Beruflich Dokumente
Kultur Dokumente
Repetitive peak off-state voltage, VDRM/VRRM 600 to 1000 V Triggering gate current, IGT 0.2 to 15 mA
K A G
K A G
K
Description
Available either in sensitive (TS1220) or standard (TN1215 / TYNx12) gate triggering levels, the 12 A SCR series is suitable to fit all modes of control, found in applications such as overvoltage crowbar protection, motor control circuits in power tools and kitchen aids, inrush current limiting circuits, capacitive discharge ignition and voltage regulation circuits. Available in through-hole or surface-mount packages, they provide an optimized performance in a limited space area.
A G
TO-220AB TS1220-xxxT
Table 1.
Device summary
Voltage (xxx) VDRM/VRRM Sensitivity IGT 15 mA 15 mA 15 mA 0.2 mA 0.2 mA 0.2 mA X X X X 15 mA 5 mA Package DPAK D2PAK IPAK DPAK IPAK TO-220AB TO-220AB TO-220AB
Order code 600 V TN1215-xxxB TN1215-xxxG TN1215-xxxH TS1220-xxxB TS1220-xxxH TS1220-xxxT TYNx12RG TYNx12TRG X X X X X X X X X 700 V 800 V X X X 1000 V
September 2011
1/13
www.st.com 13
Characteristics
1
Table 2.
Symbol
Characteristics
Absolute ratings (limiting values)
Value Parameter TN1215-G TN1215-B/-H TYNx12 TS1220-B/-H/T Tc = 105 C Tc = 105 C 145 Tj = 25 C Tj = 25 C Tj = 125 C Tj = 125 C Tj = 125 C 140 98 50 4 1 - 40 to + 150 - 40 to + 125 5 12 8 115 A 110 60 A2S A/s A W C V Unit
RMS on-state current (180 Conduction angle) Average on-state current (180 Conduction angle) Non repetitive surge peak on-state current It Value for fusing Critical rate of rise of on-state current IG = 2 x IGT, tr 100 ns Peak gate current Average gate power dissipation Storage junction temperature range Operating junction temperature range Maximum peak reverse gate voltage (for TN1215 and TYNx12 only) tp = 8.3 ms tp = 10 ms tp = 10 ms F = 60 Hz tp = 20 s
A A
Table 3.
Symbol IGT VGT VGD VRG IH IL dV/dt VTM Vt0 Rd IDRM IRRM
2/13
Characteristics
VD = 12 V
RL = 33
tp = 380 s
Table 5.
Symbol Rth(j-c)
Thermal resistance
Parameter Junction to case (DC) S
(1)
Value 1.3
Unit C/W
= 0.5
cm
70 45 C/W 100 60
Figure 1.
Figure 2.
P(W)
12 11 10 9 8 7 6 5 4 3 2 1 0 0 1 2 3 4 5 6 7
360
= 180
IT(AV)(A)
14
D.C.
12 10
= 180
8 6 4 2
IT(AV)(A)
8 9
Tcase(C)
0 0 25 50 75 100 125
3/13
Characteristics
Figure 3.
Figure 4.
IT(AV)(A)
3.0 2.5
D.C.
K=[Zth(j-c)/Rth(j-c)]
1.0
Device mounted on FR4 with recommended pad layout
2.0 1.5
= 180
D2PAK
0.5
1.0 0.5
DPAK
0.2
Tamb(C)
0.0 0 25 50 75 100 125
tp(s)
0.1 1E-3 1E-2 1E-1 1E+0
Figure 5.
Relative variation of thermal impedance junction to ambient versus pulse duration (DPAK)
Figure 6.
Relative variation of gate trigger and holding current versus junction temperature for TS1220 series
K=[Zth(j-a)/Rth(j-a)]
1.00
Device mounted on FR4 with recommended pad layout
DPAK
IGT,IH,IL[Tj] / IGT,IH,IL[Tj=25C]
2.0 1.8 1.6 1.4
IGT
D2PAK
1.2
TO-220AB / IPAK
0.10
tp(s)
0.01 1E-2 1E-1 1E+0 1E+1 1E+2 5E+2
Tj(C)
40 60 80 100 120 140
Figure 7.
Relative variation of gate trigger Figure 8. and holding current versus junction temperature
5.0 4.5
TN1215 and TYNx12 Series
IGT,IH,IL[Tj] / IGT,IH,IL[Tj=25C]
2.4 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 -40 -20 0 20 40 60 80 100 120 140
IH & IL IGT
IH[RGK] / IH[RGK=1k]
TS1220 Series
Tj = 25C
Tj(C)
RGK(k)
1E+0 1E+1
4/13
Characteristics
Figure 9.
Relative variation of dV/dt immunity Figure 10. Relative variation of dV/dt immunity versus gate-cathode resistance versus gate-cathode capacitance (typical values) for TS12 series (typical values) for TS12 series
dV/dt[CGK] / dV/dt[RGK=220]
4.0
Tj = 125C VD = 0.67 x VDRM
dV/dt[RGK] / dV/dt[RGK=220]
10.0
1.0
RGK(k)
0.1 0 200 400 600 800 1000 1200
0.5 0.0 0 25 50
CGK(nF)
75 100 125 150
Figure 11. Surge peak on-state current versus Figure 12. Non-repetitive surge peak on-state number of cycles current and corresponding values of It versus sinusoidal pulse width
ITSM(A)
150 140 130 120 110 100 90 80 70 60 50 40 30 20 10 0 1
2000
Tj initial = 25C
TS12
100
I2t
TN12 / TYN12
Number of cycles
10
tp(ms)
0.01 0.10 1.00 10.00
10
100
1000
Figure 13. On-state characteristics (maximum Figure 14. Thermal resistance junction to values) ambient versus copper surface under tab (DPAK and D2PAK)
ITM(A)
200 100
Tj max.: Vt0=0.85V Rd=30m
Rth(j-a)(C/W)
100
Epoxy printed circuit board FR4 copper thickness = 35 m
80
60
Tj=max
DPAK
10
Tj=25C
40
D2PAK
20
VTM(V)
1 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
S(cm)
0 0 2 4 6 8 10 12 14 16 18 20
5/13
12 T
RG
6/13
Package information
Package information
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark. Table 6. TO-220AB dimensions (devices TYNx12RG and TYNx12TRG)
Dimensions Ref. Millimeters Min. A
B I L F A I4 l3 a1 l2 c2 b2 C
Typ.
Max.
15.20 3.75 13.00 10.00 0.61 1.23 4.40 0.49 2.40 2.40 6.20 3.75
15.90 0.598
a1 a2 B b1 b2 C c1 c2
14.00 0.511 10.40 0.393 0.88 1.32 4.60 0.70 2.72 2.70 6.60 3.85 0.024 0.048 0.173 0.019 0.094 0.094 0.244 0.147
0.551 0.409 0.034 0.051 0.181 0.027 0.107 0.106 0.259 0.151
a2
e F
M
b1 e
c1
I I4 L l2 l3 M
15.80 16.40 16.80 0.622 0.646 0.661 2.65 1.14 1.14 2.60 2.95 1.70 1.70 0.104 0.044 0.044 0.102 0.116 0.066 0.066
7/13
Inches Min. 0.173 0.048 0.094 0.019 0.024 0.044 0.044 0.194 0.094 0.393 Max. 0.181 0.051 0.107 0.027 0.034 0.066 0.066 0.202 0.106 0.409
Max. 4.60 1.32 2.72 0.70 0.88 1.70 1.70 5.15 2.70 10.40
D E F F1 F2
L2 F2 F1 L9 L4 F G1 G M E D
G G1 H2 L2 L4 L5 L6 L7 L9 M Diam.
16.4 typ. 13 2.65 15.25 6.20 3.50 14 2.95 15.75 6.60 3.93
0.645 typ. 0.511 0.104 0.600 0.244 0.137 0.551 0.116 0.620 0.259 0.154
8/13
Package information
Inches Min. 0.086 0.035 0.027 0.025 0.204 Typ. Max. 0.094 0.043 0.051 0.035 0.212 0.037 0.035
Typ.
B B2 B3 B5
D
0.30 0.45 0.48 6 6.40 2.28 4.40 16.10 9 0.8 0.80 10 9.40 1.20 1 0.354 0.031 4.60 0.173 0.60 0.60 6.20 6.60 0.017 0.019 0.236 0.252
C C2
0.023 0.023 0.244 0.260 0.090 0.181 0.634 0.370 0.047 0.031 0.039 10
H L
L1
B3 B V1 A1
D E e
C A3
e G
B5
G H L L1 L2 V1
9/13
Inches Min. 0.086 0.035 0.001 0.025 0.204 0.017 0.018 0.236 0.251 0.173 0.368 Max. 0.094 0.043 0.009 0.035 0.212 0.023 0.023 0.244 0.259 0.181 0.397
Max. 2.40 1.10 0.23 0.90 5.40 0.60 0.60 6.20 6.60 4.60 10.10
2.20 0.90 0.03 0.64 5.20 0.45 0.48 6.00 6.40 4.40 9.35
A1 A2 B B2
D
H L4 B G A1
C C2
R C
D E
A2 0.60 MIN.
G H
V2
L2 L4 V2
1.6
10/13
Package information
Inches Min. 0.169 0.098 0.001 0.027 0.048 0.055 Typ. Max. 0.181 0.106 0.009 0.037
Typ.
4.30 2.49 0.03 0.70 1.25 0.45 1.21 8.95 10.00 4.88 15.00 1.27 1.40 0.40 0 1.40
A1 A2 B
D
L L3 A1
B2 C C2
B2 B G
D E
G L
V2
L2 L3 R V2
10.30 1.30
5.08
8.90
3.70
11/13
Ordering information
Ordering information
Table 11. Ordering information
Marking(1) TN12 15x00 TN12 15x00 TN1215x00G TN1215x00G TN12 15x00 TS12 20x00 TS12 20x00 TS12 20x00 TS1220600T TYNx12 TYNx12T Package DPAK DPAK D PAK D2PAK IPAK DPAK DPAK IPAK TO-220AB TO-220AB TO-220AB
2
Order code(1) TN1215-x00B TN1215-x00B-TR TN1215-x00G TN1215-x00G-TR TN1215-x00H TS1220-x00B TS1220-x00B-TR TS1220-x00H TS1220-x00T TYNx12RG TYNx12TRG
Weight 0.3 g 0.3 g 1.5 g 1.5 g 0.3 g 0.3 g 0.3 g 0.3 g 2.3 g 2.3 g 2.3 g
Base qty Delivery mode 75 2500 50 1000 75 75 2500 75 50 50 50 Tube Tape and reel Tube Tape and reel Tube Tube Tape and reel Tube Tube Tube Tube
Revision history
Table 12.
Date Sep-2000 25-Mar-2005 14-Oct-2005
08-Mar-2007 12-Oct-2009
6 7
12/13
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (ST) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to STs terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN STS TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USERS OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
2011 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
13/13