th sett|ement, 1183S, New Ca|ro, Lgypt 1e|:+20100S006238 & +20229299708 www.consu|t|x-egypt.com
WRX-33-4B 4 Channels Wireless Receiver
User Manual (V2)11-12
8u||d|ng 162, Mehwar Mubarak , L|-1eseen st., |n front of AUC Gate 4, S th sett|ement, 1183S, New Ca|ro, Lgypt 1e|:+20100S006238 & +20229299708 www.consu|t|x-egypt.com Copyright 2011 Consultix Company All Rights Reserved No part of this manual may be produced or transmitted in any form or by any means without prior written consent of Consultix.
Trademarks Consultix is a trademark of Consultix Egypt Company. All other trademarks mentioned in this manual are the property of their respective holders.
Notice The information in this manual is subjected to be changed without notice. Every effort has been made in the preparation of this manual to ensure accuracy of the contents, but all statements, information and recommendations in this manual do not constitute the warranty of any kind, expressed or implied.
8u||d|ng 162, Mehwar Mubarak , L|-1eseen st., |n front of AUC Gate 4, S th sett|ement, 1183S, New Ca|ro, Lgypt 1e|:+20100S006238 & +20229299708 www.consu|t|x-egypt.com 1. ()&*)+&,
!"!" #$%&'()*%+'$ Consultix WRX-33 family constitutes single and multiband wireless receivers that measure a CW (Continuous Wave) signals in most of wireless bands. It is magnificently accurate, lightweight, and compact. The unit is operated with an ergonomic man- machine-interface, modular in design, S/W upgradeable to save users investments and enhance users logistics cycle. WRX-33-4B models comes with internal result storage for up to 7 hours continuous measurements.
!"," ./0 1/2%)&/3 1- Receiving mode: CW signals. 2- Receiving Bands: all of wireless bands from 200 MHz to 2700MHz as per ordered unit. 3- Internal Result Storage for 7 hours 4- PC S/W (optional) for data capture, archiving , mapping, replay , and export 5- Level ranges from -110 dBm up to -40 dBm. 6- Adjustable channel frequency. 7- Frequency step: 100 KHz (Optional 1 KHz). 8- Power accuracy Less than 1 dBm. 9- Memory channels. 10- Light weight. 11- Ergonomic user interface. 12- Functional Keypad. 13- LCD display. 14- Battery operated 15- Internal memory stores up to 7 hours of continuous measurements
8u||d|ng 162, Mehwar Mubarak , L|-1eseen st., |n front of AUC Gate 4, S th sett|ement, 1183S, New Ca|ro, Lgypt 1e|:+20100S006238 & +20229299708 www.consu|t|x-egypt.com
!"4" 521/%0 6'789+2$*/3 : ;&/*2)%+'$3 To use the WRX-33 in a correct, efficient, safe way, and to avoid damage caused by improper actions, you are recommended to: 1- Use only the original accessories to prevent any damage to the device. 2- To not affect the radiation pattern, don't touch the antenna during operation. 3- It is preferable to connect the antenna and test environment before starting a measurement scenario. 4- Don't let water or other liquids flow into the device. 5- Prohibit approaching the device to flammable or explosive items. 6- Don't open the device outside company maintenance branches. 7- For the first time usage of the device, battery should be charged continuously 10 hours before usage.
8u||d|ng 162, Mehwar Mubarak , L|-1eseen st., |n front of AUC Gate 4, S th sett|ement, 1183S, New Ca|ro, Lgypt 1e|:+20100S006238 & +20229299708 www.consu|t|x-egypt.com - .&%/0 1 2$'%3443%+#$
,"!" 6</*= %</ 82*=2>/ Please make sure that you received all the parts shown below. If any piece is missing, please call your agent or our customer services.
1. WRX-33 . 2. SMA male Antenna. 3. Charger. 4. User manual. 5. Walk-View software CD (optional). 6. Data cable for Walk-View software (optional). 7. Carrying bag
1. W1x-03 2. AnLenna 3. Charger
8u||d|ng 162, Mehwar Mubarak , L|-1eseen st., |n front of AUC Gate 4, S th sett|ement, 1183S, New Ca|ro, Lgypt 1e|:+20100S006238 & +20229299708 www.consu|t|x-egypt.com ,"," ?&'$% 82$/9
The figure below shows the Front panel of the WRX-33.
8u||d|ng 162, Mehwar Mubarak , L|-1eseen st., |n front of AUC Gate 4, S th sett|ement, 1183S, New Ca|ro, Lgypt 1e|:+20100S006238 & +20229299708 www.consu|t|x-egypt.com ,"4" ./082( @)%%'$3 1)$*%+'$3
The following figure summarizes the WRX-33 Keypad buttons' functions.
(1) (2) (3) (4) (5) (6) (7) (8)
8u||d|ng 162, Mehwar Mubarak , L|-1eseen st., |n front of AUC Gate 4, S th sett|ement, 1183S, New Ca|ro, Lgypt 1e|:+20100S006238 & +20229299708 www.consu|t|x-egypt.com (1) ON/OFF: Switching on & switching off the device by long press (1 second press) (2) Num pad: Writes numbers, characters or space (3) Escape: Goes to previous menu, cancels input data, or terminates a measurement scenario. (4) Save: Saves the current measurement scenario with its Freq, Amp, Date, and time (5) : Enters (-and .), edits the name of saved channels, or toggles button in the setting menu (6) Enter: Enters to sub menus, accepts choice, or enters settings data (7) Up & Down arrows: Moves up and down or fine tuning of frequency (after clicking the hard button Edit as per (5) above) (8) Run: Starts measurement
,"A" B+38920 #*'$3 The following figure illustrates the main display icons
(1) Menu Choices (2) Charging indicator (3) Menu title (4) Battery indicator
(1) (4) (2) (3)
8u||d|ng 162, Mehwar Mubarak , L|-1eseen st., |n front of AUC Gate 4, S th sett|ement, 1183S, New Ca|ro, Lgypt 1e|:+20100S006238 & +20229299708 www.consu|t|x-egypt.com 5 6&$&*34 (0&*3%+#$' 4"!" ;&/82&2%+'$3 -Connect the charger into its socket. * Note: for the first time usage of the device, battery should be charged continuously 10 hours before usage. -Connect the antenna to the device. -Switch On the device by long press on the On/OFF switch. The device now is ready to start measurement. In the following section, the menus of the WRX- 33 will be described in details before illustrating How to start a test. 4"," C/$)3 Main Menu Start Test :To start a test configuration as follows: Date: Appears on the top left of the screen , shows the current date of the measurement . Time: Appears at the top right of the screen, shows the current time of the measurement. Freq: Sets the measurement frequency in MHz Amp: Shows the received signal level in dBm
Autonomous: This menu contains the settings of the test result to be saved on the receiver menu.
Setting: To change the unit settings as follows: Back light: This function is used to enable or disable the LCD backlight for the device. To toggle between On/OFF options, use the edit (-/.) button Date: This function is used to set the current date in the format DD- MM-YY. To write new date press Enter or (-/.) button, then write the date using the num pad.
8u||d|ng 162, Mehwar Mubarak , L|-1eseen st., |n front of AUC Gate 4, S th sett|ement, 1183S, New Ca|ro, Lgypt 1e|:+20100S006238 & +20229299708 www.consu|t|x-egypt.com Time: This function is used to set the current time in the format HH-MM-SS. To write a new time, press Enter or (-/.) button, and then write the date using the num pad. Factory setting: This function is used to restore WRX-33 factory settings. It will delete all saved test channels from your device Battery Status: Provide the battery voltage and withdrawn current from the battery Version/Upgrade: - Providing info about activated features, and available upgrades - Entering key-codes required for any newly purchased upgrade Memory Status: Shows the used and free memory space. Press 5 to clear the used memory
8u||d|ng 162, Mehwar Mubarak , L|-1eseen st., |n front of AUC Gate 4, S th sett|ement, 1183S, New Ca|ro, Lgypt 1e|:+20100S006238 & +20229299708 www.consu|t|x-egypt.com 4"4" C/23)&/7/$% 5*/$2&+'3 3.3.1 Start a measurement scenario -You may directly press the hard button RUN to make a hot start, or - From the main menu, use up & down arrows to choose Autonomous, and then press Enter button. In this mode, the device saves the measurements for the 4 channels in the device memory. - Using the Num Pad enter the desired measurement frequency in MHz for every channel, and then press Enter button. At the bottom box, You will notice either the word Peak or average. We take around 200 sample per each channel per second. This choice is to choose between either to present the peak sample or average across the second. Toggle between peak or average by pressing the dot ( . ) button
- The corresponding Power level will be displayed on the screen in dBm. -Finally Name the test in the box below frequencies -Press RUN, then it starts capturing -At every marker ( change in direction or path), press save . Then you will see a marker increment at the bottom of the screen -Press Enter once finished 3.3.2 Save a measurement scenario To save the measurement scenario which you got in section 3.3.1: - From the keypad press Save button. - A default name will appear on the screen. To change it press the hard button ./-then write your desired name, and then press the Enter button. 3.3.3 View saved measurement scenarios To view saved measurements kindly connect the device to Walk-View software through a mini USB-B cable. You can view the measurements and put them on a map.
8u||d|ng 162, Mehwar Mubarak , L|-1eseen st., |n front of AUC Gate 4, S th sett|ement, 1183S, New Ca|ro, Lgypt 1e|:+20100S006238 & +20229299708 www.consu|t|x-egypt.com 78 .0&9+:+93%+#$' RF Characteristics Internal Frequency Accuracy 1 PPM Frequency Bands From 200 MHz to 2700 MHz (in certain bands as per ordered unit) Frequency Step 100 KHz (optional 1KHz) Modulation CW Level range -110 to -40 dBm Level measurement Accuracy <1 dBm Phase noise <-60 dBc at 10KHz offset Measurement speed 800 points per second RF output 50 ohm RF interface 50 ohm SMA Female PC interface USB Power supply Power Consumption <3.5 Watts DC Input 12 VDC, 2 A charger Battery 7.2 V, 2.2 A Li-ion chargeable battery Battery standby time 500 hours Battery time @ continuous maximum output power >3 Hours Physical External Dimensions L220 x W116 x H51mm Charger interface Power Jack male 2.1 mm ID 5.5 mm OD Antenna interface TNC Female Weight 610gm Operating Temp -10 to +40 C
8u||d|ng 162, Mehwar Mubarak , L|-1eseen st., |n front of AUC Gate 4, S th sett|ement, 1183S, New Ca|ro, Lgypt 1e|:+20100S006238 & +20229299708 www.consu|t|x-egypt.com
Further Help
-For any support inquiry, kindly contact: Support: support@consultix-egypt.com Hotline support: +20229299708 Or contact our distributer covering your region (check www.consultix- egypt.com) -For any information about prices, specifications, future developments, recommendations, customizations, or general question, kindly contact: Sales: Sales@consultix-egypt.com