 SWG G.l. wire for 75 mm section on either side. Each 1227 172.08 1399.00
8-7-2
Each
1474
172.08
1646.00
8-7-3
Each
1110
257.59
1368.00
8-7-4
Each
1139
172.08
1311.00
8-7-5 8-7-6
Each Each
44 1128
15.84 85.51
60.00 1214.00
8-7-7
Each
845
85.51
931.00
8-7-8
Each
19
16.89
36.00
8-7-9 8-7-10
Each Each
51 104
16.89 24.28
68.00 128.00
8-7-11
Each
153
24.28
177.00
8-7-12
Each
104
24.28
128.00
8-7-13
Each
63
24.28
87.00
8-7-14
Each
100
24.28
124.00
291 100 89 22
8.8 Dismantling
8-8-1
8-8-2
8-8-3 8-8-4
Dismantling the existing pole up to 6 m height with brackets, clamps, insulators, stay from the cement concrete foundation and making the site clear by refilling the pits with excavated materials and bringing it to the ground level. Dismantling the existing pole above 6 m height with brackets, clamps, insulators, stay from the cement concrete foundation and making the site clear by refilling the pits with excavated materials and bringing it to the ground level. Dismantling the existing overhead line including G.I. wires of all sizes without damaging & making the coils in suitable sizes. Dismantling existing lightning arrestor set, insulator complete from DP structure in an approved manner
Each
395.89
396.00
Each
558.47
558.00
km job
0 0
801.28 59.12
801.00 59.00
9-1-2
Each
2805
357.88
3163.00
9-1-3
Each
1915
315.65
2231.00
9-1-4 9-1-5
Each
613
184.75
798.00
Each
13449
182.64
13632.00
Each
11993
640.81
12634.00
Note :-
9.2 Accessories
9-2-1 Supplying and erecting aluminium strip of required sizes used for earthing on wall and/or any other purpose with necessary aluminium clamps fixed on wall painted with bituminous paint in an approved manner with joints required. as per specification No (EA-EP). Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint in an approved manner with joints required. as per specification No (EA-EP). Supplying and erecting G.I. strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joint required. as per specification No (EA-EP). Supplying and erecting Annealed bare copper wire of high purity of different sizes used for earthing on wall with necessary copper clamps fixed on wall/cable/conduit with screws in an approved manner. Supplying and erecting G.l. earth wire 14 to 6 SWG complete erected on wall with necessary clamps in an approved manner for earthing or any other purposes with copper lugs cable sockets of 30A & more at each end with necessary cadmium plated double nut & bolts with washers & covering it with bituminous compound. Kg. 313 20.06 333.00
9-2-2
Kg.
598
20.06
618.00
9-2-3
Kg.
80
20.06
100.00
9-2-4
Kg.
548
57.01
605.00
9-2-5
Kg.
71
20.06
91.00
9-3-2 9-3-3
Note :-
Deleted Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation in an approved manner For small buildings (one / two storeyed in the hilly and lightning prone area conventional type lightning conductor of item no 9-3-2 shall only be used
Each
2296
184.75
2481.00
10-1-2
Each
191948
1789.41
193737.00
10-1-3
Each
273218
2270.81
275489.00
10-1-4
Each
311759
2270.81
314030.00
10-1-5
Each
360928
2270.81
363199.00
10-1-6
Each
447830
2270.81
450101.00
10-1-7
Each
607008
2270.81
609279.00
10-1-8
Supplying and Erecting approved make 630- kVA ,3 phase, 50 c/s Oil immersed and naturally cooled indoor / outdoor type, copper wound transformer with delta conn. on HV side & star connection on LV side with additional neutral brought out on load side, voltage rating 11 / 0.433kV with HV tapping of +/- 2.5% - 5 % continuously rated for full load with standard accessories complete with Test Certificate with losses below 1000 watts at no load, 7000 watts at full load as per IS 2026.) as per specification No SSTR. Supplying and Erecting approved make 63 kVA ,3 phase, 50 c/s Oil immersed and naturally cooled indoor / outdoor type, copper wound transformer with delta conn. on HV side & star connection on LV side with additional neutral brought out on load side, voltage rating 22 / 0.433kV with HV tapping of +/- 2.5% - 5 % continuously rated for full load with standard accessories complete with Test Certificate with losses 1193 watts at full load as per IS 2026.) as per specification No SS- TR. Supplying and Erecting approved make 100 kVA ,3 phase, 50 c/s Oil immersed and naturally cooled indoor / outdoor type, copper wound transformer with delta conn. on HV side & star connection on LV side with additional neutral brought out on load side, voltage rating 22 / 0.433kV with HV tapping of +/- 2.5% - 5 % continuously rated for full load with standard accessories complete with Test Certificate with losses 1717 watts at full load as per IS 2026.) as per specification No SS- TR. Supplying and Erecting approved make 160 kVA ,3 phase, 50 c/s Oil immersed and naturally cooled indoor / outdoor type, copper wound transformer with delta conn. on HV side & star connection on LV side with additional neutral brought out on load side, voltage rating 22 / 0.433kV with HV tapping of +/- 2.5% - 5 % continuously rated for full load with standard accessories complete with Test Certificate with losses, 1766 watts at full load as per IS 2026.) as per specification No SS- TR. Supplying and Erecting approved make 200 kVA ,3 phase, 50 c/s Oil immersed and naturally cooled indoor / outdoor type, copper wound transformer with delta conn. on HV side & star connection on LV side with additional neutral brought out on load side, voltage rating 22 / 0.433kV with HV tapping of +/- 2.5% - 5 % continuously rated for full load with standard accessories complete with Test Certificate with losses, 2160 watts at full load as per IS 2026.) as per specification No SS- TR. Supplying and Erecting approved make 250 kVA ,3 phase, 50 c/s Oil immersed and naturally cooled indoor / outdoor type, copper wound transformer with delta conn. on HV side & star connection on LV side with additional neutral brought out on load side, voltage rating 22 / 0.433kV with HV tapping of +/- 2.5% - 5 % continuously rated for full load with standard accessories complete with Test Certificate with losses , 2540 watts at full load as per IS 2026.) as per specification No SS- TR. Supplying and Erecting approved make 315kVA ,3 phase, 50 c/s Oil immersed and naturally cooled indoor / outdoor type, copper wound transformer with delta conn. on HV side & star connection on LV side with additional neutral brought out on load side, voltage rating 22 / 0.433kV with HV tapping of +/- 2.5% - 5 % continuously rated for full load with standard accessories complete with Test Certificate with losses , 3584 watts at full load as per IS 2026.) as per specification No SS- TR. Supplying and Erecting approved make 500kVA ,3 phase, 50 c/s Oil immersed and naturally cooled indoor / outdoor type, copper wound transformer with delta conn. on HV side & star connection on LV side with additional neutral brought out on load side, voltage rating 22 / 0.433kV with HV tapping of +/- 2.5% - 5 % continuously rated for full load with standard accessories complete with Test Certificate with losses , 4200 watts at full load as per IS 2026.) as per specification No SS- TR. Supplying and Erecting approved make 630 kVA ,3 phase, 50 c/s Oil immersed and naturally cooled indoor / outdoor type, copper wound transformer with delta conn. on HV side & star connection on LV side with additional neutral brought out on load side, voltage rating 22 / 0.433kV with HV tapping of +/- 2.5% - 5 % continuously rated for full load with standard accessories complete with Test Certificate with losses , 4990 watts at full load as per IS 2026.) as per specification No SS- TR. 1) For use of Transformer with aluminium winding for 63/100/200 kVA capacity. (To be used only for Licensee Job), Rates shall be reduced by 15 % from the material rates for Transformer with Copper winding. 2) For item No. 10-1-1 & 10-1-2 reduce the material rate by 5% for transformer without of load tap changer.
Each
707740
2270.81
710011.00
10-1-9
Each
167278
2270.81
169549.00
10-1-10
Each
117013
2270.81
119284.00
10-1-11
Each
306022
2270.81
308293.00
10-1-12
Each
357298
2270.81
359569.00
10-1-13
Each
410250
2270.81
412521.00
10-1-14
Each
495471
2270.81
497742.00
10-1-15
Each
676157
2270.81
678428.00
10-1-16
Each
745842
2270.81
748113.00
Note :-
10-1-17
Inspection of faulty distribution transformer 11kV / 22kV on HV side, 415 V on LV side upto 500 kVA capacity in workshop in presence of authority by opening top cover, disconnecting HV & LV studs, tap changer connections; taking out core along with winding for inspection and carrying out necessary tests on HV, LV side, oil, tap-changer etc. checking breather, body condition etc. and submitting inspection report, test reports (oil, insulation, resistance, ratio,etc.) and quotation for repairs, (excluding transportation) Hiring and maintaining distribution transformer 11kV / 22 kV on HV side 415 V on LV side up to 63 to 200 kVA Capacity. (Hiring for 10 days) Hiring and maintaining distribution transformer 11 kV / 22 kV on HV side 415 V on LV side up to 250 to 500 kVA Capacity. (Hiring for 10 days) Hiring and maintaining distribution transformer 11/ 22 kV on HV side 415 V on LV side upto 500 kVA capacity after commissioning. (for subsequent 5 days and part thereof.) 1)Hiring and maintaining distribution transformer 11/22 kV includes keeping it in working condition with required tools and plant, labour etc 2) The above rates for item no 10-1-18 to 10-1-20 are to be implemented whenever there is a transformer required in lieu of faulty transformer and transportation, erection, testing etc are to be considered separately Erecting 11kV / 22 kV on HV side 415 V on LV side up to 500 kVA capacity hired/provided transformer on existing plinth / DP structure, making connections on HV & LV side in approved manner, carrying out necessary tests before and after charging upto full load to satisfaction.(including transportation) Supplying and erecting approved make out door type oil immersed aluminium wound 6350/250v 15 KVA SINGLE PHASE transformer confirming to I.S. 2026 specification complete with 5 % continuously rated for full load with standard accessories complete with Test Certificate with with first filling of oil having Vector Group- DYN-11 & first filling of silica gel, as per specification No SS- TR Supplying and erecting approved make out door type oil immersed aluminium wound 6350/250v 25 KVA SINGLE PHASE transformer confirming to I.S. 2026 specification complete with 5 % continuously rated for full load with standard accessories complete with Test Certificate with with first filling of oil having Vector Group- DYN-11 & first filling of silica gel, as per specification No SS- TR Supplying and Erecting BEE approved make Star Rated (3 STAR) 63 kVA ,3 phase, 50 c/s Oil immersed and naturally cooled indoor / outdoor type, copper wound transformer with delta connected. on HV side & star connection on LV side with additional neutral brought out on load side, voltage rating 11/ 0.433 kV with HV tapping of +/- 2.5% - 5 % continuously rated for full load with standard accessories complete with Test Certificate with losses below 380 watts at 50 % loading and 1250 Watt at 100 % Loading as per IS 1180 ( Part 1 ) as per specification No SS- TR.-(STAR) Supplying and Erecting BEE approved make Star Rated (3 STAR) 100 kVA ,3 phase, 50 c/s Oil immersed and naturally cooled indoor / outdoor type, copper wound transformer with delta conn. on HV side & star connection on LV side with additional neutral brought out on load side, voltage rating 11/ 0.433 kV with HV tapping of +/- 2.5% - 5 % continuously rated for full load with standard accessories complete with Test Certificate with losses below 520 watts at 50 % loading and 1800 Watt at 100 % Loading as per IS 1180 ( Part 1 ) as per specification No SS- TR.-(STAR) Supplying and Erecting BEE approved make Star Rated (3 STAR) 160kVA ,3 phase, 50 c/s Oil immersed and naturally cooled indoor / outdoor type, copper wound transformer with delta conn. on HV side & star connection on LV side with additional neutral brought out on load side, voltage rating 11 / 0.433kV with HV tapping of +/- 2.5% - 5 % continuously rated for full load with standard accessories complete with Test Certificate with losses below 770 watts at 50 % loading and 2200 Watt at 100 % Loading as per IS 1180 ( Part 1 ) as per specification No SS- TR.-(STAR) Supplying and Erecting BEE approved make Star Rated (3 STAR) 200kVA ,3 phase, 50 c/s Oil immersed and naturally cooled indoor / outdoor type, copper wound transformer with delta conn. on HV side & star connection on LV side with additional neutral brought out on load side, voltage rating 11/ 0.433kV with HV tapping of +/- 2.5% - 5 % continuously rated for full load with standard accessories complete with Test Certificate with losses below 890 watts at 50 % loading and 2700 Watt at 100 % Loading as per IS 1180 ( Part 1 ) as per specification No SS- TR.-(STAR)
Job
2238.08
2238.00
0 0 472
13462.29 24230.43 0
Note :-
10-1-21
Job
8555
1394.58
9950.00
10-1-22 (New)
59082
1266.84
60349.00
10-1-23 (New)
75144
1266.84
76411.00
10-1-24 (New)
208098
1907.65
210006.00
10-1-25 (New)
263109
1907.65
265017.00
10-1-26 (New)
378732
2383.77
381116.00
10-1-27 (New)
404383
2383.77
406767.00
10.2 Accessories
10-2-1
Supplying and erecting approved make 11 kV out door type gang operated air break, triple pole switch 200A, capacity with 3 post pin type insulator per phase, mounted in horizontal or vertical position with necessary channels on provided cross arm with adequate length of "C" class G.l. pipe for operating handle erected on extended square shaft. The operating handle provided with lock and key at suitable height from ground level with necessary clamp. Supplying and erecting approved make 11 kV out door type gang operated air break, triple pole switch 400A, capacity with 3 post pin type insulator per phase, mounted in horizontal or vertical position with necessary channels on provided cross arm with adequate length of "C" class G.l. pipe for operating handle erected on extended square shaft. The operating handle provided with lock and key at suitable height from ground level with necessary clamp. Supplying and erecting approved make 22 kV out door type gang operated air break, triple pole switch 200A, capacity with 3 post pin type insulator per phase, mounted in horizontal or vertical position with necessary channels on provided cross arm with adequate length of "C" class G.l. pipe for operating handle erected on extended square shaft. The operating handle provided with lock and key at suitable height from ground level with necessary clamp. Supplying and erecting approved make 33 kV out door type gang operated air break, triple pole switch 200A, capacity with 3 post pin type insulator double stack per phase, mounted in horizontal position with necessary channels on provided cross arm with adequate length of "C" class G.l. pipe for operating handle erected on extended square shaft. The operating handle provided with lock and key at suitable height from ground level with necessary clamp. Supplying and erecting approved make, 11 kV out door type drop out fuse with insulator complete with fuse holders, fuse barrel with metal fitting, fuse element mounted on M.S. channel with working current of 15 Amps capacity complete erected on provided cross arm. Supplying and erecting approved make, 22 kV out door type drop out fuse with insulator complete with fuse holders, fuse barrel with metal fitting, fuse element mounted on M.S. channel with working current of 15 Amps capacity complete erected on provided cross arm. Supplying and erecting approved make, 33 kV out door type drop out fuse with insulator complete with fuse holders, fuse barrel with metal fitting, fuse element mounted on M.S. channel with working current of 15 Amps capacity complete erected on provided cross arm. Supplying and erecting 11 kV fuse barrel with metal fittings. Supplying and erecting 22 kV fuse barrel with metal fittings. Supplying and erecting hard drawn copper solid wire No.0 to 6 SWG complete erected for connections on H.T. sides. Supplying and erecting extra thick alkathene pipe 10mm. dia erected to enclose bare conductor wires. (use shall be restricted to H.T.) Supplying operating rod, suitable for 11/22kV supply with clamps for removing drop out fuses at 6 meters length, 4 pieces each with rain shade with hand grip including earthing chain 1.5 m (Light duty) Supplying Heavy duty operating rod, Outer Dia 25 mm & inner dia 20 mm suitable for 11 kV with brass couplings etc for removing drop out fuses at 6 meters length, 4 pieces each with rain shade with hand grip including earthing chain 1.5 m Supplying Heavy duty operating rod, Outer Dia 25 mm & inner dia 20 mm suitable for 22/33 kV with brass couplings etc for removing drop out fuses at 6 m length, 4 pieces each with rain shade with hand grip including earthing chain 1.5 m Supplying and erecting copper tubular bus 20mm. dia 1.6 mm (16 SWG) thick for the use of high tension over head bus and erected on provided HT insulators with clamps, nuts and bolts complete. (weight per meter of bus is about 1.7 kg.) Supplying and erecting clamps, made out of 25x3mm, copper strips to be fixed to tubular bus for connecting the bare copper wire to other equipment, with brass nuts bolts of suitable dia. Supplying and erecting anticlimbing devices, fabricated from pole clamps of MS Flat 40x5 mm, with drooping spikes 15 cm. in length, welded to it and erected on pole. Supplying and erecting fencing of section having size 2450 mm in height from ground level and 1200 mm width with angle iron frame work erected in foundation and painted as per specification No SS-AS/FSG For Section less than 1200 mm width, reduce rate by Rs 120/- per 100 mm or part thereof for reduction in width of 1200 mm. Supplying and erecting 50 x 50 x 6 mm. angle iron as corner support 0.5 m away from the fence support fixed at the middle of the fencing frame and the other side in C.C. foundation of 15 x 15 x 40 cm. complete duly painted with one coat of red oxide and two coats aluminum paint.
Set.
15685
604.92
16290.00
10-2-2
Set.
17645
767.49
18412.00
10-2-3
Set.
24934
767.49
25701.00
10-2-4
Set.
34184
767.49
34951.00
10-2-5
Set.
8204
526.79
8731.00
10-2-6
Set.
14093
526.79
14620.00
10-2-7
Set.
19304
526.79
19831.00
10-2-13
Each
3476
3476.00
10-2-14
Each
4122
4122.00
10-2-15
Mtr.
969
25.34
994.00
10-2-16
Each
97
25.34
122.00
10-2-17
Each
77
25.34
102.00
10-2-18
Each
2306
197.42
2503.00
Note :10-2-19
Each
854
99.24
953.00
10-2-20
10-2-21
10-2-25
10-2-26
10-2-27
10-2-31
10-2-32
Note :-
10-2-33
10-2-34
10-2-35
10-2-36
10-2-37
10-2-38
Supplying and erecting double leaf hinged door each 1500mm in width x 1850 mm in height using B class ,GI pipe with angle iron supports, chain link wiremesh (jali) complete supported on channel iron, erected in foundation, and painted as per specification no SS-AS/DLD Supplying & erecting barbed wire two ply with 12 SWG ply and 12 SWG barb with a gap between two bars of 75 mm. firmly fixed on provided angle supports with necessary materials. (6.044 meters/kg.). Providing printed instruction chart for treating persons suffering from electric shock, printed in English & Marathi and duly laminated. Provided pair of duly tested rubber hand gloves as per IS :340715 suitable for working on 22kV supply. Providing round bottom FIRE Bucket of 9 Litres capacity as per IS : 2546 made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and red outside with FIRE Mark, on provided stand/ wall hook. Providing floor mounting stand for keeping 4 Nos. of FIRE buckets 1500mm in length, 900mm in height frame made out of 30x30x4 mm. angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of silver paint. Supplying and erecting Wall hook 225mm projection for keeping fire buckets made out of 15 mm. dia. M.S. Rod grouted in wall to a depth of minimum 15cms. Supplying standard first aid box with necessary antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-aid) adhesive tape for medicinal use, scissors, anti-septic solution (Savlon or similar) etc. (All above contents shall be of standard makes) Supplying rubber matting of 6 mm thickness as per IS : 5424 and of required length and breadth with good insulation property for 22 kV. Supplying rubber matting of 12 mm. thickness as per IS : 5424 and of required length and breadth with good insulation property for 22 kV. Supplying and fixing PVC Synthetic elastomer electrically insulating mat with class A insulation conforming to IS: 15652 2006 having 2 mm thickness upto 3.3 kV Supplying and fixing PVC Synthetic elastomer electrically insulating mat with class B insulation conforming to IS: 15652 2006 having 2.5 mm thickness upto 11 kV Supplying and fixing PVC Synthetic elastomer electrically insulating mat with class C insulation conforming to IS: 15652 2006 having 3mm thickness upto 33 kV As old IS No 5424 -1969 is superseded by IS no 15652-2006 , hence the use of rubber matting ( Item No 10-2-28, 10-2-29 ) should be discontinued in new erection. Supplying shock proof leather Safety Shoes of Electrical grade of standard size as IS :11226, 14544 duly tested, with necessary test certificate from manufacturer. Supplying and erecting D.C.P. type Fire Extinguisher 5 kg capacity cartridge type with Gun Metal cap 150 gram CO2 gas cartridge, powder and brackets conforming to IS 2171-1985 and complete erected with necessary clamps made from 50x6 mm M.S. flat with nuts & bolts grouted in wall complete. Supplying and erecting D.C.P. type Fire Extinguisher 10 kg capacity cartridge type with Gun Metal cap 150 gram CO2 gas cartridge, powder and brackets conforming to IS 2171-1985 and complete erected with necessary clamps made from 50x6 mm M.S. flat with nuts & bolts grouted in wall complete. Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. Capacity Cartridge type conf. To IS 2878 Complete erected with necessary clamp made front 50x6 mm. M. S. flat with nut & bolts grouted in wall complete. Supplying & erecting Carbon Dioxide ( CO2 ) fire extinguisher of 5.5 / 6.5 kg. Capacity Cartridge type conf. To IS 2878 Complete erected with necessary clamp made front 50x6 mm. M. S. flat with nut & bolts grouted in wall complete. Supplying and erecting ABC powder type 'Ceasefire' type fire extinguisher as per IS : 13849 of 1 kg capacity with necessary clamp for erection on wall.
Each
7445
396.94
7842.00
Kg.
76
5.28
81.00
60 435 402
9.5 0 0
Each
1773
71.79
1845.00
Each
40
9.5
50.00
Each
323
323.00
0 0 315.65
Sqm.
4357
315.65
4673.00
Sqm.
6033
315.65
6349.00
1341.00
48.56
2417.00
Each
3340
48.56
3389.00
Each
8434
48.56
8483.00
Each
11057
48.56
11106.00
Each
1709
1709.00
10.3 Dismantling
10-3-1 Dismantling the existing Distribution Transformer of any capacity from the plinth / foundation safely without any damages and storing in safe place. Dismantling existing pole mounted Distribution Transformer safely without any damages and storing it in safe place. Transportation should be given separately as on actual basis for item no 10.3.1 & 10.3.2 KVA 0 20.06 20.00
10-3-2 Note :-
kVA
30.62
31.00
10-3-3 Note :-
Dismantling existing DO / AB switch set complete from D.P. structure in an approved manner. The rate for item no 10.3.3 are for dismantling and handing over to section office inclusive of transportation upto 25 km, between site and section office.
Set.
197.42
197.00
11-1-2
Each
48836
48836.00
Note :11-1-3
Each
366050
2732.15
368782.00
11-1-4
Each
407654
3697.06
411351.00
11-1-5
Each
485526
3697.06
489223.00
11-1-6
11-1-7
11-1-8
11-1-9
11-1-10
Supplying, Erecting and Commissioning of Diesel generating set with AMF Panel with alternator of 25 kVA output continuous rating, 3 Phase, 415V, 50c/s 0.8 p. f. A.C a totally enclosed air cooled / water cooled multy cylinder diesel enginedeveloping suitable BHP at 1500 rpm with 10% overload for 1 hour in 24 hours with standard accessories, self excited self regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-1968 with voltage regulation +/- 5 % .Both the engine and alternator direct coupled on a common fabricated steel base plate with anti vibratring pad with control panel comprising of standard meters,switchgears, indicators connected with suitable wires/cables.The complete set enclosed in Acoustic enclosure made of 18 SWG CRCA Sheet, sound absorbing material,Rockwool covered from inside with mm holes perforated sheet to restrict sound level upto 75 dB at 1.0 m.The engine with first filling of oil,diesel etc.obtaining necessary approval from Electrical Inspector as per specification no GEN-DG Supplying, Erecting and Commissioning of Diesel generating set with AMF Panel with alternator of 30 kVA output continuous rating, 3 Phase, 415V, 50c/s 0.8 p. f. A.C a totally enclosed air cooled / water cooled multy cylinder diesel enginedeveloping suitable BHP at 1500 rpm with 10% overload for 1 hour in 24 hours with standard accessories, self excited self regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-1968 with voltage regulation +/- 5 % .Both the engine and alternator direct coupled on a common fabricated steel base plate with anti vibratring pad with control panel comprising of standard meters,switchgears, indicators connected with suitable wires/cables.The complete set enclosed in Acoustic enclosure made of 18 SWG CRCA Sheet, sound absorbing material,Rockwool covered from inside with mm holes perforated sheet to restrict sound level upto 75 dB at 1.0 m.The engine with first filling of oil,diesel etc.obtaining necessary approval from Electrical Inspector as per specification no GEN-DG Supplying, Erecting and Commissioning of Diesel generating set with AMF Panel with alternator of 40 kVA output continuous rating, 3 Phase, 415V, 50c/s 0.8 p. f. A.C a totally enclosed air cooled / water cooled multy cylinder diesel enginedeveloping suitable BHP at 1500 rpm with 10% overload for 1 hour in 24 hours with standard accessories, self excited self regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-1968 with voltage regulation +/- 5 % .Both the engine and alternator direct coupled on a common fabricated steel base plate with anti vibratring pad with control panel comprising of standard meters,switchgears, indicators connected with suitable wires/cables.The complete set enclosed in Acoustic enclosure made of 18 SWG CRCA Sheet, sound absorbing material,Rockwool covered from inside with mm holes perforated sheet to restrict sound level upto 75 dB at 1.0 m The engine with first filling of oil,diesel etc.obtaining necessary approval from Electrical Inspector as per specification no GEN-DG Supplying, Erecting and Commissioning of Diesel generating set with AMF Panel with alternator of 50 kVA output continuous rating, 3 Phase, 415V, 50c/s 0.8 p. f. A.C a totally enclosed air cooled / water cooled multy cylinder diesel enginedeveloping suitable BHP at 1500 rpm with 10% overload for 1 hour in 24 hours with standard accessories, self excited self regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-1968 with voltage regulation +/- 5 % .Both the engine and alternator direct coupled on a common fabricated steel base plate with anti vibratring pad with control panel comprising of standard meters,switchgears, indicators connected with suitable wires/cables.The complete set enclosed in Acoustic enclosure made of 18 SWG CRCA Sheet, sound absorbing material,Rockwool covered from inside with mm holes perforated sheet to restrict sound level upto 75 dB at 1.0 m The engine with first filling of oil,diesel etc.obtaining necessary approval from Electrical Inspector as per specification no GEN-DG Supplying, Erecting and Commissioning of Diesel generating set with AMF Panel with alternator of 62.5 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C a totally enclosed air cooled / water cooled multy cylinder diesel enginedeveloping suitable BHP at 1500 rpm with 10% overload for 1 hour in 24 hours with standard accessories, self excited self regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-1968 with voltage regulation +/- 5 % .Both the engine and alternator direct coupled on a common fabricated steel base plate with anti vibratring pad with control panel comprising of standard meters,switchgears, indicators connected with suitable wires/cables.The complete set enclosed in Acoustic enclosure made of 18 SWG CRCA Sheet, sound absorbing material,Rockwool covered from inside with mm holes perforated sheet to restrict sound level upto 75 dB at 1.0 m.The engine with first filling of oil,diesel etc.obtaining necessary approval from Electrical Inspector as per specification no. GEN-DG
Each
525127
3697.06
528824.00
Each
574873
3697.06
578570.00
Each
652400
4436.05
656836.00
Each
774108
4436.05
778544.00
Each
792281
4436.05
796717.00
11-1-11
Supplying, Erecting and Commissioning of Diesel generating setwith AMF Panel with alternator of 75 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C a totally enclosed water cooled multy cylinder diesel enginedeveloping suitable BHP at 1500 rpm with 10% overload for 1 hour in 24 hours with standard accessories, self excited self regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-1968 with voltage regulation +/- 5 % .Both the engine and alternator direct coupled on a common fabricated steel base plate with anti vibratring pad with control panel comprising of standard meters,switchgears, indicators connected with suitable wires/cables.The complete set enclosed in Acoustic enclosure made of 18 SWG CRCA Sheet, sound absorbing material,Rockwool covered from inside with mm holes perforated sheet to restrict sound level upto 75 dB at 1.0 mtr.The engine with first filling of oil,diesel etc.obtaining necessary approval from Electrical Inspector as per specification no. GEN-DG Supplying, Erecting and Commissioning of Diesel generating set with AMF Panel and with alternator of 82.5 kVA output continuous rating, 3 Phase, 415V, 50c/s 0.8 p. f. A.C a totally enclosed water cooled multy cylinder diesel enginedeveloping suitable BHP at 1500 rpm with 10% overload for 1 hour in 24 hours with standard accessories, self excited self regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-1968 with voltage regulation +/- 5 % .Both the engine and alternator direct coupled on a common fabricated steel base plate with anti vibratring pad with control panel comprising of standard meters,switchgears, indicators connected with suitable wires/cables.The complete set enclosed in Acoustic enclosure made of 18 SWG CRCA Sheet, sound absorbing material,Rockwool covered from inside with mm holes perforated sheet to restrict sound level upto 75 dB at 1.0 mtr.The engine with first filling of oil,diesel etc.obtaining necessary approval from Electrical Inspector as per specification no. GEN-DG Supplying, Erecting and Commissioning of Diesel generating set with AMF Panel with alternator of 100 kVA output continuous rating, 3 Phase, 415V, 50c/s 0.8 p. f. A.C a totally enclosed water cooled multy cylinder diesel enginedeveloping suitable BHP at 1500 rpm with 10% overload for 1 hour in 24 hours with standard accessories, self excited self regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-1968 with voltage regulation +/- 5 % .Both the engine and alternator direct coupled on a common fabricated steel base plate with anti vibratring pad with control panel comprising of standard meters,switchgears, indicators connected with suitable wires/cables.The complete set enclosed in Acoustic enclosure made of 18 SWG CRCA Sheet, sound absorbing material,Rockwool covered from inside with mm holes perforated sheet to restrict sound level upto 75 dB at 1.0 mtr.The engine with first filling of oil,diesel etc.obtaining necessary approval from Electrical Inspector as per specification no. GEN-DG Supplying, Erecting and Commissioning of Diesel generating set with AMF Panelwith alternator of 125 kVA output continuous rating, 3 Phase, 415V, 50c/s 0.8 p. f. A.C a totally enclosed water cooled multy cylinder diesel enginedeveloping suitable BHP at 1500 rpm with 10% overload for 1 hour in 24 hours with standard accessories, self excited self regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-1968 with voltage regulation +/- 5 % .Both the engine and alternator direct coupled on a common fabricated steel base plate with anti vibratring pad with control panel comprising of standard meters,switchgears, indicators connected with suitable wires/cables.The complete set enclosed in Acoustic enclosure made of 18 SWG CRCA Sheet, sound absorbing material,Rockwool covered from inside with mm holes perforated sheet to restrict sound level upto 75 dB at 1.0 mtr.The engine with first filling of oil,diesel etc.obtaining necessary approval from Electrical Inspector as per specification no. GEN-DG Supplying, Erecting and Commissioning of Diesel generating set with AMF Panel with alternator of 140 kVA output continuous rating, 3 Phase, 415V, 50c/s 0.8 p. f. A.C a totally enclosed water cooled multy cylinder diesel enginedeveloping suitable BHP at 1500 rpm with 10% overload for 1 hour in 24 hours with standard accessories, self excited self regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-1968 with voltage regulation +/- 5 % .Both the engine and alternator direct coupled on a common fabricated steel base plate with anti vibratring pad with control panel comprising of standard meters,switchgears, indicators connected with suitable wires/cables.The complete set enclosed in Acoustic enclosure made of 18 SWG CRCA Sheet, sound absorbing material,Rockwool covered from inside with mm holes perforated sheet to restrict sound level upto 75 dB at 1.0 mtr.The engine with first filling of oil,diesel etc.obtaining necessary approval from Electrical Inspector as per specification no. GEN-DG
Each
801277
6269.8
807547.00
11-1-12
Each
879828
6269.8
886098.00
11-1-13
Each
1002143
7521.86
1009665.00
11-1-14
Each
1066106
7521.86
1073628.00
11-1-15
Each
1287637
7521.86
1295159.00
11-1-16
Supplying, Erecting and Commissioning of Diesel generating set with AMF Panel with alternator of 160 kVA output continuous rating, 3 Phase, 415V, 50c/s 0.8 p. f. A.C a totally enclosed water cooled multy cylinder diesel enginedeveloping suitable BHP at 1500 rpm with 10% overload for 1 hour in 24 hours with standard accessories, self excited self regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-1968 with voltage regulation +/- 5 % .Both the engine and alternator direct coupled on a common fabricated steel base plate with anti vibratring pad with control panel comprising of standard meters,switchgears, indicators connected with suitable wires/cables.The complete set enclosed in Acoustic enclosure made of 18 SWG CRCA Sheet, sound absorbing material,Rockwool covered from inside with mm holes perforated sheet to restrict sound level upto 75 dB at 1.0 mtr.The engine with first filling of oil,diesel etc.obtaining necessary approval from Electrical Inspector as per specification no. GEN-DG Supplying, Erecting and Commissioning of Diesel generating set with AMF Panel with alternator of 180 kVA output continuous rating, 3 Phase, 415V, 50c/s 0.8 p. f. A.C a totally enclosed water cooled multy cylinder diesel enginedeveloping suitable BHP at 1500 rpm with 10% overload for 1 hour in 24 hours with standard accessories, self excited self regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-1968 with voltage regulation +/- 5 % .Both the engine and alternator direct coupled on a common fabricated steel base plate with anti vibratring pad with control panel comprising of standard meters,switchgears, indicators connected with suitable wires/cables.The complete set enclosed in Acoustic enclosure made of 18 SWG CRCA Sheet, sound absorbing material,Rockwool covered from inside with mm holes perforated sheet to restrict sound level upto 75 dB at 1.0 mtr.The engine with first filling of oil,diesel etc.obtaining necessary approval from Electrical Inspector as per specification no. GEN-DG Supplying, Erecting and Commissioning of Diesel generating set with AMF Panel with alternator of 200 kVA output continuous rating, 3 Phase, 415V, 50c/s 0.8 p. f. A.C a totally enclosed water cooled multy cylinder diesel enginedeveloping suitable BHP at 1500 rpm with 10% overload for 1 hour in 24 hours with standard accessories, self excited self regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-1968 with voltage regulation +/- 5 % .Both the engine and alternator direct coupled on a common fabricated steel base plate with anti vibratring pad with control panel comprising of standard meters,switchgears, indicators connected with suitable wires/cables.The complete set enclosed in Acoustic enclosure made of 18 SWG CRCA Sheet, sound absorbing material,Rockwool covered from inside with mm holes perforated sheet to restrict sound level upto 75 dB at 1.0 mtr.The engine with first filling of oil,diesel etc.obtaining necessary approval from Electrical Inspector as per specification no. GEN-DG Supplying, Erecting and Commissioning of Diesel generating setwith AMF Panel with alternator of 250 kVA output continuous rating, 3 Phase, 415V, 50c/s 0.8 p. f. A.C a totally enclosed water cooled multy cylinder diesel enginedeveloping suitable BHP at 1500 rpm with 10% overload for 1 hour in 24 hours with standard accessories, self excited self regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-1968 with voltage regulation +/- 5 % .Both the engine and alternator direct coupled on a common fabricated steel base plate with anti vibratring pad with control panel comprising of standard meters,switchgears, indicators connected with suitable wires/cables.The complete set enclosed in Acoustic enclosure made of 18 SWG CRCA Sheet, sound absorbing material,Rockwool covered from inside with mm holes perforated sheet to restrict sound level upto 75 dB at 1.0 mtr.The engine with first filling of oil,diesel etc.obtaining necessary approval from Electrical Inspector as per specification no. GEN-DG Supplying, Erecting and Commissioning of Diesel generating set with AMF Panel with alternator of 5 kVA output continuous rating, single Phase, 230V, 50c/s 0.8 p. f. A.C a totally enclosed air cooled multy cylinder diesel enginedeveloping suitable BHP at 1500 rpm with 10% overload for 1 hour in 24 hours with standard accessories, self excited self regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-1968 with voltage regulation +/- 5 % .Both the engine and alternator direct coupled on a common fabricated steel base plate with anti vibratring pad with control panel comprising of standard meters,switchgears, indicators connected with suitable wires/cables.The complete set enclosed in Acoustic enclosure made of 18 SWG CRCA Sheet, sound absorbing material,Rockwool covered from inside with mm holes perforated sheet to restrict sound level upto 75 dB at 1.0 mtr.The engine with first filling of oil,diesel etc.obtaining necessary approval from Electrical Inspector as per specification no. GEN-DG
Each
1394372
8357.98
1402730.00
11-1-17
Each
1569689
9242.65
1578932.00
11-1-18
Each
1691973
9242.65
1701216.00
11-1-19
Each
2113010
9242.65
2122253.00
11-1-20
Each
357148
2380.6
359529.00
11-1-21
Supplying, Erecting and Commissioning of Diesel generating set with AMF Panel with alternator of 10 kVA output continuous rating, single Phase, 230V, 50c/s 0.8 p. f. A.C a totally enclosed air cooled multy cylinder diesel enginedeveloping suitable BHP at 1500 rpm with 10% overload for 1 hour in 24 hours with standard accessories, self excited self regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-1968 with voltage regulation +/- 5 % .Both the engine and alternator direct coupled on a common fabricated steel base plate with anti vibratring pad with control panel comprising of standard meters,switchgears, indicators connected with suitable wires/cables.The complete set enclosed in Acoustic enclosure made of 18 SWG CRCA Sheet, sound absorbing material,Rockwool covered from inside with mm holes perforated sheet to restrict sound level upto 75 dB at 1.0 mtr.The engine with first filling of oil,diesel etc.obtaining necessary approval from Electrical Inspector as per specification no. GEN-DG 1) DG Set rating for altitudes more than 150 m above mean sea level shall be derated at 3.5 % for every 300 m above 150 m mean sea level.
Each
396582
2732.15
399314.00
12-1-2
Each
8719
184.75
8904.00
12-1-3
Each
10920
184.75
11105.00
12-1-4
Each
12160
184.75
12345.00
12-1-5
Each
13536
396.94
13933.00
12-1-6
Each
17376
396.94
17773.00
12-1-7
Each
17376
396.94
17773.00
12-1-8
Each
17376
396.94
17773.00
12-1-9
Each
22171
396.94
22568.00
12-1-10
Each
22137
396.94
22534.00
12-1-11
Each
26207
978.63
27186.00
12-1-12
Each
33829
1041.98
34871.00
12-1-13
Supplying and erecting ISI mark Centrifugal water pump (Monoblock), 415V, three phase 50 cycles A.C.supply of 12.5 HP with discharge of 7/ 19.6 discharge/Liters per second (LPS) for head of 20 / 48 mtrs and 80 mm suction/ 65 mm delivery pipe of size or with discharge 20 / 33.5 Liters per second (LPS) for head of 18 / 30 m and 100 mm suction/ 100 mm delivery pipe of size,on provided c c foundation as per specification No. WP-CGP Supplying and erecting ISI mark Centrifugal water pump (Monoblock),415 V, three phase 50 cycles A.C.supply of 15 HP with discharge 10.5 /19.4 Liters per second (LPS) for head of 30 / 54 m and 80 mm suction/ 65 mm delivery pipe of size or with discharge of 17.5 / 36.8 Liters per second (LPS) for head of 18 / 36 m and 100 mm suction/ 100 mm delivery pipe of size, on provided c c foundation as per specification No. WPCGP
Each
39915
1041.98
40957.00
12-1-14
Each
44795
1104.26
45899.00
12-1-15
Supplying and erecting ISI mark Centrifugal water pump (Monoblock) 415 V, three phase 50 cycles A.C.supply of 20 HP with discharge of 14 / 33.8 Liters per second (LPS) for head of 18 / 52 m and 100 mm suction/ 80 mm delivery pipe of size on provided c c foundation as per specification No. WP-CGP 1) Preferably energy efficient motors with p.f above 0.9 shall be used.
Each
63528
1104.26
64632.00
Note :-
12-2-1 12-2-2
12.2 Ejecto type Water Pump (EJP) Deleted Supplying and erecting ejecto type water pump 3 phase 2 H.P. multistaged with brass venturi and having suction pipe 40 mm. dia., pressure pipe 32 mm. dia. and delivery pipe 32 mm. dia. with discharge capacity 22/16 LPM for 48/60 m suction head respectively with maximum discharge head of 18 metre complete erected as per specification No. WPEJP Supplying and erecting ejecto type water pump 3 phase 1.5 H.P. multistaged with brass venturi and having suction pipe 40 mm. dia., pressure pipe 32 mm. dia. and delivery pipe 32 mm. dia. with discharge capacity 23/15 LPM for 39/51 m suction head respectively with maximum discharge head of 15 metre complete erected as per specification No. WPEJP Supplying and erecting ejecto type water pump single phase 1.5 H.P. multistaged with brass venturi and having suction pipe 40 mm. dia., pressure pipe 32 mm. dia. and delivery pipe 32 mm. dia. with discharge capacity 23/15 LPM for 39/51 m suction head respectively with maximum discharge head of 15 metre complete erected as per specification no. WPEJP 1) Preferably energy efficient motors with p.f above 0.9 shall be used. 2)For additional depth of each 3 mtrs or part thereof add Rs.50/- per 3 meter, in the rates of item no. 12-2-7
Each
19807
1749.29
21556.00
12-2-3
Each
13521
1749.29
15270.00
12-2-4
Each
14625
1749.29
16374.00
Note :-
12-3-2
Each
28700
1749.29
30449.00
12-3-3
Each
26426
1749.29
28175.00
12-3-4
Each
24490
1749.29
26239.00
12-3-5
Each
25569
1749.29
27318.00
12-3-6
12-3-7
12-3-8
12-3-9
12-3-10
12-3-11
12-3-12
12-3-13
12-3-14
12-3-15
Supplying and erecting submersible pumpset of required HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell, suitable for 70 to 250 LPM discharge at 65 to 36 mtr head & (max efficiency at 57 mtr head & 160 Ipm discharge & delivery pipe of necessary diameterwith a necessary H. type clamp. As per specification No. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell, suitable for 250 to 700 LPM discharge at 33 to 15 m head & (max efficiency at 24 m head & 500 Ipm discharge & delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell, suitable for 400 to 900 LPM discharge at 20 to 12 m head & (max efficiency at 16 m head & 700 Ipm discharge & delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell, suitable for 20 to 80 LPM discharge at 129 to 59 m head & (max efficiency at 95 m head & 50 Ipm discharge & delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell, suitable for 70 to 250 LPM discharge at 87 to 48 m head & (max efficiency at 76 m head & 160 Ipm discharge & delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell, suitable for 60 to 175 LPM discharge at 97 to 56 m head & (max efficiency at 79 m head & 125 Ipm discharge &delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell, suitable for 100 to 350 LPM discharge at 56 to 30 m head & (max efficiency at 47 m head & 250 Ipm discharge &delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell, suitable for 200 to 500 LPM discharge at 42 to 22 m head & (max efficiency at 34 m head & 350 Ipm discharge & delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell, suitable for 300 to 850 LPM discharge at 33 to 10 m head & (max efficiency at 24 m head & 600 Ipm discharge & delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell, suitable for 300 to 850 LPM discharge at 33 to 10 mtr head & (max efficiency at 33 mtr head & 600 Ipm discharge & necessary diameter delivery pipe line with a necessary H. type clamp. As per specification no. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell, suitable for 100 to 350 LPM discharge at 67 to 36 m head & (max efficiency at 57 m head & 250 Ipm discharge & delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell, suitable for 60 to 175 LPM discharge at 113 to 66 m head & (max efficiency at 92 m head & 125 Ipm discharge &delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell, suitable for 200 to 500 LPM discharge at 52 to 28 m head & (max efficiency at 42 m head & 350 Ipm discharge &delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell, suitable for 250 to 700 LPM discharge at 44 to 20 m head & (max efficiency at 32 m head & 500 Ipm discharge & delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell, suitable for 20 to 80 LPM discharge at 184 to 84 m head & (max efficiency at 136 m head & 50 Ipm discharge & delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. WP-SMP
Each
26874
1749.29
28623.00
Each
30601
1749.29
32350.00
Each
28588
1749.29
30337.00
Each
31648
2995.02
34643.00
Each
26328
2995.02
29323.00
Each
32579
2995.02
35574.00
Each
27920
2995.02
30915.00
Each
26819
2995.02
29814.00
Each
26240
2995.02
29235.00
Each
33204
2995.02
36199.00
12-3-16
Each
30193
2995.02
33188.00
12-3-17
Each
36045
2995.02
39040.00
12-3-18
Each
34070
2995.02
37065.00
12-3-19
Each
32653
2995.02
35648.00
12-3-20
Each
39475
2995.02
42470.00
12-3-21
12-3-22
12-3-23
12-3-24
12-3-25
12-3-26
12-3-27
12-3-28
12-3-29
12-3-30
12-3-31
12-3-32
Supplying and erecting submersible pumpset of required HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell, suitable for 300 to 850 LPM discharge at 44 to 14 m head & (max efficiency at 32 m head & 600 Ipm discharge & delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell, suitable for 250 to 700 LPM discharge at 55 to 25 m head & (max efficiency at 40 m head & 500 Ipm discharge & delivery pipe of necessary diameter with a necessary H. type clamp. As per specification o. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell, suitable for 60 to 175 LPM discharge at 130 to 75 m head & (max efficiency at 106 m head & 125 Ipm discharge & delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell, suitable for 20 to 80 LPM discharge at 221 to 101 m head & (max efficiency at 163 m head & 50 Ipm discharge &delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell, suitable for 20 to 80 LPM discharge at 258 to 118 m head & (max efficiency at 190 m head & 50 Ipm discharge &delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell, suitable for 60 to 175 LPM discharge at 146 to 85 m head & (max efficiency at 119 m head & 25 Ipm discharge & delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell, suitable for 300 to 850 LPM discharge at 55 to 17 m head & (max efficiency at 40 m head & 600 Ipm discharge &delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. WP-SMP Supplying and erectingsubmersible pumpset of required HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell, suitable for 400 to 900 LPM discharge at 41 to 25 m head & (max efficiency at 32 m head & 700 Ipm discharge & delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell, suitable for 70 to 250 LPM discharge at 153 to 84 m head & (max efficiency at 133 m head & 160 Ipm discharge & delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell, suitable for 60 to 175 LPM discharge at 162 to 94 m head & (max efficiency at 132 m head & 125 Ipm discharge & delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell, suitable for 20 to 80 LPM discharge at 294 to 134 m head & (max efficiency at 218 m head & 50 Ipm discharge & necessary diameter delivery pipe line with a necessary H. type clamp as per specification No. WP-SMP Supplying and erecting submersible pumpset suitable for 150 mm dia. borewell of required HP with 230V 50 cycles A.C. supply, with delievery head from 72 to 20 m and discharge from 10 to 50 Itrs per minute (Max.efficiency at 52 m head & 30 Itr discharge & delivery pipe of necessary diameter) erected with necessary H. type clamps as per specification No. WP-SMP Supplying and erecting submersible pumpset suitable for 150 mm dia. borewell of required HP with, 230V 50 cycles A.C., with delievery head from 84 to 40 m and discharge from 30 to 90 Itrs per minute (Max.efficiency at 69 m head & 60 Itr discharge & delivery pipe of necessary diameter) erected with necessary H. type clamps as per specification No. WP-SMP Supplying and erecting submersible pumpset suitable for 150 mm dia. borewellof required HP with, 230V 50 cycles A.C, with delievery head from 42 to 20 mtrs and discharge from 30 to 90 Itrs per minute (Max.efficiency at 34 mtr head & 60 Itr discharge & delivery pipe of necessary diameter) erected with necessary H. type clamps as per specification no. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. borewell of required HP with 230 V 50 cycles A. C. supply, suitable for 10 to 50 LPM discharge at 45 to 13 m head & (Max. effciency at 33 m head 30 LPM discharge ) & delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. WP-SMP
Each
36717
2995.02
39712.00
Each
39065
2995.02
42060.00
Each
39884
2995.02
42879.00
Each
42121
2995.02
45116.00
Each
48793
2995.02
51788.00
Each
42792
2995.02
45787.00
Each
39065
2995.02
42060.00
Each
37648
2995.02
40643.00
Each
43761
2995.02
46756.00
Each
47376
2995.02
50371.00
Each
55576
2995.02
58571.00
Each
28700
1749.29
30449.00
12-3-33
Each
29669
1749.29
31418.00
12-3-34
Each
25322
1749.29
27071.00
12-3-35
Each
18971
1749.29
20720.00
12-3-36
12-3-37
12-3-38
Supplying and erecting submersible pumpset suitable for 100 mm dia. borewell of required HP with, 230 V 50 cycles A. C., suitable for 10 to 50 LPM discharge at 54 to 15 m head & (Max. effciency at 39 m head 30 LPM discharge ) &delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. borewell of required HP with, 230 V 50 cycles A.C., suitable for 10 to 50 LPM discharge at 72 to 20 m head & (Max. effciency at 33 m. head 30 LPM discharge ) &delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. borewell of required HP with 230 V 50 cycles A. C., suitable for 85 to 170 LPM discharge at 32 to 12 mtr. head & (Max. effciency at 24 m head 130 LPM discharge) & delivery pipe of necessary diameter with a necessary H. type clamp. As per specification No. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. borewellof required HP with, 230 V 50 cycles A.C., suitable for 30 to 90 LPM discharge at 42 to 20 m head & (Max. effciency at 34 mtr. head 60 LPM discharge) & delivery pipe of necessary diameter with a necessary H. type clamp. As per specification No. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. Borewell of required HP with , 230 V 50 cycles A. C., suitable for 30 to 90 LPM discharge at 51 to 25 m head & (Max. effciency at 42 m head 60 LPM discharge ) & delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. borewell of required HP with ,230 V 50 cycles A. C., suitable for 10 to 50 LPM discharge at 32 to 12 m head & (Max. effciency at 26 m head 30 LPM discharge ) & delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. borewell of required HP with, 230 V 50 cycles A. C., suitable for 10 to 50 LPM discharge at 109 to 30 m head & (Max. effciency at 78 m head 30 LPM discharge ) & delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. borewell of required HP with,230 V 50 cycles A.C., suitable for 10 to 50 LPM discharge at 127 to 35 m head & (Max. effciency at 91 m head 30 LPM discharge ) & delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. borewell of required HP with , 230 V 50 cycles A. C, suitable for 30 to 90 LPM discharge at 84 to 40 m head & (Max. effciency at 69 m head 60 LPM discharge ) & delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. borewell of required HP with, 230 V 50 cycles A. C., suitable for 10 to 50 LPM discharge at 127 to 35 m head & (Max. effciency at 91 m head 30 LPM discharge ) & delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. borewell of required HP with, 230 V 50 cycles A.C., suitable for 10 to 50 LPM discharge at 144 to 40 m head & (Max. effciency at 104 m head 30 LPM discharge ) & delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. borewell of required HP with-, 230 V 50 cycles A.C., suitable for 85 to 170 LPM discharge at 43 to 18 m head & (Max. effciency at 33 m head 130 LPM discharge ) & delivery pipe of necessary diameter with a necessary H. type clamp. As per specification No. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. borewell --do--,230 V 50 cycles A.C, suitable for 10 to 50 LPM discharge at 160 to 45 m head & (Max. effciency at 116 m head 30 LPM discharge ) & delivery pipe of necessary diameter with a necessary H. type clamp. As per specification No. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. borewell of required HP 415 V 50 cycles A.C, suitable for 10 to 50 LPM discharge at 45 to13 m head & (Max. effciency at 33 m head 30 LPM discharge ) & delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. WP-SMP
Each
18509
1749.29
20258.00
Each
20131
1749.29
21880.00
Each
17096
1749.29
18845.00
12-3-39
Each
17667
1749.29
19416.00
12-3-40
Each
18408
1749.29
20157.00
12-3-41
Each
21587
1749.29
23336.00
12-3-42
Each
24153
1749.29
25902.00
12-3-43
Each
20291
1749.29
22040.00
12-3-44
Each
24003
1749.29
25752.00
12-3-45
Each
27460
1749.29
29209.00
12-3-46
Each
28629
1749.29
30378.00
12-3-47
Each
19817
1749.29
21566.00
12-3-48
Each
31407
1749.29
33156.00
12-3-49
Each
17315
1749.29
19064.00
12-3-50
12-3-51
12-3-52
12-3-53
Supplying and erecting submersible pumpset suitable for 100 mm dia. borewell of required HP with, 415 V 50 cycles A. C., suitable for 10 to 50 LPM discharge at 54 to 15 m head & (Max. effciency at 39 m head 30 LPM discharge ) & delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. borewellof required HP with, 415 V 50 cycles A. C, suitable for 10 to 50 LPM discharge at 72 to 20 m head & (Max. effciency at 52 m head 30 LPM discharge ) & delivery pipe of necessary diameter with a necessary H. type clamp. As per specification No. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. borewell of required HP with , 415 V 50 cycles A. C, suitable for 85 to 170 LPM discharge at 32 to 12 m head & (Max. effciency at 24 m head 130 LPM discharge ) & delivery pipe of necessary diameter with a necessary H. type clamp. As per specification No. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. borewell of required HP with,415 V 50 cycles A. C., suitable for 30 to 90 LPM discharge at 42 to 20 m head & (Max. effciency at 34 m head 60 LPM discharge ) & with a necessary H. type clamp as per specification No. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. borewell of required HP with, 415 V 50 cycles A. C., suitable for 30 to 90 LPM discharge at 51 to 25 m head & (Max. effciency at 42 m head 60 LPM discharge ) &delivery pipe of necessary diameter with a necessary H. type clamp. As per specification No. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. borewell of required HP with, 415 V 50 cycles A. C., suitable for 10 to 50 LPM discharge at 90 to 25 m head & (Max. effciency at 66 m head 30 LPM discharge ) & delivery pipe of necessary diameter with a necessary H. type clamp. As per specification No. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. borewell of required HP with, 415 V 50 cycles A. C., suitable for 10 to 50 LPM discharge at 109 to 30 m head & (Max. effciency at 78 m head 30 LPM discharge ) & delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. borewell of required HP with-, 415 V 50 cycles A. C., suitable for 30 to 90 LPM discharge at 63 to 30 m head & (Max. effciency at 51m head 60 LPM discharge ) &delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. borewell of required HP with-, 415 V 50 cycles A. C, suitable for 30 to 90 LPM discharge at 84 to 40 m head & (Max. effciency at 69 m head 60 LPM discharge ) & delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. borewellof required HP with, 415 V 50 cycles A. C., suitable for 10 to 50 LPM discharge at 127 to 35 m head & (Max. effciency at 91 m head 30 LPM discharge ) & delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. borewell of required HP with,415 V 50 cycles A. C., suitable for 10 to 50 LPM discharge at 144 to 40 m head & (Max. effciency at 104 m head 30 LPM discharge ) & delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. borewell of required HP with , 415 V 50 cycles A. C., suitable for 85 to 170 LPM discharge at 43 to 18 m head & (Max. effciency at 91 m head 130 LPM discharge ) & delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. borewell of required HP with, 415 V 50 cycles A. C., suitable for 10 to 50 LPM discharge at 160 to 45 m head & (Max. effciency at 116 m head 30 LPM discharge ) & delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. borewell of required HP with, 415 V 50 cycles A. C., suitable for 85 to 170 LPM discharge at 54 to 21m head & (Max. effciency at 11m head 130 LPM discharge ) & delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. WP-SMP
Each
17906
1749.29
19655.00
Each
19226
1749.29
20975.00
Each
17252
1749.29
19001.00
Each
17302
1749.29
19051.00
12-3-54
Each
18044
1749.29
19793.00
12-3-55
Each
22494
1749.29
24243.00
12-3-56
Each
23789
1749.29
25538.00
12-3-57
Each
18798
1749.29
20547.00
12-3-58
Each
22431
1749.29
24180.00
12-3-59
Each
25763
1749.29
27512.00
12-3-60
Each
20649
1749.29
22398.00
12-3-61
Each
18333
1749.29
20082.00
12-3-62
Each
29006
1749.29
30755.00
12-3-63
Each
22582
1749.29
24331.00
12-3-64
Supplying and erecting submersible pumpset suitable for 100 mm dia. borewell of required HP with, 415 V 50 cycles A. C., suitable for 30 to 90 LPM discharge at 105 to 50m head & (Max. effciency at 85m head 60 LPM discharge ) & delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. borewellof required HP with-, 415 V 50 cycles A. C, suitable for 30 to 90 LPM discharge at 126 to 60m head & (Max. effciency at 102m head 60 LPM discharge ) & delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. borewell of required HP with,415 V 50 cycles A. C., suitable for 85 to170 LPM discharge at 67 to 27 m head & (Max. effciency at 49 m head 130 LPM discharge ) & delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. borewellof required HP with, 415 V 50 cycles A. C., suitable for 30 to 90 LPM discharge at 147 to 70 m head & (Max. effciency at 119m head 60 LPM discharge ) & delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. borewell of required HP with, 415 V 50 cycles A.C., suitable for 30 to 90 LPM discharge at 168 to 80 m head & (Max. effciency at 136m head 60 LPM discharge ) & delivery pipe of necessary diameter with a necessary H. type clamp. As per specification No. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. borewell of required HP with, 415 V 50 cycles A.C., suitable for 85 to 170 LPM discharge at 88 to 36 m head & (Max. effciency at 68 m head 130 LPM discharge ) & delivery pipe of necessary diameter with a necessary H. type clamp. As per specification No. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. borewell of required HP with,415 V 50 cycles A.C., suitable for 85 to 170 LPM discharge at 110 to 46 m head & (Max. effciency at 83 m head 130 LPM discharge ) & delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. borewell of required HP with ,415 V 50 cycles A.C., suitable for 85 to 170 LPM discharge at 133 to 55 m head & (Max. effciency at 100 m head 130 LPM discharge ) & delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. WP-SMP Preferably energy efficient motors with p.f above 0.9 shall be used.
Each
26027
1749.29
27776.00
12-3-65
Each
27544
1749.29
29293.00
12-3-66
Each
24744
1749.29
26493.00
12-3-67
Each
31068
1749.29
32817.00
12-3-68
Each
32689
1749.29
34438.00
12-3-69
Each
27560
1749.29
29309.00
12-3-70
Each
30489
1749.29
32238.00
12-3-71
Each
32601
1749.29
34350.00
Note :-
12-4-2
Each
18559
1749.29
20308.00
12-4-3
Each
28625
1749.29
30374.00
12-4-4
Each
28181
1749.29
29930.00
12-4-5 (New)
Each
15448
1749.29
17197.00
12-4-6 (New)
Each
16325
1749.29
18074.00
Note :-
1) Preferably energy efficient motors with p.f above 0.9 shall be used.
12.5 Accessories
12-5-1 Supplying and erecting D.O.L. Starter 400V. 3 phase, 50 cycles with no volt coil and overload element with necessary materials and connected to supply upto 10 H.P. Supplying and erecting D. O. L. Starter suitable for 250V. single phase, 50 cycleswith overload element with necessarymaterials and connected to supply upto 2 H.P. Supplying and erecting hand operated star/delta starter suitable for 7.5 H.P. to 12.5 H.P. for 3 phase squirrel cage motor totally enclosed with overload and no volt relay complete erected on provided angle iron frame. Supplying and erecting fully Automatic star/delta starter suitable for 10 H.P. to 12.5 H.P. for 3 phase squirrel cage motor totally enclosed with overload and no volt relay complete erected on provided angle iron frame. (similar to L & T make MK-1 FASD model.) Supplying and erecting fully Automatic star/delta starter suitable for 15.0 H.P. to 25 H.P. squirrel cage motor totally enclosed with overload and no volt relay completeerected on provided angle iron frame.(Similar to L & T make ML-1.5 FASDModel) Supplying and erecting fully Automatic star / delta starter suitable for above 25 H. P. to 35 H. P. squirrel cage motor totally enclosed with overload and no volt relay complete erected on provided angle iron frame. (similar to L & T make MK-2 FASD model.) Supplying & erecting directly operated single phasing preventor omp[lete erected to supply to operate in case of single phaseing with guarantee for mi9nimum one Year. Supplying and erecting flat flexible 3 core 2.5 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete. Supplying and erecting flat flexible 3 core 4 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete. Supplying and erecting flat flexible 3 core 6 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete. Supplying and erecting flat flexible 3 core 1.5 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete. Supplying and erecting cover for motor made from G.I. sheet of 1.25mm (18 SWG) for protection from rain complete with collar at bottom & strengthening with M.S. strip, handle at top for lifting & drip proof louvers for ventilation erected at the position. (size to be specified in sq. m.) Supplying and erecting single pole 250V or double pole 500 V 10 A float switch with 2m chain with adjustable stop counter weight float with necessary materials in position, complete Supplying & erecting Water lavel controller 230/415 V AC., Two way for under ground tank operation only. Supplying & erecting Water lavel controller 230/ 415V AC., Four way for under ground & Over head tank operation . Supplying & erecting PVC coated 5 mm dia Brass Sensor/ electrode duly wired with nut & bolts complete Supplying & erecting automatic control panel for 1 to 6 HP centrifugal/ submersible pump set consisting of DOL starter, S.P.P., Water level controller, ammeter, voltmeter, phase indicating lamp etc. 2 way for U/G tank. Supplying & erecting automatic control panel for 1 to 6 HP centrifugal/ submersible pump set consisting of DOL starter, S.P.P., Water level controller, ammeter, voltmeter, phase indicating lamp etc. 4 way for U/G tank.& OH tank. Supplying & erecting automatic control panel for 7 to 10 HP centrifugal/ submersible pump set consisting of DOL starter,S.P.P., Water level controller , ammeter, voltmeter, phase indicating lamp etc. 2 way for U/G tank. Supplying & erecting automatic control panel for 7 to 10 HP centrifugal/ submersible pump set consisting of DOL starter,S.P.P., Water level controller , ammeter, voltmeter, phase indicating lamp etc. 4 way for U/G tank.& OH tank. Supplying & erecting automatic control panel for 11to15 HP centrifugal/ submersible pump set consisting of star delta starter,S.P.P., Water level controller , ammeter, voltmeter, phase indicating lamp etc. 2 way for U/G tank. Each 1755 61.23 1816.00
12-5-2
Each
1072
54.9
1127.00
12-5-3
Each
5298
123.52
5422.00
12-5-4
Each
6543
123.52
6667.00
12-5-5
Each
9809
123.52
9933.00
12-5-6
Each
16707
123.52
16831.00
12-5-7.
Each
3872
123.52
3996.00
12-5-8
Mtr.
56
13.72
70.00
12-5-9
Mtr.
83
13.72
97.00
12-5-10
Mtr.
116
13.72
130.00
12-5-11
Mtr.
36
13.72
50.00
12-5-12
Sqm.
1320
278.7
1599.00
12-5-13
Each
4515
149.91
4665.00
12-5-18
Each
9374
197.42
9571.00
12-5-19
Each
9433
197.42
9630.00
12-5-20
Each
10192
197.42
10389.00
12-5-21
Each
20588
197.42
20785.00
12-5-22
Note :-
Supplying & erecting automatic control panel for 11 to 15 HP centrifugal/ submersible pump set consisting of star delta starter,S.P.P., Water level controller , ammeter, voltmeter, phase indicating lamp etc. 4 way for U/G tank.& OH tank. For single phase pump panel, reduce overall rate by 50%
Each
22759
197.42
22956.00
12.6 Dismantling
12-6-1 12--6-2 12-6-3 12--6-4 12-6-5 12-6-6 Dismantling the existing water pump set centrifugal type without pipeline complete and making the site clear. Dismantling the existing ejecto type water pump set without pipeline complete and making the site clear. Dismantling the existing ejecto pump with PVC pipeline. Dismantling the existing ejecto pump with GI pipeline upto 10 m depth. Dismantling the existing submersible pump with PVC pipeline. Dismantling the existing submersible pump with GI pipeline upto 10 m depth. (For additional depth of each 3 mtrs or part thereof add Rs.50/- per 3 meter, in the rates) HP HP Each Each Each Each 0 0 0 0 0 0 47.51 47.51 614.42 1228.83 614.42 1228.83 48.00 48.00 614.00 1229.00 614.00 1229.00
Chapter 13 : FIRE FIGHTING & FIRE ALARM (FF) 13.1 Main Fire Pumps (Single Stage Centrifugal) (MFP/SSC)
13-1-1 Supplying and installing, testing, perfect aligning and proper leveling and commissioning of fire service main pump, of 1400 LPM (Litres/min.) at 56m centrifugal type single stage pump of 30 HP, (22 kW) with Suction / Delivery size of 80 / 65 mm as per specification No. FFMFP/SSC Supplying and installing, testing, perfect aligning and proper leveling and commissioning of fire service main pump, of 1800 LPM (Litres/min.) at 76 m head centrifugal type single stage pump, 50 HP, (37 kW) Suction / Delivery size of, 80 / 65 mm as per specification No. FFMFP/SSC Supplying and installing, testing, perfect aligning and proper leveling and commissioning of fire service main pump, of 2400 LPM (Litres/min.) at 76 m head centrifugal type single stage pump, 75 HP, (55 kW) Suction / Delivery size of 100 / 80 mm as per specification No. FFMFP/SSC Each 113966 6751.2 120717.00
13-1-2
Each
179233
6751.2
185984.00
13-1-3
Each
263187
8750.7
271938.00
13-2-2
Each
313407
8750.7
322158.00
13-2-3
Each
364684
10626.68
375311.00
13-3-2
Each
110846
2499.9
113346.00
13-3-3
Each
157300
3756.18
161056.00
13-3-4
Each
98762
2499.9
101262.00
13-3-5
Each
215684
3756.18
219440.00
13-3-6
Each
130904
2499.9
133404.00
13-4-1
13-4-2
13-4-3
13-4-4
Supplying installing, testing, commissioning of Jockey Pump of 240 LPM at 56 m head, 3 ph. 440 A.C.15 HP, (11 kW) Suction / Delivery Size 50/32 mm as per specification No. FF-MFP/JP Supplying installing, testing, commissioning of Jockey Pump of 240 LPM at 105 mtr. head 3 ph. 440 A.C., 20 HP (18.5 kW) Suction / Delivery Size 50/32 mm as per specification No. FF-MFP/JP Jockey Pumps (Submercible type) Supplying installing, testing, commissioning of Jockey Pump Submercible type, 4 stage, 240 LPM at 56m head, 7.5HP as per specification No. FF-MFP/JP Supplying installing, testing, commissioning of Jockey Pump Submercible type, submercible pump, 6 stage, 240 LPM at 105m head, 10HP as per specification No. FF-MFP/JP
Each
38027
963.85
38991.00
Each
75900
1375.58
77276.00
Each
37327
624.97
37952.00
Each
62016
750.6
62767.00
13-5-2
Each
28923
908.96
29832.00
13.6 Pipes (PP) Supplying and installing G.I.pipe above ground of C class ERW of size 20 mm dia with necessary fittings as per specification No. FF-PP Supplying and installing G.I.pipe above ground of C class ERW of size 25 mm dia with necessary fittings as per specification no. FF-PP Supplying and installing G.I.pipe above ground of C class ERW of size 50 mm dia with necessary fittings as per specification No. FF-PP Supplying and installing G.I.pipe above ground of C class ERW of size 75/80 mm dia with necessary fittings as per specification No. FF-PP Supplying and installing G.I.pipe above ground of C class ERW of size 100 mm dia with necessary fittings as per specification no. FF-PP Supplying and installing G.I.pipe above ground of C class ERW of size 150 mm dia with necessary fittings as per specification no. FF-PP Supplying and installing G.I.pipe above ground of C class ERW of size 200 mm dia with necessary fittings as per specification no. FF-PP In case of laying underground pipes, add 20 % in the above overall rates, for excavation and anti-corrosive protections.
13-7-13 13-7-14
Each Each
1741 1991
157.3 157.3
1898.00 2148.00
13-7-15 13-7-16
13-7-21 13-7-22
13-7-23 13-7-24
Supplying & Installing cast iron double flange butterfly valve of size 150 mm dia. as per specification No. FF-VL/BFV Supplying & Installing cast iron double flange butterfly valve of size 200 mm dia.as per specification No. FF-VL/BFV Non Return Valves (NRV) Supplying and installing double flange NRV of size 75/80 mm dia as per specification No. FF-VL/NRV Supplying and installing double flange NRV of size 100 mm dia as per specification No. FF-VL/NRV Supplying and installing double flange NRV of size 150 mm dia as per specification No. FF-VL/NRV Supplying and installing double flange NRV of size 200 mm dia as per specification No. FF-VL/NRV Gate / Wheel Valves (GV) Supplying & installing gun metal gate valve of size 20/25mm dia as per specification No. FF-VL/GV Supplying & installing gun metal gate valve of size 50 mm dia as per specification no. FF-VL/GV Hydrant Valves (HV) Supplying and installing gun metal single outlet hydrant valve fitted with necessary accessories complete as per specification No. FF-VL/HV Supplying and installing gun metal Double outlet hydrant valve fitted with necessary accessories complete as per specification No. FF-VL/HV
Each Each
3496 5493
157.3 157.3
3653.00 5650.00
Each Each
514 818
68.62 68.62
583.00 887.00
Each Each
7305 22669
142.52 142.52
7448.00 22812.00
13-8-2
Each
5757
142.52
5900.00
13-8-3
Each
5690
124.57
5815.00
13-8-4
Each
8992
142.52
9135.00
13-8-5
Each
2873
2873.00
13-8-6
Each
3042
3042.00
13-8-7
Each
5978
5978.00
13-8-8 13-8-9
Mtr. Mtr.
144 104
1.06 1.06
145.00 105.00
13-8-10 13-8-11
Each Each
2579 878
0 0
2579.00 878.00
13-8-12
Each
6414
187.91
6602.00
13-8-13
Each
10594
187.91
10782.00
13-8-14
Each
11071
250.2
11321.00
13-8-15
Each
479
31.67
511.00
13-8-16
13-8-17
13-8-18
13-8-19
13-8-20
13-8-21
13-8-22
Supplying and installing pressure gauge of 100 mm ., 0-300 PSI or 0-21 kg per cm square fitted with 12/15 mm . pad cock valve, and G.I. pipe, elbow etc. as per requirement in an approved manner as per specification No. FF-FFA/PG Pressure Switch (PS) Supplying and installing DANFOSS make pressure switch with 12/15 mm isolation valve, G.I. nipple, elbow etc. in an approved manner as per specification No. FF-FFA/PS Orifice Plate (OP) Supplying and erecting one no. Brass orifice plate having 6 mm. thickness, 140 mm outer dia of 140 mm at every single outlet hydrant valve as per specification No. FF-FFA/OP Supplying and erecting one no. Brass orifice plate having 6 mm thickness, 160 mm outer dia at every double outlet hydrant valve as per specification No. FF-FFA/OP MS / CRCA Boxes (BOX) Supplying and erecting M.S./CRCA cabinet for housing single hydrant valve (size 400 x 400 x 400mm.) made from 16 SWG sheet and angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8"x6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour. Supplying and erecting M.S./CRCA cabinet for housing Fire Brigade / SIEMESE connections (size 1250 x 400 x 300 mm.) made from 16 SWG sheet and angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8" x 6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour. Supplying and erecting M.S./CRCA cabinet for housing Floor Hydrant valve, hose pipe, hose reel and branch pipe (size 1000 mm. x 736 x 736 mm.) made from 16 SWG sheet and angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8"x6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour.
Each
712
35.89
748.00
Each
1507
49.62
1557.00
Each
630
38.01
668.00
Each
710
49.62
760.00
Each
3278
187.91
3466.00
Each
5430
187.91
5618.00
Each
11236
250.2
11486.00
Note :-
351 111 41
13-10-5
Mtr.
49
7.39
56.00
13-10-6
Mtr.
70
11.61
82.00
13-10-7
Mtr.
89
13.72
103.00
13-10-8
Mtr.
518
25.34
543.00
13-10-9
Mtr.
702
25.34
727.00
13-10-10
13-10-12
Note :13-10-13
Note :13-10-14
Note :13-10-15
Note :-
Supply and erecting seven core 1.5 mm sq. Mineral Insulated copper cable with an overall (LSF) covering. 750 Volt. To withstand temp. 950 Deg C for period of 3 hrs., Mechanical shock and High Pressure water stream used during the fire fighting as per specification no FF-FAAS/MIC Supply and erecting Gland and Plain Seals suitable for 2 Core 1.5 mm sq. Mineral Insulated copper cable as per specification no FF-FAAS/MIC Supply and erecting Gland and Plain Seals suitable for 2 Core 2.5 mm sq. Mineral Insulated copper cable as per specification no FF-FAAS/MIC Supply and erecting Gland and Plain Seals suitable for 7 Core 1.5 mm sq. Mineral Insulated copper cable as per specification no FF-FAAS/MIC 1) Item no 13-10-8 to 13-10-13 shall be utilised only for original work with prior permission from Chief Engineer (Electrical) 2) Mineral Insulated Copper Cable (A heavy duty grade with a voltage rating of 1000 volt - BS 6207:Part 1:1969) other than above three category up to 16 sq. mm shall be preferably used in hazardous places like basement and Mezzanine floor for all utility services in Govt installation Supplying, erecting, testing and commissioning the 2 Zones Microprocessor based conventional Fire Alarm Control Panel (FACP) with standard accessories complete as per specification No. FFFAAS/FACP Increase over all rate by 25 % for additional zone as per requirement. Supplying, erecting, testing and commissioning 2 Zone, local signal control panel (LCP) with standard accessories complete as per specification No. FF-FAAS/LCP Increase over all rate by 10 % for additional zone as per requirement. Supplying, erecting , testing & commissioning the 2 Zones Microprocessor based conventional fire alarm control panel (FACP) with standard accessories complete as per specification No.FF-FAAS/FACP. Increase over all rate by 25% for additional Zone as per requirement. Supplying, erecting , testing & commissioning the 2 Zones, local control panel (LCP) with standard accessories complete as per specification No. FFFAAS/LCP. Increase over all rate by 10% for additional Zone as per requirement.
Mtr.
1490
49.62
1540.00
Each
11150
624.97
11775.00
Each
5200
124.57
5325.00
Each
11150
624.9744 11775
Each
5200
124.5726 5325
13-12-2
Each
6623
142.52
6766.00
13-12-3
Each
7589
142.52
7732.00
Unit
14-1-1
14-1-2
14-1-3
14-1-4
14-1-5
14-1-6
14-1-7
14-1-8
14-1-9
14-1-10
14-1-11
Temporary illumination consisting of strip lights consist of 50 bulbs 25W each in strip complete with holders, bulbs of required Wattage mains, Switchgears erected and dismantled without using scaffolding and maintaining the same upto three days. Temporary illumination consisting of strip lights consist of 50 bulbs 25W each in strip complete with holders, bulbs of required Wattage mains, Switchgears erected and dismantled, with using scaffolding and maintaining the same upto three days. Temporary illumination consisting of tube light day light & colour 4' X 40 Watts complete erected with tubes, mains and Switchgears with continuous earth wire erected and dismantled without using scaffolding upto three days. Temporary illumination consisting of tube light day light & colour 4' X 40 Watts complete erected with tubes, mains and Switchgears with continuous earth wire erected and dismantled, with using scaffolding upto three days. Temporary illumination consisting of flood light fitting 1000/500W. complete halogen fitting with lamp, holders, mains and Switchgears with continuous earth wire erected and dismantled without using scaffolding upto three days. Temporary illumination consisting of flood light 1000/500W. complete halogen fitting with lamp, holders, mains and Switchgears with continuous earth wire erected and dismantled, with scaffolding upto three days. Temporary illumination consisting of Metal Halide flood light fitting 250 W complete with lamp, holders, mains and Switchgears with continuous earth wire erected and dismantled without using scaffolding upto three days. Temporary illumination consisting of Metal Halide flood light fitting 250 W complete with lamp, holders, mains and Switchgears with continuous earth wire erected and dismantled, with using scaffolding upto three days. Temporary illumination consisting of Metal Halide flood light fitting 400 W complete with lamp, holders, mains and Switchgears with continuous earth wire erected and dismantled, without using scaffolding upto three days. Temporary illumination consisting of Metal Halide flood light fitting 400 W complete with lamp, holders, mains and Switchgears with continuous earth wire erected and dismantled, with using scaffolding upto three days. Temporary illumination consisting of white/colour series lights 50 Nos. with miniature lamps of 6.2 to 16V with holders, bulbs, mains and Switchgears erected and dismantled with rotor effect as approved without scaffolding upto three days. Temporary illumination consisting of white/colour series lights 50 Nos. with miniature lamps of 6.2 to 16V with holders, bulbs, mains and Switchgears erected and dismantled with rotor effect as approved with scaffolding upto three days. Temporary illumination consisting of 2000W. sungun or colour tran light fitting complete with stand cutter & strainer alongwith mains, tube & Switchgears with continuous earth wire erected & dismantled without scaffolding upto three days. Providing & fixing rotating machine to give running effect to strips lights & miniature lights upto a load of 5000 W either mechanical cum electrical or electronics complete with mains & Switchgears with continuous earth wire and dismantling upto three days. Temporary illumination wrapping of coloured gelatin paper to 40 W, fluorescent tube light/500 W flood light fitting complete with rubber boards and dismantling upto three days. Providing oscillating type pedestal air circulators 600/900 mm., or air cooler connected with necessary mains, Switchgears with continuous earthing maintaining the same during the function & including dismantling upto three days. Providing oscillating type pedestal fan 16" (400 mm) or ceiling fan connected with necessary mains, Switchgears with continuous earthing maintaining the same during the function & including dismantling upto three days. Providing evaporator air cooler connected with necessary mains, Switchgears with continuous earthing maintaining the same during the function & including dismantling upto three days. Providing heavy duty Exhaust fan 18" or 24" connected with necessary mains, Switchgears with continuous earthing maintaining the same during the function and including dismantling for three days. Providing temporary plug point with 3 pin 6A/16A with necessary mains & Switchgears & continuous earth connection upto three days.
Each
24
8.45
32.00
Each
24
14.78
39.00
Each
26
8.45
34.00
Each
26
14.78
41.00
Each
149
29.56
179.00
Each
149
38.01
187.00
Each
163
29.56
193.00
Each
163
38.01
201.00
Each
166
29.56
196.00
Each
166
38.01
204.00
729
172.08
901.00
14-1-12
729
287.15
1016.00
14-1-13
362
47.51
410.00
14-1-14
Each
332
47.51
380.00
14-1-15
Each
5.00
14-1-16
Each
288
288.00
14-1-17
Each
133
133.00
14-1-18
Each
362
362.00
14-1-19
Each
362
31.67
394.00
14-1-20
Each
16
9.5
26.00
14-1-21
14-1-22
14-1-23
14-1-24
14-1-25
14-1-26
14-1-27 (New)
14-1-28 (New)
Note :-
Providing 1.5 Ton capacity window Air conditioning unit complete with temporary frame and fabrication work and required material to achieve cooling temperature connected along with necessary mains, switchgear and continuous earthing maintaining the same during the function and including dismantling; for three days. Providing 280 liters capacity Refrigerator complete with M.S. stand if necessary connected with main switchgear and continuous earthing maintaining the same during the function and including dismantling; for three days. Providing 120/150 liter capacity water cooler with water filter (Candle type or UV tube) with M.S. stand complete with minor plumbing work if necessary connected with mains switchgear and continuous earthing maintaining the same during the function and including dismantling; for three days. Providing 20"/24" colour Television with multi channel tuner, connected with necessary mains switchgear with continuous earthing maintaining the same during the function and including dismantling; for three days. Providing 6V/10V with 20/40 Watt fluorescent emergency lamp connected with necessary mains switchgear and continuous earthing maintaining the same during the function and including dismantling; for three days. Providing Digital projector with spring loaded white screen connected with necessary mains, switchgear and maintaining the same during the function including dismantling. Temporary illumination consisting of Round LED / neon flex LED / flexible strip LED having 2 to 5 W capacity per meter and consisting suitable power adaptor with mains, Switchgears erected and dismantled without using scaffolding and maintaining the same upto three days. Temporary illumination consisting of Round LED / neon flex LED / flexible strip LED having 2 to 5 W capacity per meter and consisting suitable power adaptor with mains, Switchgears erected and dismantled with using scaffolding and maintaining the same upto three days. 1) Rates for item no 15.1.1 to 15.1.15 are for period of 3 days function which includes prepatory period with testing if any required and transportation. 2) For item no 15.1.16 to 15.1.25 the rates are for period of 3 days function which includes prepatory period with testing and connecting, commissioning & maintaining in healthy condition with transportation. 3) For each additional day after 3 days but not exceeding 15 days, add 25 % per day. 4) For additional (i.e. after for 3+15) days, add 5 % per day but total rental charge shall be limited to 80 % of full rate of completed item. 5)For item no 15.1.26 the rates of projector for 1 function or for max. period of 1 day whichever is more including transportation, connections with project operator till completion of function.
Each
2599
321.99
2921.00
Each
551
78.12
629.00
Each
1028
314.6
1343.00
Each
346
346.00
Each
132
132.00
Each
5000
5000.00
Mtr.
2.11
9.00
Mtr.
3.17
10.00
14-2-2
Per Day
10506
573.25
11079.00
14-2-3
Per Day
8351
573.25
8924.00
14-2-4
Per Day
5803
573.25
6376.00
14-2-5
Per Day
5357
429.67
5787.00
14-2-6
Per Day
3575
287.15
3862.00
14-2-7
Note :-
Rental charges for supplying & maintaining 230V, 50 cycles A. C. generating set 1 to 2 kVA capacity with necessary fuel, mains Switchgears and accessories complete with continuous running on load/no load as per requirements with necessary certificate from Electrical Inspector. 1) Above rates are applicable for First day. For subsequent five days, the above rates shall be reduced by 10 %. 2) The rates of I No. 15-2-1 to 15-2-7 does not include transportation. 3) The above rates does not include preparatory & testing period, and no additional amount shall be paid for that. 4) The above rates are for function with on load working of DG Set upto 5 hours per day, and if, the DG Set is to be used continuously on load,or for more than five days this item shall not be operated. 5)The above rates are only for function purpose
Per Day
1597
142.52
1740.00
0 0 0 814
Each
415
15.84
431.00
Each Each
634 362
76.01 126.68
710.00 489.00
15-1-10
Each
50564
555.3
51119.00
15-1-11
Each
11591
555.3
12146.00
15-1-12
Each
399
191.08
590.00
44
38.01
82.00
16-1-3
Mtr.
130
116.13
246.00
16-1-4
Cum.
554.24
554.00
16-1-5
Cum.
140.41
140.00
16-1-6
Cum.
131.96
132.00
Note :-
2) For cables above 10 sq. mm bricks be laid on the cable width wise & overall rate shall be increased by 25%. In case of half round pipe is provided by making trench in soft soil reduce rate by Rs. 10.00 from overall rate of Item 17-1-3.
Note :-
16-2-2
Cum.
1805
680.93
2486.00
16-3-2
Each
1669
344.16
2013.00
16-3-3
Each
1964
404.33
2368.00
16-3-4
577.47
3823.00
16-3-5
311.43
1824.00
16-3-6
Cum.
2801
577.47
3378.00
16-3-7
Each
12805
1725.01
14530.00
16-3-8
Each
15852
2374.27
18226.00
16-3-9
Each
25520
3815.3
29335.00
16-3-10
Each
32911
5132.81
38044.00
16-3-11 (New)
Designing and Casting M 20 cement concrete foundation suitable for Conical/Octagonal poles up to 6 m long considering the safe soil bearing capacity at site as T/sq m, at 1.2 m depth, including excavation, foundation nuts & bolts, etc., in approved manner.
Each
5705
703.1
6408.00
16-3-12 (New)
Designing and Casting M 20 cement concrete foundation suitable for Conical/Octagonal poles for 7 & 8 m long considering the safe soil bearing capacity at site as T/sq m, at 1.5 m depth, including excavation, foundation nuts & bolts, etc., in approved manner.
Each
7131
878.34
8009.00
16-3-13 (New)
Designing and Casting M 20 cement concrete foundation suitable for Conical/Octagonal poles for 10 to 12 m long considering the safe soil bearing capacity at site as T/sq m, at 2 m depth, including excavation, foundation nuts & bolts, etc., in approved manner.
Each
16950
2319.37
19269.00
Note :-
Rate of c c foundation for Conical pole of 9 m long shall be as per rate of Item No 16-3-7
16-4-2
Mtr.
24
17.95
42.00
16-4-3
Mtr.
28
26.39
54.00
Each Each Each Each Job Job Per sqm of fencing Sqm.
16-4-11
181
26.39
207.00
16-4-12
Sqm.
238
53.84
292.00
16-4-13
Sqm.
451
53.84
505.00
16-4-14
Each
4.22
7.00
16-4-15
Each
58
34.84
93.00
16-5-4 16-5-5 16-5-6 16-5-7 16-5-8 16-5-9 16-5-10 16-5-11 16-5-12 16-5-13 16-5-14 16-5-15 16-5-16
16-5-17
16-5-18
Supplying and erecting ISI mark G.I.pipe 32 mm dia.B class at position with accessories. As per specification No. CW-PLB/GP Supplying and erecting ISI mark G.I.pipe 40 mm. dia. B class at position with accessories. As per specification No. CW-PLB/GP Supplying and erecting ISI mark G.I.pipe 50 mm dia.B class at position with accessories. As per specification No. CW-PLB/GP Supplying and erecting ISI mark G.I.pipe 65 mm. dia. B class at position with accessories. As per specification No. CW-PLB/GP Supplying and erecting ISI mark G.I.pipe 75/80 mm dia. B B class at position with accessories. As per specification No. CW-PLB/GP Supplying and erecting ISI mark G.I.pipe 100 mm dia. B class at position with accessories. As per specification No. CW-PLB/GP Supplying and erecting ISI mark G.I. pipe 32 mm. dia C class at position with accessories. As per specification No. CW-PLB/GP Supplying and erecting ISI mark G.I. pipe 40 mm. dia C class at position with accessories. As per specification No. CW-PLB/GP Supplying and erecting ISI mark G.I. pipe 50 mm. dia C class position with accessories. As per specification No. CW-PLB/GP Supplying and erecting ISI mark G.I. pipe 65 mm. dia C class position with accessories. As per specification No. CW-PLB/GP Supplying and erecting ISI mark G.I. pipe 75/80 mm dia C class position with accessories. As per specification No. CW-PLB/GP Supplying and erecting ISI mark G.I. pipe 100 mm dia C class position with accessories. As per specification No. CW-PLB/GP Supplying and erecting high density polythene pipe ISI mark 32 mm 2 dia. suitable for pressure of 6 kg/cm connected to Jet/Submersible pump with required material complete. Supplying and erecting high density polythene pipe ISI mark 40 mm 2 dia. suitable for pressure of 6 kg/cm connected to Jet/Submersible pump with required material complete. Supplying and erecting high density polythene pipe ISI mark 50 mm. dia. suitable for pressure of 6 Kg. / Cm2 connected to Jet/Submersible pump with required material complete.
Mtr. Mtr. Mtr. Mtr. Mtr. Mtr. Mtr. Mtr. Mtr. Mtr. Mtr. Mtr. Mtr.
192 223 312 428 560 836 221 260 356 485 637 941 51
13.72 14.78 14.78 14.78 32.73 32.73 13.72 15.84 15.84 15.84 32.73 32.73 15.84
206.00 238.00 327.00 443.00 593.00 869.00 235.00 276.00 372.00 501.00 670.00 974.00 67.00
Mtr.
76
15.84
92.00
Mtr.
116
15.84
132.00
16-6-22 16-6-23 16-6-24 16-6-25 16-6-26 16-6-27 16-6-28 16-6-29 16-6-30 16-6-31 16-6-32
16-6-33
16-6-34
16-6-35
16-6-36
Supplying and erecting Non return valve 65mm dia in position made of gun metal. Supplying and erecting Non return valve 75/80mm dia in position made of gun metal. Supplying and erecting Non return valve 100mm dia in position made of gun metal. Supplying and erecting C.I. flange 25mm dia with necessary nuts bolts and washers with rubber seal in position. Supplying and erecting C.I. flange 40mm dia with necessary nuts bolts and washers with rubber seal in position. Supplying and erecting C.I. flange 50mm.dia with necessary nuts bolts and washers with rubber seal in position. Supplying and erecting C.I. flange 65mm. dia with necessary nuts bolts and washers with rubber seal in position. Supplying and erecting C.I. flange 75/80mm. dia with necessary nuts bolts and washers with rubber seal in position. Supplying and erecting C.I. flange 100mm. dia with necessary nuts bolts and washers with rubber seal in position. Supplying and erecting 0-100 lb/sq. inch pressure gauge having 4" dia complete with socket for 1/2" G.I. pipe. Supplying and erecting 40mm dia. ball type foot valve having C.I. body lined from inside with FRP and synthetic rubber coated (reinforced) ball, leaded fin bronze (IS:318) FRP seat, carbon steel (IS:1363 class 4) fastners, C.I./M.S.Stainer Complete Supplying and erecting 50mm dia. ball type foot valve having C.I. body lined from inside with FRP and synthetic rubber coated (reinforced) ball, leaded fin bronze (IS:318) FRP seat, carbon steel (IS:1363 class 4) fastners, C.I./M.S.Stainer Complete Supplying and erecting 65mm dia. ball type foot valve having C.I. body lined from inside with FRP and synthetic rubber coated (reinforced) ball, leaded fin bronze (IS:318) FRP seat, carbon steel (IS:1363 class 4) fastners, C.I./M.S.Stainer Complete Supplying and erecting 75/80mm dia. ball type foot valve having C.I. body lined from inside with FRP and synthetic rubber coated (reinforced) ball, leaded fin bronze (IS:318) FRP seat, carbon steel (IS:1363 class 4) fastners, C.I./M.S.Stainer Complete Supplying and erecting 100mm dia. ball type foot valve having C.I. body lined from inside with FRP and synthetic rubber coated (reinforced) ball, leaded fin bronze (IS:318) FRP seat, carbon steel (IS:1363 class 4) fastners, C.I./M.S.Stainer Complete
Each Each Each Each Each Each Each Each Each Each Each
54.9 54.9 54.9 11.61 11.61 11.61 11.61 17.95 17.95 15.84 109.79
2077.00 2623.00 4975.00 73.00 78.00 93.00 98.00 119.00 219.00 368.00 880.00
Each
1078
163.63
1242.00
Each
1574
218.53
1793.00
Each
2167
273.43
2440.00
Each
4133
328.32
4461.00
17-1-2
Each
408
125.63
534.00
17-1-3
Each
408
125.63
534.00
17-1-4
Each
442
125.63
568.00
17-1-5
Each
615
125.63
741.00
17-1-6
Each
684
155.19
839.00
17-1-7
Each
715
232.25
947.00
Note :-
17-1-8
17-1-9
17-1-10
17-1-11
17-1-12
17-1-13
17-1-14
17-1-15
17-1-16
17-1-17
17-1-18
Note :-
Rewinding of electric motor upto 1H.P. three phase upto 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, replacing ball bearing, bush bearing, screws etc. testing for the original speed and no load consumption with guarantee for one year. Rewinding of electric motor upto 2 H.P. three phase upto 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, replacing ball bearing, bush bearing, screws etc. testing for the original speed and no load consumption with guarantee for one year Rewinding of electric motor upto 3 H.P. three phase upto 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, replacing ball bearing, bush bearing, screws etc. testing for the original speed and no load consumption with guarantee for one year Rewinding of electric motor upto 5 H.P. three phase upto 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, replacing ball bearing, bush bearing, screws etc. testing for the original speed and no load consumption with guarantee for one year Rewinding of electric motor upto 7.5 H.P. three phase upto 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, replacing ball bearing, bush bearing, screws etc. testing for the original speed and no load consumption with guarantee for one year Rewinding of electric motor upto 10 H.P.three phase upto 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, replacing ball bearing, bush bearing, screws etc. testing for the original speed and no load consumption with guarantee for one year Rewinding of electric motor upto 12.5 H.P. three phase upto 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, replacing ball bearing, bush bearing, screws etc. testing for the original speed and no load consumption with guarantee for one year Rewinding of electric motor upto 15 H.P. three phase upto 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, replacing ball bearing, bush bearing, screws etc. testing for the original speed and no load consumption with guarantee for one year Rewinding of electric motor upto 20 H.P. three phase upto 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, replacing ball bearing, bush bearing, screws etc. testing for the original speed and no load consumption with guarantee for one year Rewinding of submersible pump motor of all types and makes upto and including 5 HP with coated copper wires & overhauling with minor repairs, replacing ball bearing, bush bearing, screws etc. testing for the original speed, H.P. and no load consumption & guarantee for one year. Rewinding of submersible pump motor of all types and makes above 5 H.P. upto 15 H.P with coated copper wires & overhauling with minor repairs, replacing ball bearing, bush bearing, screws etc. testing for the original speed, H.P. and no load consumption & guarantee for one year. 1) Burnt ceiling fans and motor older than 10 yrs shall not be rewound. 2) Rates for rewinding of 2800/ 2900 RPM motors, shall be decreased by 5%. 3) The dismantled material shall be retained by the contractor.
Each
1216
204.81
1421.00
Each
1660
204.81
1865.00
Each
1798
243.87
2042.00
Each
3082
420.17
3502.00
Each
3576
533.13
4109.00
Each
3857
557.41
4414.00
Each
4548
608.08
5156.00
Each
5354
737.93
6092.00
Each
6329
887.84
7217.00
H.P.
1069
441.28
1510.00
H.P.
1309
441.28
1750.00
17.2 Replacement
17-2-1 Replacing the existing bearing of approved make for electric motor A.C single phase / 3 phase upto 1 H.P. of all types with due alignment of the shaft and tested. Replacing the existing bearing of approved make for A.C electric motor 3 phase 2 H.P. to 3 H.P. of all types with due alignment of the shaft and tested. Replacing the existing bearing of approved make for electric motor 5 H.P. & 7.5 H.P. of all types with due alignment of the shaft and tested. Replacing the existing bearing of approved make for electric motor 10 H.P. & 12.5 H.P. of all types with due alignment of the shaft and tested. Replacing the existing bearing of approved make for electric motor 15H.P.to 20 H.P. of all types with due alignment of the shaft and tested. Replacing the existing ball bearing of table/ cabin/ pedestal/ ceiling/ exhaust fan complete with alignment of shaft & tested. Replacing the existing Bush/ rubber, ring, washers of table/ cabin/ pedestal/ ceiling/ exhaust fan complete with alignment of shaft & tested. Replacing the existing capacitor of 2.5 microfarad for all types of fan complete with wiring. Replacing the existing capacitor of 4 microfarad for all types of fittings complete with wiring. 1) Above rates are applicable for replacement of bearing only. Each 213 51.73 265.00
17-2-2
Each
289
51.73
341.00
17.3 Accessories
17-3-1 Filtration of Transformer oil on site till satisfactory test results. Liter 8 6.33 14.00
17-3-2 17-3-3 17-3-4 17-3-5 17-3-6 17-3-7 17-3-8 17-3-9 17-3-10 17-3-11 17-3-12 17-3-13 17-3-14 17-3-15 17-3-16 17-3-17
17-3-18 17-3-19
17-3-20
Supplying and topping up filtered transformer oil of approved make with test certificate. Supplying and erecting No-Volt-Coil L&T make for motor starters upto 12.5 H.P. Supplying and erecting No-Volt-Coil L&T make of type ML-2 for 15 H.P.to 30 H.P.motor Supplying and erecting No-Volt-Coil L&T make of type ML-4 above 30 H.P.to 60 H.P. motor Supplying and erecting thermal Overload Relay L&T make for MK 1 motorstarter suitable for up to 12.5 HP Supplying and erecting thermal over load relay L&T make ML-1/ ML-1.5 for motor starter 15 H.P. to 30 H.P. Supplying and erecting thermal over load relay L&T make MK-2 / ML-3 for motor starter above 30 H.P.to 60 H.P. Supplying & erecting L&T make timer for MK-1 motor starter suitable from upto 12.5 H.P. Supplying & erecting L&T make timer for ML-2 motor starter suitable from 15 H.P to 30 H.P. Supplying & erecting thermal timer HT 2000 L&T make above 30 H.P. to 60 H.P. Supplying & erecting contactor MK-1, LT make for motor starter upto 12.5 H.P. Supplying and erecting contactor L&T make ML-1.5 or suitable from MN series for motor starter suitable from 15 H.P. to 30 H.P. Supplying and erecting contactor L&T make ML2 or suitable from MN series for motor starter suitable above 30 HP to 60 HP Supplying and erecting contactor L&T make ML-3 or suitable from MN series for motor starter suitablefrom 40 HP to 50 HP Supplying and erecting contactor L&T make ML-4 or suitable from MN series for motor starter suitable from 60 HP to 75 HP. Dismantling the existing ceiling fan of various sizes and replacing the bolt and nuts at reel insulator and at bottom of the down rod with half threaded bolt of 3/8 dia 2-1/2 to 3-1/2 long and 5/16 dia 1-3/4 to 2-1/4 long respectively required sizes with 2 plate washers with oiling, greasing and painting the date of repair and re-erecting at position. Replacing suitable capacity motor of water pump of air cooler of any capacity and type in lieu of old one. Checking the existing Indoor faulty fitting, finding the fault, repairing by provided necessary material, if any, and putting into beneficial use with necessary Tools & Tackles. Checking the existing outdoor faulty fitting, finding the fault, repairing by provided necessary material, if any, and putting into beneficial use with necessary Tools & Tackles.
Liter Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each
154 206 562 829 827 1390 2062 719 1600 1789 860 1583 3226 4362 7101 50
9.5 51.73 51.73 51.73 51.73 51.73 51.73 51.73 51.73 51.73 51.73 51.73 51.73 516.24 51.73 76.01
164.00 258.00 614.00 881.00 879.00 1442.00 2114.00 771.00 1652.00 1841.00 912.00 1635.00 3278.00 4878.00 7153.00 126.00
Each Each
464 0
51.73 35.89
516.00 36.00
Each
71.79
72.00
18-1-30 18-1-31 18-1-32 18-1-33 18-1-34 18-1-35 18-1-36 18-1-37 18-1-38 18-1-39 18-1-40 18-1-41 18-1-42 18-1-43 18-1-44 18-1-45 18-1-46 18-1-47 18-1-48 Note :-
Refrigerator above 165 ltr. Exhaust fan 9" sweep. Exhaust fan 12" sweep. Exhaust fan 15" sweep. Exhaust fan 18" sweep. Exhaust fan 24" sweep. Air cooler of any size(Without Fan) Air cooler of any size(With Fan) Transformer Oil D.G. Set. Transformer Telephone Exchange (EPABX) Telephone instrument . Water Purifier Inverter /UPS Voltage stabilizer Amplifier small Amplifier Big Mikes Rates for Items which are not covered in above list should be calculated on the basis of material / equipments considering it's site condition and prevailing market rates and approval should be taken from concerned Superintending Engineer ( Electrical)
Each Each Each Each Each Each Each Each Liter kVA kVA Each Each Each kVA kVA Each Each Each
2000 135 151 200 330 400 500 800 5 100 40 1100 50 80 50 50 400 450 70
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
2000.00 135.00 151.00 200.00 330.00 400.00 500.00 800.00 5.00 100.00 40.00 1100.00 50.00 80.00 50.00 50.00 400.00 450.00 70.00