Beruflich Dokumente
Kultur Dokumente
RSF-AT-20 (P)
RSF-AT-20 (P)
APPLICATION Cationic finishing softener for all types of fabric like Woven Cotton, Cotton Knits, Velvet, Garment, Polyester and blends for exhaust as well as padding applications. CHEMISTRY FOR PERFORMANCE Excellent softness and superior surface smoothness, with good bulk. Less yellowing and better hydrophilicity than cationic flakes. Retains brilliancy. Can replace 1 Kg of cationic flakes by 2.5 kg of RSF-AT-20 (P) with much better performance No tonal variation Easy dilution CHEMISTRY FOR ECONOMICS Product gives good cost saving with performance due to lower dosage. PHYSICAL PROPERTIES Product Appearance pH Pack Size 60 kg open mouth HDPE Carboy
Combination of non-ionic polymeric specialty softener with cationic, Creamish paste Bio-degradable & eco-friendly
5.0-6.0
Substrate Woven Cotton Cotton Knits Cotton Knits Polyester & its blends
Doses (after 1:10 dilution) 30 -80 gpl 30 -100 gpl 1 -3 % 10 -30 gpl
Special Note Higher the temperature of curing better will be the result. Our softener will show expected result after complete conditioning of the fabric. The dose level is to be decided as per the individuals requirement and their finishing cost. The dose level of our product is quite low and hence is economical with good results. Higher performance can also be achieved by blending with silicones and cationics.
* The literature indicates general information guidelines on our product for their use. The user should check the suitability of the product for their use. RAN/RSA makes no warranty of any kind expressed or implied. Industrial safety practice is to be followed. RAN/RSA takes no responsibility and expressly disclaim liabilities for law, damage or expense rising out of or in any way connected with the handling, storage, use or disposable of the product.