Beruflich Dokumente
Kultur Dokumente
back.
The audio output must be set on the computer.
Please confirm the following while the unit is connected
to the computer.
If you make the following settings, sound will be output
through this unit, but no sound will be output by the
computers speakers or headphone jack.
Windows XP
1 Shut down all applications, and open the Control
Panel from the Start Menu.
2 Open Sounds and Audio Devices.
NOTE
If you cannot fnd the above item, click Sounds, Speech, and
Audio Devices and it will appear.
3 Click the Audio tab, and set the Default device: for
Sound playback and Sound recording to TASCAM
US-1800.
Windows Vista and Windows 7
1 Shut down all applications, and open the Control
Panel from the Start menu.
2 Open Sound.
NOTE
If the above item does not appear, click Hardware and
Sound and it will appear.
3 Click the Playback tab, right-click Speakers US-1800
and click the Set Default button.
Mac OS X
1 Shut down all applications and open System
Preferences from the Apple menu.
2 Open Sound.
3 From the Output tab, select US-1800: Output.
After completing the settings, restart the computer and
check the playback sound.
Depending on the application you are using, it might also
be necessary to make other device settings in addition to
those above.
In particular, since DAW (Digital Audio Workstation)
software operates using audio engines that are different
from the OS settings, confirm the DAW driver settings first
after installing the driver for this unit.
Please see the manual for the application that you are
using for detailed setting procedures.
For the bundled Cubase LE 5 software, see the manual on
the included DVD-ROM.
8 Troubleshooting
TASCAM US-1800 19
The sound breaks up or there is noise.