Beruflich Dokumente
Kultur Dokumente
Engineering
A Division of Caparo Precision Tubes Limited
BAR ON
Engineering
A Division of Caparo Precision Tubes Limited
THE COMPANY
Since 1983 Barton has been a subsidiary of Caparo Industries plc, a broad based group with interests in engineering and steel. Barton Engineering is a division of Caparo Precision Tubes Ltd. Operations have been transferred to the Hub Le Bas site in the West Midlands.
Caparo Group Ltd is a private U.K. holding company set up in 1978 specialising principally in the manufacture and supply of steel based consumable products to industry. During the 1980s a large number of industrial subsidiaries were acquired or developed organically, both in the U.K. and in the U.S.A., under the sub-grouping of Caparo Industries Plc, which was listed on the London Stock Exchange until it became a wholly owned subsidiary of Caparo Group Ltd in 1991. In addition to the industrial companies listed below, the group owns commercial properties in Londons West End, the luxury Osborne Hotel in Torquay and minority investments in quoted companies in the U.K. and North America.
THE QUALITY
Products listed in this brochure are either manufactured by Barton Engineering under a certified ISO 9000 system, or are manufactured by our suppliers under a certified ISO system or have their quality assured to the same level by rigorous inspection at Barton Engineering. ISO 9000 systems involve a complete set of working practices, disciplines and procedures - implemented at each stage of the manufacturing programme, from raw material inspection through to final despatch. As a result, all Barton products satisfy a uniform standard of quality and safety.
THE SERVICE
Barton provide a highly efficient customer service operation. Fully trained, specialist sales personnel working with computerised equipment provide accuracy, precision and speed at all times.
Hub Le Bas share the same site as BARTON ENGINEERING at Bilston, Wolverhampton in the West Midlands. As the leading distributor of steel tubing in the United Kingdom, Hub Le Bas have four strategically placed branches in Manchester, Bilston, Leicester & London. A comprehensive range of products is held at each branch that includes the following: Precision Welded Tube Cold Drawn Seamless Mechanical & Hydraulic Hot Finished Seamless Tube Carbon Hollow Bar Structural Hollow Sections Welded Gas List Tubes Stainless Steel Tubes Profiles & Shaped Tube Merchant Bar Architectural Systems in Steel & Stainless Steel Flo-Coat & Sculptured
Index
BAR ON
Engineering
A Division of Caparo Precision Tubes Limited
..................................................................................................4
Stocks, Dies & Guides ....................................................................................................5 Boxes Circular Small - Large ..............................................................................6-7 Boxes Circular Small Extension Pattern ..................................................8 Boxes Looping In & Adaptors ................................................................................9 Covers Circular Small - Large ............................................................................10 Hooks, Nipples, Couplings ....................................................................................11 Elbows, Tees, Bends, Rings, Washers ..........................................................12 Bushes, Plugs & Glands, Reducers, Locknuts....................................13 Saddles, Screws, Gaskets ........................................................................................14 Adaptable Boxes ................................................................................................................15 Flexible Metallic & PVC Metallic Conduit ..........................................16 Adaptors for Flexible Conduit ..........................................................................16 Switch & Socket Boxes, Earth Terminals ..............................................17 Quick Fix Cable Trunking ..............................................................................17-20 Lighting Trunking
..................................................................................................21-22
STANDARDS
Barton products are generally manufactured in accordance with the relevant British Standards. Details of particular standards are given below: Product British and European (Euro Norm) Standards Conduit - steel BS 4568 part 1 BS EN 50086-1:1994 and BS EN 50086-2:1996 Metric sizes BS 31 Imperial sizes Conduit Fittings BS EN 50086-1:1994 & Accessories and BS EN 50086-2:1996 Metric sizes BS 31 Imperial sizes Adaptable Boxes BS 4568 part 2 Conduit - Flexible BS EN 50086-2-3:1996 Switch & Socket Boxes BS 4662
BAR ON
Engineering
A Division of Caparo Precision Tubes Limited
Conduit Steel
Please Note: 1. Pre-galvanised conduit does not meet the requirements of BS 4568 or BS EN 50086. It does not meet corrosion classifications defined in these standards. 2. Binding materials used to make up bundles of Conduit are not intended to be used when lifting this product which should be handled only with approved slings.
External Diameter BS 4568/BS EN 50086 Part 1 Class 4 finish HOT DIPPED GALVANISED INSIDE & OUTSIDE 3.75 metre lengths BS 31 Class 4 finish HOT DIPPED GALVANISED INSIDE & OUTSIDE 3.75 metre lengths PRE-GALVANISED INSIDE & OUTSIDE 3.75 metre lengths BS 4568/BS EN 50086 Part 1 20mm 25mm 32mm
112 2
4 4
20 20
300 300
0.49 0.74
20mm 25mm
8 8 8 8 4
50 40 50 40 25
Above conduit is packed Class 2 finish 20mm BLACK ENAMELLED 25mm and shipped in lifts (also INSIDE & OUTSIDE 32mm known as Master 3.75 metre lengths Bundles). Each lift BS 31 Class 2 finish comprising the stated BLACK ENAMELLED 112 number of individual INSIDE & OUTSIDE 2 bundles measuring 3.75 metre lengths approximately 45-50 centimetres in diameter Also available in 3000m lengths and 3.75 metres long. The weight varies according to size and finish of conduit but approximate weights are shown above.
4 4
20 20
300 300
0.49 0.74
Conduit Steel
BAR ON
Engineering
A Division of Caparo Precision Tubes Limited
BAR ON
Engineering
A Division of Caparo Precision Tubes Limited
Terminal Box
Material: Finish: Size Box Qty Malleable Iron Galvanised 20mm 25mm 10 10
M181
Through Box
Material: Finish: Size Box Qty Malleable Iron Galvanised 20mm 25mm 10 10
M182
M189
Angle Box
Material: Finish: Size Box Qty Malleable Iron Galvanised 20mm 25mm 10 10
M183
M190
Tee Box
Material: Finish: Size Box Qty Malleable Iron Galvanised 20mm 25mm 10 10
M184
Intersection Box
Material: Finish: Size Box Qty Malleable Iron Galvanised 20mm 25mm 10 10
M185
M192
M186
M193
M194
BAR ON
Engineering
A Division of Caparo Precision Tubes Limited
M195
M196
Terminal Box
Size Box Qty Size Box Qty 20mm 5 112 5
M211
25mm 32mm 5 5 2 4
Through Box
Size Box Qty Size Box Qty 20mm 5 112 5
M212
25mm 32mm 5 5 2 4
Angle Box
Size Box Qty Size Box Qty 20mm 5 112 5
M213
25mm 32mm 5 5 2 4
Tee Box
Size Box Qty Size Box Qty 20mm 5 112 5
M214
25mm 32mm 5 5 2 4
Intersection Box
Size Box Qty Size Box Qty 20mm 5 112 5
M215
25mm 32mm 5 5 2 4
BAR ON
Engineering
A Division of Caparo Precision Tubes Limited
Terminal Box
Material: Finish: Size Box Qty Malleable Iron Galvanised 20mm 25mm 10 10
M241
Through Box
Material: Finish: Size Box Qty Malleable Iron Galvanised 20mm 25mm 10 10
M242
Angle Box
Material: Finish: Size Box Qty Malleable Iron Galvanised 20mm 25mm 10 10
M243
Tee Box
Material: Finish: Size Box Qty Malleable Iron Galvanised 20mm 25mm 10 10
M244
Intersection Box
Material: Finish: Size Box Qty Malleable Iron Galvanised 20mm 25mm 10 10
M245
BAR ON
Engineering
ADAPTORS
Material: Steel Finish Zinc Plated
A Division of Caparo Precision Tubes Limited
R274
Material: Steel. Finish: Zinc Plated 1 Hole or 4 Knockouts. Size: 29mm Deep x 63.5mm Internal Diameter. Box Qty 10
R114
Size: MALE to 20mm FEMALE 100 Box Qty: Size: 1 MALE to 25mm FEMALE 50 Box Qty:
M272
Material: Malleable. Finish: Galvanised 1,2,3,4 Holes. Size: 31mm Deep x 63.5mm Internal Diameter. Box Qty 10
R115
Size: 20mm MALE to FEMALE 100 Box Qty: Size: 25mm MALE to 1 FEMALE 50 Box Qty:
BAR ON
Engineering
A Division of Caparo Precision Tubes Limited
R280
R289
Covers, Light
R281
Loose, No screws Material: Steel Finish: Black Enamel, Galvanised Box Qty 100
Covers, Heavy
R282
Loose, No screws Material: Steel Finish: Black Enamel, Galvanised Box Qty 50
R381
M288
10
BAR ON
Engineering
F107
A Division of Caparo Precision Tubes Limited
NIPPLES
M502 Nipple, Normal
Material: Finishes: Size Box Qty Size Box Qty Steel Galvanised 20mm 25mm 32mm 100 100 50 1 1 2 2 25 20
COUPLINGS
Coupling, solid
Material: Finish: Size Box Qty Size Box Qty Material: Cover Finish: Size Box Qty Material: Finish: Size Box Qty Size Box Qty
F109
Coupling, Inspection
M103
Coupling, Earthing
Malleable Iron Galvanised 20mm 25mm 100 50 1 1 2 2 25 10
M105
Coupling, Flanged
M110/M111
Material: Malleable Iron Complete with washer & brass bush. M110 (Lead washer) M111 (Neoprene washer) Finish: Galvanised Size 20mm 25mm 32mm Box Qty 50 50 25
11
BAR ON
Engineering
A Division of Caparo Precision Tubes Limited
ELBOWS
Elbow, Solid
Material: Finish: Size Box Qty
TEES
M121 Tee, Solid
Material: Finish: Size Box Qty
M131
Malleable Iron Galvanised 20mm 25mm 32mm 25 25 10
M123
M133
BENDS
Bends, Normal, Internal Thread R141
Material: Finish: Size Box Qty Steel Galvanised 20mm 25mm 32mm 25 10 5
RINGS
Ring, Extension
Material: Finishes: Size Box Qty Size Box Qty Size Box Qty Steel Galvanised 6mm 10mm 100 50 16mm 19mm 25 25 32mm 38mm 10 10
R294
Bend, Inspection
Material: Cover Finish: Size Box Qty
M145
WASHERS
Lead
Neoprene Size 20mm 25mm 32mm Box Qty 50 50 25
F112 F113
Serrated
Material: Finish: Size Box Qty Steel Zinc Plated 20mm 25mm 100 100
F116
12
Conduit Steel
BAR ON
Engineering
A Division of Caparo Precision Tubes Limited
BUSHES
Bush, Short Male
Material: Size Box Qty Size Box Qty
REDUCERS
F531 Reducer
Material: Size Box Qty Size Box Qty
M471
Malleable Finish: Galvanised 25 x 20mm 32 x 20mm 100 50 32 x 20mm 112 x 2 50 25
F532
F534
Brass Finish: Self Colour 20mm 25mm 32mm 100 100 100 112 2 100 50
LOCKNUTS
Locknut, Hexagon Light R507
Material: Size Box Qty Size Box Qty Steel Finish: Galvanised 20mm 25mm 32mm 100 100 100 1 1 2 2 50 25
M527
R509
F535
13
BAR ON
Engineering
A Division of Caparo Precision Tubes Limited
Conduit Steel
SADDLES
Saddle, Hospital
Material: Finish: Size Box Qty
M362
Crampet, Steel
Material: Finish: Size Box Qty Steel Galvanised 20mm 25mm 100 100
F461
Saddle, Distance
Material: Finish: Size Box Qty Size Box Qty
M363
SCREWS
Zinc Plated, M4 Pan Head F645
Length: 6mm, 10mm, 12mm, 16mm, 20mm, 25mm Box Qty 100
F657
GASKETS
Rubber Gasket for Box, Small Circular F409
F441
R451
F410
14
BAR ON
Engineering
R261
Inches 3 x 3 x 112 3x3x2 3x3x3 4 x 3 x 112 4x3x2 4 x 4 x112 4x4x2 4x4x3 6 x 3 x 112 6x3x2 6x3x3 6 x 4 x 112 6x4x2 6x4x3 6 x 6 x 112 6x6x2 6x6x3 6x6x4 9 x 3 x 112 9x3x2 9x3x3 9 x 6 x 112 9x6x2 9x6x3 9x6x4 9x9x2 9x9x3 9x9x4 12 x 6 x 2 12 x 6 x 3 12 x 6 x 4 12 x 9 x 2 12 x 9 x 3 12 x 9 x 4 12 x 12 x 2 12 x 12 x 3 12 x 12 x 4 Pack Qty 10 10 6 10 10 10 10 6 6 6 6 6 6 6 6 6 4 2 6 6 6 4 4 4 2 2 2 1 2 2 2 2 1 1 2 1 1
A Division of Caparo Precision Tubes Limited
Flanged lids are fitted as standard to all boxes and are secured by M5 x 8mm mushroom head screws. The complete range is manufactured in accordance with BS 4568 Part 2. A range of Pre-Galvanised Adaptable Boxes are also available on request.
R262
15
BAR ON
Engineering
A Division of Caparo Precision Tubes Limited
Conduit-Flexible
(UNPACKED)
F561
6mm 10mm 12mm 16mm 20mm 25mm 32mm 40mm 50mm
Standard Coil lengths: 6mm - 32mm - 15 metre lengths 40mm & 50mm - 7.5 metre lengths
16
BAR ON
Engineering
A Division of Caparo Precision Tubes Limited
A comprehensive range of switch and socket boxes manufactured in four depths 16mm, 25mm, 35mm and 48mm and all available in one and two gang configurations. To facilitate the easy fitting of accessories into the boxes, they are designed with at least one adjustable lug.
Adjustable Lug
All Barton RE Series Switch and Socket Boxes include a unique Regulation Brass Earth Terminal into which several earth wires can be fitted from either the inside or outside of the box.
Each box is produced with a specified number and size of knock outs which allow adequate cable entries for wiring purposes. Nominal Dimensions: One Gang - 72mm x 72mm Two Gang - 132mm x 72mm Material: Pre-coated galvanised steel Barton switch and socket boxes are manufactured in accordance with BS 4662.
BC42RE
Gang Type of Entry Fixing Lugs Pack Qty. One 1 oval hole fitted 1 fixed and 20 Gang with rubber 1 adjustable grommet and 3 oval KOs for grommet entry
Gang Type of Entry Fixing Lugs Pack Qty. One 12 & 20mm 2 fixed and 10 Gang KOs 2 adjustable
Switch & Socket Boxes 47mm deep (For use with double thickness partitioning) BC22RE
Gang Type of Entry Fixing Lugs Pack Qty. Two 20 & 25mm 1 fixed and 5 Gang KOs 1 adjustable
17
BAR ON
Engineering
A Division of Caparo Precision Tubes Limited
QUICK-FIX
Turnbuckle lid fixing A simple 14 turn locks or unlocks the lid. Allows easy filling and removal, still providing secure fixing. Integral Couplers - Easy and quick attachment to trunking with no additional couplers necessary.
Good scraping earth Provides good earth continuity between body and lid, ensuring safety. Plunged and pierced tapped holes on couplers and fillings - Single screw fixing saves time - Fixing merely requires a screwdriver. Fixing screws supplied with each fitting No additional items to order. The turnbuckle can be used to secure lids on cut lengths of trunking. Return edge - Increased rigidity. Copper Earth Link available if required.
18
Quick-Fix Trunking
BAR ON
Engineering
A Division of Caparo Precision Tubes Limited
Dimensions (mm) 50 x 50 75 x 50 75 x 75 100 x 50 100 x 75 100 x 100 150 x 50 150 x 75 150 x 100 150 x150 225 x 100
CABLE TRUNKING (See note (1) below) QF/22 QF/32 QF/33 QF/42 QF/43 QF/44 QF/62 QF/63 QF/64 QF/66 QF/94
RIGHT ANGLE BEND TOP LID QF/RABT 22 QF/RABT 32 QF/RABT 33 QF/RABT 42 QF/RABT 43 QF/RABT 44 QF/RABT 62 QF/RABT 63 QF/RABT 64 QF/RABT 66 QF/RABT 94
RIGHT ANGLE BEND INSIDE LID QF/RABI 22 QF/RABI 32 QF/RABI 33 QF/RABI 42 QF/RABI 43 QF/RABI 44 QF/RABI 62 QF/RABI 63 QF/RABI 64 QF/RABI 66 QF/RABI 94
RIGHT ANGLE BEND OUTSIDE LID QF/RABO 22 QF/RABO 32 QF/RABO 33 QF/RABO 42 QF/RABO 43 QF/RABO 44 QF/RABO 62 QF/RABO 63 QF/RABO 64 QF/RABO 66 QF/RABO 94
Dimensions (mm) 50 x 50 75 x 50 75 x 75 100 x 50 100 x 75 100 x 100 150 x 50 150 x 75 150 x 100 150 x 150 225 x 100
45 DEGREE BEND TOP LID QF/FFT 22 QF/FFT 32 QF/FFT 33 QF/FW 42 QF/FFT43 QF/FFT 44 QF/FFT 62 QF/FW 63 QF/FFT 64 QF/FFT 66 QF/FFT 94
45 DEGREE BEND INSIDE LID QF/FFI 22 QF/FFI 32 QF/FW 33 QF/FFI 42 QF/FF143 QF/FFI 44 QF/FFI 62 QF/FFI 63 QF/FFI 64 QF/FFI 66 QF/FFI 94
45 DEGREE BEND OUTSIDE LID QFI/FFO 22 QF/FFO 32 QF/FFO 33 QF/FFO 42 QF/FFO 43 QF/FFO 44 QF/FFO 62 QF/FFO 63 QF/FFO 64 QF/FFO 66 QF/FFO 94
4 WAY BOX QF/FW 22 QF/FW 32 QF/FW 33 QF/FW 42 QF/FW 43 QF/FW 44 QF/FW 62 QF/FW 63 QF/FW 64 QF/FW 66 QF/FW 94
HANGER OF/H 22 OF/H 32 QF/H 33 QF/H 42 QF/H43 QF/H 44 QF/H 62 QF/H 63 QF/H 64 QF/H66 QF/H 94
(1) Cable Trunking - 3m length complete with lid and couplers. Product Code Example. QF/RABT 22. ie. Quick-Fix/Right Angle Bend Top 2 x 2.
19
BAR ON
Engineering
A Division of Caparo Precision Tubes Limited
Quick-Fix Trunking
Dimensions (mm) 50 x 50 75 x 50 75 x 75 100 x 50 100 x 75 100 x 100 150 x 50 150 x 75 150 x 100 150 x 150 225 x 100
TOP BEND TOP LID QF/TT 22 QF/TT 32 QF/TT33 QF/TT 42 QF/TT43 QF/TT44 QF/TT62 QF/TT63 QF/TT64 QF/TT66 QF/TT94
TEE BEND INSIDE LID QF/TI 22 QF/TI 32 QF/TI 33 QF/TI 42 QF/TI 43 QF/TI 44 QF/TI 62 QF/TI 63 QF/TI 64 QF/TI 66 QF/TI 94
TEE BEND OUTSIDE LID QF/TO 22 QF/TO 32 QF/TO 33 QF/TO 42 QF/TO 43 QF/TO 44 QF/TO 62 QF/TO 63 QF/TO 64 QF/TO 66 QF/TO 94
REDUCER 75 x 50 TO 50 x 50mm 75 x 75 TO 50 x 50mm 75 x 75 TO 75 x 50mm 100 x 50 TO 50 x 50mm 100 x 75 TO 50 x 50mm 100 x 100 TO 50 x 50mm 100 x 100 TO 75 x 75mm 150 x 100 TO 100 x 100mm 150 x 150 TO 100 x 100mm 150 x 150 TO 150 x 100mm QF/RED 32/22 QF/RED 33/22 QF/RED 33/32 QF/RED 42/22 QF/RED 43/22 QF/RED 44/22 QF/RED 44/33 QF/RED 64/44 QF/RED 66/44 QF/RED 66/64
Dimensions (mm) 50 x 50 75 x 50 75 x 75 100 x 50 100 x 75 100 x 100 150 x 50 150 x 75 150 x 100 150 x 150 225 x 100
STOP END QF/SE 22 QF/SE32 QF/SE 33 QF/SE 42 QF/SE 43 QF/SE 44 QF/SE 62 QF/SE 63 QF/SE 64 QF/SE 66 QF/SE 94
COUPLER QF/C 2 QF/C2 QF/C 3 QF/C2 QF/C 3 QF/C 4 QF/C 2 QF/C 3 QF/C 4 QF/C 6 QF/C 4
FLANGED COUPLER QF/FC 2 QF/FC 2 QF/FC 3 QF/FC 2 QF/FC 3 QF/FC 4 QF/FC 2 QF/FC 3 QF/FC 4 QF/FC 6 QF/FC 4
CABLE RETAINER QF/CRS 2 QF/CRS 3 QF/CRS 3 QF/CRS 4 QF/CRS 4 QF/CRS 4 QF/CRS 6 QF/CRS 6 QF/CRS 6 QF/CRS 6 QF/CRS 9
PIN RACK QF/PR 22 QF/PR 32 QF/PR 33 QF/PR 42 QF/PR 43 QF/PR 44 QF/PR 62 QF/PR 63 QF/PR 64 QF/PR 66 QF/PR 94
LOOSE SEPERATOR 3m LENGTHS QF/LS 2 QF/LS 2 QF/LS 3 QF/LS 2 QF/LS 3 QF/LS 4 QF/LS 2 QF/LS 3 QF/LS 4 QF/LS 6 QF/LS 4
Non gusset fittings and accessories are available. Hangers are available with 11 mm or 21mm holes.
20
Lighting Trunking
BAR ON
Engineering
A Division of Caparo Precision Tubes Limited
Dimensions (mm) 50 x 50
LIGHTING TRUNKING - BODY ONLY 3.5M long LT22/3.5 4.5M long LT22/4.5
Dimensions (mm) 50 x 50
Dimensions (mm) 50 x 50
21
BAR ON
Engineering
A Division of Caparo Precision Tubes Limited
Lighting Trunking
Dimensions (mm) 50 x 50
Dimensions (mm) 50 x 50
HANGER LT/H 22
Dimensions (mm) 50 x 50
22
Multi-Compartment Trunking
BAR ON
Engineering
A Division of Caparo Precision Tubes Limited
For 2 Compartment Trunking add QF/ -----/2 to the listed numbers on the previous pages.
For 2 Compartment Trunking add QF/ -----/3 to the listed numbers on the previous pages.
23
BAR ON
Engineering
A Division of Caparo Precision Tubes Limited
Barton Engineering Rose Street, Bradley, Bilston West Midlands WV14 8TS
Telephone: Fax: