Beruflich Dokumente
Kultur Dokumente
NX 9.0
100126
Fixed for NX 9.0. GRIPBATCH from the UniProducts menu will prompt for an input string.
100259
In point to point, with a standard cycle active, GOHOME with no parameters no longer
causes an extra goto to be output between cycle off and gohome. Fixed NX 9.0 ip1.
100339
This bug has been verified fixed in the NX 9.0.x release of UGTODMIS by NTS. /JPL.
100501
This was fixed by adding a sleep statement into rc.mdc after grip batch is started up.
100556
There is a conflict between the UG command refile and the Ultrix mail handler command
refile. For NX 9.0 of UG, a caveat has been added to the release letter instructing users to
rename our "refile" to "ugrefile" . All platforms will change the refile command name to use
this new name on NX 9.0 ip1.
100562
Fixed NX 9.0 ip10 the avoid option in point to point now works correctly (no errors are
generated).
100715
100731
It is up to the analist to keep track of units. The solver (ansys, nastra , gfemfea) doesn't care
what units are used, it simply crunches numbers. Larry Cull StL NTS.
101001
101011
101039
Plot temp files are created in the / directory before they are sent to the system queue. A new
environment variable will be added to point to the desired temporary directory
101461
Fixed in NX 9.0.
101723
The system now generates a correct tool path when the tool is parallel to the part surface.
Fixed for NX 9.0.
101743
Development has instituted a logical, UGII$NODES, for NX 9.0 of UGII that is to be placed in
the SYSTARTUP_V5.COM file so that SYSMAN will only effect those nodes identifies by the
said logical.
102147
102603
The ACS NX 8.0 kit fails to install on a VAX/VMS system used as an ACS client. This
problem is resolved in UG NX 9.0.
103172
The fixes made to DXFTOUG were customized fixes for Cascade Corp. If the Graftech to
DXF translator becomes more widespread in its use, we will look into incorporating our fixes
into the production translator.
104231
The single gouge move in this fixed axis tool path has been fixed for NX 9.0.
105385
This problem is caused by a mismatch in the buffer parameters used by Woolongong and
HP-UX 8.07. There are two ways to correct this:
This problem appears to be caused by a 'long-line' bug in the X-Server. The bug causes the
X-Server to crash when drawing certain long lines so that all Unigraphics sessions are lost.
The bug is most likely to occur after choosing 'Free Rotation' from the Zoom/Pan/Regen
menu. During 'Free Rotation', Unigraphics some- times attempts to draw long lines (for the
rotation cursor) that can activate the X-Server bug. The problem affects both XWIMOD and
VWSMOD, but only on HP-CISC work- stations (HP 9000 Series 300 Workstations and HP
9000 Series 400 Workstations) running HP-UX v8.0, or earlier. HP has prepared a patch for
the bug (PHSS_1051), which may be applied to HP-UX v8.0. M. Bourguet 05-29-92.
106110
PR106110 has been closed. We had to create a SAMPLE profile in fmexec manually for
remote plotting via ugnet. In the future, the Unigraphics install on ULTRIX will create this
SAMPLE profile automatically. Sylia Zirlik NTS client services (714)952-5651.
106409
A workaround has been identified for this PR. A permanent fix will be add reused by
interleaf. To execute the workaround you will need to do the following:
Open X-term window: CD /IVIEW LS AT THIS POINT YOU WILL NEED TO REMOVE THE
BOOKMARKS FILE.. RM BOOKMARKS LS AT THIS POINT THE BOOKMARKS FILE WILL
NO LONGER EXIST.
TO ADD THE BOOKMARKS FILE BACK IN YOU WILL NEED TO DO THE FOLLOWING:
TOUCH BOOKMARKS This workaround will take care of the memory fault error until a
permanent solution is found.
107422
This problem has been verified fixed for the NX 9.0 release of UGTODMIS by Jerry Lewis of
NTS.
108858
This problem has been verified fixed for the NX 9.0 release of Simulation/Robotics by Jerry
Lewis of NTS, as long as system has at least the minimum amount of swap recommended.
109703
This problem was fixed in NX 9.0. The actual PR that this relates to is 106383.
110297
Fixed in NX 9.0.
110575
Email sent to client (Mr. Ratcliff's findings text)/jur 5/11 Fixed in V9/jur.
113028
In NX 8 of UG, The triangle symbol created by the system as a leader attachmen for GDT
symbols is canted ("tilted"), if a vertical line not passing through the WCS origin is used as
the BASE OF TRIANGLE. Problem is fixed in NX 9.0.
117594
117894
118333
The problem of the dimension being formatted incorrectly in AutoCAD has been fixed with
NX 9.0 of UGTODXF.
121995
121999
122014
122484
The documentation has been rewritten regarding: GRIPNC-DOCS-V9 pp 5-68 GSSMATANGL CUTANG.
127256
This PR has been fixed (in DM2240) for NX 9.0 ip1 of UGTODMIS.
128029
1106522
Siemens PLM believes that the problem you reported where the part fails to update during
feature playback will be resolved by code changes made to the upcoming release of our
software NX 9.0.
1316816
Siemens PLM believes that the problem you reported where Examine Geometry showed
that a Blend feature generated self-intersecting geometry, will be resolved by code changes
made to the upcoming release of our software NX 9.0. Edge Blend (171) can be now be
created without self-intersecting surfaces in NX 9.0. However, Edge Blend (171) must be
deleted and a new edge blend must be created in NX 9.0 to access the fixed code.
1362608
Siemens PLM believes that the problem you reported where a Blend feature failed update,
will be resolved by code changes made to the upcoming release of our software NX 9.0.
1389693
Siemens PLM believes that the problem you reported where feature update in NX 2.0.3
works, but fails in NX 2.0.4 and later on "Edge Blend(1357)" will be resolved by code
changes made to the upcoming release of our software NX 9.0 ip1.
1403517
The problem where Section view does not update after model edit. Modeler error received is
fixed in release NX 9.0 ip16.
1472323
Siemens PLM believes that the problem you reported where creating an edge blend
between 3.99999 - 4.00001 gave incorrect results whereas an edge blend of 3.999 or 4.001
gave the correct results, will be resolved by code changes made to the upcoming release of
our software NX 9.0.
1542419
Siemens PLM believes that the problem you reported where a Subtract Boolean failed with
"Thru face does not intersect path of the tool" when the bodies clearly intersect. will be
resolved by code changes made to the upcoming release of our software NX 9.0.
1545747
Siemens PLM believes that the problem you reported where the View Section toggle was not
persistent within the same session, will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1594424
Siemens PLM believes that the problem you reported where Mirror body was losing its G1
and G2 continuity, will be resolved by code changes made to the upcoming release of our
software NX 9.0. Note - This is fixed ONLY in the Adjacent Edges function. Please note that
the total number of points evaluated has doubled in order to guarantee
a) the result is independent of the order of selection, and
b) the mirror shows results consistent with the original.
1616813
Siemens PLM believes that the problem you reported where the NXOpen .NET and Java
API Reference Guides needed more information describing how to use the NXOpen >
Session > ExecuteGrip method will be resolved by documentation changes made to the
upcoming release of our software NX 9.0.
1624739
Testing in the current development environment of NX 9.0 shows that the problem described
in this PR regarding simultaneous access by two uses to a given assembly in NX and
Teamcenter no longer occurs. The problem was most likely fixed by project changes made
in early NX 9.0 development.
1664143
1677330
Siemens PLM believes that the problem you reported where partition works with one edge
but not another will be resolved by code changes made to the upcoming release of our
software NX Advanced Simulation Version 9.0.
1692650
1693362
Siemens PLM believes that the problem you reported where suppressing and then
unsuppressing a UDF feature caused the UDF configuration to change, will be resolved by
code changes made to the upcoming release of our software NX 9.0.
1713622
Siemens PLM believes that the problem you reported where an NX 4 part fails to update a
Draft feature in NX 6, will be resolved by code changes made to the upcoming release of our
software NX 9.0.
1720612
1727313
Siemens PLM believes that the problem you reported where a SolidWorks file did not import
as expected will be resolved by code changes made to the upcoming release of our software
NX 9.0.
1739577
Siemens PLM believes that the problem you reported where an inferred datum plane causes
a loss of associativity to the Bridge Transition will be resolved by code changes made to the
upcoming release of our software NX 9.0. To verify the fix, create a new Bridge Transition
feature in NX 9.0. The existing Bridge Transition feature needs to be updated (by
suppressing and then un-suppressing or running Feature Playback), and then the datum
plane will fail. The correction is to simply edit the failed datum plane, re-select the reference
face, and then try to move the base part which will update the datum planes associatively.
1740579
Siemens PLM believes that the problem you reported where you were unable to create a
Flange when Corner Relief is active, will be resolved by code changes made to the
upcoming release of our software NX 9.0. Note: It is recommended to re-create Mirror
Body(15) and Unite(17) features in released NX 9.0 or newer versions. This is because the
commands have been enhanced in NX 9.0 to take care of sheet metal characteristics during
the operation.
1745584
Siemens PLM believes that the problem you reported where spaces in part name was
causing the translation to fail, will be resolved by changes made to the upcoming release of
our software NX 9.0.
1745878
Siemens PLM believes that the problem you reported where Unable to use a specific Resize
Bend Radius will be resolved by code changes made to the upcoming release of our
software NX 9.0 with user creating Resize Bend Radius feature to obtain the fix.
1746129
Siemens PLM believes that the problem you reported where The Note dialog did not resize
to accommodate text, as it did in previous versions, will be resolved by code changes made
to the upcoming release of our software NX 9.0.
1746543
PRO: cannot call GRIP program from NXOpen .NET (C#) with Tag argument.
1749437
1756066
1759797
1783068
Siemens PLM believes that the problem you reported where opening a SolidWorks file in NX
did not display all of the solids will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1784350
Siemens PLM believes that the problem you reported where the Thread display in the
Breakout Section View in this part was not correct, will be resolved by code changes made
to the upcoming release of our software NX 9.0.
1784832
1791269
Siemens PLM believes that the problem you reported where performing an Extract Region of
Faces in NX on WXP64 caused NX shut down will be resolved by code changes made to the
upcoming release of our software NX 9.0.
1800305
Siemens PLM believes that the problem you reported where a radial trim plane lead to the
computation of an incorrect cut region and gouges of the part caused by the generated
toolpath will be resolved by code changes made to the upcoming release of our software NX
9.0.
1800376
Siemens PLM believes that the problem you reported where you were unable to create a
Flat Pattern after a Unite in NX Sheetmetal, will be resolved by code changes made to the
upcoming release of our software NX 9.0.
1802788
Siemens PLM believes that the problem you reported where Resize Neutral Factor doesn't
work correctly, will be resolved by code changes made to the upcoming release of our
software NX 9.0. Note: The fix restricts the selection of bend faces to a single body. The
Resize Neutral Factor features created prior to NX 9.0 on multiple bodies need to be
recreated in NX 9.0 to notice the fix.
1806318
Siemens PLM believes that the problem you reported where the Drill Optimize Shortest Path
Level option is set to Standard instead of Advanced will be resolved by code changes made
to the upcoming release of our software NX 9.0.
1811832
Siemens PLM believes that the problem you reported where loading an assembly in NX
Manager raised the message: "Failed to load part in swap_reference_set", will be resolved
by code changes made to the upcoming release of our software NX 9.0.
1812044
Siemens PLM believes that the problem you reported where an Internal Error was received
when creating a custom view will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1816748
1820352
Siemens PLM believes that the problem you reported where it was not possible to update a
renamed component in NX Manager in NX 6 ANT, will be resolved by code changes made
to the upcoming release of our software NX 9.0.
1820542
Siemens PLM believes that the problem you reported where Edit feature parameters,
highlighting is not going away, will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1821115
1821237
Siemens PLM believes that the problem you reported where the component name was not
shown in the ANT when an assembly was imported will be resolved by code changes made
Siemens PLM believes that the problem you reported where Component Groups in Session
that contained Zone or Proximity clauses would not save and restore properly via a PLMXML
bookmark, will be resolved by code changes made to the upcoming release of our software
NX 9.0.
1823775
Siemens PLM believes that the problem you reported where only one body is present when
a SolidWorks file is opened containing multiple bodies will be resolved by code changes
made to the upcoming release of our software NX 9.0.
1824588
Siemens PLM believes that the problem you reported where Customer Defaults not used for
NX-Flat-Pattern Display will be resolved by code changes made to the upcoming release of
our software NX 9.0. The scope of the affected customer defaults will now be correctly listed
as Scope = Part. Display of the Sheet Metal Flat Pattern view is currently controlled by
Sheet Metal Preferences. So the requirement to be able to easily change the display of Flat
Pattern curves to the current customer defaults is added as an Enhancement Request.
1830845
Siemens PLM believes that the problem you reported where the geometry referenced by a
constraint would not highlight when the constraint is selected will be resolved by code
changes made to the upcoming release of our software NX 9.0.
1834713
Siemens PLM believes that the problem you reported where there were performance issues
while editing an Edge Blend feature will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1839224
Siemens PLM believes that the problem you reported where after xml_export the
markingline and text for the knuckle are missing will be resolved by code changes made to
the upcoming release of our software NX 9.0.
1840186
CAD: large distance between formula dimension and sketch line in bottom view.
1843439
Siemens PLM believes that the problem you reported where Cuve Projection fails if the
curves are joined during projection will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1844419
Siemens PLM believes that the problem you reported where the Thicken feature introduces
Self Intersections and Tiny Objects which cause downstream problems in drawing views
later on in Drafting, will be resolved by code changes made to the upcoming release of our
software NX 9.0.
1845091
Siemens PLM believes that the problem you reported where exporting a component to STEP
format, then re-importing the STEP file resulted in an incorrect component position will be
resolved by code changes made to the upcoming release of our software NX 9.0.
1845316
Siemens PLM believes that the problem you reported where the Documentation for
reference set "Entire Part" is not clear. will be resolved by code changes made to the
upcoming release of our software NX 9.0. The problem where the documentation for
reference sets needed a note that, when a parent's reference set needs to hide child parts,
the child's reference set should be set to Empty is fixed in release NX 9.0.
1845709
Siemens PLM believes that the problem you reported where the Path Setting Towards
Corner needs to break Corners will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1846494
Siemens PLM believes that the problem you reported where a specific Solidworks file would
not open will be resolved by code changes made to the upcoming release of our software
NX 9.0.
1847697
Siemens PLM believes that the problem you reported where deleting a component (without
the Assemblies application active) would leave an assemblies license checked out has been
fixed. . This problem will be resolved by code changes made to the upcoming release of our
software in NX 9.0. If the Assemblies application is not active then a license will be checked
out in order to perform the component deletion, but checked back in again immediately. If
the Assemblies application is active the behavior is as before, i.e. a license will be checked
out and kept for thirty minutes after the last operation requiring a license or until the user
deactivates the Assemblies application, whichever is sooner.
1849766
Siemens PLM believes that the problem you reported where Setting the customer default for
Teamcenter Intergration for NX -> General -> General -> "Use item name instead of item
number", causes problems with interpart expressions due to item names don't have to be
unique, will be resolved by code changes made to the upcoming release of our software NX
9.0. The problem where item names are used for interpart expressions when item numbers
are more persistent is fixed in NX 9.0 via a new TCE customer default: "Always use Item
Number for Interpart Expressions" This option determines whether the Item Number is used
instead of the Item Name in interpart expression throughout the Teamcenter Integration user
interface.
1852880
Siemens PLM believes that the problem you reported where opening a project in NX
Teamcenter Navigator Projects took too long, will be resolved by code changes made to the
upcoming release of our software TC8.3.2.5.
1853741
Siemens PLM believes that the problem you reported where performing a feature playback
causes a face to change color, will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1855752
Siemens PLM believes that the problem you reported where Flat Solid creates incorrect
flatten hole will be resolved by code changes made to the upcoming release of our software
NX 9.0.
Note: to verify the fix, please recreate Flat Solid in NX 9.0.
1859505
1861170
Siemens PLM believes that the problem you reported where no sample trackpoint example
exists for turning tools in the OOTB database will be resolved by code changes made to the
upcoming release of our software NX 9.0.
1863808
Siemens PLM believes that the problem you reported where View Section Object changes
layer will be resolved by code changes made to the upcoming release of our software NX
9.0. In NX 9.0, layer control has been added to the View Section dialog. This allows the user
to control whether the section curves will always stay on the work layer, or whether they stay
on a user-specified layer. The default behavior is to keep the associated section curves on
the current work layer.
1864159
Siemens PLM believes that the problem you reported where the user documentation needs
to reference both methods of setting the Checkmate Log Directory will be resolved by code
changes made to the upcoming release of our software NX 9.0. A note was added that
documents the environment variable UGII_CHECKMATE_LOG_DIR to also reference the
customer default setting that sets the default location for the logs.
1870849
Siemens PLM believes that the problem you reported where performance issues were
observed using the Replace Component command, will be resolved by code changes made
to the upcoming release of our software NX 9.0.
1871333
Siemens PLM believes that the problem you reported where External Sketch for Holes is not
available in timestamp mode ( PNT) will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1872014
Siemens PLM believes that the problem you reported where offset in face with fillet sharp
corner delivers different results, will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1876973
Siemens PLM believes that the problem that you reported where meshing a specific .prt file
with ctetra10 elements in NX 8.0 resulted in a highly refined mesh in one region of the model
where a uniform mesh was expected will be resolved by code changes made to the
upcoming release of our software NX 9.0.
1877884
Siemens PLM believes that the problem you reported where View dependent Edit is not
working correctly when trying to Edit Object Segment on round edge of cylindrical face will
be resolved by code changes made to the upcoming release of our software NX 9.0.
1878619
Siemens PLM believes that the problem you reported where the Hole Table fails to update
will be resolved by code changes made to the upcoming release of our software NX 9.0.
1878747
Siemens PLM believes that the problem you reported where ugtopv.exe would not translate
parts with reference set names containing special characters, will be resolved by changes
made to the upcoming release of our software NX 9.0.
1878966
Siemens PLM believes that the problem you reported where Flat Pattern does not update for
closed corner Miter option, will be resolved by code changes made to the upcoming release
of our software NX 9.0.
1879436
Siemens PLM believes that the problem you reported where Orient Assembly angle
constraint solver fails when using edges will be resolved by code changes made to the
upcoming release of our software NX 9.0.
1879537
Siemens PLM believes that the problem you reported where the hole table did not recognize
Counterbored holes as Counterbored holes when the body the Counterbored holes were in
was not planar to the absolute coordinate system, will be resolved by code changes made to
the upcoming release of our software NX 9.0.
1880445
Excel automation error COM error code 80010100 create Part Family members.
1882087
Siemens PLM believes that the problem you reported where there was an "Unkbnown error"
editing SB LOUVER feature without sheetmetal license", will be resolved by code changes
made to the upcoming release of our software NX 9.0.
1882667
ugtopv can\220t handle Reference Sets with names that contain special characters.
1883397
Siemens PLM believes that the problem you reported where System Shows MachineCoordinates (during external NC-Code Simulation) which are not based on MCS will be
resolved by code changes made to the upcoming release of our software NX 9.0.
1883763
1886071
1886091
Siemens PLM believes that the problem you reported where certain letters created from
Curve Text will not extrude, will be resolved by code changes made to the upcoming release
of our software NX 9.0.
1886202
1888627
Siemens PLM believes that the problem you reported where Weld Features listed in Feature
Groups are not updated correctly in Part Navigator will be resolved by code changes made
to the upcoming release of our software NX 9.0.
1888720
1889212
Siemens PLM believes that the problem you reported where bundle information was not
displayed properly will be resolved by code changes made to the upcoming release of our
software NX 9.0 ip13.
1889379
Siemens PLM believes that the problem you reported where thermal mapping fails with an
error stating that there is no support of mixed order elements in universal file will be resolved
by code changes made to the upcoming release of our software NX Advanced Simulation,
Version 9.0.
1890941
Siemens PLM believes that the problem you reported where direct open Solidworks multibody part removes a body will be resolved by code changes made to the upcoming release
of our software NX 9.0.
1891551
Siemens PLM believes that the problem you reported where some solid bodies would not
Unite successfully will be resolved by code changes made to the upcoming release of our
software NX 9.0.
1891867
Siemens PLM believes that the problem you reported where the code which was recorded in
a journal when performing "<RMB>Style -> Visible Lines -> Color -> De-select All -> Apply"
did not work on Playback, will be resolved by code changes made to the upcoming release
of our software NX 9.0.
1892512
Siemens PLM believes that the problem you reported where the secondary dimension of a
Dual Dimension was not readable when exporting the part as a DXF file using 2D Exchange,
will be resolved by code changes made to the upcoming release of our software NX 9.0.
1892605
Siemens PLM believes that the problem you reported where a new point-on-curve sketch
geometric constraint takes longer then 6 minutes to complete will be resolved by code
changes made to the upcoming release of our software NX 9.0.
1892924
Siemens PLM believes that the problem you reported where the documentation for the
Enlarge Surface Mold Tool needs to reflect the new dialogs and text, will be resolved by
code changes made to the upcoming release of our software NX 9.0.
1893686
Siemens PLM believes that the problem you reported where a Sketch gets underconstrained after performing a Pattern Curves in the sketch, will be resolved by code
changes made to the upcoming release of our software NX 9.0.
1894391
Siemens PLM believes that the problem you reported where the Arc of a symbolic thread
disappears on drawing with Extracted Edges ON, will be resolved by code changes made to
the upcoming release of our software NX 9.0.
1895311
Siemens PLM believes that the problem you reported where CSE shows wrong and
misleading Error Message will be resolved by code changes made to the upcoming release
of our software NX 9.0.
1895712
Siemens PLM believes that the problem you reported where Change border line visibility of
parts list result incorrectly will be resolved by code changes made to the upcoming release
of our software NX 9.0.
1895864
Siemens PLM believes that the problem you reported where "Performing Clearance Analysis
does not give results" will be resolved by code changes made to the upcoming release of our
software NX 9.0.
1896704
Siemens PLM believes that the problem you reported where highlight/selection performance
on large parts was slow will be resolved by code changes made to the upcoming release of
our software NX 9.0. In NX 9.0, with the completion of projects arch9106 and camarch9044,
the display of both visible and hidden geometry is much faster. This performance increase is
due to the saving of display information in the part file after the first time a solid has
displayed. The original times in A2760160600_CAM.prt to display upon selection were:
CAVITY MILL 25 sec. WORKPIECE 20 sec. In NX 9.0, when the the old part is opened, the
display is slower the very first time. After that, it is much faster than ever before. For
example: CAVITY MILL 30 sec the first time, <1 sec after that. WORKPIECE <1 sec
(because geometry was already displayed by CAVITY MILL). Going forward, once the solids
are displayed in the components and the parts are saved in NX 9.0, the performance the
very first time is also much faster. For example: CAVITY MILL 7 sec the first time, <1 sec
after that. WORKPIECE < 1 sec (because geometry was already displayed by CAVITY
MILL).
1897168
Siemens PLM believes that the problem you reported where the Chamfer feature is incorrect
in the SB flat Solid results for this model will be resolved by code changes made to the
upcoming release of our software NX 9.0.
Note - newly created chamfers will now be correct. Existing chamfers will need to be
recreated in order to achieve the new results.
1897337
Siemens PLM believes that the problem you reported where the external thread curve is
incorrectly displayed on a cylinder which has a slot cutout containing a blended edge will be
resolved by code changes made to the upcoming release of our software NX 9.0.
1898019
1898541
Siemens PLM believes that the problem you reported where Feature Playback in NX 6.0.5.3
MP12 generates an update failure will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1899158
Siemens PLM believes that the problem you reported where the Flat Pattern view was not
available for selection when a template was dragged and dropped will be resolved by code
changes made to the upcoming release of our software NX 9.0.
1899213
Siemens PLM believes that the problem you reported where the problem where Part file size
increases from about 180MB to 1.1GB after Subtract Operations will be resolved by code
changes made to the upcoming release of our software NX 9.0.
Note: Since we added version control that the Pre-NX 9.0 features still behave as before,
please create same new boolean features in NX 9.0 to see the improvement.
1899430
Siemens PLM believes that the problem you reported where Import Assembly into
Teamcenter fails using OVERWRITE on all parts if the user importing the parts does not
have write access to one of the parts being imported, will be resolved by code changes
made to the upcoming release of our software NX 9.0.
1900273
Siemens PLM believes that the problem you reported where "Show Thickness By Color"
does not show the correct result will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1900308
Siemens PLM believes that the problem you reported where the NX Sheet Metal "Unbend"
command did not allow the bend region of a Gusset to be selected during the Select Curve
or Point step of the Unbend selection steps, will be resolved by code changes made to the
upcoming release of our software NX 9.0.
1900360
Siemens PLM believes that the problem you reported where Feature Update Error text
written in multiline inconsistently will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1900730
Siemens PLM believes that the problem you reported where Java Selection documentation
needs correction for all selection methods will be resolved by code changes made to the
upcoming release of our software NX 9.0.
1900941
Siemens PLM believes that the problem you reported where the dimension extension line to
datum plan contains an incorrect gap size will be resolved by code changes made to the
upcoming release of our software NX 9.0.
1901649
Siemens PLM believes that the problem you reported where extra bends are created in a flat
pattern will be resolved by code changes made to the upcoming release of our software NX
9.0.
1901912
Siemens PLM believes that the problem you reported where importing a DXF file the
tolerances on dimensions come in very large, will be resolved by code changes made to the
upcoming release of our software NX 9.0.
1902611
Siemens PLM believes that the problem you reported where activate (Search Object
Hierarchy During Action Object) described in NX 7.5 (does not disturb in NX 5) will be
resolved by code changes made to the upcoming release of our software NX 9.0.
1902926
Siemens PLM believes that the problem you reported where fort.151 makes the second
concurrent solve fail because it tries to write to fort.151 created by the first solve will be
resolved by code changes made to the upcoming release of our software NX Advanced
Simulation Version 8.5 and Version 9.0.
1904505
Siemens PLM believes that the problem you reported where Shaded detail view has
artefacts when exported to PDF will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1904569
Siemens PLM believes that the problem you reported where a Solidworks file opened in NX
does not import all objects will be resolved by code changes made to the upcoming release
of our software NX 9.0.
1904690
Siemens PLM believes that the problem you reported where NX Sheetmetal causes a step
at the edge of a bend will be resolved by code changes made to the upcoming release of our
software NX 9.0.
1904736
Siemens PLM believes that the problem you reported where unable to create a body during
an extrude operation will be resolved by code changes made to the upcoming release of our
software NX 9.0.
1904941
Siemens PLM believes that the problem you reported where larger animations were not
responding to the stop button will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1904949
Siemens PLM believes that the problem you reported where the Russian translation in NX8
for "Stock" tab and "Cut" on the Feeds and Speed UI was wrong will be resolved by code
changes made to the upcoming release of our software NX 9.0.
1905109
Siemens PLM believes that the problem you reported where NX may use the wrong decimal
separator character when exporting results to Excel will be resolved by code changes made
to the upcoming release of our software NX 9.0.
1905463
Siemens PLM believes that the problem you reported where a specific hollow feature in a
NX 6.0.5 part file fails to update in NX 8.0.2 will be resolved by code changes made to the
upcoming release of our software NX 9.0.
1905608
Siemens PLM believes that the problem you reported where an Edge Blend failed in NX
8.0.1, that updated successfully in NX 6, NX 7.5 and NX 8.0, will be resolved by code
changes made to the upcoming release of our software NX 9.0.
1905866
Siemens PLM believes that the problem you reported where the RecurDyn solver gives
incorrect results will be resolved by code changes made to the upcoming release of our
software in NX Motion Simulation Version 8.5. Note that the first reported problem is due to
incorrect usage. please change the first value of drv 02_Lenkung, revolute in excel file to
zero.
1905867
Siemens PLM believes that the problem you reported where No warning given when
lightweight representation/facet fails to generate on save will be resolved by code changes
made to the upcoming release of our software NX 9.0. Information on Lightweight body will
now list if there body has any errors.
1906235
Siemens PLM believes that the problem you reported where crosshatch incorrectly overlaps
internal and external threads for a threaded shaft/hole pair where there exists a second
threaded shaft/hole pair contained within the first will be resolved by code changes made to
the upcoming release of our software NX 9.0.
1906319
Siemens PLM believes that the problem you reported where blend feature that worked in NX
6.0.5 fails to update in NX 8.0.2, will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1906405
Siemens PLM believes that the problem you reported where checking the material
orientation for an axisymmetric model comprising ctriax6 elements (for which a 'material
orientation angle' has been defined) using the command: 'analysis, finite element model
check, element material orientation' results in an incorrect message indicating that every
element has been 'skipped due to invalid orientations' will be resolved by code changes
made to the upcoming release of our software NX 9.0.
1906834
Siemens PLM believes that the problem you reported where driving dimensions are not
recognized as objects on layers will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1907083
Siemens PLM believes that the problem you reported where UNC paths were not supported
in the command line translator syntax will be resolved by code changes made to the
Siemens PLM believes that the problem you reported where NX start fails with an OS
exception caused by an invalid "Frame Marker" registry key will be resolved by code
changes made to the upcoming release of our software NX 9.0.
1907294
1907360
Siemens PLM believes that the problem you reported where a Hole Suppressed By
Expression fails to update when unsuppressed by condition will be resolved by code
changes made to the upcoming release of our software NX 9.0.
1907702
Siemens PLM believes that the problem you reported where the Blockstyler documentation
refers to invalid SnapFocusOption property will be resolved by code changes made to the
upcoming release of our software NX 9.0.
1907722
Siemens PLM believes that the problem you reported where the
SnapPointTypesOnByDefault property is not documented consistently for all Blockstyler
Blocks will be resolved by code changes made to the upcoming release of our software NX
9.0.
1907737
Siemens PLM believes that the problem you reported where Section in view didn't work in a
arrangement view. will be resolved by code changes made to the upcoming release of our
software NX 9.0.
1908053
Siemens PLM believes that the problem you reported where the object names of dimensions
were changed after exporting a part, will be resolved by code changes made to the
upcoming release of our software NX 9.0.
1908214
Siemens PLM believes that the problem you reported where the documentation did not
mention the need for an additional update after calling
NXOpen.Annotations.SimpleDraftingAid.SetText() will be resolved by documentation
changes made to the upcoming release of our software NX 9.0.
1908314
Siemens PLM believes that the problem you reported where the CSYS was not selectable
will be resolved by code changes made to the upcoming release of our software NX 9.0.
1908736
Siemens PLM believes that the problem you reported where Documentation needs more info
on %ui_comp and relevant functions will be resolved by code changes made to the
upcoming release of our software NX 9.0.
1908884
Siemens PLM believes that the problem you reported where importing Solid Works Part,
would show nothing after import will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1909146
Siemens PLM believes that the problem you reported where the documentation for the Open
C function UF_UGMGR_reg_new_dataset_name() was not correct will be resolved by code
changes made to the upcoming release of our software NX 9.0.
1909316
Problem with save as if there is a upart with relation spec. and mani.
1909373
Siemens PLM believes that the problem you reported where rendering Kanji characters with
UF_DRF_render_text() fails will be resolved by code changes made to the upcoming release
of our software NX 9.0.
1909765
Siemens PLM believes that the problem you reported where will be resolved by code
changes made to the upcoming release of our software NX 9.0.
1909813
Siemens PLM believes that the problem you reported where NX crashed when opening NX
6 drawings in NX 8 using Lightweight loading will be resolved by code changes made to the
upcoming release of our software NX 9.0.
1909962
Siemens PLM believes that the problem you reported where the NX Nastran solution
parameter BETA cannot be defined as a complex number will be resolved by code changes
made to the upcoming release of our software NX 9.0.
1910376
Siemens PLM believes that the problem you reported where a drawing sheet is out of date
when it contains a section view cut through a Circular Array, will be resolved by code
changes made to the upcoming release of our software NX 8.5.3 and NX 9.0.
1910642
Siemens PLM believes that the problem you reported where assembly constraints don't
appear in the constraint navigator will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1910674
1910689
Siemens PLM believes that the problem you reported where NX ignored negative values in
the "Resize Parameters" field of enlarge surface, will be resolved by code changes made to
the upcoming release of our software NX 9.0.
1910752
Siemens PLM believes that the problem you reported where the DraftingView class
reference needs to mention the DraftingViewCollection source will be resolved by code
changes made to the upcoming release of our software NX 9.0.
1910941
Siemens PLM believes that the problem you reported where an assembly imported
incorrectly, will be resolved by code changes made to the upcoming release of our software
NX 9.0.
1910991
Siemens PLM believes that the problem you reported where drilling tool display is wrong
with a Shank and Tool Holder defined will be resolved by code changes made to the
upcoming release of our software NX 9.0.
1911052
Siemens PLM believes that the problem you reported where selecting a Teach Mode
operation from the Operation Navigator with the Manufacturing Preference "Display Turning
IPW of Selected Objects" turned on causes NX to terminate will be resolved by code
changes made to the upcoming release of our software NX 9.0. The termination of NX was
caused by a corrupt part and blank geometry. The termination has been fixed in NX 9.0,
however the generated tool path still may be incorrect. To fix this problem the part and the
blank geometry must be removed and chained again.
1911183
Siemens PLM believes that the problem you reported where Internal error received to SAVE
All using Connected Face Finder will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1911226
Siemens PLM believes that the problem you reported where the Hole Table does not
include some simple holes using window selection, will be resolved by code changes made
to the upcoming release of our software NX 9.0.
1911626
Siemens PLM believes that the problem you reported where IDEAD Splines inside prt avoid
JT translation will be resolved by code changes made to the upcoming release of our
Siemens PLM believes that the problem you reported where NX hangs/fails to respond when
creating section view of JT file will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1911762
Siemens PLM believes that the problem you reported where a group of elements (ELSETs)
for shell meshes was incorrectly imported will be resolved by code changes made to the
upcoming release of our software NX 9.0.
1911998
Siemens PLM believes that the problem you reported where ugto2d.exe fails, pim=yes
stated as file-name will be resolved by code changes made to the upcoming release of our
software. Per SIEMENS/NX documentation group: %UGII_BASE_DIR%\\ugto2d\\ugto2d.exe
i=@DB/000201/A -pim=yes -u=username -p=password And for a drawing:
%UGII_BASE_DIR%\\ugto2d\\ugto2d.exe i=@DB/000201/A/specification/<datasetname>
-pim=yes -u=username -p=password.
1912003
1912109
Siemens PLM believes that the problem you reported where the label of a section view gets
toggled of when using 'Load Defaults" in drafting, will be resolved by code changes made to
the upcoming release of our software NX 9.0.
1912161
1912231
The problem where initializing the Manufacturing Setup with the Customer default
"Machining Data - Automatically Set in Operation' turned on and using a template part which
contains operations causes 'No Part Material Defined' errors to appear is fixed in NX 9.0.
1912309
Siemens PLM believes that the problem you reported where Performance for searching
Tools inside NX/CAM over InClass tooks to long will be resolved by code changes made to
the upcoming release of our software NX 9.0.
1912421
Siemens PLM believes that the problem you reported where Drawing cannot be opened error code 734010 will be resolved by code changes made to the upcoming release of our
software NX 9.0.
1912454
Siemens PLM believes that the problem you reported whereTabular Label handling menu
(MB3) not translated into German will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1912462
Siemens PLM believes that the problem you reported where the Mold CSYS transforms to a
non-scaled position when using the ESI template will be resolved by code changes made to
the upcoming release of our software NX 9.0.
1912529
Selection (red color) in PNT kept after leaving Assign Feature Group Color.
1913108
Siemens PLM believes that the problem you reported where MTD Simulation - throws error The given junction name is invalid will be resolved by code changes made to the upcoming
release of our software NX 8.5.2 and NX 9.0.
1913193
Siemens PLM believes that the problem you reported where Abaqus beam general section
is imported incorrectly will be resolved by code changes made to the upcoming release of
our software NX 9.0.
1913216
1913732
Siemens PLM believes that the problem you reported the supplied part failed to open raising
a Feature Control Frame error, will be resolved by code changes made to the upcoming
release of our software NX 9.0. A fixed file can be supplied by GTAC upon request.
1914098
Siemens PLM believes that the problem you reported where GetResultObjectNames fails
after PDMSearch.Simple in NX 8 will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1914129
Siemens PLM believes that the problem you reported where a STEP file fails to open in NX
8 will be resolved by code changes made to the upcoming release of our software version
NX 9.0.
1914164
Siemens PLM believes that the problem you reported where the message "This orientation
of bodies is not supported" when creating Bridge Transition will be resolved by code
changes made to the upcoming release of our software NX 9.0.
1914267
Siemens PLM believes that the problem you reported where "In the ANT the Status for
Modified Parts doesn't Display Correctly" will be resolved by code changes made to the
upcoming release of our software NX 9.0.
1914300
Siemens PLM believes that the problem you reported where DB_PART_NAME &
DB_PART_DESC attributes may or may not be locked when saving as a new Item
depending on if the 'Assign ID and Revision Automatically' option is set will be resolved by
code changes made to the upcoming release of our software NX 8.5. The documentation will
also be updated in NX 9.0 to add that these attributes are modifiable when the customer
default is set to ON.
1914403
1914466
Siemens PLM believes that the problem you reported where in CSE for a Heidenhain
controller, the 'In Proc Workpiece' is wrong when using the "With Motion Based" option will
be resolved by code changes made to the upcoming release of our software NX 9.0. Helix
processing in IPW is fully implemented.
1914469
Siemens PLM believes that the problem you reported where it's not possible to delete a
system attribute (locked) will be resolved by code changes made to the upcoming release of
our software NX 9.0.
1914582
Siemens PLM believes that the problem you reported where Auto Dimensioning in sketch
moves object to another location, will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1914662
1914684
Siemens PLM believes that the problem you reported where generating a Blade Finish
operation produces incorrect tool path motion will be resolved by code changes made to the
upcoming release of our software NX 9.0.
1914718
Siemens PLM believes that the problem you reported where help documentation mis-leading
re: defining centrifugal load/geometry selection will be resolved by documentation changes
made to the upcoming release of our software NX 9.0.
1914777
Siemens PLM believes that the problem you reported where plmxml export will not export
named references that begin with a dot will be resolved by code changes made to the
upcoming release of our software Teamcenter 10.0.
1914899
Siemens PLM believes that the problem you reported where Revolved section view is
missing thread on hole will be resolved by code changes made to the upcoming release of
our software NX 9.0.
1915182
Siemens PLM believes that the problem you reported where Boolean Face Properties from
the tool body are not applied to an extrude target body but a block body will be resolved by
code changes made to the upcoming release of our software NX 9.0.
1915352
Siemens PLM believes that the problem you reported where CAM: Generate operation adds
extra tool to ANT will be resolved by code changes made to the upcoming release of our
software NX 8.0.3 MP2, NX851.2, NX 9.0.4
1915412
Siemens PLM believes that the problem you reported where Flexible PCB Unbend fails with
error "The selected bends must be chained to the stationary face" will be resolved by code
changes made to the upcoming release of our software NX 9.0.
Note: For older part files (created prior to NX 9.0) it is recommended to re-create the Unite
feature in released NX 9.0 or later versions.
1915908
Siemens PLM believes that the problem you reported where NX issues an error when
copying an operation from one part to another part will be resolved by code changes made
to the upcoming release of our software NX 9.0.
1916127
Siemens PLM believes that the problem you reported where Edit Associativity of Dimension
ignores Quick Pick selection will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1916240
Siemens PLM believes that the problem you reported where 'Make Unique is not working
correctly with JT Multicad data' reports the following 2 issues when the component part does
not have a NX dataset:
1) Make unique renames all instances whose part is same as the selected component.
2) Make unique causing other instances of selected part to remain unloaded. Attempt to
open the part results into error.
Both these issues will be resolved by code changes made to the upcoming release of our
software NX 9.0.
1916305
Siemens PLM believes that the problem you reported where Dwell event does not work
correctly in Synch Manager, will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1916451
Siemens PLM believes that the problem you reported where "Cannot translate
"MInsertBlocks" from Applicon-Bravo using DXF" will be resolved by code changes made to
the upcoming release of our software NX 9.0.
1916495
Siemens PLM believes that the problem you reported where Electrode Design denies to add
Blank parts from Teamcenter will be resolved by code changes made to the upcoming
release of our software NX 9.0. With this fix, the blank templates parts imported to TC can
be used successfully. But note to modify the file blank_reg.xlsx with the same workflow as
MW:
(1) add a new column named ACTION;
(2) remove ".prt" in MODEL cell;
(3) set value in ACTION column to TCE_CLONE. For drafting templates, note that the local
template files MUST not be deleted even they are imported to TC since they are searched
and listed in Sheet Type of dialog box.
1916599
Siemens PLM believes that the problem you reported where Automatic group by material is
not working for MAT8 will be resolved by code changes made to the upcoming release of our
software NX 9.0 (September 2013).
1916626
1916673
1916674
Siemens PLM believes that the problem you reported where edit with rollback on any feature
makes NX hang (in a loop) will be resolved by code changes made to the upcoming release
of our software NX 9.0. Note: Customer is seeking information about when he runs into this
issue and looses all his work. Having fixed the problem after doing root cause analysis, it is
confirmed that the issue was related to feature update. User will not loose his work due to
this issue. In case of doubt, simple workaround can be followed:
1) use Edit (without rollback)
2) Also a full feature playback and partcleanup and save, does fix this part.
1916741
1916792
Siemens PLM believes that the problem you reported where generation of the spun outline
for the given solid body fails will be resolved by code changes made to the upcoming release
of our software NX 9.0. A workaround for this specific case is by setting the Radial Blank
Stock to -0.001 ( inches ).
1916895
Siemens PLM believes that the problem you reported where wrong solution in project curve
will be resolved by code changes made to the upcoming release of our software P9.0 ip12.
1916958
Siemens PLM believes that the problem you reported where the engage and retract types to
use tool axis / distance in old-style point-to-point using the Russian language would cause a
system crash - will be resolved by code changes made to the upcoming release of our
software NX 9.0.
1916985
Siemens PLM believes that the problem you reported where not visible blend face will be
resolved by code changes made to the upcoming release of our software P9.0 ip 9.
Parasolid indicates the faceting issue was the result of the faulty edge blend code priory to
NX 9.0. The edge blend code has now been fixed in ps26.00.093 and it cannot be backported to previous versions of Parasolid.
1917030
Siemens PLM believes that the problem where resolved constraints appear in conflict in a
cloned solution is fixed in release NX 9.0.
1917179
1917330
Siemens PLM believes that the problem you reported where MT10420 Workpiece fails with
"There are no visible part occs" will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1917393
Siemens PLM believes that the problem you reported where Unbend operation not possible
for a Flexible PCB will be resolved by code changes made to the upcoming release of our
software NX 9.0.
1917426
Siemens PLM believes that the problem you reported with ZLEVEL PROFILE - Extend
edges will be resolved by code changes made to the upcoming release of our software NX
9.0.
1917474
Siemens PLM believes that the problem you reported where Dialog memory for fillet weld
throat thickness is not working will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1917512
Siemens PLM believes that the problem you reported where the MT10420 "Design a SubInsert" chapter fails with an error "There is no visible component" will be resolved by code
changes made to the upcoming release of our software NX 9.0.
1917887
Siemens PLM believes that the problem you reported where incomplete Contact Mesh gives
incorrect message in Model Setup Check will be resolved by code changes made to the
upcoming release of our software NX 9.0 Message has been modified from : ACTION: Use
the "Edit Mesh Associated Data" dialog to define a closed gap stiffness for the mesh. To :
ACTION: Edit the mesh's physical property to define a closed gap stiffness for the mesh.
1917941
Active curves become converted to reference curves when using mirror curve.
1918072
Siemens PLM believes that the problem you reported where 'Sketch on invisible layer
remains invisible on editing' will be resolved by code changes made to the upcoming release
of our software NX 9.0.
1918102
Siemens PLM believes that the problem you reported where Rigid Body has not to penetrate
the Collision Body will be resolved by code changes made to the upcoming release of our
software NX 9.0.
1918504
Siemens PLM believes that the problem you reported where sketch object disappears while
dragging in drafting when "Snap to Grid" is enabled will be resolved by code changes made
to the upcoming release of our software NX 9.0.
1918532
Siemens PLM believes that the problem you reported where the Step File Fails to Open will
be resolved by code changes made to the upcoming release of our software NX 9.0.
1918819
Siemens PLM believes that the problem you reported where circular update with Mirror /
Pattern of Sketch with CPROJ with points will be resolved by code changes made to the
upcoming release of our software NX 9.0 ip14.
1919059
Siemens PLM believes that the problem you reported where Export part changes Section
Surface definition by Law Curve will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1919066
Siemens PLM believes that the problem you reported where Pattern Face does not work as
expected - will be resolved by code changes made to the upcoming release of our software
NX 9.0.
1919092
Siemens PLM believes that the problem you reported where the problem with sheet metal
--> Closed Corner --> U Cutout --> Miter is giving an unexpected result, will be resolved by
code changes made to the upcoming release of our software NX 9.0.
1919231
1919240
Siemens PLM believes that the problem you reported where the Leader Origin does not
update when a part is imported to new location will be resolved by code changes made in
the next maintenance release for NX 8.5 and NX 9.0. Please see the version release notes
for confirmation.
1919362
Siemens PLM believes that the problem you reported where feed rate is not shown in the
'Feeds and Speeds' dialog will be resolved by code changes made to the upcoming release
of our software NX 9.0. For the passes with feed rate 0.0, the 'Last Rough Cut' feed rate is
applied. The problem is that this feed rate is not shown in the 'Feeds and Speeds' dialog,
when Contour roughing mode is selected. This has been fixed in NX 9.0. The Last Rough
Cut is now shown and can be changed. The current setting of this parameter is 0.005% of
Cut, which explains the observed 'scaling'. To apply Cut feed rate for the passes in question,
change the setting to 100% of Cut. As work-around until the fix is available, the setting can
be changed in the following way: - Switch Cut Strategy to Linear Zig. - Open Feeds and
Speed dialog. - In Rough Feed Rates group, change Last Rough Cut feed rate to 100% of
Cut. - Ok. - Switch Cut Strategy to back to Contour Zig. - Generate.
1919717
Caught com error 80010100 error during Part Family Members creation.
1919745
Siemens PLM believes that the problem you reported where Facefinder crashes when
saving weldpoints will be resolved by code changes made to the upcoming release of our
software NX 9.0.
1919777
Siemens PLM believes that the problem you reported where "additional curve (arc) are
ignored in a Flat Pattern" will be resolved by code changes made to the upcoming release of
our software NX 9.0.
1920077
NX start fails with OS exception caused by invalid "Frame Marker" registry key.
1920193
The problem you reported where T(KZZ) missing when exporting MATT5 from NX will be
resolved by code changes made to the upcoming release of our software NX 9.0.
1920399
Siemens PLM believes that the problem you reported where the view label letter was getting
removed along with any unnecessary label entries will be resolved by changing the code to
remove only view label entries and not to remove the view label letter. The fix will be
available in the upcoming release of our software NX 8.5.1. In addition code has been added
to again show the section view labels which have been removed because of an earlier part
cleanup. This part of the fix will by available in the upcoming release of our software NX 9.0.
1920508
Siemens PLM believes that the problem you reported where wrong test status message is
shown when Russian characters are used will be resolved by code changes made to the
upcoming release of our software NX 9.0.
1920670
Siemens PLM believes that the problem you reported where Performance increased issue
(instance array vs. pattern feature) will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1920719
1920867
Siemens PLM believes that the problem you reported where some formal errors are now
treated as warnings will be resolved by code changes made to the upcoming release of our
software NX 9.0. Check-Mate's Update All Features checker now is enhanced with two new
options to report update warning messages and informational messages. The default setting
Siemens PLM believes that the problem you reported where View Dependent Edit line font
changes are lost after the Hidden Line style is changed, will be resolved by code changes
made to the upcoming release of our software NX 9.0.
1921160
Siemens PLM believes that the problem you reported where the NX 8.5 installer doesn't
work if the installation language is set to Italian will be resolved by code changes made to
the upcoming release of our software NX 9.0. As a workaround for NX 8.5 an updated
translation file was provided to GTAC, while the simplest way is just to install NX 8.5 in
English.
1921166
Siemens PLM believes that the problem you reported where minimum distance gave
different results depending on the selection location, will be resolved by code changes made
to the upcoming release of our software NX 9.0.
1921246
Siemens PLM believes that the problem you reported where X hangs due to special
characters being used with the tool description will be resolved by code changes made to
the upcoming release of our software NX 9.0. This is fixed due to the deployment of Tcl8.4
which can also be activated for NX 8.5 by setting the environment variable
UGII_TCL84_LIBRARY to 1.
1921370
Siemens PLM believes that the problem you reported where couldn't create flat pattern will
be resolved by code changes made to the upcoming release of our software NX 9.0.
1921578
Siemens PLM believes that the problem you reported where the limitations of significant part
operations within the UF_open_part_reason callback is not documented will be resolved by
code changes made to the upcoming release of our software NX 9.0. Changing the
displayed part inside the open part callback is not supported. Nor in fact is any other
significant part operation like opening other parts or saving parts and so on. The
documentation has been updated to reflect this accordingly.
1921582
Siemens PLM believes that the problem you reported where Holetable update is incorrect
will be resolved by code changes made to the upcoming release of our software P9.0 ip11.
1921752
Siemens PLM believes that the problem you reported where the Customer Default
MW_StandardDefaultRefset still lists BOTH as option will be resolved by code changes
made to the upcoming release of our software NX 9.0.
1921754
Siemens PLM believes that the problem you reported where NX calculates a wrong flat
pattern, will be resolved by code changes made to the upcoming release of our software NX
9.0 ip 9.
1921857
Siemens PLM believes that the problem you reported where 'Export Drawings to
Teamcenter' did not show the correct output will be resolved by code changes made to the
upcoming release of our software NX 9.0.
1922076
Siemens PLM believes that the problem you reported where it is not possible to resize the
bend radius for adjacent bends of a contour flange, will be resolved by code changes made
to the upcoming release of our software NX 9.0.
Note: The Resize Bend Radius feature will need to be recreated to get this fix.
1922117
Siemens PLM believes that the problem you reported where in the Global Shaping
command the selection intent is not maintained will be resolved by code changes made to
the upcoming release of our software NX 9.0.0.6.
1922389
Siemens PLM believes that the problem you reported where the parameters required in the
sheet metal material table file were not mentioned in tdoc will be resolved by code changes
made to the upcoming release of our software NX 9.0.
1922404
Siemens PLM believes that the problem you reported where it was not possible to select
nodes from multiple meshes simultaneously when 'clipped work section' was turned 'on' will
be resolved by code changes made to the upcoming release of our software NX 9.0.
1922445
Siemens PLM believes that the problem you reported where "PMI "References" objects are
still highlighted after cancel" will be resolved by code changes made to the upcoming
release of our software NX 9.0 ip11.
1922795
Siemens PLM believes that the problem you reported where it's not possible or takes long
time to make a feature to current feature is fixed with NX 9.0.
1922887
Siemens PLM believes that the problem you reported where 'evaluate response results'
function is very slow... will be resolved by code changes made to the upcoming release of
our software NX 9.0.
1922907
Siemens PLM believes that the problem you reported where Spun Outline was incorrect will be resolved by code changes made to the upcoming release of our software NX 9.0.
1922934
Siemens PLM believes that the problem you reported where DOC: "Insert/Curve from
Bodies/Extract.../Shadow Outline" does not help Customer will be resolved by code changes
made to the upcoming release of our software NX 9.0. Reformatted the Shadow Outline
page text and graphics and added the following procedure based on Step 7 from the PR
Text: To execute this option:
1.From the View toolbar set the work view to Static Wireframe.
2.If not already specified, set Hidden Edges to Invisible:
a.Choose Preferences-> Visualization.
b.Select the Visual tab.
c.Expand the Edge Display Settings group.
d.From the Hidden Edges list select Invisible.
e.Click OK.
3.Choose Insert-> Curve from Bodies-> Extract.
4.Click Shadow Outline.
5.Click Cancel to exit the Extract Curve dialog box.
1923003
1923184
Siemens PLM believes that the problem you reported where copying and editing a Turning
Teachmode Profile Move sub-operation with custom member data added to the drive curve
can cause an error when re-selecting the copied sub-operation's drive curve will be resolved
by code changes made to the upcoming release of our software NX 9.0.
1923275
Siemens PLM believes that the problem you reported where number formatting of a parts list
column of type quantity doesn't work when using formula will be resolved by code changes
made to the upcoming release of our software NX 8.5.3 and NX 9.0.
1923439
Siemens PLM believes that the problem you reported where Text doesn't Appear in Metric
Unit for Feature Parameters Dimension will be resolved by code changes made to the
Siemens PLM believes that the problem you reported where splitting a cylindrical geometry
face using the 'insert, trim, divide face' command results in a load imbalance when this same
face is subsequently subject to a uniform pressure load will be resolved by code changes
made to the upcoming release of our software NX 9.0.
1923723
Siemens PLM believes that the problem you reported where the
NXOpen::PDM::FileManagement::ExportFiles() method is not working as expected and
creates a directory only will be resolved by extending the documentation in the upcoming
release of our software NX 9.0.
1923725
Siemens PLM believes that the problem you reported where collector name is not updated
when the workpart is the fem and sim is displayed will be resolved by code changes made to
the upcoming release of our software NX 9.0.
1923844
Siemens PLM believes that the problem you reported where View Creation Wizard : not
possible to set the Top view as default will be resolved by code changes made to the
upcoming release of our software NX 9.0.
1923952
Siemens PLM believes that the problem you reported where fem workpart and sim displayed
material orientation by curve does not work will be resolved by code changes made to the
upcoming release of our software NX 9.0.
1923968
Siemens PLM believes that the problem you reported where "Cut marks by section line do
not have the right line width" will be resolved by code changes made to the upcoming
release of our software NX 9.0 IP9.
1924034
Siemens PLM believes that the problem you reported where the 'insert, mesh, spot weld'
function was not honouring the chosen points, i.e. the spot welds were being created at
points other than those selected, will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1924235
Siemens PLM believes that the problem you reported where Collision Avoidance Command
Removes Previously Created Safe Points will be resolved by code changes made to the
upcoming release of our software NX 9.0.
1924321
The problem where Datasize with boolean operations and performance poss on update is
fixed in NX 9.0 ip7.
Note: Since we added version control that the Pre-NX 9.0 features still behave as before,
please create same new boolean features in NX 9.0 to see the improvement. *** Date &
Time: 21-jan-2013 19:13:39 User: ZHU, JINBIAO (zhuj) ***
1924455
Siemens PLM believes that the problem you reported where NX 8 terminates by JVM conflict
between NXOpen Java and resource bar browser will be resolved by code changes made to
the upcoming release of our software NX 9.0. NX 9.0 will use QT and have all extensions
(including) java disabled. So this situation will not happen anymore. As a workaround in NX
8.5, you can copy all these jar files:
NXOpen.jar
NXOpenRemote.jar
NXOpenRun.jar
NXOpenUF.jar
NXOpenUFRemote.jar
NXOpenUFRun.jar NXOpenUI.jar
NXOpenUIRemote.jar
NXOpenUIRun.jar
VerifyJava.jar
from the UGII directory to the JRE lib\\ext directory (eg. C:\\Program
Files\\Java\\jre7\\lib\\ext). This will ensure that the NXOpen jar files are present when the
JVM is started when a page that uses Java is viewed in the resource bar browser.
1924516
Siemens PLM believes that the problem you reported where the Offset Curve in Face
command returns a wrong result will be resolved by code changes made to the upcoming
release of our software NX 9.0. The fix cannot be backported to NX 8.5 or before since it
causes regressions in those versions. This potentially creates curves that could vary slightly
from the current version and also causes autotest failures. That is the reason the fix was
versioned to NX 9.0 and after. It is going to create a much bigger problem if the fix is
backported.
1924604
Siemens PLM believes that the problem you reported where "Error during function 'Set WCs
to Datum CSYS'" will be resolved by code changes made to the upcoming release of our
software NX 9.0 ip17.
1924608
The problem where wrong visualization of a jt in asm part has been investigated and the
following has been found. The reported PR does not contain sufficient data to reproduce the
problem. Coordinator was notified about the same. Closing it as ID, please reopen when the
data is available and has been uploaded.
1924716
Siemens PLM believes that the problem you reported where Edit sketch dimension will be
resolved by code changes made to the upcoming release of our software NX 9.0 ip10.
1925040
Siemens PLM believes that the problem you reported where Ctrl -Z is undoing two actions
not one will be resolved by code changes made to the upcoming release of our software NX
9.0.
1925204
Siemens PLM believes that the problem you reported where "Section Analysis, doesn't
update after edit sheet solid features" will be resolved by code changes made to the
upcoming release of our software NX 9.0. Section AO updates on Match Edge suppression
in NX 9.0 ip6.
1925288
Siemens PLM believes that the problem you reported where the incorrect version of
LMTOOLS is supplied with NX, will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1925344
Siemens PLM believes that the problem you reported where Drag/Drop von multiple
Operations brings up non understandable Messages will be resolved by code changes made
to the upcoming release of our software NX 9.0.
1925590
Siemens PLM believes that the problem you reported where a Simplified Thread is displayed
incorrectly in a section view in NX Drafting, will be resolved by code changes made to the
upcoming release of our software NX 9.0.
1925647
Siemens PLM believes that the problem you reported where we cannot feature playback on
NX 7.5.5.4 64 bit will be resolved by code changes made to the upcoming release of our
software NX 9.0.
1925806
Siemens PLM believes that the problem you reported where the GD&T leader loses
alignment after editing will be resolved by code changes made to the upcoming release of
our software NX 9.0
Note in the case of this PR data the part is saved in a version where the leader of the GD&T
incorrectly attached to the bottom of a stack of FCFs.
This issue is now fixed. When the FCF is edited the leader will jump to the top of the stack.
This is the correct behavior.
1925858
Siemens PLM believes that the problem you reported where "Temp file created by NX is not
deleted when Export to Trumpf GEO file fails" will be resolved by code changes made to the
upcoming release of our software NX 9.0.
1925991
Siemens PLM believes that the problem you reported where stability of circular blend curve
is missing will be resolved by code changes made to the upcoming release of our software
NX 9.0.
1926298
1926464
Siemens PLM believes that the problem you reported where geometry was changed after
using automatic stitch will be resolved by code changes made to the upcoming release of
our software NX 9.0.
1926467
Siemens PLM believes that the problem you reported where 1D elements orientation
changes after edge splitting will be resolved by code changes made to the upcoming release
of our software NX 9.0.
1926471
Siemens PLM believes that the problem you reported where orientation of 1D elements are
incorrect after using the "Element copy and reflect" command will be resolved by code
changes made to the upcoming release of our software NX 8.5.2.
1926475
Siemens PLM believes that the problem you reported where NPT thread form is not exactly
to standard will be resolved by code changes made to the upcoming release of our software
NX 9.0.
1926756
Siemens PLM believes that the problem you reported where Resize Bend Angle shows error
warnings when face intersections are there will be resolved by code changes made to the
upcoming release of our software NX 9.0.
1926799
1927017
1927055
Siemens PLM believes that the problem you reported where a Motion Joint Limit causes a
solver lockup will be resolved by code changes made to the upcoming release of our
software NX 9.0. In NX 9.0, when articulation locks up, the articulation user interface is not
grayed out, so user can continue to move the mechanism. Also using a bigger step size can
discover joint limit before solver runs into lock up. For example if using step size of 6 you can
get the desired articulation motion.
1927363
Siemens PLM believes that the problem you reported where "in contradiction to the NX
documentation the software does create a duplicate node if you use the Snap Point tool" will
be resolved by documentation changes made to the upcoming release of our software NX
9.0. The caveats regarding the use of Snap Point with 1D Connection were a late addition to
an earlier release of NX to address some issues discovered in testing. The documentation
team has been unable to reproduce the undesirable behavior in NX 9.0. Therefore they have
removed the list of caveats from the documentation.
1927469
Siemens PLM believes that the problem you reported where Adaptive Meshing, model with
voids are meshed on first iteration will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1927492
Siemens PLM believes that the problem you reported where Unable to Open an Assembly
will be resolved by code changes made to the upcoming release of NX 9.0.
1927613
Siemens PLM believes that the problem you reported where German Translation inside
Toolpath Visualization for "Solid" is wrong will be resolved by code changes made to the
upcoming release of our software NX 9.0.
1927632
Siemens PLM believes that the problem you reported where German Translation inside
Accross-Voids for "Follow" Motion Type is wrong will be resolved by code changes made to
the upcoming release of our software NX 9.0.
1927634
Siemens PLM believes that the problem you reported where German Translation inside
Accross-Voids for "Cut" Motion Type is wrong will be resolved by code changes made to the
upcoming release of our software NX 9.0.
1927636
Siemens PLM believes that the problem you reported where German Translation inside
Accross-Voids for "Traverse" Motion Type is wrong will be resolved by code changes made
to the upcoming release of our software NX 9.0.
1927637
Siemens PLM believes that the problem you reported where German Translation inside
Accross-Voids for "Min Traverse Distance" is wrong will be resolved by code changes made
to the upcoming release of our software NX 9.0.
1927746
Siemens PLM believes that the problem you reported where German Translation inside TAB
"Engage" from NCM for "Initial Closed Area" is wrong will be resolved by code changes
made to the upcoming release of our software NX 9.0.
1927923
Siemens PLM believes that the problem you reported where Replace Feature error : Unable
to replace features will be resolved by code changes made to the upcoming release of our
software NX 9.0.
1928008
Siemens PLM believes that the problem you reported where German Translation inside TAB
"Engage" from NCM for "Initial Open Area" is wrong will be resolved by code changes made
to the upcoming release of our software NX 9.0.
1928036
Siemens PLM believes that the problem you reported where German Translation inside TAB
"Engage" from NCM for "Same as Open Area" is wrong will be resolved by code changes
made to the upcoming release of our software NX 9.0.
1928037
Siemens PLM believes that the problem you reported where German Translation inside TAB
"Engage" from NCM for "Same as Closed Area" is wrong will be resolved by code changes
made to the upcoming release of our software NX 9.0.
1928039
Siemens PLM believes that the problem you reported where German Translation inside TAB
"Engage" from NCM for "Same as Initial Open Area" is wrong will be resolved by code
changes made to the upcoming release of our software NX 9.0.
1928176
Siemens PLM believes that the problem you reported where the canned cycle NC-code was
incorrect with respect to non-cutting moves output to the NC-file has been fixed. A new
labeling approach and respective enhancements in the post for canned cycle support in
roughing make it possible that customer-defined non-cutting moves are propagated from the
NX/CAM turning operation to the final resulting NC-code - will be resolved by code changes
1928287
Siemens PLM believes that the problem you reported where the MOM variable
mom_turn_cycle95_machining_type didn't had correct values for a lower turret tool path will
be resolved by code changes made to the upcoming release of our software NX 9.0.
1928499
Siemens PLM believes that the problem you reported where drafting entities that depend on
inherited entity occurrence attributes are not updated when the prototype attributes are
changed will be resolved by code changes made to the upcoming release of our software
NX 9.0. Backporting to earlier MR and MP releases is being considered.
1928672
Siemens PLM believes that the problem you reported where when a new .sim and .fem file
are created directly, i.e. not associated to any geometry part, the 'structural output requests
modeling object' which is auto-created when the solution is created is not honouring the
settings defined within 'file, utilities, customer defaults, simulation, Nastran, solution,
structural output requests' will be resolved by code changes made to the upcoming release
of our software NX 9.0.
1928678
Performance for searching Tools inside NX/CAM over InClass took to long.
1928712
Siemens PLM believes that the problem you reported with a wrong translation of NUMBER
in ANT while in managed mode will be resolved by code changes made to the upcoming
release of our software. The translation of 'Number' has been corrected in NX 9.0.
1928716
Siemens PLM believes that the problem you reported where the CAM Simulation Control
Panel translates 'Current' to 'Strom' erroneously will be resolved by code changes made to
the upcoming release of our software NX 9.0.
1928808
'Customer defaults' settings for Nastran output requests are not being honoured.
1928864
Siemens PLM believes that the problem you reported where legacy surface finish symbols
can't be edited will be resolved by code changes made to the upcoming release of our
software NX 9.0.
1928970
Siemens PLM believes that the problem you reported where show object names shows also
default object names in a sketch will be resolved by code changes made to the upcoming
release of our software NX .09.
1929211
Siemens PLM believes that the problem you reported where result values are different
between 'annotation' and 'identify result' will be resolved by code changes made to the
upcoming release of our software NX 9.0.
1929260
Siemens PLM believes that the problem you reported where the NX Motion application
doesn't clearly manage CSYS vector directions for Point on Curve constraints will be
resolved by code changes made to the upcoming release of our software NX9.0. Here the
details. Fixed in NX 9.0.15 with NX251247. Point on curve icon now displays the tangent (X),
inner normal (Y), binormal (Z) directions along curve. And it can move and rotate during
animation.
1929288
Siemens PLM believes that the problem you reported where Crosshatch lost reference by
view break will be resolved by code changes made to the upcoming release of our software
NX 9.0.
1929336
Siemens PLM believes that the problem you reported where User defined flow cut order
doesn't keep the specified order will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1929399
Siemens PLM believes that the problem you reported where stitch face modifies geometry,
incorrect results will be resolved by code changes made to the upcoming release of our
software NX 9.0.
1929419
Siemens PLM believes that the problem you reported where Problem with the sheet
unbending tool with inclined holes will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1929439
Siemens PLM believes that the problem you reported where NX Sheetmetal: Cannot apply
linear/rect. pattern of mirrored feature will be resolved by code changes made to the
upcoming release of our software NX 9.0 with the following workaround:
1. Delete existing mirror feature and re-create it.
2. Insert - associative copy - pattern feature ( select new created mirror feature for it).
1929580
Siemens PLM believes that the problem you reported where attaching LOAD in a Abaqus
*FREQUENCY step has caused Assertion Failed error will be resolved by code changes
made to the upcoming release of our software NX 9.0.
1929748
1929946
Siemens PLM believes that the problem you reported where a Datum CSYS cannot be
moved from RefSet to Unused Items in Part Navigator will be resolved by code changes
made to the upcoming release of our software NX 9.0.
1930071
1930074
The problem where patch doesn't combine solid with sheet is fixed in release NX 9.0 ip12.
1930103
Siemens PLM believes that the problem you reported where fem Interference/Clearance
check result in error will be resolved by code changes made to the upcoming release of our
software NX 9.0.
1930514
Siemens PLM believes that the problem you reported where it is not possible to 'probe' the
first point of an xy function if function type = spectrum and the x axis type = log, will be
resolved by code changes made to the upcoming release of our software NX 9.0.
1930672
Siemens PLM believes that the problem you reported where cavity mill sometimes causes
NX to hang when a machining pattern exactly fits in a hole will be resolved by code changes
made to the upcoming release of our software NX 9.0.
1930892
Siemens PLM believes that the problem you reported where Mill Form Tools cannot modified
without loosing Libraryreference will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1930951
Shop docs - Unable to show 'Tool Path Time in Minutes' to sensible format.
1931026
Siemens PLM believes that the problem you reported where trimmed Recipe Curves not
usable for offset and mirror curve will be resolved by code changes made to the upcoming
release of our software NX 9.0 ip12.
1931127
Siemens PLM believes that the problem you reported where reference only components
behaved incorrectly within a certain assembly structure will be resolved by code changes
made to the upcoming release of our software NX 9.0.
1931322
Siemens PLM believes that the problem you reported where there were problems
constraining the sketch will be resolved by code changes made to the upcoming release of
our software NX 9.0.
1931539
Siemens PLM believes that the problem you reported where he tool path is not generated
correctly after replacing the component will be resolved by code changes made to the
upcoming release of our software NX 9.0.
1931548
Siemens PLM believes that the problem you reported where "Unable flatten solid with a SB
Base Contour Flange in combi with SB Flanges" will be resolved by code changes made to
the upcoming release of our software NX 9.0 ip11.
1931671
Siemens PLM believes that the problem you reported where Clone assembly failed - naming
rules incorrect will be resolved by code changes made to the upcoming release of our
software NX 9.0 ip13.
1931824
1931849
Siemens PLM believes that the problem you reported where subcases are missing when
reading in specific bulk data file will be resolved by code changes made to the upcoming
release of our software NX 9.0. The problem turned out to be the parsing of a NASTRAN
solver file that has as a first line SUBCASE. As far as we know the issue has been around
for many releases but importing such a file is not common. Of course this file cannot be
solved by NASTRAN as is since it has no executive control section with the mandatory SOL
card. However, the parser should be smart enough to extract the relevant data and populate
NX. The fix was implemented in NX 9.0. As a workaround in prior releases one can add the
following line at the beginning of the file and all the SUBCASES should import and populate
the navigator.
1931956
1932269
Siemens PLM believes that the problem you reported where German Translation in Cutting
Paramaters - Corners called "Roll Around" is wrong will be resolved by code changes made
to the upcoming release of our software NX 9.0.
1932270
Siemens PLM believes that the problem you reported where CAM: The Translation for
"Retrieve Tool from Library" in German is wrong will be resolved by code changes made to
the upcoming release of our software NX 9.0.
1932315
Siemens PLM believes that the problem you reported where a patch creates strange faces
will be resolved by code changes made to the upcoming release of our software NX 9.0.
1932449
Siemens PLM believes that the problem you reported where Finish_Pass could not be set in
the MKE when Surface Contouring will be resolved by code changes made to the upcoming
release of our software NX 8.5.3 and NX 9.0. Earlier delivery upon request is possible since
this change is in a base customization xml file only. The parameter name is
DPMBD_Finish_Pass. To have this parameter available, the xml source file must be Loaded
with Update, with the new customization_base.xml in place.
1932567
Siemens PLM believes that the problem you reported where add base view wrong result
after drag and drop from palette, will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1932591
Siemens PLM believes that the problem you reported where it was not possible to generate
a volumetric mesh of uniform element size will be resolved by code changes made to the
upcoming release of our software NX 9.0.
1932613
Siemens PLM believes that the problem you reported where Electrode Design Blank UI
doesn't change expressions with lower case Materials will be resolved by code changes
made to the upcoming release of our software NX 9.0.
1932768
Siemens PLM believes that the problem you reported where Edits on Split body features
changes different Materials to one Material will be resolved by code changes made to the
upcoming release of our software P9.0/phase 15 The problem where Edits on Split body
features changes different Materials to one Material is fixed in release NX 9.0 ip15.
1932784
Siemens PLM believes that the problem you reported where the Electrode Customer Default
MW_EW_DRAFT_TEMPLATE_PREFIX is ignored as of NX 8 will be resolved by code
changes made to the upcoming release of our software NX 9.0 as follows:
Drawing templates are filtered by the defined prefix string, if there is no template found, all
templates will be retrieved.
1932790
Siemens PLM believes that the problem you reported where loads and constraints loose
associativity after a mesh update will be resolved by code changes made to the upcoming
release of our software NX 9.0. Several fixes that went to NX 9.0 makes the behavior better
in terms of making the face tracking object survive the CAE model update. However, there
are limitations in the tracking mechanism and still a couple of faces will loose load/boundary
constraints (LBC). The workaround for these couple faces is to edit the LBC from where this
face is missing and "edit" the LBC to add the face back.
1932927
Siemens PLM believes that the problem you reported where "NX 8.5 error with delete body
and reusable pocket" will be resolved by code changes made to the upcoming release of our
software NX 9.0.
1933014
Siemens PLM believes that the problem you reported where merging duplicate nodes
associated with a reflected mesh gave a 'mixed node types' error and some nodes were
subsequently left un-merged will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1933100
Siemens PLM believes that the problem you reported where ug_mqc_askMemberViewClip
and UF_DRAW_ask_view_borders ignore View Breaks will be resolved by code changes
made to the upcoming release of our software NX 9.0.
1933387
Siemens PLM believes that the problem you reported where "Description of 'Remove
Gashes' is missing in NX 8 documentation" will be resolved by code changes made to the
upcoming release of our software NX 9.0.
1933394
Siemens PLM believes that the problem you reported where Point created with a rectangular
offset loses associativy will be resolved by code changes made to the upcoming release of
our software, in NX 9.0 ip12.
1933574
Siemens PLM believes that the problem you reported where wrong memory in NX CAE
setting for NX Nastran will not solve without information will be resolved by code changes
made to the upcoming release of our software NX 9.0.
1933575
Siemens PLM believes that the problem you reported where stress results in material
coordinate system are incorrect will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1933595
Siemens PLM believes that the problem you reported where "Mold Wizard License does not
activate functions in Easy Fill module" will be explained by following closing statement : The
documentation for Flow Analysis Results erroneously stated that Air Trap and Welding Line
results were available to all users. This has been corrected in the NX 9.0 library. The only
option available is Melt Front Time, which can be shown as an animation.
1933670
Siemens PLM believes that the problem you reported where extracted region will not show
handle direction after editing its source geometry will be resolved by code changes made to
the upcoming release of our software NX 9.0 ip13.
1933826
Siemens PLM believes that the problem you reported where Zlevel_Profile, Extend at Edge
fails to create correct tool path will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1934039
Siemens PLM believes that the problem you reported where Using "Tilt Tool Axis" over a
Flowcut Operation let the System took a very long Time will be resolved by code changes
made to the upcoming release of our software NX 9.0.
1934077
The names of coordinate system in absolute 0,0,0 get lost name after translation.
1934184
Siemens PLM believes that the problem you reported where "Mirror assembly gives
unexpected results" will be resolved by code changes made to the upcoming release of our
software NX 9.0. Selection of the optimum reposition solution has been improved. In some
cases it may happen that the optimum solution is chosen to be solutions 1 - 3, whereas
previously the optimum (default) solution was 4 - 6. In some situations, however, the design
may find two or more reposition solutions to be equally appropriate. With the current design,
there is some chance that the best reposition solution is not chosen as the default. In these
situations, the reposition solution must be manually changed to the one that is most
appropriate.
1934203
1934242
Siemens PLM believes that the problem you reported where error during import of ansys
model due to ascii setting will be resolved by code changes made to the upcoming release
of our software NX 9.0.
1934411
Siemens PLM believes that the problem you reported where ug_import ignores mapping of
db_part_type will be resolved by code changes made to the upcoming release of our
software NX 9.0.
1934524
Siemens PLM believes that the problem you reported where buckling with pre-load and
contact wrongly implemented in NX will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1934564
Siemens PLM believes that the problem you reported where "Problem with Reattach" will be
resolved by code changes made to the upcoming release of our software NX 9.0 ip17.
1934725
Siemens PLM believes that the problem you reported where an error occurs after generating
the tool path of a copied operation will be resolved by code changes made to the upcoming
release of our software NX 9.0. The tool path of some features were not generated because
the Hole Depth Smart Point failed to map to other feature. Note that these features are
"Tagged" features created from a cylindrical face. This is indicated in the Machining Feature
Navigator, under "Source" column. It is recommended to use the "Depth" value for
machining features created from tagged cylindrical faces. Refer to the Documentation in
Home->Feature-based Machining->Alternate methods using Knowledge Fusion->
Siemens PLM believes that the problem you reported where the Normal cutout is not
working correctly, will be resolved by code changes made to the upcoming release of our
software NX 9.0 Besides this, also an advice on the work method: The better way to cut
would be to Unbend, do the Normal Cutout and Rebend. User can also use Extrude feature
to achieve desired result.
1935227
Siemens PLM believes that the problem you reported where correct listing device is not used
to output feature information will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1935297
Siemens PLM believes that the problem you reported where placing customer symbol as
PMI Custum symbol failed will be resolved by code changes made to the upcoming release
of our software NX 9.0 ip13. This PR demonstrates the issue where NX hangs while placing
the customer provided custom symbol [with "Exclude Custom Symbols From Reading
Direction Update" customer default option tuned off]. This issue is fixed in NX 9.0 by
introducing a new mechanism. The fix will not be back ported to previous releases. A
compressed avi file (fixed_issue.7z)is also uploaded in the prdata tool showing the workflow
is fixed. However development team still recommends turning on "Exclude Custom Symbols
From Reading Direction Update" customer default option is the correct choice.
1935299
Siemens PLM believes that the problem you reported where "RCP not at the end of a
electrical routing spline" will be resolved by code changes made to the upcoming release of
our software NX 9.0 ip17.
1935401
1935579
Siemens PLM believes that the problem you reported where NX gives an Internal error for
clearance analysis due to asm level features of a SE asm imported, will be resolved by code
changes made to the upcoming release of our software NX 9.0.
1935838
Siemens PLM believes that the problem you reported where Wall Thickness analyis shows
wrong result will be resolved by code changes made to the upcoming release of our
software. The fix has been submitted to NX 9.0 ip12.
1935842
Siemens PLM believes that the problem you reported where NX was crashing while cycling
through CAM objects is fixed in release NX 9.0.
1935843
Siemens PLM believes that the problem you reported where "Reference Set 'Edit Properties' opens wrong dialogue (Class selection)" is fixed in release NX 9.0 ip15.
1935844
Siemens PLM believes that the problem you reported where attributes of model views are
not shown in the column of the part navigator will be resolved by code changes made to the
upcoming release of our software NX 9.0.
1935887
BSP Text doesn't Appear in Metric Unit for Feature Parameters Dimension.
1935888
Siemens PLM believes that the problem you reported where Screw clearance hole - fit
changes when the screw size is changed will be resolved by code changes made to the
upcoming release of our software NX 9.0. User interface related changes can not be put in
MP to NX 8 for.
1936078
Siemens PLM believes that the problem you reported where Manually changed Part
Boundary from Planar Mill Operation automatically changed after copy/paste will be resolved
by code changes made to the upcoming release of our software NX 9.0 and NX 8.5.1.3 MP3
1936152
Siemens PLM believes that the problem you reported where Check-Mate does not indicate
problematic faces in thicken function will be resolved by code changes made to the
upcoming release of our software NX 9.0.
1936153
Siemens PLM believes that the problem you reported where type filter does not work in
boolean operations using bodies in group body role will be resolved by code changes made
to the upcoming release of our software NX 9.0.
1936158
Siemens PLM believes that the problem you reported: Hole Milling - diameter for Helix documentation enhancement will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1936173
Siemens PLM believes that the problem you reported where there were different results from
the 'ATAN' function in ISV-CSE and in the Heidenhain DATA will be resolved by code
changes made to the upcoming release of our software NX 9.0
1936206
Siemens PLM believes that the problem you reported where UPDATE/DELETE has gone
through too many iterations will be resolved by code changes made to the upcoming release
of our software NX 9.0 In this special case, the replacement part seems to have reordered
the "Fix at Time Stamp feature in front of the feature of the parent face of linked face(70).
We have added special code to correct the linked feature in such a case to avoid dead loop
of an update. The fix is only added in NX 9.0 ip13 as this problem has rarely occurred, and
there is work around. The following is a workaround solution:
Solution 1. Please reorder Edge Blend(46) after the last Chamfer feature in part
M_9693_2336_02_A.prt before doing the replace.
Solution 2. Edit Linked Face(70) in the assembly part and turn off "Fix at Time Stamp" option
before doing the replace as it really does not make a difference to this linked face feature in
this case.
1936221
Siemens PLM believes that the problem you reported where the function
UF_UGMGR_convert_file_name_to_cli() always returns '0' will be resolved by code changes
made to the upcoming release of our software NX 9.0.
1936313
Siemens PLM believes that the problem you reported where Motion Simulation Geometry
missing will be resolved by code changes made to the upcoming release of our software NX
9.0.
1936417
Siemens PLM believes that the problem you reported where the contents of a group are
removed following an unrelated subsequent operation will be resolved by code changes
made to the upcoming release of our software NX 9.0.
1936429
1936432
Siemens PLM believes that the problem you reported where feature history does not run thru
to end after change made to certain features will be resolved by code changes made to the
upcoming release of our software NX 9.0.
1936450
Siemens PLM believes that the problem you reported where stacked ID symbols moved
after moving the view they were associated to will be resolved by code changes made to the
upcoming release of our software NX 9.0.
1936462
Siemens PLM believes that the problem that you reported where the group 'boolean'
operators are no longer available as a 'rhmb' option when highlighting multiple groups
associated with the constituent fems from the simulation navigator in the context of an
assembly fem in NX 8.5 will be resolved by code changes made to the upcoming release of
our software NX 9.0.
1936524
Siemens PLM believes that the problem you reported where tool number with eight
characters and begins with a "1" simulation is crashing will be resolved by code changes
made to the upcoming release of our software NX 9.0.
1936536
Siemens PLM believes that the problem you reported where stitching edges causes a
corruption in the polygon geometry will be resolved by code changes made to the upcoming
release of our software NX 9.0. The fix might also go into a NX 8.5.x release, but we cannot
confirm this yet. Development placed code in NX 9.0 so that the "CAE model consistency"
operator would not run into data corruption and would be able to resurrect the CAE model by
removing the offending polygon body.
1936542
Siemens PLM believes that the problem you reported where unable to create body will be
resolved by code changes made to the upcoming release of our software NX 9.0 ip15.
1936556
"Siemens PLM believes that the problem you reported where DEFORM card is not written
out properly when it is referenced by more than one subcase will be resolved by code
changes made to the upcoming release of our software NX 9.0".
1936569
Siemens PLM believes that the problem you reported where Planar Profile contour with
negative stock returns "could not be made safely" will be resolved by code changes made to
the upcoming release of our software NX 9.0.
1936830
Siemens PLM believes that the problem you reported where the hidden section line in
drafting was not visible for showing will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1936990
Siemens PLM believes that the problem you reported where Weld Assistants ignores Reuse
Deleted ID will be resolved by code changes made to the upcoming release of our software
NX 9.0 ip17. The problem where Weld Assistants ignores Reuse Deleted ID is fixed in
release NX9.0 ip17.
1937109
Siemens PLM believes that the problem you reported where Pattern Feature and Blend all
instances won't create blend on non planar surface will be resolved by code changes made
to the upcoming release of our software NX 9.0.
1937125
Siemens PLM believes that the problem you reported where UDF direction flipped after
mirroring the feature will be resolved by code changes made to the upcoming release of our
software P9.0/phase 11. The Mirror Feature operation reported in the PR part is successful
in NX9 IP11 (with delta). The Datum Axis in the mirrored UDF is created in the correct
direction after the part is updated, or on recreating the Mirror Feature.
1937165
Siemens PLM believes that the problem you reported where the sketch becomes overconstrained after adding a fillet will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1937166
Siemens PLM believes that the problem you reported where the fully constrained sketch
becomes over-constrained after deleting a dimension will be resolved by code changes
made to the upcoming release of our software NX 9.0.
1937173
Fully constrained sketch becomes over constrained after adding a new line - case1.
1937182
Siemens PLM believes that the problem you reported where deleting the last UDO linked to
instance/component gives error will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1937188
Siemens PLM believes that the problem you reported where opening Solid Works Part in NX
8.5 gives insufficient result will be resolved by code changes made to the upcoming release
of our software NX 9.0.
1937229
Associated Help Topic "Assembly Load option" does not work via F1 key.
1937241
Siemens PLM believes that the problem you reported where the fully constrained sketch
becomes over constrained after adding a new line will be resolved by code changes made to
the upcoming release of our software NX 9.0.
1937254
The problem reported in the PR is fixed in Modeling_nx9.196 and for NX 9.0 ip13. Note that
the parts in the "Test" directory of the PR data have a different configuration than the
"nj_*.prt" parts. The parts in the "Test" directory have position dimensions on the Sketch, not
dimensions on the point inside the Sketch. The PR#1937569 track the other problem and is
not resolved.
1937260
Siemens PLM believes that the problem you reported where "NX freezes with file new
because of customer defaults" will be fixed in release NX 9.0. If the part name versioning
rules that have been set conflict with our system auto-generated part name, we display an
alert to the user that the part name couldn't be generated and in such cases, user will need
to manually enter the part name which doesn't conflict with the set rules.
1937322
Siemens PLM believes that the problem you reported where beam section orientation
changes when rotating will be resolved by code changes made to the upcoming release of
our software NX 9.0.
1937349
Siemens PLM believes that the problem you reported where When drawing with explosion
will be exported to PDF an display error occurs will be resolved by code changes made to
the upcoming release of our software. The problem appears to be fixed in the SDI library in
NX 9.0.
1937358
1937369
Siemens PLM believes that the problem you reported where NX hangs when create new file
using custom template will be resolved by code changes made to the upcoming release of
our software NX 9.0.
1937455
Siemens PLM believes that the problem you reported where a customized crosshatch
definition file is not remembered in the Crosshatch dialog, will be resolved by code changes
made to the upcoming release of our software NX 9.0.
1937473
Siemens PLM believes that the problem you reported where Ascii Tool Library retrieval
location is not consistent will be resolved by code changes made to the upcoming release of
our software NX 9.0.
1937509
Siemens PLM believes that the problem you reported where "Flat Pattern fails on rolled face
with Tab" will be resolved by code changes made to the upcoming release of our software
NX 9.0.
1937660
Siemens PLM believes that the problem you reported where documentation is missing for
installing the NX Ship template libraries will be resolved by code changes made to the
upcoming release of our software NX 9.0. Most of the steps to import ship template parts
were already in the NX 8.5 Help under Shipbuilding > Customization > Import ship libraries
into Teamcenter. However, this topic was renamed to make it easier to find. More detail was
also added to better match the information provided in the Word document in the NXSHIP
install folder. The new topic is in the NX 9.0 Help under CAD > Shipbuilding > Installing
templates and customizing the Ship Structure applications > Install ship template parts.
1937805
Siemens PLM believes that the problem you reported where "wrong band lines on flat
pattern view" will be resolved by code changes made to the upcoming release of our
software NX 9.0 IP12. NX 9.0 will be ready for customer download on 01-Oct-2013.
1937810
Siemens PLM believes that the problem you reported where "Flat Pattern ignores Inner
Corner Treatment" will be resolved by code changes made to the upcoming release of our
software P9.0/phase 12.
1937841
Siemens PLM believes that the problem you reported where spatial temperature distribution
only shows up on subset of the defined faces will be resolved by code changes made to the
upcoming release of our software NX 9.0.
1937953
Siemens PLM believes that the problem you reported where "Thru face does not intersect
path of the tool" will be resolved by code changes made to the upcoming release of our
software P9.0/phase 16.
1938016
Siemens PLM believes that the problem you reported where there is a mismatch between
on-line documentation and command help for ugmanager_refile, will be resolved by code
changes made to the upcoming release of our software NX 9.0.
1938056
Siemens PLM believes that the problem you reported where "Automatic Positioning" for
Turning Blank cannot Display the Blank without Reference/Target Point will be resolved by
code changes made to the upcoming release of our software NX 9.0.
1938291
Siemens PLM believes that the problem you reported where flowcut does not cut small steep
regions with steep cut direction with large hookup distance will be resolved by code changes
made to the upcoming release of our software NX 9.0.
1938305
Siemens PLM believes that the problem you reported where flowcut does not identify small
steep regions when hookup distance is large will be resolved by code changes made to the
upcoming release of our software NX 9.0.
1938361
Siemens PLM believes that the problem you reported where microposition in curve on
surface does not work as it should will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1938364
Siemens PLM believes that the problem you reported with deleting faces will be resolved by
code changes made to the upcoming release of our software NX 9.0.
1938424
Siemens PLM believes that the problem you reported where The geometry in the sketch is
not fully constrained after migrate to NX 8.5 will be resolved by code changes made to the
upcoming release of our software P9.0/phase 17. The problem where sketch goes conflicting
when adding two dimensions has been fixed in NX 9.0 ip17.
1938510
Siemens PLM believes that the problem you reported where "Allow Save As Non-Master to a
Different Item" customer defaults conflict, is fixed in release NX 9.0. NX 9.0 is planned for
Siemens PLM believes that the problem you reported where feature update fails in NX8022
will be resolved by code changes made to the upcoming release of our software NX 9.0.
1938574
Siemens PLM believes that the problem you reported where replace component does not
work for API anymore as before will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1938608
Siemens PLM believes that the problem you reported where reordering of Coordinate
System will be resolved by code changes made to the upcoming release of our software NX
9.0 ip16.
1938861
Siemens PLM believes that the problem you reported where bridge curve object selection is
not working as expected will be resolved by code changes made to the upcoming release of
our software NX 9.0.
1939010
1939040
Siemens PLM believes that the problem you reported where deformable part can not add as
a component will be resolved by code changes made to the upcoming release of our
software NX 9.0 ip14. The problem where flex instantiation is not possible if deform definition
has instance geometry as member feature is fixed in NX 9.0 ip14 and NX 8.5.3 ip1, under
environment variable UGII_ALLOW_FLEX_WITH_INST_GEOM. It is limitation of deform
that it cannot handle geometry created by instance geometry features. Hence instance
geometry is not supported by deform and creation of deform definitions and deform
instantiations is not allowed with instance geometry as a member feature. To allow use of
legacy parts with such deform definitions, flex instantiation is now allowed under
environment variable UGII_ALLOW_FLEX_WITH_INST_GEOM. set
UGII_ALLOW_FLEX_WITH_INST_GEOM=1 will enable this variable and user can perform
instantiation of existing deformable parts. The creation of new deform definitions with
instance geometry is still blocked.
1939171
Siemens PLM believes that the problem you reported where CAM: Tracking point does not
mach the correct Position when Contact Data is ON will be resolved by code changes made
to the upcoming release of our software NX 9.0.
1939176
Siemens PLM believes that the problem you reported where "Sketch Dimensions and
Curves not visible in Direct Sketch mode" will be resolved by code changes made to the
upcoming release of our software NX 9.0. When editing a sketch in an invisible layer, we will
make that layer as work layer. This change has been made to NX 9.0. With this change, the
curves will be visible when we edit the sketch. The dimensions have an additional
complication in this part. They are hidden in two ways - one: they are on invisible layer. two:
on top of that, they are also blanked. When editing a sketch in Task Env, we will display all
blanked dimensions and curves. When editing a sketch in Direct Sketch, we will do this only
when all of sketch is blanked/hidden. Since only dimensions (and not rest of the sketch) is
hidden, we don't show (i.e. unblank) the dimensions. To fix the problem, the user must pick
the sketch MB3 -> Show on the sketch and then go back to Layer Settings and turn off layer
17. This will ensure that dimensions are hidden in only one way - via invisible layer. They will
no longer be blanked. Editing the sketch now will display the curves and dimensions.
1939256
Siemens PLM believes that problem where constraints failed to re-associate to like-named
geometry in a replacement subassembly after a Replace Component operation is fixed in NX
9.0. NX 9.0 is planned ready for customer download 1st of Oct 2013.
1939274
Siemens PLM believes that the problem you reported where ListingWindow::WriteLine()
output is buffered by about 50 lines always will be resolved by code changes made to the
upcoming release of our software NX 9.0.
1939708
Siemens PLM believes that the problem you reported where system response time not
acceptable when cursor is moved across geometry will be resolved by code changes made
to the upcoming release of our software P9.0/phase 13 The problem where browsing
demonstrated slow performance due to excessive processing for occlusion testing (to
exclude hidden wireframe objects from selection) is resolved in release NX 9.0.
1939760
Siemens PLM believes that the problem you reported where leader change from Flag to
Plain after placing a Surface Finish Symbol. will be resolved by code changes made to the
upcoming release of our software NX 9.0 ip15 The problem where the leader type changes
back to plain after placing a flag leader is fixed in NX 9.0.
1939940
Siemens PLM believes that the problem you reported where Convex or box collision body
changes the result will be resolved by code changes made to the upcoming release of our
software NX 9.0.
1940226
Siemens PLM believes that the problem you reported where Launching a BlockStyler
Specify Point block from a UIStyler button terminates NX will be resolved by code changes
made to the upcoming release of our software NX 9.0.
1940372
Siemens PLM believes that the problem you reported where "Copy to Layer" did not copy
the attributes of faces and edges will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1940583
Siemens PLM believes that the problem you reported where Sketch complains about
conflicting contraints/dimensions as of NX 8 will be resolved by code changes made to the
upcoming release of our software NX 9.0.
1940640
1940826
Siemens PLM believes that the problem you reported where Global Shaping feature cause
NX 6 part to fail open in NX 7.5 will be resolved by code changes made to the upcoming
release of our software NX 9.0. To make the failing Global Shaping feature to work to its full
extent when the part been opened in NX 9.0, you need to make the Global Shaping feature
current feature, and select the missing Region to Deform, or Region Limit Curve1 and
Region Limit Curve 2, to update the feature correctly. So, you need to know what curves
were used when the feature was created in NX 6.
1940910
Siemens PLM believes that the problem you reported where the boolean Unite operation
fails with a specific Tool/Target sequence will be resolved by code changes made to the
upcoming release of our software NX 9.0.
1941004
Siemens PLM believes that the problem you reported where Assembly containing drawing
views could not be exported to step will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1941056
Siemens PLM believes that the problem you reported where NX cannot change Bend
Radius of split body will be resolved by code changes made to the upcoming release of our
software NX9.0.
1941094
1941214
1941307
Siemens PLM believes that the problem you reported where you cannot un-expand an
expanded view after Copy to Clipboard if Save JT-Option is on will be resolved by code
changes made to the upcoming release of our software NX 9.0.
1941346
1941347
Siemens PLM believes that the problem you reported where Some (new created) objects of
UDF create NOT on the wanted layer will be resolved by code changes made to the
upcoming release of our software. There are two issues with this PR. One is with the curves,
and the other one is with the bodies. The development has submitted the fix for the curve
issue where the curves are added to the wrong layer. The body issue is tracked by a
separate PR6902696.
1941373
Siemens PLM believes that the problem you reported where Changing Toolnumber flagged
all inherited Operation as regenerated will be resolved by code changes made to the
upcoming release of our software NX 9.0.
1941582
Siemens PLM believes that the problem you reported where Cross Hatching loses
associativity in exact Pre 8.5 views with partial loading on will be resolved by code changes
made to the upcoming release of our software NX 9.0.
1941838
Siemens PLM believes that the problem you reported where "Edit Explosion, Components
remains highlighted" will be resolved by code changes made to the upcoming release of our
software NX 9.0 ip16.
1941853
Siemens PLM believes that the problem you reported where "The deletion from a Extract is
not possible" will be resolved by code changes made to the upcoming release of our
software NX 9.0 ip15.
1941970
Different behavior between NX 7.5 and NX 8.5 during the edit Sketch.
1942000
1942147
Siemens PLM believes that the problem you reported where Update error Offset Surface
and playback fails will be resolved by code changes made to the upcoming release of our
software NX 9.0 ip17. The problem where Update error Offset Surface and playback fails is
fixed in release NX 9.0. Note:Please remove the unparameterized feature(948) since it's not
available. There are two Update Warnings.
1942196
Siemens PLM believes that the problem you reported where Attributes in NX 7.5 created are
lost in NX 8.5 will be resolved by code changes made to the upcoming release of our
software NX 9.0.
1942211
1942232
Siemens PLM believes that the problem you reported where system crash in NX 8.5 when
adding a curve to a Flat Pattern feature will be resolved by code changes made to the
upcoming release of our software NX 9.0.
1942300
1942514
Siemens PLM believes that the problem you reported where geometric optimization update
fails, although cad-cae models updates fine will be resolved by code changes made to the
1942677
1942688
Siemens PLM believes that the problem you reported where section line is positioned
incorrect will be resolved by code changes made to the upcoming release of our software
NX 9.0.
1942725
1942870
Siemens PLM believes that the problem you reported where the values displayed on a
contour plot of response simulation rms acceleration results are a factor of 1000 too high
when the fea model has been solved using the N/m/kg units system rather that the default
mN/mm/kg units system will be resolved by code changes made to the upcoming release of
our software NX9.0.
1942934
Siemens PLM believes that the problem you reported where "Flat Pattern wrong whilst using
Mirror Body feature" will be resolved by code changes made to the upcoming release of our
software NX 9.0 The fixes are versioned. User should create new mirror body & unite feature
in NX 9.0. Refer "Rollentisch_ktr_pts_template_flat_pattern_nx9.prt".
1943023
Siemens PLM believes that the problem you reported where UF_PLOT_print throws internal
error code 65 after UF_PLOT_add_job_to_plot_layout will be resolved by code changes
made to the upcoming release of our software NX 9.0.
1943157
Siemens PLM believes that the problem you reported where "Perpendicular dimension from
circle center to Datum Axis fails in Sketcher" will be resolved by code changes made to the
upcoming release of our software NX 9.0.
1943194
Siemens PLM believes that the problem you reported where "PMI's in Vis can't control
visibilty of layers from NX" will be resolved by code changes made to the upcoming release
of our software NX 9.0 .
1943316
1943548
1943570
Siemens PLM believes that the problem you reported where DLLs are not loaded in external
mode from STARTUP but UDO directory only will be resolved by code changes made to the
upcoming release of our software NX 9.0. The NX 9.0 NX Open Programmers Guide has
been updated in NX 9.0 to clarify that shared libraries for UDO's in an external program need
to be in the UDO directory not the Startup directory.
1943682
Siemens PLM believes that the problem you reported where Teach Mode Operations
changed the Geometry from NX 7.5 to NX 8.5 (from Circle to B-Spline) will be resolved by
code changes made to the upcoming release of our software NX 9.0
1943851
Siemens PLM believes that the problem you reported where Analyse - measure face fails
will be resolved by code changes made to the upcoming release of our software NX 9.0
ip18.
1944056
Siemens PLM believes that the problem you reported where the german translation from
Dialog Options was wrong will be resolved by code changes made to the upcoming release
of our software NX 9.0.
1944069
Siemens PLM believes that the problem you reported where Trochoidal Parameter creates
not useful Toolpathes without any Information to User will be resolved by code changes
made to the upcoming release of our software NX 9.0. A warning message is now generated
when the perimeter of the cut region can not be made smooth.
1944121
1944122
Siemens PLM believes that the problem you reported where the elements associated with a
specific material are not highlighted on the screen when the corresponding material is
highlighted within the 'manage materials' form when the setting: preferences, selection,
highlight selection on rollover = off has been invoked will be resolved by code changes made
to the upcoming release of our software NX 9.0.
1944143
Siemens PLM believes that the problem you reported where 'connections' created in the
context of an assembly fem were not being updated following a modification to one of the
component .fem files will be resolved by code changes made to the upcoming release of our
software NX 9.0.
1944434
1944517
Siemens PLM believes that the problem you reported where the erroneous parsing of the
second field of the NLPCI card will be resolved by code changes made to the upcoming
release of our software NX 8.5.3 and NX 9.0.0.
1944518
1944543
Siemens PLM believes that the problem you reported where CBUSH1D SPRING2GROUND:
"Result file is in wrong format" when open op2 file, will be resolved by code changes made
to the upcoming release of our software NX 9.0.
1944595
1944683
Groups in session with box zones are not saved correctly in bookmarks.
1945025
Siemens PLM believes that the problem you reported where ""Bolt Circle Centerline" doesn't
work correctly with Extruded holes" will be resolved by code changes made to the upcoming
release of our software NX 9.0, for new centerlines created after NX 9.0.
1945045
Siemens PLM believes that the problem you reported where NX crashed after a node merge
operation will be resolved by code changes made to the upcoming release of our software
NX 9.0.
1945182
Siemens PLM believes that the problem you reported where WAVE link does not transfer
geometry name will be resolved by code changes made to the upcoming release of our
software. The problem where the inheritance of geometry name for linked body feature is
incorrect is fixed in NX 9.0.
1945394
Siemens PLM believes that the problem you reported where it is not possible to screen area
select multiple nodes when using the 'duplicate nodes' model check function in conjunction
with the 'view, section, clip work section' command (type = two parallel planes) will be
resolved by code changes made to the upcoming release of our software NX 9.0.
1945661
Large distance between formula dimension and sketch line in bottom view.
1945858
Siemens PLM believes that the problem you reported where Node Drag operation does not
align midside nodes of shell elements will be resolved by code changes made to the
upcoming release of our software NX 9.0.
1946019
1946072
Siemens PLM believes that the problem you reported where the stress-strain curve is not
being written to the MatML library file will be resolved by code changes made to the
upcoming release of our software NX 9.0.
1946633
Siemens PLM believes that the problem you reported where NX-SOA-Function
listAlternateIdDisplayRules tooks a long time will be resolved by code changes made to the
upcoming release of our software NX 9.0.
1946856
Siemens PLM believes that the problem you reported where playback error on face blend in
NX 8.5.1.3 will be resolved by code changes made to the upcoming release of our software
P9.0/phase 17.
1946960
1947011
Siemens PLM believes that the problem you reported where Documentation for
SinumerikPL_Cycles.cyc is Missing is fixed with NX 9.0. A statement was added to the help:
"Supported Sinumerik cycles are documented in Chapter 10 of the file
Working_with_OOTB_MACH_Simulation_Examples.pdf in your
...\\MACH\\samples\c_simulation_samples."
1947030
Siemens PLM believes that the problem you reported where Journal Automation records a
method ResultMeasureCollection.Find() rather than FindObject() will be resolved by code
changes made to the upcoming release of our software NX 9.0.
1947034
Siemens PLM believes that the problem you reported where CAE.ResultParameters
documentation needs correction for obsolete methods will be resolved by code changes
made to the upcoming release of our software NX 9.0.
1947035
Siemens PLM believes that the problem you reported where drafting dual dimension settings
for thickness dimensions is grayed out will be resolved by code changes made to the
upcoming release of our software NX 9.0.
1947201
Siemens PLM believes that the problem you reported where flat solid will not flatten curves if
closed loop with curve on bend line will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1947321
Siemens PLM believes that the problem you reported where worng translation under SMD
Flange in length properties will be resolved by code changes made to the upcoming release
of our software NX 9.0.
1947451
1947482
Siemens PLM believes that the problem you reported where Circular Pattern feature
incomplete and fails update will be resolved by code changes made to the upcoming release
of our software NX 9.0.
1947506
Siemens PLM believes that the problem you reported where documentation is missing for
the exclamation mark in assemblies will be resolved by code changes made to the upcoming
release of our software NX 9.0.
1947524
Siemens PLM believes that the problem you reported where PMI dimension does not update
after changes will be resolved by code changes made to the upcoming release of our
software NX 9.0.
1947757
Wrong German translation in Export PDF dialog box for value Draft is named Skizz.
1948157
Siemens PLM believes that the problem you reported where "no warning appears when
modifying RBE3 leg nodes and accidentally including source node" will be resolved by code
changes made to the upcoming release of our software NX 9.0.
1948201
Open part fails for "Internal error" and "incorrect objects for this operation".
1948268
Siemens PLM believes that the problem you reported where Replace Component replaces
all JT occurrences using "Maintain Relationships" will be resolved by code changes made to
the upcoming release of our software NX 9.0.
1948359
Siemens PLM believes that the problem you reported where the cutting shape of a flipped
turning tool is wrong during material removal in the synchronize editor will be resolved by
code changes made to the upcoming release of our software NX 9.0.
1948599
1948633
1948660
1949102
Siemens PLM believes that the problem you reported where "NX hangs when writing the
Nastran deck file" will be resolved by code changes made to the upcoming release of our
software NX 9.0.
1949384
Siemens PLM believes that the problem you reported where color face button appeared in
modeling and later was removed when entering Manufacturing or any other application will
be resolved by code changes made to the upcoming release of our software NX 9.0 The
button should not have been available initially in Modeling.
1949919
Siemens PLM believes that the problem you reported where " NX hangs during group
creation in Edit FE in context mode" will be resolved by code changes made to the upcoming
1950302
Siemens PLM believes that the problem you reported where driving Dimension in Drafting
Sketch will be resolved by code changes made to the upcoming release of our software NX
9.0. Now driving dimension can be created from the center of an arc which is out of sketch
plane. But dimension cannot be create from the out of sketch plane arc itself.
1950436
Siemens PLM believes that the problem you reported where the NXOpen property
NXOpen.Annotations.Associativity.PickPoint returns a wrong location as of NX 8 will be
resolved by code changes made to the upcoming release of our software NX 9.0.
1952022
Siemens PLM believes that the problem you reported where "Closed Corner looks different
in Flat Pattern if the body is mirrored" will be resolved by code changes made to the
upcoming release of our software NX 9.0. The problem where Closed Corner looks different
in Flat Pattern if the body is mirrored is fixed in release NX 9.0. Note: This problem has been
addressed during the enhancement of Sheet Metal Mirror Body command in NX 9.0. The
changes are versioned and cannot be made available in earlier versions of NX. User has to
re-create the Mirror Body feature in NX 9.0 or later versions and then the correct Flat Pattern
is generated for mirrored Closed Corner feature.
1952192
1953173
2033370
Siemens PLM believes that the problem you reported where users are 'unable to attach
blends' in Playback will be resolved by code changes made to the upcoming release of our
software NX 9.0.
2038209
The problem where the information regarding the NX support for Parasolid units was missing
is fixed in NX 9.0 and the discription reads as follows: INFORMATION FOR PARASOLID
IMPORT: When you import a Parasolid file, NX consider the dimensions in Parasolid file as
meters and imports them by converting the values to the unit set for the current part file.
Example: If you import a Parasolid cube of 1 X 1 X 1 units in an NX part file with units set to
millimeters, it is imported as a cube of 1000 mm X 1000 mm X 1000 mm. If you import the
same Parasolid cube in an NX part file with units set to meters, it is imported as a cube of 1
m X 1 m X 1 m. INFORMATION FOR PARASOLID EXPORT: When you export a NX part
file to Parasolid format, NX converts all the dimension values to meter in the Parasolid file.
Example If you export a cube of 100 mm X 100 mm X 100 mm to Parasolid format, NX
converts the dimensions to meters and exports it as a cube of 0.1 X 0.1 X 0.1 units.
2042964
The problem where specific fatigue life results cannot be displayed and the Max/Min markers
of the legend disappear from the NX2/Structures post-processor is fixed in NX 3.0.1.2.
Unfortunately we cannot easily backport this fix to NX 2, because the post-processor
changed a lot between NX 2 and NX 3.
2046461
The problem where the Open API function UF_MODL_check_interference() reports a solid
touching a sheet as interference has been fixed in NX 6.
2052391
Siemens PLM believes that the problem you reported where Face Blend fails to update with
"Unable to attach Blends", will be resolved by code changes made to the upcoming release
of our software NX 9.0.
2066804
Siemens PLM believes that the problem you reported where Japanese annotation was lost
when drawings were imported into the Visual Editor will be resolved by code changes made
to the upcoming release of our software NX 9.0.
2079300
Siemens PLM believes that the problem you reported where a com error was received when
creating part family members, will be resolved by code changes made to the upcoming
release of our software NX 9.0.
2088368
Siemens PLM believes that the problem you reported where attempting to delete an
arrangement which is referenced by a view on a drawing would give a misleading message
"This arrangement is used by an exploded view" will be resolved by code changes made to
the upcoming release of our software NX 9.0.
2098049
The problem you reported for Move Face feature does not accept specified/required values
with an update error of 'A face that would be affected by the change could not adapt to
accommodate the change.' has been resolved in NX 5.0.5.
2101038
Siemens PLM believes that the problem you reported where the Position Symbol in the
Assembly Navigator does not update automatically when using the Reuse Library will be
resolved by code changes made to the upcoming release of our software NX 9.0.
2102411
2108333
Siemens PLM believes that the problem you reported where a Body will not Subtract after
changing parameters will be resolved by code changes made to the upcoming release of our
software NX 9.0.
2110373
Siemens PLM believes that the problem you reported where Extract Path of an Assembly
Sequence does not avoid a component that contains a Faceted Body, will be resolved by
documentation changes made to the upcoming release of our software NX 9.0.
2110938
Siemens PLM believes that the problem you reported where rebend was not possible using
bodies that were created by an instance will be resolved by code changes made to the
upcoming release of our software NX 9.0. The new behavior is to avoid rebend on bodies
that are copied or instantiated. These copied or instantiated bodies do not have unbend
features on them and the transformation matrix on them is just copied with adjustments
made according to the transform of the body. In general, the user should be able to create
rebend on unbend features only. Bodies which do not have unbend features cannot be
rebent. The general workflow is to transform or instantiate a body in a bent state and then
unbend it, and then rebend it when ready.
2112030
2114482
Siemens PLM believes that the problem you reported where an Offset Face feature fails to
update will be resolved by code changes made to the upcoming release of our software NX
7.5.2.
2115698
Siemens PLM believes that the problem you reported where the Assemblies Cloning option
is missing after entering/exiting Drafting will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2116493
Siemens PLM believes that the problem you reported where a hole disappears when using
Replace Face will be resolved by code changes made to the upcoming release of our
software NX 9.0.
2122211
Siemens PLM believes that the problem you reported where the NX Open C API
Siemens PLM believes that the problem you reported where selecting the back button while
inserting a UDF (User Defined Feature) and creating one of its positioning dimensions
resulted in an error will be resolved by code changes made to the upcoming release of our
software NX 9.0.
2122886
Siemens PLM believes that the problem you reported where the Preview result of the "Pull
Face" is flipping in some values will be resolved by code changes made to the upcoming
release of our software NX 9.0.
2122966
Siemens PLM believes that the problem you reported where the Synchronous Modeling
Move Face command, that worked in NX5 fails in NX 6, will be resolved by code changes
made to the upcoming release of our software NX 9.0.
2123648
Siemens PLM believes that the problem you reported where a Flow Cut operation is creating
duplicate tool paths in two places will be resolved by code changes made to the upcoming
release of our software in NX 9.0.
2127762
Siemens PLM believes that the problem you reported where Assembly FEM created in
CAESE cannot be properly opened in NX will be resolved by code changes made to the
upcoming release of our software NX Advanced Simulation Version 9.0.
2130807
Siemens PLM believes that the problem you reported where the SB Normal Cutout feature is
pasted, the SB Dimple is randomly placed will be resolved by code changes made to the
upcoming release of our software NX 9.0. For Pre-NX 9.0 parts, the user should open the
part in NX9 and use Edit -> Feature -> Playback, save the part, and then try the operation
described:
1. Edit --> Copy Feature
2. Add Dependent Feature :ON --> Select Datum Co-ordinate System --> OK
3. Edit --> Paste --> Expressions: Link to Original --> OK.
2131482
Siemens PLM believes that the problem you reported where a Patch feature caused a face
in the parent body to become divided into two faces, will be resolved by code changes made
to the upcoming release of our software NX 9.0.
2132070
Siemens PLM believes that the problem you reported where the Assembly Constraints
dialog presented the Arrangements option when invoked in a piece part, allowing the user to
select "Apply to Used" even though Arrangements are not applicable in a piece part, leading
to constraints being created suppressed, will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2135527
Siemens PLM believes that the problem you reported where 'Delete Face' fails to update will
be resolved by code changes made to the upcoming release of our software NX9.0. The
user will need to recreate the Delete Face in NX 9.0.
2136985
Siemens PLM believes that the problem you reported where the users was unable to edit
[Total Duration] number in the Detail panel for Assembly Sequence will be resolved by code
changes made to the upcoming release of our software NX 9.0. The problem where the
Assemblies Help did not explain that, in the Sequence Navigator Details panel, you can edit
the Total Duration of a sequence step but not the Total Duration of a sequence, is now fixed.
Pre-NX 9.0 releases of the help correctly state that not all Sequence Navigator Details panel
properties can be edited, and give instructions for how to open an editable property for
editing. However, the topics that provided the details about each property were not visible in
the help. That problem has been fixed in NX 9.0.
2137352
Siemens PLM believes that the problem you reported where the Staggered Assembly
Sequencing Numbering is not documented will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2140260
Siemens PLM believes that the problem you reported where the documentation for
Assembly Navigator display commands for nodes did not state that the MB3 commands
displayed depend on whether you right-click single or multiple nodes will be resolved by
code changes made to the upcoming release of our software NX 9.0.
2143280
Siemens PLM believes that the problem you reported where the user can not copy a custom
symbol using Edit ->Transform, will be resolved by code changes made to the upcoming
release of our software NX 9.0.
2143669
Siemens PLM believes that the problem you reported where no message was given to the
user if a part was excluded or not added to an assembly will be resolved by code changes
made to the upcoming release of our software NX 9.0.
2144313
Siemens PLM believes that the problem you reported where the macro executed from the
batch cannot be executed because of the error, will be resolved by code changes made to
the upcoming release of our software NX 9.0.
2146184
Siemens PLM believes that the problem you reported where a 2D shaded view did not Fit in
the preview window, will be resolved by code changes made to the upcoming release of our
software NX 9.0.
2146982
Siemens PLM believes that the problem you reported where the Assemblies Help needed
information about two Assembly Navigator icons associated with constraints, will be resolved
by documentation changes made to the upcoming release of our software NX 9.0. The icon
that looks like a green check in a square with an additional square behind it is used for
constraints that have a characteristic that is arrangement-specific; for example, the
constraint is suppressed in that arrangement or has a different expression value. The icon
that looks like a watch is obsolete. Until NX 7.5.2, when the Assembly Navigator constraint
icons were overhauled, the watch icon was used to mark a constraint that had never been
solved. In NX 7.5.2, this icon was replaced by several other icons that provide more
information about why a constraint is unsolved.
2148487
Siemens PLM believes that the problem you reported where NX7513MT-UAF64bit-003 Error
occurs by executing "Playback" will be resolved by code changes made to the upcoming
release of our software NX 9.0.
2149334
Siemens PLM believes that the problem you reported where the Selection Scope toggles to
"Within Work Part Only' for curve selection will be resolved by code changes made to the
upcoming release of our software in NX 7.5.2.
2150559
Siemens PLM believes that the problem you reported where additional documentation on the
Save As function for Non-Master part files, will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2150772
Siemens PLM believes that the problem you reported where the PMI leader point moves
when importing an I-deas drawing the will be resolved by code changes made to the
2152801
The problem where the documentation did not explain why the order of Character Fonts in
the Customer Defaults was different to the order in the Font to Replace list, will be resolved
by changes to the documentation to the upcoming release of our software NX 9.0.
Information has been added regarding the sequence of the Character fonts list in the
Character fonts dialog box topic in the Font to Replace row of the table. The page with the
updated topic can be found in NX 9.0 documentation here: Home > System Administration >
Customizing the NX installation > Fonts > Character Fonts
2152893
Siemens PLM believes that the problem you reported where 'Move Face' fails and raises the
error, "The change failed because a geometric condition could not be maintained" will be
resolved by code changes made to the upcoming release of our software NX 9.0.
2153344
Siemens PLM believes that the problem you reported where Check Clearances gives
incorrect results with hidden than shown component, will be resolved by code changes made
to the upcoming release of our software NX 9.0. The problem where the Simple Interference
Check dialog gives incorrect results after hiding then showing a component is fixed in
release NX 9.0. Please note that the Simple Interference Check dialog has been removed in
NX 9.0; the PR workflow can be performed using the Clearance Browser instead. When
using the Clearance Browser the problem does not occur.
2153444
The problem where a part file size increases abnormally has been closed as an
Enhancement Request .The original body has 1000000 edges and faces, because we don't
delete unused edges and faces the part is very big.
2154732
Siemens PLM believes that the problem you reported where an Extrude/Unite operation
would fail after a Rebend operation will be resolved by code changes made to the upcoming
release of our software NX 9.0.
2155000
Siemens PLM believes that the problem you reported where using a level based approach
produces extra passes in Cavity Milling will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2155280
The problem where the Assemblies Help needed information about lightning bolt and bracket
symbols that sometimes appear in the graphics window with assembly constraints is fixed in
NX 9.0 documentation. The lightning bolt appears for non-associative constraints that
appear temporarily while you are in certain dialog boxes. The constraint is deleted when you
exit the dialog box. The brackets appear when you create a Touch Align constraint with the
Prefer Touch option. The symbol indicates that NX will switch between Touch and Align
constraints as necessary to solve the constraint. It disappears when NX makes the final
determination or when you exit the Assembly Constraints dialog box.
2155366
Siemens PLM believes that the problem you reported where an unused customer default
"Parent Object Highlight Color" appears in the Analysis->Assembly Clearance->Report
group, will be resolved by code changes made to the upcoming release of our software NX
9.0.
2155949
Siemens PLM believes that the problem where the Class Selection dialog box did not
mention the behavior of Type Filter - Face option is fixed in NX 9.0. The following note is
added to the Class Selection dialog box topic: Note: In the Select by Type dialog box, the
Face option is not selected by default. To select faces on solid or sheet bodies, you must
change the selection filter to Face, or on the Top Border bar, set the Type Filter list to Face.
Siemens PLM believes that the problem you reported where the text listing produced by the
Report command in the Clearance Browser truncates part names, will be resolved by code
changes made to the upcoming release of our software NX 9.0.
2158165
The problem where additional documentation is needed to explain how to change the name
of a non-master file is fixed in release NX 9.0. The description of the Save As functionality is
modified to include that you can modify the dataset name. The documentation is updated as
follows: The following Save As actions are available for non-masters: o Save As Creates a
new non-master from the existing non-master item. The item number and item name stay
the same and the revision and dataset name are automatically set to the appropriate value
as defined at your site. You can change the revision and dataset name by entering a
different value.
2158298
Siemens PLM believes that the problem you reported where the crosshatch angle in
compare report (detailed) is reporting angles in radians will be resolved by code changes
made to the upcoming release of our software NX 9.0.
2158614
Siemens PLM believes that the problem you reported where it was not possible to input
duplicate attribute names if the ANT properties dialog was closed, will be resolved by code
changes made to the upcoming release of our software NX 9.0.
2158880
About the message displayed when the same attribute name is made.
2160763
How can I display the grid line at the expanding members view in NX 7.5?
2162095
Siemens PLM believes that the problem you reported where the "information window
displays behind product interface menu" will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2162209
Siemens PLM believes that the problem you reported where the highlighting of child
components under a selected assembly was inconsistent, will be resolved by code changes
made to the upcoming release of our software NX 9.0.
2163475
Siemens PLM believes that the problem you reported where the reference set is not retained
when you perform 'Edit Component Arrays -> Replace Component', will be resolved by code
changes made to the upcoming release of our software NX 9.0.
2163579
Siemens PLM believes that the problem you reported where the length of a vector is zero
when editing a Radial Dimension in history-free mode will be resolved by code changes
made to the upcoming release of our software NX 9.0.
2163976
Move object to copy objects and custom symbol result in not all object copied.
2166301
Siemens PLM believes that the problem you reported with tolerance action when doing
subtractions, will be resolved by code changes made to the upcoming release of our
software NX 9.0.
2167234
Siemens PLM believes that the problem you reported where plotting a shaded view from a
drawing, using the output as jpeg, tiff or CGM is incorrect, will be resolved by code changes
made to the upcoming release of our software NX 9.0.
2167520
Siemens PLM believes that the problem you reported where an existing Datum plane
disappears from reference set "Tools" will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2168404
Siemens PLM believes that the problem you reported where a user cannot cancel when
using the Deselect All option in Clearance Set will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2169218
Siemens PLM believes that the problem you reported where a Sketch could not be pasted
on a specified plane will be resolved by code changes made to the upcoming release of our
software NX 9.0.
2169325
Siemens PLM believes that the problem you reported where there were problems with
circular curves created in Drafting will be resolved by code changes made to the upcoming
release of our software NX 9.0.
2170445
Siemens PLM believes that the problem you reported where a Bend fails will be resolved by
code changes made to the upcoming release of our software NX9. Please re-create the
Bend features in NX9. Any new Bend feature in NX 9.0 will not experience this issue.
2171636
Siemens PLM believes that the problem you reported where View Dependent Edits on
Background Faces in a Section view did not provide the expected results will be resolved by
code changes made to the upcoming release of our software NX 9.0.
2171655
2172329
Siemens PLM believes that the problem you reported where Simple Interference or an
Intersection operation fails, depending on the selection order, will be resolved by code
changes made to the upcoming release of our software NX 9.0.
2172438
Siemens PLM believes that the problem you reported where GetCommittedObjects() does
not report Pasted Objects will be resolved by code changes made to the upcoming release
of our software NX 9.0.
2172575
Siemens PLM believes that the problem you reported where the documentation did not detail
the differences between Extracted Face and Sheet Body, will be resolved by documentation
changes made to the upcoming release of our software NX 9.0. The following note has been
added to the overview page of Extract Geometry: Some differences exist between a face
extracted with Extract Geometry and a sheet body: * An extracted face can be re-linked,
while a sheet body cannot. * To enlarge an extracted face a copy must be made, while a
sheet body can be enlarged without creating a copy.
2173159
Siemens PLM believes that the problem you reported where URL validation is different in
customer defaults and preference, will be resolved by code changes made to the upcoming
release of our software NX 9.0.
2173254
Siemens PLM believes that the problem you reported where "Move Face is failed update"
will be resolved by code changes made to the upcoming release of our software NX 9.0 ip1.
2173620
Siemens PLM believes that the problem you reported where highly distorted mesh was
generated when the element type was switched from S4 to S3 and back will be resolved by
code changes made to the upcoming release of our software NX 9.0.
2174060
Siemens PLM believes that the problem you reported where Documentation is not clear
when an open sketch is selected for Extrude will be resolved by changes made to the
Siemens PLM believes that the problem you reported where editing a feature caused
multiple, previously created features to update will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2174609
Siemens PLM believes that the problem you reported where NX was generating differing
meshes will be resolved by code changes made to the upcoming release of our software
V9.0.
2174668
Siemens PLM believes that the problem you reported where the GRIP command EDRFST
could not be used to edit a flat pattern reference set will be resolved by code changes made
to the upcoming release of our software NX 9.0.
2175260
Siemens PLM believes that the problem you reported where the Component was not
discovered as a selection candidate when in Lightweight mode will be resolved by code
changes made to the upcoming release of our software NX 9.0.
2175322
2175693
Siemens PLM believes that the problem you reported where using the MiddleMouseButton
to <enter> will close the dialog will be resolved by code changes made to the upcoming
release of our software NX 9.0.
2176009
Siemens PLM believes that the problem you reported where a UDF's children were not
reported in Information Window, will be resolved by code changes made to the upcoming
release of our software NX 9.0.
2176980
Siemens PLM believes that the problem you reported where "Model Check Overview" page
had incorrect information in NX Documentation will be resolved by code changes made to
the upcoming release of our software NX 8.5. The Model Check documentation has been
completely reworked along with the complete UI rework of the command in NX 8.5. The
main article, "Checking your finite element model" now lists all available Model Check
commands and provides links for more in-depth information on each command.
2177059
Siemens PLM believes that the problem you reported where "Need more exxplanation in NX
Documentation about searching in UDF Library browser" will be resolved in NX 9.0
Documentation. Rewrote the Search description of the UDF Library Browser topic: "Lets you
find UDFs in the specified library by typing all or part of a UDF name and pressing Enter.
The search starts from the beginning of the library and stops when a UDF matching the full
or partial name is found. The view in the library browser changes with the found UDF in the
left-most position of the first row and all remaining UDFs in the library following it. Pressing
Enter successively continues the search through the library for other UDFs that match the
name, stopping at each one. When the search reaches the last matching UDF in the library
pressing Enter again restarts the search from the beginning of the library." Also did general
cleanup on the rest of the topic.
2177699
CPJ : When we set Lightweight mode, we can't get the component in FilterCallBack.
2177926
Siemens PLM believes that the problem you reported where Abaqus odb output request
need 3 options as History, Field and Field&History will be resolved by code changes made to
the upcoming release of our software NX 9.0.
2178192
Siemens PLM believes that the problem you reported where a SolidWorks file, consisting of
multiple bodies, only displayed a single body when opened in NX, will be resolved by code
Siemens PLM believes that the problem you reported where drawing size when output in
TIFF format is not correct will be resolved by code changes made to the upcoming release of
our software NX 9.0.
2179284
2179976
Siemens PLM believes that the problem you reported where "Check for Sweepable Body"
option in Split Body dialog displays invalid warnings, will be resolved by documentation
changes made to the upcoming release of our software, NX Advanced Simulation, version
9.0. Development will add additional documentation to the Split Body help regarding the
sweepability check. The changes will explain that the software will color any body with more
than 100 faces red, as it cannot (for computational reasons) efficiently evaluate the
sweepability of such a body. Additional details will also be added about the criteria the
software uses to evaluate whether to color the body green, yellow, or red.
2179991
Siemens PLM believes that the problem you reported where a user cannot save same Item
ID as the deleted CAE Item will be resolved by code changes made to the upcoming release
of our software NX 9.0 used in conjunction with Teamcenter 9.1.
2181345
Siemens PLM believes that the problem you reported where reversing the direction of an NX
Sheet Metal Dimple raised the Alert: "Failed to create preview. Verify inputs", will be
resolved by code changes made to the upcoming release of our software NX 9.0.
2181445
2181849
Siemens PLM believes that the problem you reported where an edit to a bilateral tolerance
of an angle was not correct will be resolved by code changes made to the upcoming release
of our software NX 9.0.
2183097
Siemens PLM believes that the problem you reported where "Move Face is failed update."
will be resolved by code changes made to the upcoming release of our software NX 9.0 ip1.
2183276
Siemens PLM believes that the problem you reported where About the lower text of surface
finish symbol will be resolved by code changes made to the upcoming release of our
software NX 9.0.
2183313
Siemens PLM believes that the problem you reported where the message "Cannot create
top or bottom sheets for the groove weld" is returned when using the V Groove Weld will be
resolved by code changes made to the upcoming release of our software NX 9.0.
2183458
Siemens PLM believes that the problem you reported where a gap occurred between an
FCF box and its leader when Custom Zone will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2183644
Siemens PLM believes that the problem you reported where a modeling section cannot be
moved to another layer using "Move to Layer", will be resolved by code changes made to the
upcoming release of our software NX 9.0. In NX 9.0, layer control has been added to the
View Section dialog. It can be used to specify the layer on which the Associated Section
Curves, created by the View Section, are created.
2183796
Siemens PLM believes that the problem you reported where the instance of a symbol is
transformed strangely due to scale value, will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2183872
The problem where SheetMetalManager.GetOppositeFace() returned face pairs that did not
make sense when a Modeling Unite operation had been performed on a sheet metal part will
be resolved by code changes made to the upcoming release of our software NX 9.0.
2184924
Siemens PLM believes that the problem you reported where customer felt the
documentation for Trim Curve was incorrect, will be resolved by code changes made to the
upcoming release of our software NX 9.0. The option text in the "Curves to Trim" group of
the HELP was rewritten for the Trim Curve command:
Select Curve - Lets you select one or more curves to trim or extend. If you select a chain of
curves to trim, the trimming operation is performed as though it were one continuous curve.
If you select a single curve to trim, a temporary oval appears on one of its ends to help you
identify it. The end of the curve the oval appears on depends on the setting of the End to
Trim option. * If End to Trim is set to Start, the temporary oval appears on the curve end
closest to the end you selected. * If End to Trim is set to End, the temporary oval appears on
the curve end farthest from the end you selected. The end of the curve that is actually
trimmed is the end you select in relation to the bounding object, and the setting of the End to
Trim option. For example, if End to Trim is set to Start, and you:
1.Select the nearest end of the curve to trim,
2.And the pick-point is right of the bounding object,
The curve is trimmed from the bounding object toward the right end of the curve to trim. If
you make the same selection and use the same pick point but change the End to Trim option
to End, the curve is trimmed from the bounding object toward the left end of the curve to
trim. End to Trim - Lets you switch the temporary End to Trim oval to the other side of the
curve to trim, reversing the end of the selected curve that will be trimmed.
2186114
Siemens PLM believes that the problem you reported where there is a Face Blend error
when the part is replayed will be resolved by code changes made to the upcoming release of
our software NX 9.0.
2186568
Siemens PLM believes that the problem you reported where Editing the Bead Feature
causes some "Edge Number" change in Sketch is converted to an ER. The problem is due
to face id change of the lanced walls of the bead in this specific workflow. Fixing this is
expensive and will have to be versioned. Hence this PR is converted to an ER(Enhancement
Request) for future enhancement.
2186784
2187119
Siemens PLM believes that the problem you reported where the "Parent Part" of the "Linked
Coordinate System" is not correct after replacing a component with a new revision, will be
resolved by code changes made to the upcoming release of our software NX 9.0.
2187327
Siemens PLM believes that the problem you reported where the monochrome output is not
correct, will be resolved by code changes made to the upcoming release of our software NX
9.0. In addition, in NX 8.5 it can be fixed if you use the new export processing that has
become the default in NX 9.0. You can do this by setting: UGII_SDI_EXPORT_NEW=1.
2187500
Siemens PLM believes that the problem you reported where Dimension Rules for Drafting
Automation preferences will be resolved by code changes made to the upcoming release of
our software NX 9.0.
2187620
Siemens PLM believes that the problem you reported where "Cylindrical dimension moves to
different location when imported as dxf file into NX" will be resolved by code changes made
to the upcoming release of our software NX 9.0.
2187792
Siemens PLM believes that the problem you reported where users did not know how to
define Context Help Key and Help URL for PTS will be resolved by code changes made to
the upcoming release of our software NX 9.0. A new page has been added to the NX 9.0
Documentation which defines all the fields on the PTS Attributes tab.
2187945
Siemens PLM believes that the problem you reported where Switching Show/Hide toggle on
Component groups for a Sub-Assembly has different behavior from the Show/Hide on the
Sub-Assembly, will be resolved by code changes made to the upcoming release of our
software NX 9.0. The problem where toggling a Component Group to 'On' acted as a 'Show
Node' operation on each of the nodes selected by the Component Group (affecting only
those nodes) while toggling it 'Off' acted as a 'Hide' operation (affecting the selected nodes
and their children) is fixed in NX 9.0. Toggling to 'On' now acts as a 'Show' operation for
consistency with the 'Hide' operation when toggling off. The Show/Hide menu on a
Component Group's contextual menu has been extended to contain 'Show', 'Hide', 'Show
Node' and 'Hide Node' options.
2187962
Siemens PLM believes that the problem you reported where PTS documentation for initial
values for template parameters is not clear, will be resolved by code changes made to the
upcoming release of our software NX 9.0. The following procedure is added to NX 9.0
documentation: Set Initial values for template parameters When you add a product template
to an assembly, NX can scan the existing expressions in the assembly. If an expression has
the same name as a parameter in the template part file, NX WAVE links these expressions
and uses the initial value of the parameter in the template dialog box.
1.Open a template part file in Product Template Studio.
2.Double-click the template thumbnail title bar, or click Maximize .
3.On the Interface tab select an expression for which you want NX to set the initial value.
4.On the Initialization tab, make sure the Enable smart initialization check box is selected.
5.From the Initialization source list, select Interpart expression from the drop target.
6.In the Attribute name box, enter the name of an expression from the assembly part file that
you want to WAVE link to the selected expression in the template part file.
7.On the Template Operation toolbar, click Publish to save the template.
8.Start an new NX session.
9.In NX open the assembly part file.
10.In the Expressions dialog box, make sure the expression you specified in Product
Template Studio exists.
11.From the Reuse Library, drag and drop the template part file to the graphics window.
12.In the Template Explorer double-click the product template. The template dialog box is
displayed and the expression is set to the value specified in the assembly file.
13.In the template dialog box, click OK to accept the initial parameter values.
The expression in the template part file is WAVE linked to the expression in the assembly
file. When you change the expression in the assembly part file, the expression in the
template part file will also change. Note:You can also enable Routing and Modeling
attributes.
2188284
The problem "Specific component of an assembly can not be shaded" is resolved in NX 9.0.
2188330
The object of "View Section" would move to "Work Layer" when show View Section.
2188361
Siemens PLM believes that the problem you reported where there was an issue with parent
part of a wave in the TCNX environment will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2188484
Siemens PLM believes that the problem you reported where internal memory errors occur
when using Variants in Electrical Routing will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2188935
Siemens PLM believes that the problem you reported where there was a difference between
NX and the Help documentation when the Graph Overhead percentage is 100 will be
resolved by code changes made to the upcoming release of our software NX 9.0.
2189249
Siemens PLM believes that the problem you reported where the windows taskbar
commands to tile vertically or horizontally doesn't work for NX is fixed in will be resolved by
code changes made to the upcoming release of our software NX 9.0.
2189397
Siemens PLM believes that the problem you reported where Failed to import the part with
PMI lightweight section view will be resolved by code changes made to the upcoming
release of our software NX 9.0.
2189426
Siemens PLM believes that the problem you reported where the ug_clone.exe
documentation using -dir and load_options.def will be resolved by code changes made to the
upcoming release of our software NX 8.5.1 and NX 9.0. The help message for the -dir switch
has been improved.
2190125
Siemens PLM believes that the problem you reported where an intersection curve could not
be created between two sheet bodies, will be resolved by code changes made to the
upcoming release of our software NX 9.0. In the part SUR_ERR_2.prt, the red and blue
faces are invalid. The earlier version of NX did not detect this invalidity while importing those
faces in NX. This problem has been solved in NX 9.0. So, now, NX detects such invalid
faces while importing the faces and correct those invalidities in the importing process. These
invalidities are now also reported through the Analysis -> Examine Geometry command. To
correct the invalidities you need to re-import those faces again in NX 9.0 or later version.
2190378
Siemens PLM believes that the problem you reported where a promoted body displayed
using lightweight representations could be selected multiple times will be resolved by code
changes made to the upcoming release of our software NX 9.0.
2190586
Siemens PLM believes that the problem you reported where when working in NX Manager
mode, an assembly load option revision rule which is set using the NX Open C API function
UF_UGMGR_set_config_rule is not saved by File-> Options-> Assembly Load Options->
Save As Default will be resolved by code changes made to the upcoming release of our
software NX 9.0.
2190723
Siemens PLM believes that the problem you reported where garbled characters occur in a
GOHOME dialog will be resolved by code changes made to the upcoming release of our
software NX 9.0.
2191041
2191409
Siemens PLM believes that the problem you reported where a view gets deleted when
loading a precise assembly using the 'Latest Working' option when multiple revisions is
enabled will be resolved by code changes made to the upcoming release of our software NX
9.0.
2191682
Siemens PLM believes that the problem you reported where selecting an item in TC
Navigator asks for UNSUPPORTED: "wave" license will be resolved by code changes made
to the upcoming release of our software NX 9.0.
2192579
Siemens PLM believes that the problem you reported where the documentation for the
NXOpen UnloadLibrary() method needed addtional information to clarify how it is expected
to work will be resolved by code changes made to the upcoming release of our software NX
9.0.
2192736
Siemens PLM believes that the problem you reported where "Update failure list" Correction
of a Japanese expression will be resolved by code changes made to the upcoming release
of our software NX 9.0.
2193871
Siemens PLM believes that the problem you reported where "UAF/UAD Failure(NX 8.0.2.2):
Subtract failed to update" will be resolved by code changes made to the upcoming release of
our software NX 9.0 ip19.
2193978
Siemens PLM believes that the problem you reported where "UAF/UAD Failure- Through
Curve Mesh is failed to update" will be resolved by code changes made to the upcoming
release of our software NX 9.0 ip10.
2193984
Siemens PLM believes that the problem you reported where " Move Face is failed to update"
will be resolved by code changes made to the upcoming release of our software NX 9.0.0.4.
2194853
Siemens PLM believes that the problem you reported where "Data set cannot load, if there
are 99 empty folders with same name in temp directory" will be resolved by code changes
made to the upcoming release of our software NX 9.0. As a workaround the user can simply
deleted these empties directories to resolve the issue.
2195955
Siemens PLM believes that the problem you reported where The response of NX slows due
to the impact from the stopping of 1st lic server will be resolved by code changes made to
the upcoming release of our software NX 9.0.
2196197
Siemens PLM believes that the problem you reported where "Save Favourite" is not working
correctly in block dialogue will be resolved by code changes made to the upcoming release
of our software NX 9.0.
2196592
Siemens PLM believes that the problem you reported where View Collection cannot get the
Lightweight section view will be resolved by code changes made to the upcoming release of
our software NX 9.0.
2196662
15-Sep-2009)
PR 2120585: Hidden lines are displayed in hidden line mode with perspective (P2; 05-May2009; End User 1203948)
PR 5977641: No Graphic Feedback for selecting concave edge with Edge Emphasis=Off
(P2; 18-Jun-2008)
2196669
Siemens PLM believes that the problem you reported where multiple movies cannot be
created using the playback of a Journal will be resolved by documentation changes made to
the upcoming release of our software NX 9.0. When the first movie ends, the call to start
next movie is immediate. Playback Journal does not wait to start the next movie. Because
the first movie is still being written, the software returns the appropriate error message. The
documentation will now state that multiple consecutive movies cannot be made with a single
journal.
2196983
Siemens PLM believes that the problem you reported where the selected point on a face is
incorrect using measure distance on a lightweight body, will be resolved by code changes
made to the upcoming release of our software NX 9.0.
2197288
Siemens PLM believes that the problem you reported where position of Grid Plane is not
changing when setting WCS to Datum CSYS will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2197793
NX: CPJ: Cannot create the multiple movies sequentially using NXOpen API.
2198223
Siemens PLM believes that the problem you reported where move object creates trailing
element when moving curve with Surface Finish symbol will be resolved by code changes
made to the upcoming release of our software NX 9.0.
2198820
Siemens PLM believes that the problem you reported where the same input file has different
mesh names when imported into different versions of NX will be resolved by code changes
made to the upcoming release of our software NX 9.0.
2198853
Siemens PLM believes that the problem you reported where a part file was larger than
expected will be resolved by code changes made to the upcoming release of our software
NX 9.0. After opening the file in NX 9.0 and saving as a new file, the file size will be as
expected.
2198917
Siemens PLM believes that the problem you reported where web length 'Equal to' condition
result was not mentioned in checker help document will be resolved by documents changes
made to the upcoming release of our software NX 9.0 Also the following problem was
reported. 'Check Web Length' test was failing if any of the sheet metal web faces have a
length that is equal to the minimum web length specified in the Sheet Metal preferences.
Solution Provided: The web length comparing condition has been changed. Now "Check
Web Length" of Check-Mate test will pass if all web faces in the sheet metal body have a
length that is equal to OR greater than the specified minimum web length.
2198918
Siemens PLM believes that the problem you reported where Detail Filtering button in Class
Selection is not enabled will be resolved by code changes made to the upcoming release of
our software NX 9.0.
2199071
Siemens PLM believes that the problem you reported where a Draft fails to update when
editing the Angle value from 1 to 0 will be resolved by code changes made to the upcoming
release of our software NX 9.0.
2199331
2199332
Siemens PLM believes that the problem you reported where the associativity of a PMI Note
was broken when editing a non-associated feature will be resolved by code changes made
to the upcoming release of our software NX 9.0.
2199645
Siemens PLM believes that the problem you reported where Setting of "Customer Defaults"
for Undo size is not influenced will be resolved by code changes made to the upcoming
release of our software NX 9.0.
2199914
Siemens PLM believes that the problem you reported where Check Web Length of CheckMate test does not follow the preference setting will be resolved by code changes made to
the upcoming release of our software NX 9.0.
2199979
Siemens PLM believes that the problem you reported when Select All is specified in
Information / Welding NX crashes will be resolved by code changes made to the upcoming
release of our software NX 9.0.
2200349
Siemens PLM believes that the problem you reported where An error is not displayed
although it cannot subtract will be resolved by code changes made to the upcoming release
of our software NX 9.0.
2200440
Siemens PLM believes that the problem you reported where the Component is cloned with
Retain as clone action, assembly also gets cloned even if no references exists will be
resolved by code changes made to the upcoming release of our software NX 9.0.
2200539
Siemens PLM believes that the problem you reported where lines with view dependent edits
were not being output correctly to IGES will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2200594
Siemens PLM believes that the problem you reported where the performance of NX is very
slow for the operations executed in history free mode will be resolved by code changes
made to the upcoming release of our software NX 9.0. The user needs to execute part
cleanup in NX 9.0 for this issue part. Also such kind of bad part data will not be created from
NX 9.0.
2200666
Siemens PLM believes that the problem you reported where Multiple warnings by using
expression block will be resolved by code changes made to the upcoming release of our
software NX 9.0.
2200916
Siemens PLM believes that the problem you reported related to Groups and the Move
Object command, will be resolved by code changes made to the upcoming release of our
software NX 9.0.
2201316
Siemens PLM believes that the problem you reported where non-interfering bodies are not
hidden while studying a hard interference in the Clearance Browser will be resolved by code
changes made to the upcoming release of our software NX 9.0.
2201451
Siemens PLM believes that the problem you reported where Offset Surface gives alerts
about Maximum objects to exclude will be resolved by code changes made to the upcoming
release of our software NX 9.0.
2201495
2202115
Siemens PLM believes that the problem you reported where "Error occurs when doing Undo
if base view ratio is changed" will be resolved by code changes made to the upcoming
release of our software NX 8.5 and NX 9.0.
2202508
Siemens PLM believes that the problem you reported where the solid body is not displayed
when changing modeling mode to History Free mode will be resolved by code changes
made to the upcoming release of our software NX 9.0.
2202586
Siemens PLM believes that the problem you reported where "PSB26.0.119 fix Optimize
Face using .001mm creates invalid faces." will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2202609
Siemens PLM believes that the problem you reported where the feature error appears when
NX is upgraded will be resolved by code changes made to the upcoming release of our
software NX 9.0.
2202617
Siemens PLM believes that the problem you reported where After export to "2D Exchange"
circle changes to ellipse will be resolved by code changes made to the upcoming release of
our software version NX 8.5.2 MP & NX 9.0.
2202628
Siemens PLM believes that the problem you reported where "About input regulation of the
name of the property of a face" will be resolved by code changes made to the upcoming
release of our software NX 9.0. NX documentation will be updated to include the characters
which are not allowed to be used in names.
2202839
Siemens PLM believes that the problem you reported where Incorrect translation of JT when
"Assembly Cut" exist in assembly will be resolved by code changes made to the upcoming
release of our software NX 9.0.
2202879
2203018
2203157
Siemens PLM believes that the problem you reported where unable to reclassify the features
and UDF in FBM Geometry is working as designed, however the design is changed from NX
8.0.3 onwards and the procedure to reclassify features is documented in NX 9.0.
Documentation.
2203362
Siemens PLM believes that the problem you reported where the changed colour on active
sketch is not reflected immediately will be resolved by code changes made to the upcoming
release of our software NX 9.0.
2203480
Siemens PLM believes that the problem you reported where a custom symbol shows a
'read-only part modified' message will be resolved by code changes made to the upcoming
release of our software NX 9.0.
2203535
Siemens PLM believes that the problem you reported where UF_PART_close() return
'Invalid part tag' error will be resolved by code changes made to the upcoming release of our
software NX 9.0.
2203545
Siemens PLM believes that the problem you reported where "Error recovery failed if the
drawing template is added" will be resolved by code changes made to the upcoming release
of our software NX 9.0.
2203551
Siemens PLM believes that the problem you reported where move to layer doesn't work for
Group member when group is selected in Part Navigator will be resolved by code changes
made to the upcoming release of our software NX 9.0.
2203566
Siemens PLM believes that the problem you reported where The value of UpdateFailOption
is reset when current feature is reset will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2203615
Siemens PLM believes that the problem you reported where the NewPdmSoaquery()
method throws a Signal 11 error will be resolved by code changes made to the upcoming
release of our software NX 9.0.
2203666
Siemens PLM believes that the problem you reported where the documentation was
incorrect for examine geometry, will be resolved by code changes made to the upcoming
release of our software NX 9.0.
2203757
2203843
Siemens PLM believes that the problem you reported where the description of Optimize
Face is not available in NX Help Documentation will be resolved by the changes made to the
upcoming release of our software NX 9.0.
2203873
Siemens PLM believes that the problem you reported where the documentation on the
Milling 'Cutting Parameters -> Clearance -> Part Geometry' option needs to be improved will
be resolved by code changes made to the upcoming release of our software NX 9.0.
2203879
Siemens PLM believes that the problem you reported where we have insufficient
documentation of [Move Object] "Distance between Points" option" will be resolved by
changes made to the upcoming release of our software NX 9.0.
2203975
Siemens PLM believes that the problem you reported where WaveLinkBuilder.Commit ()
post "Part Material Selection" dialog will be resolved by code changes made to the upcoming
release of our software NX 9.0 A customer default setting has been added in NX 9.0 to
suppress the prompt and let NX select the value for the part material attribute.
2204070
Siemens PLM believes that the problem you reported where "Edit Curve Parameters Spline
section to be changed in HELP" will be resolved by code changes made to the upcoming
release of our software NX 9.0.
2204260
Siemens PLM believes that the problem you reported where the limitations of the Section
Orientation option are incorrectly documented in the Drafting Help, will be resolved by code
changes made to the upcoming release of our software NX 9.0. That option now states
"Section Orientation is not available for Revolved or Unfolded Section views.".
2204411
Siemens PLM believes that the problem you reported where Check-out Parts error occurred
when load the component will be resolved by code changes made to the upcoming release
of our software NX 9.0.
2204490
Siemens PLM believes that the problem you reported where geometry is missing in a section
view, will be resolved by code changes made to the upcoming release of our software NX
9.0.
2204509
Siemens PLM believes that the problem you reported where DynamicSectionBuilder() create
section object with "Medium Crimson" color will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2204628
Siemens PLM believes that the problem you reported where Body Measurement features
will be created in the non master drawings will be resolved by code changes made to the
upcoming release of our software version NX 9.0.
2204634
Siemens PLM believes that the problem you reported where "Merge and move ordinate
dimensions leads to missing one ordinate set" will be resolved by code changes made to the
upcoming release of our software NX 9.0
2204772
Siemens PLM believes that the problem you reported where the content of the NX Manager
login dialog was incorrect in Japanese will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2204904
Siemens PLM believes that the problem you reported where adding a new row to a tabular
note causes new expressions to be created, will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2204908
Siemens PLM believes that the problem you reported where "File Selection with Browse"
dialog shows error will be resolved by code changes made to the upcoming release of our
software NX 9.0.
2205049
Siemens PLM believes that the problem you reported where "The exported color of CGM
differs from a display color" will be resolved by code changes made to the upcoming release
of our software NX 9.0.
2205146
Siemens PLM believes that the problem you reported where create New Section does not
select certain planes will be resolved by code changes made to the upcoming release of our
software NX 9.0.
2205217
Siemens PLM believes that the problem you reported where Mean radius of curvature for
face radius calculation is documented incorrectly will be resolved by code changes made to
the upcoming release of our software NX 9.0.
2205387
Siemens PLM believes that the problem you reported "where face color override did not
worked correctly with Light Weight representation" will be resolved by code changes made to
the upcoming release of our software NX 9.0.
2205496
Siemens PLM believes that the problem you reported about the mid surface creation
elongated hole feature by manual pairing will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2205558
Siemens PLM believes that the problem you reported where the associativity of Neutral
Factor value of the Contour Flange is lost will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2205589
Siemens PLM believes that the problem you reported where the error occurs after executing
the "mark as template" command in Japanese NX will be resolved by code changes made to
the upcoming release of our software NX 9.0.
2205602
Siemens PLM believes that the problem you reported where Hide/Show does not work in
assembly clearance navigator will be resolved by code changes made to the upcoming
release of our software NX 9.0.
2205735
Siemens PLM believes that the problem you reported where Control characters "<" and ">"
doesn't provide accurate result will be resolved by code changes made to the upcoming
release of our software NX 9.0.
2205878
Siemens PLM believes that the problem you reported where Output Contact Data not
working for Multi Blade Operations is not documented in NX documentation will be added in
the documentation from the upcoming release NX 9.0 of our software.
2205978
Siemens PLM believes that the problem you reported where the Check Electrode cannot find
the interference body as the Assemblies Interference will be resolved by code changes
made to the upcoming release of our software NX 9.0.
2206061
Siemens PLM believes that the problem you reported where a PTB attribute is not added to
the parts arranged in post placement will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2206120
2206133
Siemens PLM believes that the problem you reported where bookmark load fails to unsuppress components whose status was suppressed in the as-saved state of the assembly
being loaded by the bookmark will be resolved by code changes made to the upcoming
release of our software NX 9.0.
2206318
Siemens PLM believes that the problem you reported where an inconsistent results were
observed when entering invalid characters for a Sheet Name, will be resolved by code
changes made to the upcoming release of our software NX 9.0.
2206383
Siemens PLM believes that the problem you reported where Split Run can't be performed if
the run includes a direct-mount will be resolved by code changes made to the upcoming
release of our software NX 9.0.
2206427
Siemens PLM believes that the problem you reported where ""Threads" is not displayed
when "Revolved Section View" is created" will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2206455
Siemens PLM believes that the problem you reported where through Curves documentation
is not properly described will be resolved by document changes made to the upcoming
release of our software NX 9.0. However, please contact Customer Support to discuss any
specific issues/questions ****
QUESTION 2 **** "Please let me know what kind of influence occurs or at when we can
uses single /multiple patches properly." HELP UPDATED: Added the following text to the
Through Curves help dialog options topic: "A patch is a portion of a sheet. Using more than
one patch to create a sheet gives you more localized control over the curvature of the sheet.
When creating sheets, it is best to minimize the total number of patches used to define the
sheet. Limiting the number of patches improves performance of downstream applications
and produces a smoother sheet." (Extracted from the "Feature Modeling" topic in the
Modeling Help)****
QUESTION 3 **** "Patch Type-"Match String" is not available in NX Help. Please let me
know how it works." HELP UPDATED: In NX 8.5 online help, the following text was added to
the help: Match String - Creates patches that approximate the number of section strings.****
QUESTION 4 **** "What is the procedure of creating a curve mesh surface using the
standard procedures." SHORT ANSWER: "Standard procedures" refers here to the default,
standard construction method for creating a thru curves feature, as opposed to the other
non-standard construction methods, Spline Points and Simple. HELP UPDATED: Changed
the wording of this first sentence to: "Creates a standard curve mesh surface." Added a new
figure showing a normal type thru curve.****
QUESTION 5 **** "When the spline used for section strings is created by Method - "Through
Points", it seems that the position of Poles has shifted. Why so?" SHORT ANSWER:
Surfaces and splines can be defined by their points or their poles. If you move one the other
also moves to support the new topography. For additional information, see the Studio Spline
topics in the Modeling Help.****
QUESTION 6 **** "If "Select Section Template" is set up, the number of control points will
change, but the surface itself will not change. Is there any case which changes the form of
surface also by performing this setup?" SHORT ANSWER: This depends on the surface you
are editing, which curve you select for the section template, other settings you may have set
in the Through Curves dialog box, and what other changes you make to point or pole
positions. There are many, many results you can achieve, too many to reference in the
online help. You may want to refer to courseware or CAST. HELP UPDATED: Added a
figure to show results of adding a section template. Also noted Construction options for the
figure.****
QUESTION 7 **** "A simple surface with constraints avoids the insertion of extra math
components when possible, thus reducing abrupt changes of curvature. What kind of thing
does "extra math components" put? It will become easy to imagine if you can show a
concrete example." SHORT ANSWER: 'Extra math components' refers to the increased
complexity and greater number of algorhythms necessary for NX to construct the mesh
surface. The surface is more mathematically complex, and may affect downstream features
that use or reference the through curve feature. HELP UPDATED: Added a figure showing
the difference between Normal and Simple Construction. Also noted Construction options for
the figure.****
QUESTION 8 **** "It also minimizes the number of patches and the boundary noise in a
surface. Has "the boundary noise in a surface." referred to Continuity - "Select Face"?"
SHORT ANSWER: The term "boundary noise" is not related to the Continuity options and is
incidental to the help text. HELP UPDATED: Removed the term "boundary noise" from the
help text.****
QUESTION 9 **** "When using "Simple", is it a premise which sets Setting - "Preserve
Shape" as OFF? When Setting - "Preserve Shape" is set to ON, even if it sets to "Simple", in
form, the number of control points does not change, either." SHORT ANSWER: Preserve
Shape does not affect the number of control points.****
QUESTION 10 **** "What kind of curve does it assume is chosen in "Select Section
Template"? An alert message [Invalid profile string] is displayed by the curve to choose"
SHORT ANSWER: You can select any generating curve or spline for the section template.
That does not mean every generating curve will always be valid for the selected section. The
alert is a warning that the selected section template has caused the section string to become
invalid.****
QUESTION 11 **** "When using the Simple option, Distance Tolerance and Angle Tolerance
as specified in the Modeling Preferences dialog box are ignored. In this case, refer to what
value for Tolerance?" SHORT ANSWER: The Simple Construction option does not use a
tolerance value. The system does the best refit it can using constraints and builds the
surface directly from the refitted curves. A tolerance is not considered in the operation. HELP
UPDATED: Added a new note to the Help: "Tolerance settings are not used with the Simple
option, so Distance Tolerance and Angle Tolerance settings are ignored." ***
QUESTION 12 **** "Open attachment data model1.prt. Display a [Through Curves (12)]
dialog is displayed and "Multiple" is set up. [Cancel] is chosen after checking form. [Through
Curves (17)] dialog is displayed and "Multiple" is set up. If the above-mentioned operation is
performed, as for [Through Curves (12)], surface will change for a while, but [Through
Curves (17)] does not change at all." SHORT ANSWER: Cannot reproduce. There is only
one Through Curves feature in model1.prt, Through Curves (12). There is no Through
Curves (17). Except for "Cancel" there is no command instruction or operation to perform.
When Open and then Cancel are performed, the display of Through Curves (12) does not
change. Please contact Customer Service to discuss what you are trying to do.****
QUESTION 13 **** "Please open attachment data model2.prt. [Through Curves (9)] Dialog is
Displayed and Patch Type is Set as "Match String". UV Curve will be equalized if the abovementioned operation is performed." SHORT ANSWER: When you set the Patch Type to
Match String, the system creates patches on the Through Curve surface that approximate
the number of section strings. This is why the UV Curve appears to be equalized. See the
answer for Question 3. ****
QUESTION 14 **** Please open attachment data model2.prt. [Through Curves (9)] Dialog is
displayed and Construction is Set as "Simple". Although form does not change by the abovementioned setup, the number of Poles decreases. Choose "Select Section Template" and
Choose Curve. Although the curve created by Sketch (8) is satisfactory, an alert is displayed
when Join Curve is chosen." SHORT ANSWER: On selecting the curves via Join Curve
(from Sketch 8), the surface updates nicely, poles shift, and all appears well. However, no
alert appears. Do not know what is being asked. Please contact Customer Service to
discuss what you are trying to do
2206861
Siemens PLM believes that the problem you reported where there is no detail explanation
about the difference at the snipping point between "Along Part Axis" and "Along Blade
Direction" in Hub_Finish operation on the documentation will be resolved by code changes
made to the upcoming release of our software NX 9.0 ip19.
2206973
Siemens PLM believes that the problem you reported where Two sets of CAE items are
created by "clone of simulation" command have been resolved by code changes made to the
release of our software NX 9.0 ip1. Development indicated that they could not reproduce the
issue in NX 8.5.1.
2207091
Siemens PLM believes that the problem you reported where you cannot unite bodies with
"Thru face does not intersect path of the tool", will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2207108
CPJ:A UI Styler dialog does not re-display, and Internal error occurs.
2207391
Siemens PLM believes that the problem you reported where transformed operation fails to
refresh with F5 will be resolved by code changes made to the upcoming release of our
software NX 9.0 ip 16
2207482
Siemens PLM believes that the problem you reported where unnecessary diameter symbol
will be added when import a DXF will be resolved by code changes made to the upcoming
release of our software NX 9.0.
2207489
Siemens PLM believes that the problem you reported where "Clearance can not found
"Interference" after the move objects(Lightweight)"will be resolved by code changes made to
the upcoming release of our software NX 9.0.
2207521
Siemens PLM believes that the problem you reported where creating non-master part in TC,
changes the layer of master part from 1 to 2 will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2207617
Siemens PLM believes that the problem you reported where "replace face edge is not
displayed when the direction is reversed" will be resolved by changes made to the upcoming
release of our NX 9.0 documentation. The Replace Face command has not worked as
described in the documentation for a while. This Documentation page is removed from NX
9.0.If this functionality is needed an ER should be submitted.
2207712
While creating revision for Item the copy as object is not creating for Altrep.
2207729
Siemens PLM believes that the problem you reported where "Label on Parent" does not
move will be resolved by code changes made to the upcoming release of our software NX
9.0.
2207761
The problem where the apply/cancel buttons did not handle the change of the plain
background color properly will be resolved by code changes made to the upcoming release
Siemens PLM believes that the problem you reported where inconsistent result when "&"
operator is used in Expressions will be resolved by code changes made to the upcoming
release of our software NX 9.0 Prior to NX 3, we solely relied on the ESS as the expression
engine. It only allowed Numbers so 1&1 was valid. In NX 3, we integrated another evaluation
engine called KF. It has many different data types and only performs && on Booleans. It
would have been best if KF was a strict super set of ESS but it was not. We could not
change ESS due to regressions and we could not change KF due to contractual agreements
with the thrid party. You are seeing one of those differences. Your expression C is what we
call a KF expression and it is complaining that you are trying to perform a logical operation
on Numbers. Kf is a strongly typed language. The overlap between ESS and KF is about
99% but you have landed in the ugly 1% case. A and B are ESS expressions and C is a KF
expression and you are treating Numbers as Booleans. If you edit A directly then you will get
this "nice" error dialog: Datatype error Boolean was found where Number was expected.
Expression: C=A&B To make this more clear a tooltip is added to the Value column for these
"(Error)" values. The specific errors will now also be displayed.
2207902
Siemens PLM believes that the problem you reported where Tool Tips for customer defaults
get truncated in the Japanese environment will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2207908
Siemens PLM believes that the problem you reported where translated Japanese of
"Transform" is incorrect will be resolved by code changes made to the upcoming release of
our software NX 9.0.
2207933
Siemens PLM believes that the problem you reported where [*SYSTEM] is not handled
correctly in the import of Abaqus will be resolved by code changes made to the upcoming
release of our software NX 9.0.
2208124
Siemens PLM believes that the problem you reported where An unnecessary line is
displayed under "Unused Items" folder in PNT will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2208149
The problem where Internal Error occurs when using Basic Curve will be resolved by code
changes made to the upcoming release of our software NX 9.0. We request the customer to
use Sketch Curves or Associative Basic Curves to work around these problems.
2208179
Siemens PLM believes that the problem you reported where the Assemblies toolbar buttons
are not correctly enabled after entering, then leaving the Advanced Simulation application
will be resolved by code changes made to the upcoming release of our software NX 9.0.
2208184
Siemens PLM believes that the problem you reported where prblem of displaying Pillar on
ShipGrid will be resolved by code changes made to the upcoming release of our software
NX 9.0.
2208249
Siemens PLM believes that the problem you reported where processing time is greatly
increased by update of bolt connection model will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2208347
Siemens PLM believes that the problem you reported where nearest point is not recognized
correctly will be resolved by code changes made to the upcoming release of our software NX
9.0.
2208412
Siemens PLM believes that the problem you reported where ""Suppress By Expression"
feature is displayed when unsuppressed feature group" will be resolved by code changes
made to the upcoming release of our software NX 9.0.
2208524
Siemens PLM believes that the problem you reported where the sketch curve returns to its
previous layer while using "Direct Edit" will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2208557
2208569
Siemens PLM believes that the problem you reported where "Can't select Reference Sketch
Curve in "Point on Curve" option [Motion]" will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2208589
Siemens PLM believes that the problem you reported where the FTK list function has round
off difference vs edit data (ie. list window)will be resolved by code changes made to the
upcoming release of our software NX Advanced Simulation, version 9.0.
2208605
Siemens PLM believes that the problem you reported about inconsistency of"bolt creation" in
the geometry having without holes & non planar surface will be resolved by code changes
made to the upcoming release of our software NX 9.0.
2208696
Siemens PLM believes that the problem where the selection color filter did not get reset
when changing displayed parts while in the Drafting application is fixed in NX 9.0.
2208710
Siemens PLM believes that the problem you reported where Inconsistent behavior of
DeleteUndoMarksSetInTaskEnvironment in block styler will be resolved by code changes
made to the upcoming release of our software NX 9.0.
2208744
Siemens PLM believes that the problem you reported where an arrow of note does not move
will be resolved by code changes made to the upcoming release of our software NX 9.0.
2208799
Siemens PLM believes that the problem you reported where file size becomes large will be
resolved by code changes made to the upcoming release of our software NX 9.0 Please run
Part Cleanup after loading the part and save the part. The part size will be reduced a lot.
2208806
Siemens PLM believes that the problem you reported where the spun outline functionality for
the given part produces interpolated lines instead of an arc on a fillet will be resolved by
code changes made to the upcoming release of our software NX 9.0.
2208847
Siemens PLM believes that the problem you reported where some visible face not selected
when [Allow Multi-select of Hidden Faces] is OFF when using [Edit]--[Selection]--[Select All]
will be resolved by code changes made to the upcoming release of our software NX 9.0.
2208858
2208860
Siemens PLM believes that the problem you reported where Line font gets changed when a
cgm is imported to NX will be resolved by code changes made to the upcoming release of
our software NX 9.0.
2208876
Siemens PLM believes that the problem you reported where "Cleanup Utility" command
doesn't work in NX 8.5 will be resolved by code changes made to the upcoming release of
our software NX9.0. The problem where the graphics for the Cleanup Utility command
needed to be updated is fixed in NX 9.0 Sheet Metal help.
2208905
Siemens PLM believes that the problem you reported where "Load as Saved" of assembly
load options is not working properly will be resolved by code changes made to the upcoming
release of our software NX 9.0.
2208961
Siemens PLM believes that the problem you reported where preview function does not work
for BIW Locator will be resolved by code changes made to the upcoming release of our
software NX 9.0. The problem with the "Preview Toggle" in the Datum Surface Locator and
Datum Pin Locator has been resolved. The "preview" is only the point handle for the desired
location. The "Preview Toggle" has been removed. The "Preview Toggle" was not an option
intended to be available for these commands and therefore have it has been removed.
2209032
Siemens PLM believes that the problem you reported about the few advanced simulation
icons are vanished in i_prt "displayed & work" will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2209036
Siemens PLM believes that the problem you reported where Unable to remove the
parameter of feature "Screw Hole Series" will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2209103
2209253
Siemens PLM believes that the problem you reported where "Crosshatch of a Detail View
created from a "Break-Out Section View" is not updated, although crosshatch of Break-Out
Section View was made un-displaying will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2209298
Siemens PLM believes that the problem you reported where we cannot project curves to
planar face will be resolved by code changes made to the upcoming release of our software
NX 9.0.
2209302
2209470
Siemens PLM believes that the problem you reported about "locked and update pending"
status of simulation navigator was corrected in the documentation as follows in the upcoming
release of our software NX 9.0 version of the online help library. The text in the online help
article "Locking and Unlocking a Mesh" has been updated to indicate that the Simulation
Navigator status will read simply "Locked," rather than "Locked and Update Pending"
following a manual operation. Thank you for bringing this issue to our attention.
2209471
Siemens PLM believes that the problem you reported where the old part file cannot be
opened will be resolved by code changes made to the upcoming release of our software NX
9.0. The problem where bad data in a Kanji entity would prevent retrieving a part has been
fixed. The data is now just ignored, but part retrieval continues.
2209538
Siemens PLM believes that the problem you reported where The gap between the
dimension and dimension line increases unnecessarily will be resolved by code changes
made to the upcoming release of our software NX 9.0.
2209563
Siemens PLM believes that the problem you reported where Machining Tolerance is
displayed in PMI "Surface Finish" of JIS will be resolved by code changes made to the
upcoming release of our software NX 9.0. Work around to get rid of the issue is mentioned
below. Under "Machining(e)" column which is blank a "Space" is added in the column.
Remove that space the machining tolerance is not displayed.
2209617
Siemens PLM believes that the problem you reported where the description of the
SetFitMethods() is not clear will be resolved by code changes made to the upcoming release
Siemens PLM believes that the problem you reported where user can not create point by
[Project] will be resolved by code changes made to the upcoming release of our software NX
9.0.
2209767
Siemens PLM believes that the problem you reported where view boundary was getting
changed in history free mode, when launching the drafting SFS dialog will be resolved by
code changes made to the upcoming release of our software NX 9.0.
2209769
Siemens PLM believes that the problem you reported where Update Warning of SB Convert
to Sheet Metal is displayed every time when we make current feature after SB Convert to
Sheet Metal will be resolved by code changes made to the upcoming release of our software
NX 9.0.
2209780
Siemens PLM believes that the problem you reported where Face disappears by Optimize
Face will be resolved by code changes made to the upcoming release of our software NX
9.0. This problem is due to parasoild and we have fixed it in a new parasolid version which
only can put in NX 9.0 for version control. The part file has been fixed, and ready to provide
the fixed part for NX 8.5.
2209797
Siemens PLM believes that the problem you reported about the incorrect tooltip for the
pinned constraint will be resolved by code changes made to the upcoming release of our
software NX 9.0.
2209819
Siemens PLM believes that the problem you reported where PMI of PNT cannot be
expanded, and NX hangs will be resolved by code changes made to the upcoming release
of our software NX 9.0.
2209831
Siemens PLM believes that the problem you reported where export parasolid fails with error
extracting or deleting persistent data for body will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2209840
All faces are not selected with [Allow Multi-select of Hidden Faces]:OFF
2209851
Siemens PLM believes that the problem you reported where the log file name and location
for CAM Batch Processing are incorrect will be resolved by code changes made to the
upcoming release of our software NX 8.5.1 MP3 and NX 9.0 ip16.
2209881
Siemens PLM believes that the problem you reported where more information was required
for the "Thickness" function of the MetaForm command will be resolved by code changes
made to the upcoming release of our software NX 9.0.
2209912
Siemens PLM believes that the problem you reported where exporting the SIM file from
Teamcenter will not export the Master Part and Idealized Part, will be resolved by code
changes made to the upcoming release of our software NX 9.0.
2209926
Siemens PLM believes that the problem you reported where Edge Blend setting option
details are missing in documentation will be resolved by code changes made to the
upcoming release of our software NX 9.0. Added the following text to the Edge Blend options
table Help:
Patch Areas of Complex Geometry
Examines selected blend edges for areas of possible failure due to tight curvature or
complex topology. If areas are detected that will fail, partial blends of limited data are created
and patches automatically created between them. This option relieves users from having to
manually create small blend segments and bridging patches in order to blend a complex
area that would not normally support an edge blend.
See also the Limit Blend to Avoid Failure Areas option.
Limit Blend to Avoid Failure Areas
When selected, blends are limited to avoid areas that cannot be blended, with or without
patching, depending on the setting of this option and the Patch Areas of Complex Geometry
option. A table is also included in the online help for this option showing the four possible
outcomes the user will get depending on the combination of selection or cleared status for
the "Patch Areas of Complex Geometry" and the "Limit Blend to Avoid Failure Areas"
options.
2209979
Siemens PLM believes that the problem you reported where "The value of the Diameter
Dimension of 2D-centerline will change" will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2209996
Siemens PLM believes that the problem you reported where highlight remains at the time of
STEP export will be resolved by code changes made to the upcoming release of our
software NX 9.0.
2210028
Siemens PLM believes that the problem you reported where "Maximum Facet Size" is not
getting reset,When a facet parameter is reset will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2210034
Siemens PLM believes that the problem you reported where an alert is displayed when jog is
added to the leader will be resolved by code changes made to the upcoming release of our
software NX 9.0.
2210185
Siemens PLM believes that the problem you reported where update mark does not display to
drawing view will be resolved by code changes made to the upcoming release of our
software NX 9.0.
2210254
2210269
Siemens PLM believes that the problem you reported where "Customer Default > Analysis >
Modeled Part Validation > Information > in Metric is not showing correct unit" is fixed in NX
9.0.
2210432
Siemens PLM believes that the problem you reported where "Solid Silhouette Curve" unselectable from view if "Curve" is selected in 'Selection Filter' will be resolved by code
changes made to the upcoming release of our software NX 9.0.
2210503
2210536
Siemens PLM believes that the problem you reported where you couldn't open 2 assemblies
will be resolved by code changes made to the upcoming release of our software NX 9.0.
2210553
Siemens PLM believes that the problem you reported where transform does not translated
properly in Japanese will be resolved by code changes made to the upcoming release of our
software NX 9.0.
2210568
2210584
Siemens PLM believes that the problem you reported where Suppress & Un-suppress
causes a change in sketch shape will be resolved by code changes made to the upcoming
release of our software NX 9.0.
2210661
Siemens PLM believes that the problem you reported where,after "Durability Wizard" run
some commands don't work when we clone the solution will be resolved by code changes
made to the upcoming release of our software NX 9.0
2210681
Siemens PLM believes that the problem you reported where NX hangs showing no reactions
while performing project curve in sketch will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2210743
Siemens PLM believes that the problem you reported where "Profile Cut-out fails when
profiles are created from non flat surface" will be resolved by code changes made to the
upcoming release of our software NX 9.0 and next MP release of NX 8.5.2.
2210745
Siemens PLM believes that the problem you reported where there was inconsistency of
reordering feature from NX 6 onwards will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2210825
Signal 11 error while re-executing the same program through toolbar icon.
2210850
Siemens PLM believes that the problem you reported where Max principal stress is wrong
when displayed through "Set Results" will be resolved by code changes made to the
upcoming release of our software NX 9.0
2210988
Siemens PLM believes that the problem where ""Marker Type" and "Unattached Marker
Type" of [Model Display]dialog don't work will be resolved by code changes made to the
upcoming release of our software NX 9.0. In prior releases, the work-around is to perform a
"View, Operation, Regenerate Work" command to redraw the graphics.
2210989
Siemens PLM believes that the problem you reported where executing "Scalar Force"
command without a value,it is set "-777777" as default will be resolved by code changes
made to the upcoming release of our software NX 9.0.
2211008
Siemens PLM believes that the problem you reported where Journal replay fails while
creating an Edge Blend in History-Free Mode will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2211012
Siemens PLM believes that the problem you reported where NX hangs while running
NX/post with OOTB millturn post will be resolved by code changes made to the upcoming
release of our software NX 9.0 ip14.
2211037
Siemens PLM believes that the problem you reported where Signal 11 error while reexecuting the same program through toolbar icon will be resolved by code changes made to
the upcoming release of our software NX 9.0.
2211287
Siemens PLM believes that the problem you reported where undo list is not updating after
reopen part will be resolved by code changes made to the upcoming release of our software
NX 9.0.
2211288
Siemens PLM believes that the problem you reported where the Interpart link browser filter is
ON, but the macro result is incorrect will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2211314
Siemens PLM believes that the problem you reported where Cut Below Last Range requires
more documentation will be resolved by code changes made to the upcoming release of our
software NX 9.0 ip19.
2211424
Siemens PLM believes that the problem you reported where an internal error may be
encountered when performing an expanded display on a bolt pre-load will be resolved by
code changes made to the upcoming release of our software NX 9.0.
2211428
Siemens PLM believes that the problem you reported where line font is changed by Delete
selected Erasures in View dependent edit will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2211446
Siemens PLM believes that the problem you reported about the display of Distance option in
"Translate" UI dialog will be resolved by code changes made to the upcoming release of our
software NX 9.0.
2211461
2211490
2211493
Siemens PLM believes that the problem you reported where incorrect translation for the
menu on "Peltier Cooler" dialog will be resolved by code changes made to the upcoming
release of our software NX 9.0.
2211528
Siemens PLM believes that the problem you reported where CONTA178 cannot be created
by "contact mesh" command will be resolved by code changes made to the upcoming
release of our software NX 9.0.
2211545
2211620
Siemens PLM believes that the problem you reported where Divided tool path becomes
"Regenerate" status when the tool is changed will be resolved by code changes made to the
upcoming release of our software P9.0/phase 13.
2211639
Siemens PLM believes that the problem you reported where Inputting -1.000 in Distance
causes the collision tool path will be resolved by code changes made to the upcoming
release of our software NX 9.0.
2211645
"Table data" does not display in the column of "Manage Materials" dialog.
2211659
Siemens PLM believes that the problem you reported where Insufficient documentation on
the property of 2D Mesh and 3D Tetrahedral Mesh is documented in NX9. For "cylinder
curved end num elements" property following has been found. There was a problem in
creating documentation for initially hidden properties like this one. They are valid upon
certain selection or other property combinations. Now user can find documentation for these
properties in NX 9.0. For properties like "mesh time stamp" following has been found. These
are internal properties and user is not required to set them. From NX 9.0, onwards user
should only set properties which are present in NX Open documentation. Also, rule of thumb
is to set properties which are only visible in mesher dialog.
2211706
Siemens PLM believes that the problem you reported where Principal Stress Tensor display
was wrong when using selected coordinate system will be resolved by code changes made
to the upcoming release of our software NX 9.0.
2211817
Siemens PLM believes that the problem you reported where the dialog is closed when the
negative value is inputted into "Increment" twice will be resolved by code changes made to
Siemens PLM believes that the problem you reported where "the part cannot be loaded" will
be resolved by code changes made to the upcoming release of our software NX 9.0.
2212014
Siemens PLM believes that the problem you reported about non support of Laminate 2D-to3D Extrusion in MSC Nastran environment is working as desired. This was a mistake in NX
8.5 documentation and now our Documentation team had updated and fixed this in NX 9.0
documentation.
2212060
Siemens PLM believes that the problem you reported where Node of 1D mesh cannot be
selected on 'identify' dialog will be resolved by code changes made to the upcoming release
of our software NX 9.0.
2212073
Siemens PLM believes that the problem you reported where Assembly Clearance results
shows the interference line wrongly will be resolved by code changes made to the upcoming
release of our software NX 9.0.
2212113
Siemens PLM believes that the problem you reported where expression for parabolic load
variations of bearing load will be resolved by code changes made to the upcoming release of
our software NX 9.0.
2212118
Siemens PLM believes that the problem you reported where edit positioning of "Pre-NX5
Hole" cannot select arc as target will be resolved by code changes made to the upcoming
release of our software NX 9.0.
2212120
Siemens PLM believes that the problem you reported where "Allow Taper Angle" option
described in NX Documentation is not present in NX will be resolved by code changes made
to the upcoming release of our software NX 9.0. The problem where there was an extra
option described in NX 8.5 Documentation has been fixed in NX 9.0.
2212180
Siemens PLM believes that the problem you reported where opening drawing made by NX
7.5.3 in NX 8.0.3, resulting change of reference of some dimensions will be resolved by code
changes made to the upcoming release of our software NX 9.0.
2212208
Siemens PLM believes that the problem you reported where "Silhouette Flange preview
function does not work" will be resolved by code changes made to the upcoming release of
our software NX 9.0.
2212302
2212311
Siemens PLM believes that the problem you reported where NXOpen.CAE > MeshManager
> CreateMesh3dTetBuilder () causes an error will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2212352
Siemens PLM believes that the problem you reported where creating variant configuration in
electrical routing and disabling the "Enable configuration" gives internal error will be resolved
by code changes made to the upcoming release of our software NX 9.0.
2212430
Siemens PLM believes that the problem you reported where Welding Joint is created
incorrectly by skipping an edge to be selected as Master Edge will be resolved by code
changes made to the upcoming release of our software NX 9.0. The resolution of this PR
comes in two parts. First, this is really a butt weld case. When using the automatic method
the faces where the joint is to be located should be attributed with
MK_TYPE=MOLDINGLINE. If they are not attributed properly you get unpredictable results.
After the faces are properly attributed, all of the edges will be found in NX 9.0.
2212431
Siemens PLM believes that the problem you reported where Welding Joint by Inferred option
causes an error if there is gap between parts will be resolved by code changes made to the
upcoming release of our software NX 9.0. In NX 9.0, an option has been added to the
welding joint dialog under the "Settings" group called "Maximum Face Gap". This option will
allow you to enter a number that will be used by the automatic method in order to find
welding joints between faces that do not touch. The case described in this PR will now work
if you enter a Maximum Face Gap value larger than 2.0.
2212472
2212477
Siemens PLM believes that the problem you reported where Recorded journal code for EditSketch Curve-Quick Trim does not compile will be resolved by code changes made to the
upcoming release of our software NX 9.0. The following has been found. The user is
expected to use BoundaryObjects and not BoundaryCurves to specify the boundaries
starting NX 9.0.
2212489
2212557
Siemens PLM believes that the problem you reported where the assembly constraints
converted from mating conditions can't be redefined will be resolved by code changes made
to the upcoming release of our software NX 9.0.
2212566
Siemens PLM believes that the problem you reported where creation of a projected view
fails with "Modeler error occurred when updating hidden line display" error will be resolved
by code changes made to the upcoming release of our software NX 9.0
2212587
2212645
2212651
Siemens PLM believes that the problem you reported where"Specific dotted lines of the
drawing sheet become hiding when using zoom"will be resolved by code changes made to
the upcoming release of our software NX 9.0.
2212661
2212697
2212855
Siemens PLM believes that the problem you reported where user cannot create TB lines into
right position will be resolved by code changes made to the upcoming release of our
software NX 9.0.
2212862
Siemens PLM believes that the problem you reported where "Dimensions relation not
restored in NX 8" will be resolved by code changes made to the upcoming release of our
software NX 9.0.
2212879
Siemens PLM believes that the problem you reported where inadequate error handling for
wrong AssocType in NXOpen>Sketch >CreateDimension will be resolved by code changes
made to the upcoming release of our software NX 9.0. The dimension creation interface has
changed in NX 9.0. In NX 9.0, the users are expected to use dimension builders to create
the dimensions.
2212903
2212948
Siemens PLM believes that the problem you reported where "Element Labels" is not grayed
out for he commands [Insert]-[Element]-[Extrude] & [Insert]-[Element]-[Revolve] will be
resolved by code changes made to the upcoming release of our software NX 9.0.
2213045
Siemens PLM believes that the problem you reported where Ordinate Dimensions can not
be created will be resolved by code changes made to the upcoming release of our software
NX 9.0. The ordinate set in the part has some corrupt dimensions. Part Cleanup has been
enhanced to fix these dimensions so a new dimension can now be created and added to the
ordinate set.
2213062
Siemens PLM believes that the problem you reported where Cannot create "Flat Solid" will
be resolved by code changes made to the upcoming release of our software NX 9.0.
Note: please update the Convert to sheet metal feature, either by supress/unsuppress, or
playback, then Flat solid will work as expected.
2213072
Siemens PLM believes that the problem you reported where out of date documentation for
the Java requirement is fixed in release NX 9.0. The NX 8.5 documentation cannot be
updated. However, a caveat will be added to the NX 8.5.3 release notes with this details.
2213107
Siemens PLM believes that the problem you reported where the sequence number of curve
which was chosen last will appear on WCS origin will be resolved by code changes made to
the upcoming release of our software NX 9.0.
2213108
Siemens PLM believes that the problem you reported where Column names and its options
are not getting displayed in Japanese language will be resolved by code changes made to
the upcoming release of our software NX 9.0
2213153
Siemens PLM believes that the problem you reported where "A collision occurs between
separated bodies when executing assembly clearance." will be resolved by code changes
made to the upcoming release of our software NX 9.0.
2213154
Siemens PLM believes that the problem you reported where "Fully Open Component from
Teamcenter" is not displayed on Teamcenter will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2213174
2213454
Siemens PLM believes that the problem you reported where no relief plunge was made for
the final rough cut in a groove will be resolved by code changes made to the upcoming
release of our software NX 9.0.
2213458
Siemens PLM believes that the problem you reported where file size becomes large will be
resolved by code changes made to the upcoming release of our software NX 9.0
2213469
Siemens PLM believes that the problem you reported where "feature play back leads to over
constrained in NX 8.0.3" will be resolved by code changes made to the upcoming release of
our software NX 9.0.
2213500
Siemens PLM believes that the problem you reported where you get error when you operate
"Mirror Feature" in NX 8 will be resolved by code changes made to the upcoming release of
our software NX 9.0.
2213602
Siemens PLM believes that the problem you reported where "M" value of Customer Defaults
is not reflected in preferences annotation will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2213679
Siemens PLM believes that the problem you reported where insufficient Documentation for
measurement builders has been updated in documentation of NX.9. Basically the various
builders are only used internally by NX for measurement and are not needed for external
programming. Use the MeasureManager routines like NewFaceProperties,
NewMassProperties in order to create measurements.
2213759
2213768
Siemens PLM believes that the problem you reported where the custom symbols disappear
when exported as 2D part by 2D exchange will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2213944
Siemens PLM believes that the problem you reported where Ballon cannot be imported will
be resolved by code changes made to the upcoming release of our software NX 9.0
2214132
Siemens PLM believes that the problem you reported where there is no explanation of
Rotary angle and Tool Axis under Linerization Interpolation will be resolved by code changes
made to the upcoming release of our software NX 9.0 ip18.
2214491
Playing DLL from toolbar when another program is running causes internal error.
2214526
Siemens PLM believes that the problem you reported where SetTaggedObjectVector()
throws exception in Select Element Block when zero object will be resolved by code
changes made to the upcoming release of our software NX 9.0.And The Block UI Styler
documentation has been updated.
2214577
Siemens PLM believes that the problem you reported where "The size of the note in Custom
Symbol is changed by changing spacing factor" will be resolved by code changes made to
the upcoming release of our software NX 9.0.
2214720
Siemens PLM believes that the problem you reported where "a part of Named
References(motion) is lost in cloned Item Revision" will be resolved by code changes made
to the upcoming release of our software NX 9.0.
2214737
Siemens PLM believes that the problem you reported where Pillar's face has no attribute will
be resolved by code changes made to the upcoming release of our software NX 9.0.
2214837
Siemens PLM believes that the problem you reported where Specify size reverts to the
default after running "CutOut" will be resolved by code changes made to the upcoming
release of our software NX 9.0.
2214876
Siemens PLM believes that the problem you reported where inconsistent behavior of
ExamineGeometry>GetFailedObjects()will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2214972
Siemens PLM believes that the problem you reported where "I execute Transition after I
create Edge Rein, Component doesn't output" will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2215044
Siemens PLM believes that the problem you reported where journal does not support
Preferences > Drafting command fully will be resolved by code changes made to the
upcoming release of our software NX 9.0, with the changes introduced to the Drafting
Preferences (new block-based dialogs): Drafting Preferences -> General/Setup -> Workflow
-> Model-based preferences.
2215092
Siemens PLM believes that the problem you reported where UF_DRAW_ask_views() returns
no of view as 4 once the View Break is created will be resolved by code changes made to
the upcoming release of our software NX 9.0.
2215187
Siemens PLM believes that the problem you reported where "Arrangement views are
removed in drawing sheet" will be resolved by code changes made to the upcoming release
of our software NX 9.0.
2215189
Siemens PLM believes that the problem you reported about the short edge creation and the
mesh distortion due to that will be resolved by code changes made to the upcoming release
of our software NX 9.0 For pre NX 9.0 the workaround would be for the user to remove the
removable Short edge vertex by merge edges and then the FE update shows a correct
mesh.
2215291
Siemens PLM believes that the problem you reported where "linked Composite Curve with
fix at current time-stamp does not show the features" will be resolved by code changes
made to the upcoming release of our software NX 9.0 ip12.
2215312
Siemens PLM believes that the problem you reported where "In" of "In Engine_System" is
translated to the wrong Japanese word which means "Inch" on N X8.5.1 will be resolved by
code changes made to the upcoming release of our software NX 9.0.
2215371
[ER] User want to change the Japanese name of the function in material library.
2215470
Siemens PLM believes that the problem you reported where macro played back at NX
startup and caused a bad focus to a non visible windows (thus, the F3 didn't work) since the
window used the F3 key, will be resolved by code changes made to the upcoming release of
our software NX 9.0.
2215505
Siemens PLM believes that the problem you reported where Stifeener does not affect the
thickness of the other member will be resolved by code changes made to the upcoming
release of our software NX 9.0.
2215654
Siemens PLM believes that the problem you reported where "Attribute value is present in
ANT even after clearing attribute value in Teamcenter" will be resolved by code changes
made to the upcoming release of our software NX 9.0.
2215689
Siemens PLM believes that the problem you reported where tabular note/part list are
displayed in type filter while adding new Group will be resolved by code changes made to
the upcoming release of our software NX 9.0.
2215716
Siemens PLM believes that the problem you reported where portions of dialog memory was
not updated in leader lists will be resolved by code changes made to the upcoming release
of our software NX 9.0.
2215722
NX 8.5.2 iTest: Line color becomes gray after "Delete Selected Erasures".
2215757
Siemens PLM believes that the problem you reported where "Can't import STEP file to NX,
Step file include Attribute" will be resolved by code changes made to the upcoming release
of our software NX 8.5.3, NX 9.0 and above.
2215766
Siemens PLM believes that the problem you reported where the Japanese translation of
"Special Data Conditions" will be resolved by code changes made to the upcoming release
of our software NX 9.0.
2215811
No "out of date" mark in ANT even though original & deformed part different.
2215823
Siemens PLM believes that the problem you reported where "Model Size" setting in
"Visualization Performance Preferences" is not remembered will be resolved by code
changes made to the upcoming release of our software NX 9.0.
2215833
Siemens PLM believes that the problem you reported where "Components are loaded when
the name of the Reference Set is changed" will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2215889
Siemens PLM believes that the problem you reported where "Turn on "Extend at edge"
cause unnecessary gaps in tool path " will be resolved by code changes made to the
upcoming release of our software NX 9.0.16 CAM_nx9.2013063000.
2215892
2215934
Siemens PLM believes that the problem you reported where Modified mark shows up
suddenly when out of date property column is added in ANT will be resolved by code
changes made to the upcoming release of our software NX 9.0.
2216114
Siemens PLM believes that the problem you reported where the Part Navigator replaces a
cached attribute's value instead of overriding will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2216129
Siemens PLM believes that the problem you reported where DXF translated from NX
8.5,cannot open in autocad. will be resolved by code changes made to the upcoming release
of our software NX 9.0.
2216225
Siemens PLM believes that the problem you reported where Environment Variable
"UGII_UPDATE_ALL_ID_SYMBOLS_WITH_PLIST=1" is invalid will be resolved by code
changes made to the upcoming release of our software NX 9.0.
2216262
Siemens PLM believes that the problem you reported where the sketch in drafting is losing
its coincident constraint after view update will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2216440
Siemens PLM believes that the problem you reported where "Have set the cut depth=0.1mm
and cavity mill cut 4.5 mm at a time"will be resolved by code changes made to the upcoming
release of our software NX 9.0. The tool path of the cavity milling operation with follow
periphery pattern-inward, island cleanup=on, wall cleanup=on is regenerated correctly such
that the island cleanup passes are created and material is removed correctly at every level.
It's fixed in NX 9.0 ip13. Note: The island shape in this pr is a mix of part and trim segments
(from trim boundaries).
2216463
Siemens PLM believes that the problem you reported where "Diameter Reference" is
missing after exporting to DXF will be resolved by code changes made to the upcoming
release of our software NX 9.0.
2216514
2216540
Siemens PLM believes that the problem you reported where the text and circle cannot be
deleted will be resolved by code changes made to the upcoming release of our software NX
9.0 User tries to select entities which are custom symbol member. These entities should not
be allowed to select. Added fix in part cleanup in NX 9.0 Do following steps to fix the issue.
1. Launch NX 9.0.
2. Open provided part.
3. Go to File -> Utilities -> Part Cleanup.
4. Toggle ON Clean Drafting Objects.
5. Hit Ok.
6. Now user can select the custom symbol and it can be deleted.
2216596
Siemens PLM believes that the problem you reported where default tolerance value, does
not show in 'Offset Surface' feature for the first use, will be resolved by code changes made
to the upcoming release of our software NX 9.0.
2216627
2216638
Siemens PLM believes that the problem you reported where the Japanese translation of
"Stock" will be corrected on the upcoming release of our software NX 9.0.
2216684
Siemens PLM believes that the problem you reported where can't get the slave view
associated with point will be resolved by code changes made to the upcoming release of our
software NX 9.0.
2216807
Siemens PLM believes that the problem you reported where circular cutout is created with
very smaller diameter than the specified diameter will be resolved by code changes made to
the upcoming release of our software NX 9.0.
2216921
2217027
Siemens PLM believes that the problem you reported where Help document is not updated
correctly "From Point Cloud" will be resolved by code changes made to the upcoming
release of our software NX 9.0.
2217076
Siemens PLM believes that the problem you reported where using the [Match Edge] certain
conditions it can not match the edge will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2217087
Siemens PLM believes that the problem you reported where Note leader shifts its position
when drawing is updated will be resolved by code changes made to the upcoming release of
our software NX 9.0.
2217111
Siemens PLM believes that the problem you reported where the size of a View Break line
changes will be resolved by code changes made to the upcoming release of our software NX
9.0.
2217112
Siemens PLM believes that the problem you reported where "Error of Trim and Extend
displayed if playback the data of NX 7.5 in NX 8.5" will be resolved by code changes made
to the upcoming release of our software NX 9.0.
2217125
Siemens PLM believes that the problem you reported where Extrude is unable to draft if
playback the data of NX 7.5 in NX 8.5, will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2217126
Siemens PLM believes that the problem you reported where "Error of Extrude when
playback the data of NX 7.5 in NX 8.5" will be resolved by code changes made to the
Siemens PLM believes that the problem you reported where Vector of Datum CS is changed
if playback the data of NX 7.5 in NX 8.5, will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2217130
Siemens PLM believes that the problem you reported where "A part of curve is lost if
playback the data of NX 7.5 in NX 8.5" will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2217143
Siemens PLM believes that the problem you reported where associative "Distance
Measurement" are deleted will be resolved by code changes made to the upcoming release
of our software NX 9.0.
2217195
Siemens PLM believes that the problem you reported where Zlevel Depth per Cut value
cannot be changed will be resolved by code changes made to the upcoming release of our
software NX 9.0 ip13.
2217208
Siemens PLM believes that the problem you reported where COM error 80010100 occurs
when the user creates part family members will be resolved by code changes made to the
upcoming release of our software NX.9.0.
2217230
Siemens PLM believes that the problem you reported where position of GDT symbol is
changed after drawing update will be resolved by code changes made to the upcoming
release of our software NX 9.0.
2217286
Siemens PLM believes that the problem you reported where the direction of principal stress
tensor changes with reference CSYS will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2217318
Siemens PLM believes that the problem you reported where NX spends many time to export
.dat will be resolved by code changes made to the upcoming release of our software NX 9.0.
2217334
Siemens PLM believes that the problem you reported where Class selection dialog display
slave views inside view break will be resolved by code changes made to the upcoming
release of our software NX 9.0.
2217342
Siemens PLM believes that the problem you reported where Slave views can be selected
wrongly by UF_UI_select_with_single_dialog() will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2217400
Siemens PLM believes that the problem you reported where assembly constraint component
position is not updated after moving geometry will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2217472
Siemens PLM believes that the problem you reported where "Body face color is changing
after boolean operation [Intersect]" will be resolved by code changes made to the upcoming
release of our software NX 9.0.
2217561
Siemens PLM believes that the problem you reported where the drawing file cannot be
updated will be resolved by code changes made to the upcoming release of our software NX
9.0.
2217610
Siemens PLM believes that the problem you reported where fine element (small) is made by
3D Tet Mesh in NX 8.5.1 on comparing with NX 7.5.3.3 will be resolved by code changes
Siemens PLM believes that the problem you reported where Insufficient tool path extension
occurs by Extend at Edge will be resolved by code changes made to the upcoming release
of our software NX 9.0 and NX 8.5.3.
2217613
Siemens PLM believes that the problem you reported where "The result of the fillet varies
when change the order of choices" will be resolved by code changes made to the upcoming
release of our software NX 9.0.
2217628
Siemens PLM believes that the problem you reported where "The item which copied on TC
is not displayed by Open Part File list" will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2217642
Siemens PLM believes that the problem you reported where the performance of "Flat Solid"
on NX.8.5.1 is slower than NX.8.0.3 will be resolved by code changes made to the upcoming
release of our software NX.9.
2217737
Siemens PLM believes that the problem you reported where Assembly Load Options
dialogue box is glabled in Japanese NX will be will be corrected on the upcoming release of
our software NX 9.0.
2217779
Siemens PLM believes that the problem you reported where associative Datum CSYS is not
moving along with component will be resolved by code changes made to the upcoming
release of our software NX 9.0.
2217812
Siemens PLM believes that the problem you reported where File name is displayed as
"DB_SEED_PART_USED" will be resolved by code changes made to the upcoming release
of our software NX 9.0.
2217815
Siemens PLM believes that the problem you reported where Bomview is the status of checkout when ugpart is opened will be resolved by code changes made to the upcoming release
of our software NX 8.5.3.
2218049
2218125
Siemens PLM believes that the problem you reported where some of the NX curves are not
outputted to CGM file will be resolved by code changes made to the upcoming release of our
software NX 9.0 and the part file need version up or saved in NX 9.0.
2218202
Siemens PLM believes that the problem you reported where the information display for angle
measurement using a vector during design in context will be resolved by code changes
made to the upcoming release of our software NX 9.0.
2218212
Siemens PLM believes that the problem you reported where after intersection the resulted
body is different from the target body will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2218410
Siemens PLM believes that the problem you reported where "Extend at Edge" causes
disconnected tool path motions will be resolved by code changes made to the upcoming
release of our software NX 9.0 ip16
2218588
Siemens PLM believes that the problem you reported where Circle in a sketch disappears
when diameter is edited will be resolved by code changes made to the upcoming release of
our software NX 9.0.
2218609
2218678
Siemens PLM believes that the problem you reported where automatic Face pair
inconsistent after 'move object in MS-Face Pair creation will be resolved by code changes
made to the upcoming release of our software NX 9.0.
2218869
Siemens PLM believes that the problem you reported where NX cannot copy visualization
materials correctly will be resolved by code changes made to the upcoming release of our
software NX 9.0.
2218886
Siemens PLM believes that the problem you reported where pre-selected objects will not get
de-selected from the part navigator in NX.8.5.1 will be resolved by code changes made to
the upcoming release of our software NX 9.0.
2218942
Siemens PLM believes that the problem you reported where Display of Distance Tolerance
does not disappear in the [Intersection Curve] will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2218943
2219019
Siemens PLM believes that the problem you reported where Description of new options
added to 'Part Cleanup' is not available, will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2219050
Siemens PLM believes that the problem you reported where though there is no Routing
BOM dialog box, the documentation mentions about it will be resolved by removing the
irrelevant texts to the upcoming release of our software documentation NX 9.0.
2219071
Siemens PLM believes that the problem you reported where a dividing edge is automatically
added to polygon face with a hole will be resolved by code changes made to the upcoming
release of our software NX 9.0.
2219153
Siemens PLM believes that the problem you reported where "Can't Trim body it fail with
Error Thru face does not intersect path of the tool" will be resolved by code changes made to
the upcoming release of our software NX 9.0.
2219252
Siemens PLM believes that the problem you reported where Operation of layer setting is
canceled by Finish Sketch from STE will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2219280
Siemens PLM believes that the problem you reported where "Deformation" settings differ by
results of the output will be resolved by code changes made to the upcoming release of our
software NX 9.0.
2219367
Siemens PLM believes that the problem you reported where NX Documentation is not
updated on setting up electrical data with Teamcenter will be resolved by Documentation
update to the upcoming release of our NX 9.0 Documentation.
2219443
Siemens PLM believes that the problem you reported where Show or Hide on a component
group containing an assembly component did not propagate the Show or Hide operation to
the children of the assembly will be resolved by code changes made to the upcoming
release of our software NX 9.0. A possible work-around for the behavior in NX 8.5 is to use
the popup menu on the assembly component in the Component Group and toggle the
'Include Children' state to On (it will have defaulted to Off when the Component Group was
created), Show/Hide on the Component Group will then Show/Hide all the children as well.
2219487
Siemens PLM believes that the problem you reported where "Point to Point - model depth operation gouges the part" will be resolved by code changes made to the upcoming release
of our software NX 9.0.
2219489
Siemens PLM believes that the problem you reported where "Flange surface don't keep
parameterization in the [Law Extension]." will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2219808
Siemens PLM believes that the problem you reported where UF_SKET_terminate_sketch()
does not terminate sketch properly will be resolved by code changes made to the upcoming
release of our software NX 9.0.
2219876
Siemens PLM believes that the problem you reported where (DB_PART_DESC) is set to the
Item Name in NX 8.0 will be resolved by code changes made to the upcoming release of our
software NX 9.0.
2219903
2219907
Siemens PLM believes that the problem you reported where "Plug/Slot" weld is created at
wrong position in NX 8 will be resolved by code changes made to the upcoming release of
our software NX 9.0.
2219908
Siemens PLM believes that the problem you reported where CFACTOR1 is not output in NX
will be resolved by code changes made to the upcoming release of our software NX 9.0.
2219974
Siemens PLM believes that the problem you reported where user defined CSYS for inertia in
Motion Sim is not associative will be resolved by code changes made to the upcoming
release of our software NX 9.0.
2219986
Siemens PLM believes that the problem you reported where "Alternate ID revision displays
only one revision multiple times in replace component dialog" will be resolved by code
changes made to the upcoming release of our software NX 9.0.
2220416
Siemens PLM believes that the problem you reported where insufficient documentation while
executing Pre/Post action for Finish Sketch has been updated in documentation of NX 9.0.
Following has been found. These three conditions are no longer a problem in NX 9.0:
Enter STE and hit Finish - no longer a problem. An empty sketch is created.
Enter the STE and hit cancel in the create sketch dialog - this is no problem. No sketch is
created. There is no Save command available in the new Ribbon Interface in NX 9.0, so
there is no problem with Saving in the STE. In documentation a note is added that if you Exit
the STE with a modified sketch, NX gives you a warning that you are about to discard
changes.
2220453
Siemens PLM believes that the problem you reported where The function of "Import External
Data" command is not understood will be resolved by code changes made to the upcoming
release of our software NX 9.0. This command is documented in NX 9.0.
2220455
The problem where there was missing information about 'Feature' tab of TC Integration
preferences has been fixed in NX 9.0.
2220476
Siemens PLM believes that the problem you reported where the difference between 'Apply to
Component' and 'Apply to Instance' is not documented will be resolved by changes made to
the upcoming release of NX 9.0 Documentation.
2220902
Siemens PLM believes that the problem you reported where "Executing [Edit Boundary], the
normal direction of sheet body will be reverse." will be resolved by code changes made to
the upcoming release of our software NX 9.0.
2220951
Siemens PLM believes that the problem you reported where LS Dyna results were shown
wrongly while importing in NX post will be resolved by code changes made to the upcoming
release of our software NX 9.0.
2220954
Siemens PLM believes that the problem you reported where "Update work piece cause NX
8.5 stop response" will be resolved by code changes made to the upcoming release of our
software NX 9.0.
2220986
Siemens PLM believes that the problem you reported where "if Molded Part Validation
("ug_prod_des_advisor" licenses) is not present it "cannot return a license that was not
checked out" -Licensing Error. Failed to exit module, it will pop up the license error , even if
you go back to other functions , it will also show license error" has been fixed. The fix has
been submitted to NX 9.0 IP19. The fix will also be submitted to NX 8.5.3 IP3 later.
2221493
Siemens PLM believes that the problem you reported where PdmSearch.Advanced() output
wrong result when search result is not found will be resolved by code changes made to the
upcoming release of our software NX 8.5.3 and NX 9.0.
2221608
2221621
Siemens PLM believes that the problem you reported where "Execution of "Playback" will
change "Surface type" as "B-SURFACE"." will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2221636
Unnecessary line is displayed in PDF after exporting the shaded detail view.
2221683
2221775
2221777
2221909
Siemens PLM believes that the problem you reported where When HD3D is active, move
and rotate of the model is slow will be resolved by code changes made to the upcoming
release of our software NX 9.0.
2221952
Siemens PLM believes that the problem you reported where" In[Curve on Surface],array of
Knots and Poles of the created curve is abnormal" will be resolved by code changes made to
the upcoming release of our software NX 9.0.
2222076
Siemens PLM believes that the problem you reported where NX is not importing a Nastran
dat file with 10 million elements will be resolved by code changes made to the upcoming
release of our software NX 8.5.3 and NX 9.0.
2222117
Siemens PLM believes that the problem you reported where "On assembly, partially shaded
is not reflected properly" will be resolved by code changes made to the upcoming release of
our software NX 9.0.
2222130
Siemens PLM believes that the problem you reported where memory access violation occurs
while executing convert mating conditions will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2222399
NX will crash when click the "length measure" after suppress one sketch.
2222449
Siemens PLM believes that the problem you reported where the behavior of Spline will
become incorrect if Bridge Curve is executed will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2222506
Siemens PLM believes that the problem you reported where the file name of "Source model
results file" became blank for "teamcenter" source will be resolved by code changes made to
the upcoming release of our software NX 9.0.
2222519
Siemens PLM believes that the problem you reported where "FCF" with leader is missing
after importing part will be resolved by code changes made to the upcoming release of our
software NX 9.0.
2222600
Siemens PLM believes that the problem you reported where "Hidden objects are
unexpectedly displayed after Simple Clearance Check" will be resolved by code changes
made to the upcoming release of our software NX 9.0.
2222650
Structure of proximity component group changed when opened under new assembly.
2223070
Siemens PLM believes that the problem you reported where "Measurement tool reserves
last input value" will be resolved by code changes made to the upcoming release of our
software NX 9.0 ip18
2223080
Siemens PLM believes that the problem you reported where drafting annotation can't be
selected for PMI custom symbols is designed as intended. This is clearly stated in the
"Create a new custom symbol" procedure in the PMI Help. If you want to add drafting
annotation to a PMI custom symbol, you must create the symbol on a drawing sheet in the
Drafting application. This note has been added to the overview page for Define Symbols in
NX 9.0.
2223485
NX 8.5 - change the geometry for an operation it moves the operation to the end.
2223487
Siemens PLM believes that the problem you reported where the Japanese translation of
"Both" will be corrected on the upcoming release of our software NX 9.0.
2223490
Siemens PLM believes that the problem you reported where the Japanese translation of
"Show/Remove Constraints" will be corrected on the upcoming release of our software NX
9.0.
2223601
Unite Command takes more time to "unite" and add Views in Drafting of the component.
2223630
Siemens PLM believes that the problem you reported where the translation of 'This is a 5Axis Milling Machine With Dual Rotary Heads' will be resolved by code changes made to the
upcoming release of our software NX 9.0 ip19.
2223967
2224368
2800981
Siemens PLM believes that the problem you reported where the Portuguese installation will
not work due to an invalid "Whats New" path will be resolved by code changes made to the
upcoming release of our software NX 9.0.
2800986
Siemens PLM believes that the problem you reported where starting Tool Path Simulate with
Collision Detect set to Off and then turning it On during the simulation does not cause the
collisions to be detected will be resolved by code changes made to the upcoming release of
our software NX 9.0.
2801524
2801690
2802626
Siemens PLM believes that the problem you reported where saving a file increases it's file
size dramatically, will be resolved by code changes made to the upcoming release of our
software NX 9.0.
3050291
Siemens PLM believes that the problem you reported where Datum Pin size modifiable only
when not using Defaults will be resolved by code changes made to the upcoming release of
our software NX 9.0 The Datum Locator is being retired. It is being replace with the Datum
Surface Locator and Datum Pin Locator. There is a tab the Weld Assistant for Datum Pin
Locator and Datum Surface Locator to specify specific defaults for these commands.
4913060
The problem where the user wanted to know if a property page could be located below other
dialog items is fixed in NX 9.0. The Open UI Styler-> Property Pages Attributes topic has
been updated.
http://lmdbuild/prod/nx9/en_US/deliverableObjects/nx_tdoc_api_collection/index.
html#uid:index_uistyler:ref_objects_ref_obj_ov:ref_objects_ref_obj_at_proppage
5008267
5037713
Siemens PLM believes that the problem you reported where a Datum Callout Leader,
attached to a manual dimension with upper and lower limits and a feature control frame
(FCF), left a gap between the Datum leader and the FCF will be resolved by code changes
made to the upcoming release of our software NX 9.0. Existing annotations with this problem
can be fixed by using version up on the annotation (Preferences > Drafting > General (tab) >
Version Up Selected Drafting Objects).
5075650
The problem where Name would clash with part already known about in this session is fixed
in the release of TCEv9.0 and NX 2.
5082843
Siemens PLM believes that the problem you reported where Contour Area using the 'Extend
at Edges' option is leaving some areas uncut will be resolved by code changes made to the
upcoming release of our software in NX 9.0.
5126044
Siemens PLM believes that the problem you reported where uf_ugmgr.h and the associated
documentation contained incorrect information about the maximum length of strings
representing file identifiers will be resolved by code changes made to the upcoming release
of our software NX 9.0.
5231909
Siemens PLM believes that the problem you reported where it was not possible to apply any
blend to a particular area, will be resolved by code changes made to the upcoming release
of our software NX 9.0. Please note that this blend cannot be completed in a single step
because it contains both concave and convex edges, which means that the left and right wall
normals have to be changed. This should work as two separate face blend operations.
5243180
Siemens PLM believes that the problem you reported where the inconsistent result using
Edge Blend will be resolved by code changes made to the upcoming release of our software
NX 9.0 The existing edge blend must be deleted and a create new one in NX 9.0 to get the
latest software changes for the edge blend.
5565446
Siemens PLM believes that the problem you reported where Unite deletes a body using a
Tube and Spheres will be resolved by code changes made to the upcoming release of our
software NX 9.0.
5609916
5683498
5932984
Siemens PLM believes that the problem you reported where the supplied parts always
opened as modified, will be resolved by code changes made to the upcoming release of our
software NX 9.0.
5973359
5975537
5977820
6037303
6057107
Siemens PLM believes that the problem you reported where Retracts in a Fixed Axis
Surface Contouring operation is not working as intended will be resolved by code changes
made to the upcoming release of our software in NX 9.0.
6064357
Siemens PLM believes that the problem you reported where when editing text, if the "Edit
Text" icon is selected to invoke the complete text editor, the original string is highlighted.
Therefore, if the user starts to type, the original text is replaced rather than appended, will be
resolved by code changes made to the upcoming release of our software NX 9.0.
6073568
Siemens PLM believes that the problem you reported where you were getting an error when
trying to save the part from the manufacturing application will be resolved by code changes
made to the upcoming release of our software NX 9.0.
6116874
Siemens PLM believes that the problem you reported where operations produced by 'divide
by holder' violate the part will be resolved by code changes made to the upcoming release of
our software NX 9.0 ip11. The operation set will now correctly retain the non-cutting moves
in the subsequent splits.
6158329
Siemens PLM believes that the problem you reported where the Save Script operation on
the View Visualization Batch Hidden Line command did not enter an extension to the created
file, if not entered as part of the filename, will be resolved by code changes made to the
upcoming release of our software NX 9.0.
6163002
Siemens PLM believes that the problem you reported where rotating about the Y axis of the
screen followed by OK does not retain the rotated view will be resolved by code changes
made to the upcoming release of our software NX 9.0.
6169788
6192418
Siemens PLM believes that the problem you reported where View Triad display setting in
Preferences does not work will be resolved by code changes made to the upcoming release
of our software NX 9.0.
6224843
Siemens PLM believes that the problem you reported where one-quarter spherical bodies
disappear when sewn into a cylindical sheet will be resolved by code changes made to the
VTK9.00.088 Fix, Holes are deleted when splitting the body in History Free mode.
6227879
6252222
Siemens PLM believes that the problem you reported where the order of bundles selected
was altered by the licensing tool 'License Options' will be resolved by code changes made to
the upcoming release of our software NX 9.0.
6254150
6265914
Siemens PLM believes that the problem you reported where Grid not displaying in expanded
view when preferences is set will be resolved by code changes made to the upcoming
release of our software NX 9.0.
6266009
Movie feature doesn't work when file is saved to a Linux machine running Samba.
6273480
6298010
Siemens PLM believes that the problem you reported where selecting "Find in Navigator" did
not work after de-selecting a component, will be resolved by code changes made to the
upcoming release of our software NX 9.0. The problem was that if the customer happened to
perform a de-selection before using the "Find in Navigator" it would not find some or all of
the components that were selected. This is due to it losing track of the selections after deselecting a component. In this PR case the customer de-selects comp-1 after selecting
comp3, comp_2 and comp-1. The fix has been to change the behavior so that it correctly
tracks the order of selected components.
6303434
Siemens PLM believes that the problem you reported where error messages are incorrect
when license borrow attempts fail, will be resolved by code changes made to the upcoming
release of our software NX9 and NX I-deas 6.4.
6309478
6313881
6314051
Siemens PLM believes that the problem you reported where Performance issue is observed
while launching partfamily spreadsheet through Tools->Partfamily will be resolved by code
changes made to the upcoming release of our software NX9.0 and TC10.1.
6333801
Siemens PLM believes that the problem you reported where a rotated part loses the
associativity to some members of the boundary will be resolved by code changes made to
the upcoming release of our software is fixed in NX 9.0.
6335052
Siemens PLM believes that the problem you reported where UNITE Boolean fails to work
properly will be resolved by code changes made to the upcoming release of our software NX
9.0.
6345252
Siemens PLM believes that the problem you reported where Model compare result and
options will be resolved by code changes made to the upcoming release of our software NX
9.0 by improving the documentation for this command.
6345423
coordinate systems. We have explained that users need to mentally transform the Cartesian
options on the CSYS dialog box (X,Y,Z options) into either R,T,Z or R,T,P options. And I
have provided a simple example of how this is done. Any remaining concerns about the
documentation for the CSYS options dialog box itself should be addressed by filing another
PR against the CAD/Modeling documentation. Thank you for bringing this issue to our
attention.
6350259
Siemens PLM believes that the problem you reported where "FLEXnet version 11.6.1." is
indicated inside the 'ugslicensing.log' file for BOTH NX 7.0 and NX 7.5, yet in actuality is not
the same will be resolved in the following manner: The licensing toolkit upgrade for NX 9.0
has added code to prevent incorrect combinations of client and licnese server to be used
together with an appropriate message. The developer explains: The FLEXlm version ID is
not the key to compatibility, the version of the actual license server ugslmd is what must be
in sync with the client. This version information is displayed in the syslog that is created
when NX is run.
6351451
Siemens PLM believes that the problem you reported where a WAVE linked composite
curve would not update will be resolved by code changes made to the upcoming release of
our software NX 9.0.
6357662
6369306
Siemens PLM believes that the problem you reported where a note that applied only to the
legacy Reposition Component function, not to its Move Component replacement, was left in
the Assemblies Help will be resolved by code changes made to the upcoming release of our
software NX 9.0.
6378685
Siemens PLM believes that the problem you reported where Standard Used for threaded
hole tap drill tables will be resolved by code changes made to the upcoming release of our
software NX 9.0. Added the following paragraph to the Modeling online Help, in the topic
"Standard data tables for Hole feature": "There is no single industry standard used to define
the data tables for threaded hole features, as there is with the older symbolic Thread lookup
tables. The standard data tables for the newer threaded hole come from multiple standards,
catalogs, and best practices, some of which do not specify all parameters of each feature or
not the full range of sizes, but are inferred from other standards of similar design. There are
also some standards that specify dimensions for tap drills that do not correspond to any real
standard drilling tool. In those instances, the best standard size is used instead."
6397891
View sectioning toggle is not remembered when changing displayed part back.
6400842
Siemens PLM believes that the problem you reported where the Model cleanup/face repair
function panel is very confusing to use will be resolved by code changes made to the
upcoming release of our software NX Advanced Simulation Version 9.0. In the NX 8.5
release, the Face Repair command was re-worked and split into two separate commands:
the Face from Boundary command, which replaces the face creation capabilities of Face
Repair, and a new Delete Face command. The NX 8.5 documentation contains examples
and information on the use of both of these new commands. Hopefully, this documentation
addresses your concerns and provides good examples. If you still find this information
confusing or lacking, please file a new PR. Thank you for bringing this issue to our attention.
6401322
Edge Blend performance is quite slow for Update to End or Make Current Feature.
6402183
6408501
Siemens PLM believes that the problem you reported where the component changes
position after Replace component will be resolved by code changes made to the upcoming
release of our software NX 9.0.
6417240
6424048
Match edge results become shorter than referenced face when selected edge is longer.
6427922
6450744
Siemens PLM believes that the problem you reported where several functions are plotted at
once but are no listed in order on the legend, will be resolved by code changes made to the
upcoming release of our software NX Advanced Simulation, version 9.0.
6454491
Siemens PLM believes that the problem you reported where not all of the geometry is
displayed when opening a Solidworks 2009 or Solidworks 2010 file in NX, will be resolved by
code changes made to the upcoming release of our software NX8.5.2 and NX 9.0.
6457260
6461905
Siemens PLM believes that the problem you reported where the Open by Proximity dialog
was displaying negative values for the proximity range, will be resolved by code changes
made to the upcoming release of our software NX 9.0.
6477000
Siemens PLM believes that the problem you reported where you have issue with Enhanced
composite durability processing will be resolved by code changes made to the upcoming
release of our software NX Advanced Simulation Version 9.0.
6486893
Original Block Styler dialog not re-displayed when second dialog closes.
6491913
Siemens PLM believes that the problem you reported where there is a gap between a datum
symbol base and a feature control frame, will be resolved by code changes made to the
upcoming release of our software NX 9.0.
6497196
Siemens PLM believes that the problem you reported where the FROM Marker doesn't affect
location of FROM in Tool Path--> Verify will be resolved by code changes made to the
upcoming release of our software in NX 9.0.
6502420
6507000
6509182
6513706
Siemens PLM believes that the problem you reported where NX did not default to custom
crosshatch definition files having set UGII_UTIL to point to their directory, will be resolved by
code changes made to the upcoming release of our software NX 9.0.
6516221
Siemens PLM believes that the problem you reported where G33 is missing on the MAT2
card will be resolved by adding explicit instructions to NX 9.0 documentation. The MAT2
user interface is very unclear as it is currently presented in NX as the user only needs to
specify 6 or the 21 constants.
6518347
Siemens PLM believes that the problem you reported where a symbolic thread cannot be
seen in a section view will be resolved by code changes made to the upcoming release of
our software NX 9.0.
6518664
6521914
Siemens PLM believes that the problem you reported where a model section cap disappears
after edit, will be resolved by code changes made to the upcoming release of our software
NX 9.0.
6523606
Siemens PLM believes that the problem you reported where Sketch Curves remained
displayed in a drawing view, even though they were hidden using Suppression by
Expression, will be resolved by code changes made to the upcoming release of our software
NX 9.0.
6533954
6537753
6538633
Siemens PLM believes that the problem you reported where rotation handle in move
component does not reset to 0, will be resolved by code changes made to the upcoming
release of our software NX 7.5.2 MP3, NX 8.0.1, NX 8.5 and NX 9.0.
6544249
Siemens PLM believes that the problem you reported where external thread is not displayed
when chamfer exists on part will be resolved by code changes made to the upcoming
release of our software NX 9.0.
6549954
Siemens PLM believes that the problem you reported where Divide by Holder does not
retract to clearance plane at the transfer move will be resolved by code changes made to the
upcoming release of our software NX 9.0.
6563109
Siemens PLM believes that the problem you reported where License Borrow did not work for
Nastran, has been divided into 3 separate issues.
PR6785606 will be fixed in the next Common Licensing toolkit that is distributed with NX.
ER 6785620 will request that the License Borrow dialog show modules that are Common to
multiple products as par of those products.
ER 6785610 will request that the License Borrow dialog show the actual availability of
licenses.
6566682
Siemens PLM believes that the problem you reported where Open solid works file. Only a
small surface is displayed will be resolved by code changes made to the upcoming release
of our software NX 9.0.
6583409
Siemens PLM believes that the problem you reported where the "OK" button is available on
the dialog before a csys has been selected when you create an MCS using "Dynamic" and
"Selected CSYS" will be resolved by code changes made to the upcoming release of our
software NX 9.0.
6584812
Siemens PLM believes that the problem you reported where the borrowing tab became
unavailable in a multiple server configuration will be resolved by code changes made to the
upcoming release of our software NX 9.0 ip11.
6586825
Siemens PLM believes that the problem you reported where a SolidWorks part did not
display all solids, will be resolved by code changes made to the upcoming release of our
software NX 9.0.
6586913
Siemens PLM believes that the problem you reported where there was no option for "Make
Sketch External" in a SB Flange feature, will be resolved by documentation changes made
to the upcoming release of our software NX 9.0. The following note is added to the Flange
Siemens PLM believes that the problem you reported where you were unable to generate a
Flat Pattern for a Conical surface will be resolved by code changes made to the upcoming
release of our software NX 9.0.
6595379
6596058
Siemens PLM believes that the problem you reported where replacing a component, causes
PFM to come in hidden, will be resolved by code changes made to the upcoming release of
our software NX 9.0.
6598516
Siemens PLM believes that the problem you reported where the Flat Solid command
incorrectly created a Closed Corner on a mirrored part, will be resolved by code changes
made to the upcoming release of our software NX 9.0.
6599880
Siemens PLM believes that the problem you reported where you cannot select sketch
reference curves for boundary creation but could in NX 4 will be resolved by code changes
made to the upcoming release of our software in NX 9.0.
6600114
6600185
6600588
Siemens PLM believes that the problem you reported where Post Buildler does not give
correct output for the "Local MCS Special Output" setting of "CSYS Rotation" when the Local
MCS is rotated in more than one axis will be resolved by code changes made to the
upcoming release of our software NX 9.0.
6600625
Siemens PLM believes that the problem you reported where the Moldwizard Documentation
did not explain how to integrate legacy data within the new NX 8 "Reuse" data, will be
resolved by code changes made to the upcoming release of our software NX 9.0. The
following text has been added to the introductory topic:
Important Notices for Mold Wizard: Migrating If you are running Mold Wizard in NX 8 or later,
and have legacy Mold Wizard Engineering data from releases before NX 8, library parts from
the "MW Insert Library", "MW Cooling Standard Library", and the "MW Slide and Lifter
Library" will not automatically appear in the Reuse Library browser. In order to integrate
these parts into the Reuse Library, you must download the Mold Wizard Engineering data
from NX 8 or later, and copy the moldwizard_catalog.txt file from the following folders to the
corresponding folder of your engineering data base prior NX 8:
cool/metric and cool/english
slider/lifter metric and slider/lifter/english
subinsert/metric and subinsert/english
6602570
Siemens PLM believes that the problem you reported where planar mill has a problem with
associativity with the floor will be resolved by code changes made to the upcoming release
of our software in NX 9.0. This PR was fixed by the fix to PR6842475.
6603451
6604731
Siemens PLM believes that the problem you reported where a component that was part of
multiple component arrays and has a problem in one array showed all of the occurrences
have conflicts unless a "fix" constraint is applied to one of the components. will be resolved
by code changes made to the upcoming release of our software NX.9.0.
6610877
Siemens PLM believes that the problem you reported where Routing Classification
Documentation is missing will be resolved by code changes made to the upcoming release
of our software NX 9.0.
6611033
Siemens PLM believes that the problem you reported where UAT BIW Locator All mirror
datums are collected into one Feature, will be resolved by code changes made to the
upcoming release of our software NX 9.0.
6615113
Siemens PLM believes that the problem you reported where the documentation for the
method NXOpen > BasePart > GetAllReferenceSets did not explain that it does not return
"Empty" or "Entire Part" reference sets, will be resolved by documentation changes made to
the upcoming release of our software NX 9.0.
6616546
Siemens PLM believes that the problem you reported where floating numbers output from
shop-doc cannot be displayed with desired format in Html browser will be resolved by code
changes made to the upcoming release of our software NX9. All OOTB (Excel/Html)
templates will be re-configured (in Excel) with proper formats assigned to the cells.
6619041
Siemens PLM believes that the problem you reported where 31xx data case fails to make
front corner correctly and uses rear impact vs 2100 will be resolved by code changes made
to the upcoming release of our software NX 9.0. Additional notes from Product development:
There are two issues in this PR.
The first one is that the 2100 wad line was not used as the rear of impact zone for GTR
when the 2100 wad line is in front of impact.
The second one is that the current algorithm doesn't handle the creation of the boundaries
correctly when there are multiple intersections between the BLE and side reference curve.
1. rear impact vs 2100 We use the 2100 wad line instead of the rear impact curve for GTR
when the 2100 line is in front of the rear impact. The 2100 will be as the rear of the impact
zone if this condition occurs. This change will affect generation of the head impact sheet.
2. Front corner computation We handle the creation of boundaries when there are multiple
intersections between the BLE and side reference curve.
We use the rear section curve among the intersections. We have no prt to test this case until
now. Please send us the prt if the customer still has the problem. Unfortunately, we have no
prt to test the issue of Front Corner Computation. Please provide the customer prt if this PR
need to be reopened.
6619522
Siemens PLM believes that the problem you reported where customer default for wavelinked face "Fix at current time stamp" is ignored will be resolved by code changes made to
the upcoming release of our software NX 9.0 The problem is fixed in the way that the
modeling customer default for wave-linked face "Fix at current time stamp" will not be used.
A new customer default: Manufacturing, Geometry, "WAVE Geometry Linker" Tab, Group
Planes, "Fix at Current Timestamp", has been added to control the behavior when the
system creates wave links for CAM. This is done in NX 9.0.0.
6620902
Siemens PLM believes that the problem you reported where importing a part file containing a
boolean feature resulted in a failure to update the boolean feature will be resolved by code
changes made to the upcoming release of our software NX 9.0.
6621543
Siemens PLM believes that the problem you reported where a Sheet metal part will not
flatten unless converted to sheetmetal, will be resolved by code changes made to the
upcoming release of our software NX 9.0.
6622457
Siemens PLM believes that the problem you reported where creating text in modeling throws
off the scale if units are changed, will be resolved by code changes made to the upcoming
release of our software NX 9.0.
6622465
Siemens PLM believes that the problem you reported where opening a Solid Works part in
NX did not display all of the solids will be resolved by code changes made to the upcoming
release of our software NX 9.0.
6624378
Siemens PLM believes that the problem you reported where using measure distance causes
some geometry to move, will be resolved by code changes made to the upcoming release of
our software NX 9.0.
6625539
Browser output not showing same number of decimal places as HTML/Excel output.
6628087
6629000
Siemens PLM believes that the problem you reported where Clone of CAE structure not
working as expected - Load Interpart Data ON will be resolved by code changes made to the
upcoming release of our software NX 9.0.
6629321
Siemens PLM believes that the problem you reported where the documentation about Mesh
Control, Biasing on Edge was incorrect will be resolved by code changes made to the
upcoming release of our software NX 9.0. In the existing Mesh Control help, the definition for
the Edge Fraction option was incorrectly also used to describe the Bias Ratio option.
6630757
The problem where X-Form is Unable to Replace Face has been investigated and the
following has been found to be fixed in NX 7.5. In NX 7.5, Xform starts to support nonBsurface face. Upon selection a face from solid body will be extracted to B-surface. We
believe circular polygon distribution of a face results better editing in shape in styling
process. This part filed has been saved in NX 7.5, I am not able to compare the result before
NX 7.5. A non-Bsurface input was not supported in pre-NX 7.5. In order to use Xform in preNX 7.5 release, it needs to be manually extracted to B-surface form first. If you do the
extraction step before use Xform, it will keep the same way in NX 7.5 or newer release in
case you like square-shaped polygon pole distribution, assuming Face Extraction hasn't
changed its algorithm. Common service has changed its algorithm for periodic geometry, it is
supposed to work better than before. In order to achieve the result in 68A691321-1003.prt
with part file 68A691321_1001_interior.prt, when changing parameterization in Xform,
please first make U patch to 16, then U degree to 6, V patch to 1, then V degree to 10. Due
to the complicated changing parameter algorithm in Xform, in the case of this part file which
the face has to be sewed back to two end faces, please always start with high Patch
number, try to keep degree low if possible for better successful rate in NX 9.0.
6633231
6633457
Siemens PLM believes that the problem you reported where a Zlevel closed area engage
used an open area engage will be resolved by code changes made to the upcoming release
of our software in release NX 8.0.3.
6634408
Siemens PLM believes that the problem you reported where Align Positioning Constraints
were created as unsolved with the status: "Not solved due to other conflicts" when placing
an end form with a built-in path, will be resolved by code changes made to the upcoming
release of our software NX 9.0.
6635819
Siemens PLM believes that the problem you reported where a part of uniform thickness
incorrectly raised the alert: "The body has non-uniform material thickness or contains edges
that need to be ripped", will be resolved by code changes made to the upcoming release of
our software NX 9.0.
6636007
Siemens PLM believes that the problem you reported where opening a Solid Works part in
NX did not display all of the solids will be resolved by code changes made to the upcoming
release of our software NX 9.0.
6636792
6638206
Siemens PLM believes that the problem you reported where the Open C API Reference
guide needed to provide more information on the usage of the function
UF_UGMGR_reg_saveas_dataset_info will be resolved by documentation changes made to
the upcoming release of our software NX 9.0.
6638897
Siemens PLM believes that the problem you reported where Flat Solid/Flat Pattern not
Working after a Convert to Sheet Metal will be resolved by code changes made to the
upcoming release of our software NX 9.0.
6639621
6641862
Planar Mill - Floor plane - WAVE link at time stamp prevents part from opening.
6642229
6653684
Siemens PLM believes that the problem you reported where Bend Feature gives invalid
result will be resolved by code changes made to the upcoming release of our software NX
9.0
6653816
Siemens PLM believes that the problem you reported where the Turning avoidance
geometry group radial clearance is incorrect if set at an angle will be resolved by code
changes made to the upcoming release of our software NX 9.0.
6656361
Siemens PLM believes that the problem you reported where in NX/MGR, View of Part
information should not give the Database name will be resolved by code changes made to
the upcoming release of our software NX 9.0.
6656794
Siemens PLM believes that the problem you reported where the Revision column in the
Assembly Navigator did not refresh as expected will be resolved by code changes made to
the upcoming release of our software NX 9.0.
6656833
Siemens PLM believes that the problem you reported where no objects are found opening a
Solidworks file will be resolved by code changes made to the upcoming release of our
software NX 9.0.
6659305
Not possible to format numeric output in the Tool List in Shop Docs.
6660797
Siemens PLM believes that the problem you reported where the value displayed for a Run is
not the value of the attribute assigned to the Run will be resolved by code changes made to
the upcoming release of our software NX 8.0.3 MP3 and NX 9.0.
6661051
Siemens PLM believes that the problem you reported where the original Block Styler dialog
fails to re-appear when a second dialog is dismissed will be resolved by code changes made
to the upcoming release of our software NX 9.0.
6663349
Siemens PLM believes that the problem you reported where the micron and delta symbols
are not translating to a drawing using the DWG translator will be resolved by code changes
made to the upcoming release of our software NX 9.0.
6664522
Siemens PLM believes that the problem you reported where "Merge Faces If Possible"
option causes poor quality blending, (both edge blend and face blend). will be resolved by
code changes made to the upcoming release of our software NX 9.0
6664561
Siemens PLM believes that the problem you reported where PS25.1.132 - Failure of
EdgeBlend option - 'Maintain Blend and Move Sharp Edges', will be resolved by code
changes made to the upcoming release of our software NX 9.0. Parasolid has fixed the issue
in PS25.01.132. I have verified the desired result can be achieved in NX 9.0 using
PS25.1.139. However, to get the desired result the blend must be recreated in the current
version of NX so that the latest update switches are used by the edge blend. Parasolid also
states that the fix can not be patched back to version 25.0 or earlier and thus this blend will
not work in NX versions earlier than NX 9.0.
6664577
Siemens PLM believes that the problem you reported where PS26.00.143 - Failure to create
Edgeblend will be resolved by code changes made to the upcoming release of our software
NX 9.0.
6665366
Siemens PLM believes that the problem you reported where "An attempt was made to
remove or replace a non-existent reference" message received when replace component
after creating Bead weld will be resolved by code changes made to the upcoming release of
our software NX 9.0.
6666164
Siemens PLM believes that the problem you reported where additional documentation was
needed to explain how to get the application name to display correctly in the Visual Basic
project, will be resolved by documentation changes made to the upcoming release of our
software NX 9.0.
6667722
6671939
Siemens PLM believes that the problem you reported where after editing a Tabular Note
using the spreadsheet and exiting Excel, any edit done to the Tabular Note does a connect
and disconnect from the spreadsheet sheet which is really slow, will be resolved by code
changes made to the upcoming release of our software NX 9.0.
6673166
Siemens PLM believes that the problem you reported where Mold Wizard DME Guide Pins
are not updated to the 2011 DME catalog will be resolved by code changes made to the
upcoming release of our software NX 9.0.
6673177
6679589
6680752
6681059
Siemens PLM believes that the problem you reported where opening a DWG files causes
NX to crash will be resolved by code changes made to the upcoming release of our software
NX 9.0.
6684676
Siemens PLM believes that the problem you reported where Weld Assistant Export Welds
does not select filet / groove welds will be resolved by code changes made to the upcoming
release of our software NX 9.0.
6685409
The problem where the documentation for the Object Count option and the Information
option in the Layer Settings dialog box was not appropriate is fixed in NX 9.0.
The following note is added in the options: "The object count on a layer does not include the
objects that you cannot directly modify, such as supporting sketches. You can get the
complete count of objects on a layer by using the NX Open API
UF_LAYER_cycle_by_layer."
6686413
Siemens PLM believes that the problem you reported where selecting all while filtering on
Tabular notes, will be resolved by code changes made to the upcoming release of our
software NX 9.0. Cell style modification for multiple tabular notes or parts lists is not
supported and the menu item was incorrectly available on multi table selection. The problem
is fixed in NX 9.0 where if multiple tables are selected, 'Cell Settings' modification will not be
available.
6686562
6687026
There's no way to control output decimal with tool dia.eter, tool number ..
6690527
Siemens PLM believes that the problem you reported where some solids are missing when
opening a SolidWorks part will be resolved by code changes made to the upcoming release
of our software NX 9.0.
6694764
Siemens PLM believes that the problem you reported where if "Display Verbose Error
Messages" is on in Post Builder, the Review Tool will not open when postprocessing will be
resolved by code changes made to the upcoming release of our software NX 9.0.
6695290
Siemens PLM believes that the problem you reported where editing a feature in CAM does
not open the feature dialog, will be resolved by code changes made to the upcoming release
of our software NX 9.0.
6697950
Siemens PLM believes that the problem you reported where Editing a pre-NX6 Parts list
causes the partslist to resort, will be resolved by code changes made to the upcoming
release of our software NX 8.5.2 and NX 9.0. The sorting issue can be worked around in NX
6.0.5 i.e. without the fix by setting Customer default: Drafting>Annotation>Parts Lists >
toggle "Create New Rows As Locked" to OFF; re-starting NX and then loading the user
drawing.
6703159
6704714
6704975
6706536
Siemens PLM believes that the problem you reported where Dimension line is always from
left in sketch but flips automatically in drafting will be resolved by code changes made to the
upcoming release of our software NX 9.0.
6708405
Siemens PLM believes that the problem you reported where the Siemens 840D post
template has an invalid MOM_set_seq_on command will be resolved by code changes
made to the upcoming release of our software NX9. The workaround available as a patch file
for NX 8.5, NX 8.5.1, and NX 8.5.2 is to place the updated "sinumerik_840D_millturn.pui" in
the following directory of your NX install:
\\POSTBUILD\\pblib\\controller\\mill\\SIEMENS\\Sinumerik_840D_millturn\\ before creating a
new post using this controller post. This file is available from GTAC.
6709410
Sketch constraint symbols and curves didn't change colour when over constrained.
6713821
Siemens PLM believes that the problem you reported where a part file failed to update
during feature playback will be resolved by code changes made to the upcoming release of
our software NX 9.0.
6714304
Siemens PLM believes that the problem you reported where you can't create a sheet metal
jog on a base tab, will be resolved by code changes made to the upcoming release of our
software NX 9.0.
6714783
Draft Body not working in this part for angle range 3.2 to 4.1
6714978
Siemens PLM believes that the problem you reported where the NXOpen Java API
Reference Guide was not correctly showing a method's parameters and the corresponding
descriptions, will be resolved by documentation changes made to the upcoming release of
our software NX 9.0.
6715657
Siemens PLM believes that the problem you reported where Detail View errors out when
selecting a specific point for its center will be resolved by code changes made to the
upcoming release of our software NX 9.0.
6715897
6716587
6719146
Siemens PLM believes that the problem you reported where changing color of a label
causes the leader stub to re-orient will be resolved by code changes made to the upcoming
release of our software NX 9.0.
6719442
6720181
6721553
Siemens PLM believes that the problem you reported where updating a Hole Table to
include a new hole adds rows to the table 1/3 of the way up from the bottom, and having
manually moved the rows to the bottom of the table the original rows could not be removed,
will be resolved by code changes made to the upcoming release of our software NX 9.0. The
Hole Table keeps all the holes information as per sorted order based on their diameter size.
So for a body, smaller diameter hole will appear first in the hole table and then bigger and
next-bigger dia hole. Whenever a new hole gets added in the hole table, it gets placed as
per its size in the table. The hole table update issue is fixed in NX 9.0.
6722364
Siemens PLM believes that the problem you reported where running the Nastran fort.151 file
results in a permission error and causes NX Nastran to stop with a fatal error, will be
resolved by code changes made to the upcoming release of our software NX Nastran 9.0.
6731061
Siemens PLM believes that the problem you reported where the Info View of the HD3D
Tools Navigator displayed incorrect Details for some of the check results, will be resolved by
code changes made to the upcoming release of our software NX 9.0.
6731933
Siemens PLM believes that the problem you reported where trimming a sheet fails in some
areas using the default tolerance, will be resolved by code changes made to the upcoming
release of our software NX 9.0.
6735871
Part boundaries are not updated correctly after mirroring the part.
6740946
Siemens PLM believes that the problem you reported where oening an assembly in NX 7.5.5
MP1 raises the error "Too many iterations of UPDATE/DELETE have occurred" will be
resolved by code changes made to the upcoming release of our software NX 9.0.
6743383
Siemens PLM believes that the problem you reported where the documentation for
mqc_askRefSetMembers was not correct will be resolved by code changes made to the
upcoming release of our software NX 9.0.
6746329
Siemens PLM believes that the problem you reported where pre-selecting a UDF, then
selecting Move Object did not retain the pre-selection, will be resolved by code changes
made to the upcoming release of our software NX 9.0.
6747320
How to round off the tool dia in shop docs. Same as PR6686562
6751238
Siemens PLM believes that the problem you reported where the Check-Mate documentation
for the function mqc_checkCategoryLayer needed to provide more information will be
resolved by documentation changes made to the upcoming release of our software NX 9.0.
6751383
Siemens PLM believes that the problem you reported where a PMI Feature Control Frame
remained retained when its parent geometry was loaded, will be resolved by code changes
made to the upcoming release of our software NX 9.0.
6752142
Siemens PLM believes that the problem you reported where a specific item revision fails to
generate JT when the top assembly is loaded, will be resolved by changes made to the
upcoming release of our software NX 9.1.
6753541
Siemens PLM believes that the problem you reported where a mesh mating condition
produced inconsistent results will be resolved by code changes made to the upcoming
release of our software NX 9.0.
6754133
Siemens PLM believes that the problem you reported where the Block Styler Specify Plane
cannot be pre-set will be resolved by code changes made to the upcoming release of our
software NX 9.0.
6754895
Siemens PLM believes that the problem you reported where translating a file using 2D
Exchange, or the DXF/DWG translator, did not translate text correctly, will be resolved by
code changes made to the upcoming release of our software NX 9.0.
6756229
Siemens PLM believes that the problem you reported where Part Family member displays
Component when the field is Blank in the Part Family Spreadsheet will be resolved by code
changes made to the upcoming release of our software NX 9.0.
6758914
Siemens PLM believes that the problem you reported where a Flat Pattern or Flat Solid fail
will be resolved by code changes made to the upcoming release of our software NX 9.0.
6758924
Siemens PLM believes that the problem you reported where certain annotation leader lines
in NX file do not come across in the JT will be resolved by code changes made to the
upcoming release of our software NX 9.0.
6759711
Siemens PLM believes that the problem you reported where the selection method of
Measure command in Motion Simulation is vague, will be resolved by Documentation
changes made to the upcoming release of our software NX Motion Simulation, version 9.0.
Development's explanation of the selection method within the Measure function is as follows:
Measure Packaging Option dialog box The available measurements available in Motion
Simulation Measure Packaging option are:
1) Minimum Distance,
2) Minimum Angle.
The documentation needs to be changed to reflect that the Angle Measurement is the
Minimum Angle. As far as the items that are being measured. The software allows the user
to select either one or two sets of objects. If there is one object in set one and one in set two,
or two in set one, it will make the same single measurement between the two objects. If the
user sets up multiple items in either or both sets, there will also be a single measurement
between the two sets. NX will display either the minimum angle or minimum distance
(depending on the measurement chosen), as a single measurement between all items in set
1 and all items in set 2. That is why the measurement will potentially jump around during
animation of a measurement that includes sets with multiple items. Only a single
measurement will be shown at any moment during an animation. The documentation will be
modified to clarify these points. The documentation for the green checkmark and the red
asterisk is located at: Help->Fundamentals->NX Interface->Dialog Boxes->Visual cues in
dialog boxes. The red asterisk indicates that NX is expecting you to make a selection. The
green checkmark indicates that a valid selection has been made.
6761212
6761837
Siemens PLM believes that the problem you reported where File -> Export PDF and the
corresponding NXOpen > PrintPDFBuilder class fail with an error "CGM filename has invalid
characters" if a file with the name UGII_TMP_DIR\\cgm_to_pdf0.cgm already exists and
cannot be opened for write access, will be resolved by code changes made to the upcoming
release of our software NX 9.0.
6762138
Siemens PLM believes that the problem you reported where the Femail Draw Bead trough
was not being created for the Male Draw Bead transistion using the Die Engineering Draw
Bead operator, will be resolved by documentation changes made to the upcoming release of
our software NX9.0. The problem where information was missing from the documentation
that would have helped to resolve this case is fixed in release NX 9.0. A note has been
added to the Draw Bead dialog box topic regarding this issue.
6762209
Siemens PLM believes that the problem you reported where changing the threaded hole size
in a Part Family spreadsheet caused a syntax error, will be resolved by code changes made
to the upcoming release of our software NX 9.0. Also, the default output to spreadsheet for
threaded holes and other attributes of type expression which take strings as values, will be in
double quotes (""). The threaded hole size is to be provided in double quotes in the
spreadsheet and the default values (which appear under the attribute column when the
attribute is added to family for the first time) will convey that henceforth.
6762377
Siemens PLM believes that the problem you reported where the Technical Documentation
for the Non Cutting Moves option "Minimum Clearance" required additional information on its
use will be resolved by code changes made to the upcoming release of our software NX 9.0.
6763467
Siemens PLM believes that the problem you reported where the documentation for the
NXOpen.Display > StudioImageCaptureBuilder class did not state that it cannot be used in
external (batch) mode, will be resolved by documentation changes made to the upcoming
release of our software NX 9.0.
6765148
Siemens PLM believes that the problem you reported where the Macro definition of the
Custom keyword was missing in the NX help, will be resolved by code changes made to the
upcoming release of our NX 9.0 Help. The following topics are now available in the NX9
Recording NX sessions help: Macro keyword - CUSTOM : Macro keyword CUSTOM_HEADER
6766738
The problem where it is not possible to insert either a constant radius Face Blend or Edge
Blend at a desired radius of 90mm with the supplied part has been investigated and the
following has been found. This PR cannot be investigated further because expertise to do so
is not available in the US but permission to export the PR data has been denied. We regret
that the PR has to be closed unresolved though we will keep this record indefinitely for future
reference, analysis and statistics. If the customer can supply alternate data that can be
exported and demonstrates the problem, we will be most grateful and will reopen the PR to
provide a fix.
6766747
Siemens PLM believes that the problem you reported where the documentation for a "User
Defined" tool holder does not state that when this style of holder is selected the option "Lock
Insert and Holder Orientation" is made available and how it is used will be resolved by code
changes made to the upcoming release of our software NX 9.0.
6767754
Siemens PLM believes that the problem you reported where the Preferences settings for
"Disable Translucency" and "Disable Line Antialiasing" do not remain unchecked, will be
resolved by code changes made to the upcoming release of our software NX 9.0.
6767910
Siemens PLM believes that the problem you reported where "Optimize Feed Rate When
Generating" has no function for thread/hole milling will be resolved by code changes made
to the upcoming release of our software NX 9.
6770647
Siemens PLM believes that the problem you reported where the NXOpen.Features >
SewBuilder unexpectedly throws an exception "Cannot set the value for the property" when
attempting to set the SewAllInstances property will be resolved by documentation changes
made to the upcoming release of our software NX9.0 where the property has been properly
deprecated.
6771411
Siemens PLM believes that the problem you reported where NXOpen.Gateway >
PasteBuilder > GetCommittedObjects did not return the newly Pasted Objects will be
resolved by code changes made to the upcoming release of our software NX 9.0.
6772183
The browser output should show the same output as HTML/Excel output.
6772491
Siemens PLM believes that the problem you reported where you could not open a Solid
Works file in NX 8.0.2 will be resolved by code changes made to the upcoming release of
our software NX 9.0.
6772581
Siemens PLM believes that the problem you reported where you were getting "Too many
iterations of UPDATE/DELETE have occurred" will be resolved by code changes made to
the upcoming release of our software in NX 9.0.
6772701
Siemens PLM believes that the problem you reported where in a Millimeter part, with the
Custom Units set for "lbs-in" the Sketch dialog slider bar has wrong value, will be resolved
by code changes made to the upcoming release of our software NX 9.0.
6773126
6773627
6775456
Siemens PLM believes that the problem you reported where there is a TABLEM1 table data
incorrect - sol 601,106 error, will be resolved by code changes made to the upcoming
release of our software NX 9.0.
6776182
Siemens PLM believes that the problem you reported where the Knowledge Fusion
documentation for the nx_extract_face class did not explain that the
Faces_To_Extract_Array parameter attribute is obsolete and that the
Object_To_Extract_Array parameter must be used instead will be resolved by
documentation changes made to the upcoming release of our software NX 9.0.
6776205
Siemens PLM believes that the problem you reported where the documentation for the
"run_journal" command needed to explain how to use it in TCIN (NX Manager) mode will be
resolved by documentation changes made to the upcoming release of our software NX 9.0.
6776488
6776578
Siemens PLM believes that the problem you reported where a Counter Bored Hole became
a Simple Hole following a Rebend operation on a Lofted Flange feature in NX Sheet Metal,
will be resolved by code changes made to the upcoming release of our software NX 9.0. The
Rebend feature needs to deleted/suppressed to recreate the feature in order to see the fix.
6776635
Siemens PLM believes that the problem you reported where unitless attributes do not retain
the unitless measure after a copy/paste operation, will be resolved by code changes made to
the upcoming release of our software NX 9.0.
6777545
Siemens PLM believes that the problem you reported where documentation on Convert to
Independent View is not sufficient will be resolved by code changes made to the upcoming
release of our software NX 9.0.
6777625
6779545
Siemens PLM believes that the problem you reported where a GRIP program left the
graphics area locked such that zoom, pan, fit, etc. no longer worked will be resolved by code
changes made to the upcoming release of our software NX 9.0.
6780883
Siemens PLM believes that the problem you reported where Synchronous Technology in
CAM Express needs a modeling license will be resolved by code changes made to the
upcoming release of our software in NX 9.0.
6781262
Siemens PLM believes that the problem you reported where a part cannot be thickened after
a Trim will be resolved by code changes made to the upcoming release of our software NX
9.0.
6782334
Siemens PLM believes that the problem you reported where a broken view results in
incorrect cross hatching will be resolved by code changes made to the upcoming release of
our software NX 9.0.
6782495
Siemens PLM believes that the problem you reported where a Name Attribute applied to a
CSYS at Absolute was stripped when exported via STEP, will be resolved by code changes
made to the upcoming release of our software NX 9.0.
6782516
Siemens PLM believes that the problem you reported where in detail view, custom symbol is
moved to different location than in the parent view will be resolved by documentation
changes made to the upcoming release of our software NX 9.0 This is working as per
design. Scaling of custom symbol just like other drafting annotations does not change its
origin location. The symbol's scale in detail view is defind in a formula as below:
SymbolSacleInDetailView= originalSymbolSacle*ScaleFactor Where ScaleFactor =
ParentViewScale/DetailViewScale In this case ScaleFactor = 0.09375/.125 = 0.75 If you
change the custom symbol scale from 1 to .75 then the display of the symbol in detail view
would look exactly like in parent view. A new procedure is added to the Drafting Help
collection that describes the behavior of displaying annotation from a parent view in a detail
view.
6782610
Siemens PLM believes that the problem you reported where the Active state of a curve gets
converted back to a Reference state when making simple edits to the Pattern/Mirror will be
resolved by code changes made to the upcoming release of our software NX 9.0. Please
note that if the user is doing a complex edit in NX 9.0 (like de-select all/re-select all, or
changing pattern types), then this would be considered as re-creating the pattern from
scratch, so NX will end up re-propagating the Reference state from the base curves.
6782635
Siemens PLM believes that the problem you reported where it is taking 5-10 seconds to
delete a line within a part file will be resolved by code changes made to the upcoming
release of our software NX 9.0.
6782702
Siemens PLM believes that the problem you reported where opening a SIM file and the
assembly FEM is left "unloaded" will be resolved by code changes made to the upcoming
release of our software NX 9.0.
6782867
Export to Movie has bad movie display if part of the graphics window is obscured.
6783218
Siemens PLM believes that the problem you reported where multiple UGPART named
references could appear in a UGMASTER dataset will be resolved by code changes made to
the upcoming release of our software NX9.0 and also maintenance patches of previous
releases based on customer requirements.
6783444
Siemens PLM believes that the problem you reported where the spun outline of a cylindrical
face was incorrect will be resolved by code changes made to the upcoming release of our
software NX 9.0.
6783743
6783753
6783834
Siemens PLM believes that the problem you reported where PF member created with
drafting view failure to update will be resolved by code changes made to the upcoming
release of our software NX 9.0.
6784090
Siemens PLM believes that the problem you reported where "freeze assembly update" does
not freeze AFEM update will be resolved by code changes made to the upcoming release of
our software NX Advanced Simulation Version 9.0. Note that the "freeze assembly update"
stops the AFEM from updating changes to the assembly (the CAD assembly part) the AFEM
references, it will still allow the user to manually add a new component to the AFEM. To
prevent changes to the CAD assembly component positions from updating your assembly
FEM, in the Simulation Navigator, right-click the assembly FEM node and choose Freeze
Assembly Updates. Freeze Assembly Updates applies only to CAD component positioning.
Even when Freeze Assembly Updates is selected, any components that are added to or
removed from your CAD assembly will affect your assembly FEM as specified by your
Update Options settings, as described in the table above.
6784132
Siemens PLM believes that the problem you reported where it was not possible to use the
NXOpen.CAE > MappedMeshBuilder > SetCornerData because it required an array of
objects of the type CAEVertex yet there was no available method to obtain objects of this
type will be resolved by code changes made to the upcoming release of our software NX 9.0
with the addition of a new method SetCornerDataWithEdges which uses CAEEdges as
input.
6785606
6786080
Siemens PLM believes that the problem you reported where BACKGROUND option for the
UGWeb Express command @UGSHADE was not documented will be resolved by
documentation changes made to the upcoming release of our software NX 9.0.
6786139
6786502
NX / Save As / Create New Revision / Save as non-master part files rename error.
6786531
Siemens PLM believes that the problem you reported where NX Save As / Create New
Revision / non-master part files menu - check box error will be resolved by code changes
made to the upcoming release of our software NX 9.0.
6787641
Siemens PLM believes that the problem you reported where the Edge-to-Surface Gluing
documentation was incorrect will be resolved by code changes made to the upcoming
release of our software NX 9.0. The erroneous statement has been removed that you can
select the edges of 3D elements to define the edge for the source region. The information in
the Nastran Quick Reference Guide and the Nastran User's Guide (Gluing Elements section)
has been used to explicitly add the supported 2D and 3D element types for both surface and
edge regions. Hopefully, this will eliminate any future confusion. Given that Edge-to-Edge
Gluing is now supported in NX 8.5 and higher releases, it is unnecessary at this time to add
the suggested note about not using Edge-to-Surface Gluing to define Edge-to-Edge glue
conditions. Thank you for bringing these issues to our attention.
6787666
Siemens PLM believes that the problem you reported where "Info -> PMI -> Report" did not
correctly show a compound Datum Reference Frame in a PMI FCF, will be resolved by code
changes made to the upcoming release of our software NX 9.0.
6788852
Siemens PLM believes that the problem you reported where a PMI stub length was reset to
default when placing a draft view, will be resolved by code changes made to the upcoming
release of our software NX 9.0.
6789165
Siemens PLM believes that the problem you reported where the Open C API functions
UF_PART_export and UF_PART_export_with_options did not return an informative error
message when they fail because there is no displayed part will be resolved by code changes
made to the upcoming release of our software NX 9.0. The documentation has also been
updated to explain that there must be a displayed part to use these methods.
6789410
Siemens PLM believes that the problem you reported where Replace Face leaves an extra
edge, will be resolved by code changes made to the upcoming release of our software NX
9.0.
6790685
Siemens PLM believes that the problem you reported where it was not possible to select
Crosshatch or Area Fill objects using Define Custom Symbol if the symbol was created in
Modeling and the objects are being selected from Drafting, will be resolved by document
changes made to the upcoming release of our software NX 9.0. The data associated with
this PR indicated that View Independent Geometry was used to create the custom symbol.
Although the documentation does state that View Independent Geometry cannot be used to
create custom symbols, additional information was added to better define what is meant by
"View Independent Geometry".
6791320
Siemens PLM believes that the problem you reported where user is unable to re-associate
an out of date datum axis, will be resolved by code changes made to the upcoming release
of our software NX 9.0.
6791687
Siemens PLM believes that the problem you reported where NX documentation does not
describe how to ensure operation parameters are inherited from the tool to the operation will
be resolved by code changes made to the upcoming release of our software NX 9.0.
6792080
Siemens PLM believes that the problem you reported where Sheet Zone Reference string
was incorrect in the documentation, will be resolved by documentation changes made to the
upcoming release of our software NX 9.0. The reference string is an arbitraty set of control
characters generated internally by NX, and cannot be directly referenced by a user. This
specific information has been removed from the documentation.
6792884
Siemens PLM believes that the problem you reported where an empty line is removed from
both the posted output file and when viewing in synch manager will be resolved by code
changes made to the upcoming release of our software NX 8.5.1 and NX 9.0.
6792947
Siemens PLM believes that the problem you reported where the method
AskOpenPartFilename crashes and never displays the dialog from NX Managed mode will
be resolved by code changes made to the upcoming release of our software NX 8.0.3 MP3.
6796222
Siemens PLM believes that the problem you reported where Multiple Holders with the same
libref being created will be resolved by code changes made to the upcoming release of our
software in NX 9.0.
6796732
Siemens PLM believes that the problem you reported where "Output Contact/Tracking Data
with Cutcom enabled" will gouge the part will be resolved by code changes made to the
upcoming release of our software NX 9.0.
6798020
Siemens PLM believes that the problem you reported where there was no documentation on
the Import Machining Data button - Edit Machining Data Libraries will be resolved by code
changes made to the upcoming release of our software NX 9.0. The following overall
statement was added, and also a short procedure.
You can import from these sources: A comma delimited text file *.csv The current feeds and
speeds library feeds_speeds.dat Another machine_data.dat file
6798471
Siemens PLM believes that the problem you reported where editing of swept feature.results
in wrong Body Type setting will be resolved by code changes made to the upcoming release
of our software NX 9.0.
6799252
Siemens PLM believes that the problem you reported where the Sketch geometry was not
appearing in View will be resolved by code changes made to the upcoming release of our
software NX 9.0.
6799921
Siemens PLM believes that the problem you reported where the Open C API function
UF_ASSEM_deform_part fails with an error 671254 "Unable to paste" will be resolved by
code changes made to the upcoming release of our software NX 9.0.
6800476
Siemens PLM believes that the problem you reported where "Normal to Part" Engages or
Retracts in Surface Contouring operations use the drive surface normal when no part
surface is available is not documented, will be resolved by code changes made to the
upcoming release of our software NX 9.0.
6801027
Siemens PLM believes that the problem you reported where the hole table was not
displaying correct callouts, will be resolved by code changes made to the upcoming release
of our software NX 9.0.
6801158
Siemens PLM believes that the problem you reported where N-Sided surface loses it's trim
when selecting edges in certain order, will be resolved by code changes made to the
upcoming release of our software NX 9.0.
6802659
Siemens PLM believes that the problem you reported where Global Shaping by Function
works for one situation, but fails for a second in the same part file will be resolved by code
changes made to the upcoming release of our software NX 9.0.
6802856
The problem where the "Make Unique" command no longer has the option for "No - Discard
Changes" in NX 8.0.3. has been investigated and the following has been found. The problem
where the documentation needed to inform users that the Discard Changes option is no
longer available is fixed in release NX 8.5.2 and NX 9.0. The option used to appear on a
message when users tried to use Make Unique on a part that had unsaved changes.
Software enhancements now require underlying parts to be in sync with the parts in
Teamcenter before commands such as Make Unique are carried out. A product note was
added to the release notes for both those releases. Although the change was also made in
NX 8.0.3, the documentation for that release froze months before this PR, and no more NX
8.0.x releases are planned. The product note in NX 8.5.2 and NX 9.0 does tell users that the
change was also made in NX 8.0.3. There is no impact to the Assemblies Help.
6805052
6806292
Siemens PLM believes that the problem you reported where a Z-Level Profile operation with
Extend at Edges enabled will not cut the entire face will be resolved by code changes made
to the upcoming release of our software NX 9.0.
6806427
Siemens PLM believes that the problem you reported where the flute length is not on a
Centerdrill, Countersink or Spot Drill dialog will be resolved by code changes made to the
upcoming release of our software NX 9.0. The problem was that flute length could be set
only in the library, and not interactively, and the default length displayed was hidden. In NX
9.0, a flute length of zero provides an automatic behavior which sets the flute length to the
point where the angle meets the outside diameter. The flute length has been added as a
customizable item in the dialog, but is not on the dialog out of the box. If you want to set an
explicit flute length other than the automatic behavior, set it in the tool library, and/or add the
UI item to the dialog.
6806471
Siemens PLM believes that the problem you reported where a 1D connector is created in the
Assembly FEM (AFEM), and results in an error when the dependent nodes have their
Displacement coordinate system changed to a local CSYS, will be resolved by code
changes made to the upcoming release of our software NX Advanced Simulation, version
9.0.
6806859
Siemens PLM believes that the problem you reported where Section curve problem. The
number of curves changes after edit will be resolved by code changes made to the
upcoming release of our software NX 9.0.
6807021
Siemens PLM believes that the problem you reported where the combine rotary command is
not working if mom_pos is set to mom_mcs_goto value will be resolved by code changes
made to the upcoming release of our software in NX 9.0.
6807362
Siemens PLM believes that the problem you reported where Documentation for Surface
Regions is incorrect because some ptions still reference NX7.5 will be resolved by code
changes made to the upcoming release of our software in NX 9.0.
6809442
Siemens PLM believes that the problem you reported where editing Curve Text with a
Reference Text Filter unexpectedly changes the text will be resolved by code changes made
Siemens PLM believes that the problem you reported where the position coordinate of a
"lightwieght" body is different from the "Exact" body, will be resolved by code changes made
to the upcoming release of our software NX 9.0.
6810378
Siemens PLM believes that the problem you reported where New Projects in teamcenter are
not available in NX will be resolved by code changes made to the upcoming release of our
software NX 9.0.
6810537
Siemens PLM believes that the problem you reported where a boolean fails on bodies that
pass Examine Geometry, will be resolved by code changes made to the upcoming release of
our software NX 9.0.
6811566
Siemens PLM believes that the problem you reported where Section view preferences
changes with different parts open in the session will be resolved by code changes made to
the upcoming release of our software NX 9.0
6812354
Siemens PLM believes that the problem you reported where it was not possible to export a
JT from an NX assembly when the tessUG.config file had been edited to set xtbrep=false,
will be resolved by code changes made to the upcoming release of our software, NX 8.5.3
and N X9.0.
6812457
Siemens PLM believes that the problem you reported where there was no NXOpen API
method equivalent to the Open C API function UF_MODL_set_update_fail_option will be
resolved by code changes made to the upcoming release of our software NX 9.0.
6812900
Siemens PLM believes that the problem you reported where the 'Allow Spreadsheet' option
was missing from the Help Documentation for the ug_convert_part utility will be resolved by
code changes made to the upcoming release of our software NX 9.0.
6813136
Siemens PLM believes that the problem you reported where the Knowledge Fusion
documentation for the %ui_comp_list_box did not state that the Selected Items list contains
0 based indices into the List Items list will be resolved by documentation changes made to
the upcoming release of our software NX 9.0.
6813681
Siemens PLM believes that the problem you reported where a user was unable to make
Emboss(18) the same as other Emboss features will be resolved by code changes made to
the upcoming release of our software NX 9.0.
6814515
Siemens PLM believes that the problem you reported where mid side node connectivity was
wrong on HEX 20 elmennts will be resolved by code changes made to the upcoming release
of our software NX 9.0.
6815003
Siemens PLM believes that the problem you reported where the menuscript documentation
did not explain that the same button name cannot be defined multiple times even though
different /PLATFORM option settings are being used, will be resolved by documentation
changes made to the upcoming release of our software NX 9.0.
6815394
Siemens PLM believes that the problem you reported where configuring a UDF (User
Defined Library) in Teamcenter with individual Help Document Files will be resolved by code
changes made to the upcoming release of our software NX 9.0. The procedure "Importing
UDF with help file" has been added to the Teamcenter Integration Documentation.
6815457
Siemens PLM believes that the problem you reported where there is an Offset Curve Alert
choosing line in sketch, will be resolved by code changes made to the upcoming release of
our software NX 9.0.
6815486
6816125
Siemens PLM believes that the problem you reported where Zlevel 5-axis cut levels where
not updating when the MCS was rotated will be resolved by code changes made to the
upcoming release of our software NX 9.0. You may be able to work around this in earlier
releases by editing the template part and turning on the inheritance of "Tool Axis Type" for
the operation.
6816415
Siemens PLM believes that the problem you reported where spun outline creation for the
given solid body failed will be resolved by code changes made to the upcoming release of
our software NX 9.0.
6817267
Siemens PLM believes that the problem you reported where updating spreadsheet does not
cause modified state, will be resolved by code changes made to the upcoming release of our
software NX 9.0.
6817441
Siemens PLM believes that the problem you reported where Offset In Face is extremely
slow, will be resolved by code changes made to the upcoming release of our software NX
9.0.
6819003
Siemens PLM believes that the problem you reported where removing dimensions were
causing over-defined status, will be resolved by code changes made to the upcoming
release of our software NX 9.0.
6821135
Siemens PLM believes that the problem you reported where sketch curves get de-selected
when changing constraint types, will be resolved by code changes made to the upcoming
release of our software NX 9.0.
6821536
Siemens PLM believes that the problem you reported where an operation is selected,
Copy/Paste used to copy from one file to another and a link is maintained in the new file will
be resolved by code changes made to the upcoming release of our software NX 9.0.
6821544
Siemens PLM believes that the problem you reported where an internal error occurs when a
split body affects a wave linked face will be resolved by code changes made to the
upcoming release of our software NX 9.0 ip13.
6821767
Siemens PLM believes that the problem you reported where Discrepancies in .ODB Import
Between NX and Abaqus will be resolved by code changes made to the upcoming release of
our software NX Advanced Simulation, version 9.0. Development indicated the following:
The unknown results and will be displayed in Post but these results will be unitless.
6823179
Siemens PLM believes that the problem you reported where a signal 11 error was received
when converting to independent detail view, will be resolved by code changes made to the
upcoming release of our software NX 9.0.
6824452
Siemens PLM believes that the problem you reported where resulting spun outline is not
correct for 1 face as it was not revolved about center, will be resolved by code changes
made to the upcoming release of our software NX 9.0.
6825491
Siemens PLM believes that the problem you reported where the Bridge Curve function
behavior did not match the Help Documentation will be resolved by code changes made to
the upcoming release of our software NX 9.0.
6825574
Siemens PLM believes that the problem you reported where an exception occurs when
displaying a non-rectangular member view for which the vertices of the boundary polygon
are all equal will be resolved by code changes made to the upcoming release of our software
NX 9.0.
6826334
Siemens PLM believes that the problem you reported where saving parts in a session raised
the message: "The BVR has a newer version in Teamcenter than in this session", will be
resolved by code changes made to the upcoming release of our software NX 9.0.
6828069
6828553
Siemens PLM believes that the problem you reported where the post Review Tool does not
launch when using library tools will be resolved by code changes made to the upcoming
release of our software NX 9.0.
6830190
Siemens PLM believes that the problem you reported where poor performance occurs when
deleting elements will be resolved by code changes made to the upcoming release of our
software NX 9.0.
6830452
Siemens PLM believes that the problem you reported where the need to Document that
performing a Rectangle to select faces will *NOT* use the "Face Rule" setting, i.e "Tangent
Faces" and will use "Single Face" as the Rule. will be resolved by code changes made to the
upcoming release of our software NX 9.0.
6830495
Siemens PLM believes that the problem you reported where not all of the text will extrude on
the surface will be resolved by code changes made to the upcoming release of our software
NX 9.0.
6831174
Siemens PLM believes that the problem you reported where there is no documentation on
the Excel ribon addin, will be resolved by code changes made to the upcoming release of
our software 9.0 Customer can access the requested document in the NX Help document
installed with NX using the following path Home > Fundamentals > Managing data with
spreadsheets > Spreadsheets > Menu Reference.
6831824
Siemens PLM believes that the problem you reported where a PNG image is inserted into a
drawing as a black square will be resolved by code changes made to the upcoming release
of our software NX 9.0.
6831985
Siemens PLM believes that the problem you reported where the SDI Print Master UI does
not correctly pass information between NX and the various tabs in the Print Master
Application, will be resolved by code changes made to the upcoming release of our software,
NX 9.0.
6832248
Siemens PLM believes that the problem you reported where the NX Open C API function
UF_FORGEO_register_surface returned a 0 indicating success, even though the required
"foreign_geometry" license was not found, will be resolved by code changes made to the
upcoming release of our software NX 9.0.
6832744
position. However, components that exist in the replacement part (78-8083-2286-7.prt) but
not in the original part (78-8083-2286-7_1.prt) will be placed in a non-exploded position and
this "appears" to be incorrect- one example is 78-8083-2682-7.prt. Most importantly, since
some components maintain the original exploded positions while others do not, the
assembly does not come in as a cohesive unit. Unfortunately the only way to guarantee this
workflow is to have the original sub-assembly and the replacement sub-assembly have
exactly the same structure - where all components are versions of the components in the
original assembly. The lack of NX documentation for the Replace Component in the
Assemblies Help needed to include exploded views in the list of relationships that NX tries to
maintain when you replace a component is fixed in release NX 9.0. Also on the same page,
in the list of relationships that NX tries to maintain when the original and replacement items
are versions of each other, development added exploded views of components when a
subassembly is being replaced by another subassembly that is a version of the original one.
6833079
Mapping of SIZE and LENGTH in Fastener Assembly Library does not work.
6833789
6833812
Siemens PLM believes that the problem you reported where a CSE Simulation shows the
G73 cycle Z depth feeding too deep and displays errors will be resolved by code changes
made to the upcoming release of our software NX 9.0.
6834728
Siemens PLM believes that the problem you reported where a POST action assigned to the
UG_MATERIAL_ASSIGN button (Tools-> Materials-> Assign) ran before the standard dialog
rather than after will be resolved by code changes made to the upcoming release of our
software NX 9.0.
6834881
6834882
Siemens PLM believes that the problem you reported where a mom TCL error was
generated when trying to create a GMC op with a users default file will be resolved by code
changes made to the upcoming release of our software in NX 9.0.
6836440
Siemens PLM believes that the problem you reported where the material attribute is set and
locked even though a material is not assigned will be resolved by code changes made to the
upcoming release of our software NX 9.0.
6836607
Siemens PLM believes that the problem you reported where a better explanation for
Chamfer function using Asymmetric Cross Section was needed, will be resolved by code
changes made to the upcoming release of our software NX 9.0 The following are added : *
Added new figures to show basic differences between the two chamfer offset methods. *
Adapted the figure from the PR of the cross-section surface that showed how the "offset
faces and trim" offset method creates a chamfer, and added it to the chamfer dialog options
help. Added figure callouts to the graphic and additional text after the graphic clarifying the
method. Details include why distances may be different than those entered when using
asymmetric offsets on contoured surfaces with this offset method.
6837227
Siemens PLM believes that the problem you reported where removing "RevID" from the list
of parts in the ReuseLibraryFasteners.xml file prevented the Parts from being displayed in
the Fastener Configuration, will be resolved by code changes made to the upcoming release
of our software NX 9.0.
6837531
Siemens PLM believes that the problem you reported where it was not possible to select two
Promoted bodies for a boolean Unite operation, will be resolved by code changes made to
the upcoming release of our software NX 9.0.
6837887
Siemens PLM believes that the problem you reported where it is not possible to remove
Permanent Tool Display objects from a manufacturing part file will be resolved by code
changes made to the upcoming release of our software NX 9.0.
6840504
Siemens PLM believes that the problem you reported where for 'Spring-Dashpot Resultant'
Moment output for CBUSH elements in NX8.5, when the 'List Selection to Information
Window' or the 'List selection to Spreadsheet' buttons in the 'Identify' dialog are used, MZZ
gets incorrectly listed as MXX, MXX gets incorrectly listed as MYY and MYY gets incorrectly
listed as MZZ will be resolved by code changes made to the upcoming release of our
software NX 9.0.
6840895
Siemens PLM believes that the problem you reported where a program had no method to
find out if there were any errors when calling the method NXOpen.Validate > Validator >
Commit, will be resolved by code changes made to the upcoming release of our software NX
9.0. A new NXOpen API GetLastErrorListFromCommit can be used to get the exceptions.
6841358
6841670
Siemens PLM believes that the problem you reported where the same node can be selected
for both Source and Target sets of an RBE element creation when the target set is selected
via 'Nodes by Group' seletion method will be resolved by code changes made to the
upcoming release of our software NX 9.0.
6842483
CreateUdeByName failing.
6842569
Siemens PLM believes that the problem you reported where geometry was missing when
opening a SolidWorks file in NX, will be resolved by code changes made to the upcoming
release of our software NX 8.5.2 and NX 9.0.
6842603
Siemens PLM believes that the problem you reported where a bitmap doesn't appear in the
dialog after renaming it at the o/s level will be resolved by documentation changes made to
the upcoming release of our software NX 9.0. The following note has been added to the NX
9.0 documentation: You must restart NX to see a bitmap if it is added to the operating
system during the current session, or its name is changed during the current session.
6843272
Siemens PLM believes that the problem you reported where Weld mesh using spot weld
points created in CAD not working correctly will be resolved by code changes made to the
upcoming release of our software NX Advanced Simulation Version 9.0. In NX 9.0 there is
no signal 11. The command is popping up a message and gracefully exiting.
6843361
Siemens PLM believes that the problem you reported where Snap Point Toobar options get
disabled when creating a line. will be resolved by code changes made to the upcoming
release of our software NX 9.0.
6843866
Siemens PLM believes that the problem you reported where the NX Nastran keyword
"old=yes" doesn't save the .op2 file when submitted from NX, however it does in standalone
mode, will be resolved by code changes made to the upcoming release of our software NX
9.0.
6844120
Siemens PLM believes that the problem you reported where Auto Matching was not working
with a Reusable Component, will be resolved by code changes made to the upcoming
release of our software NX 9.0.
6844189
Siemens PLM believes that the problem you reported where geometry was not exported to
STEP, will be resolved by code changes made to the upcoming release of our software NX
8.5.2 and NX 9.0 and the next available maintenance packs for NX 8.0.3 and NX 8.5.1.
6844669
Siemens PLM believes that the problem you reported where Spline path end node is not
deleted after undo using Control D in Routing will be resolved by code changes made to the
upcoming release of our software NX 9.0
6845472
Siemens PLM believes that the problem you reported where mass property display when the
analysis units are not in part units will be resolved by code changes made to the upcoming
release of our software NX 9.0.
6846120
Siemens PLM believes that the problem you reported where Save As to Different Item
Revision from NX of drawing points to wrong Item will be resolved by documentation
changes made to the upcoming release of our software NX 9.0. The following clarification
will be added for this process: Allow Save As Non-Master to a Different Item You can save a
non-master file to a different master than it was associated with originally, or to a different
item revision within the same item (master). If you save a non-master to a different revision
within the same item, you keep the master-model relationship. If you save a non-master to a
different master, you still keep the master-model relationship to the original master and not
the new master. To create the master-model relationship with the new master, make the
non-master the work part. In the Assembly Navigator, right-click the old master, which is
shown as subordinate to the non-master, and choose Replace Component, then select the
new master as the replacement.
6846167
6847149
Siemens PLM believes that the problem you reported where while using the 'Show and Hide'
command in a sim file, generated by importing an input deck, selecting hide (minus sign) for
'Geometry' correctly hides the fem file in the graphics screen and in the simulation navigator
but the '3D Collectors', 'PSOLID1' and '3d_mesh(1)' in the Simulation navigator are all
checked ON will be resolved by code changes made to the upcoming release of our
software NX 9.0.
6847185
Siemens PLM believes that the problem you reported where the mesh is displayed when the
component is turned on even if the mesh collector is turned off will be resolved by code
changes made to the upcoming release of our software in NX Advanced Simulation Version
9.0.
6847239
Siemens PLM believes that the problem you reported where import of Abaqus input file fails
due to wrong handling of *HYPERFOAM will be resolved by code changes made to the
upcoming release of our software NX 9.0.
6847308
Siemens PLM believes that the problem you reported where creating a datum on a
dimension causes the leader to be attached incorrectly to the text box will be resolved by
code changes made to the upcoming release of our software NX 9.0 and later releases.
6849039
Siemens PLM believes that the problem you reported where customizing a new button to run
a journal and the path to the journal gets truncated, will be resolved by code changes made
to the upcoming release of our software NX 9.0.
6849781
Siemens PLM believes that the problem you reported where Routing Stock Characteristics
not being assigned to stock component will be resolved by code changes made to the
upcoming release of our software NX 9.0.
6849844
Siemens PLM believes that the problem you reported where the documentation for FBM
feature teacher - says CSYS - should be Datum CSYS will be resolved by code changes
Siemens PLM believes that the problem you reported where the documentation regarding
the "Context" of the Component Properties Attributes tab was insufficient, will be resolved by
code changes made to the upcoming release of our software NX 9.0.
6850664
Siemens PLM believes that the problem you reported where you received "The region must
be completely inside the sheet", when attempting to add a Template Region to an Inch
drawing while in a Millimeter part file, will be resolved by code changes made to the
upcoming release of our software NX 9.0.
6851318
Siemens PLM believes that the problem you reported where the tool querry fails - exact
numeric value after upgrade of MRM in TCE to TC8.3.3 will be resolved by code changes
made to the upcoming release of our software NX 9.0. In the event hanlder
dbc_inclass_tlas.tcl,the proc INCLASS_tlas_exec_qry_for_count would not work for an exact
or == query unless you add these few lines ( taken from the mrl event handler ) # "Library
units" that were selected by the user (Millimeter = 0, Inch = 1) global dbc_search_units #
Added next 2 lines lappend query_left -630 lappend query_right $dbc_search_units set
num_atts [llength $query_left] set tool_group $group set tool_class $class set tool_subclass
$subclass set db_ret_code [INCLASS_get_count $class $subclass $num_atts $query_left
$query_right].
6851597
Siemens PLM believes that the problem you reported where free field data with more than
16 characters will not import from a Nastran input file will be resolved by code changes
made to the upcoming release of our software NX 8.5.2.
6852088
Siemens PLM believes that the problem you reported where Mirrored assembly component
names are incorrect will be resolved by code changes made to the upcoming release of our
software NX 8.5.3, NX 9.0, and in the next MP of 8.0.3. The Component Names for the
resulting components were being generated from the part name of the existing source part
regardless of whether the Component Name had been previously overridden. The new
behavior provided by this fix is to only generate a new Component Name using the original
part name if the Component Name has not yet been overridden. On the other hand, if the
Component Name has been overridden on the source component, the new, mirrored
component should receive the same Component Name as its source.
6852124
Siemens PLM believes that the problem you reported where converting between an NX
Faceted body and a JT Faceted body did not work will be resolved by code changes made
to the upcoming release of our software NX 9.0.
6852324
6852476
Siemens PLM believes that the problem you reported where the user had to hit escape twice
to de-select the object when all buttons were removed from the shortcut toolbar will be
resolved by code changes made to the upcoming release of our software NX 9.0.
6852948
Siemens PLM believes that the problem you reported where the order of the options within
the Motion pull down menus are not consistent between the Move Object and Move
Component dialogs, will be resolved by code changes made to the upcoming release of our
software NX 9.0.
6853285
Review tool fails with 'Can't open data file' error when using library tools.
6853296
Siemens PLM believes that the problem you reported where Geometry is missing when
opening a SolidWorks file in NX 8.5.1 will be resolved by code changes made to the
Siemens PLM believes that the problem you reported where Assembly Label Manager 'Additional top Offset' not working correctly will be resolved by code changes made to the
upcoming release of our software NX 9.0.
6856033
Siemens PLM believes that the problem you reported where the Clamp/Unclamp code is
incorrectly output with the ROTATE (Reference Only) UDE will be resolved by code changes
made to the upcoming release of our software NX 9.0. Existing posts need to be resaved in
PB v9.0 to incorporate the changes. A revised post was provided to the customer as
workaround.
6857128
Siemens PLM believes that the problem you reported where operations are flagged as out of
date each time a part file is reopened will be resolved by code changes made to the
upcoming release of our software NX 9.0. The behavior is being caused by the system
reporting a number of geometry objects linked to Manufacturing objects being flagged for
deferred update. As part of a number of Design projects being released in NX 9.0, the
testing for deferred update objects is refined and the objects causing this behavior no longer
are reported. The scope of these projects is too large to make back-porting them to an MP
against NX 8.5 feasible.
6857147
Siemens PLM believes that the problem you reported where a UDO is reported to have an
invalid link type will be resolved by code changes made to the upcoming release of our
software NX 9.0.
6857210
6858808
Siemens PLM believes that the problem you reported where a Non Cutting Moves Engage
that uses a negative arc angle results in errors will be resolved by code changes made to the
upcoming release of our software NX 9.0.
6859166
6859951
Siemens PLM believes that the problem you reported where we need a better explanation of
'OFFSET' and how it is applied will be resolved by code changes made to the upcoming
release of our software NX Advanced Simulation Version 9.0. A graphic was added to the
Load Pattern dialog box in NX 9.0 to explain what offset is applied.
6859991
Siemens PLM believes that the problem you reported where Product Template Studio does
not warn the user when the Fetch Component statement in a visual rule is fed directly to the
Replace Component statement, will be resolved by code changes made to the upcoming
release of our software NX9.0. The problem with connecting the output of a fetch component
to the input of replace component has been addressed in NX 9.0. PTS will no longer allow
that connection and it will issue a message saying that the types do not match.
6861332
Siemens PLM believes that the problem you reported where Object Specific information in
the Help documentation was not complete will be resolved by code changes made to the
upcoming release of our software NX 9.0.
6861823
Siemens PLM believes that the problem you reported where the NX documentation
incorrectly referenced a file named ugweld.dpv, will be resolved by code changes made to
the upcoming release of our software NX 9.0.
6862403
Siemens PLM believes that the problem you reported where opening a document from a
menu button causes NX to wait for the document to close will be resolved by documentation
changes made to the upcoming release of our software NX 9.0. The documentation did not
explain how to open a document in the background for Windows. The 'Actions' topic in the
Menuscript User's Guide has been updated.
6863906
Siemens PLM believes that the problem you reported where the documentation for the Block
UI Styler was not clear will be resolved by code changes made to the upcoming release of
our software NX 9.0.
6863957
Siemens PLM believes that the problem you reported where Identification symbol not
updating with callout value, will be resolved by code changes made to the upcoming release
of our software NX 9.0. The problem where sufficient information is not documented for the
UGII_UPDATE_ALL_ID_SYMBOLS_WITH_PLIST environment variable is fixed in NX 9.0.
The following content was added to the definition of the variable: "If this environment variable
is set to 0, empty balloon symbols associated to a component will not update with the parts
list number for the component." And in the activity that describes how to add and update
manual balloon symbols, the following note was added: "If the callout symbols do not update
with a part list number, make sure you set the parts list environment variable
UGII_UPDATE_ALL_ID_SYMBOLS_WITH_PLIST = 1 in your NX session."
6864951
Siemens PLM believes that the problem you reported where a Sketch did not update when
moving its defining plane will be resolved by code changes made to the upcoming release of
our software NX 9.0.
6864958
Siemens PLM believes that the problem you reported where material data was not imported
correctly from the assembly data to the polygon geometry will be resolved by code changes
made to the upcoming release of our software NX 9.0.
6865709
Siemens PLM believes that the problem you reported where the user can not attach a datum
feature symbol on a leader line, will be resolved by code changes made to the upcoming
release of our software NX 9.0.
6865865
Siemens PLM believes that the problem you reported where a User Defined Object (UDO)
did not pre-select and could not be selected when the cursor was over a shaded area
displayed using UF_DISP_display_facets, will be resolved by code changes made to the
upcoming release of our software NX 9.0.
6866345
Siemens PLM believes that the problem you reported where NX doesn't update Object
Attributes in Drafting Notes will be resolved by code changes made to the upcoming release
of our software NX 8.0.3 Rev and NX 9.0.
6866443
Siemens PLM believes that the problem you reported where additional documentation was
needed regarding the Context of Component Attributes, will be resolved by document
changes made to the upcoming release of our software NX 9.0.
6866787
Siemens PLM believes that the problem you reported where in a Wire EDM operation the
wire axis is incorrect if the MCS is not at the absolute coordinate system will be resolved by
code changes made to the upcoming release of our software NX 9.0.
6867314
Siemens PLM believes that the problem you reported where Product Template Studio routes
in Visual Rules are becoming disconnected on some statements and duplicated on others
when reopened, will be resolved by code changes made to the upcoming release of our
software NX 9.0.
6867720
Siemens PLM believes that the problem you reported where Solidworks files fail to open with
weldment data in NX 8.5 will be resolved by code changes made to the upcoming release of
Siemens PLM believes that the problem you reported where it was not documented that deselecting "Check Tool and Holder" displayed only flute length will be resolved by code
changes made to the upcoming release of our software NX 9.0.
6868095
Internal error occurs when invoking a GRIP program from a User Tool menu.
6868131
Siemens PLM believes that the problem you reported where the unexpected behavior of
Break-out section and Detailed Thread in ANSI DETAIL will be resolved by code changes
made to the upcoming release of our software NX 9.0.
6868168
Siemens PLM believes that the problem you reported where the Full Screen toolbar no
longer displayed the "Drafting" tab when switching Applications from Modeling to Drafting in
full Screen Mode, will be resolved by code changes made to the upcoming release of our
software NX 9.0.
6868599
6868655
Generic Motion operation can not be opened or created when ISV machine is loaded.
6868828
6869363
Siemens PLM believes that the problem you reported where PMI Custom Symbol Is Not
Scaled To Match 2D View Scale Ratio will be resolved by code changes made to the
upcoming release of our software NX 9.0.
6870500
6871843
Siemens PLM believes that the problem you reported where there are incorrect values for
the R_SPARK, S_SPARK, and F_SPARK in the Electrode Wizard will be resolved by code
changes made to the upcoming release of our software NX 9.0.
6872088
Siemens PLM believes that the problem you reported where an assembly failed to load due
to the presence of constraints in the assembly that were flagged as constraint-reassociatepending and the load failing to find or configure the immediate parent of the component that
needed to have constraint reassociation processing performed, will be resolved by code
changes made to the upcoming release of our software NX 9.0.
6873342
Siemens PLM believes that the problem you reported where commit on
governmentSecurityInformationBuilder causes crash will be resolved by code changes made
to the upcoming release of our software NX 8.5.3 IP1 and NX 9.0 ip13.
6873657
Siemens PLM believes that the problem you reported where the NXOpen.PDM > PartBuilder
> createPartSpec Java method failed when used from a callback (Menu Event Handler), will
be resolved by code changes made to the upcoming release of our software NX 9.0.
6874351
Siemens PLM believes that the problem you reported where the Spun Outline shows a very
small taper when using 'Automatic' will be resolved by code changes made to the upcoming
release of our software NX 9.0.
6874355
Siemens PLM believes that the problem you reported where a datum feature symbol jumps
to incorrect origin on leader stub, will be resolved by code changes made to the upcoming
release of our software NX 9.0.
6874479
Siemens PLM believes that the problem you reported where a return of 1 from the Apply
callback of a Block UI Styler application caused NX to automatically raise an error message,
will be resolved by code changes made to the upcoming release of our software NX 9.0.
6874528
Siemens PLM believes that the problem you reported where Drawing loses edges from
model when drawing view has Extracted Edges toggled ON, will be resolved by code
changes made to the upcoming release of our software NX 9.0.
6875049
Siemens PLM believes that the problem you reported where the Response Simulation
tutorial with the EIGRL card changed from 10 modes to 0 to 100 Hz. gave no stress output
will be resolved by code changes made to the upcoming release of our software NX 9.0.
6875626
Siemens PLM believes that the problem you reported where fillet fails for a value of 0.025,
will be resolved by code changes made to the upcoming release of our software NX 9.0.
6875719
6875770
Siemens PLM believes that the problem you reported where Model Setup check incorrectly
triggers "Unconnected Error" when component FEM's are connected via MPC will be
resolved by code changes made to the upcoming release of our software NX 9.0.
6876729
6876921
Siemens PLM believes that the problem you reported where the Knowledge Fusion
documentation page Boolean Expressions needed to state that "Parentheses around
individual tests are required for proper evaluation", will be resolved by code changes made
to the upcoming release of our software NX 9.0.
6877603
Siemens PLM believes that the problem you reported where using the "Assign" button for
the Booklet Revision replaces a manually entered Number, will be resolved by code changes
made to the upcoming release of our software NX 9.0.
6877679
The problem you reported where the return value of the NXOpen > BasePart > Leaf property
when working in TCIN (NX Manager) mode changed unexpectedly to include the revision for
master parts has been investigated and was found to have been caused by a fix for a related
problem. The current behavior is and will continue to be the designed behavior so the
documentation for NX 9.0 has been updated accordingly.
6877896
Siemens PLM believes that the problem you reported where element extrude along a helical
curve generates distorted elements will be resolved by code changes made to the upcoming
release of our software NX 9.0.
6878212
Siemens PLM believes that the problem you reported where the Show Hide dialog is missing
the Drafting Annotation Notes option will be resolved by code changes made to the
upcoming release of our software NX 9.0.
6878325
Siemens PLM believes that the problem you reported where the NXOpen.Annotations >
CustomSymbolCollection > CreateCustomSymbol method no longer creates the symbol
using the specified CustomSymbolTextData yet there was no indication in the
documentation that this method is deprecated will be resolved by code changes made to the
upcoming release of our software NX 9.0. Please continue to use the new
DraftingCustomSymbolBuilder instead.
6879056
Siemens PLM believes that the problem you reported where the NXOpen.PDM > PartBuilder
> CreatePartSpec method threw NXExceptions which did not have informative Messages
will be resolved by code changes made to the upcoming release of our software NX 9.0.
6879618
Siemens PLM believes that the problem you reported where while exporting a specific .sim
file as an Abaqus .inp file, NX starts gobbling up computer's memory until it crashes will be
resolved by code changes made to the upcoming release of our software NX 9.0.
6880422
Siemens PLM believes that the problem you reported where the NXInputBox methods did
not recognize <Enter> or the middle-mouse button as OK like other NX dialogs do will be
resolved by code changes made to the upcoming release of our software NX 9.0.
6880463
Siemens PLM believes that the problem you reported where an Internal Error is returned if
the holder_database.dat is selected for conversion will be resolved by code changes made
to the upcoming release of our software in NX 9.0.
6881627
Siemens PLM believes that the problem you reported where the Documentation for 'Convert
Tool Library' is confusing will be resolved by changes made to the documentation in our
upcoming release of our software in NX 9.0. The NX 9.0 Convert Tool Library documentation
will now read: If you work in a native NX environment and customize your tool libraries, you
must convert your customized English and metric xxx_database.dat file so that it is formatted
for the NX release to which you are upgrading. xxx_database.dat represents
tool_database.dat. When you convert the tool_database.dat, holder_database.dat,
segmented_tool_databse.dat, and trackpoint_database.dat are converted automatically.
6882310
Siemens PLM believes that the problem you reported where a Help document contains a link
to another page for more information, but the target page does not contain any information
on the subject will be resolved by code changes made to the upcoming release of our
software NX 9.0.
6882354
Siemens PLM believes that the problem you reported where the technical documentation of
the behavior of Top and Bottom UIStyler dialogs was not correct will be resolved by code
changes made to the upcoming release of our software NX 9.0.
6882387
Siemens PLM believes that the problem you reported where an environment variable could
not be used to specify the output file path when using the NXOpen >
PhysicalMaterialCollection > InfoLibraryMaterialToFile method and a confusing error was
raised when the given path was not valid will be resolved by code changes made to the
upcoming release of our software NX 9.0.
6882729
Siemens PLM believes that the problem you reported where annotation modifications are not
saved in the PostView template will be resolved by code changes made to the upcoming
release of our software NX 9.0.
6883147
Siemens PLM believes that the problem you reported where Part cleanup has alerts: "start
limit no longer intersects chain 1" and "start limit no longer intersects chain 3" , when Part
Cleanup is done on a part in Drafting only will be resolved by code changes made to the
upcoming release of our software NX 9.0.
6883235
Siemens PLM believes that the problem you reported where reference to TCIN
documentation was missing in the 'Fundamentals -> Working with files -> Elements of a new
part template' documentation will be resolved by code changes made to the upcoming
release of our software NX 9.0. A Master Model Approach topic has been added to the
Elements of a new part template topic.
6883665
Siemens PLM believes that the problem you reported where NX was incorrectly scaling
thermal capacitances will be resolved by code changes made to the upcoming release of our
software NX 9.0.
6884156
Siemens PLM believes that the problem you reported where adding Sheets and Zone to a
view label adds the Sheet and Zone of the location of the label of the section view (or detail
view) rather that the location of the section line (or detail view boundary) in the associated
parent view, will be resolved by documentation changes made to the upcoming release of
our software NX 9.0. The functionality is working as designed, and is meant to track the
location of the detail view, not the parent view. A more appropriate way to locate the parent
of a detail view is to right-click the detail view node in the Part Navigator and select
"Navigate to Parent View". However, the following procedure can be used to add parent view
information to the detail view label.
1. From the Edit Text command, select the detail/section view label.
2. Select the Text Editor button and choose the Relationships tab.
3. Click the Insert Sheet Zone button
4. In Sheet Zone Reference dialog, turn on Show All Views in Drawing.
5. Select the parent view from the view list and required attributes.
6. Click OK or Close on all dialogs
7. Parent view location will get displayed in section/detail view label.
Note that if the style of the detail view label is changed, the added information will be
deleted. This procedure was also added to the Drafting Help in NX 9.0.
6884234
Siemens PLM believes that the problem you reported where an Export PDF as Text
operation gives incorrect result for letter B will be resolved by code changes made to the
upcoming release of our software NX 9.0.
6884238
Siemens PLM believes that the problem you reported where Menuscript cannot hide the
STEP buttons will be resolved by code changes made to the upcoming release of our
software NX 9.0.
6884321
Siemens PLM believes that the problem you reported where an operation is always
appended to the end of a geometry group will be resolved by code changes made to the
upcoming release of our software NX 9.0. The algorithm to find a suitable insert position in
the geometry group when changing the geometry parent of an operation from inside the
dialog has been improved. It no longer adds the operation as last operation in the new
geometry group in all cases. Instead it tries to find a suitable position in the new geometry
group that avoids moving the operation in its program order group as much as possible
when the geometry view and the program order view are automatically synchronized.
Note this happens whenever an operation is moved to a group in the ONT or the geometry
parent is changed from inside the operation dialog. If you are particular about where in a
group an operation is moved to, we recommend that you move it in the Operation Navigator,
where you can place it in a specific position within a group.
6885918
Siemens PLM believes that the problem you reported where the DPM feed rate is bad when
we are doing combined Rotary output will be resolved by code changes made to the
upcoming release of our software in Post Builder NX 9.0. Customers will need to re-import
the custom commands into the posts in question from "pb_cmd_combine_rotary.tcl"
(postbuild/pblib/custom_command). pb_cmd_combine_rotary.tcl is also uploaded to PR data
for users to fix the same problem with existing posts.
6886380
Siemens PLM believes that the problem you reported where Cavity Mill operations won't
transform and are flagged as edited because of the IPW, will be resolved by code changes
made to the upcoming release of our software in NX 9.0.
6888105
Tom Hillrich (GTAC) has spoken to the client regarding this PR and the EC request. Client
states the issue has been resolved and the PR can be closed. The client has explicitly
denied export of this data.
6888230
6888404
Direct Sketch editing does not show sketch objects if layer(s) are invisible.
6889563
Siemens PLM believes that the problem you reported where polygon body renaming in the
sim does not reflect this name in the fem file will be resolved by code changes made to the
upcoming release of our software NX 9.0.
6889868
6889874
Siemens PLM believes that the problem you reported where "SSL: NX launch from 4-tier
RAC fails w/Need to have TC_ROOT/IMAN_ROOT defined.." The problem where a note
needs to be added to ensure that the UGII_UGMGR_COMMUNICATION environment
variable is set correctly is fixed in release NX 9.0.
6890718
Siemens PLM believes that the problem you reported where you received a fatal error 3032
when setting up the second load case will be resolved by code changes made to the
upcoming release of our software NX Advanced Simulation Version 9.0.
6890728
Siemens PLM believes that the problem you reported where Weld Datum was not using the
preference "Part Number" title will be resolved by code changes made to the upcoming
release of our software NX 9.0.
6891317
Siemens PLM believes that the problem you reported where Tool Path display does not
inherit the Method color settings with Cavity Mill will be resolved by code changes made to
the upcoming release of our software NX 9.0.
6891974
Need documentation for Linear Interpolation options 'Rotary Angle' / 'Tool Axis'
6892045
Siemens PLM believes that the problem you reported where running a macro via a toolbar
button ignores setting a selection filter, will be resolved by code changes made to the
upcoming release of our software NX 9.0 and included in an NX 8.5.1 MP1 patch.
6892738
Siemens PLM believes that the problem you reported where durability ignores physical
property tables with double quote character will be resolved by code changes made to the
upcoming release of our software NX 9.0.
6893072
Siemens PLM believes that the problem you reported where specifying "Rough Feed Rates"
in a Rough Turn operation produced no cut motion will be resolved by code changes made
to the upcoming release of our software NX 9.0.
6893079
Siemens PLM believes that the problem you reported where the Thicken dialog raises a
Check-mate error will be resolved by code changes made to the upcoming release of our
software NX 9.0. The Check-mate missing diagnostic message will now be reported only
once per session.
6893353
Siemens PLM believes that the problem you reported where the NX Online Help needs to be
updated with regards to the NX dialog changes for the Temperature Load case control data,
will be resolved by documentation changes made to the upcoming release of our software
NX Advanced Simulation, version 9.0
6893570
6893748
Siemens PLM believes that the problem you reported where User Defined Symbols
disappear when the symbol is placed on both sides of a leader, will be resolved by code
changes made to the upcoming release of our software NX 9.0.
6893773
Siemens PLM believes that the problem you reported where the user received the wrong
returned value for angle measurements while using design in context and referencing data
outside of the work part will be resolved by code changes made to the upcoming release of
our software NX 9.0.
6894243
Siemens PLM believes that the problem you reported where a user working in the Free Body
Diagram cannot pick an edge with an RBE associated to it will be resolved by code changes
made to the upcoming release of our software NX 9.0.
6894258
Siemens PLM believes that the problem you reported where "Documentation: NX Attribute
Mapping to a specific WF task using incorrect term" will be resolved by changes made to the
upcoming release of our software NX 9.0.
6895018
Siemens PLM believes that the problem you reported where an Internal Error occurred when
editing a deformable part will be resolved by code changes made to the upcoming release of
our software NX 8.5.3 and NX 9.0.
6895492
Siemens PLM believes that the problem you reported where a number is assigned but Excel
2013 does not display it properly will be resolved by code changes made to the upcoming
release of our software NX 9.0.
6895532
Siemens PLM believes that the problem you reported where NX crashes when using
Alt+0176 to insert a degree symbol in the tool description will be resolved by code changes
made to the upcoming release of our software in NX 9.0.
6896220
Siemens PLM believes that the problem you reported where you are unable to export the
tool to the library if the tool value is changed because the new libref is ignored will be
resolved by code changes made to the upcoming release of our software in NX 9.0.
6896231
Siemens PLM believes that the problem you reported where Flow Arrows in Routing Logical
did not move when the path was repositioned, will be resolved by code changes made to the
upcoming release of our software NX 9.0.
6896348
The problem where internal memory errors occur when exporting this model's bolt definition
for a Solution 601 has been fixed for NX 9.0 ip16. The problem is that Bolt preload, Bolt PreLoad(1), cannot be exported because SOL 601 does not support bolts defined using nodes
attached to solid elements. In NX 8.5x, there is insufficient model checking to capture this
condition and NX is error in BC distribtion. The user has to fix their model regardless of the
version of NX being used.
6896971
Siemens PLM believes that the problem you reported where Control Point Event UDEs are
not being output in Wire EDM paths will be resolved by code changes made to the upcoming
release of our software NX 9.0.
6897417
Curve Text Dimensions are incorrect having changed Analysis > Units.
6897455
Operation reorders to the end of the Operation list when Geometry Group changed.
6898916
Siemens PLM believes that the problem you reported where legacy part failed to playback in
NX 7.5 on SB_FLANGE will be resolved by code changes made to the upcoming release of
our software NX 9.0.
6899703
Siemens PLM believes that the problem you reported where the customer default for
extension height is not being read, will be resolved by code changes made to the upcoming
release of our software NX 9.0.
6900252
6900479
Siemens PLM believes that the problem you reported where the Check-Mate function
mqc_askDrawingViewStyle returned a value of NoValue for the values corresponding to line
widths (WIDTH_OF_SMOOTH_EDGE, WIDTH_OF_VISIBLELINE,
WIDTH_OF_HIDDENLINE, etc) if the width has been set to one of the new values in NX8.5
such as "0.13 mm" will be resolved by code changes made to the upcoming release of our
software NX 9.0.
6900605
Siemens PLM believes that the problem you reported where the command finder information
for Move Component refers to the obsolete Interaction assembly preference, will be resolved
by code changes made to the upcoming release of our software NX 9.0. The fix has been to
remove references to the obsolete Interaction assembly preference for Move Component,
Assembly Constraints, Show and Hide Constraints, Remember Assembly Constraints, Show
Degrees of Freedom and Convert Mating Conditions.
6900821
Siemens PLM believes that the problem you reported where "Part Family Assign Part
Number and subsequent Resume in NX PartFamily window doesn't raise Excel application
to foreground when there was another Excel application opened", will be resolved by code
changes made to the upcoming release of our software NX9. This is due to the way Excel
2013 opens a new workbook as MDI.
6902184
Siemens PLM believes that the problem you reported where the cut range in a Cavity Milling
operation does not update if the part geometry is changed will be resolved by code changes
made to the upcoming release of our software NX 9.0.
6902496
Siemens PLM believes that the problem you reported where you were unable to edit a
Teach Mode operation because you were getting 'First Curve neither arc nor line' will be
resolved by code changes made to the upcoming release of our software in NX 9.0. This
was caused by the spun outline results. That has been resolved in NX 9.0 as well, so after
re-creating the spun outline in NX 9.0, the error message will no longer appear.
6903630
Siemens PLM believes that the problem you reported where Solid Profile 3D Non-Cut
transfer moves have regression issues from NX 7.5 will be resolved by code changes made
to the upcoming release of our software in NX 9.0.
6903691
Siemens PLM believes that the problem you reported where Area Milling using extend at
edges causes memory and part overload will be resolved by code changes made to the
upcoming release of our software in NX 9.0.
6904347
Siemens PLM believes that the problem you reported where the documentation was missing
for Automation Package Deployment will be resolved by code changes made to the
upcoming release of our software NX 9.0.
6904535
Siemens PLM believes that the problem you reported where the Browse MOM variables has
'Synchronization' mispelled will be resolved by code changes made to the upcoming release
of our software in NX 9.0.
6904545
Siemens PLM believes that the problem you reported where the descriptions for the
Members of the NXOpen > Expression > Expression.UnitsOption enumeration were
confusing, will be resolved by documentation changes made to the upcoming release of our
software NX 9.0.
6904594
Siemens PLM believes that the problem you reported where the Knowledge Fusion
documentation page "Reuse Knowledge Fusion functions in NX expressions" needed to
provide more information, will be resolved by documentation changes made to the upcoming
release of our software NX 9.0.
6904657
Siemens PLM believes that the problem you reported where a 'Bad Exel Callback' error
appears when updating part family members using Office2013 will be resolved by code
changes made to the upcoming release of our software NX 9.0.
6905122
Siemens PLM believes that the problem you reported where Regenerate All did not
regenerate an instance of a Knowledge Fusion class which had undergone a version change
will be resolved by code changes made to the upcoming release of our software 9.0. The
regeneration can also be done automatically at part load but changing the Knowledge
Fusion Customer Default "Load Application Package / Native DFA Versions with Part" from
"As Saved" to "Use Latest Package or Version". To prevent the duplicate class warnings
when reloading dfa files set the environment variable
UGII_KF_NO_DUPLICATE_WARNING to "1".
6905656
Siemens PLM believes that the problem you reported where Display Center of Rotation
setting not retained will be resolved by code changes made to the upcoming release of our
software NX 9.0 In NX 9.0, a customer default is added under, Gateway -> Visualization,
View/Screen, Rotation, Display Center of Rotation. Additionally, the following text will be
added to the NX 9.0 on-line documentation Visualization Preferences View/Screen page for
the "Display Center of Rotation" setting: Set the corresponding Customer default (Gateway>Visualization, View/Screen, Rotation, Display Center of Rotation) to control the initial value
of this preference setting across NX sessions.
6906322
Siemens PLM believes that the problem you reported where ABAQUS solid elements not
imported will be resolved by code changes made to the upcoming release of our software
NX Advanced Simulation Version 9.0.
6906636
Siemens PLM believes that the problem you reported where generating a Solid Profile 3D
operation that has "Multiple Side Passes" defined produces an internal error will be resolved
by code changes made to the upcoming release of our software NX 9.0.
6906931
Siemens PLM believes that the problem you reported where the Planar Text depth of cut
value does not appear in the "Depth of Cut" column in the ONT, will be resolved by code
changes made to the upcoming release of our software NX 9.0.
6907249
Siemens PLM believes that the problem you reported where the NX Open C API function
UF_ATTR_delete returns 1105048 "The specified attribute does not exist" for missing
attributes will be resolved by code changes made to the upcoming release of our software
NX 9.0.
6908241
Siemens PLM believes that the problem you reported where, the Model Setup Check gives
the erroneous message: "WARNING Some "CBUSH" elements in mesh "cbush:
connection_mesh(54)" do not have an orientation specified. ACTION: Define an orientation
for the mesh in the "Edit Mesh Associated Data" dialog or define an orientation for each of
the elements using Element Associated Data.", when the CBUSH Orientation is defined
using the V-vector method will be resolved by code changes made to the upcoming release
of our software NX Advanced Simulation, version 9.0.
6908583
Siemens PLM believes that the problem you reported where import of bsurf cards into NX
adds extra faces to contact regions will be resolved by code changes made to the upcoming
release of our software NX 8.5.3 and NX 9.0.
6908879
Siemens PLM believes that the problem you reported where Feature playback fails on Bend
Taper(5) after part is saved will be resolved by code changes made to the upcoming release
of our software NX 9.0.
6909217
Siemens PLM believes that the problem you reported where creating a UDE by name in
C#.net is not working will be resolved by code changes made to the upcoming release of our
software in release NX 9.0.
6910258
Siemens PLM believes that the problem you reported where NX created twisted 3D HEX
elements will be resolved by code changes made to the upcoming release of our software
NX 9.0.
6912065
Siemens PLM believes that the problem you reported where a heat load had no effect when
using a fluid domain and the option about inner region to mesh through, will be resolved by
code changes made to the upcoming release of our software NX 9.0.
6915535
Siemens PLM believes that the problem you reported where a non-default value for
NXSTRAT parameter MSFAC is not used will be resolved by code changes made to the
upcoming release of our software NX Advanced Simulation Version 8.5.3 and 9.0.
6916165
Siemens PLM believes that the problem you reported where the documentation for
outputting Measurement Points from the Turning Test Cut routine needs to be improved will
be resolved by code changes made to the upcoming release of our software NX 9.0.
6916559
Siemens PLM believes that the problem you reported where modifying the Thread using
'Edit Parameters' will result in the drawing dimensions to become retained will be resolved
by code changes made to the upcoming release of our software NX 9.0.
6917128
Siemens PLM believes that the problem you reported where Move Face in NX 8.0.3 fails to
work like NX 7.5.4 will be resolved by code changes made to the upcoming release of our
software NX 9.0.
6917888
Siemens PLM believes that the problem you reported where a Sew attempt displays the
message "Some sheets disjoint from target" when edges are within tolerance will be
resolved by code changes made to the upcoming release of our software NX 9.0.
6918263
Siemens PLM believes that the problem you reported where the existing NAME and DESC
attributes are not copied when a CAE structure is cloned to new revisions using the
Simulation Navigator Clone command will be resolved by code changes made to the
upcoming release of our software NX 9.0.
6919137
Siemens PLM believes that the problem you reported where when using Mesh Control, Weld
Row and the lock symbol is missing on the weld row mesh will be resolved by code changes
made to the upcoming release of our software NX 9.0.
6921267
Siemens PLM believes that the problem you reported where it is not possible to select a
radial fillet or chamfer faces for PMI dimensions, will be resolved by documentation changes
made to the upcoming release of our software NX 9.0. The problem where NX
documentation of the PMI Chamfer Dimension command did not mention that the chamfer
surface must be planar has been fixed in release NX 9.0. Documentation of the PMI
Chamfer Dimension command uses examples that show the command's applicability to a
planar chamfer, and mentions that the chamfer surface must be planar.
6921383
Cavity Mill operation does not recognize IPW of Instanced tool path.
6924930
Siemens PLM believes that the problem you reported where the warning "Unable to create
body" is raised when adding a Flat Solid feature from a sheet metal body if Mirrored and
United, will be resolved by code changes made to the upcoming release of our software NX
9.0.
6925004
The problem where additional documentation needs to be added to the GRM mapping
syntax to highly recommend using the object-type option is fixed in release NX 9.0.
6926100
Siemens PLM believes that the problem you reported where Exported PDF is corrupt if text
output is set to Text will be resolved by code changes made to the upcoming release of our
software NX 8.5.3 and NX 9.0.
6927740
Siemens PLM believes that the problem you reported where Extrude changing boolean type
after update will be resolved by code changes made to the upcoming release of our software
NX 9.0.
6927780
Siemens PLM believes that the problem you reported where Solid from Solid Edge import
remains highlight and unable to de-select will be resolved by code changes made to the
upcoming release of our software NX 9.0.
6927991
Siemens PLM believes that the problem you reported where the performance of updating a
Pattern Feature is slower than expected will be resolved by code changes made to the
upcoming release of our software NX 9.0.
6930265
Generate PSD Disp from Accel creates new function in wrong units.
Description
1731187
1785309
1786510
Add Existing Component with Preview OFF does not display Cylindrical CenterLine
1818129
NX Structure does not update Teamcenter CadBom when using custom item types
1822374
Centerline invisible for preview component in main window during constraint pick
1853289
1853294
1862151
1877035
1877181
1883711
1885095
OV NX8 CAM miss the "Display Direction Vectors" Toggle in Customer Defaults
1885424
1891074
1896313
1896327
1904532
1905424
Recognized Features are not valid after changing the Angle of a Datum Plane
1906029
Radial dimensions in a sketch don't scale properly when zooming in and out
1906858
1907059
1909482
Copy_Paste: Mapping Method - Create New creates dimensions with __ Used By...
1909813
1909938
1910505
1911974
Inherit PMI with all Geometry in the Reverence set still pops up message
1912033
1912478
1915754
1917144
1918722
Part family using linked body, create_update member does not update link
1920506
1920912
1922960
Make Offset - Step function in View Section dialog work with Handle Dragging
1926270
1926519
Creating 1 weld point using the Weld Point-command with the Option Guide Curve
1927010
1928352
1928560
1929077
1929181
1930768
1932213
NX 6 model in NX 8.5: Deleting tagged Feature does not delete the Face attributes
1932413
1933295
1934148
1934615
Update of attributes in the mirrored part is not done if the mirrored part is
1936242
RNI Option 4 _ Native MultiCAD: WAVE Links "Out of Date" without modification
1936315
1936844
1937056
1937475
Fail to open part, get message "Attribute units are invalid (not known in this phase)
1937524
1937928
1938523
1939317
1939430
Stress results incorrect when plotted with respect to the material CSYS
1940021
1940261
1940267
1940480
NX 8.5 Save assembly omits partname of newer component part in error message
1940561
1940712
Assembly Navigator position column show wrong symbol after adding std.comp
1940955
1940975
1941010
RNI Option 4 _ Native MultiCAD: Lightweight Bodies of JTs shine through in Dra
1941113
1941263
1941363
1941764
1942445
1942600
1942607
1942701
1943260
1943610
1943630
1943640
1943655
1943662
1944121
1944240
1944780
1944945
1945187
1945567
1945682
1945695
1945708
Dimensions are not updating correctly in exact view after replacing component
1945883
During replacing boundary face, the system ask to all wave links
1945893
Up to Date Status is not correct especially when features reference Broken Links
1945903
1945906
1945924
Penetration depth fails when Entire Part used and MODEL ref set empty
1945936
Inserting new points into existing spline can cause spline to twist_knot
1945938
Spline Path dialog always resets Selection bar to turn Point on Curve off
1945945
1945958
1945995
Replace Component for component pattern master does not replace instances
1946035
1946076
1946091
1946125
1946230
1946244
1946285
1946287
1946294
1946305
1946314
1946319
Place Part using Absolute Origin causes Unexpected Null Pointer error
1946357
1946370
It is not possible to change the symbol during edit a mark joint feature
1946383
1946435
1946521
1946652
1946839
1946865
1946988
Fillet Weld "First leg" parameter got inconsistent decimal separator when listed
1947092
1947198
Bei Baugruppen wird kein neues Model Reference Set beim Speichern erzeugt
1947342
1947633
Running ugtopv.exe does not report INFO 3110 and 3180 messages
1947706
1947952
1948060
1948111
1948478
1948482
1948582
1948590
Floor_Wall milling not honour exact positioning when unilateral in_out tol used
1948660
1948717
1948763
DXF DWG: export from existing part to 2D -> Encountered unexpected NULL pointer
1948809
1948870
1948889
1948977
1949013
RNI Option 4 _ Native MultiCAD: Position Dependent WAVE Link to Body breaks
1949061
1949146
LOV does not show in the NX Manager Portal from the Pulldown
1949246
1949257
1949279
1949295
NX crashes while exporting a JT File with "3" character Text feature in Osifont
1949324
1949339
1949343
1949409
1949441
Tracking Point changes its position after generate operation under a new tool
1949499
1949564
1949760
1949777
1949801
1949811
1949829
1949863
1949865
1949870
1950043
1950104
1950193
1950238
1950243
The process cannot access the file because it is being used by another process
1950303
1950306
1950307
1950389
1950443
1950508
1950617
1950730
Drawing from Wireframe very slow using new exact view -> Working not possible
1950745
1950991
Electrode Design "Trim Solid" always assigns 50% Translucency to body faces
1951151
1951248
1951286
1951338
1951365
1951414
1951463
1951557
1951685
1951730
Fitting Overstock placed incorrectly if overstock faces not it active ref set
1951751
1951762
1951842
1951929
1951958
1952081
1952133
1952335
Array attribute with same title, OWNING_SITE, as the given non-array attribute
1952410
1952678
1952702
1952902
1952933
1953196
1953249
1953262
1953279
1953335
1953452
1953453
1953460
1953474
1953483
Update IPW from Source does not work inside a Master Model Assembly
1953600
1953731
1953771
Tool path simulation with Collision Detection and IPW gives signal 11
1953879
'Edit Reusable Component' does not appear in Teamcenter for imported reuse comps
1953973
1953974
1953979
1954001
1954003
1954026
1954041
1954043
1954044
1954045
A linked element should never get the feature name of the source element
1954055
1954081
1954091
1954103
1954128
1954129
1954139
Sort Method setting for Part Navigator is not in the right place
1954143
1954163
1954208
No interference found when lightweight bodies are not in Model Reference Set
1954214
1954238
1954241
1954250
1954257
1954274
1954283
Creating_1_weld_point_using_the_Weld_Pointcommand_with_the_Option_Guide_Curve
1954299
1954308
1954315
1954322
1954358
1954372
1954379
1954440
1954443
1954445
1954450
1954477
Independent change in source causes out of date part with missing references
1954490
1954509
Product Interface objects from NX 8.x not visible in WAVE Interface Linker
1954515
1954520
1954522
1954528
Problem with Part Navigator and attribute columns names with underscores
1954548
1954550
1954552
1954564
1954568
1954583
1954588
1954599
1954610
1954649
1954668
1954696
1954715
1954804
1954832
1954927
Poor performance editing laminate global lay-ups and with 'compute zones' command
1954959
Tilt tool axis automatically the when used clearance Option Bounding Box
1955042
Gouge check is very slow, when the tool axis isn't in Absolute CSYS Axis
1955371
1955588
1955707
Export Assembly with load option As Saved but the log file shows Latest Working
1955746
1955833
1955893
1956150
1956224
1956557
Title block disappears after Show Only in Assy Navigator is done in modeling
1956609
1956686
1956688
1956747
1956822
1956911
Internal error: memory access violation after element copy & translate
1956937
1956955
Editing control type a styled blend to Tube Radius changes shape of blend
1957001
1957032
1957069
1957116
1957299
Attribute mapping does not appear directly after creating a new drawing (UGPart)
1957326
1957333
1957361
1957513
1957791
1957804
1958078
1958205
1958217
1958485
1958643
NX 9 sketch limits & fit tolerance show empty deviation & grade fields upon edit
1958725
1958864
1958961
1959063
1959116
1959493
1959522
1959574
VDA Check need more than 32 GB Memory for a curve with 31 elements
1959574
VDA Check need more than 32 GB Memory for a curve with 31 elements
1959577
1959692
1959715
1959731
1959736
No preview images in Reuse Library shown for PDW standard parts from TC
1959786
1959815
1959886
1959901
1959910
Error 1770003 comes up after using a Library Tool whith desired Spindle Group
1959951
1959981
Bumper and Crash Barrier do not refer to the selected loading in the Base data
1960191
1960324
1960454
1960845
1960888
1961247
1961327
1961520
1961573
1961948
1962171
1962349
1962616
1962630
NX Motion Export: incorrect VRML animation and missing objects in the vrml file
1963372
Unable to query simulation results at given locations due to NX9 internal error
1963705
1963766
1964075
Comp will be saved in JT, even though it224s on a layer which won224t be transferred
1964228
1964281
1964311
1964421
1964476
1964483
1964484
1964489
1964494
1964497
1964500
1964501
1964502
1964503
1964506
1964791
1964814
1964816
1964850
1964960
1965056
1965106
1965125
1965198
Bad display after Create New Parent and Creating LW Section View
1965328
Time stamp changing and Alert after Creating Linked Mirror Part
1965556
1965567
1965605
1965775
Edit parameters of Hole Series feature does not update all parts in assembly
1965797
1965800
1965856
1965867
Dynamic measure in Assembly sequence does not work (is not shown)
1965876
NX Session hangs while creating PMI -- Radial Dimension with static wireframe
1965897
1966018
1966080
1966188
1966283
CSE crash with C++ error due to wrong variable format in siemens840d.ccf
1966505
1967169
1967970
AttriMapping does not work for Item types not available from Display Rules
1968036
2103147
2146943
Journal playback will not create the patch with "Mold Wizard Face Patch"
2147857
Modify Part Preview option does not change Modified Status of part
2159468
2162891
2164866
2165740
Patch Opening can not be updated automatically after "Edit with Rollback"
2171725
2172807
2176652
UG Part attributes sync does not happen for Items hidden using display rules
2178538
2179412
2180986
2182954
2186588
SST CSW: NX Crash when de-selecting a section curve during edit Extrude Feature
2186647
CPJ:Incorrect location placing PMI dimension using Datum plane and Solid Edge
2187291
2190448
2191429
2196229
2196705
2196858
Incorrect mark for 'Fullyconstrainted' in ANT when partfamily values are applied
2197431
2198637
2199083
2199790
2200008
Attempt to free already free memory in Storage Manager error appears when PMI no
2200025
2201630
2201852
Create Spline path-Selecting Interpart edge for point on curve gives Int. error
2202611
2202821
2208776
2209481
2209823
2211023
2211464
2211721
2211773
2213373
Attribute added to Bend using the Attribute Templates is not displayed in proper
2213450
2213918
2214655
2214767
2215785
2216228
2216461
2216500
NX 8.5.2 iTest: Internal Error occurs when we select "Make Constant" in Transform
2216970
2217107
2217125
2217133
PS26.0.171 Error of Face Blend when playback the data of NX 7.5 in NX 8.5
2217347
X-form operation takes more time after [Apply] and [OK] compared to NX 8
2217396
2217437
2217620
2217630
Unable to open NX 6 files in NX 8.0.3, the following circular update was detected
2217789
2217790
2218071
2218318
PMIs specified by By Model View Name are not displayed in NX 9 Japanese mode
2218655
Unable to open the part file - Internal error : memory access violation
2219088
2219280
2219781
2220089
Transform path moves routing objects partially if other command is used in b_w
2220234
After creating and placing the text, It does not re-highlight in Note dialog
2220319
2220385
2220513
2220533
2220622
2220717
2220741
There is a problem with the layout of the new part created window
2220756
2221000
2221012
2221024
2221073
When you remove material from the local mesh is waiting to update
2221085
2221097
2221216
2221220
2221221
2221222
2221245
2221446
2221534
2221539
2222100
2222180
Hole milling - stock value inside the operation is not displayed in ONT
2222322
2222342
CPJ: DB ATT remains locked even after changing ownership of the component
2222497
2222500
2222557
2222558
2222623
2222652
2222685
2222777
2222906
2223076
2223104
2223120
2223129
NC: Editing drafting views raises "Internal error:Memory access violation" error
2223249
2223277
Trim Boundaries does not work with "Follow Cut" in Floor and Wall
2223413
2223445
Chamfer Dim Preview is displayed as different text alignment from specified style
2223463
Horizontal dimension will flip to vertical dimension when placing the dimension
2223465
2223468
2223471
2223478
2223480
2223484
2223526
2223533
2223549
2223570
2223595
2223600
2223603
2223605
2223620
2223651
2223692
Two dimension with same value get created for adding a point to Ordinate dim
2223713
Several features are Out of Date when editing a feature in Linked Part Module
2223727
CPJ: Cannot un-highlight the associative face of PMI dimension for Section View
2223748
2223824
Failed to create Electroed blank in NX 8 and NX 8.5 other than default blank material
2223870
tdf.exe has stopped Error is displayed on Modal Test data on loading unv files
2223980
2224254
2224301
2224305
2224320
2224322
2224436
2224589
Face Mill preview, it will automatically display the object in other layers
2224639
The analysis result of "UNITS (mm (kilogram f))" is not imported correctly
2224651
Flow cut reference tool operation results Internal Error and More Calculation time
2224846
2224888
2225036
2225089
2225107
Japanese characters are garbled when running Gouge Check with non-uniform stock
2225177
2225206
2225244
2225355
2225434
2225465
2225520
2225527
2225537
2225543
2225558
2225729
2225867
2225888
2225897
2225945
2225978
2226110
Cannot edit the stock size in NX 8.5.2, and NX 7.5 works fine
2226128
NC path is not considered the boundaries specified in Ignore Loops in Cut Area
2226177
2226239
If Feature attribute title contains '_', title name is lost when restart NX
2226344
2226411
NX takes too long time to change the 'Rendering Style' from "Static Wireframe"
2226455
An alert occurs "Target body completely inside tool body" when Unite
2226733
2226771
Spot weld mesh not created on the selected edge & also duplicate element created
2226772
2226927
2226996
2227110
Iif part has very large size, the truncated error will cause problem
2227142
Warning occurs in GROOVE_MILLING with "Center Alternate, Floor first" level seq
2227296
2227389
CPJ : Extrude section are lost the project curve of associativity after edit par
2227411
2227447
2227520
2227562
NX terminates when 0 is set in "Cutt Between Levels" and generates the tool path
2227565
Created Slug Holes have not been placed under right parent automatically
2227880
2227979
2228109
2228139
2228163
Failed to select the font with Chinese name when add the technical note to NX
2228171
2228374
2228515
2228520
2228807
2228819
2229021
2229022
2229039
2229042
CPJ-VUP: UAD (NX9.0.1.1) Update drawing view causes Linear dimension changed
2229047
CPJ-VUP: UAD (NX9.0.1.1) Drawing Update causes Ordinate Dim origin is moved
2229185
2229223
2229224
CPJ-VUP: UAD (NX9.0.1.1) Drawing Update causes Dimension lost its associativity.
2229244
2229335
NX freezes when creating sketch dimension with selecting point of datum CSYS
2229364
2229411
An internal error occurs when Shop Doc in Batch Process is run by Foreground
2229431
2229432
2229436
2229771
A double byte character displays on the "name" of BC dialog. And error occurs
2229776
2229857
2230417
2230591
2230700
The problem by which value is 1000 times when multiplied by Function Multi Mat
2231577
2231591
2804381
Title block disappears after Show Only in Assy Navigator is done in modeling
3051259
5875663
Add Existing Component with Preview OFF does not display Cylindrical CenterLine
6035215
6163143
6450532
6506002
6562745
6562807
6572702
When Moving a component, the Snap parameters are not retained as expected
6593479
6600226
6615149
Linked body not updating from swapping component in part family spreadsheet
6627773
Surface Contour Transfer Rapid Common Clearance Plane set to Between Regions
6633591
6653681
4th axis (C) is adding 180 to position after tool chg even when set back to zero
6656632
6661839
WAVE target part updates when Delay Interpart _ Delay Geometry.. is set
6704098
6713949
When creating new part Information window doesnt appear after modifying shape
6717050
Interpart linked port is not created when Drag and drop from Reuse library
6726817
Interpolate tool axis option not working. Defined vectors not maintained
6728216
6740811
6744342
6755376
6757069
6760589
Hole creation fails if body is hidden but not with layer is off
6765647
Z-Level gouges Check Stock when Smoothing and Cut Between Levels is enabled
6781404
6787092
6788080
Projected Curve (Along Face Normal) has continuous result until edited
6799680
6806366
6806448
GetParameter(string) method for Start_End UDEs that are on Machine Control ops
6808397
Custom Symbol Library Installation Guide missing pre-requisited for TCIN install
6810816
Trying to swarf cone with contour profile and the system locks up
6812098
6819084
BIW LOCATOR when moving a Pin with only 1 direction toggle 2nd is added back
6828502
6829744
6841324
6843255
6850499
6855044
6864143
6865383
6867832
CAVITY MILL- operation cuts only part of specified cut area regenerated NX 8.5
6877437
No bend table to select from the preference dialog, no automatic bend created
6886055
6886681
6886940
6889228
6891696
6891901
After creating text and placing it, text does not re-highlight in Note dialog
6893323
6894006
6894568
6895012
6896623
6896656
Routing customer defaults are set as default for all applications "not good"
6896744
6897410
6897505
6898636
Titleblock does not get exported to PDF after Hide All and Show All
6900608
6901302
6901354
6902920
6903049
4GD: NX Load Option Structure Only Causes Subordinates To Display Below ReUse
DE
6904912
6905239
Filename must be unique within a data manager is raised opening new Revision
6906005
6906421
6907815
6907831
6908062
6909389
6909390
PRODUCTION WAVE 2: SDF Feature Update Errors - Trim Body feature fails update
6910090
Universal File import for SST does not import mat orientations correctly
6910694
6911835
6911843
6912880
6913393
6914727
6915556
6916155
6916490
6917852
6917970
Attribute units are invalid (not known in this part- error when opening assembly
6917986
6918367
NX: Save operation fails in the modeling application when saving pattern data
6919486
6920074
Weld Assistant: Patch F took longer to run CFF than Production (QC3540)
6920147
6920704
6920758
6920760
6921233
Welds show fixed in Part Navigator, but CFF shows errors (QC 3541)
6921640
6921846
6921928
Post Builder mom_coolant_mode does not get set with Coolant ON UDE option 'ON'
6922089
6922187
6922242
6923268
6923312
6923336
6923504
6923987
6924197
6924565
6924642
6924672
[V1] moving a RCP that connects two paths one path doesn't move & lose is ending
6924796
6925101
Getting 'Error occurred during display of part...' when switching from one part
6925321
6925390
6925394
6925401
6926199
Severe error encountered when running Check-Mate "Spell Check on Part Attributes
6926552
Importing part with CAM objects results in Invalid Record Number Error
6926584
6926741
NXOpen: Unable to obtain the components used to build a Weld Joint feature
6926747
Can no longer get the object w_the attribute from a note's associative text
6927130
6927279
Unable to force C axis rotation when machining pockets around a circular pattern
6927639
6928996
6929212
6929941
6930147
6930260
6930609
6930920
Tool and holder curves created on layer 254 after generating operation
6930927
6931678
6931905
Issue importing drawings from CGMs, we are getting all lines as solid lines
6932100
6932893
6933130
6933428
6934311
Getting "An attempt was made to associate an object with a second other object"
6934724
Make next feature current causes objects to move to the work layer
6934908
6935450
6935541
4GD-Info on wave linked feature incomplete, only shows source object info
6935883
6935901
6935942
6935964
PS26.1.135 fix Part will not play back in NX 8 that would in NX 7.5
6935968
6935986
6935987
VTK10.06.003 fix Part will not play back in NX 8 that would in NX 7.5
6936023
6936072
6936614
6937054
6937144
6937534
6937547
NX Routing Move Part does not repair missing constraints in NX 8.5 like NX 8.0
6938097
6938152
6938242
6938296
6938625
6939092
6939291
6939350
2D Centerline used to dimension Flange radius sends leader endpoint into space
6939659
Creating angular dimension in NX 8 and later fails to work like earlier releases
6939669
6940132
6940205
6940309
6940349
#NAME?
6940456
6940772
6940819
6940822
6940861
Floor wall milling sets component level to visible only when picking cut area
6941361
Floor Wall operation does not warn user if floors are not at the same tool axis
6941404
6941621
6941709
6941819
6941865
6941980
6942093
6942434
6942468
Drawing Booklet creation in 4GD throws Internal Error: Memory Access Violation
6942987
6943094
6943576
6943750
6944004
6944081
6944144
6944879
6945122
6947028
Open part fails with "Filename must be unique within data manager" error
6947399
6947911
6947926
6948564
6948583
6948932
6949516
Attempt to set a two way reference; Part Cleanup > Clean Manu Objects message
6949791
6950174
6950332
6950797
6950917
6950931
6951384
6951954
Hole_boss operation drills same Solid Edge ST6 threaded holes to differnt depths
6952638
Holemaking creates a new G8x cycle output for every single hole
6952935
Save All fails message for assembly containing read only parts
6953406
6953750
Can't create plate feature using single curve when defining boundaries
6954125
6954638
6954723
Licence Error is raised when setting Type Filter to Solid and using MB3
6955744
6956960
Intersection Curve direction flips every other time when datum location changes
6957137
NX 9 Displays "License Server System Does Not Support This Feature (-18)" error
6957486
6957758
6958479
6959273
6959369
6959652
NX License Error
6959654
NX License Error
6960614
6962625
6962741
6963724
6968251
6968767
6968863
6969812
Editing and saving a part shows "Attempt to save bad pointer, save aborted" error
6971055
6975862
'Verify -> 2D Dynamic -> Play -> Compare' does not report gouges in red NX 9
6978542
6978591