Beruflich Dokumente
Kultur Dokumente
Use
F Series
270 Gallon
Stationary Full
Body Immersion Tank
(Hubbard Tank) F-270-S
Whitehall Model F-270-S Full Body Immersion and lifetime-sealed bearings. All parts contacting
Tank is recommended for treatment of upper and the water are stainless steel, chrome plated brass
lower extremities permitting patients full body or bronze.
immersion, room for body motion and exercise. Thermometer is provided with a dual scale,
This Hubbard style tank with figure “8” configura- adjustable calibration, and a stem inserts into a
tion allows therapists easy access to assure patient retainer to prevent rattle during whirlpool agita-
comfort. tion.
Tank Capacity is 270 gallons. GUIDE SPECIFICATIONS
Hubbard Tank figure “8” configuration is overall Provide Whitehall Stationary Full Body Immersion
93”L x 64”W x 22”D and is seamless welded con- Tank with figure “8” configuration (specify model
struction, fabricated from heavy gauge, type 304 number and options) with a 270-gallon capacity,
stainless steel, polished to a satin finish. Tank bottom 93”L x 64”W x 22”D. Hubbard tank shall be
is a rounded covered design to minimize bacteria fabricated from heavy gauge, type 304 stainless steel.
buildup. Tank has a reinforced stainless steel base Construction shall be seamless welded and exposed
supported by adjustable stainless steel legs. Tank fit- surfaces shall be polished to satin finish. Tank bottom
tings are two1-1/4” OD overflows, one 1-1/4” NPT shall be a seamless rounded coved design to mini-
filler spout, one lever operated quick open/close mize bacteria buildup and shall be reinforced with a
drain valve and an adjustable head rest. stainless steel base supported by stainless steel legs
Turbine Raising and Lowering Device permits which are adjustable. Provide twin turbine assem-
adjustment of desired height and direction of blies mounted on carriages with automatic counter-
water agitation towards the area of the body to be balance. Each turbine assembly with raising and
treated. It is spring balanced and provided with a lowering device shall permit adjustment of desired
locking device. height, direction of water agitation, and lock-
Twin Turbine Assemblies are mounted on car- ing in place.Turbine assemblies shall have UL
riages with automatic counter balance. Assemblies listed 1/2 HP jet pump motor with automatic
may be moved along the tank length for the most thermal overload protector, and lifetime-sealed
advantageous treatment position. Each assembly is bearings. Provide a thermometer with a stem retain-
equipped with Underwriters Laboratory listed 1/2 er to prevent rattle when whirlpool is in operation.
HP jet pump motor protected with an ABS plastic An adjustable head rest assembly is also provided.
shell, and automatic thermal overload protector,
Whitehall Mfg. > P.O. Box 3527 > City of Industry, CA 91744 > (800) 782-7706 > (626) 968-6681 > FAX (626) 855-4862
Note: Electrical requirements are 8 Amps / 115 Volts/ 60Hz/ 3 Pole GFI Receptacle.
Whitehall Mfg. > P.O. Box 3527 > City of Industry, CA 91744 > (800) 782-7706 > (626) 968-6681 > FAX (626) 855-4862