Beruflich Dokumente
Kultur Dokumente
Fan powered diffusers with integrated high efficiency filters for critical applications requiring additional static pressure boost.
Quiet, low heat, energy efcient ECM motor programmed for constant ow
LED kits for convenient roomside visual of lter condition and motor status
www.price-hvac.com for additional product information, including product videos and brochures.
Product Information
Price FFU Series modules consist of a fan/ motor assembly and high efficiency HEPA/ ULPA filter. The modules are designed to provide filtered, unidirectional vertical air flow over a cleanroom space. Price fan filter units are recommended for use in all types of cleanroom environments semiconductor and microelectronics manufacturing facilities, as well as pharmaceutical and medical labs. The product is designed for use in Class 10 through Class 100,000 cleanroom spaces. High capacity (FFU-HC) units offer the largest active filter area and the highest air flow capacity of all Price fan filter units. Removable filters allow for periodic filter changes (filter removal and replacement requires access to the ceiling plenum), and an expanded metal mesh screen protects the filter media from inadvertent damage during installation. Filter face is PSL tested post-assembly. Room-Side-Removable (FFU/FFUSS) units offer the convenience and flexibility to periodically replace filters from the roomside of installed modules. All RSR units are PAO tested to ensure the knife-edge frame is completely sealed. Filters are latched in place such that the continuously welded knife-edge is embedded into the filter gel seal, creating a leak-proof barrier. Additional benefits include optional roomside removable motors and 3/8 in. NPT aerosol injection ports. Once installed, the filter is protected by a perforated face that is secured to the main assembly using quarterturn fasteners. ECM motor technology is an available option on all Price fan filter units. Key benefits of these motors include: Lower energy use. Lower operating temperatures. Programmed to deliver constant air volume, independent of filter condition. Features Quiet operation - High efficiency soundabsorbing foam liners and Motors mounted with vibration isolators. Non-ducted modules are ETL certified to UL507 standard. Ducted modules are ETL certified to UL1995 standard (with optional plenum rated polymer foam insulation). FFU - Room-Side Replaceable Construction FFU-HC - High Capacity Construction
Filter Retainers
Four (4) thumb wheel retaining latches hold the filter in place and allow for easy filter replacement without the need for tools. Unique adjustable latch design does not penetrate the knife-edge, further reducing the risk of leaks.
All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimeter.
E-141
CRITICAL ENVIRONMENTS
Product Information
Standard Features (all FFU types) UL900 certified filters. Integral fan/motor assembly. Blower wheel is directly driven by PSC thermally protected motor. Blower wheel is encased in an engineered enclosure to optimize capacity and reduce noise. 25-30% efficient washable prefilter (MERV4). Lined with foam insulation to reduce sound levels. Solid state speed control. Eyebolts at each plenum corner for support from above. FFU-HC Unit Features Replaceable HEPA (99.99% efficiency on 0.3 um particles) filter requires access above ceiling. Expanded metal mesh screen protects filter media. Largest active filter area. Filter face is PSL Tested post-assembly. FFU Room-Side Replaceable Features Room-side replaceable HEPA filter (minimum 99.99% efficiency on 0.3 m particles). Knife-edge frame for gel filter seal. Perforated laminar flow face with easy access turn fasteners. All units factory PAO tested to ensure casing leakage is consistent with the filter. Walkable Plenum (up to 250lbs) aluminum FFU. Static pressure port. 3/8 in. NPT aerosol injection port (optional). Washable Pre-Filter (non-ducted units). Options (FFU and FFU-HC) 1/3 HP ECM - energy efficient motor programmed for constant flow. ULPA filter (minimum 99.9995% efficiency on 0.12 m particles) recommended with ECM motor. 115V, 208V, 240V and 277V supply voltages (115, 240, 277 for ECM). 10 in. or 12 in. diameter inlet collar for direct connection to conditioned air. 8 ft power cord (115V, 277V (nonducted)). Ion bar for neutralizing static charges (optional). Washable Pre-Filter (ducted units). Construction / Finish Plenum 14 gauge mill finish aluminum (optional powder coat finishes available. 20 gauge stainless steel (2B polished finish) RSR units only. FFU-HC
G L W
CRITICAL ENVIRONMENTS
G H L W
H PSC 14 1/4 (362) 15 1/4 (387)* ECM 16 1/2 (419) 17 1/2 (445)*
* 3 lter media.
Face - HC Units Aluminum frame w/expanded mesh screen protecting filter media. Face - RSR Units Aluminum perforated face 16 gauge mill finish aluminum (optional powder coat or anodized finishes available). Stainless steel perforated face 20 gauge stainless steel (#4 brushed finish).
E-142
All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimeter.
Unit Size 2x4 2x4 2x4 2x4 2x4 2x4 2x4 2x4 2x3 2x3 2x3 2x3 2x3 2x3 2x3 2x3 2x2 2x2 2x2 2x2
Filter Type HEPA HEPA HEPA HEPA ULPA ULPA ULPA ULPA HEPA HEPA HEPA HEPA ULPA ULPA ULPA ULPA HEPA HEPA HEPA HEPA
Max Amps 4.7 1.6 1.7 1.8 4.9 1.7 1.9 1.8 3.9 1.7 1.8 1.7 3.9 1.7 1.8 1.7 3.0 1.4 1.5 1.3
ECM Motor Operating* Motor Range Amps @ HP Voltage FPM 90FPM 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 115 240 277 115 204 277 115 240 277 115 240 277 115 240 277 115 240 277 60 - 140 60 - 140 60 - 140 60 - 115 60 - 115 60 - 115 60 - 140 60 - 140 60 - 140 60 - 140 60 - 140 60 - 140 60 - 140 60 - 140 60 - 140 60 - 140 60 - 140 60 - 140 1.8 0.8 0.8 2.4 1.1 1.1 0.8 0.3 0.3 1.0 0.4 0.4 1.3 0.6 0.4 1.5 0.7 0.6 Sensible Heat Watts @ (BTU/HR) 90FPM @ 90FPM 140 120 140 180 180 200 48 42 48 60 60 58 90 80 70 100 110 100 400 400 400 461 461 461 304 304 304 304 304 304 160 160 160 160 160 160 Total Unit Weight Max (approx) Static Lb (kg) Pressure 75 (34) 75 (34) 75 (34) 75 (34) 75 (34) 75 (34) 53 (24) 53 (24) 53 (24) 53 (24) 53 (24) 53 (24) 55 (25) 55 (25) 55 (25) 55 (25) 55 (25) 55 (25) 1.0 1.0 1.0 1.1 1.1 1.1 1.4 1.4 1.5 1.8 1.8 1.8 0.9 0.9 0.9 1.0 1.0 1.0 Sound Level dBA 52 52 52 54 54 54 44 44 44 45 45 45 52 52 52 52 52 52
Unit Size 2x4 2x4 2x4 2x4 2x4 2x4 2x3 2x3 2x3 2x3 2x3 2x3 2x2 2x2 2x2 2x2 2x2 2x2
Filter Type HEPA HEPA HEPA ULPA ULPA ULPA HEPA HEPA HEPA ULPA ULPA ULPA HEPA HEPA HEPA ULPA ULPA ULPA
Max Amps 4.7 2.5 2.1 5.0 2.2 1.9 5.9 2.4 2.1 5.5 2.3 2.1 3.5 1.6 1.4 3.3 1.4 1.3
* To determine Air Flowrate in CFM, multiply operating range velocity (fpm) by the lter face area, (2x4 = 5.04ft2, 2x3 = 4.31ft2, 2x3 = 3.59ft2, 2x2 = 2.13ft2) do not select at high velocity end as it is rated with clean lter only. It is not recommended to have a lter face velocity exceeding 140 fpm. Above this point lter efciency decreases.
All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimeter.
E-139
CRITICAL ENVIRONMENTS
Nominal Unit Size 2x4 2x4 2x4 2x2 2x2 2x2 2x4 2x4 2x4 2x2 2x2 2x2
CRITICAL ENVIRONMENTS
Motor Type PSC PSC PSC PSC PSC PSC ECM ECM ECM ECM ECM ECM
Voltage (Volts) 115 240 277 115 240 277 115 240 277 115 240 277
Weight (lbs) 65 65 65 42 42 42 65 65 65 42 42 42
* To determine Flowrate (Capacity) in CFM, multiply lter face velocity (FPM) by the lter face area. ** Sensible Heat: BTU = Watts X 3.413 It is not recommended to have a lter face velocity exceeding 140 FPM. Above this point, lter efciency decreases.
Performance
Average velocity The unit will provide ltered air at an average velocity of 90 FPM (+/-15 FPM). FFU Performance notes: 1. Units are tested in accordance with IEST RP-CC002.2, Recommended Practice for Unidirectional Flow Clean-Air Devices. 2. Sound levels were measured with unit installed in a T-Bar ceiling, with gasket, in a standard room. Sound levels in dBA were measured at a distance of 30 inches from the lter face, with the unit set to produce 90 fpm average face velocity. (Note that data is for a clean lter only. If fan speed is increased to compensate for lter loading the noise level will increase.) 3. Amp and Watt ratings are based on a unit with a clean lter. 4. Max Static Pressure - The maximum static pressure drop in inches w.g. produced across the unit while maintaining a face velocity of 90 fpm at maximum motor speed. FFU-HC Performance notes: 1. Units are tested in accordance with IEST RP-CC002.2, Recommended Practice for Unidirectional Flow Clean-Air Devices. 2. Airow measured in accordance with the (ANSI/AMCA 210-07), (ANSI/ASHRAE 51-07) test standards for Certied Aerodynamic Performance Rating. 3. Sound levels were measured with unit installed in a T-Bar ceiling, with gasket, in a standard room. Sound levels in dBA were measured at a distance of 30 inches from the lter face, with the unit set to produce 90 fpm average face velocity. (Note that data is for a clean lter only. If fan speed is increased to compensate for lter loading the noise level will increase.) 4. Amp and Watt ratings are based on a unit with a clean lter.
E-140
All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimeter.
Min.
0.45 0.40 0.35 0.30
Filter Loading Additional Static Pressure, inches w.g. Filter Loading Additional Static Pressure, inches w.g. Filter Loading Additional Static Pressure, inches w.g. Filter Loading Additional Static Pressure, inches w.g.
0.50
Min.
0.45 0.40 0.35 0.30
90 FPM
Max.
Min.
90 FPM
Max.
Min.
90 FPM
Max.
150
ilt %F
er L
oad
50%
Fil
ter
Lo
ad
300
350
400
450
500
300
Lo
ad
350
400
450
500
0.15 FFU-HC 2x4 ECM 0.50 0.10 0.45 0.05 0.40 0.00 0 0.35 0.30
150
Min.
%F
0.15 FFU-HC 2x4 PSC 0.50 0.10 0.45 0.05 0.40 0.00 0 0.35 0.30
90 FPM
Constant Air Flow
Max.
Min.
90 FPM
Max.
50
100
150
200
250
300
350
400
450
500
50
100
150
200
250
300
350
400
450
500
150%
o 90 ter L ilFPM F
ad
0.50 0.20 0.45 0.15 0.40 0.10 0.35 0.05 0.30 0.00 0.25 200 0.20 0.15 0.10 0.05 0.00 200 300 400 500 600 700 800
Max.
Min.
90 FPM
Max.
150
%F
ilte
r Lo
ad
600
700
800
900
FFU-HC 2x4
450 400 350
300 400
450
300
500
600
700
800
900
300
500
600
700
800
Power (W)
Power (W)
FFU-HC 2x2
250
PS
FFU-HC 2x4
450 400 350 300 200 150 100 50 0
250
PS
EC
EC
Power (W)
Power (W)
50
100
150
200
250
300
PS
C
350 400 450 500 250 200 150 100 50 0
100
200
300
400
500
PS
C
600 700 800 900
EC
EC
50
100
150
200
250
300
350
400
450
500
100
200
300
400
500
600
700
800
900
All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimeter.
E-141
CRITICAL ENVIRONMENTS
ECM Technology
Electronically Commutated Motors (ECM) are optional on all FFU Series modules. These brushless DC motors include a built-in inverter and microprocessor-based motor control. The ECM motor includes several features that make them superior to conventional electric motors: Factory set fan flow Energy efficient operation Long motor and filter life Programmable Wide operating range Low heat generation Quiet operation As lter pressure increases with use, the ECM motor automatically compensates with increased speed to maintain a constant ow of supply air. ECM
Options
Ion Bar Option Ion bars are easily fastened to the FFU perforated face and provide ionization to help statically neutralize the air and work surfaces serviced by the FFU. Many industries use ion bars as a portion of their defense against electrostatic discharge damage to sensitive electronic components. 24 VAC input power Silicon emitters Steady-DC ion emission Available in 11 , 22 and 44 lengths. Note: * 60 FPM airflow velocity required at ion bar for proper operation. ** Not available for FFU-HC. FFU with Ion Bar
CRITICAL ENVIRONMENTS
E-142
All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimeter.
Product Options
FFU Series modules are supplied with a motor/blower assembly that is easily accessible and removable from the top of the unit (left-hand image). RSR lter modules are also available with a roomside-removable motor/blower option (right-hand image). Standard Construction REM Option
LED Filter Indicator Option (FL)* LED indicator light turns from green to yellow when the pressure drop over the lter exceeds the specied limit. Yellow light indicates that filter is still functional but should be replaced as soon as possible. LED operation is unaffected by room pressure changes.
CRITICAL ENVIRONMENTS
LED Motor Indicator Option (ML)* LED indicator turns from green to red if the motor stops running. Motor BAS Signal Option (MBAS) Motor signal is wired directly to the building automation system to provide a signal for the motor status. The signal originates from a differential pressure switch that switches when the motor/blower is moving air. General LED, are visible from occupied area, so there is no need to open the unit in order to determine the lter or motor status. LED kit requires 24 VAC power supply, which is to be provided by others. (PSC motor units). LED kit is available factory installed or shipped loose for eld installation. Factory installed LED kit comes with factory pre-calibrated switch. Switches can be eld adjusted if required. Max available pressure setting is 1.0 in. w.g. Field installed kit may comes with switch that requires eld calibration to suit specic job conditions instructions are included in Installation Manual. Note: * Not available for FFU-HC.
All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimeter.
E-143
CRITICAL ENVIRONMENTS
E-144
All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimeter.
Operating Conditions: Storage Conditions: Processor: Inputs: Outputs: Connections: Dimensions: Shipping Weight:
24 VAC 10% @ 50/60Hz (2VA) 32 F to 122 F [0 C to 50 C] 0% 95% R.H. non-condensing -22 F to 122 F [-30 C to 50 C] 0% 95% R.H. non-condensing 8-bit standard ash microcontroller 2 Analog (Dial input and BAS input) 3 Digital (GO signal to ECM, Vspd PWM signal @ 80.0 Hz, Green Status LED) in. Spade Terminals Recommend 18-22AWG copper wire 2.5 in. by 3.8 in. [64 mm by 96 mm] (includes mounting plate) 0.100 lbs [46 grams]
All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimeter.
E-145
CRITICAL ENVIRONMENTS
Specications Power:
CRITICAL ENVIRONMENTS
Display Mode Spd Manual Speed Adjust Mode rPn Shows current RPM of ECM motor #1 bAS BAS Mode Voltage Signal
Specications Power:
Operating Conditions: Storage Conditions: Processor: Inputs: Outputs: Connections: Dimensions: Shipping Weight:
24 VAC 10% @ 50/60Hz (2VA) 32 F to 122 F [0 C to 50 C] 0% 95% R.H. non-condensing -22 F to 122 F [-30 C to 50 C] 0% 95% R.H. non-condensing 8-bit enhanced ash microcontroller 1 Analog and 3 digital inputs 2 Digital (GO signal to ECM and Vspd PWM signal @ 80.0 Hz) in. Spade Terminals Recommend 18-22AWG copper wire 2.8 in. by 3.8 in. [71 mm by 96 mm] (includes mounting plate) 0.220 lbs, 100 grams
E-146
All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimeter.
Product Options
Wall Mounted Speed Control Kit Option - WK
The Wall Mounted Speed Control Kit is provided for customer convenience when air ow adjustment is required from the occupied zone without the use of any tools. When WK is provided there is no need to access the FFU unit directly. The WK kit can be easily installed in the eld by a qualied electrician instructions are included in the installation manual. The WK kit will be provided in 3 different styles to match motor selection: PSC Wall Mounted Control
WK kit for PSC Motor is high voltage and, as such, requires field supplied conduit and junction box. It is supplied loose for field installation in place of a speed controller usually located on the FFU unit. As opposed to standard speed controller, it is easily accessible and comes with a knob that can be adjusted without the use of a screw driver.
WK kit for ECM motor and Price Deluxe Speed Controller uses 24 VAC and comes supplied with approximately 2 ft of cable connected to the speed controller, to be field installed in a field supplied junction box. This WK kit also comes with a 2 ft cable with connector to attach to the ECM motor, and must be eld wired by a qualified electrician. In total, 8 wires should be run in the conduit; 6 for motor control, and 2 for 24 VAC. The WK kit is supplied loose in place of a speed controller usually mounted on the FFU unit. This option will also display motor RPM, giving the user an indication of how the FFU is responding to control.
All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimeter.
E-147
CRITICAL ENVIRONMENTS
WK kit for ECM motor uses 24 VAC and comes supplied with approximately 1 ft of cable soldered to the controller and to the wall-mount for eld installation in a eld supplied junction box. The wall-mounted potentiometer is supplied loose in addition to a standard ECM speed controller mounted on the FFU unit. This potentiometer has to be wired to the speed controller by matching the coordinated wire colors. As opposed to a standard speed controller, the WK kit is easily accessible and can be adjusted by a user without a screw driver.
CRITICAL ENVIRONMENTS
E-202
All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimeter.
All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimeter.
E-203
CRITICAL ENVIRONMENTS