Beruflich Dokumente
Kultur Dokumente
ADS SPECIFICATIONS
TABLE OF CONTENTS
ADS N-12 ST IB Pipe Specification ........................................... 1-2 ADS N-12 WT IB Pipe Specification .......................................... 1-4 ADS N-12 Plain End Pipe Specification ..................................... 1-6 ADS Low Head Pipe Specification ................................................ 1-7 ADS SaniTite Pipe Specification.................................................. 1-9 ADS Single Wall Highway Pipe Specification ............................. 1-11 ADS Single Wall Heavy Duty Specification................................. 1-12 ADS Grain-Aire Pipe Specification............................................ 1-13 ADS AdvanEDGE Pipe Specification........................................ 1-14 ADS SB2 Pipe Specification...................................................... 1-15 ADS GEO-flow Pipe Specification ..........................................1-16 ADS 3000 TripleWall Pipe Specification .................................. 1-17 ADS DURASLOT Pipe Specification ........................................ 1-18 MAR MAC Polyseal Repair Coupler Specification ................... 1-19 ADS WaterStop Specification.................................................. 1-20 ADS Flared End Section Specification........................................ 1-21 ADS BioDiffuser ARC 36 Septic Leaching Chamber Specification ................................................................ 1-22 ADS BioDiffuser Specification ................................................. 1-23
Pipe Dimensions
Nominal Diameter, in (mm) Pipe I.D. 4 6 8 10 12 15 18 24 30 36 42 48 60 in (mm) (100) (150) (200) (250) (300) (375) (450) (600) (750) (900) (1050) (1200) (1500) Pipe O.D.* 4.8 6.9 9.1 11.4 14.5 18 21 28 36 42 48 54 67 in (mm) (122) (175) (231) (290) (368) (457) (559) (711) (914) (1067) (1219) (1372) (1702) *Pipe O.D. values are provided for reference purposes only, values stated for 12- through 60-inch are 1 inch. Contact Applications Engineering for exact values.
Pipe O.D. 35.1 41.7 in. (mm) (762) (1059) Inner Liner Thickness 0.07 0.095 Minimum (18) (24) in. (mm) Min. Pipe Stiffness 28 22 @5% Deflection (195) (150) 2 #/in./in. (kN/m ) *Values provided are for reference purposes only. *Check with sales representative for availability by region.
Pipe OD
Pipe ID
Inner Liner
30 60 (750mm 1500mm)
Pipe O.D. 35.1 41.7 53.6 66.3 in. (mm) (762) (1059) (1361) (1684) Inner Liner Thickness 0.07 0.095 0.105 0.105 Minimum (18) (24) (27) (27) in. (mm) Min. Pipe Stiffness 28 22 18 14 @5% Deflection (195) (150) (125) (95) 2 #/in./in. (kN/m ) *Values provided are for reference purposes only. *Check with sales representative for availability by region.
Pipe OD
Pipe ID
Inner Liner
30 60 (750mm 1500mm)
Protective Screen:
Material Bursting Strength (lbs/in ) Weight (oz/yd ) % Open Area Tensile Strength (lbs) (Grab Test)
2 2
Polypropylene 484 5.3 25 425 (Wrap) 273 (Fill) ASTM D3786 ASTM D3776 ASTM D475 ASTM D5034
Water Inlet Area (Min), in /ft 15 *Values provided are for reference purposes only.
Filter Fabric
Fabric Properties Grab Tensile Strength (lbs.) (weakest principle direction) Grab Elongation (%) (weakest principle direction) Trapezoidal Tear (lbs.) (weakest principle direction) Puncture (lbs.) Permittivity (sec ) AOS (U.S. Sieve Size) U.V. Resistance
-1
Test Method ASTM D4632 ASTM D4633 ASTM D4533 ASTM D3786 ASTM D4491 ASTM D4751 ASTM D4355
Joint Performance Pipe shall be joined with internal or external snap couplers covering at least two (2) full corrugations on each end of the pipe. Fittings Fittings shall conform to ASTM F667. Material Properties Pipe material shall be high density polyethylene conforming with the minimum requirements of cell classification 424410C as defined and described in ASTM D3350. Septic Fabric Properties
Material Fabric Fiber Size (denier per filament) Weight (ounces per yd , ASTM D3776) Burst Strength (pounds per in , ASTM D3786) Air Permeability (CFM per ft , ASTM D737) Equivalent Opening Size (Army Corps of Engineers, W 02215) Water Flow Rate (gal/min/ft , ASTM D4491) Melt Temperature (ASTM D3786)
2 2 2 2
Installation Installation shall be in accordance with ADS installation instructions (ADS Product Note 3.111) and those issued by a local health department. For leachfield applications, installation shall be in accordance with ASTM F481 and as regulated by regional, state, and local agencies. Proper authorization for specific applications and designs should be obtained prior to installation to ensure suitability in certain locales. Contact your local ADS representative or visit our website at www.ads-pipe.com for a copy of the installation guidelines.
4 Oz. Geotextile
Property Fiber Substrate Weight Thickness Tensile Specification Polyester None 2 2 4.0 oz/yd +/- 0.04 oz/yd 0.065 inch +/- 0.010 inch Warp: 52 lb min. Fill: 68 lb min. Test Method --FTM NW503 FTM NW504 FTM NW505
Installation Installation shall be in accordance with ADS installation instructions (ADS Product Note 3.150) and those issued by a local health department. For leachfield applications, installation shall be in accordance with ASTM F481 and as regulated by regional, state, and local agencies. Proper authorization for specific applications and designs should be obtained prior to installation to ensure suitability in certain locales. Contact your local ADS representative or visit our website at www.ads-pipe.com for a copy of the installation guidelines.
Bell End
Spigot
I.D.
O.D.
Nominal Pipe Size, in (mm) Average Outside Diameter, in. (mm) Average Inside Diameter, in. (mm)
2.5" (Residential and Pedestrian Applications) 6" (H-20 Loading) 1.25" (4") 1.75" (6" - 42")
Pipe Size 12 15 18 24 30 36 42 48 60
Min. Distance Pipe Invert to Structure Invert, in 3.7 4 4.2 4.5 5.2 5.5 5.7 5.7 6.4
A 6.50 in (165 mm) 6.50 in (165 mm) 7.50 in (191 mm) 7.50 in (191 mm) 7.50 in (191 mm) 7.50 in (191 mm)
B (max) 10.00 in (254 mm) 10.00 in (254 mm) 15.00 in (381 mm) 18.00 in (457 mm) 12.00 in (305 mm) 25.00 in (635 mm)
H 6.50 in (165 mm) 6.50 in (165 mm) 6.50 in (165 mm) 6.50 in (165 mm) 8.60 in (218 mm) 8.60 in (218 mm)
L 25.00 in (635 mm) 25.00 in (635 mm) 32.00 in (813 mm) 36.00 in (914 mm) 58.00 in (1473 mm) 58.00 in (1473 mm)
W 29.00 in (737 mm) 29.00 in (737 mm) 35.00 in (889 mm) 45.00 in (1143 mm) 63.00 in (1600 mm) 63.00 in (1600 mm)
1510NP
15 in (375 mm)
1810NP
2410NP
3015NP
30 in (750 mm)
3615NP
36 in (900 mm)
B D A
C
B
C B D
Bio 2 Chamber
E
B A
Bio 3 Chamber
B D
Chambers ADS Product # Length (A) Repeat Length (E) Side Wall Height (B) Overall Height (C) Overall Width (D) Units/Pallet Truck Load Quantity*