Beruflich Dokumente
Kultur Dokumente
Publication Date: October 2010. Publication Date: October 2010. Publication Date: October 2010. Publication Date: October 2010.
DIESEL SYSTEMS AUSTRALIA
HOTLINE: 1800 331 277 FAX: (03) 9553 4224
Page T2
All care has been taken in the compilation of this reference catalogue. DSA assumes no
responsibility for incorrect references, descriptions or sizing on products.
All illustrations are not necessarily an exact replica of parts.
Part numbers mentioned may not necessarily be standard stock items.
Our supplier guarantees the quality and manufacture of their articles. They do not guarantee
compensation for any other damages or charges. Defects or short supply of goods must be
reported to our supplier within 5 days of receipt of goods. Their guarantee only covers the
replacement of defective goods. They do not accept the return of goods that have been
incorrectly ordered.
To Order Call: 1800 331 277
Page T2
Page T3
Reamers & Millers Page T4
Electronic Equipment Page T7
Clamps Page T9
Wrenches Page T12
Test Adaptors Page T20
Pullers Page T23
Couplings Page T29
Brackets, Vices, Bearings Page T31
Other Tools / Parts Page T34
Kits Page T54
Notes Page T85
DIESEL SYSTEMS AUSTRALIA
Page T3
To Order Call: 1800 331 277
Page T4
Bosch (15mm) Flat Reamer
Flat reamer for cleaning the internal
seat of the engine where the flat
Common Rail Piezo Bosch nozzle
holders lie.
In Kit: CR 37-02
CR 37-15
Could use in place of;
Daily (19mm) Conical Reamer
Conical reamer for cleaning the internal
seat of the engine where the conical
Common Rail Daily nozzle holders lie
In Kit: CR 37-02
CR 37-16
Could use in place of;
Delphi (17mm) Flat Reamer
Flat reamer for cleaning the internal
seat of the engine where the flat
common rail Delphi nozzle holders lie.
In Kit: CR 37-01
CR 37-17
Could use in place of;
Audi / VW (18mm) Conical Reamer
Conical reamer for cleaning the internal
seat of the engine where injector-pump
Audi and Volkswagen lie.
In Kit: CR 37-02
CR 37-18
Could use in place of;
DIESEL SYSTEMS AUSTRALIA
Page T5
CR 37-19
Could use in place of;
CR 37-19A
Could use in place of;
CR 37-21
Could use in place of;
CR 37-21A
Could use in place of;
Bosch (19mm) Flat Reamer
Flat reamer for cleaning the internal
seat of the engine where the flat
common rail Bosch nozzle holders lie.
In Kit: CR 37-01
Mercedes (19mm) Flat Reamer
Flat reamer for cleaning the internal
seat of the engine where the common
rail nozzle holders with step lie. For
Nozzle Holders like Mercedes.
In Kit: CR 37-01
Bosch (21mm) Conical Reamer
Flat reamer for cleaning the internal
seat of the engine where the conical
Bosch common rail nozzle holders lie.
In Kit: CR 37-01
Bosch (21mm) Flat Reamer
Flat reamer for cleaning the internal
seat of the engine where the Tector
Bosch common rail nozzle holders lie.
In Kit: CR 37-02
Universal Pin
Universal pin for holding the three
reamers.
In Kit: CR 37-01
CR 37-0P
Could use in place of;
To Order Call: 1800 331 277
Page T6
EE 00-01
Could use in place of;
EE 01-01
Could use in place of;
EE 02-01
Could use in place of;
EE 03-01
Could use in place of;
Ultrasonic Cleaning Tank
Ultrasonic cleaning tank for rotative
pumps and turbo devices.
Vat capacity: 3.5L
U/S Power: 120/240 Watt
With heating power.
Ultrasonic Cleaning Tank
Ultrasonic cleaning tank for rotative
pumps and turbo devices.
Vat capacity: 6L
U/S Power: 120/240 Watt
With heating power.
Ultrasonic Cleaning Tank
Ultrasonic cleaning tank for rotative
pumps and turbo devices.
Vat capacity: 14L
U/S Power: 240/480 Watt
With heating power.
Multifrequency Cleaning Tank
Ultrasonic cleaning tank for rotative
pumps and turbo devices.
Vat capacity: 14L
U/S Power: 200 Watt
With heating power.
DIESEL SYSTEMS AUSTRALIA
Page T7
Nozzle Holder Tester
Tester for checking Bosch, Delphi,
Siemens and Denso, Electromagnetic
(Bobbin) or Piezoelectric (Piezo)
common rail nozzle holders.
CR 134-13
Could use in place of;
Diagnostic Tool Kit
This kit allows you to check the
pressure of common rail pumps (CP1,
CP3, Delphi and Siemens) without
dismounting the pump from the engine.
CR 134-278
Could use in place of;
Force Pickup
Force pick up with digital force
indicator.
Measures: 0 to 2500kg.
Use with: CR 313-CR
CR 313-CELL
Could use in place of;
0 986 612 997
To Order Call: 1800 331 277
Page T8
MAN Clamp
Tester clamp to be used to check the
operating and the flow of the common
rail MAN nozzle holder (with simulator
or hand injector tester.)
For Premium MAN 646, Common Rail
bus, Diam. 29mm.
Use with: CR 134-01.
CR 122-01
Could use in place of;
0 986 612 786
CR 122-02
Could use in place of;
CR 122-03
Could use in place of;
CR 309-02
Could use in place of;
Universal Clamp
Universal retaining clamp for mounting
and dismounting common rail injectors
with opening of 11, 12, 13 and 19mm.
For Bosch and Delphi injectors.
Universal Clamp for Volvo,
Ducato, BMW Injectors
Universal retaining clamp for mounting
and dismounting common rail injectors
with opening of 14, 16 and 20mm.
Universal Clamp
Universal retaining clamp for mounting
and dismounting common rail injectors
with opening of 15, 17, 18 and 22mm.
DIESEL SYSTEMS AUSTRALIA
Page T9
Renault Clamp
Tester clamp to be used to check the
operating and the flow of the common
rail Renault nozzle holder (with
simulator or hand injector tester.)
For Premium 420 C.V. Renault,
Common Rail bus, Diam. 32mm.
Use with: CR 134-01.
CR 309-04A
Could use in place of;
New Tector and Eurocargo Clamp
Tester clamp to be used to check the
operating and the flow of the common
rail Tector nozzle holder (with simulator
or hand injector tester).
With Quick Connection
Use with: CR 134-01.
CR 309-05N
Could use in place of;
Denso Clamp
Tester clamp to be used to check the
operating and the flow of the common
rail Denso nozzle holder (with simulator
or hand injector tester.)
Diam. 27mm.
Use with: CR 134-01.
CR 309-06
Could use in place of;
Denso Clamp
Tester clamp to be used to check the
operating and the flow of the common
rail Denso nozzle holder (with simulator
or hand injector tester.)
Diam. 23.5mm
Use with: CR 134-01.
CR 309-07
Could use in place of;
To Order Call: 1800 331 277
Page T10
CR 309-08
Could use in place of;
CR 309-09
Could use in place of;
MAN Clamp
Tester clamp to be used to check the
operating and the flow of the common
rail MAN nozzle holder (with simulator
or hand injector tester.)
For Premium MAN 646, Common Rail
bus, Diam. 26mm.
Use with: CR 134-01.
Volvo, Deutz, Renault Clamp
Tester clamp to be used to check the
operating and the flow of the common
rail Volvo, Deutz and Renault Premium
2 Generation nozzle holders (with
simulator or hand injector tester).
With Quick Connection. Diam. 28mm
Use with: CR 134-01.
DIESEL SYSTEMS AUSTRALIA
Page T11
CP3 Torx Wrench
Special Torx wrench for dismounting of
Common Rail CP3
CR 468-00
Could use in place of;
CP3 Inlet Connection Wrench
Wrench for inlet connection for CP3
pump.
CR 482-00
Could use in place of;
Bosch Nozzle Holder Wrench
Wrench for mounting and dismounting
Bosch common rail nozzle holder ring
nut (17x1mm)
Hex: 10mm
Hole: 6.5mm
CR 483-00
Could use in place of;
8120
Bosch Nozzle Holder Wrench
Wrench for mounting and dismounting
Bosch common rail nozzle holder ring
nut (17x1mm)
Hex: 10mm
Hole: 7.5mm
CR 483-GR
Could use in place of;
0 986 613 630
8120-A
To Order Call: 1800 331 277
Page T12
Page T13
CR 483-10TX
Could use in place of;
CR 498-00
Could use in place of;
8160-12
CR 491-00
Could use in place of;
YDT 220
8119
CR 499-00
Could use in place of;
Wrench for internal ring-nut CR
nozzle holder 3 gen.
Wrench for mounting and dismounting
internal ring-nut 10mm, torx, Bosch
Common Rail nozzleholders 3
generation
Tector Solenoid Wrench
Wrench for opening the solenoid of the
common rail Tector nozzle holder.
(12 sides, 28mm)
Delphi Nozzle Holder Wrench
Delphi: For Mondeo and Ford Transit
with Delphi nozzle holder system.
21mm.
Cap Wrench
Cap wrench with 3 holes for
dismounting rail Delphi ring nut.
DIESEL SYSTEMS AUSTRALIA
Page T13
29mm Nozzle Holder Wrench
Wrench for dismounting solenoid
common rail nozzle holders.
Hex: 29mm.
CR 500-00
Could use in place of;
8160-29
30mm Nozzle Holder Wrench
Wrench for dismounting solenoid
common rail nozzle holders.
Hex: 30mm.
CR 501-00
Could use in place of;
8160-30
15mm Open Dismounting Wrench
Open wrench with 1/2 connection. The
1/2 wrench allows the use with Bosch
CRI and CRIN.
CR 501-CR15
Could use in place of;
17mm Open Dismounting Wrench
Open wrench with 1/2 connection. The
1/2 wrench allows the use with Bosch
CRI and CRIN.
CR 501-CR17
Could use in place of;
To Order Call: 1800 331 277
Page T14
CR 501-CR19
Could use in place of;
CR 501-CR27
Could use in place of;
CR 501-CR29
Could use in place of;
CR 501-CR30
Could use in place of;
19mm Open Dismounting Wrench
Open wrench with 1/2 connection. The
1/2 wrench allows the use with Bosch
CRI and CRIN.
27mm Open Dismounting Wrench
Open wrench with 1/2 connection. The
1/2 wrench allows the use with Bosch
CRI and CRIN.
29mm Open Dismounting Wrench
Open wrench with 1/2 connection. The
1/2 wrench allows the use with Bosch
CRI and CRIN.
30mm Open Dismounting Wrench
Open wrench with 1/2 connection. The
1/2 wrench allows the use with Bosch
CRI and CRIN.
DIESEL SYSTEMS AUSTRALIA
Page T15
32mm Open Dismounting Wrench
Open wrench with 1/2 connection. The
1/2 wrench allows the use with Bosch
CRI and CRIN.
CR 501-CR32
Could use in place of;
VW Bush Wrench
Bush wrench for mounting and
dismounting the bracket for UIS nozzle
holders and pumps.
CR 492-00
Could use in place of;
0 986 612 747
T10054
8610-L
Register Wrench for DP200
Register Wrench
CR 6408-80A
Could use in place of;
6408-80A
Restraint Wrench
Torque converter fixing wrench with
12mm slide.
CR 2885-00
Could use in place of;
KDEP 2906,
0 986 611 211
To Order Call: 1800 331 277
Page T16
Page T17
CR 439-02
Could use in place of;
CR 448-00
Could use in place of;
CR 451-00
Could use in place of;
CR 493-00
Could use in place of;
Female CAT Wrench
Wrench for dismounting Caterpillar
pump connection. (2S7264 1P3)
Mercedes MAN Long Wrench
Long wrench for Mercedes / MAN with
4 teeth and puller. It allows you to pull
out the nozzle holder automatically.
Mercedes Toothed Wrench
Toothed wrench for dismounting
Mercedes nozzle holders with
electronic adjustment. It avoids further
breakages of cables and sensors.
VP Wrench
Toothed wrench for mounting and
dismounting the head plunger for VP
pumps. Its shape avoids breakages
when utilized
DIESEL SYSTEMS AUSTRALIA
Page T17
Rover Wrench
Wrench for mounting and dismounting
the nut for Rover injector pumps.
To be used with the 4 included pins.
CR 494-00
Could use in place of;
8149
Solenoid Octagonal Wrench
Octagonal wrench for mounting and
dismounting the solenoid for Bosch /
Iveco injector pumps.
CR 495-00
Could use in place of;
0 986 613 239
8147
Delphi Volvo Wrench
Wrench for mounting and dismounting
the injector pump fixing nut on the new
Delphi Volvo 500Hp nozzle holder.
CR 496-00
Could use in place of;
8148
37mm Solenoid Dismounting
Wrench
37mnm Hex. wrench for dismounting
the solenoid on VW and Audi A6 pump
injectors.
For pump injectors: 0414 720 029,
0414 720 215
CR 502-00
Could use in place of;
To Order Call: 1800 331 277
Page T18
Denso Dismounting Wrench
Dismounting wrench for internal ring-
nuts of Denso nozzle holders.
CR 503-00
Could use in place of;
CR 504-00
Could use in place of;
CR 509-00
Could use in place of;
CR 508-00
Could use in place of;
Nut Dismounting Wrench
Wrench for dismounting the nut on VW
and Audi A6 pump injectors.
For pump injectors: 0414 720 404.
Solenoid Dismounting Wrench
Wrench for dismounting the solenoid on
VW and Audi A6 pump injectors.
For pump injectors: 0414 720 404.
MAN Solenoid Wrench
Wrench for opening the solenoid of the
common rail MAN nozzle holder
(27mm)
DIESEL SYSTEMS AUSTRALIA
Page T19
Scania Test Adaptor
Test adaptor to check the injector of
EUI / PDE Scania pumps.
To be used on all standard pop testers.
Thread: 31 x 1mm
UIT 4-03
Could use in place of;
8126
Iveco Test Adaptor
Test adaptor to check the injector of
EUI / PDE Iveco pumps.
To be used on all standard pop testers.
Thread: 28 x 1mm
UIT 4-04
Could use in place of;
8125
Volvo Test Adaptor
Test adaptor to check the injector of
EUI / PDE Volvo pumps.
To be used on all standard pop testers.
Thread: 28 x 1mm Transversal Hole
UIT 4-05
Could use in place of;
8127
Volvo Test Adaptor
Test adaptor to check the injector of
EUI / PDE Volvo pumps.
To be used on all standard pop testers.
Thread: 31 x 1mm
UIT 4-08
Could use in place of;
8128
To Order Call: 1800 331 277
Page T20
UIT 4-09
Could use in place of;
8144
UIT 4-11
Could use in place of;
8129
UIT 4-12
Could use in place of;
8141
UIT 4-13
Could use in place of;
8145
Caterpillar Test Adaptor
Test adaptor to check the injector of
EUI / PDE Caterpillar pumps.
To be used on all standard pop testers.
Thread: 28 x 1mm
Volkswagen Test Adaptor
Test adaptor to check the injector of
EUI / PDE Volkswagen pumps.
To be used on all standard pop testers.
Land Rover Test Adaptor
Test adaptor to check the injector of
EUI / PDE Land Rover pumps.
To be used on all standard pop testers.
Detroit Test Adaptor
Test adaptor to check the injector of
EUI / PDE Detroit pumps.
To be used on all standard pop testers.
DIESEL SYSTEMS AUSTRALIA
Page T21
Cummins Test Adaptor
Test adaptor to check the injector of
EUI / PDE Cummins L10-M11 pumps.
To be used on all standard pop testers.
UIT 4-14
Could use in place of;
Cummins Test Adaptor
Test adaptor to check the injector of
EUI / PDE Cummins N14 pumps.
To be used on all standard pop testers.
UIT 4-15
Could use in place of;
8146
Volvo 520CV Test Adaptor
Test adaptor to check the injector of
EUI / PDE Volvo 520 CV pumps.
To be used on all standard pop testers.
UIT 4-16
Could use in place of;
To Order Call: 1800 331 277
Page T22
Page T23
CR 233-01
Could use in place of;
CR 233-02
Could use in place of;
INJECTOR
PULLER
Could use in place of;
8098
BMW Puller
Pulley Extractor BMW 520 tds and
320D VP M47 with dial 35x2mm.
To pull and keep the distribution fixed.
BMW Puller
Pulley Extractor BMW 320 150 CV and
320D VP 130 CV with dial 35x2mm.
To pull and keep the distribution fixed.
Injector Puller
Adjustable Extractor for Common Rail
injectors on Fiat, Alfa, Lancia.
DIESEL SYSTEMS AUSTRALIA
Page T23
CR 247-01
Could use in place of;
0 986 612 728
Mercedes Puller
Puller for Common Rail Mercedes class
A injector.
No Beater.
Use with: CR 247-BAT.
Iveco Tector Puller
Nozzle holder extractor for Common
Rail Iveco Tector . With Blow Puller.
IVECO PULLER
Could use in place of;
Mercedes Injector Puller
Extractor for Common Rail Mercedes
injectors . With Blow Puller.
MERC PULLER
Could use in place of;
0 986 612 727
0 986 612 728
8099-A
Tector Injector Puller
Nozzle holder extractor for Common
Rail Iveco Tector .
No Beater.
Use with: CR 247-BAT.
CR 247-02N
Could use in place of;
Bosch Puller
Common Rail nozzle holder puller for
Bosch.
Thread: 27x1mm.
CR 247-04
Could use in place of;
To Order Call: 1800 331 277
Page T24
CR 247-04A
Could use in place of;
8096-A
DOUBLE PULLER
Could use in place of;
8099-M
SPRINTER
PULLER
Could use in place of;
8099-F
OIL SEAL
PULLER
Could use in place of;
8172
Internal Puller for Nozzle
Holders
Puller for common rail nozzle holder.
Size: 17 x 1mm
Double Puller
Sliding hammer puller for Bosch
common rail double nozzle holders for
Class A Mercedes.
It allows you to pull out the nozzle
holder fixed bracket.
Sprinter Puller
Special sliding hammer for dismounting
Sprinter injectors.
Especially designed to pull out the
injector when there is a reduced
working space.
Oil Seal Puller for VP-CP3
Oil seal self-threading puller for VP and
CP3 Pumps.
It allows you to dismount the oil seals
without opening / pulling out the pump.
Size: 25mm
DIESEL SYSTEMS AUSTRALIA
Page T25
Delphi Pump Pulley Extractor
Pulley extractor for Common Rail
Delphi pumps on Kia, Hyundai engines.
PULLEY
EXTRACTOR
Could use in place of;
Eurocargo Blow Puller
Common Rail blow puller for
Eurocargo.
CR 247-0S
Could use in place of;
Beater for Puller
Universal beater for puller.
Thread 12x1.5mm
CR 247-BAT
Could use in place of;
Renault and Opel Mavano Pump
Puller
Pump puller and stroke holding for
Renault Espace 2.2 CR and Opel
Movano.
CR 260-00
Could use in place of;
8161
To Order Call: 1800 331 277
Page T26
GOV PULLER
Could use in place of;
RING
EXTRACTOR
Could use in place of;
COUPLING
PULLERS
Could use in place of;
SIEMENS
PULLER
Could use in place of;
Governor Puller for CP3
CP3 Common Rail Governor Puller.
Nozzle Holder Fibre Ring
Extractor
Fibre ring extractor for Bosch Nozzle
Holders.
Universal Pullers for VP
Couplings
Couple of high resistant pullers for
extracting the couplings on 11 kinds of
VP pumps.
Siemens Puller
Puller for Siemens Common Rail
Nozzle Holders. 25 x 1mm.
To be used with PE 226-00
DIESEL SYSTEMS AUSTRALIA
Page T27
Denso Puller
Puller for Common Rail Denso Nozzle
Holders. 25x0.5mm.
To be used with PE 226-00.
DENSO PULLER
Could use in place of;
Fiat, Peugeot, Citroen Puller
Nozzle Holder extraction puller to suit
Fiat Ulisse, Peugeot 807 and Citroen
Evasion . It has 2 adaptable legs to suit
the models. Especially designed to pull
out the injector when there is a reduced
working space.
CR 247-11
Could use in place of;
Fiat Ducato Puller
Tool to extract the Fiat Ducato 2.2 JTD
nozzle holder from the engine.
Especially designed to pull out the
injector when there is a reduced
working space.
CR 247-08
Could use in place of;
VW Sliding Hammer Puller
Sliding hammer puller for VW injector
pump.
VW PULLER
Could use in place of;
0 986 612 750
To Order Call: 1800 331 277
Page T28
CR 025-VP
Could use in place of;
CR 029-VP
Could use in place of;
CR 103-VP
Could use in place of;
CR 130-00
Could use in place of;
Motoring Coupling Cone for VP
and CP3 Pumps.
25mm motoring coupling cone for VP
and CP3 pumps.
VP Motoring Coupling
29mm Motoring coupling cone for VP
Ford Transit.
It allows you to check the pump on the
bench without pulling out the original
motoring coupling.
VP Motoring Coupling
44mm Motoring coupling 4 holes cone
for John Deere.
It allows you to check the pump on the
bench without pulling out the original
motoring coupling.
John Deere Motoring Coupling
Motoring coupling 4 holes for John
Deere.
It allows you to check the pump on the
bench without pulling out the original
motoring coupling.
DIESEL SYSTEMS AUSTRALIA
Page T29
Motoring Coupling for
Mercedes, Siemens
Motoring coupling for testing Mercedes
and Siemens common rail pumps on
Test Bench.
8mm Key, 12mm Tooth.
CR 131-CR8
Could use in place of;
8151
Motoring Coupling for Fiat
Multijet
Motoring coupling for testing Fiat
Multijet common rail pumps on Test
Bench.
9mm Key, 12mm Tooth.
CR 132-CR9
Could use in place of;
8152
To Order Call: 1800 331 277
Page T30
VT 000-04A
Could use in place of;
VT 134-0A
Could use in place of;
8132
Delphi Test Bench Flange
Flange for test bench to test Delphi
pumps with 2 holes.
To be used with VT 003-00 or with
original Bosch bracket.
Swivel Vice Basement
Universal Type Swivel Vice basement
with holes for fixing for operative
flanges.
DIESEL SYSTEMS AUSTRALIA
Page T31
Swivel Vice for CP Pumps
Swivel Vice for dismounting and
mounting radial-jet pumps.
Delphi Flange Vice
Flange for Vice to mount and dismount
common rail Delphi pumps. 2 Holes.
To be used with VT 134-CR
VT 134-CR
Could use in place of;
VT 000-04C
Could use in place of;
Bracket for CP1 Common Rail
Pumps
Bracket for dismounting and mounting
common rail pumps.
To be used with VT 134-0A.
VT 001-00
Could use in place of;
8130
Adapting Plate for CP3
Adapting plate for mounting and
dismounting CP3 Pumps.
To be used with our VT 001-00
VT 001-01
Could use in place of;
8131
Bracket for CP3 Pumps for Test
Bench
Bracket with increased thickness to be
used on test bench and on normal
working surface.
Diameter: 50mm
VT 001-02
Could use in place of;
CP3 Mercedes Bracket with
Ring
Bracket with ring for test bench to test
common rail CP3 Mercedes pumps.
To be used with VT 003-00 or original
Bosch bracket.
VT 001-03
Could use in place of;
To Order Call: 1800 331 277
Page T32
VT 000-04B
Could use in place of;
VT 000-05
Could use in place of;
9478-T
VT 003-00
Could use in place of;
1 688 010 124
9680-A
Delphi Flange with Loop Holes
Common rail Delphi flange with loop
holes.
VE Opel Flange
Flange for VE Opel VP44.
ISO Bosch Bracket
New bracket for Bosch Test Bench ISO
4008-1 normative.
DIESEL SYSTEMS AUSTRALIA
Page T33
Nissan Bracket for Test Bench
Bracket to mount on the test bench
Nissan Dualis common rail pump.
CR 002-CR
Could use in place of;
Comparator Bearing
Comparator bearing with 2 fixing parts
for common rail nozzle holders
Sizes: 17 and 19mm
Used in kit: CR 006-KIT
CR 006-CR
Could use in place of;
Digital Millesimal Comparator
Digital millesimal comparator, stroke 0-
15mm.
Used in kit: CR 006-KIT
CR 006-MIL
Could use in place of;
To Order Call: 1800 331 277
Page T34
CR 34-23
Could use in place of;
0 986 611 481
Injector Positioning Spinning
Device
Spinning device to allow the right
position / seat of the common rail
injectors in the engine.
CR 34-06
Could use in place of;
8121
YDT220
CR 128-218
Could use in place of;
CR 1085-02
Could use in place of;
1 688 130 237
CR 1088-02
Could use in place of;
0 986 611 761
KDEP1088-2
Stroke Device for Delphi Nozzle
Holders
Stroke device for Delphi nozzle holder
during its positioning on the engine.
Dismounting tool for VP Pump
Duratorq
Dismounting and mounting tool for VP
pumps on Ford Duratorq 2.0, 2.2 and
2.4 engines.
Gauge Bearing EDC, VE
Gauge bearing for VP44.
Thread: 10 x 1mm.
.
Threaded Pins For Comparator
Spare threaded pins for comparator
terminal.
Thread 2mm and 3mm, length 10mm.
DIESEL SYSTEMS AUSTRALIA
Page T35
Steel Brush
Steel brush for cleaning holes.
Brush Head: 25mm.
CR 34-14
Could use in place of;
Lens with Lamp
To visualize the holding ball valve and
all the little parts of the common rail
injectors.
Enlargement X10.
CR 503-03
Could use in place of;
Adaptor for pressure-Delphi
Connector for the sensor of transfer
pressure for common rail Delphi
pumps.
CR 34-07
Could use in place of;
Adaptor for pressure-CP3
Connector for the sensor of transfer
pressure for common rail CP3 pumps.
CR 34-08
Could use in place of;
To Order Call: 1800 331 277
Page T36
CR 34-09
Could use in place of;
CR 34-09A
Could use in place of;
CR 34-15
Could use in place of;
CR 34-16
Could use in place of;
Rapid connection for CR nozzle
holders
Rapid connection for all kinds of
common rail nozzle holders. Diameter
6.5mm.
To be used on test bench with common
rail simulator tester.
Rapid connection for CR nozzle
holders
Rapid connection for all kinds of
common rail nozzle holders. Diameter
9mm.
To be used on test bench with common
rail simulator tester.
Adaptor for pressure-CP1H/CP3
Connector for the sensor of transfer
pressure for common rail CP1H/CP3
pumps.
Adaptor for pressure-Siemens
Connector for the sensor of transfer
pressure for common rail Siemens
pumps.
DIESEL SYSTEMS AUSTRALIA
Page T37
Adaptor for pressure-Denso
Connector for the sensor of transfer
pressure for common rail Denso
pumps.
CR 34-17
Could use in place of;
Siemens High Pressure
Reduction
Reduction for high pressure pipe on
Siemens pumps.
CR 34-18
Could use in place of;
Siemens Pressure Governor
Adaptor
Adaptor for pressure governor for
Bosch Siemens pumps.
CR 34-19
Could use in place of;
Pressure Adaptor Sensor
Adaptor for sensor of pressure for
Bosch Siemens pumps.
CR 34-20
Could use in place of;
To Order Call: 1800 331 277
Page T38
CR 007-20
Could use in place of;
CR 007-21
Could use in place of;
CR 34-00
Could use in place of;
0 986 612 200
CR 34-01
Could use in place of;
0 986 612 201
Gauge 0-10bar
Manometer 0-10bar for checking the
fuel pressure of common rail.
Gauge 0-6bar
Manometer 0-6bar for checking the fuel
pressure of common rail.
CP1 Connection Inserter
Pressing in tool for low pressure
connection on common rail CP1 high
pressure pumps.
CP1 Iveco Connection Inserter
Pressing in tool for low pressure
connection on common rail CP1 high
pressure pumps.
DIESEL SYSTEMS AUSTRALIA
Page T39
Renault Connection Inserter
Pressing in tool for low pressure
connection on common rail CP1 high
pressure pumps.
CR 34-02
Could use in place of;
0 986 612 205
CP Pump Inserter Bracket
Inserting tool parts kit for the bracket
rotary shaft seal on the common rail
high pressure CP1 and CP3 pumps.
CR 34-03
Could use in place of;
0 986 612 422
Head Cover Screws
Couple of screws to centre the head
cover. For CP1 common rail high
pressure pumps.
CR 34-04
Could use in place of;
Device for Mounting the ORing
For mounting the oring on the pressure
control valve with filter on common rail
systems.
CR 34-05
Could use in place of;
0 986 612 787
To Order Call: 1800 331 277
Page T40
CR 128-219
Could use in place of;
PI-9045/1
Could use in place of;
PI-9045
Could use in place of;
PI-9044/5A
Could use in place of;
VP Ford Transit Flywheel Pin
Pin for flywheel on Ford Transit VP and
common rail.
Connector
Adaptor for back leak of Bosch,
Siemens and Denso nozzle holders.
Connector
Adaptor for back leak on nozzle
holders.
ORing
Oring to suit PI-9045 and PI-9045/1
Fittings.
DIESEL SYSTEMS AUSTRALIA
Page T41
4 Way Connection
4mm, 4 Way Waste Plastic Connection.
CMR151
Could use in place of;
3 Way Connection
4mm, 3 Way Waste Plastic Connection.
CMR151/2
Could use in place of;
Connector
Adaptor for back leak on PSA Siemens
nozzle holders.
CMR151/23
Could use in place of;
Connector
Adaptor for back leak on Siemens
nozzle holders.
CMR151/25
Could use in place of;
To Order Call: 1800 331 277
Page T42
CMR151/29
Could use in place of;
CMR151/30
Could use in place of;
CMR263
Could use in place of;
CMR263/5
Could use in place of;
Connector
Adaptor for back leak on Siemens
nozzle holders.
Connector
Adaptor for back leak on Delphi nozzle
holders.
Low Pressure Textile Hose
Size: 3.2 x 7 (Pack 50metres)
Low Pressure Textile Hose
Size: 3 x 7 (Pack 20metres)
DIESEL SYSTEMS AUSTRALIA
Page T43
Clip
CMR150/13
Could use in place of;
Clip
Suit 5WS40148-Z Euro 3, 5WS40149-Z
euro 4
CMR151/5
Could use in place of;
11800-001-012Z
Clip
Suit 5WS40156-4Z class 4, 5WS40156-
Z class 5
CMR151/10
Could use in place of;
11800-001-002Z
Clip
Suit 5WS40000-Z
CMR151/15
Could use in place of;
11800-001-003Z
To Order Call: 1800 331 277
Page T44
CMR814
Could use in place of;
CMR991/4
Could use in place of;
CMR914/10
Could use in place of;
CMR950/18
Could use in place of;
Viton ORing
Suit CP1H (0 440 020 060) Citroen,
Peugeot, Ford, Mazda, Kia
Viton ORing
Suit CP1S, CP1K Valve 0 928 400 366,
0 928 400 323
Viton ORing
Suit Siemens Valve
Viton ORing
Suit Siemens Secure Valve
DIESEL SYSTEMS AUSTRALIA
Page T45
Viton ORing
Suit Siemens Secure Valve
CMR000/5
Could use in place of;
Viton ORing
Suit Siemens Secure Valve
CMR910
Could use in place of;
Viton ORing
DRV on Flaute BMW Bosch Common
Rail (0 445 214 030)
CMR888
Could use in place of;
Viton Linenized Oil Seal
Suit Siemens & CP3
Size: 32 x 20 x 7mm
CMR937/5
Could use in place of;
F 00R 0P0 890
F 00N 202 338
F 00N 201 618
To Order Call: 1800 331 277
Page T46
CMR949/35
Could use in place of;
5ws40273
CMR937/10
Could use in place of;
F 00N 200 088
CMR949
Could use in place of;
2 440 281 012
CMR940/10
Could use in place of;
F 00R 0P1 535
Viton Oil Seal
Suit Siemens
Size: 33 x 22 x 7.3mm
Double Linenized Viton Oil Seal
Suit CP3 Toyota d4d BH (0 445 010
105,134,113,112)
Size: 32 x 20 x 7mm
Viton Oil Seal
Suit CP3 Fuel Pump
Size: 18.8 x 10 x 5.2mm
Viton Oil Seal
Suit CP 3 (0 445 010 043 Volvo)
Size: Double Seal
DIESEL SYSTEMS AUSTRALIA
Page T47
Viton Linenized Oil Seal
Suit Delphi, Ford, Renault, Nissan, Kia,
Hyundai
Size: 32 x 20 x 6mm
CMR949/5
Could use in place of;
9307-401A
Viton Oil Seal
Suit Denso HP2
Size: 38 x 25 x 6.5mm
CM940/15
Could use in place of;
097397-0010
Viton Linenized Oil Seal
Suit Delphi, Ford
Size: 33 x 20 x 6mm
CMR949/10
Could use in place of;
9307-402A
Oil Seal
Suit Siemens & CP3
Size: 31 x 20 x 7.3mm
CMR947
Could use in place of;
F 00R 0P0 253
F 00N 201 517
To Order Call: 1800 331 277
Page T48
CMR949/15
Could use in place of;
9307/408A
CMR948
Could use in place of;
F 00R 0P0 669
F 00N 202 337
CMR948/6
Could use in place of;
F 00R 0P0 521
CMR949/20
Could use in place of;
9307-410A
9307-409A
Viton Linenized Oil Seal
Suit Delphi, Ford
Size: 34.5 x 22.5 x 6mm
Viton Linenized Oil Seal
Suit CP3
Size: 37 x 25 x 7mm
Viton Linenized Oil Seal
Suit CP3
Size: 36 x 25 x 7.3mm
Viton Linenized Oil Seal
Suit Delphi, Ford
Size: 35.5 x 22.5 x 6mm
DIESEL SYSTEMS AUSTRALIA
Page T49
Common Rail Bush
Bush
Size: 17/19
CR 1-00
Could use in place of;
Common Rail Bush
Bush
Size: 20/22
CR 2-00
Could use in place of;
Common Rail Bush
Bush
Size: 24/26
CR 3-00
Could use in place of;
Common Rail Bush
Bush CP3
Size: 19x17x17mm
CR 4-00
Could use in place of;
To Order Call: 1800 331 277
Page T50
CR 5-00
Could use in place of;
CR 6-00
Could use in place of;
CR 7-00
Could use in place of;
CR 313-CR
Could use in place of;
0 986 613 400
0 986 613 500
Common Rail Bush
Bush CP3
Size: 22x22x20mm
Common Rail Bush
Bush CP3
Size: 25x30x25mm
Common Rail Bush
Bush CP3
Size: 33x30x25mm
Tool to Mount and Dismount
Nozzle Holders.
Tool for mounting and dismounting all
kinds of common rail and UI-P nozzle
holders
DIESEL SYSTEMS AUSTRALIA
Page T51
Plates
Plates to transform original Bosch 0
986 613 400 in common rail.
In tool kit: CR 313-CR
CR 313-CR500
Could use in place of;
0 986 613 500
Common Rail Bush
Bush to fix pulverizer to dismount and
mount common rail nozzle holders and
unit injectors on Volkswagens.
Size: 7mm
Included in kit: CR 313-CR
CR 313-CR01
Could use in place of;
Common Rail Bush
Bush to fix pulverizer to dismount and
mount common rail unit injectors on
Volkswagens.
Size: 7mm with step
Included in kit: CR 313-CR
CR 313-CR417
Could use in place of;
0 986 613 417
Common Rail Bush
Bush to fix pulverizer to dismount and
mount common rail nozzle holders and
unit injectors.
Size: 9mm
Included in kit: CR 313-CR
CR 313-CR02
Could use in place of;
To Order Call: 1800 331 277
Page T52
CR 34-27
Could use in place of;
YDT346
CR 134-10BIC
Could use in place of;
Delphi Tappet Rolls Pliers
Couple of pliers to push the tappet rolls
on common rail Delphi pumps.
Buretta
Buretta for our common rail nozzle
holder back leak kits.
Suit: CRBLT 341 and CRBLT 134-
12CR.
DIESEL SYSTEMS AUSTRALIA
Page T53
Reamers Kit (Includes 4 Reamers)
Tool Kit for cleaning the internal side of
the engine.
For Delphi and Bosch flat and conical
Common Rail nozzle holders.
CR 37-01
Could use in place of;
Nozzle Holder Reamer Kit (4 Reamers)
Tool Kit for cleaning the internal side of
the engine.
For Bosch, Daily, Audi, Volkswagen,
Tector & MAN.
CR 37-02
Could use in place of;
Fiat / Iveco Reamer Tool Kit
Reamer tool kit with conical miller and
shimming aluminum washers for nozzle
holder copper cases on Fiat-Iveco.
CR 21-00
Could use in place of;
9000
Fiat / Transit Reamer Tool Kit
Tool Kit with reamer for nozzle holder
copper cases on Fiat Ducato T.D., Fiat
Daily, Fiat Croma and Ford Transit.
CR 21-01
Could use in place of;
9000-A
To Order Call: 1800 331 277
Page T54
CR 21-02
Could use in place of;
CR 40-00
Could use in place of;
9700-CR
CR 501-01
Could use in place of;
CR 501-03
Could use in place of;
Iveco Reamer Tool Kit
Reamer tool kit with 5 millers with
different diameters for Iveco 115-17,
50NC-90NC and Volvo, MAN.
Lapping Tool Kit
Kit for lapping the seat of the closing
valve ball for the common rail injectors.
The kit also enables you to rebuild the
seat of the conic seat of the closing
valve positioned under the common rail
injector solenoid.
Torx Kit
Kit of multi usage torx wrench
screwdrivers.
With 7 torx wrenches to use as
wrenches and screwdrivers.
Dimensions from T10 to T40.
Cam-Car Kit
Kit of Cam-car wrenches, 5 pins.
Dimensions from T10 to T45.
DIESEL SYSTEMS AUSTRALIA
Page T55
Comparator Bearing Kit
Comparator bearing with 2 fixing parts
for common rail nozzle holders.
CR 006-KIT
Could use in place of;
Lapping Paste Kit
Lapping paste kit to clean injectors.
Composed of 3 different grains, 400,
600 & 800 Microns as well as 1 pot of
chrome.
These pastes are to clean the emery-
polishing, while the chrome is for
polishing.
CR 156-KIT
Could use in place of;
Kit of 3 Bushes
Kit of 3 bushes to fix pulverizer to
dismount and mount common rail
nozzle holders and unit injectors.
Sizes: 7mm, 9mm & 7mm with step.
CR 313-CR
Could use in place of;
4 Wrench Kit
Special wrenches to dismount common
rail Delphi DFP3 pumps.
Sizes: 20mm, 25mm, 30mm, 40mm
CR 700-00
Could use in place of;
To Order Call: 1800 331 277
Page T56
CR 501-CR
Could use in place of;
CR 514-03
Could use in place of;
8115
CR 128-22
Could use in place of;
0 986 612 427
8133
CR 128-23
Could use in place of;
Dismounting Wrench Kit (6pcs)
Kit composed of 6 open wrenches. The
1/2 hexagon shaped wrench allows the
employment with Bosch systems CRI
and CRIN.
Sizes: 15,17,19,27,29 and 30mm.
Kit of 3 Tools for Stroke BMW
330-320
BMW Stroke holder with double
camshaft.
Tappet Lifters CP3 Kit
Tappet lifter kit for dismounting CP3
pumps; made up of three tappet lifters.
Kit for Common Rail Stroke Pins
Kit of pins to be used directly on the
engine, for the engine pumps stroke on
common rail Renault.
DIESEL SYSTEMS AUSTRALIA
Page T57
Adjusting Kit for CP3
Adjusting tool kit for CP3 pumps; made
up of 6 inserting tools.
For inserting and positing of the
keeping rings.
CR 128-24
Could use in place of;
0 986 612 841,
0 986 612 942,
0 986 612 943,
0 986 612 844,
0 986 612 845,
0 986 612 846.
8171
Inox Anti Magnetic Pliers Kit
Set of 2 pliers for mounting and
dismounting little parts off common rail
injectors (eg. Spacers, pointers, balls
etc)
CR 34-24
Could use in place of;
CP3 Pump Tool Kit
Tool Kit equipped for mounting and
dismounting bearings for the radial-jet
pump.
Included in kit are 5 spare bearings.
CR 18-02
Could use in place of;
Tool Kit for CP1 Pumps
Tool Kit equipped for mounting and
dismounting bearings for the radial-jet
pumps.
Included in kit are 5 spare bearings.
CR 18-01
Could use in place of;
To Order Call: 1800 331 277
Page T58
CR 128-25
Could use in place of;
8173
CR 26-03
Could use in place of;
CR 44-00
Could use in place of;
CR 100-00
Could use in place of;
Kit of mounting sleeves for CP3
Kit of mounting sleeves to make easier
the mounting operations of OR and
shaft on CP3 pumps.
Formed by 7 parts.
Feeding Kit
Couple of connections and plate for
Mercedes common rail.
Fiber Ring Inserter Kit
Kit of tools to extract and replace the
fibre ring on common rail nozzle
holders. The kit comprises of a puller,
inserter and a positioning device.
Holding Ball Power Tester
To check the holding ball power of the
valve, where there is a seat of the ball
on Bosch common rail nozzle holders.
Tester is composed of a vacuum tester,
a special support.
DIESEL SYSTEMS AUSTRALIA
Page T59
Pointers Kit
Diam: 5.90 mm
Thickness: 8.40 - 8.50 mm (11 sizes)
Cu: each 0.01 mm
Box: 10 pcs x thickness
Total: 110 pcst
CRPT-A
Could use in place of;
Pointers Kit
Diam: 5.80 mm
Thickness : 8.40 - 8.50 mm (11 sizes)
Cut: each 0.01 mm
Box: 10 pcs x thickness
Total: 110 pcs
CRPT-B
Could use in place of;
Pointers Kit
Diam: 5.80 mm
Thickness: 8.50 - 8.70 mm (21 sizes)
Cut: each 0.01 mm
Box: 10 pcs x thickness
Total: 210 pcs
CRPT-C
Could use in place of;
Pointers Kit
Diam: 5.90 mm
Thickness: 8.50 - 8.70 mm (21 sizes)
Cu: each 0.01 mm
Box: 10 pcs x thickness
Total: 210 pcst
CRPT-D
Could use in place of;
To Order Call: 1800 331 277
Page T60
CRSP-A
Could use in place of;
CRSP-B
Could use in place of;
CRSP-C
Could use in place of;
CRSP-D
Could use in place of;
Injector Spacers Kit
Diam: 2.25 mm
Thickness: 1.14 - 1.25 mm (12 sizes)
Cut: each 0.01 mm
Box: 10 pcs x thickness
Total: 120 pcs
Injector Spacers Kit
Diam: 2.25 mm
Thickness: 0.95 - 1.13 mm (19 sizes)
Cut: each 0.01 mm
Box: 10 pcs x thickness
Total: 190 pcs
Injector Spacers Kit
Diam: 9.20 mm
Thickness: 1.11 - 1.47 mm (19 sizes)
Cut: each 0.02 mm
Box: 10 pcs x thickness
Total: 190 pcs
Injector Spacers Kit
Diam: 7.30 mm
Thickness: 1.00+1.01 - 1.45 mm (24
sizes)
Cut: each 0.02 mm
Box: 10 pcs x thickness
Total: 240 pcs
DIESEL SYSTEMS AUSTRALIA
Page T61
Injector Spacers Kit
Diam: 5.50 mm
Thickness: 1.00+1.01 - 1.45 mm (24
sizes)
Cut: each 0.02 mm
Box: 10 pcs x thickness
Total: 240 pcs
CRSP-D
Could use in place of;
Solenoid Washer Kit
Diam: 23.50 mm
Hole: 19.00 mm
Thickness: 1.00 - 1.10 mm (11 sizes)
Cut: each 0.01 mm
Box: 10 pcs x thickness
Total: 110 pcs
CRSW-A
Could use in place of;
Solenoid Washers Kit
Diam: 23.50 mm
Hole: 19.00 mm
Thickness: 0.90 - 1.00 mm (11 sizes)
Cut: each 0.01 mm
Box: 10 pcs x thickness
Total: 110 pcs
CRSW-B
Could use in place of;
Solenoid Washers Kit
Hex: 22.00 mm
Hole: 19.00 mm
Thickness: 1.00 - 1.10 mm (11 sizes)
Cut: each 0.01 mm
Box: 10 pcs x thickness
Total: 110 pcs
CRSW-C
Could use in place of;
To Order Call: 1800 331 277
Page T62
CRSW-D
Could use in place of;
CRSW-E
Could use in place of;
CRSW-F
Could use in place of;
CRSW-G
Could use in place of;
Solenoid Washer Kit
Hex: 22.00 mm
Hole: 19.00 mm
Thickness: 0.90 - 1.00 mm (11 sizes)
Cut: each 0.01 mm
Box: 10 pcs x thickness
Total: 110 pcs
Settlement Washers Kit
Diam: 15.70 mm
Hole: 10.50 mm
Thickness: 1.20 - 1.30 mm (11 sizes)
Cut: each 0.01 mm
Box: 10 pcs x thickness
Total: 110 pcs
Solenoid Washer Kit
Diam: 23.00 mm
Hole: 19.50 mm
Thickness: 1.34 - 1.76 mm (22 sizes)
Cut: each 0.02 mm
Box: 10 pcs x thickness
Total: 220 pcs
Solenoid Washer Kit
Diam: 23.50 mm
Hole: 19.00 mm
Thickness: 1.10 - 1.20 mm (11 sizes)
Cut: each 0.01 mm
Box: 10 pcs x thickness
Total: 110 pcs
DIESEL SYSTEMS AUSTRALIA
Page T63
Solenoid Washer Kit
Diam: 22.00 mm
Hole: 19.00 mm
Thickness: 1.30 - 1.40 mm (11 sizes)
Cut: each 0.01 mm
Box: 10 pcs x thickness
Total: 110 pcs
CRSW-H
Could use in place of;
Solenoid Washer Kit
Diam: 22.00 mm
Hole: 18.00 mm
Thickness: 1.00 - 1.10 mm (11 sizes)
Cut: each 0.01 mm
Box: 10 pcs x thickness
Total: 110 pcs
CRSW-I
Could use in place of;
Solenoid Washer Kit
Diam: 22.00 mm
Hole: 18.00 mm
Thickness: 0.90 - 1.00 mm (11 sizes)
Cut: each 0.01 mm
Box: 10 pcs x thickness
Total: 110 pcs
CRSW-J
Could use in place of;
Calibration Thickness Kit
Diam: 5.50 mm
Hole : 3.40 mm
Thickness: 1.20 - 1.70 mm (24 sizes)
Cut: each 0.02 mm
Box: 10 pcs x thickness
Total: 240 pcs
CRSK-A
Could use in place of;
To Order Call: 1800 331 277
Page T64
CRSK-A5
Could use in place of;
CRSK-B
Could use in place of;
CRSK-C
Could use in place of;
CRSK-C5
Could use in place of;
Calibration Thickness Kit
Diam: 5.50 mm
Hole: 3.40 mm
Thickness: 1.20 - 1.70 mm (11 sizes)
Cut: each 0.05 mm
Box: 10 pcs x thickness
Total: 110 pcs
Calibration Thickness Kit
Diam: 5.50 mm
Hole: 3.40 mm
Thickness: 0.90 - 1.90 mm (21 sizes)
Cut: each 0.05 mm
Box: 10 pcs x thickness
Total: 210 pcs
Calibration Thickness Kit
Diam: 4.50 mm
Hole: 2.00 mm
Thickness: 1.20 - 1.70 mm (24 sizes)
Cut: each 0.02 mm
Box: 10 pcs x thickness
Total: 240 pcs
Calibration Thickness Kit
Diam: 4.50 mm
Hole: 2.00 mm
Thickness: 1.20 - 1.70 mm (11 sizes)
Cut: each 0.05 mm
Box: 10 pcs x thickness
Total: 110 pcs
DIESEL SYSTEMS AUSTRALIA
Page T65
Calibration Thickness Kit
Diam: 4.20 mm
Hole: 2.00 mm
Thickness: 1.20 - 1.70 mm (24 sizes)
Cut: each 0.02 mm
Box: 10 pcs x thickness
Total: 240 pcs
CRSK-D
Could use in place of;
Calibration Thickness Kit
Diam: 4.20 mm
Hole: 2.00 mm
Thickness: 1.20 - 1.70 mm (11 sizes)
Cut: each 0.05 mm
Box: 10 pcs x thickness
Total: 110 pcs
CRSK-D5
Could use in place of;
Calibration Thickness Kit
Diam: 5.30 mm
Hole: 2.40 mm
Thickness: 1.20 - 1.70 mm (24 sizes)
Cut: each 0.02 mm
Box: 10 pcs x thickness
Total: 240 pcs
CRSK-E
Could use in place of;
Calibration Thickness Kit
Diam: 5.30 mm
Hole: 2.40 mm
Thickness: 1.72 - 1.90 mm (10 sizes)
Cut: each 0.02 mm
Box: 10 pcs x thickness
Total: 110 pcs
CRSK-F
Could use in place of;
To Order Call: 1800 331 277
Page T66
Mercedes Common Rail Kit
For high pressure CP type pumps.
Composed of Mercedes bracket,
adaptor coupling, 3 fuel connectors and
a fuel connector plate.
CRSK-G
Could use in place of;
CRSK-H
Could use in place of;
CRSK-I
Could use in place of;
CR 128-20
Could use in place of;
Calibration Thickness Kit
Diam: 6.40 mm
Hole: 2.50 mm
Thickness: 1.20 - 1.30 mm (11 sizes)
Cut: each 0.01 mm
Box: 10 pcs x thickness
Total: 110 pcs
Calibration Thickness Kit
Diam: 7.70 mm
Hole: 4.40 mm
Thickness: 0.90 - 1.44 mm (24 sizes)
Cut: each 0.02 mm
Box: 10 pcs x thickness
Total: 240 pcs
Calibration Thickness Kit
Diam: 5.00 mm
Hole: 3.00 mm
Thickness: 1.00 - 1.20 mm (11 sizes)
Cut: each 0.02 mm
Box: 10 pcs x thickness
Total: 110 pcs
DIESEL SYSTEMS AUSTRALIA
Page T67
Timing Tools Phase Kit
Timing tool phase kit to use for
adjusting the phase of Fiat multijet
1300-1900 engines. Composed of a
couple of tools for blocking the
camshaft and a blocking camshaft pin
in PMS.
CR 128-27
Could use in place of;
Phase Distribution Chain Timing
Tool Kit
Kit composed of two main tools. The
first has to be used for the phase
procedure with the gear mounted, while
the second group has to be used for the
phase with the gear dismounted. For
Fiat multijet 1300-1900.
CR 128-28
Could use in place of;
Renault Timing Tool Kit
Kit is composed of a tool for locking the
aspiration can shaft, a tool for locking
the discharge cam shaft and a cam
shaft blocking pin. For Renault 2.2-2.5
Dci.
CR 128-29
Could use in place of;
Fiat Timing Tool Kit
This kit is composed of a tool for
locking the driveshaft and a camshaft
blocking pin. For Daily, Fiat Ducato 2.3-
2.8 CR
CR 128-30
Could use in place of;
To Order Call: 1800 331 277
Page T68
Timing Tools Phase Kit
Timing tool phase kit to use for
adjusting the phase of Fiat multijet
1300-1900 engines. Composed of a
couple of tools for blocking the
camshaft and a blocking camshaft pin
in PMS.
CR 128-32
Could use in place of;
CR 128-26
Could use in place of;
YDT367, YDT351,
YDT354, YDT356,
YDT372
CRBLT 134-12CR
Could use in place of;
CRBLT 134-ALL
Could use in place of;
Timing Tool Kit
Timing tool kit to suit Renault, Peugeot
and Citroen. It is composed of a tool
for locking the driveshaft and a cam
shaft blocking pin.
Tool Kit for CR Delphi Pumps
Kit for mounting and dismounting the
bearing and the seeger on common rail
Delphi pumps.
Common Rail Injector Tester
Burettes kit to check the back leakage
of common rail injectors (including
Mercedes) with connections for Bosch,
Delphi, Siemens, Denso nozzle
holders.
DIESEL SYSTEMS AUSTRALIA
Page T69
Common Rail Injector Tester
Burettes kit to check the back leakage
of common rail injectors (including
Mercedes) directly on the engine.
CRBLT 341
Could use in place of;
Denso Back Leak Adaptor Kit
A kit of 6 adaptors for back leak of
Denso nozzle holders.
CR 34-25
Could use in place of;
Ball Kit
Kit of 50 balls to suit common rail
injectors.
Size 1.34mm.
CR 25-CR
Could use in place of;
F.00V.C05.001
Phase 2 Ball Kit
Kit of 50 balls to suit common rail
injectors. Phase 2.
Size 1.34mm.
Material: Carbite of silicon.
CR 45-CR
Could use in place of;
F.00V.C05.008
To Order Call: 1800 331 277
Page T70
CR 128-31
Could use in place of;
CR 38-00
Could use in place of;
CR 46-00
Could use in place of;
CR 45-00
Could use in place of;
YDT 410
Volkswagen Timing Tool Kit
Timing tool kit for Volkswagen, Seat 1,
2, 3cyl.
Composed of a tool for locking the
driveshaft and a cam shaft blocking pin.
Wrench Tool Kit for Glow Plugs
Wrench tool kit for mounting and
dismounting all types of Glow Plugs
including Japanese brands.
Kit composed of 8 wrenches 8, 9, 10,
12 (4 wrench short set and 4 long set)
and 2 adaptors for dynamometric
wrench of 1/2" and 3/8.
False Glow Plug Tool Kit
Tool kit of 13 glow plugs to allow
compression test on Common Rail
engines Fiat, Mercedes, VW, Audi,
Renault, Toyota etc
False Actuator Kit
The kit has the capability to find
actuator faults and mechanical faults on
Common Rail pumps of all brands.
DIESEL SYSTEMS AUSTRALIA
Page T71
Fuel Pump High Pressure Repair
Kit
PA CP1 K. Suit 0 440 020 088
Mercedes.
CMR146
Could use in place of;
Fuel Pump High Pressure Repair
Kit
PA CP3. Suit 0 440 020 038 Citroen,
Peugeot, ZFord, Mazda, Nissan,
Renault.
CMR146/4
Could use in place of;
Fuel Pump High Pressure Repair
Kit
PA CP3 Tector. Suit 0 440 020 095
Iveco Eurocargo Tector.
CMR146/5
Could use in place of;
DRV Repair Kit
Bosch DRV CP1 S + CP1 K.
CMR141
Could use in place of;
F.01M.100.278
To Order Call: 1800 331 277
Page T72
Page T73
CMR141/3
Could use in place of;
CMR141/4
Could use in place of;
CMR141/5
Could use in place of;
CMR124/10
Could use in place of;
F.00V.C66.002,
F.00R.J02.176
DRV Repair Kit
Bosch DRV CP1 H. Suit 0 445 010 150
Alfa, Fiat, Lancia
DRV Repair Kit
Bosch DRV CP1 S. Suit 0 281 002 872
Citroen, Peugeot, Suzuki.
DRV Repair Kit
Bosch DRV CP3. Suit 0 928 400 481
Iveco, Eurocargo, Ford Cargo.
Repair Kit for Bosch System
Suit all Bosch System Injectors.
DIESEL SYSTEMS AUSTRALIA
Page T73
Repair Kit for Traditional
Injector
CMR124/5
Could use in place of;
F.00V.C99.176S
Repair Kit for Multijet Injector CMR124/7
Could use in place of;
F.00V.C99.176S
Repair Kit for 0 445 120 012
Suit Renault Premium Midlum CP2
CMR124/9
Could use in place of;
F.00V.C99.176S
Repair Kit for 0 445 120 044
Suit MAN TGA Engine D28
CMR170
Could use in place of;
To Order Call: 1800 331 277
Page T74
Page T75
CMR170/5
Could use in place of;
CMR144
Could use in place of;
CMR144/5
Could use in place of;
CMR206
Could use in place of;
Repair Kit for 0 445 120 030,
0 445 120 218
Suit MAN TGA Engine D20
Repair Kit for 0 445 120 007
Suit Iveco Eurocargo 2003 1 Series
Repair Kit for 0 445 120 054
Suit Iveco Eurocargo 2 Series
Repair Kit for 0 445 120 020,
0 445 120 019
Suit Renault Premium I dci
DIESEL SYSTEMS AUSTRALIA
Page T75
Repair Kit for 0 445 120 064
Suit Renault Premium II dxi
CMR208
Could use in place of;
Repair Kit for Euro 4/5, 4.5/6.7
cc.
Suit DAF LF Engine FR/GR
CMR210
Could use in place of;
Repair Kit for CP1 S
Suit 0 445 010 008, Alfa Romeo
156/166 2.4 JTD, Fiat 2.4 JTD, Lancia
2.4 JTD
CMR0096
Could use in place of;
F.01M.100.275
Repair Kit for CP1 K
Suit 0 445 010 008, 0 445 010 025,
Mercedes Sprinter 2.1/2.2, Vaneo
1.7CDI+ A160/170CDI E/C 200/220
CDI, Iveco Daily
CMR096/30
Could use in place of;
F.01M.100.275S
To Order Call: 1800 331 277
Page T76
Page T77
CMR096/32
Could use in place of;
F.01M.100.275,
F.01M.100,276,
F.01M.100.277
CMR096/35
Could use in place of;
CMR096/37
Could use in place of;
CMR096/40
Could use in place of;
Repair Kit for CP1 S
Suit 0 445 010 080, 0 445 010 018, 0
446 010 008, Fiat, Iveco, BMW,
Citroen, Peugeot, Renault, Ford,
Mercedes, Range Rover
Repair Kit for CP1 H
Suit 0 445 010 150, 0 445 010 156, Alfa
Romeo, Fiat, Lancia, Audi, Tuareg,
Opel
Repair Kit for CP1 H
Suit 0 445 010 139, Citroen, Fiat,
Lancia, Ford, Land Rover, Peugeot
Repair Kit for CP1 H
Suit 0 445 010 157, Fiat, Lancia, Alfa
Romeo, Opel
DIESEL SYSTEMS AUSTRALIA
Page T77
Repair Kit for CP1 H
Suit 0 445 010 171, 0 445 010 154,
Audi
CMR096/50
Could use in place of;
Repair Kit for CP2
Suit 0 445 020 012, Renault, Volvo
CMR137/5
Could use in place of;
Repair Kit for CP3
Suit 0 445 020 007, Case, Iveco
Eurocargo Tector, VW, Ford.
CMR137
Could use in place of;
Repair Kit for CP3
Suit 0 445 020 030, Hummer, Chevy,
GMC
CMR137/2
Could use in place of;
To Order Call: 1800 331 277
Page T78
Page T79
CMR138
Could use in place of;
F.00N.201.973
F.00N.201.974
F.00N.201.975
F.00N.201.976
CMR138/5
Could use in place of;
F.00N.201.973
F.00N.201.974
F.00N.201.975
F.00N.201.976
CMR139
Could use in place of;
F.00N.201.973
F.00N.201.974
F.00N.201.975
F.00N.201.976
CMR139/3
Could use in place of;
F.00N.201.973
F.00N.201.974
F.00N.201.975
F.00N.201.976
Repair Kit for CP3
Suit 0 445 010 143, BMW, Iveco,
Renault, Mercedes
Repair Kit for CP3
Suit 0 445 010 029, VW, Audi,
Mercedes
Repair Kit for CP3
Suit 0 445 010 108, BMW 740D
Repair Kit for CP3
Suit 0 445 010 045, Mercedes
DIESEL SYSTEMS AUSTRALIA
Page T79
Repair Kit for CP1 H
Suit 0 445 010 171, 0 445 010 154,
Audi
CMR139/4
Could use in place of;
F.00N.201.973
F.00N.201.974
F.00N.201.975
F.00N.201.976
Repair Kit for CP3
Suit 0 445 020 0075, 0 445 020 082,
Renault, BMW, Tuareg, Audi, Hyundai,
Kia
CMR139/5
Could use in place of;
F.00N.201.973
F.00N.201.974
F.00N.201.975
F.00N.201.976
Repair Kit for CP3
Suit 0 445 010 043, Volvo
CMR139/6
Could use in place of;
F.00N.201.973
F.00N.201.974
F.00N.201.975
F.00N.201.976
Repair Kit for CP3
Suit 0 445 020 018, 0 445 020 023,
Man
CMR183
Could use in place of;
To Order Call: 1800 331 277
Page T80
Page T81
CMR185
Could use in place of;
F.00N.201.975
F.00N.201.974
F.00N.201.976
F.00N.201.979
CMR186
Could use in place of;
CMR187
Could use in place of;
CMR189
Could use in place of;
Repair Kit for CP3
Suit 0 445 010 098, 0 445 010 073, 0
445 010 081, 0 445 010 091, 0 445 010
107, 0 445 010 135, 0 445 010 167, 0
445 010 213, Iveco, Fiat, Mazda, BMW,
Mercedes, Renault
Repair Kit for CP3
Suit 0 445 010 096, 0 445 010 120,
Mercedes
Repair Kit for CP3
Suit 0 445 010 105, 0 445 010 134, 0
445 010 113, 0 445 010 112, Toyota
Repair Kit for CP3
Suit 0 445 020 043, Komatsu, Cummins
DIESEL SYSTEMS AUSTRALIA
Page T81
Repair Kit for Delphi
Suit 9044A 013A, Citroen, Ford,
Nissan, Renault, Kia, Mercedes
CMR139/7
Could use in place of;
7135-479A
Repair Kit for Siemens
Suit 5WS40018-Z, A2C59511805,
A2C59511609, Peugeot, Citroen,
Renault, Ford
CMR143
Could use in place of;
X39-800-300-001Z
Repair Kit for Siemens
Suit 5WS40019-Z, 5WS40163Z,
A2C59511600, Peugeot, Citroen, Ford,
Volvo
CMR143/3
Could use in place of;
X39-800-300-020Z
Repair Kit for Siemens
Suit 5WS40008-Z, Ford, Citroen,
Peugeot, Mazda, Toyota
CMR143/5
Could use in place of;
X39-800-300-019Z
To Order Call: 1800 331 277
Page T82
Page T83
CMR143/6
Could use in place of;
CMR143/8
Could use in place of;
CMR166/2
Could use in place of;
094040-0010
CMR166/3
Could use in place of;
Repair Kit for Siemens
Suit 5WS40273, Land Rover, Ford
Repair Kit for Siemens
Suit 5WS40157, A2C59511314, Range
Rover, Land Rover, Jaguar, Peugeot,
Citroen
Repair Kit for HP0
Suit 94000-0055, Mitsubishi
Repair Kit for HP0
Suit 94000-0310, RE501640,
RE518423, John Deere
DIESEL SYSTEMS AUSTRALIA
Page T83
Repair Kit for HP3
Suit Toyota, Nissan
CMR166
Could use in place of;
294009-0030
Repair Kit for HP2
Suit Toyota
CMR166/5
Could use in place of;
097490-0010
Repair Kit for HP4
Suit 294050-0060, RE519597, John
Deere
CMR166/4
Could use in place of;
294009-0050
294009-0051
To Order Call: 1800 331 277
Page T84
DIESEL SYSTEMS AUSTRALIA
Page T85
Phone: 61 (03) 9553 4222
Fax: 61 (03) 9553 4224
E-mail: sales@dsa.net.au
Web: www.dsa.net.au
3/15B-56 Keys Road, Cheltenham,
VICTORIA 3192 AUSTRALIA
DIESEL SYSTEMS AUSTRALIA