Beruflich Dokumente
Kultur Dokumente
CMOS compatible input Thermal shutdown Shorted load protection Undervoltage and overvoltage shutdown Protection against loss of ground Very low standby current Compliance to 61000-4-4 IEC test up to 4 kV Open drain status output
Description
The VN751PT is a monolithic device designed in STMicroelectronics VIPower M0-3 technology, intended for driving any kind of load with one side connected to ground. Active VCC pin voltage clamp protects the device against low energy spikes. Active current limitation combined with thermal shutdown and automatic restart protect the device against overload. Device automatically turns off in case of ground pin disconnection. This device is especially suitable for industrial applications in conformity with IEC 61131-2 programmable controllers international standard.
Figure 1.
Block diagram
VCC
VCC CLAMP
GND
Power CLAMP
OVERTEMPERATURE DETECTION
November 2009
1/17
www.st.com 17
Contents
VN751PT
Contents
1 2 3 4 5 6 7 8 9 10 Maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Pin connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Waveforms and truth table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Application schematic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Reverse polarity protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Order code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2/17
VN751PT
Maximum ratings
Maximum ratings
Table 1.
Symbol VCC - VCC - IGND IOUT - IOUT IIN ISTAT VESD Ptot TJ Tc Tstg EAS
Table 2.
Symbol RthJA RthJC
Thermal data
Parameter Thermal resistance junction-ambient Thermal resistance junction-case
2
1. When mounted on a FR-4 printed circuit board with 0.5 cm of Cu (at least 35m thick) connected to all VCC pins.
3/17
Pin connections
VN751PT
Pin connections
Figure 2. Connection diagram (top view)
Figure 3.
4/17
VN751PT
Electrical characteristics
Electrical characteristics
8 V < VCC < 36 V; -40 C < TJ < 125 C, unless otherwise specified Table 3.
Symbol VCC VUSD VOV RON
Power
Parameter Operating supply voltage Undervoltage shut-down Overvoltage shut-down On state resistance IOUT = 2 A; TJ = 25 C IOUT = 2 A Off state; VCC = 24 V; TCASE =25 C 10 1.5 Test conditions Min Typ Max Unit 5.5 3 36 60 180 20 1.8 0 10 4 36 5.5 V V V m m A mA mA A
IS
Supply current
IL(off)
Table 4.
Symbol td(on) td(off)
Switching ( VCC = 24 V )
Parameter Turn-on delay time Test conditions RL = 12 from VIN rising edge to VOUT = 2.4 V RL = 12 from VIN falling edge to VOUT = 21.6 V RL = 12 from VOUT = 2.4 V to VOUT = 19.2 V RL = 12 from VOUT = 21.6 V to VOUT = 2.4 V Min Typ Max Unit 12 s s V/s V/s
35
dVOUT/dt(on) Turn -on voltage slope dVOUT/dt(off) Turn -off voltage slope
0.80
0.30
5/17
VN751PT
Input pin
Parameter Input low level Low level input current Input high level High level input current Input hysteresis voltage Input current Input clamp voltage VIN = VCC = 5 V IIN = 1 mA IIN = -1 mA 6 6.8 -0.7 VIN = 3.25 V 0.5 10 8 VIN = 1.25 V 1 3.25 10 Test conditions Min Typ Max Unit 1.25 V A V A V A V V
Table 6.
Symbol VSTAT ILSTAT CSTAT VSCL
Status pin
Parameter Status low output voltage Status leakage current Status pin input capacitance Status clamp voltage Test conditions ISTAT = 1.6 mA Normal operation; VSTAT = 5 V Normal operation; VSTAT = 5 V ISTAT = 1 mA; ISTAT =-1 mA 6 6.8 -0.7 Min Typ Max 0.5 10 100 8 Unit V A pF V V
Table 7.
Symbol TTSD TR Thyst Ilim
Protections
Parameter Shut-down temperature Reset temperature Thermal hysteresis Current limitation Turn-off output clamp voltage VCC = 24 V, RLOAD = 10 m, t = 0.4 ms RL =12 ; L = 6 mH Test conditions Min 150 135 7 2.7 VCC47 VCC52 20 6.0 VCC57 Typ 175 Max Unit 200 C C C A
Vdemag
6/17
VN751PT
dVOUT/dt(on) 10%
dVOUT/dt(off)
t
VIN td(on) td(off)
Table 8.
Truth table
Input L H L H H L H L H L H Output L H L X X L L L L L L Status H H H (TJ < TTSD) H (TJ > TTSD) L H L X X H H
Current limitation
7/17
VN751PT
undefined
TTSD TR
OVERTEMPERATURE
8/17
VN751PT
Test circuit
Test circuit
Figure 6. Peak short circuit current test circuit
Figure 7.
9/17
Application schematic
VN751PT
Application schematic
Figure 8. Application schematic
10/17
VN751PT
RGND (Optional)
Load
11/17
VN751PT
12/17
VN751PT
Table 9.
Package weight
13/17
VN751PT
14/17
VN751PT
Order code
Order code
Table 10. Order codes
Order codes VN751PT PPAK VN751PTTR Tape and reel Package Packaging Tube
15/17
Revision history
VN751PT
10
Revision history
Table 11.
Date 07-Mar-2006 31-Mar-2006 10-Jul-2006 12-Mar-2007 15-May-2007 18-Sep-2007 08-Jul-2008 30-Nov-2009
16/17
VN751PT
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (ST) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to STs terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN STS TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USERS OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
2009 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
17/17