Beruflich Dokumente
Kultur Dokumente
OEG
-SS
-1
Ordering Information
12
General Purpose Relays ,000 Typical Part Number B SDT PCB Relays Miniature PCB Relay SDT
-SS
-1
Ordering Information
12
1. Basic Series: SDT = Miniature Power PC board relay. 2. Enclosure: SS = Vented (Flux-tight) * plastic cover. SH = Sealed, plastic case.
n 10A contact rating 3. Termination: n UL
1. Basic Series: SDT = Miniature Power PC board relay. 2. Enclosure: SS = Vented (Flux-tight) * plastic cover. SH = Sealed, plastic case. 3. Termination: 1 = 1 pole
1 = 1 pole TV-5 rating 4. Coil Voltage: n 1 form A contact arrangement 05 = 5VDC 09 = 9VDC n Flux proof, avaialable 06 =wash 6VDCtight version 12 = 12VDC 5. Coil Input: D = Standard 6. Contact Arrangement: M = 1 Form A, SPST-NO
24 = 24VDC 48 = 48VDC
09 = 9VDC 12 = 12VDC
24 = 24VDC 48 = 48VDC
Typical applications ,000 = Standard model Other Suffix = Custom model Appliances, HVAC, cable TV, monitor, emergency lighting
* Not suitable for immersion cleaning processes.
7. Suffix:
ems in stock for immediate delivery. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. are more likely t Our authorized distributors
None at present. None at present.
Zt
Contact arrangement 1 Form A (NO) Rated voltage 250VAC, 24VDC .984 .02 Max. switching voltage (25.0 250VAC, 24VDC .5) Rated current 10A Contact material AgSnOInO Min. recommended contact load 100mA at 5VDC Frequency of operation 800 ops./h Operate/release time max. 15/8ms d Layout (Bottom View) Electrical endurance 10A 250VAC/24VDC resistive, -30C to +60C 100x103 ops. .018 .05 DIA (.4) TV-5 120VAC, 25x103 .012 ops. .031 (1.3) .018 6 operations (.3) (.8) Mechanical endurance, DC coil 10x10 (.45)
Contact Data
Coil Rated coil resistance power 10% mW 16.7 540 .984 .02 46.3 (25.0540 .5) 66.7 540 150 540 267 540 600 540 1067 540 4267 540
.012 (.3) (.4) .031 (.8)
All gures are given for coil without pre-energization, at ambient temperature +23C .018
Insulation Data
Coil Data
Coil voltage range .295 .010 3 to 48VDC .409 .02 .38 .004 Operative range, IEC 61810 (7.5 .25) (10.4 1 .5) (3.5 .1) Coil insulation system according UL Class E
.646 .012 (16.4 .3) .38 .008 (3.5 .2) .100 (2.55)
Initial dielectric strength .96 .02 .295 .004 between open contacts (7.5(24.4 900Vrms .1) .5) between contact and coil 4000Vrms Clearance/creepage .295 .010 .409 .02 .646 .004 .38 .004 between contact and coil (3.5 .1) >1.6/3.2mm (7.5 .25) (10.4 .5) (16.4 .1)
.646 .012 (16.4 .3) .38 .008 (3.5 .2) .100 (2.55)
.018 (.45)
Reference Data
Life Expectancy Operating Voltage Electrical endurance
100 180 160 140 120 100 80 60 40 20 0 0 2 1 -40 -20 0 3 5 6 1407 20 40 4 60 80 100 120 0.2 0.4 0.6 1A Operating Votage Range 5A Cool Coil
Hot Coil Applied
Reference Data
Operate Time Operate time
12 5A 250VAC, 30VDC Maximum Resistive Allowable Coil Voltage
Oper
12 250VAC, 30VDC Maximum Resistive Allowable Coil Voltage 1A
10
Operation (x 104)
Operate Time
10
Time (msec)
1A
10
6 4 2
Time (msec)
7
8 6 4 2
Cool Coil
Hot Coil Applied
Pick-Up Voltage
Pick-Up Voltage
1.4
5 140 4 100 120 6 0 220 403 60 80 Contact Current (A) Ambient Temp. (C)
Note: This data is based on the max. allowable temperature for E type insulation coil (115C).
Note: This data is based on the max. allowable temperature for E type insulation coil (115C).
cifications and availability Dimensions are shown for ject to change. reference purposes only.
www.tycoelectronics.com Dimensions are in inches over Technical support:(millimeters) unless otherwise 475 Refer to inside back cover. specified.
Specifications and availability Dimensions are shown for subject to change. reference purposes only.
www.tycoelectronics.com Dimensions are in inc Technical support: (millimeters) unless o 47 Refer to inside back cover. specified.
04-2011, Rev. 0411 www.te.com 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company
Datasheets and product specication according to IEC 61810-1 and to be used only together with the Denitions section.
Datasheets and product data is subject to the terms of the disclaimer and all chapters of the Denitions section, available at http://relays.te.com/definitions
Datasheets, product data, Denitions section, application notes and all specications are subject to change.
Issued 3-03
y.
r.
SDT
-SS
lay.
,000
OEG
Miniature PCB Relay SDT (Continued) Our authorized distributors are more likely to maintain the fo
None at present.
Outline Dimensions Dimensions Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content 24 = 24VDC refer to the Product Compliance Support Center at 48 = 48VDC www.te.com/customersupport/rohssupportcenter Ambient temperature -30C to +60C Category fix = Custom model of environmental protection IEC 61810 RTII - ux proof, RTIII - wash tight Shock resistance (functional) 10g Shock resistance the (destructive) 100g more likely to maintain following items in stock for immediate delivery. Weight 11g Suffix = Custom model Resistance to soldering heat THT s. IEC 60068-2-20 RTII: 270C/10s RTIII: 260C/5s Wiring Diagram (Bottom View) Packaging/unit pcs., carton box/1000 pcs. delivery. more likely to maintain the following tube/25 items in stock for immediate tray/100 pcs., carton box/1000 pcs. Other Data
.018 (.45) .012 (.3)
.018 (.4)
.031 (.8)
.031 (.8)
.96 .02 (24.4 .5) .295 .010 .409 .02 (7.5 .25) (10.4 .5) .646 .012 (16.4 .3) .38 .008 (3.5 .2) .100 (2.55)
2 )
.02 .5)
.031 (.8)
Reference Data
Operating Voltage
180
Operate Time
12
.031 (.8)
10
Time (msec)
8 6
Cool Coil
12
4 2
,000
Pick-Up Voltage
.008 .2)
Time (msec)
40
Basic type SDT Miniature PCB Relay SDT Operate Time Life Expectancy Enclosure 100 12 SS Flux proof, vented plastic cover SH Wash tight, sealed plastic cover 10 Number of poles Operate Time 8 1 Time 1 pole Operate Life Expectancy Coil 100 12 voltage 6 Coil code: please refer to coil versions table (e.g. 10 05=5VDC) Coil 10 input Operate Time 4 D Standard 8 Contact arrangement 2 M 1 form A (NO) contact Release Time 10 6 Sufx 1 ,000 Standard
0.2 on request 0.6 4 types Other 2 0.4 0.8 1.0 1.2 1.4 0 1 2 Coil Power (W) Release Time 0.4 1 0 2
Ambient Temp. (C) 250VAC, 30VDC Note: This data is based on the max. allowable Resistive temperature for E type insulation coil (115C).
Coil Pow
Time (msec)
1.0 1.2 1.4 140 Specifications and availability imensions are in over 0.2code 0.6 0.8 inches Product Enclosure Coil voltage 1 millimeters) unless otherwise Coil Power (W) SDT-SH-112DM,000 Washsubject tight to change. 12VDC pecified.
A 475 (NO) Standard SDT-SH-124DM,000 24VDC SDT-SS-105DM,000 Flux proof 5VDC SDT-SS-109DM,000 9VDC Specifications and availability www.tycoelectronics.com Dimensions are in inches over SDT-SS-112DM,000 12VDC subject to change. 24VDC Technical support: (millimeters) unless otherwise 475 SDT-SS-124DM,000
Refer to inside back cover. specified. Refer to inside back cover.
Sufx
Part number
1419126-5 1-1419126-0 1-1419126-2 1-1419126-5 1-1419126-8 2-1419126-5
04-2011, Rev. 0411 www.te.com 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company
Datasheets and product specication according to IEC 61810-1 and to be used only together with the Denitions section.
Datasheets and product data is subject to the terms of the disclaimer and all chapters of the Denitions section, available at http://relays.te.com/definitions
Datasheets, product data, Denitions section, application notes and all specications are subject to change.