Beruflich Dokumente
Kultur Dokumente
The vendor makes no representations or warranties with respec t to the contents here and s pecially disclaims any implied warranties of merchantability or fitness for any purpose. Further the vendor reserves the right to revise this publication and to make c hanges to the c ontents here without obligation to notify any party beforehand. D uplication of this publication, in part or in whole, is not allowed without first obtaining the vendors approval in writing.
The content of this users manual is subject to be c hanged without notice and we will not be res ponsible for any mis takes found in this users manual. All the brand and produc t names are trademarks of their respec tive companies .
K8M800 Micro A M2
1.2
PACKAGE CHECKLIST
FDD Cable X 1 HDD Cable X 1 Use rs Manual X 1 Fully Se tup Drive r C D X 1 Rear I/O Panel for ATX Case X 1 Se rial ATA Cable X 1 (optional) USB 2.0 Cable X1 (optional) S/PDIF Cable X 1 (optional) Se rial ATA Powe r Switch Cable X 1 (optional)
Motherboard Manual
1.3
CPU FSB Chipset
Super I/O
itor sed legacy H/W Mon Provides the most commonly u Super I/O functionality . Low Pin Coun t In terface DIMM Slots x 2 Fan Speed Controller ITE's "Smart Guardian" function Dual Channel Mode DDR2 memory modu le Supports DDR2 400 / 533 / 667 Registered DIMM and E CC DIMM is not supported Max Shared Video Memory is 64MB
Main Memory
Graphics
IDE
~4, Ultra DMA 33 / 66 / 100 / 133 Bu s Master supports PIO Mode 0 Mode
SATA
Integrated Serial ATA Con troller Data tran sfer rates up to 1.5 Gb/s. Realtek RTL8201CL ALC655/ALC658 AGP slot PCI slot Floppy connector IDE Connector SATA Conn ector Fron t Panel Connector Fron t Audio Conn ector CD-in Connector S/PDIF ou t connector CPU Fan header System Fan header CMOS clear header USB conn ector x1 x2 x1 x2 x2 x1 x1 x1 x1 x1 x1 x1 x2
10 / 100 Mb/s Auto-Negotiation 5.1 ch annels audio out Supports AGP expan sion cards Supports PCI expan sion cards Each connector supports 2 Floppy drives Each connector supports 2 IDE device Each connector supports 1 SATA devices Supports fron t panel facilities Supports fron t panel audio fun ction Supports CD audio-in function Supports digital audio out fun ction CPU Fan power supply (with Smart Fan function) System Fan Power supply Restore CMOS data to factory default Each connector supports 2 fron t panel USB ports
K8M800 Micro A M2
SPEC Power Conn ector (20pin) Power Conn ector (4pin) PS/2 Keyboard PS/2 Mouse Serial Port ter Port Back Panel Prin I/O VGA port LAN port USB Port Audio Jack Board Size 197 x 243 (mm) Special Features RAID 0 / 1 support Biostar Reserves the righ t to add or remove support for any OS With or without notice. x1 x1 x1 x1 x1 x1 x1 x1 x4 x3 Connects to Power supply Connects to Power supply Connects to PS/2 Keyboard Connects to PS/2 Mou se Connects to variou s types of device Connects to variou s types of device Connects to D-SUB Screen Connects to RJ-45 eth ernet cable Connects to USB devices Provide Audio-In/Out and microphone connection Micro ATX Size Board
1.4
Motherboard Manual
1.5
JKBMS1
DIMMA1
DIMMB1
JUSB1 JA TXPWR2
IDE1
JUSBLAN1
JAUDIO1
K8M800
BAT1
JCMOS1
AGP1
BIOS
PCI1
VT8237R+
JSATA2
Codec
PCI2
JSAT A1
JAUDIO2
JUSB2
JUSB3
JP ANEL1
IDE2
JCFAN1
F DD1
JCOM1
JATXPWR1
Socket
JPRNT1
JVGA1
A M2
K8M800 Micro A M2
CHAPTER 2: HARDWARE INSTALLATION 2.1 INST ALLING CENT RAL PROCESSING UNIT (CPU)
Step 2: Pull the lever toward direction A from the socket and then raise the lever up to a 90-degree angle.
Step 3: Look for the white triangle on socket, and the gold triangle on CPU should point towards this white triangle. The CPU will fit only in the correct orientation.
Motherboard Manual Step 4: Hold the CPU down firmly, and then close the lever toward direct B to complete the installation.
Step 5: Put the CPU Fan on the CPU and buckle it. Connect the CPU FAN power cable to the JCFAN1. This completes the installation.
K8M800 Micro A M2
2.2
FAN HEADERS
These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufacturer. Connect the fan cable to the connector while matching the black wire to pin#1.
JCFAN1
1 4
Pin 1 2 3 4
Assignment Ground +12V FAN RPM rate sense Smart Fan Control
Pin 1 2 3
JSFAN1
1 3
Note:
The JCFAN1 and JSFAN1 s upport 4-pin and 3-pin head connec tors. When c onnecti ng with wires onto c onnectors, please note that the red wire is the positi ve and s houl d be connected to pi n#2, and the bl ac k wire is Ground and s hould be c onnected to GND.
Motherboard Manual
2.3
A. DDR2 module
DIMMA1 DIMMB1
1.
Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM matches the break on the Slot.
2.
Insert the DIMM vertically and firmly into the slot until the retaining chip snap back in place and the DIMM is properly seated.
B. Memory Capacity
DIMM Socket Location DIMMA1 DIMMB1 DDR Module 256MB/512MB/1GB *1 256MB/512MB/1GB *1 Total Memory Size Max memory 2GB.
K8M800 Micro A M2
(O means memory installed, X means memory not installed.) The DRAM bus width of the memory module must be the same (x8 or x16)
Motherboard Manual
2.4
40
39
IDE1
IDE2
10
K8M800 Micro A M2
PCI1
PCI2
AGP1
11
Motherboard Manual
Pin opened
Pin closed
Pin1-2 closed
3.2
SLP 9 1
Pin 1 2 3 4 5 6 7 8
Assignment +5V N/A N/A Speaker HDD LED (+) HDD LED (-) Ground Reset control
Pin 9 10 11 12 13 14 15 16
Assignment Sleep control Ground N/A Power LED (+) Power LED (+) Power LED (-) Power button Ground
12
K8M800 Micro A M2
JATXPWR1
10 20
11
JATXPWR2
3 4 2 1
Pin 1 2 3 4
13
Motherboard Manual
JUSB2 JUSB3
2 1 10 9
10 11
13
12 13 14
Assignment Mic in/center Ground Mic power/Bass Audio power Right line out/ Speaker out Right Right line out/ Speaker out Right Reserved Key Left line out/ Speaker out Left Left line out/ Speaker out Left Right line in/ Rear speaker Right Right line in/ Rear speaker Right Left line in/ Rear speaker Left Left line in/ Rear speaker Left
14
K8M800 Micro A M2
Pin 1 2 3 4
1 3
1 3
6.
15
Motherboard Manual
Pin 1
JSATA1 JSATA2
2 3 4
5 6 7
Pin 1 2 3
16
K8M800 Micro A M2
4.2
RAID ARRAYS
RAID supports the following types of RAID arrays: RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for many applications. RAID 1: RAID 1 defines techniques for mirroring data.
4.3
RAID 0:
The controller stripes data across multiple drives in a RAID 0 array system. It breaks up a large file into smaller blocks and performs disk reads and writes across multiple drives in parallel. The size of each block is determined by the stripe size parameter, which you set during the creation of the RAID set based on the system environment. This technique reduces overall disk access time and offers high bandwidth.
17
Motherboard Manual
RAID 1:
Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1 array system. The mirrored (backup) copy of the data can reside on the same disk or on a second redundant drive in the array. RAID 1 provides a hot-standby copy of data if the active volume or drive is corrupted or becomes unavailable because of a hardware failure. RAID techniques can be applied for high-availability solutions, or as a form of automatic backup that eliminates tedious manual backups to more expensive and less reliable media.
18
K8M800 Micro A M2
The setup guide will auto detect your motherboard and operating system.
Note:
If this window didnt show up after you ins ert the Driver CD, please use file brows er to locate and execute the file SETUP.EXE under your optical drive.
A. Driver Installation
To install the driver, please click on the Driver icon. The setup guide will list the compatible driver for your motherboard and operating system. Click on each device driver to launch the installation program.
B. Software Installation
To install the software, please click on the Software icon. The setup guide will list the software available for your system, click on each software title to launch the installation program.
C. Manual
Aside from the paperback manual, we also provide manual in the Driver CD. Click on the Manual icon to browse for available manual.
Note:
You will need Acrobat R eader to open the manual file. Pleas e download the latest version of Acrobat Reader software from http://www.adobe.com/products/acrobat/readstep 2.html
19
Motherboard Manual
5.2
Beep Sound One long beep followed by two short beeps High-low siren sound
One Short beep when system boot-up No error found during POST Long beeps every other second No DRAM detected or install
5.3
A. BIOS Update
In this Case, please follow the procedure below to restore the BIOS: 1. Make a bootable floppy disk. 2. Download the Flash Utility AWDFLASH.exe from the Biostar website: www.biostar.com.tw 3. Confirm motherboard model and download the respectively BIOS from Biostar website. 4. Copy AWDFLASH.exe and respectively BIOS into floppy disk. 5. Insert the bootable disk into floppy drive and press Enter. 6. System will boot-up to DOS prompt. 7. Type Awdflash xxxx.bf/sn/py/r in DOS prompt. (xxxx means BIOS name.) 8. System will update BIOS automatically and restart. 9. The BIOS has been recovered and will work properly.
20
K8M800 Micro A M2
B. CPU Overheated
If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated. When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the system may not power on again. In this case, please double check: 1. The CPU cooler surface is placed evenly with the CPU surface. 2. CPU fan is rotated normally. 3. CPU fan speed is fulfilling with the CPU speed. After confirmed, please follow steps below to relief the CPU protection function. 1. Remove the power cord from power supply for seconds. 2. Wait for seconds. 3. Plug in the power cord and boot up the system. Or you can: 1. Clear the CMOS data. (See Close CMOS Header: JCMOS1 section) 2. Wait for seconds. 3. Power on the system again.
21
Motherboard Manual
5.4
1.
TROUBLESHOOT ING
Probable Solution 1. Make sure power cable is No power to the system at all securely plugged in. Power light dont illuminate, f an inside power supply does not turn 2. Replace cable. on. 3. Contact technical support. 2. Indicator light on key board does not turn on. System inoperativ e. Keyboard lights Using even pressure on both ends of are on, power indicator lights are lit, the DIMM, press down firmly until the and hard driv e is spinning. module snaps into place. System does not boot from hard disk 1. driv e, can be booted f rom optical driv e. Check cable running from disk to disk controller board. Make sure both ends are securely plugged in; check the driv e type in the standard CMOS setup. 2. Backing up the hard drive is extremely important. All hard disks are capable of breaking down at any time. 1. Back up data and applications System only boots f rom optical driv e. f iles. Hard disk can be read and applications can be used but booting from hard disk 2. Ref ormat the hard driv e. is impossible. Re-install applications and data using backup disks. Screen message says Invalid Rev iew systems equipment. Make sure Conf iguration or CMOS Failure. correct inf ormation is in setup. Cannot boot system after installing 1. Set master/slave jumpers second hard driv e. correctly. 2. Run SETUP program and select correct driv e types. Call the drive manuf acturers f or compatibility with other drives.
22
K8M800 Micro A M2
CHAPTER 6: WARPSPEEDER
6.1
[WarpSpeeder], a new powerful control utility, features three user-friendly functions including Overclock Manager, Overvoltage Manager, and Hardware Monitor. With the Overclock Manager, users can easily adjust the frequency they prefer or they can get the best CPU performance with just one click. The Overvoltage Manager, on the other hand, helps to power up CPU core voltage and Memory voltage. The cool Hardware Monitor smartly indicates the temperatures, voltage and CPU fan speed as well as the chipset information. Also, in the About panel, you can get detail descriptions about BIOS model and chipsets. In addition, the frequency status of CPU, memory, AGP and PCI along with the CPU speed are synchronically shown on our main panel. Moreover, to protect users' computer systems if the setting is not appropriate when testing and results in system fail or hang, [WarpSpeeder] technology assures the system stability by automatically rebooting the computer and then restart to a speed that is either the original system speed or a suitable one.
6.2
SYST EM REQUIREMENT
OS Support: Windows 98 SE, Windows Me, Windows 2000, Windows XP DirectX: DirectX 8.1 or above. (The Windows XP operating system includes DirectX 8.1. If you use Windows XP, you do not need to install DirectX 8.1.)
23
Motherboard Manual
6.3
1. Execute the setup execution file, and then the following dialog will pop up. Please click Next button and follow the default procedure to install.
2. When you see the following dialog in setup procedure, it means setup is completed. If the Launch the WarpSpeeder Tray Utility checkbox is checked, the Tray Icon utility and [WarpSpeeder] utility will be automatically and immediately launched after you click Finish button.
Usage :
The following figures are just only for reference, the screen printed in this user manual will change according to your motherboard on hand.
24
K8M800 Micro A M2
6.4
WARPSPEEDER
Whenever the Tray Icon utility is launched, it will display a little tray icon on the right side of Windows Taskbar.
1. Tray Icon:
This utility is responsible for conveniently invoking [WarpSpeeder] Utility. You can use the mouse by clicking the left button in order to invoke [WarpSpeeder] directly from the little tray icon or you can right-click the little tray icon to pop up a popup menu as following figure. The Launch Utility item in the popup menu has the same function as mouse left-click on tray icon and Exit item will close Tray Icon utility if selected.
25
Motherboard Manual
2. Main Panel
If you click the tray icon, [WarpSpeeder] utility will be invoked. Please refer to the following figure; the utilitys first window you will see is Main Panel.
26
K8M800 Micro A M2
3. Voltage Panel
Click the Voltage button in Main Panel, the button will be highlighted and the Voltage Panel will slide out to up as the following figure. In this panel, you can decide to increase CPU core voltage and Memory voltage or not. The default setting is No. If you want to get the best performance of overclocking, we recommend you click the option Yes.
27
Motherboard Manual
4. Overclock Panel
Click the Overclock button in Main Panel, the button will be highlighted and the Overclock Panel will slide out to left as the following figure.
b.
Recovery Dialog button: Pop up the following dialog. Let user select a restoring way if system need to do a fail-safe reboot.
28
c.
d.
K8M800 Micro A M2 Auto-overclock button: User can click this button and [WarpSpeeder] will set the best and stable performance and frequency automatically. [WarpSpeeder] utility will execute a series of testing until system fail. Then system will do fail-safe reboot by using Watchdog function. After reboot, the [WarpSpeeder] utility will restore to the hardware default setting or load the verified best and stable frequency according to the Recovery Dialogs setting. Verify button: User can click this button and [WarpSpeeder] will proceed a testing for current frequency. If the testing is ok, then the current frequency will be saved into system registry. If the testing fail, system will do a fail-safe rebooting. After reboot, the [WarpSpeeder] utility will restore to the hardware default setting or load the verified best and stable frequency according to the Recovery Dialogs setting.
Note: Because the testing programs, invoked in Auto-overclock and Verify, include DirectDraw, Direct3D and DirectShow tests, the DirectX 8.1 or newer runtime library is required. And please make sure y our display cards color depth is High color (16 bit) or True color( 24/32 bit ) that is required f or Direct3D rendering.
29
Motherboard Manual
6. About Panel
Click the about button in Main Panel, the button will be highlighted and the About Panel will slide out to up as the following figure. In this panel, you can get model name and detail information in hints of all the chipset that are related to overclocking. You can also get the mainboards BIOS model and the Version number of [WarpSpeeder] utility.
Note :
Because the overclock, overvoltage, and hardware monitor features are controlled by several separate chipset, [WarpSpeeder] divide these features to separate panels. If one chipset is not on board, the correlative button in Main panel will be disabled, but will not interfere other panels functions. This property can make [WarpSpeeder] utility more robust.
30
K8M800 Micro A M2
31
Motherboard Manual
CPU
FSB
Chipsatz
LAN
Auto-Negotiation
32
K8M800 Micro A M2
Spezifikationen Fron t-Audioanschlu ss CD-IN-An schlu ss S/PDIF- Ausgangsansch luss CPU-Lfter-Sockel System-Lfter-Sockel "CMOS lschen"-Sockel USB-An schlu ss x1 Unterst tzt die Fron ttafel-Audioan schlu ssfunktion x1 Unterst tzt die CD Audio-In-Funktion x1 Unterst tzt die digitale Audioausgabefunktion x1 CPU-Lfterstromversorgungsansch luss (mit Smart Fan-Fun ktion)
x1 System-Lfter-Stromversorgungsan schlu ss x1 x2 Jeder Ansch luss un tersttzt 2 Fron ttaf el-USB-Ansch lsse
Stromansch luss (20-polig) Stromansch luss (4-polig) PS/2-Tastatur PS/2-Mau s Druckeran schlu ss schlu ss Rckseiten-E VGA-An /A Serieller An schlu ss LAN-An schlu ss USB-An schlu ss Audioan schlu ss Platinengre . Sonderfun kti onen OS-Un terstt zung 197 mm (B) X 243 mm (L)
x1 x1 x1 x1 x1 x1 x1 x1 x4 x3
Unterst tzt RAID 0 / 1 , ohne An kndigung die Biostar behlt sich das Rech t vor Windows 2000 / XP Unterst tzung fr ein Betriebssystem hin zuzufgen oder zu entfernen .
33
Motherboard Manual
FRANCE
SPEC Socket AM2 Processeu rs AMD Sempron Prend en charge Hyper Tran sport ju squ' une bande passan te de 800 MHz K8M800 VT8237R+ ITE IT8705 Super E/S Fourn it la fon ctionnalit de Super E/S patrimoniales la plus u tilise. Interface faible compte de broches Fentes DDR2 DIMM x 2 Mmoire prin cipale Initiatives de contrle environnemen tales, Moniteur de matriel Contrleur de vitesse de ven tilateur Fonction "Gardien intelligen t" de l'ITE Module de mmoire DDR2 mode double voie
UC
Bus f rontal
Chipset
Chaque DIMM prend en charge des DDR2 Prend en charge la DDR2 400 / 533 / 667 de 256/512 Mo et 1Go Capacit mmoire maximale de 2 Go Les DIMM registres et DIMM san s code correcteu rs d'erreurs ne son t pas prises en charge Mmoire vido partage maximale de 64 Mo
, Mode prin cipale de Bu s Ultra DMA 33 / 66 / Prend en charge le mode PIO 0~4 100 / 133
SATA
10 / 100 Mb/s ngociation au tomatique AC97 Version 2 .3 Sortie S/PDIF x1 x2 x1 Chaque connector prend en ch arge 2 lecteu rs de disqu ettes Chaque connecteur prend en ch arge 2 priphriqu es IDE Chaque connecteur prend en ch arge 1 priphriqu e SATA
Connecteu r IDE
x2
Connecteu r SATA
x2
34
K8M800 Micro A M2
SPEC Connecteu r du panneau avan t x1 Prend en charge les qu ipements du panneau avan t
Connecteu r Audio du panneau avantx1 x1 Prend en charge la fon ction audio du panneau avan t Connecteu r d'entre CD Connecteu r de sortie S/PDIF Embase de ven tilateur UC Embase de ven tilateur systme Embase d'effacemen t CMOS Connecteu r USB Connecteu r d'alimen tation (20 broch es) Connecteu r d'alimen tation (4 broch es) Clavier PS/2 Souris PS/2 Port srie E/S du panneau arrire Port d'imprimante Port VG A Port LAN Port USB Fiche audio Dimen sions de la carte Fonctionnali ts spciales Support SE Windows 2000 / XP Biostar se rserve le droit d'ajouter ou de supprimer le support de SE avec ou san s pravis. Prise en charge RAID 0 / 1 197 mm (l) X 243 mm (H) x1 x1 x1 x1 x1 x1 x4 x3 x1 x1 x1 x1 x1 x1 x2 x1 Chaque connecteur prend en ch arge 2 ports USB de panneau avan t Prend en charge la fon ction d'entre audio de CD Prend en charge la fon ction de sortie audio numriqu e Alimen tation lectrique du ven tilateur UC (avec fonction de ventilateu r in telligent) Alimen tation lectrique du ven tilateur systme
35
Motherboard Manual
IT ALIAN
SPECIFICA Socket AM2 Processori AMD Sempro n Supporto di Hy per Transport fino a800 MHz di lar ghezza di ba nda K8M800 VT8237R+ ITE IT8705 Super I/O Funzioni di co ntrollo dellambiente:
CPU
FSB
Chipset
Fornisce le funzio nalit legacy Super Monitoraggio hardware I/O usate pi comunemente. Interfaccia LPC (L ow Pin Count) Alloggi DIMM DDR 2 x 2 Controller velocit ventolina Funzione "Smart Guardi an" di I TE Modulo di memoria DDR2 a canale doppio Supporto di DDR2 400 / 533 / 667 DIMM registrati e DIMM ECC sono supportati La memoria vi deo co ndivisa massima di 64MB
Memoria principale
Ciascun DIMM supporta DDR 2 256/512MB e 1GB Capacit massima della memoria 2GB
Grafica
IDE
Modalit Bus Master Ultra DMA 33 / 66 / 100 / 133 Controller Serial ATA inte grato
SATA
Velocit di trasferimento dei dati fi no Compatibile specifiche SATA Versione 1.0. a 1.5 Gb/s.
Connettori Connettore flo ppy su scheda Connettore IDE Connettore SATA Connettore pa nnello fro ntale Connettore audio frontale
Ciascun connettore supporta 2 unit Floppy Ciascun connettore supporta 2 unit IDE Ciascun connettore supporta 1 unit SATA Supporta i servizi del pa nnell o fr ontale Supporta la funzione audi o pannello frontale
36
K8M800 Micro A M2
SPECIFICA Connettore CD-in Connettore output SPDIF Collettore ventolina CPU Collettore ventolina sistema Collettore cancellazione CMOS Connettore USB Connettore alimentazione (20 pin) Connettore alimentazione (4 pi n) Tastiera PS/2 Mouse PS/2 Porta seriale I/O pannello posteriore Porta stampante Porta VGA Porta LAN Porta USB Connettore audio Dimension i scheda 197 mm (larghezza) x 243 mm (altezza) x1 x1 x1 x1 x1 x1 x4 x3 x1 x1 x1 x1 x1 x1 x2 x1 Ciascun connettore supporta 2 porte USB pannello frontale Supporta la funzione i nput audio C D Supporta la funzione doutput a udio digitale Alimentazione v entolina C PU (con funzio ne Smart Fan) Alimentazione ve ntolina di sistema
Caratterist Supporto RAID 0 / 1 iche speciali Sistemi operativi supportati Windows 2000 / XP Biostar si riserva il diritto di aggiungere o rimuovere il supporto di qualsiasi sistema operativo se nza pre avviso.
37
Motherboard Manual
SPANISH
Especificacin Conector AM2 Procesadores AMD Sempron Admite HyperTran sport con un an cho de banda de hasta800 MHz
CPU
FSB
Conjunto de K8M800 chips VT8237R+ ITE IT8705 Sper E/S Iniciativas de control de entorno,
Le of rece las fun cion alidades heredadas de Monitor hardware uso ms comn Sper E/S. Interfaz de cu enta Low Pin Ranuras DIMM DDR2 x 2 Controlador de velocidad de ventilador Funcin "Guardia in teligente" de ITE Mdulo de memoria DDR2 de canal Doble
Cada DIMM admite DDR de 256/512 MB y Admite DDR2 de 400 / 533 / 667 1GB Capacidad mxima de memoria de 2GB No admite DIMM registrados o DIMM n o compatibles con ECC Memoria mxima de vdeo compartida de 64MB
Grficos
IDE
, Modo bu s maestro Ultra DMA 33 / 66 / 100 Soporte los Modos PIO 0~4 / 133
Controlador ATA Serie In tegrado Tasas de tran sferen cia de h asta 1 .5 Gb/s. Realtek RTL8201CL ALC655/ALC658 Ranura AGP Ranura PCI X1 X2 X1 X2 X2 X1 X1
Compatible con la versin SATA 1 .0. Negociacin de 10 / 100 Mb/s Salida de son ido de 6 canales
Conectores Conector disco flexible en placa Conector IDE Conector SATA Conector de panel fron tal Conector de sonido fron tal
Cada conector soporta 2 unidades de disco flexible Cada conector soporta 2 dispositivos IDE Cada conector soporta 1 dispositivos SATA Soporta instalaciones en el panel fron tal Soporta fun cion es de son ido en el panel fron tal
38
K8M800 Micro A M2
Especificacin Conector de en trada de CD Conector de salida S/PDIF Cabecera de ven tilador de CPU X1 X1 X1 Soporta fun cin de entrada de son ido de CD Soporta fun cin de salida de sonido digital Fuente de alimentacin de ven tilador de CPU (con funcin Smart Fan ) Cabecera de ven tilador de sistema X1 Cabecera de borrado de CMOS Conector USB Conector de alimen tacin (20 patillas) Conector de alimen tacin (4 patillas) Teclado PS/2 Ratn PS/2 Puerto serie Panel trasero de E/S Puerto de impresora Puerto VG A Puerto de red local Puerto USB Conector de sonido Tamao de la placa Funciones especiales Soporte de sistema operativo Windows 2000 / XP 197 mm. (A) X 243 Mm. (H) X1 X1 X1 X1 X1 X1 X4 X3 X1 X1 X2 X1 Cada conector soporta 2 puertos USB fron tales Fuente de alimentacin de ven tilador de sistema
Admite RAID 0 / 1
Biostar se reserva el derecho de a adir o retirar el soporte de cualquier SO con o sin aviso previo.
39
Motherboard Manual
PORT UGUESE
ESPECIFICA ES Socket AM2 Processadores AMD Sempron Suporta a tecnologia HyperT ransport com uma largura de banda at800 MHz K8M800 VT8237R+ ITE IT8705 Especif ica o Super I/O Proporciona as funcionalidades mais utilizadas em termos da especificao Super I/O. Interface LPC (Low Pin Count). Ranhuras DIMM DDR2 x 2 Memria prin cipal Cada mdulo DIMM suporta uma memria DDR2 de 256/512 MB & 1 G B Capacidade mxima de memria: 2 GB Placa grfica Integrada no ch ipset K8M800 Controlador IDE in tegrado IDE ~4 , Modo Bus master Ultra DMA 33 / 66 / 100 Suporta o modo PIO 0 / 133 Controlador Serial ATA in tegrado SATA .0. Velocidades de tran smisso de dados at Compatibilidade com a especificao SATA verso 1 1.5 Gb/s. LAN Codec de som Ranhuras Realtek RTL8201CL ALC655/ALC658 Ranhura AGP Ranhura PCI Conectores Conector da unidade de disqu etes na placa Conector IDE Conector SATA Conector do painel f rontal x1 x2 x1 x2 x2 x1 Cada conector suporta 2 unidades de disquetes Cada conector suporta 2 dispositivos IDE Cada conector suporta 1 dispositivo SATA Para suporte de vrias funes no painel fron tal Auto n egociao de 10 / 100 Mb/s Sada de udio de 6 can ais Iniciativas para controlo do ambien te Monitorizao do hardware Controlador da velocidade da ventoinha Funo "Smart Guardian" da ITE Mdulo de memria DDR2 de canal duplo Suporta mdulos DDR2 400 / 533 / 667 Os mdu los DIMM registados e os DIMM E CC so suportados Memria de vdeo mxima partilhada: 64 MB
CPU
FSB
Chipset
40
K8M800 Micro A M2
ESPECIFICA ES Conector de udio fron tal Conector para en trada de CDs Conector de sada S/PDIF Conector da ven toinha da CPU Conector da ven toinha do sistema Conector para limpeza do CMOS Conector USB Conector de alimen tao (20 pinos) Conector de alimen tao (4 pinos) Teclado PS/2 Rato PS/2 Entradas/S adas no painel traseiro Porta srie Porta para impressora Porta VG A Porta LAN Porta USB Tomada de udio Tamanho da placa Caractersti cas especiais Sistemas operativos suportados Windows 2000 / XP A Biostar reserva-se o direito de adicionar ou remover suporte para qualquer sistema operativo com ou sem aviso prvio. Suporta as funes RAID 0 / 1 197 mm (L) X 243 mm (A) x1 x1 x1 x1 x1 x1 x4 x3 x1 x1 x1 x1 x1 Suporta a fun o de udio no painel f ron tal Suporta a en trada de udio a partir de CDs Suporta a sada de udio digital Alimen tao da ventoinha da CPU (com a fun o Smart Fan)
x11 Alimen tao da ven toinha do sistema x1 x2 x1 Cada conector suporta 2 portas USB n o painel fron tal
41
Motherboard Manual
POLISH
SPEC Socket AM2 AMD Sempron Procesory Obs uga HyperT ran sport o szerokoci pasma do800 MHz K8M800 VT8237R+ Gniazda DDR2 DIMM x 2 Pami gwna Ka de gniazdo DIMM obs uguje modu y 256/512MB oraz 1GB DDR2 Maks. wielko pamici 2G B ITE IT8705 Super I/O Modu pamici DDR2 z trybem podwjnego kanau Obs uga DDR2 400 / 533 / 667 Brak obsugi Registered DIMM oraz ECC DIMM Funkcj e kon troli warun kw pracy ,
Procesor
FSB
Chipset
Zapewnia najbardziej powszechn e funkcje Monitor H/W Super I/O. Interfej s Low Pin Coun t Kon troler prdkoci wen tylatora Funkcj a ITE "Smart Guardian" Maks. wielko wspdzielon ej pamici video wynosi 64MB
Grafika
IDE
Zin tegrowany kon troler Serial ATA Transfer danych do 1 .5 Gb/s. Realtek RTL8201CL ALC655/ALC658 Gniazdo AGP Gniazdo PCI Zcze napdu dyskietek x1 x2 x1 x2 x2 x1 x1 x1
Zgodno ze specyf ikacj SATA w wersji 1 .0 . 10 / 100 Mb/s z au tomatyczn negocj acj szybkoci 6 kanaowe wyj cie audio
Ka de z cze obs uguje 2 napdy dyskietek Ka de z cze obs uguje 2 u rzdzenia IDE Ka de z cze obs uguje 1 u rzdzenie SATA Obs uga elemen tw panela przedniego Obs uga funkcj i audio na panelu przednim Obs uga funkcj i wej cia audio CD
wbudowane Zcze IDE Zcze SATA Zcze panela przedn iego Przednie z cze audio Zcze wej cia CD
42
K8M800 Micro A M2
SPEC Zcze wyj cia S/PDIF Zcze gwkowe wen tylatora procesora Zcze gwkowe wen tylatora systemowego Zcze gwkowe kasowania CMOS Zcze USB Zcze zasilania (20 pinowe) Zcze zasilania (4 pinowe) Klawiatu ra PS/2 Mysz PS/2 Port szeregowy Back Panel Port drukarki I/O Port VG A Port LAN Port USB Gniazdo audio Wymiary pyty Funkcj e specjaln e Obsluga systemu operacyjne go Windows 2000 / XP 197 mm (S) X 243 mm (W) x1 x2 x1 x1 x1 x1 x1 x1 x1 x1 x4 x3 Ka de z cze obs uguje 2 porty USB na panelu przedn im x1 x1 x1 Obs uga funkcj i cyfrowego wyj cia audio Zasilanie wen tylatora procesora (z funkcj Smart Fan)
Biostar zastrzega sobie prawo dodawania lub odwoywania obsugi dowoln ego systemu operacyjnego bez powiadomien ia.
43
Motherboard Manual
RUSSIAN
. CPU ( AM2 ) FSB HyperTran sport 800M K8M800 AMD Sempron Hyper Tran sport CoolnQu iet
VT8237R+ DDR2 DIMM x 2 DIMM 256/512 & 1 DDR2 2 ITE IT8705 Super I/O Super I/O. K8 M800 DDR2 DDR2 400 / 533 / 667 DIMM and ECC DIMM , ITE "Smart Guardian " ( ) 64 "" Ultra DMA 33 / 66 / 100 / 133
IDE
SATA
2 2 1 SATA
IDE SATA
x2 x2 x1
44
K8M800 Micro A M2
. CD S/PDIF . CMOS USB- (20 ) (4 ) PS/2 PS/2 - VGA LAN USB- OS Biostar Windows 2000 / XP OS . RAID 0 / 1 197 () X 243 () x3 x1 x2 x1 x1 x1 x1 x1 x1 x1 x1 x4 2 USB- x1 x1 x1 x1 CD ( )
45
Motherboard Manual
ARABIC
AM2 Hyper T Cooln ransport Quiet AMD Sempron HyperT 800 ransport K8M800 VT8237R+
DDR2 DIMM2
DDR2 DIMM DDR2 DDR2 667 / 533 /400
1 256/512
DIMM ECC 2 : ITE""Smart Guardian 64 K8M800 IDE PIO Mode 0~4 Ultra DMA 33 / 66 / 100 / 133 Serial ATA 1.0 SATA . 1/. .5 100/10 / 6 Realtek RTL8201CL ALC655/ALC658 SATA IDE ITE IT8705 Super I/O . Super I/O Low Pin Count Interface
1 2
IDE SATA
AGP
1 2 2 1
46
K8M800 Micro A M2
1 1 1
CD-IN S/PDIF
) Smart Fan (
1 1
CMOS USB
USB
197 ) ( 243 X ) (
RAID 0 / 1 Biostar. Windows 2000 / XP
47
Motherboard Manual
JAPANESE
Socket AM2 AMD Sempron 800 MHz K8M800 VT8237R+ DDR2 DIMM x 2 DIMM 256/512 MB & 1GB DDR2 2GB ITE IT8705 Super I/O DDR2 DDR2 400 / 533 / 667 DIMME CC DIMM
CPU
FSB
K8M800 IDE
IDE
48
K8M800 Micro A M2
CD S/PDIF CPU CMOS USB (20 ) (4 ) PS/2 PS/2 I/O VGA LAN USB 197 mm () X 243 mm () RAID 0 / 1 BiostarOS x1 x1 x1 x1 x1 x1 x2 x1 x1 x1 x1 x1 x1 x1 x1 x4 x3 2 USB CD CPU()
OS Windows 2000 / XP
2006/07/26
49
APM Support
These AWARD BIOS supports Version 1.1&1.2 of the Advanced Power Management (APM) specification. Power management features are implemented via the System Management Interrupt (SMI). Sleep and Suspend power management modes are supported. Power to the hard disk drives and video monitors can be managed by this AWARD BIOS.
ACPI Support
Award ACPI BIOS support Version 1.0 of Advanced Configuration and Power interface specification (ACPI). It provides ASL code for power management and device configuration capabilities as defined in the ACPI specification, developed by Microsoft, Intel and Toshiba.
DRAM Support
DDR SDRAM (Double Data Rate Synchronous DRAM) are supported.
Supported CPUs
This AWARD BIOS supports the AMD CPU.
Using Setup
In general, you use the arrow keys to highlight items, press <Enter> to select, use the <PgUp> and <PgDn> keys to change entries, press <F1> for help and press <Esc> to quit. The following table provides more detail about how to navigate in the Setup program by using the keyboard.
Keystroke
Up arrow Down arrow Left arrow Right arrow Move Enter PgUp key PgDn key + Key - Key Esc key F1 key F5 key F7 key F10 key
Function
Move to previous item Move to next item Move to the item on the left (menu bar) Move to the item on the right (menu bar) Move to the item you desired Increase the numeric value or make changes Decrease the numeric value or make changes Increase the numeric value or make changes Decrease the numeric value or make changes Main Menu Quit and not save changes into CMOS Status Page Setup Menu and Option Page Setup Menu Exit Current page and return to Main Menu General help on Setup navigation keys Load previous values from CMOS Load the optimized defaults Save all the CMOS changes and exit
PnP/PCI Configurations
This submenu allows you to configure certain Plug and Play and PCI options.
PC Health Status
This submenu allows you to monitor the hardware of your system.
Upgrade BIOS
This submenu allows you to upgrade bios.
Item
Date
Options
mm : dd : yy
Description
Set the system date. Note that the Day automatically changes when you set the date. Set the clock. system internal
hh : mm : ss Options are in its sub menu. Options are in its sub menu.
Press <Enter> to enter the sub menu of detailed options Press <Enter> to enter the sub menu of detailed options. Press <Enter> to enter the sub menu of detailed options. Press <Enter> to enter the sub menu of detailed options. Select the type of floppy disk drive installed in your system.
IDE Secondary Master Options are in its sub menu. IDE Secondary Slave Options are in its sub menu. 360K, 5.25 in 1.2M, 5.25 in 720K, 3.5 in 1.44M, 3.5 in 2.88M, 3.5 in None Video EGA/VGA CGA 40 CGA 80 MONO
Drive A Drive B
Options
All Errors No Errors All, but Keyboard All, but Diskette All, but Disk/ Key
Description
Select the situation in which you want the BIOS to stop the POST process and notify you. Displays the amount of conventional memory detected during boot up.
Base Memory
N/A
Extended Memory
N/A
Total Memory
N/A