Beruflich Dokumente
Kultur Dokumente
Shower trays and wet floor trays are permanent units which require tiling or similar installation. As an alternative Shower cubicles (see page 4) are semi-permanent and are free standing units fitted with a roof.
TRUE LEVELACCESS
0mm THRESHOLD
EasiDec shown
LEVEL ACCESS
15mm THRESHOLD
Sandwell shown
EASY ACCESS
30-80mm THRESHOLD
Abbeydale shown
STEP-IN
95-120mm THRESHOLD
Berriedale shown
A quick reference summary is shown overleaf for all floor type and waste options
IMPRESSIONS COLLECTION RANGE S760 model 1850 x 820mm 95 W760 model 1165 x 825mm 95
PRODUCT SIZE PAGE Abbeydale 850 960 x 960mm 37 Dovedale 1135 x 700mm 37 IMPRESSIONS COLLECTION RANGE D640 model 1135 x 700mm 102
SYMBOLS:
Bulk/oversized item
2
1
Wooden joists & boards
FLOOR TYPE
INSTALLATION TYPE
Concrete Concrete Recess Surface Gravity & screed (no screed) into mounted waste floor
Whale Shower Waste Pump Kit pump Typical Typical system timber conc/screed floor floor
EasiDec wet floor Sandwell MK3 655 Sandwell MK3 760 Westdale 655 Westdale 760 Westdale 850 Westdale 1000 Cardale MK2 Abbeydale 760 Abbeydale 850 Abbeydale 950 Abbeydale 1050 Dovedale MK2 Edale MK2
! ! ! ! ! ! ! ! ! ! ! ! ! !
! ! ! ! ! ! ! ! ! ! ! ! ! !
P4 P4.1 N/A P1 P1.1 P1 P1.1 P1 P1.1 P1 P1.1 P1 P1.1 P1 P1.1 N/A N/A N/A N/A N/A N/A N/A P2 P2 P2 P2 P2 P2 N/A P2 P2 P2 P2 P2 P2
N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A P2 P2
N/A N/A N/A N/A N/A N/A N/A P3 N/A N/A N/A N/A N/A N/A
EASY ACCESS
STEP-IN
! ! !
! ! !
! ! !
! ! !
G2 G2 G2
P2 P2 P2
P2 P2 P2
G1 G2
G1.1
See pages 42-47 for comprehensive details Shower Waste Pump Kit
P1 P2
P1.1
G3
P3
KEY
SYMBOLS:
Bulk/oversized item Made to order (see P200)
indicated above)
P4
P4.1
Corner cubicle
! ! ! ! ! ! Low entry height - 50mm (2) for walk-in users Pumped waste (no gravity option) Grab rails fitted as standard Single half, double half and full height door options Shower stool option Light/extractor fan option
CORNER CUBICLE
PRODUCT SIZE Corner cubicle 980 x 980mm PAGE 112
Refer to shower chair compatibility chart on page page 95 for full details
SYMBOLS:
Bulk/oversized item
4
D
THE BUILDING REGULATIONS 2000
The following section covers Approved Document M Sanitary accommodation in buildings other than dwellings with design guideline considerations.
Chiltern Invadex can offer the potential Specifier a complete design solution. The following pages detail these items - from the EasiDec (wet floor deck) to the Level Access Shower tray range, which include a host of showering screens, through to grab rails and hinged arm supports.
APPROVED DOCUMENT
M
M
75 617 600 705
135
SYMBOLS:
Bulk/oversized item Made to order (see P200)
4 0 20
n o ti i ed
Wet floor decks provide a gentle slope to a floor gulley and once installed and finished with a slip-resistant vinyl flooring, such as Altro, they become virtually undetectable to the untrained eye. It may well be that any kind of threshold step does not want to be incorporated in a potentially slippery environment. A wet floor/wet room installation offers possibly the best solution although site conditions play a major part in what will ultimately be specified. Again, it must be stressed that this only relates to public buildings (existing and new build) and not to the domestic environment.
DDA SUMMARY
In all instances regarding the DDA Chiltern Invadex suggest a Wet Floor EasiDec System is fitted WITHOUT a door/ panel to ensure maximum accessibility. This is pictured above. However, the decision on the selection of either a Wet floor System WITHOUT a door/panel (DDA compliant) or with an enclosure, or alternatively a Level access shower tray and enclosure (which may both be suitable non-DDA compliant alternatives) will rest ultimately with the Specifier. The
Level access range is not considered to be DDA compliant as the package incorporates an enclosure.
SYMBOLS:
Bulk/oversized item
6
D
DISABILITY DISCRIMINATION ACT APPROVED DOCUMENT M
Support rails/Assistance aids
In all instances, to aid people whilst utilising these facilities, it is necessary to provide support rails. These can take the form of hinged arm supports, grab rails and backrest for a WC, if applicable. The finished installation would then go towards complying with the duties of the DDA.
M M
Chiltern Invadex is one of the few companies that offer the potential Specifier a complete one stop design solution. The following pages detail these items - from the EasiDec (wet floor decks) to the Level Access Shower tray range, which include a host of showering screens, through to grab rails/hinged arm supports.
The Chiltern Invadex range of shower chairs and tip-up seats are suitable for use with these applications to further enhance assistance if necessary.
A nationwide team of field based Technical Sales Representatives can provide a detailed survey, or are available to offer assistance. In addition, a team of qualified tradesmen offer a full installation service. Chiltern Invadex and its approved dealer network can also provide routine servicing and maintenance.
Example illustrations are shown overleaf which would go towards fulfilling Section 5 M1/M3 of The Approved Document M.
APPROVED DOCUMENT
SYMBOLS:
Bulk/oversized item Made to order (see P200)
Specification All the component parts are available in a coated stainless steel finish (Toilet roll holder has polished stainless steel finish) and a powder coated stainless steel/Nitrotec powder coated mild steel finish where applicable (see Part no/ product specification table on page 10).
Grab rails 600mm Order code IDSLA21CSS Vertically mounted Hinged arm support Order codes IDSLA01CSS (800mm) IDSLA03CSS (700mm) Locks automatically in upright position Alternative fixing options to standard hinged arm support (shown left) Note: All the alternative fixing options are dependent on the wall construction
Floor console for hinged arm support Order code IDSLA07CSS Recommended when wall mounting is not possible/desirable. (Use in conjunction with IDSLA01CSS/ IDSLA03CSS)
Floor support set for hinged arm support Order code IDSLA065CSS Recommended when wall strength insuffient (Use in conjunction with IDSLA01CSS/ IDSLA03CSS)
Ancillary toilet roll holder Order code IDSLA05PSS Suits all hinged arm variants. (Use in conjunction with IDSLA01CSS/ IDSLA03CSS)
EasiDec 6
Backing plate Order code IDSLA66CSS For fixing hinged arm support from rear of wall. (Use in conjunction with IDSLA01CSS)/ IDSLA03CSS) Tip-up seat Order code TUW19P With padded seat, hinged arms, folding legs and backrest
Mounting set 45 degrees Order code IDSLA65CSS For mounting of hinged arm support at an angle of 45 degrees. (Use in conjunction with IDSLA01CSS)/ IDSLA03CSS)
Backing plate Order code IDSLA43CSS (for fixing grab rail from rear of wall). (Use in conjunction with IDSLA21CSS)
Backrest For wall fixing behind a toilet with a high level cistern Order code IDSLA47CSS (depth adjustable 275-420mm) Order code IDSLA46CSS (depth adjustable 195-260mm)
Note: Example shown is 1400 x 900mm EasiDec 6. Further examples are shown on pages 22-25.
Further options are available
IMPORTANT NOTE
The wet floor example is adaptable and can be fitted with a half height shower enclosure. Wet floor EasiDecs can be supplied without any door enclosure (see option 1 - curtain rail and curtain included) to meet DDA requirements. Full details showing all available enclosure options are contained in the Wet floor section of the Price and technical specification guide.
Layout shown is an example based on Section 5 M1/M3 of the Approved Document M 2004 SYMBOLS:
Bulk/oversized item
8
D
LEVEL ACCESS SHOWER TRAYS & ENCLOSURES (EXAMPLE)
See page 36 for the complete range of Level Access shower trays Level Access Shower Tray & Enclosure example (Westdale 760 model)
Enclosure
All Chiltern Invadex Level access shower trays, that is the Sandwell, Westdale and Cardale ranges, installed correctly, have a maximum 15mm threshold height. The Level access range is not considered to be DDA compliant as the package incorporates an enclosure. However, a tray option may be a more preferable solution for visually impaired users, as this defines the showering area more clearly. In all instances regarding the DDA Chiltern Invadex suggest a Wet Floor EasiDec System is fitted WITHOUT a door/panel to ensure maximum accessibility. However, the decision on the selection of either a Wet floor System WITHOUT a door/panel (DDA compliant) or with an enclosure, or alternatively a Level access shower tray and enclosure (which may both be suitable non-DDA compliant alternatives) will rest ultimately with the Specifier. IMPORTANT NOTE The Level Access Shower tray range is supplied as a kit, including the door enclosure. The door enclosures have been designed to be used in conjunction with the tray. Chiltern Invadex recommend the tray is fitted with the door enclosure supplied. Full details showing all available door enclosure options are contained in the Shower trays and enclosures section of the Price and technical specification guide. IF THERE IS NO REQUIREMENT FOR A DOOR ENCLOSURE THEN SELECT THE EASIDEC WET FLOOR WITHOUT A DOOR ENCLOSURE (WITH CURTAIN RAIL AND CURTAIN ONLY) Example: If the shower is to be used by a wheelchair user intending to gain access to and transfer onto a wall mounted shower seat (and back to a wheelchair) then to ensure adequate provision, the EasiDec wet floor system without a door enclosure should be specified (with curtain rail and curtain only).
WC details shown in conjunction with Chiltern Invadex TransAqua Shower chair range
To ensure adequate clearance of the WC the chair needs to be raised by 50mm (2). This needs to be specified at time of order.
480mm*
SYMBOLS:
Bulk/oversized item Made to order (see P200)
1 2
1 2
The use of backing plates, additional supports etc. would be dependent on the construction of the building. The quantities shown follow the guidelines closely and these (the origin guidelines too) are for illustration solely. As stated in the Approved Document, the solution may be achieved in any other way feasible.
SYMBOLS:
Bulk/oversized item
10
D
DDA COMPLIANT & LEVEL ACCCESS SHOWER COMPONENTS
The products on the following pages are components that support Part M of The Building Regulations Approved Document M 2000 (2004 edition) Access to and use of buildings. These products are suitable for both the EasiDec Wet Floor System and Level access shower trays & enclosures (does not include sanitaryware).
395
Flat padded shower seat with backrest, folding arms and legs
Maximum Load 200kg (31 stones) (440lb)
450 530 425 260
! ! ! ! ! code TUW19P
For use with shower trays and in wet floor areas Can be folded away when not in use Electrostatic powder coated stainless steel frame Durable PVC seat RAL 9910 Hipca white
390
Price 275
code CHSFX
Price 134
215
product Hinged arm support - Length 800mm Hinged arm support - Length 700mm
material description coated stainless steel 304 coated stainless steel 304
price 86 83
SYMBOLS:
Bulk/oversized item Made to order (see P200)
price 44
60
1000
! Includes clamps/cover plate ! Recommended when wall mounting of the hinged arm support is not possible or desirable ! Once mounted on the floor console the hinged arm support can be readjusted ! RAL9010 White code IDSLA07CSS product Console for hinged arm support incl clamps/cover set material description coated stainless steel 304
860 max
price 98
code IDSLA05PSS
price 12
320 275
256 320
O8.5
code IDSLA65CSS
price 101
! For fixing hinged arm support from rear of wall ! Supplied complete with welded nuts M8 and matching threaded studs, washers and nuts ! Backing plate visible at back side of wall ! RAL9010 White code IDSLA66CSS product Backing plate
285 256
price 21
SYMBOLS:
Bulk/oversized item
12
D
DDA COMPLIANT & LEVEL ACCCESS SHOWER COMPONENTS
Backrest
195-260
! For wall fixing behind a toilet with a high level cistern ! The user can lean backwards in safety and comfort ! Flexible and depth adjustable from 275-420mm (model with 195-260mm adjustment also available - not illustrated) ! RAL9010 White code IDSLA47CSS IDSLA46CSS product Backrest for toilet - depth adjustable from 275-420mm Backrest for toilet - depth adjustable from 195-260mm
265
material description coated stainless steel 304 coated stainless steel 304
Grabrail Ergogrip
Vertical static pressure 150kg
! Plastic flange with plastic cover ! Tube bent to 60 degrees to help wrist retain a natural position while holding the Ergogrip. Smooth form with firm grip. ! 600mm length ! RAL9010 White
75 705 617
600
code IDSLA21CSS
price each 36
Backing plate
150 140
! ! ! !
For fixing of Ergogrip grab rail from rear of wall Only in white Two per rail required RAL9010 White
80
52
M6
code IDSLA43CSS
price 15
135
product Fixed arm Fixed arm Fixed arm Fixed arm Fixed arm
Description Length 500mm Length 600mm Length 700mm Length 800mm Length 900mm
material description Coated Stainless Steel Coated Stainless Steel Coated Stainless Steel Coated Stainless Steel Coated Stainless Steel
price 63 68 73 78 83
SYMBOLS:
Bulk/oversized item Made to order (see P200)
52
400
275-420
O80
Guarantee
Two years warranty on all products.
Material specifications
Stainless steel AISI 304, 28,0 X 1.5mm Stainless steel AISI 304, 25,4 X 1.5mm Wall flanges Ergogrip and wall plate hinged arm support:glassfibre reinforced nylon Plastic bathroom accessories: nylon PMMA Moving and/or hinged parts are always made of stainless steel and/or plastic Preparation for coating - before coating, steel is alkaline degreased, phosphated and passified.
Coating
Epoxy, 80-100m thick. Weather resistant and hardened (International Buchholz hardness test to DIN50021/ASTM B117 (1000 HOURS, <1mm)
Fixing materials
Products are delivered without fixings (unless indicated). Determine the type of wall and use suitable fixings. For a durable, reliable mounting, use only corrosion resistant fixing materials.
Weight limits
Fixed and hinged arm supports Vertical static pressure: 150kg Lateral static pressure: 100kg Hinged armsupports approved according to DIN EN ISO 9999 (08/98) TEST STANDARDS en 12182:1999-11 (clause 4,12,13,14,16 en 18)
SYMBOLS:
Bulk/oversized item
14
D
MOUNTING ADVICE
MOUNTING ADVICE FOR FIXED & HINGED ARM SUPPORTS
TYPE OF WALL Solid concrete, natural stone PLUGS Fischer Universalplug UX UX8 ART. 77869 Injection mortar + threaded rod Injection mortar + anchor sleeve + screw inserts Possible mortars to use are: - FIS VS 150 C set art.45303 or UMP 44 CX150 art.0509 - Fischer anchor sleeve FIS H 14 x 70k art.50436 - Fischer screw insert FIS E 8x85k art.58050 Reinforce the wall e.g. with plywood Reinforce the wall, e.g with solid water plywood, thickness 32mm SCREWS Stainless steel screws 8mm
Solid/massive areated concrete Perforated/hollow Hollow brick (Poriso), Hollow sand-lime brick
Plaster board, squeezed fibreboard chipboard Concealed tank and carrier system, like Geberit, Wisa
Plaster board, squeezed fibreboard chipboard Concealed tank and carrier system, like Geberit, Wisa
This mounting method statement is a recommendation only. The mounting method and the length of the screws need to be determined at site according to the type of wall. Chiltern Invadex is not responsible for any incorrect mounting of products and possible damage resulting. SYMBOLS:
Bulk/oversized item Made to order (see P200)
COMPLEMENTARY PRODUCTS
Portascreen shower guard
! ! ! ! ! Containing the spray from a shower is made simple with the Portascreen shower guard. The Portascreen can be used in addition to the EasiDec wet floor system. Portable and easy to handle Folds flat for storage Hinged doors are easily positioned to provide maximum protection for the carer, when assisting in the shower ! Carrying case option ! Special sizes can be made to order. Extended delivery times apply. code IDGPS02 IDSPB01 IDGPS01 product White Portascreen Shower Guard Size 1474 x 815mm Nylon carrying case (navy) White Portascreen Shower guard - 4 panel (2000mm x 815mm) no carrying case option. Price 160 15 180
SYMBOLS:
Bulk/oversized item
16
D
SHOWER & MIXER UNITS
Mira Advance ATL Electric Shower
! Mira Advance ATL 9Kw electric shower has a push button stop and flow controls which are independent of the temperature dial ! Safe showering with precise thermostatic control for constant water temperature ! ATL - Adjustable Temperature Limit for added safety ! Instantly heats water to guarantee a hot shower every time ! New fittings - smooth slide bar with easy glide operation ! Tactile push button flow controls for ease of use ! 2 Year guarantee
code IDWMA01A
product Mira Advance ATL - Electric shower heater 9 Kw, incl. handset, hose, slider bar & soap dish
Price 320
code IDWMA05A
product Mira Advance ATL Flex - Electric 9 Kw shower heater, incl. 1 metre riser rail and 2 metre hose, separate wall mounted handset holder, standard riser rail, and easy touch temperature control lever.
Price 350
code IDWME01
product Mira Excel - Thermostatic Mixing Valve (handset, riser rail and hose included)
Price 425
SYMBOLS:
Bulk/oversized item Made to order (see P200)
WET FLOORS
SYMBOLS:
Bulk/oversized item
18
G3 P4 P4.1
See
KEY
below
NOT HANDED
800
900 900
800 800
1500
EASIDEC 1
EASIDEC 2
EASIDEC 3
EASIDEC 4
EASIDEC 5
900
1200
900
1700
1850
1400
1200
1700
EASIDEC 6
EASIDEC 7
EASIDEC 8
EASIDEC 9
Note: Shaded EasiDec models shown above are recommended DDA compliant sizes. However, other sizes are available as shown and the final decision will rest ultimately with the specifier.
G3
P4
P4.1
KEY
SYMBOLS:
Bulk/oversized item Made to order (see P200)
G3
See p19 for EasiDec options
Designed for use on a timber floor installation - sits within void in joists For use with the EasiDec wet floor 19mm water seal trap Removable top cover for routine cleaning and maintenance
code SH0202
colour White
Price 26
WET FLOOR GRAVITY WASTE SPECIFICATION Gravity waste for wet floor cross section exploded view
106mm
100mm
Rubber seal 98mm depth (assembled) Shower trap body 100mm 1 1/2- Multifit
Gravity waste for wet floor cross section assembled - 19mm water seal trap
EasiDec profile located underneath gulley lip 98mm (depth assembled) 20mm Invert 55mm level Centreline 105mm of outlet 43mm
SYMBOLS:
Bulk/oversized item
20
G3
See p19 for EasiDec options
7 2
150mm Altro upstand Altro Marine 20 6mm water proof based ply B C D 35mm cove former
16
46
18 35
75mm x 50mm supporting noggin spaced at 500 centres Gravity waste 42mm (1 1/2) waste pipe Cavity wall construction
Altro Coveformer
18 35
A B C D
= = = =
175mm - typical 150mm joist 85mm - to centreline of waste 98mm 105mm (Invert level)
Altro Coveformer
6mm water proof based ply (finished floor level) 19mm tongue and groove floorboards
Typical joist installation 450 or 600 c/c 150mm joist depth Gravity waste positioned within joist void. Routable positioning of trap to suit site conditions 42mm (1 1/2) waste pipe routed to SVP
Support noggins 38mm minimum thickness (or at least half the depth of joist)
SYMBOLS:
Bulk/oversized item Made to order (see P200)
P4
options
See p19 for Pumped waste for wet floor suitable for concrete floor construction EasiDec
! Designed for use on a concrete floor installation ! Ideal application when a wet floor installation is required and it is not possible to utilise a gravity version due to the depth of a typical gravity trap. The Whale waste outlet and pipework can be sited into the screed requiring only a 45mm depth, therefore unaffecting a typical in-situ RC suspended floor and/or pre-cast concrete floor. ! For use with: - EasiDec wet floor range ! Can pump hair, gel, grit and other shower waste without blocking ! No filter in waste system - no cleaning required ! Valves integral to the pump prevent odours escaping from the drainage pipe ! Further technical information available on request code IDWWP05 product Pump with wet floor gulley colour White Price 366
WET FLOOR PUMPED WASTE SPECIFICATION See pages 30-33 for details of How to order the EasiDec. Pumped waste for wet floor exploded view
45mm Depth in relation to underside of gulley lip (to underside of collar) 130mm diameter lower cup with 22mm side spigot
200mm diameter
195mm
SYMBOLS:
Bulk/oversized item
22
P4
See p19 for EasiDec options
7 2
Chltern Invadex Easidec Altro Marine 20 6mm waterproof plyboard/self levelling compound 35mm cove former
16
46
A
18 35 Self levelling compound Typical 50mm screed Weak sand/cement mix or expanding foam Typical 150mm pre-cast concrete
Altro Coveformer
18 35
A = 225mm B = 45mm - depth of gulley to underside of speed fit connector Typical dimensions
Altro Coveformer
Plywood Insulation
SYMBOLS:
Bulk/oversized item Made to order (see P200)
P4
See p19 for EasiDec options
Important: An additional flow switch is required for a shower mixer valve installation connected into the hot water supply. The switch may be positioned horizontally or vertically.
The arrow indicated on the flow switch shows the direction of the water flow To transformer
SYMBOLS:
Bulk/oversized item
24
P4
See p19 for EasiDec options
Almost silent when running - eliminates gulley suction noise Suits any existing Whale installation Flow rate of the pump adjusts automatically to changes in the shower flow rate Compensates for changes in the voltage from the mains electric supply 2 year warranty
code IDWWP06
Price 368
SYMBOLS:
Bulk/oversized item Made to order (see P200)
P4.1
TM
See p5 for Pumped waste for wet floor suitable for concrete floor construction EasiDec
(Whale Instant Match for use with Mira Advance Extra)
! Designed for use on a concrete floor installation ! Ideal application when a wet floor installation is required and it is not possible to utilise a gravity version due to the depth of a typical gravity trap. The Whale waste outlet and pipework can be sited into the screed requiring only a 45mm depth, therefore unaffecting a typical in-situ RC suspended floor and/or pre-cast concrete floor. ! Quiet gulley ! No set up required - plug and play ! No flow sensor/flow switch to fit ! For use with: - EasiDec wet floor range ! Can pump hair, gel, grit and other shower waste without blocking ! No filter in waste system - no cleaning required ! Valves integral to the pump prevent odours escaping from the drainage pipe ! Further technical information available on request
options
Important note: The Whale Instant Match pump/wet floor gulley can only be used with the Mira Advance Extra or Mira Advance Flex Extra. This is a different shower unit to the standard Mira, incorporating an internal shower flow sensor.
TM
code IDWWP08
product Pump with wet floor gulley for use with Mira Advance Extra shower unit. Select the appropriate shower unit from the options shown below
colour White
Price 396
Cross sectional views/dimensional information is shown on pages 22-23. See pages 30-33 for details of how to order the EasiDec. Mira Advance Extra
! Designed for use with the Whale Instant Match (shown above) ! Internal Shower Flow Sensor measures the flow rate going to the shower head. The Whale Instant Match automatically adjusts the pump speed in relation to the flow rate of the Mira Advance Extra Shower. ! Mira Advance ATL 9Kw electric shower has a push button stop and flow controls which are independent of the temperature dial ! Safe showering with precise thermostatic control for constant water temperature ! ATL - Adjustable Temperature Limit for added safety ! Instantly heats water to guarantee a hot shower every time ! New fittings - smooth slide bar with easy glide operation ! Tactile push button flow controls for ease of use ! 2 Year guarantee ! RNIB approved ! BEAB caremark Mira Advance Flex Extra Illustrated code IDWMA01AE IDWMA05AE Mira Advance Flex Extra has the same features as the Mira Advance Extra but features an extended temperature control lever, 2m hose and additional handset holder for flexible showering heights.
product Mira Advance Extra Thermostatic shower unit Mira Advance Flex Extra Thermostatic shower unit
SYMBOLS:
Bulk/oversized item
26
P4.1
See p19 for EasiDec options
2 3 Whale Instant Match Transformer increases and decreases the speed of the pump dependent on the shower flow rate
TM
Internal Shower Flow 1 Sensor measures the flow rate going to the shower head
The flow rate information is sent via a cable to the Whale Instant Match Transformer
TM
Matching the pump flow rate to the shower flow rate ensures that gulley suction noise is minimised
TM
! Quiet gulley ! No set up required - plug and play ! No flow sensor/flow switch to fit
SYMBOLS:
Bulk/oversized item Made to order (see P200)
WET FLOORS
The EasiDec is installed under the floor and covered with vinyl flooring to create a completely level access showering area.
Typical wet floor door & enclosure options (see p30-33 for the complete range)
Pair of bi-fold doors hinged off wall and meeting on the corner
Kit contents
Door and enclosure kit contents: ! EasiDec wet floor dec ! Door set c/w rising butt hinge (as appropriate) shown right ! Half height fixed panel (s) (as appropriate) ! Assistance pole (s) (1950mm) to Curtain Rail (floor to Ceiling pole available as an option - additional 15. Confirm height) ! Wet floor bolster (to suit) ! Curtain Track and Hooks to suit door option ! White Shower Curtain ! Fitting instructions Dec only contents ! EasiDec wet floor dec ! Fitting instructions
How to order
1. Choose the size of EasiDec Wet floor tray required from the options shown on page 19. 2. Choose the EasiDec and enclosure option required from the 15 options shown on pages 30-33. 3. Choose the waste option required - Gravity or pumped waste from the options shown below.
Drain options
The EasiDec can be supplied with gravity or pumped waste option. Note: The EasiDec does not include a waste adaptor/ trap or pump - choose from the options shown below:
SYMBOLS:
Bulk/oversized item
28
! Bolsters are included in the enclosure kit as standard for the EasiDec range ! Wall mounted aluminium extrusion which allows a Chiltern Invadex wet floor enclosure to be fixed to the wall ! Follows the 35mm radius for wet floor coving
! Wet floor bolster is shown left with Chiltern Invadex slide & fold door & rising butt hinge
SYMBOLS:
Bulk/oversized item Made to order (see P200)
WET FLOOR TRAYS & ENCLOSURES (MORE DEC/ENCLOSURE OPTIONS SHOWN OPPOSITE)
Note: Option 1 Option 2
Left hand
Option 3
Left hand
Option 4
Right hand
Dec size
800 1300
1000
1000
01-110823002 00-101223001 Dec only Price 230 Price 262 Includes EasiDec 2 EASIDEC 2 & rail/curtain
00-101213302 = LH 00-101233302 = RH Price 470 Includes EasiDec 2, jamb, rail/curtain 00-101313302 = LH 00-101333302 = RH Price 470 Includes EasiDec 3, jamb, rail/curtain 00-101313303 = LH 00-101333303 = RH Price 770 Includes EasiDec 3, enclosure, rail/curtain
1500
01-110823003 00-101323001 800 Dec only Price 230 Price 262 EasiDec 3 EASIDEC 3 Includes & rail/curtain
900 900
01-110823004 00-101423001 Dec only Price 230 Price 262 Includes EasiDec 4 EASIDEC 4 & rail/curtain
00-101413302 = LH 00-101433302 = RH Price 470 Includes EasiDec 4, jamb, rail/curtain 00-101513302 = LH 00-101533302 = RH Price 470 Includes EasiDec 5, jamb, rail/curtain
800 800
01-110823005 00-101523001 Dec only Price 230 Price 262 Includes EasiDec 5 EASIDEC 5 & rail/curtain
1-110823006 00-101623001 900 Dec only Price 230 Price 262 EasiDec 6 EASIDEC 6 Includes & rail/curtain
1400
1200
01-110823007 00-101723001 Dec only Price 264 Price 297 Includes EasiDec 7 EASIDEC 7 & rail/curtain
1200
01-110823008 00-101823001 900 Dec only Price 296 Price 330 EasiDec 8 EASIDEC 8 Includes & rail/curtain
00-101713302 = LH 00-101733302 = RH Price 510 Includes EasiDec 7, jamb, rail/curtain 00-101813302 = LH 00-101833302 = RH Price 543 Includes EasiDec 8, jamb, rail/curtain
1850
01-110823009 00-101923001 Dec only Price 529 Price 565 1700 Includes EasiDec 9 & rail/curtain
EASIDEC 9
(non-stock item)
1700
SYMBOLS:
Bulk/oversized item
30
WET FLOOR TRAYS & ENCLOSURES (MORE DEC/ENCLOSURE OPTIONS SHOWN OVER)
Note: Option 5 Option 6
Left hand
Option 7
Left hand
Option 8
Right hand
Dec size
800 1300
00-101123308 Price 595 Includes EasiDec 1, enclosure, rail/curtain 00-101223308 Price 595 Includes EasiDec 2, enclosure, rail/curtain
1000
EASIDEC 2
1000
01-110823003 00-101323305 800 Dec only Price 230 Price 670 EasiDec 3, EASIDEC 3 Includes enclosure, rail/curtain enclosure, rail/curtain 01-110823004 Dec only Price 230
1500
00-101313306 = LH 00-101333306 = RH Price 670 Includes EasiDec 3, enclosure, rail/curtain 00-101423306 *Not handed (Square) Price 670 Includes EasiDec 4, enclosure, rail/curtain 00-101523306 *Not handed Price 670 Includes EasiDec 5, enclosure, rail/curtain
900 900
EASIDEC 4
01-110823005 Dec only Price 230
800
EASIDEC 5
800
01-110823006 00-101623305 Dec only Price 230 Price 670 900 Includes EasiDec 6, EASIDEC 6 enclosure, rail/curtain
1400
01-110823007 00-101723305 Dec only Price 264 Price 700 Includes EasiDec 7, EASIDEC 7 enclosure, rail/curtain 00-101723306 *Not handed (Square) Price 700 Includes EasiDec 7, enclosure, rail/curtain 00-101723308 Price 630 Includes EasiDec 7, enclosure, rail/curtain
1200
1200
01-110823008 00-101823305 = LH 900 Dec only Price 296 Price 730 Includes EasiDec 8, EASIDEC 8 enclosure, rail/curtain
1850
1700
EASIDEC 9
(non-stock item)
1700
SYMBOLS:
Bulk/oversized item Made to order (see P200)
WET FLOOR TRAYS & ENCLOSURES (MORE DEC/ENCLOSURE OPTIONS SHOWN OPPOSITE)
Note: Option 9
Left hand
Option 10
Left hand
Option 11
Left hand
Option 12
Left hand
Right hand
Right hand
Right hand
Right hand
1000
EASIDEC 2
1000
01-110823003 00-101313309 = LH 800 Dec only Price 230 00-101333309 =RH 648 EASIDEC 3 Price Includes EasiDec 3, enclosure, rail/curtain 01-110823004 Dec only Price 230
00-101223310 *Not handed (Square) Price 690 Includes EasiDec 2, enclosure, rail/curtain 00-101313310 = LH 00-101333310 = RH Price 690 Includes EasiDec 3, enclosure, rail/curtain 00-101423310 *Not handed (Square) Price 690 Includes EasiDec 4, enclosure, rail/curtain
00-101213311 = LH 00-101233311 = RH Price 575 Includes EasiDec 2, enclosure, rail/curtain 00-101313311 = LH 00-101333311 =RH Price 575 Includes EasiDec 3, enclosure, rail/curtain 00-101413311 = LH 00-101433311 = RH Price 575 Includes EasiDec 4, enclosure, rail/curtain 00-101313312 = LH 00-101333312 = RH Price 655 Includes EasiDec 3, enclosure, rail/curtain
1500
900 900
EASIDEC 4
800 800
EASIDEC 5
00-101523310 *Not handed (Square) Price 690 Includes EasiDec 5, enclosure, rail/curtain
1400
01-110823006 00-101613309 = LH 900 Dec only Price 230 00-101633309 = RH Price 648 EASIDEC 6 Includes EasiDec 6, enclosure, rail/curtain 01-110823007 Dec only Price 264
00-101613310 = LH 00-101633310 = RH Price 690 Includes EasiDec 6, enclosure, rail/curtain 00-101723310 *Not handed (Square) Price 720 Includes EasiDec 7, enclosure, rail/curtain
00-101613311 = LH 00-101633311 = RH Price 575 Includes EasiDec 6, enclosure, rail/curtain 00-101713311 = LH 00-101733311 = RH Price 610 Includes EasiDec 7, enclosure, rail/curtain
00-101613312 = LH 00-101633312 = RH Price 655 Includes EasiDec 6, enclosure, rail/curtain 00-101713312 = LH 00-101733312 = RH Price 690 Includes EasiDec 7, enclosure, rail/curtain
1200
EASIDEC 7
1200
01-110823008 00-101813309 = LH 900 Dec only Price 296 00-101833309 = RH Price 710 EASIDEC 8 Includes EasiDec 8, enclosure, rail/curtain 00-101813312 = LH 00-101833312 = RH Price 720 Includes EasiDec 8, enclosure, rail/curtain
1850
1700
EASIDEC 9
(non-stock item)
00-101923310 *Not handed (Square) Price 975 Includes EasiDec 9, enclosure, rail/curtain
1700
SYMBOLS:
Bulk/oversized item
32
Option 15
Left hand
Right hand
Right hand
1000
EASIDEC 2
1000
01-110823003 00-101323313 800 Dec only Price 230 Price 695 EasiDec, EASIDEC 3 Includes enclosure, rail/curtain 00-101313314 = LH 00-101333314 = RH Price 655 Includes EasiDec, enclosure, rail/curtain 00-101313315 = LH 00-101333315 = RH Price 830 Includes EasiDec, enclosure, rail/curtain
1500
900 900
EASIDEC 4
800 800
EASIDEC 5
01-110823006 00-101623313 900 Dec only Price 230 Price 695 Includes EasiDec 6, EASIDEC 6 enclosure, rail/curtain
1400
01-110823007 00-101723313 Dec only Price 264 Price 725 Includes EasiDec 7, EASIDEC 7 enclosure, rail/curtain
00-101613314 = LH 00-101633314 = RH Price 655 Includes EasiDec 6, enclosure, rail/curtain 00-101713314 = LH 00-101733314 = RH Price 690 Includes EasiDec 7, enclosure, rail/curtain
00-101613315 = LH 00-101633315 = RH Price 830 Includes EasiDec 6, enclosure, rail/curtain 00-101713315 = LH 00-101733315 = RH Price 860 Includes EasiDec 7, enclosure, rail/curtain
1200
1200
01-110823008 00-101823313 900 Dec only Price 296 Price 760 Includes EasiDec 8, EASIDEC 8 enclosure, rail/curtain 00-101813314 = LH 00-101833314 = RH Price 720 Includes EasiDec 8, enclosure, rail/curtain
1850
1700
EASIDEC 9
(non-stock item)
1700
SYMBOLS:
Bulk/oversized item Made to order (see P200)
code 08-010023001 08-010023002 08-010023003 08-010023004 08-020023001 08-020023002 08-020023003 08-030023001 08-030023002 08-030023003
product L shaped 990 x 990 white L shaped 1300 x 1300 white L shaped 2000 x 1000 white L shaped 2000 x 2000 white U shaped 990 x 1980 x 990 white U shaped 1300 x 2600 x 1300 white U shaped 2000 x 2000 x 2000 white Straight 1m white Straight 1.85m white Straight 2.5m white
Price 33 34 35 36 74 75 76 20 25 30
Note: please contact the Technical Helpdesk for information about anti-ligature curtain rails used in conjunction with EasiDec & enclosure.
Replacement Curtains (A curtain is included as standard when ordered with an EasiDec and enclosure kit)
! ! ! ! 113gms (4oz) fabric weight 100% Polyester impregnated and coated with microporous polymers Anti-fungal - will not support growth of mildew or any other fungal growth. Tested to BS6085 Part 5: 1992. Antibacterial - offers antibacterial protection as per ASTM2149-01 method: for the determination of the presence of (Aegis) Antibacterial agent. ! Stain resistant - excellent stain removal for blood, urine, grease, ink, coffee, Iodine, Betadine ! Care & maintenance - Routine soap and water sponging is effective for ordinary soiling. Fresh stains both oil and water based are easily removed using most water based household spray cleaning agents. Antiseptic cleaning agents can also be used and more stubborn stains may require a safe solvent such as Isopropyl alcohol or mineral spirit. price 22 32 32 34 36 36
product 1800mm Width x 1800mm Length 2200mm Width x 1750mm Length 2200mm Width x 1900mm Length 2540mm Width x 1750mm Length 2540mm Width x 1900mm Length 2540mm Width x 2000mm Length
SYMBOLS:
Bulk/oversized item
34
SYMBOLS:
Bulk/oversized item Made to order (see P200)
G1 G1.1 P1 P1.1 P2 *
1850
820
G1 G1.1 P1 P1.1 P2 *
LEFT HAND
WESTDALE 655
RIGHT HAND
WESTDALE 655
WESTDALE 760
1165 720 825
WESTDALE 760
1165 720 825
G1 G1.1 P1 P1.1 P2 *
1165
G1 G1.1 P1 P1.1 P2 *
1165
LEFT HAND
WESTDALE 850
RIGHT HAND
WESTDALE 850
Shower Waste Pump option suitable for timber joist situation with void - see p48-49.
G1 G1.1 P1 P1.1 P2 *
1270 915
LEFT HAND
WESTDALE 1000
G1 G1.1 P1 P1.1 P2 *
1270 915
RIGHT HAND
1065 1065
Shower Waste Pump option suitable for timber joist situation with void - see p48-49.
G1 G1.1 P1 P1.1 P2 * P3
NOT HANDED
Rotate to suit
Shower Waste Pump option suitable for timber joist situation with void - see p48-49.
CARDALE MK2
1340 795
CARDALE MK2
1340
P3
795
LEFT HAND
GRAVITY WASTE OPTIONS
Gravity waste (Invawaste) See pages 39-41 for comprehensive details
RIGHT HAND
PUMPED WASTE OPTIONS
Whale Shower Drain Pump Kit See pages 42-47 for comprehensive details Shower Waste Pump
G1
G1.1
P1 P2
P1.1
KEY
SYMBOLS:
Bulk/oversized item
36
See page 48-49 for comprehensive details Shower tray Integral Pump See page 50 for comprehensive details
P3
ABBEYDALE 760
ABBEYDALE 760
860
G1 G1.1 P2 *
1200
G1 G1.1 P2 *
Shower Waste Pump option suitable for timber joist situation with void - see p48-49.
1200 860
LEFT HAND
ABBEYDALE 850
RIGHT HAND
960 960
Shower Waste Pump option suitable for timber joist situation with void - see p48-49.
G1 G1.1 P2 *
Rotate to suit
ABBEYDALE 950
G1 G1.1 P2 *
1080
1080
Rotate to suit
ABBEYDALE 1050
G1 G1.1 P2 *
1200
1200
Rotate to suit
DOVEDALE MK2
G2 P2
1135 700
1135
1135 700
700
Option A
Option D
Outlet
Notes: Trap not included. A P/S trap is suggested. Outlet diameter is 40mm.
4-WAY HAND
G2 P2 820
Outlet
700
Option C
Option B
Outlet
EDALE MK2
G2 P2
1110
1110
820
LEFT HAND
RIGHT HAND
G1 G2
G1.1
KEY
Fax: +44 (0) 1869 365588
sales@chilterninvadex.co.uk
37
SYMBOLS:
Bulk/oversized item Made to order (see P200)
BERRIEDALE
1255
BERRIEDALE
1255
G2 P2
710
G2 P2
710
LEFT HAND
FERNDALE
RIGHT HAND
FERNDALE
G2 P2
925
710
G2 P2
925
710
LEFT HAND
HENLEYDALE
1840
RIGHT HAND
Rotate to suit
G2 P2
700
The Henleydale has a gravity waste, routable underneath the tray for convenience in installation See page 91.
NOT HANDED
G2
P2
KEY
SYMBOLS:
Bulk/oversized item
38
G1
See p36-37 for Tray options
! Designed for use on a timber floor installation - sits within void in joists. 90mm shower trap with 50mm water seal and removable waste. ! For use with the following shower trays (gravity versions): - Sandwell range (Included in standard package) - Westdale range (Included in standard package) - Abbeydale range (Included in standard package) ! Removable top cover and removable inner cup for routine cleaning and maintenance
For further technical information go to the Shower trays & enclosure specification guide. This section starts on page 52.
code IDMIV02 product Gravity waste (chrome) - replacement part Price 30
Locking nut Tapered rubber seal Rubber seal 1 1/2 BSP 82mm
117mm
Shower trap body 135 bend 1 1/2- Multifit (Adjustable outlet position to suit site conditions)
Main body 90mm diameter
SYMBOLS:
Bulk/oversized item Made to order (see P200)
G1
See p36-37 for Tray options
6mm Water proof based ply (finished floor level) 19mm tongue & groove floor boards B C A Joist D
Trap may be turned to allow 135 degree knuckle bend to rotate to allow waste pipe to exit horizontally through the wall or through ceiling void. Recommended fall of waste pipe = 1:40 A B C D = = = = 175mm - typical 150mm joist 70mm 85mm 75mm (Invert level)
135 degree knuckle bend Cavity wall construction 42mm (1 1/2) waste pipe Underside of tray void filled with foam (flame retardant where applicable)
Typical dimensions
TYPICAL 3D SECTION THROUGH LEVEL ACCESS SHOWER TRAY - TIMBER FLOOR CONSTRUCTION
Example Illustration shows Westdale 655/760 shower tray installation (left hand waste outlet) Note position of waste over to left hand side
6mm water proof based ply (finished floor level) 19mm tongue and groove floorboards Cavity wall construction
Typical Sandwell/Westdale Level access shower tray Typical joist installation 450 or 600 c/c 150mm joist depth 42mm (1 1/2") waste pipe routed to SVP
Invawaste positioned within joist void. Routable positioning of trap to suit site conditions
Support noggins 38mm minimum thickness (or at least half the depth of joist)
SYMBOLS:
Bulk/oversized item
40
G1.1
See p36-37 for Tray options
code IDMIV04
Price 30
CP Plastic Grid
58.5mm
110mm
24
105mm
2" Outlet
G2
See p37-38 for Tray options
H
For further technical information go to the Shower trays & enclosure specification guide. See pages 40, 45-47.
H1
! Pipe diameter 1 1/2 (40mm) ! Projection 45mm for coupling up H=40mm H1=80mm Outlet pipe height to centreline
SYMBOLS:
Bulk/oversized item Made to order (see P200)
PUMPED WASTE
P1
Pumped waste Tray options suitable for concrete floor construction
! Designed for use on a concrete floor installation ! Ideal application when a shower tray installation is required and it is not possible to utilise a gravity version due to the depth of a typical gravity trap. The Whale waste outlet and pipework can be sited into the screed requiring only a 45mm depth, therefore unaffecting a typical in-situ RC suspended floor and/or pre-cast concrete floor. ! For use with the following level access shower trays (pumped versions - low waste trays): - Sandwell range - Westdale range ! ! ! ! Can pump hair, gel, grit and other shower waste without blocking No filter in waste system - no cleaning required Valves integral to the pump prevent odours escaping from the drainage pipe Please contact the Technical Helpdesk for additional technical information Price 328 35
product Whale automatic tray gulley kit Whale pump mixer conversion kit (Flow switch & Y filter) required for shower mixer valve installation
For further technical information go to the Shower trays & enclosure specification guide. This section starts on page 52.
22mm/15mm speed fit connector 35mm 50mm diameter lower cup with 22mm side spigot 15mm diameter pipe to suit site conditions
Important: Dimension of 45mm (to underside of tray to be excavated to house waste collar)
119mm
SYMBOLS:
Bulk/oversized item
42
PUMPED WASTE
TYPICAL CROSS SECTION THROUGH LEVEL ACCESS SHOWER TRAY - CONCRETE FLOOR CONSTRUCTION
Sandwell / Westdale Level Access Shower Tray
P1
See p20 for Tray options
A Ceiling (room below) Typical 50-75mm screed B Cavity wall Underside of tray filled with foam construction 15mm copper waste 45mm approx. to suit pipe (To be routed away site conditions from tiled area)
NOTE. When installing use silicone on top of seal when positioning beneath the tray to ensure correct sealing.
Cross sectional view showing fitting of the Sandwell/ Westdale tray with the waste outlet
Sandwell/Westdale shower tray
Channel in floor for waste outlet and pipe 15mm copper waste pipe Whale Automatic Pumped Drainage Typical screed finish floor construction Shower base footprint
Notes: Dashed lines indicate alternate routes (these may vary other than those shown, dependent on site conditions) Tray to be recessed into the finished screed level - 20mm depth (Full installation instructions available at www.chilterninvadex.co.uk or by contacting the Technical Department)
SYMBOLS:
Bulk/oversized item Made to order (see P200)
PUMPED WASTE
P1
See p20 for Tray options
Important: An additional flow switch is required for a shower mixer valve installation connected into the hot water supply. The switch may be positioned horizontally or vertically.
The arrow indicated on the flow switch shows the direction of the water flow To transformer
SYMBOLS:
Bulk/oversized item
44
PUMPED WASTE
Digital smoothflow upgrade kit (upgrade to pump shown on p39)
! ! ! ! !
P1
See p20 for Tray options
Almost silent when running - eliminates gulley suction noise Suits any existing Whale installation Flow rate of the pump adjusts automatically to changes in the shower flow rate Compensates for changes in the voltage from the mains electric supply 2 year warranty
code IDWWP06
Price 368
SYMBOLS:
Bulk/oversized item Made to order (see P200)
PUMPED WASTE
Pumped waste suitable for concrete floor construction
TM
P1.1
See p36 for Tray options
(Whale Instant Match for use with Mira Advance Extra)
! Designed for use on a concrete floor installation ! Ideal application when a shower tray installation is required and it is not possible to utilise a gravity version due to the depth of a typical gravity trap. The Whale waste outlet and pipework can be sited into the screed requiring only a 45mm depth, therefore unaffecting a typical in-situ RC suspended floor and/or pre-cast concrete floor. ! Quiet gulley ! No set up required - plug and play ! No flow sensor/flow switch to fit ! For use with the following level access shower trays (pumped versions - low waste trays): - Sandwell range - Westdale range ! ! ! ! Can pump hair, gel, grit and other shower waste without blocking No filter in waste system - no cleaning required Valves integral to the pump prevent odours escaping from the drainage pipe Please contact the Technical Helpdesk for additional technical information
Important note: The Whale Instant Match pump/tray gulley kit can only be used with the Mira Advance Extra or Mira Advance Flex Extra. This is a different shower unit to the standard Mira, incorporating an internal shower flow sensor.
TM
code IDWWP07
product Pump/Tray gulley kit for use with Mira Advance Extra shower unit. Select the appropriate shower unit from the options shown below
colour White
Price 360
product Mira Advance Extra Thermostatic shower unit Mira Advance Flex Extra Thermostatic shower unit
SYMBOLS:
Bulk/oversized item
46
PUMPED WASTE
Whale Instant Match for use with Mira Advance Extra
The Whale Instant MatchTM automatically adjusts the pump speed in relation to the flow rate of the Mira Advance Extra Shower, as illustrated below.
TM
P1.1
See p36 for Tray options
2 3 Whale Instant Match Transformer increases and decreases the speed of the pump dependent on the shower flow rate
TM
Internal Shower Flow 1 Sensor measures the flow rate going to the shower head
The flow rate information is sent via a cable to the Whale Instant Match Transformer
TM
Matching the pump flow rate to the shower flow rate ensures that gulley suction noise is minimised
TM
! Quiet gulley ! No set up required - plug and play ! No flow sensor/flow switch to fit
SYMBOLS:
Bulk/oversized item Made to order (see P200)
P2
See p36-38 for Tray options
Kit illustrated
! Where access to drainage is difficult a shower waste pump allows waste water to be pumped away, without the need to rely on a gravity fall ! Suits all Chiltern Invadex shower trays (except Cardale which comes with its own pump) as shown below ! Quiet and filterless low voltage pump (12v) ! Simple to install and maintain ! Audible alarm to indicate blockages ! Pump lid snaps on and is easily removed for routine cleaning and maintenance
Shown recessed
TYPICAL CONCRETE/SCREED FLOOR CONSTRUCTION " " " " " " Supplied with integral pump " " " " ! ! ! !
product Standard Pump Kit, single unit Standard Pump Kit, box of 5 units Standard Pump Kit, box of 10+ units
STEP-IN
EASY ACCESS
each each
Package includes wiring block - which controls the pump manually, pump and necessary fittings & connections to the above floor outlet or Invawaste - see pages 39-40.
Technical Information
Notes: Flexi-pipe supplied (40mm) for flow into box. Flow outlet from box is 22mm Maximum 15 litres/min drainage (dependent on type of shower tray) Case constructed from white flame retardant ABS
Plan elevation
275 mm
160 mm
185mm 125mm
SYMBOLS:
Bulk/oversized item
48
P2
See p36-38 for Tray options
Rewire lead
Lid
Shower Tray
floor boards
Notes: Typical stack detail, waste hose running into standpipe with P-trap. Waste pipe laid is suitable gradient before running into hopper head, gulley or SVP.
711mm MAX Tank connector details Locking nut 508mm MIN 22mm outlet 125mm Rubber washer
1 1/2" Waste pipe connection
Please note: Chiltern Invadex can supply an automatic version of the Shower Waste Pump kit shown above. Please contact the Technical Helpdesk for assistance.
711mm MAX
SYMBOLS:
Bulk/oversized item Made to order (see P200)
P3
See p36 for Cardale MK2 Tray options
! Where access to drainage is difficult a Shower tray Integral waste pump allows waste water to be pumped away, without the need to rely on a gravity fall ! Supplied complete with cover, easily removed for routine cleaning and maintenance ! Quiet and filterless low voltage pump (12v) ! Simple to install and maintain ! Audible alarm to indicate blockages ! Stud wall minimum width - typically 75mm minimum to house 40mm stack pipe.
! Cardale MK2 shown left with 12v wiring block, integral pump, rewire lead and cover
For further technical information go to the Shower trays & enclosure specification guide (page 57)
Technical Information
Rewire lead
Maximum height from base of box to top of standpipe 711mm (28) down to a minimum height of waste discharge 508mm (20) will give maximum efficiency of the pump, with a suitable down gradient slope.
711mm MAX
22mm outlet
711mm MAX
508mm MIN
Notes: Typical stack detail, waste hose running into standpipe with P-trap. Waste pipe laid to suitable gradient before running into hopper head, gulley or SVP.
Pump cover
SYMBOLS:
Bulk/oversized item
50