Beruflich Dokumente
Kultur Dokumente
com
8. Remove using the pin, rotate 180, re-insert and repeat the process.
2. Insert small canister solenoid into no.1 end of the dual holding xture.
3. Use the opening tool to roll back the canister lip, rotating FIRST anti clockwise, THEN in a clockwise direction.
4. Remove the turret and valve section, followed by all internal parts for cleaning.
8. Use the pin to remove and rotate the canister 180. Reinsert and repeat the process.
3. Use the opening tool to roll back the canister lip, rotating FIRST anti clockwise, THEN in a clockwise direction.
12. Align the larger of the two notches on the turret with the slot on the closing tool.