Beruflich Dokumente
Kultur Dokumente
1. Recommendations
NMT 534-00(e)
The feed is a precision component which should be handled with special care during installation. For instance, always carry the feed, supporting casting plate side. Any damage may degrade the antennas performance. Repair of feeds is not possible in the field.
2.
Feed disassembly
- Dismount the front part of the feed system (pre-assembled in factory). Remove the 4 socket screws M4 with SL washers A4 to split the feed system in 2 parts (Front & Rear) Front part of the feed system Depending of frequency, a tuning plate maybe pre-installed, (you do not need to removed it). Rear part of the feed system
3.
oa rd
db
ar
Sales department : Radio Frequency Systems GmbH Kabelkamp 20, D-30179 Hannover (Germany) Tel. +49-511 676-25 20 Fax +49-511 676-25 21 Plant: RFS France Trignac Fax +33 02 40 90 41 43
ar
db
oa rd
1/3
4.
5.
6.
Rear part
NMT 534-00e
2/3
Front part of the feed system (if the feed is equipped with a tuning plate, you do not need to remove it)
- Install the front part of the feed on the rear part, with the 4 M4 screws (refer to the previous pages for feeds system polarization)
7.
dj us t.
.A
r la Po 5
r la Po 5
8.
NMT 534-00e
.A
dj us t.
3/3